1. WHAT IS THE PRIMARY PURPOSE OF A CLAW HAMMER IN A WORKSHOP?

2. HOW IS A COMBINATION SQUARE DIFFERENT FROM A FRAMING

SQUARE?
3. NAME THREE COMMON TYPES OF SCREWDRIVERS AND THEIR TYPICAL
USES.
4. WHAT SAFETY PRECAUTIONS SHOULD YOU TAKE WHEN USING A
CHISEL?
5. EXPLAIN THE DIFFERENCE BETWEEN AN OPEN-END WRENCH AND A
BOX-END WRENCH.
6. WHAT IS THE PURPOSE OF A CARPENTER'S PENCIL, AND WHY IS IT
FLAT?
7. HOW DO YOU PROPERLY MAINTAIN AND SHARPEN A HAND SAW?
8. WHAT IS THE FUNCTION OF A BENCH VISE IN A WORKSHOP?
9. DESCRIBE THE DIFFERENCE BETWEEN A REGULAR TAPE MEASURE AND
A CARPENTER'S TAPE MEASURE.
10. WHEN IS IT APPROPRIATE TO USE A C-CLAMP IN WOODWORKING?
11. WHAT IS THE PURPOSE OF A COPING SAW, AND HOW IS IT DIFFERENT
FROM A FRET SAW?
12. HOW DO YOU DETERMINE THE RIGHT SIZE OF A SOCKET WRENCH FOR
A PARTICULAR NUT OR BOLT?
13. WHAT ARE THE KEY SAFETY PRECAUTIONS WHEN USING A UTILITY
KNIFE OR BOX CUTTER?
14. EXPLAIN THE PURPOSE OF A TRY SQUARE AND HOW IT IS USED IN
WOODWORKING.
15. WHAT ARE THE ESSENTIAL COMPONENTS OF A PLIERS, AND HOW ARE
DIFFERENT TYPES OF PLIERS USED?
16. HOW SHOULD YOU STORE AND CARE FOR A SET OF WOOD CHISELS?
17. WHAT IS A TORQUE WRENCH, AND WHY IS IT IMPORTANT IN
AUTOMOTIVE WORK?
18. DESCRIBE THE PROPER TECHNIQUE FOR USING A BENCH GRINDER TO
SHARPEN A TOOL.
19. WHAT IS A COPING FILE, AND HOW IS IT USED IN METALWORKING?
20. WHEN SHOULD YOU USE SAFETY GOGGLES OR GLASSES WHILE
WORKING WITH HAND TOOLS?
窗体顶端

1. THE PRIMARY PURPOSE OF A CLAW HAMMER IN A WORKSHOP IS TO DRIVE NAILS INTO

SURFACES AND ALSO TO REMOVE NAILS WITH ITS CURVED CLAW.
2. A COMBINATION SQUARE IS A VERSATILE MEASURING TOOL WITH A 90-DEGREE HEAD AND
AN ADJUSTABLE BLADE FOR VARIOUS MEASUREMENTS, WHILE A FRAMING SQUARE IS A
LARGER, L-SHAPED TOOL PRIMARILY USED IN CARPENTRY FOR RIGHT-ANGLE
MEASUREMENTS AND LAYOUT IN FRAMING AND STAIR BUILDING.
3. PHILLIPS SCREWDRIVER - TYPICALLY USED FOR PHILLIPS HEAD SCREWS.
FLATHEAD SCREWDRIVER - TYPICALLY USED FOR SLOTTED SCREWS.
TORX SCREWDRIVER - TYPICALLY USED FOR TORX HEAD SCREWS.
4. WEAR SAFETY GOGGLES TO PROTECT YOUR EYES FROM FLYING DEBRIS.
KEEP YOUR HANDS AND BODY BEHIND THE CUTTING EDGE.
USE A PROPER GRIP AND STRIKE THE CHISEL WITH A MALLET, NOT A HAMMER.
WORK ON A STABLE SURFACE OR USE A WORKBENCH WITH A VISE TO SECURE THE
MATERIAL.
KEEP THE CUTTING EDGE SHARP TO PREVENT SLIPPING AND MINIMIZE THE NEED FOR
EXCESSIVE FORCE.
 ALWAYS CUT AWAY FROM YOUR BODY AND MAINTAIN PROPER CONTROL.
5. AN OPEN-END WRENCH HAS U-SHAPED JAWS FOR A WIDER RANGE OF FASTENER SIZES BUT
PROVIDES LESS GRIP, WHILE A BOX-END WRENCH HAS ENCLOSED, RING-SHAPED JAWS FOR
A BETTER GRIP ON FASTENERS BUT TYPICALLY FITS A SINGLE SIZE OR A LIMITED RANGE.
6. A CARPENTER'S PENCIL IS USED IN WOODWORKING AND CONSTRUCTION FOR MARKING
AND DRAWING ON VARIOUS MATERIALS LIKE WOOD, DRYWALL, OR CONCRETE. IT IS FLAT
TO PREVENT ROLLING AND TO CREATE A WIDER, MORE STABLE MARKING LINE, WHICH IS
EASIER TO SEE AND FOLLOW DURING WORK.
7. PROPER MAINTENANCE AND SHARPENING OF A HAND SAW INVOLVE REGULARLY CLEANING
THE BLADE, USING A SAW FILE TO SHARPEN THE TEETH, AND MAINTAINING CONSISTENT
TOOTH GEOMETRY FOR EFFECTIVE CUTTING.
8. A BENCH VISE IN A WORKSHOP IS USED TO SECURELY HOLD AND IMMOBILIZE WORKPIECES
WHILE PERFORMING TASKS LIKE CUTTING, SHAPING, OR ASSEMBLING, PROVIDING STABILITY
AND PRECISION DURING VARIOUS OPERATIONS.
9. A REGULAR TAPE MEASURE TYPICALLY HAS MEASUREMENTS ON ONE SIDE IN BOTH METRIC
AND IMPERIAL UNITS AND IS DESIGNED FOR GENERAL MEASURING PURPOSES. IN
CONTRAST, A CARPENTER'S TAPE MEASURE OFTEN HAS MEASUREMENTS ON BOTH SIDES,
WITH LARGER, EASY-TO-READ MARKINGS ON ONE SIDE FOR QUICK, ROUGH
MEASUREMENTS, AND SMALLER, MORE PRECISE MARKINGS ON THE OTHER SIDE FOR
DETAILED CARPENTRY WORK. IT MAY ALSO HAVE ADDITIONAL FEATURES LIKE BUILT-IN
PENCIL SHARPENERS OR MARKINGS FOR ON-CENTER SPACING.
10. A C-CLAMP IS APPROPRIATE TO USE IN WOODWORKING WHEN YOU NEED TO FIRMLY
SECURE TWO OR MORE PIECES OF WOOD TOGETHER OR HOLD A WORKPIECE IN PLACE
WHILE WORKING ON IT. IT'S COMMONLY USED FOR TASKS LIKE GLUING, CLAMPING JOINTS,
OR AFFIXING A WORKPIECE TO A WORKBENCH TO PREVENT MOVEMENT DURING CUTTING
OR SHAPING OPERATIONS.
11. COPING SAW: CURVED CUTS IN WOODWORKING. FRET SAW: FINE, INTRICATE CUTS IN THIN
MATERIALS LIKE VENEER. COPING SAW HAS A U-FRAME, FRET SAW A C-FRAME.
12. TO DETERMINE THE RIGHT SIZE OF A SOCKET WRENCH FOR A NUT OR BOLT, USE A SET OF
MEASURING CALIPERS OR A WRENCH SIZE GUIDE TO MATCH THE WRENCH SIZE WITH THE
FASTENER'S HEAD OR NUT DIAMETER.
13. KEEP THE BLADE SHARP.
CUT AWAY FROM THE BODY.
USE A CUTTING SURFACE.
KEEP FINGERS CLEAR OF THE CUTTING PATH.
RETRACT THE BLADE WHEN NOT IN USE.
STORE IT SAFELY.
BE MINDFUL OF OTHERS IN THE WORKSPACE.
WEAR APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT, LIKE GLOVES AND EYE
PROTECTION.
14. A TRY SQUARE IN WOODWORKING CHECKS AND MARKS 90-DEGREE ANGLES. PLACE THE
HANDLE AGAINST A SURFACE, SLIDE THE BLADE, AND USE THE REFERENCE LINE FOR PRECISE
CUTS AND ALIGNMENTS.
15. PLIERS CONSIST OF TWO ESSENTIAL COMPONENTS: JAWS AND HANDLES WHICH BASICALLY
DETERMINES THEIR FUNCTIONS. NEEDLE-NOSE PLIERS: USED FOR PRECISION WORK,
GRIPPING SMALL OBJECTS, AND ACCESSING TIGHT SPACES. DIAGONAL-CUTTING PLIERS
(WIRE CUTTERS): IDEAL FOR CUTTING WIRES AND CABLES CLEANLY. SLIP-JOINT PLIERS:
VERSATILE PLIERS FOR GRIPPING, TWISTING, AND TURNING NUTS, BOLTS, AND FASTENERS.
16. TO CARE FOR WOOD CHISELS, KEEP THEM CLEAN AND DRY, SHARPEN THE EDGES
REGULARLY, AND PROTECT WOODEN HANDLES. PREVENT RUST BY APPLYING RUST-
RESISTANT OIL OR STORING IN A DRY PLACE. USE SAFETY CAPS WHEN NOT IN USE, AND
INSPECT FOR DAMAGE PERIODICALLY TO ENSURE SAFE AND LONG-LASTING PERFORMANCE.
17. IN METAL OR WOOD WORKSHOPS, A TORQUE WRENCH PLAYS A CRITICAL ROLE BY APPLYING
PRECISE TORQUE TO FASTENERS, ENSURING STRUCTURAL STABILITY AND SAFETY. WHETHER
IN CONSTRUCTING FURNITURE OR METAL STRUCTURES, IT PREVENTS OVER-TIGHTENING OR
UNDER-TIGHTENING, SAFEGUARDING PROJECT QUALITY AND LONGEVITY.
 18. TO PROPERLY SHARPEN A TOOL USING A BENCH GRINDER, PRIORITIZE SAFETY BY WEARING
GOGGLES, A FACE SHIELD, AND HEARING PROTECTION. SECURE THE GRINDER TO A STABLE
WORKBENCH, ENSURING THE TOOL REST IS CORRECTLY ADJUSTED. DETERMINE THE
CORRECT GRINDING ANGLE FOR YOUR TOOL AND MAINTAIN IT CONSISTENTLY. START THE
GRINDER, HOLDING THE TOOL SECURELY WITH BOTH HANDS. MOVE THE TOOL GENTLY
ACROSS THE GRINDING WHEEL IN CONTROLLED MOTIONS, PERIODICALLY DIPPING IT IN
COOLANT OR WATER TO PREVENT OVERHEATING. CHECK PROGRESS REGULARLY, ENSURING
THE DESIRED SHAPE AND ANGLE. QUENCH THE TOOL AFTER SHARPENING, AND CONSIDER
HONING IT ON A FINE-GRIT SHARPENING STONE FOR A REFINED EDGE.
19. A COPING FILE IS A METALWORKING TOOL WITH A CURVED PROFILE, IDEAL FOR SHAPING
AND SMOOTHING CURVED METAL SURFACES. TO USE IT, FIRMLY HOLD THE FILE'S HANDLE
AND APPLY IT TO THE METAL SURFACE, MOVING IT ALONG THE CONTOUR IN A CONTROLLED
MOTION. THE FILE'S CURVED SHAPE ALLOWS FOR PRECISE MATERIAL REMOVAL, MAKING IT
EFFECTIVE FOR ACHIEVING SMOOTH, ACCURATE CONTOURS IN APPLICATIONS LIKE PIPE
FITTING AND CRAFTING ORNAMENTAL METALWORK.
20. SAFETY GOGGLES OR GLASSES ARE CRUCIAL WHEN WORKING WITH HAND TOOLS IN
SITUATIONS INVOLVING FLYING DEBRIS, CHEMICALS, WOODWORKING, METALWORKING, OR
ANY POTENTIAL EYE HAZARDS. THEY PROVIDE ESSENTIAL EYE PROTECTION FROM PARTICLES,
CHEMICALS, AND OTHER HAZARDS, ENSURING YOUR SAFETY DURING VARIOUS TASKS.
窗体底端