DATA siegling transilon
SHEET
conveyor and processing belts
Product Data Sheet
E 15/M V1/V10H MT black
Order information
Article number 900073
Suitable for corrugated side walls On request
Standard delivery width 2100 mm / 82.68 in
Longitudinal seam possible Yes
Construction
Top face material Polyvinyl chloride, hard
Surface pattern Matt
Coating thickness 1 mm / 0.039 in
Color Black
Driving face material Polyvinyl chloride, hard
Surface pattern Fabric, coarse
Coating thickness 0.1 mm / 0.004 in
Color Black
Tension member material Conditionally laterally stiff solid-woven fabric
of polyester warp and weft
Number of fabric plies Multi-layer
Driving face weave Solid-woven fabric
Remarks to tension member Exceptionally strong and wear-resistant
fabric design
Siegling - total belting solutions Seite 1/3
DATA siegling transilon
SHEET
conveyor and processing belts
E 15/M V1/V10H MT black
Technical data
Total thickness 5 mm ± 0.2
0.197 in ± 0.008
Weight 5.6 kg/m² ± 0.4
1.147 lbs/ft² ± 0.082
k1% value relaxed (effective pull at 1% 11.5 N/mm / 65.67 lbf/in
elongation), established in line with ISO
21181:2005
Recommended Elongation at fitting min. 0.3 %
Recommended Elongation at fitting max. 1 %
Friction coefficient of driving face against 0.25
steel panel according ISO 21182
Friction coefficient of top face against 0.5
steel panel according ISO 21182
Permissible operating temperature -10/70 °C, for a short time 90 °C
14/158 °F, for a short time 194 °F
Hardness of top face coating as per DIN 88
53505 (Shore A)
Properties
Lateral stiffness Conditionally laterally stiff
Troughable Limited
Suitable for accumulation Yes
Inclined conveying No
Suitable for knife edges No
Suitable for curves No
Flame-retardant No
Noise development Normal
Coating/fabric exceptionally cut resistant Yes
Belt support Slider bed (support rollers possible)
Siegling - total belting solutions Seite 2/3
DATA siegling transilon
SHEET
conveyor and processing belts
E 15/M V1/V10H MT black
Electrostatic properties
Antistatic Belt material with an electrically conductive
antistatic agent. Volume resistance (RDi) in
longitudinal direction parallel to plane of belt
< 3 x 10⁸ Ω. Measurement according DIN EN
ISO 21178.
Fabrication
Belt edge sealing Smartseal
Suitable for corrugated side walls On request
Profiles on top face Yes
Profiles on underside Yes
Mechanical fasteners KS; HS-40; CS-07; HS-26; HS-22
Minimum drum diameter
Z-splice, counter-bending 125 mm / 4.9 in
Wedge overlap splice, counter-bending 160 mm / 6.3 in
Remarks
Chemical resistance VH
The physical data in this data sheet is approximate, can alter depending on production environments and was
established at standard ambient conditions (23°C/73°F, 50% relative humidity) in accordance with DIN
50014/ISO 554. Fluctuations in climate can cause variations. See our brochure <Technical Information 1= no.
317 which shows the types of belts that can be supplied and the manufacturing tolerances. Customised types
require written confirmation.
Date of last change: 9/4/2024 11:37:57 AM
Siegling - total belting solutions Seite 3/3
