PSI280A.

qxp 19/02/2009 12:49 Page 1

A C C E S S C O N T R O L | C C T V | E A S | R F I D | F I R E P R O T E C T I O N | I N T R U D E R A L A R M S DATA SHEET

Pyronix TMD-15
Sequential
Confirmation Detector
2 Non-Overlapping Detectors in 1

Features:
15m Volumetric PIRs
1-15m Adjustable Microwave
Ability to operate as TMD (Two Movement Detectors) or
TriCover®
Interdigitated fields of view (Patent pending)
Unique Patented Anti Masking detection
Ability to detect masking of either PIR or Microwave
Anti Block technology (patent pending)
Selectable EOL (End of Line) Resistors
4 LED indications
Low power consumption
Remote LED Enable
Active Self Test
Low Voltage Fault Detect

The TMD 15® is a unique product boasting 2 non-overlapping The TMD 15® boasts an anti-masking feature, unlike other
detectors; a PIR and a dual technology in 1 robust housing. sequential confirmation detectors currently on the market. This
Based on Pyronix’ tried and tested patented technologies means that the TMD 15® is suitable for use in high risk
which has been proven over the last 20 years coupled with environments and for use in TS 50131-2-4 / EN 50131-1 /
innovative features, the TMD 15® is ideal for use on new PD 6662 Grade 3 systems.
systems or for retro fits upgrading to PD 6662 / EN 50131-1
Grade 3 & TS 50131-2-4.

The TMD 15® offers you outstanding detection performance

with optimum reliability designed to meet the latest industry
regulations.

The 2 detectors within the TMD 15® are non-overlapping and

have separate relay outputs. These outputs signal
independently to the control panel and consequently the ARC
(Alarm Receiving Centre) in the event of an activation. The TMD
15® enables a cost effective and efficient sequential
confirmation system.

A Tyco International Company

PSI280A.qxp 19/02/2009 12:49 Page 2

Pyronix TMD-15 Sequential Confirmation DATA SHEET

Detector
Technical Features Pir and Microwave
Electrical Volumetric
Operating Voltage 9-16V DC (12V nominal) 90o
Current Consumption - No Alarm State 30 Zone edges
24mA 3 planes
Current Consumption - Alarm State
28mA PIR
174mm
Relay Solid State Volumetric
Relay Output 50mA, 60V DC protected 69.3o
Tamper Switch 50mA, 12V max 24 Zone edges
RFI Immunity to Continuous Wave (CW) 80-2000MHz 3 Planes
75V/m
RFI Immunity to Amplitude / Pulse Modulation
(AM / PM) 80-2000MHz 25V/m
DTI approved frequencies 10.680, 10.687, 10.695GHz
FCC approved frequencies 10.515,10.525 10.535GHz
PTT approved frequencies 9.87, 9.90, 9.91 GHz 70mm 40mm

Operating Features
Alarm period of 2.5 secs
Detection Speed 0.2 - 3m/s
Operating Temperature -30°C to + 70°C
Storage Temperature -40°C to +80°C
Key
Optical
White Light Filter 2500 Lux PIR and PIR
Optics Sealed Microwave
Lens Fresnel Array ‘Grooves in’ infrared 15m Horizontal Coverage
Protection Ultraviolet Light Filter
15m
Mounting
Optimum Coverage Height 1.8-2.4m
12m

Ordering Information
TMD-15 Pyronix Grade 3 DualTec Sequential 10m
Confirmation Detector 15M
8m

6m

4m

2m
15m

For further information on how ADT can help you, contact your local office or phone free on 0800 010 999
or visit us at www.adt.co.uk

Head Office: ADT Fire and Security plc, Security House, The Summit, Hanworth Road, Sunbury-on-Thames, Middlesex TW16 5DB.
ADT and the ADT logo are registered trademarks of ADT Services AG and are used under license.
ADT reserves the right to modify or withdraw any product or service without notice.

Ref No PSI280A Issue 2 February 2009

© 2009 Tyco International