Items in the Package communicate regardless whether the radio

supports BT feature or not.

Please unpack carefully and check that all
items listed below are received. If any item
is missing or damaged, please contact your
dealer.
No. Name Qty.
1 Wireless Earpiece 1
2 Earhook 1
3 Rubber Ear Cushion 3
4 Wireless Audio Adapter 1
5 Owner’s Manual 1

Function Overview
This exquisite, easy-wearing and low-
powered wireless earpiece is applicable to
Hytera portable radios with firmware version
of 5.05 and above.
With Hands-free function, you can have
convenient and safe communication within a
distance of 10 meters from the radio.
Yo u c a n u s e t h e w i r e l e s s e a r p i e c e t o
Product Overview
Wireless Earpiece
Wireless Audio Adapter
Specification by the Company to ensure the
optimal operation duration of the
Talk Time >4 hours radio.
D u s t/Wa t e r IP54 ●● Charging the wireless earpiece will
Protection not affect the radio operation.
Class ●● If the earpiece is idle for a long
time, charge it at least once within
Operation Wireless Earpiece: -20˚C to
three months.
Temperature ＋60˚C
●● If the LED indicator does not glow
Wireless Audio Adapter: red while the wireless earpiece is
-25˚C to +65˚C being charged, charge the earpiece
Storage Wireless Earpiece: -40˚C to f o r 10 t o 20 m i n u t e s f o r i t t o
Temperature ＋75˚C recover to normal status.
Wireless Audio Adapter: Charge the wireless earpiece before use.
-40˚C to +75˚C The LED indicator of the wireless earpiece
glows red during charging and glows blue
Charging the Wireless when the wireless earpiece is fully charged.
Earpiece Also, the LED indicator indicates the pairing
and connection status. Please refer to LED
Note：
Indication for details.
●● To charge the wireless earpiece,
simply connect it to the adapter on 1. Connect the wireless audio adapter to
the radio. It is recommended to use the radio and secure the screw to fasten
the high-capacity battery specified it.
2. F i x t h e w i r e l e s s e a r p i e c e i n t o t h e
wireless audio adapter.
Make sure the wireless earpiece is fully 3. Turn on the radio.
fixed into the adapter. Caution: The wireless earpiece can
be charged only when the radio is
powered on. Please ensure the radio is
powered on when charging the radio
(with battery attached) and the wireless
earpiece at the same time.
Pairing with and Connecting Wearing the Wireless
to the Adapter Earpiece
T i p s: T h e r e a r e t h r e e r u b b e r e a r
Before initial connection, the wireless cushions with different sizes provided
earpiece needs to be paired with the adapter with the wireless earpiece for your
first. Afterwards, the wireless earpiece can comfortable wearing.
connect to the adapter without pairing. We a r t h e w i r e l e s s e a r p i e c e a f t e r t h e
1. Disconnect the wireless earpiece from connection is completed. Adjust the rubber
other devices. ear cushion to position it into your ear
2. Connect the wireless earpiece with canal, and adjust the earhook to secure the
the radio. (See Charging the Wireless earpiece.
Earpiece for details)
3. Turn on the radio, and the wireless
earpiece will be powered up.
4. The wireless earpiece will be paired
with and connected to the adapter
automatically.
●● Pairing mode: The LED indicator of the
wireless earpiece/adapter flashes red
and blue alternatively.
●● Connection status: The LED indicator
flashes blue rapidly after the connection
is completed.
Transmitting The LED indicator flashes after the wireless
earpiece is powered on. Please refer to LED
After detaching the wireless earpiece from
Indication for indication details.
the adapter, you can hold down the PTT key
on the wireless earpiece or the PTT key on Powering Off
the adapter to make a call. To power off the adapter, turn off the radio.
Powering On/Off To power off the wireless earpiece, long
press the PTT key after the BT connection is
The wireless earpiece will give ring indication
disconnected (the LED indicator flashes blue
(you can hear it only when you are wearing
slowly). The LED indicator goes out when
the wireless earpiece) upon power-on/off.
the wireless earpiece is powered off.
Powering On LED Indication
●● Automatic power-on: When attached
Caution:
t o t h e r a d i o v i a t h e a d a p t e r, t h e ●● When the wireless earpiece is being
wireless earpiece will be powered on charged on the adapter, the LED
automatically when the radio is turned indicator glows red when charging
on. is in process and glows blue
●● Manual power-on: When the wireless when the wireless earpiece is fully
earpiece is not attached with the charged. In this case, the following
indications are not applicable.
adapter, you can power on the wireless
Yo u c a n i d e n t i f y t h e s t a t u s of
earpiece by long pressing the PTT key
the wireless earpiece via the LED
on it. The adapter can be powered on by
indication of the adapter. You can
turning on the radio only.
 also detach the wireless earpiece The LED indicator Paired but not
from the adapter to identify the
flashes blue slowly. connected
status of the wireless earpiece.
●● The following indications do not Troubleshooting
include the charging indications.
Phenomena Analysis Solution
LED Indication Earpiece Status The LED The battery Charge the
indicator power of wireless
The LED indicator Pairing does not the wireless earpiece
flashes red and blue glow red earpiece for 10 to 20
alternatively. while the may run out minutes.
wireless completely.
The LED Indicator Transmitting
earpiece
glows red. is being
The LED indicator Low battery power charged.
flashes red. (applicable to The wireless The wireless Move away
wireless earpiece earpiece earpiece or from other BT
cannot pair the adapter devices and
only)
with the may pair restart the
The LED indicator Connected with no adapter. with other BT radio to pair
flashes blue twice voice devices. the wireless
rapidly. earpiece with
the adapter.
The LED indicator Connected with
flashes blue once voice
rapidly.
FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.

This device complies with part 15 of FCC Rules. Operation is subject to the following two
conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may
cause undesired operation

Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

—Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.

This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.

IC statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject
to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause
undesired operation of the Device.
The device has been tested and compliance with SAR limits, users can obtain Canadian
information on RF exposure and compliance
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
Après examen de ce matériel aux conformité aux limites DAS et/ou aux limites d’intensité
de champ RF, les utilisateurs peuvent sur l’exposition aux radiofréquences et la
conformité and compliance d’acquérir les informations correspondantes

Under Industry Canada regulations, this radio transmitter may only operate using an

antenna of a type and maximum (or lesser) gain approved for the transmitter by

Industry Canada. To reduce potential radio interference to other users, the antenna

type and its gain should be so chosen that the equivalent isotropically radiated power

(e.i.r.p.) is not more than that necessary for successful communication.

Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut

fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé

pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de

brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type

d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.)

ne dépasse pas l'intensité nécessaire à l'établissement d'une communication

satisfaisante.