DATA siegling transilon
SHEET
conveyor and processing belts
Product Data Sheet
E 4/2 U0/U0 transparent FDA
Art. No.: 900206 M 1:2
Applications
Bakery industry Baked products conveying at large
production widths; Dough conveying
Food industry Accumulation belt / Discharge belt;
Packaging machines for unpacked food
Plastics / Chemical /Electronics industry
Tyre industry Calendering; Rubber extrusion & cooling;
Tyre building; Tyre cord cutting
Wood industry
Application Group Mini conveyor (see remarks)
Order information
Article number 900206
Suitable for corrugated side walls No
Standard delivery width 3200 mm / 125.98 in
Maximal delivery width (without 4750 mm / 187.01 in
longitudinal seam) on request
Longitudinal seam possible No
Siegling - total belting solutions Seite 1/4
DATA siegling transilon
SHEET
conveyor and processing belts
E 4/2 U0/U0 transparent FDA
Construction
Top face material Polyurethane impregnation
Surface pattern Fabric
Color Transparent
Driving face material Polyurethane impregnation
Surface pattern Fabric
Color Transparent
Tension member material Laterally stiff fabric of polyester warp and
weft
Number of fabric plies 2
Driving face weave Plain weave
Technical data
Total thickness 1.15 mm ± 0.1
0.045 in ± 0.004
Weight 1.1 kg/m² ± 0.1
0.225 lbs/ft² ± 0.02
k1% value relaxed (effective pull at 1% 3.75 N/mm / 21.41 lbf/in
elongation), established in line with ISO
21181:2005
Recommended Elongation at fitting min. 0.3 %
Recommended Elongation at fitting max. 1 %
Friction coefficient of driving face against 0.15
steel panel according ISO 21182
Friction coefficient of top face against 0.13
steel panel according ISO 21182
Permissible operating temperature -30/100 °C, for a short time 120 °C
-22/212 °F, for a short time 248 °F
Thermal conductibility 100 W/(K*m²)
Siegling - total belting solutions Seite 2/4
DATA siegling transilon
SHEET
conveyor and processing belts
E 4/2 U0/U0 transparent FDA
Properties
Lateral stiffness Laterally stiff
Troughable No
Suitable for accumulation Yes
Inclined conveying No
Suitable for knife edges Yes
Suitable for curves No
Flame-retardant No
Noise development Normal
Belt support Slider bed (support rollers possible)
Food properties
(EU) 10/2011 and (EC) 1935/2004 Suitable for the transport of unpacked Food
in compliance with food safety regulation
(EU) 10/2011 and regulation (EC) 1935/2004
FDA 21CFR Suitable for the transport of unpacked Food
in compliance with FDA regulation 21CFR
MHLW 370 Compliant to the regulation MHLW 370
(Ministry of Health and Welfare Notification
No. 370) for the transport of unpackaged
foodstuffs.
Halal Certificated Halal product. Meets trade
description order 2011 and CODEX
Alimentarius 1997 guidelines under
supervision of Islamic Food Research Centre
Hong Kong & Asia Region
Electrostatic properties
Antistatic Belt material with an electrically conductive
antistatic agent. Volume resistance (RDi) in
longitudinal direction parallel to plane of belt
< 3 x 10⁸ Ω. Measurement according DIN EN
ISO 21178.
Siegling - total belting solutions Seite 3/4
DATA siegling transilon
SHEET
conveyor and processing belts
E 4/2 U0/U0 transparent FDA
Fabrication
Belt edge sealing Smartseal
Suitable for corrugated side walls No
Profiles on top face Yes
Profiles on underside Yes
Mechanical fasteners KS; CS-05; HS-27
Minimum drum diameter
Z-splice, counter-bending 24 mm / 0.9 in
Stepped Z-splice, counter-bending 24 mm / 0.9 in
Wedge overlap splice, counter-bending 24 mm / 0.9 in
Z-splice, bending 14 mm / 0.6 in
Z-splice, minimum radius fixed knife edge 3 mm / 0.1 in
Remarks
► In case of using the material for a mini-conveyor application, give enough tension
to prevent slippage under maximum load.
Chemical resistance U0
The physical data in this data sheet is approximate, can alter depending on production environments and was
established at standard ambient conditions (23°C/73°F, 50% relative humidity) in accordance with DIN
50014/ISO 554. Fluctuations in climate can cause variations. See our brochure <Technical Information 1= no.
317 which shows the types of belts that can be supplied and the manufacturing tolerances. Customised types
require written confirmation.
Date of last change: 9/12/2023 7:48:27 AM
Siegling - total belting solutions Seite 4/4
