Scribd
Upload
19 views2 pages

Block Heater - Gasoline Engines

Uploaded by

andyjberry96
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
19 views2 pages

Block Heater - Gasoline Engines

Uploaded by

andyjberry96
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

303-03 Engine Cooling 2004 F-Super Duty 250-550/Excursion

REMOVAL AND INSTALLATION Procedure revision date: 05/24/2003

Block Heater — Gasoline Engines

Material
Item Specification
Premium Long-Life Grease ESA-M1C75-B
XG-1-C or K or equivalent

Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Section 100-02.

2. Drain the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding in this section.

3. Disconnect the (A) block heater wiring from the (B) block heater.

4. Remove the block heater.

1. NOTICE: Do not loosen the block heater screw more than necessary for removal.

Loosen the screw.


2. Twist and slide the block heater to release the retainer clip and remove. Discard the retainer clip.
5. NOTE: To ease installation, coat the block heater seal and the cylinder block hole with grease.

To install, reverse the removal procedure.


© Copyright 2022, Ford Motor Company.

You might also like