Robust. Reliable.
Comfortable.
Radio Control DRC-DC
Quickly installed
and easy to handle!
The DRC-DC radio remote control system is the ideal solution for optimum ergonomic operation of Demag
high-performance DC chain hoists. They offer much greater flexibility than cable-connected control systems and
ensure that the operator can maintain a safe distance from the load at all times.
The DRC-DC system has been specially developed for the DC chain hoist. With transmitters available in two sizes, up
to two (DRC-DC 6) or three motion axes (DRC-DC 10) can be controlled. The particularly small receiver consists of a
circuit board which can be used in various mounting configurations. For chain hoist sizes DC 1 to DC 15, the
receiver is integrated into a housing and attached to the outside of the chain hoist. Pre-assembled cables facilitate
fast and easy connection to the hoist, crab or crane electrical equipment. For chain hoist sizes DC 16 and DC 25, the
receiver is inserted into the corresponding slot beneath the chain hoist electrical equipment cover.
STRONG AND ROBUST SAFE AND RELIABLE SIMPLE AND CONVENIENT
••Impact and temperature-resistant ••Reliable radio transmission thanks ••Ergonomic design
housing to frequency hopping ••Simple transmitter operation
••Integrated bumper ••Automatic frequency management ••High level of availability thanks to
••Display section for operating 2-hour fast charging of the trans-
statuses and battery capacity mitter battery or operation with
••Stop function according to EN conventional Mignon AA batteries
13849-1, category 3 PL c ••Worldwide postal authority appro-
val for operation without any need
for registration or operating fees
••Simple wireless hand-held trans-
mitter log-on
2
The electrical box is fitted to Demag DC chain hoists
the outside of the chain can be conveniently
hoist housing controlled from any
position using the
DRC-DC radio remote
control system
DRC-DC 6 PUSHBUTTON DRC-DC 10 PUSHBUTTON DRC-DC RECEIVER
TRANSMITTER TRANSMITTER ••Receiver board for installation
••Six buttons for two-stage control ••Ten buttons for two-stage control in or to DC chain hoists
of up to two motion axes of up to three motion axes
••Horn test button ••Horn test button RECEIVER ACCESSORIES FOR
••Stop button ••Stop button EXTERNAL FITTING TO CHAIN
••Weight incl. rechargeable battery ••2 pushbuttons for special functions HOIST SIZES DC 1 TO DC 15
410 g ••Weight incl. rechargeable battery ••Electrical box incl. transformer
••IP 55 enclosure 490 g board
••Temperature range –20 to +50 °C ••IP 55 enclosure ••Adapter plate and mounting
••Temperature range –20 to +50 °C material
••Pre-assembled power and
control cables for connection
to the chain hoist or crane
39602-5 39669-2 39613-1
3
Fax enquiry
+49 (0) 23 35 92 2406
I am interested in the DRC-DC radio remote control system for the Demag DC chain hoist.
Please contact me.
Please send me a quotation for the following application.
Details of the application
Size of the chain hoist Type of application *
DC 1 to DC 15 stationary (one axis)
DC 16 or DC 25 or with electric cross-travel drive (two axes)
Crane application (three axes)
- electrical long and cross-travel
- or crane with crane bridge enclosure
* Electrical equipment entirely of TriState design
Please send the quotation to:
Company
P.O. Box/Street
Town/post code
Contact
Telephone / extension
Telefax
E-mail
No liability for errors or omissions. Subject to change.
0718N EN/DE 213 647 44 701 IS 975
Printed in Germany DCC/310718/PDF
DEMAG CRANES & COMPONENTS GMBH
Wetter Site
Ruhrstraße 28
58300 Wetter / Germany
E info@demagcranes.com
T +49 2335 92-0
F +49 2335 92-7676
www.demagcranes.com
