Catalog

Number

Notes
FEATURES & SPECIFICATIONS
INTENDED USE — Ideal one-for-one replacement of conventional lighting systems such as HID and
Type
fluorescent. For use in light Industrial applications such as, warehousing and other large indoor spaces
with mounting heights ranging from 10' – permitted. Certain airborne contaminants can diminish
integrity of acrylic and LED's. Click here for Acrylic Environmental Compatibility table for
suitable uses. LED High Bay
Certain airborne contaminants, including condensation, may adversely affect the
functioning of LEDs and other electronic components, depending on various factors such as

COMPACT PRO™
concentrations of the contaminants, ventilation, and temperature at the end-user location.
Click here for a list of substances that may not be suitable for interaction with LEDs and other
electronic components.
CONSTRUCTION — Extruded aluminum channels enable superior thermal performance. Glare Control
acrylic lens diffuses light source and reduces glare while protecting LEDs. Lens meets DLC 5.1 standards
for UGR (Unified Glare Rating).
9,000 through 60,000 Lumens
ELECTRICAL — 70% lumen maintenance at > 100,000 hours. Thermally protected driver standard
with 0-10V dimming. Luminaire surge protection level: designed to withstand up to 6kV/3kA per ANSI
C82.77-5-2015 Multi-volt driver, 120-277V standard.
INSTALLATION — Fixture is suitable for mounting by chain, cable, surface-mount bracket, pendant
monopoint, or hook monopoint. Utilizing appropriate mounting accessory. Designed for use in ambient
temperatures ranging from -40°C to 55°C when suspended 18" off ceiling. Surface mount to 45°C
ambient operation.
Note: Temperature cycling, or variations can potentially produce condensation; please consult factory.
LISTINGS — CSA listed. Damp location listed.
DesignLights Consortium® (DLC) Premium qualified product. Not all versions of this product may be DLC
Premium qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm
which versions are qualified.
GOVERNMENT PROCUREMENT — BAA – Product with the BAA option qualifies as a domestic end
product under the Buy American Act as implemented in the FAR and DFARS. Product with the BAA
option also qualifies as manufactured in the United States under DOT Buy America regulations.
BABA – Build America Buy America: Product with the BAA option also qualifies as produced in the
United States under the definitions of the Build America, Buy America Act.
Please refer to www.acuitybrands.com/buy-american for additional information.
WARRANTY — 5-year limited warranty. This is the only warranty provided and no other statements
in this specification sheet create any warranty of any kind. All other express and implied warranties
are disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/warranty/
terms-and-conditions
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
The product images shown are for illustration purposes only and may not be an exact representation
of the product.
Specifications subject to change without notice.

Stock Part
Standard Part Number Stock Part Number CI DLC DLC
Number Product ID Premium?
Code
CPHB 12000LM SEF GCL MD CPHB 12LM MVOLT 40K *268SAH PAMXQBT8 Yes
MVOLT GZ10 40K 80CRI DWH
CPHB 12000LM SEF GCL MD CPHB 12LM MVOLT 50K *2681J0 P0Q23DMQ Yes
MVOLT GZ10 50K 80CRI DWH
CPHB 15000LM SEF GCL MD CPHB 15LM MVOLT 40K *2681J2 PLPPHUFG Yes
MVOLT GZ10 40K 80CRI DWH
CPHB 15000LM SEF GCL MD CPHB 15LM MVOLT 50K *2681J5 PJ97Z0F9 Yes
MVOLT GZ10 50K 80CRI DWH
CPHB 18000LM SEF GCL MD CPHB 18LM MVO LT *268SAJ PWHG1EO1 Yes
MVOLT GZ10 40K 80CRI DWH 40K
CPHB 18000LM SEF GCL MD CPHB 18LM MVOLT 50K *2681J9 PSRNYSS1 Yes
MVOLT GZ10 50K 80CRI DWH
CPHB 24000LM SEF GCL MD CPHB 24LM MVOLT 40K *2681JE PC2IBASD Yes
MVOLT GZ10 40K 80CRI DWH
CPHB 24000LM SEF GCL MD CPHB 24LM MVOLT 50K *2681JL P7DUT85I Yes
MVOLT GZ10 50K 80CRI DWH
CPHB 30000LM SEF GCL MD Items marked by a shaded background qualify for the Design Select program and ship in 15
CPHB 30LM MVOLT 40K *2681JM PRXQVN2Q Yes
MVOLT GZ10 40K 80CRI DWH
days or less. To learn more about Design Select, visit www.acuitybrands.com/designselect.
CPHB 30000LM SEF GCL MD *See ordering tree for details
CPHB 30LM MVOLT 50K *2681JP PDAUAO8P Yes
MVOLT GZ10 50K 80CRI DWH

INDUSTRIAL CPHB
Page 1 of 14
CPHB LED High Bay DIGITAL NAVIGATION | Home | Ordering | nLight Platform | Controls | Performance Data

Design Select options indicated Looking for Contractor Select readily available
configurations? Click here to visit Contractor Select™
by this color background. spec sheet or go to www.contractorselect.com

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: CPHB 24000LM SEF GCL MD 120 GZ10 40K 80CRI CPSBW LSXR6 HL DWH

CPHB GCL GZ10

Performance Color Rendering
Series Lumens Lens Distribution Voltage Driver Color Temperature
Package Index
CPHB Compact Pro 9000LM 9,000 lumens SEF Standard GCL Glare MD Medium MVOLT 120-277V GZ10 0-10V 35K 3500 K 70CRI 70 CRI
High Bay 12000LM 12,000 lumens Efficiency Control Distribution 120 120V dimming 40K 4000 K 80CRI 80 CRI
HEF High Lens ND Narrow driver
15000LM 15,000 lumens 208 208V 50K 5000 K 90CRI 90 CRI
Efficiency Distribution
18000LM 18,000 lumens 240 240V
WD Wide
24000LM 24,000 lumens Distribution 277 277V
30000LM 30,000 lumens 347 347V ‡
36000LM 36,000 lumens 480 480V ‡
48000LM 48,000 lumens HVOLT 347-480V ‡
60000LM 60,000 lumens

DWH
Options Finish
BAA Buy America(n) Act and/or Build America Buy America Qualified Individual Controls (LSXR): ‡ DWH Gloss White
LSXR6 360°integral high mount motion sensor with standard on/off operation
Emergency Options: ‡
LSXR6 HL 360 °integral high mount motion sensor with high/low/(off) occupancy operation.
E10WCP 10W emergency battery pack, Certified in CA Title 20 MAEDBS ‡ For High/Low/(never off)
E15WMCP 15W emergency battery pack, Certified in CA Title 20 MAEDBS ‡ LSXR6 P 360 °integral high mount motion sensor with on/off switching photocell
IE10WMCP 10W emergency battery pack, Certified in CA Title 20 MAEDBS ‡ LSXR6 ADC 360 °integral high mount motion sensor with dimming & switching photocell
IE15WMCP 15W emergency battery pack, Certified in CA Title 20 MAEDBS ‡ LSXR6 ANL 360 °integral high mount motion sensor with High/Low occupancy dimming &
IE20WCPHE Iota 20W emergency battery pack, Certified in CA Title 20 auto-dimming photocell
MAEDBS ‡ *For 360° integral LOW MOUNT sensors, replace "6" in nomenclature with "10". For High Mount AISLEWAY
ETS Generator Transfer Device ‡ sensors, replace "6" in nomenclature with "50". Ex: LSXR50 HL
WGX Wireguard installed
Individual Controls with Bluetooth Programming (Haleon): ‡
IMP Integrated modular plug ‡
HLN45 OCC 360° integral high mount motion sensor; Bluetooth enabled LINK
SPD Additional 10kV surge protection device ‡
HLN45 HL 360° integral high mount motion sensor with High/Low (Off) occupancy detection;
RRL_ RELOC®-Ready luminaire. (Not available with Haleon sensor Bluetooth enabled
options). See page 13 for ordering information
HLN45 ADC 360° integral high mount motion sensor. High / Low / Off occupancy operation with
OCS RELOC® OnePass selectable cable 6' installed ‡ ‡ photocell; Bluetooth enabled
OCS4C RELOC® One Pass® selectable cable 6' installed. ‡ ‡ HLN45 ANL 360° integral high mount motion sensor with High/Low occupancy and auto dimming / off
247OP 24/7 operation, factory installed battery with 3-conductor functionality due to photocell; Bluetooth enabled
cordset or Reloc, with on/off controlled by sensor rather than
switch, the normal hot and unswitched hot wired together in nLight AIR Wireless Controls:
the fixture. Consult local codes to determine if this is allowable NLTAIR2 RLSXR6 nLight AIR (wireless) gen 2 control device with high mount occupancy and daylight sensor
JP Job Pack ‡ NLTAIR2 RPP20 D nLight AIR (wireless) gen 2 control device (dimming & switching power pack)
Cord Sets: ‡
*For 360° integral LOW MOUNT sensors, replace "6" in nomenclature with "10". For High Mount AISLEWAY
CPSBW 6' white damp location cord with straight blade plug sensors, replace "6" in nomenclature with "50". Ex: RLSXR50
(voltage will match fixture, 120V or 277V only)
CPTLW 6' white damp location cord with 15 amp twist-lock plug NLTAIR2 RMSOD45 Embedded nLight AIR (wireless) gen 2 control device with high mount occupancy and
(voltage will match fixture) ‡ daylight sensor LINK ‡
CPTL20AW 6' white damp location cord with 20 amp twist lock plug *For 360° integral Low Mount sensors, replace "45" in nomenclature with "7".
(voltage will match fixture) ‡
CNPW 6' white cord, no plug
CNP4CW 6' white cord , 4 conductors (for use with battery)
CNP5CDW 6' white cord, 5 conductors (includes dimming leads)

Accessories: Order as separate catalog number.

Mounting: Wire guards: Cord sets for IMP option: ‡
IBAC120 M100 Aircraft cable 10' with hook (one pair) WGCPHBSM Wire guard for CPHB (9000LM - 18000LM) CS1WIMP Straight plug, 120V
IBAC240 M75 Aircraft cable 20' with hook (one pair) WGCPHBMD Wire guard for CPHB (24000LM - 30000LM) CS3WIMP Twist-lock, 120V
IBHMP Hook monopoint WGCPHBLG Wire guard for CPHB (36000LM - 60000LM) CS7WIMP Straight plug, 277V
CPHBPMPSM Pendant Monopoint splice box with 3/4" hub (for 9000LM - 18000LM) CS11WIMP Twist-lock, 277V
CPHBPMPMD Pendant Monopoint splice box with 3/4" hub (for 24000LM - 30000LM) CS93WIMP 600V SO white cord, no plug
CPHBPMPLG Pendant Monopoint splice box with 3/4" hub (for 36000LM - 60000LM) (no voltage required)
ZACVH Aircraft 10' V hanger (one pair)
HC36 Hanger chain, 36" (one pair)
THUN J2 Tong hanger surface mount bracket ‡

CPHB
INDUSTRIAL: One Lithonia Way, Conyers, GA 30012 Phone: 1-800-705-SERV (7378) TechSupport-Lighting@AcuityBrands.com www.lithonia.com © 2020-2024 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/03/24
Page 2 of 14
CPHB LED High Bay DIGITAL NAVIGATION | Home | Ordering | nLight Platform | Controls | Performance Data

‡ Option Value Ordering Restrictions

Option Value Ordering Restrictions
18000LM Not available with HVOLT. When 18000LM requires 347 or 480 volt; the fixture utilizes a step-down transformer.
247OP Requires cord or reloc, battery and sensor options. Not available with 4 conductor cord sets or Individual controls with dimming options. CPHB will be wired from the factory for 24/7
operation (via cord or Reloc), with on/off controlled by sensor rather than switch. Consult local codes to determine if this is allowable.
347 Fixture includes an additional 10kV surge protector. When ordered with 18000LM, includes step down transformer.
480 Fixture includes an additional 10kV surge protector. When ordered with 18000LM, includes step down transformer.
Cord Sets Must specify voltage on cord sets with plugs.
Cord Sets for IMP Fixture must be ordered with IMP option. All cord sets are 18/3, 6' white.
CPHBPMPSM/MD/LG Pendant monopoint splice boxes will require wiring from access plate to splice box KO if power is being dropped through pendant conduit. Fixture does not have a KO in center to pull power
out of driver channel through splice box.
CPTL20AW Required on 347 and 480 volt.
Emergency Options May alter fixture construction. Consult line art for dimensions. Batteries not for use with pendant mount option. If cord set is needed, use CNP4CW which will have normal hot and
unswitched hot exiting cord set. Not available with IMP, ETS, or THUN options.
E10WCP MVOLT only. Max ambient operating temperature of 35°C. Includes an additional 10kV surge protector on the unswitched, battery hot.
E15WMCP MVOLT only. Factory installation only. Not approved for field installation. Max ambient operating temperature of 35°C. Includes an additional 10kV surge protector on the unswitched,
battery hot.
ETS MVOLT only. Not available with cord sets or batteries. When sensor is required, use "ER" sensor option. Utilizes ETS 924 DR component. Includes an additional 10kV surge protector
HVOLT Fixture includes an additional 10kV surge protector. Not valid with 18000LM. Not available with Haleon sensor options.
IE10WMCP Available with 347 or 480 only. Not available with 18000LM.
IE15WMCP Available with 347 or 480 only. Not available with 9000LM, 12000LM, 15000LM, or 18000LM.
IE20WCPHE MVOLT only. Not available for 9LM, 12LM, 15LM and 18LM. Not available with RPP20 and Cordset together. Not for use with THUN.
IMP Not available with battery options, NLTAIR2 RPP20 D options, LSXR ER options, ETS, or NLTAIR2 RLSXR ER options. Sensors will be fixture pre-wired to fixture. Not for use with THUN mounting
option.
Individual Controls (LSXR) Comes standard with SPD. This sensor configuration is suitable for minimum ambient temperature of 14°F (-10°C). Not available with other controls.
Individual Controls with Bluetooth Not available with HVOLT.
Programming (Haleon)
JP Consult table on page 7 for details.
NLTAIR2 RMSOD When HVOLT, 347, and 480 are ordered fixture utilizes fixture back pack. Not available with battery options when 347, 480 or HVOLT are ordered. Not available with ER when ordered with
9000LM, 12000LM, 15000LM or 18000LM lumen packages (ER option utilizes ETS).
OCS Must specify voltage. Dry Location listed only.
OCS4C Dry location listed only. Use when unswitched hot is required for battery pack options.
SPD 10kV surge protector standard with HVOLT, 347, 480, ETS, LSXR, RLSXR, RPP20, and battery options (on the unswitched, battery hot).
THUN J2 Order quantity required in multiples of two. 9000LM - 18000LM requires one per fixture, 24000LM - 60000LM requires two per fixture. Not for use with IMP or battery pack options.
CNP5CDW When ordered with a battery pack, 247OP is required.

‡ Design Select Ordering Restrictions

Option Value Ordering Restrictions
OCS, OCS4C (all lengths) Not on program when combined with 120V, 208V, 240V, or 347V
CPTLW Not on program when combined with 208V, 240V, or 347V

CORD SET ORDERING INFORMATION ‡ Cord sets cannot be ordered as accessories

Plug Option Plug type Amperage** Gauge # of conductors Color Location Length****
CNP Cord Only (blank) No Plug (blank) 15 amps (blank) 18 gauge (blank) 3 conductors (blk/ W White (blank) Damp (blank) 6 feet
CP Cord with Plug Option (for 20A 20 amps*** standard wht/grn) Location 3FT 3 feet
Cord Only 4C 4 conductors; Use
option) 10FT 10 feet
with Battery option
TL Locking when unswitched 12FT 12 feet
Type hot is needed 15FT 15 feet
SB Straight 5C 5 conductors; 20FT 20 feet
blade* Use when fixture
has 2 drivers and
separate operation
is required
5CD **** 5 conductors; Use
with dimming driver
when dimming
leads are desired
(Not for use with
dimming sensors)

* Straight blade on available with 120, 208, 240, and 277 volt.
** Amperage is only configurable for cords with plugs.
*** 20A required with 347 and 480 volt.
**** Not available with plugs.
***** Available in 1' increments from 1 to 30 feet.

CPHB
INDUSTRIAL: One Lithonia Way, Conyers, GA 30012 Phone: 1-800-705-SERV (7378) TechSupport-Lighting@AcuityBrands.com www.lithonia.com © 2020-2024 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/03/24
Page 3 of 14
CPHB LED High Bay DIGITAL NAVIGATION | Home | Ordering | nLight Platform | Controls | Performance Data

PHOTOMETRICS
See www.lithonia.com.

PERFORMANCE TABLE SCALING FACTOR TABLES

Glare Control Lens, Medium Distribution Glare Control Lens, Medium Distribution Multipliers
Lumen Lumen Lumen Lumen ND 1.037
CPHB SEF Wattage LPW CPHB HEF Wattage LPW
Package Output Package Output
WD 1.004
9000LM 61 9,123 150 9000LM 55 8,861 161
WGX 0.95
12000LM 87 12,273 141 12000LM 75 12,056 161
15000LM 102 15,343 150 15000LM 96 14,875 155
18000LM 133 18,199 137 18000LM 127 18,936 149
Delivered Delivered
Lumens 24000LM 174 24,873 143 Lumens 24000LM 150 23,740 158
4000K, 80CRI 4000K, 80CRI
30000LM 210 29,825 142 30000LM 196 29,644 152
36000LM 235 36,289 163 36000LM 210 35,409 169
48000LM 324 48,342 153 48000LM 292 47,480 163
60000LM 421 58,946 140 60000LM 378 59,274 157

9000LM 61 9,183 150 9000LM 55 9,002 164

12000LM 88 12,354 140 12000LM 75 12,248 163
15000LM 105 15,444 147 15000LM 96 15,111 157
18000LM 133 18,319 138 18000LM 127 19,236 151
Delivered Delivered
Lumens 24000LM 174 25,037 144 Lumens 24000LM 150 24,117 161
5000K, 80CRI 5000K, 80CRI
30000LM 210 30,081 143 30000LM 196 30,115 154
36000LM 235 36,529 155 36000LM 210 35,971 171
48000LM 324 48,661 150 48000LM 292 48,234 165
60000LM 421 59,452 141 60000LM 378 60,215 159
*Values shown are at 120V.

CPHB CHARACTERISTICS
Wattage
Length Width Depth Weight
Lumen Standard Efficiency (SEF) High Efficiency (HEF) Comparable light source
package
Shown in
120V 277V 347V 480V 120V 277V 347V 480V Dimensions shown in inches (centimeters) pounds (kg)
9000LM 61 60 60 60 55 54 54 54 14.4 (36.6) 11.5 (29.2) 2.3 (5.8) 5 (2.2) 100W MH, 4-lamp T8 NBF
12000LM 88 88 88 87 75 74 74 74 14.4 (36.6) 11.5 (29.2) 2.3 (5.8) 5 (2.2) 175W MH, 4-lamp T8 HBF, 2-lamp T5HO
15000LM 105 104 104 103 96 95 95 94 14.4 (36.6) 11.5 (29.2) 2.3 (5.8) 5 (2.2) 200W MH, 6-lamp T8 NBF
18000LM 133 132 144 144 127 126 138 138 14.4 (36.6) 11.5 (29.2) 2.3 (5.8) 6.5 (2.9) 250W MH, 6-lamp T8 HBF, 4-lamp T5HO
24000LM 174 174 173 173 150 149 149 149 22.8 (57.9) 11.5 (29.2) 2.3 (5.8) 8 (3.6) 400W MH, 6-lamp T5HO
30000LM 210 209 208 208 196 194 194 194 22.8 (57.9) 11.5 (29.2) 2.3 (5.8) 8 (3.6) 575W MH, 10-lamp T8 HBF
36000LM 235 235 234 234 210 208 208 208 44 (111.8) 11.5 (29.2) 2.3 (5.8) 14 (6.35) 750W MH, 8-lamp T5HO
48000LM 324 322 320 320 289 287 286 285 44 (111.8) 11.5 (29.2) 2.3 (5.8) 14 (6.35) 875W MH, 10-lamp T5HO
60000LM 421 421 419 419 374 372 371 370 44 (111.8) 11.5 (29.2) 2.3 (5.8) 14 (6.35) 1000W MH
*Dimensions & weights shown for standard product configurations without optional components

PROJECTED LUMEN MAINTENANCE

Operating hours 10,000 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000
Lumen maintenance factor 0.98 0.96 0.93 0.91 0.89 0.87 0.85 0.83 0.81 0.79

CPHB
INDUSTRIAL: One Lithonia Way, Conyers, GA 30012 Phone: 1-800-705-SERV (7378) TechSupport-Lighting@AcuityBrands.com www.lithonia.com © 2020-2024 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/03/24
Page 4 of 14
CPHB LED High Bay DIGITAL NAVIGATION | Home | Ordering | nLight Platform | Controls | Performance Data

BATTERY INFORMATION
EMERGENCY BATTERY PACK OPTIONS
Field installable
Nomenclature Part Number Utilizes BPK option
(remote mount only)
E10WCP (MVOLT only) PS1055CP Yes Yes
E15WMCP (MVOLT only) PS1555MCP Yes No
IE10WMCP (HVOLT only) ILBHI CP10 HE SD LCSTICK Yes No
IE15WMCP (HVOLT only) ILBHI CP15 HE SD LCSTICK Yes No
IE20WCPHE (MVOLT only) ILBLP CP20 HE SD No Yes

EMERGENCY LUMENS GCL, MD (5000K, 80CRI) EMERGENCY LUMENS GCL, MD (5000K, 80CRI)
Lumen Package E10WCP E15WMCP Lumen Package E10WCP E15WMCP
9000 1784 2738 9000 1916 2911
12000 1778 2729 12000 1914 2909
15000 1734 2701 15000 1919 2914
18000 1796 2744 18000 1916 2898
SEF 24000 1847 2845 HEF 24000 1966 2984
30000 1884 2868 30000 1945 2952
36000 1890 2915 36000 2058 3125
48000 1888 2912 48000 2057 3124
60000 1872 2853 60000 2065 3137

Emergency Batteries & Cord Sets - WIRING

When battery is ordered with a 3-conductor cord set and 24/7 operation When battery is ordered with a 4-conductor cord set…
Ideal for use with battery + SENSOR to control fixture on/off based on occupancy.
Order option 247OP to receive wired for this scenario. When 247OP is ordered Blk (Hot)
driver black (Hot) and battery red (Hot) will be wired together inside driver channel. Cord set
Wht (Neutral)
Blk (Hot)
Blk (Unswitched Cord set Grn (Ground)
Wht (Neutral)
Hot, labeled) Red (Unswitched Hot)
Grn (Ground)

Emergency Batteries & Cord Set Notes

When a battery is ordered with a 3 conductor cord set, 247OP option is required.
• The 3 conductor cord set will include the hot (BLK), neutral (WHT), and
ground (GRN) conductors. 24/7 operation means the design intent is for the
fixture to always receive power and never be switched off. This ensures the
battery is always being charged. When 247OP is ordered with a 3/c cord set,
the red battery hot will be wired to the normal hot inside the driver channel,
and the new hot wire lead will exit the fixture with the ground and neutral
wires. Consult local codes to determine if this is allowable.
When a battery is ordered with a 4 conductor cord set…
• The unswitched hot will be included in the cord set as a separate
conductor (RED).

CPHB
INDUSTRIAL: One Lithonia Way, Conyers, GA 30012 Phone: 1-800-705-SERV (7378) TechSupport-Lighting@AcuityBrands.com www.lithonia.com © 2020-2024 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/03/24
Page 5 of 14
CPHB LED High Bay 8 7 6 5
DIGITAL NAVIGATION | Home | Ordering | nLight Platform | Controls | Performance Data
4

11.52
8.67

2.42
8 8C 7 7 6 6 5 5 4 43 23

End View: CPHB 9000LM - 60000LM

D
D 14.44
14.44
13.10
13.10

C
Side View: 9000LM, 12000LM, 15000LM, 18000LM

22.84
21.50 22.84
21.50
A
B

8 7 6 Side View: 24000LM,

5 30000LM
4

44.04
A 42.70 UNLESS OTHERWISE SPECIFIED: NAME DATE

DIMENSIONS ARE IN INCHES DRAWN

TOLERANCES:
FRACTIONAL CHECKED TIT
ANGULAR: MACH BEND
ENG APPR.
TWO PLACE DECIMAL
THREE PLACE DECIMAL MFG APPR.

INTERPRET GEOMETRIC Q.A.

PROPRIETARY AND CONFIDENTIAL TOLERANCING PER:
COMMENTS:

A
THE INFORMATION CONTAINED IN THIS MATERIAL
DRAWING IS THE SOLE PROPERTY OF SI
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
<INSERT COMPANY NAME HERE> IS
NEXT ASSY USED ON
FINISH
D
802-00024
PROHIBITED. APPLICATION DO NOT SCALE DRAWING SC

8 7 6 5 4 3 2
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
<INSERT COMPANY NAME HERE>. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF NEXT ASS

Side View: 36000LM, 48000LM, 60000LM

<INSERT COMPANY NAME HERE> IS
PROHIBITED.

8 7 6 5 4 3

44.04

20.35

CPHB 36-60L WITH E10WCP/E15WMCP

44.04

17.72

16.75

CPHB 36-60L WITH IE20WCPHE

CPHB
INDUSTRIAL: One Lithonia Way, Conyers, GA 30012 Phone: 1-800-705-SERV (7378) TechSupport-Lighting@AcuityBrands.com www.lithonia.com © 2020-2024 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/03/24
Page 6 of 14
CPHB LED High Bay DIGITAL NAVIGATION | Home | Ordering | nLight Platform | Controls | Performance Data

14.44
13.68

1.82
.84
5.08

CPHB 9000LM - 18000LM WITH E10WCP/E15WMCP 11.52

CPHB 9000LM - 60000LM with E10WCP/E15WMCP

22.84
20.33

CPHB 24000LM - 30000LM WITH E10WCP/E15WMCP

22.84
17.92
16.75 44.04

42.70 2.38

5.67 .84 1.50

11.52
CPHB 24000LM - 30000LM WITH IE20WCPHE

44.04

20.35

CPHB 36000LM - 60000LM WITH E10WCP/E15WMCP

44.04
17.72
16.75

CPHB 36000LM - 60000LM WITH IE20WCPHE

CPHB
INDUSTRIAL: One Lithonia Way, Conyers, GA 30012 Phone: 1-800-705-SERV (7378) TechSupport-Lighting@AcuityBrands.com www.lithonia.com © 2020-2024 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/03/24
Page 7 of 14
CPHB LED High Bay DIGITAL NAVIGATION | Home | Ordering | nLight Platform | Controls | Performance Data

JOB PACK DETAILS

*Representative of Job Pack design for 14” standard units.

Series Performance Lumens Standard Fixture Cord Set or RELOC® JP Wireguard JP Sensor JP
9000LM
12000LM
144 144 144 90*
15000LM
18000LM
CPHB SEF/HEF 24000LM
96 96 96 60*
30000LM
36000LM
48000LM 45* 30* 30* 30*
60000LM

*Traditional Job Pack

Breakout Example:
Ordered Line: Qty: 200 CPHB 24000LM SEF GCL MD MVOLT GZ10 40K 80CRI CNPW DWH JP
*Above configuration shows 96 units for Job Pack
Breakout Line 1: Qty: 192 CPHB 24000LM SEF GCL MD MVOLT GZ10 40K 80CRI CNPW DWH JP96
*Will have 2 pallets of 96 units each in job packs
Breakout Line 2: Qty: 8 CPHB 24000LM SEF GCL MD MVOLT GZ10 40K 80CRI CNPW DWH
*Balance will ship in unit cartons
Note: If quantity ordered is less than Job Pack quantity for that configuration, the breakout line will default to unit packs.

CPHB
INDUSTRIAL: One Lithonia Way, Conyers, GA 30012 Phone: 1-800-705-SERV (7378) TechSupport-Lighting@AcuityBrands.com www.lithonia.com © 2020-2024 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/03/24
Page 8 of 14
CPHB LED High Bay DIGITAL NAVIGATION | Home | Ordering | nLight Platform | Controls | Performance Data

STANDARD SENSOR
Standard Sensor or Control Device EM Solution ER Solution
(commonly used with Battery Pack Option) (Used when switching single incoming hot to generator power) (Used when switching to generator power via a 2nd hot lead)
Emergency Lighting *Luminaire-integral battery pack and emergency driver *Diesel genset emergency backup supply *Fast Transfer (FT) inverter emergency backup supply
Strategy *Generator transfer device *Slow transfer inverter (>30ms) emergency backup supply *Uninterruptible Power System (UPS) emergency
*UL 924 listed
*EM devices will remain at their high-end trim and ignore wireless
lighting control commands, such as in the event of a normal power
failure, unless a normal-power-sensed (NPS) broadcast is received at
Emergency least every 8 seconds. *UL 924 listed
Operation *Not specifically listed for emergency use.
Recommended * Using the CLAIRITY+ mobile app, EM devices must be associated *Utilizes dedicated Normal Power sensing leads to initiate lighting
Scenarios *Wired such that a separately listed emergency device provides
Control Device with a group that includes a normal power sensing device to receive control override during loss of normal power scenarios.
emergency lighting power and/or control during loss of normal
Option NPS broadcasts. *Requires connections to both emergency and normal power
power scenarios. *Only non-emergency rPP20, rLSXR, rSBOR, rSDGR, and nLight AIR circuits.
luminaires with version 3.4 or later firmware can provide normal
power sensing for EM devices. See specification sheets for control
devices and luminaires for more information on options that support
normal power sensing.

ER Solution CPHB Standard Sensor Settings

EM Solution
Standard Sensor or (Generator / Inverter
Function Sequence of Operations (Generator / Inverter
Control Device on separate emergency Vacancy Time Dim to Off Photocell
powered with 1 hot) High Trim Low Trim
circuit - 2 hots) Out Time Delay Set Point
Lights turn on when motion detected; Upon vacancy,
On/Off LSXR6 - LSXR6 ER 10 min - - - -
Lights turn off after timeout.
Lights turn on to high trim when presence is detected;
Upon vacancy, the lights dim to low trim after timeout and 10% (Driver
High/Low (Off) turn off after “Dim To Off" Time Delay. For High/Low (Never LSXR6 HL - LSXR6 HL ER 10 min 2.5 min 100% -
Low)"
Off) function, bypass the relay by bringing power directly
into driver rather than wiring hot through LSXR device.

Lights turn on unless ambient light level is above set point;

Photocell If ambient light levels in the space exceed the photocell set LSXR6 P - LSXR6 P ER - - - - 4 fc
point, lights will turn off even during occupancy.
Standalone
Sensors Lights turn on when presence is detected unless ambient
(Individual light level is above set point; Upon vacancy, the lights
control per Dimming dim to low trim , then turn off after timeout; During
fixture) LSXR6 ADC - LSXR6 ADC ER 10 min 2.5 - - 4 fc
+ Photocell occupancy, automatically raise and lower electric light
level to maintain set point and turn off, depending on
ambient light.
Lights turn on when presence is detected unless ambient
light level is above set point; Upon vacancy, lights dim
Dimming + to low trim after timeout and remain at low trim until
Photocell presence is detected; Automatically raise and lower LSXR6 ANL - LSXR6 ANL ER 10 min - 100% 10% 4 fc
+ High/Low electric light level to maintain set point during occupancy
and during vacancy keeps lights at low trim if ambient
light is not sufficient.
Note: For 360° integral Low Mount sensors, replace "6" in nomenclature with "10". Ex. LSXR10 P. For High Aisle Mount sensors, replace "6" with "50".

Lights turn on when motion detected; Upon vacancy, Lights

On/Off HLN45 OCC - - 10 min - - - -
turn off after timeout.
Lights turn on to high trim when presence is detected; Upon
High/Low (Off) vacancy, the lights dim to low trim after timeout and turn HLN45 HL - - 10 min 2.5 min 100% 10% -
off after “Dim To Off" Time Delay.
Bluetooth Lights turn on when presence is detected unless ambient
Sensors light level is above set point; Upon vacancy, the lights dim to
Dimming +
(Configurable low trim during timeout; During occupancy, automatically HLN45 ADC - - 10 min 2.5 min - 10% 50 fc
Photocell
via mobile raise and lower electric light level to maintain set point and
Bluetooth app) turn off, depending on ambient light.
Lights turn on when presence is detected unless ambient
light level is above set point; Upon vacancy, lights dim to
Dimming +
Photocell + High/ low trim after timeout and remain at low trim until presence Never off due
HLN45 ANL - - 10 min 100% 10% 50 fc
Low (Never Off) istodetected; Automatically raise and lower electric light level to occupancy
maintain set point during occupancy and during vacancy
keeps lights at low trim if ambient light is not sufficient.

Dimming Wirelessly programmable network sensor - On/Off

+ Photocell control with dimming, occupancy detection, and daylight NLTAIR2 RMSOD45 RLSXR 6 EM NLTAIR2 RMSOD45 ER 7.5 min - 100% 30% 50 fc
+ Occupancy harvesting (Sensor embedded in fixture)
nLight AIR
Wireless Wirelessly programmable On/Off control with dimming - 10%
Dimming NLTAIR2 RIO RPP20D EM NLTAIR2 RIO ER - - 100% -
Sensors no sensor (Device embedded in fixture) (driver low)
Note: For 360° integral Low Mount sensors, replace "45" in nomenclature with "7".
EM sensors/controls are KO-mounted; all others integral. RPP20 D EM de-rates fixture to Damp Location.

*All ER solutions include standard sensor or control device with a factory-installed Iota ETS##-DR (UL924 bypass device). This device is integral to the fixture and will include a hot and neutral lead for the dedicated emergency
circuit. MVOLT , 120-277 only. ER solutions are not available with the IMP option.

CPHB
INDUSTRIAL: One Lithonia Way, Conyers, GA 30012 Phone: 1-800-705-SERV (7378) TechSupport-Lighting@AcuityBrands.com www.lithonia.com © 2020-2024 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/03/24
Page 9 of 14
CPHB LED High Bay DIGITAL NAVIGATION | Home | Ordering | nLight Platform | Controls | Performance Data

LSXR – Fixture Mount Occupancy Sensor (see www. LSXR configuration

Comparable Old style sensor
AcuityControls.com for additional information) CMRB sensor nomenclature
• Three interchangeable lens options to satisfy multiple mounting For shortest lead times use one of the following LSXR configurations
heights and coverage pattern requirements.
LSXR50 / LC0ZU CMRB 50 MSI
• Integrated mounting bracket drops lens down 3" from chase nipple.
LSXR50 HL / LCH0SZU CMRB 50 D MSID
• Single or dual relay versions — designed with robust protection
from the harsh switching requirements of T5 and LED loads. LSXR50 P / LCPZU CMRB 50 P MSIPED
• Photocell and 0-10VDC dimming options. LSXR6 / LA0ZU CMRB 6 MSI360
• No PIR field calibration or sensitivity adjustments required. LSXR6 HL / LAH0SZU CMRB 6 D MSI360D
• Sensor ambient temperature rating of 14°F (-10°C) to 131°F (55°C).
LSXR6 P / LAPZU CMRB 6 P MSI360PED

LSXR COVERAGE PATTERNS 0m 0 ft

HIGH MOUNT 360º LENS (#6)

• Best choice for 15 to 45 ft (4.57 to 13.72 m) mounting 4.6 15

heights
• 15 to 20 ft (4.57 to 6.10 m) radial coverage overlaps area
lit by a typical high bay fixture LOW VIEW HIGH VIEW
9.1 30
• Excellent detection of large motion (e.g. walking) up 0 ft 0m

to a 35 ft (10.76 m) mounting height

• Excellent detection of extra large motion (e.g. forklifts)
15 4.6 13.7 45
up to a 45 ft (13.72 m) mounting height
6 3 0m 3 6 9.1 6 3 0m 3 6 9.1
20 10 0 ft 10 20 30 20 10 0 ft 10 20 30

HIGH MOUNT AISLEWAY LENS (#50)

• Provides a bi-directional coverage pattern ideal for SIDE VIEW TOP VIEW
0 ft 0 m
warehouse racking
10 3
• 1.2x mounting height equals approximate detection
range in either direction 20 6 7 2.1

• Typical 40 ft (12.19 m) mounting detects 50 ft (15.24 30 9.1 0 ft 0 m

m) in either direction 40 12.2 7 2.1
• Superior aisleway coverage compared to a masked 15.2 7.6 0m 7.6 15.2 15.2 7.6 0m 7.6 15.2
50 25 0 ft 25 50 50 25 0 ft 25 50
360º lens

LOW MOUNT 360º LENS (#10)

• Best choice for large motion detection (e.g. walking) 8.5 28
• 360º conical shaped pattern
SIDE VIEW TOP VIEW 4.3 14
• Provides ~24 ft (7.32 m) radial coverage (~2000 ft2) when 0 ft 0m
mounted at 9 ft (2.74 m)
0m 0 ft
• 7 to 15 ft (2.13 to 4.57 m) mounting heights provide 16 to
36 ft (4.88 to 10.97 m) radial coverage 9 2.7
4.3 14
• Detection range improves when walking across beams 8.5 6.4 4.3 2.1 0m 2.1 4.3 6.4 8.5
compared to into beams 8.5 28
28 21 14 7 0 ft 7 14 21 28

CPHB
INDUSTRIAL: One Lithonia Way, Conyers, GA 30012 Phone: 1-800-705-SERV (7378) TechSupport-Lighting@AcuityBrands.com www.lithonia.com © 2020-2024 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/03/24
Page 10 of 14
CPHB LED High Bay DIGITAL NAVIGATION | Home | Ordering | nLight Platform | Controls | Performance Data

HALEON - Integrated Occupancy Sensor with Bluetooth® Programmability

• Programmable sensor settings over Bluetooth® with Acuity VLP smartphone app.
• Default programming options to service various application spaces - occupancy detection, 0-10V dimming and daylight harvesting.
• 360° High Mount and High Mount Aiselway lens detection options for mounting heights up to 40 ft.
• Integrated retractable lens mask included to block unwanted detection.
• Sensor ambient temperature rating of -40°F (-40°C) to 158°F (70°C).

Haleon Default Programming

Photocell Dim to Off Time
Model Default Operation LSXR Equivalent Occupancy Time Delay Photocell Mode Low Trim High Trim
Set-point Delay

HLNxxx On/Off Occupancy Only LSXR6 LT or LAO0STU 10 minutes Disabled n/a n/a 100% Disabled

Occupancy w/ 0-10V Dimming

HLNxxx HL LSXR6 HL LT or LAH0STU 10 minutes Disabled n/a 10% 100% 2.5 minutes
(High/Low/Off)

Occupancy w/ Dim & Switch

HLNxxx ADC* LSXR6 ADC LT or LAM0STU 10 minutes On/Off & Auto Dim 50 fc 10% 100% 2.5 min
Photocell

Dim & Switch Photocell with Stay Dim/ Never off

HLNxxx ANL LSXR6 ANL LT or LAG0STU 10 minutes On/Off & Auto Dim 50 fc 10% 100%
High/Low Occupancy Operation due to occupancy

Note: Lens detection noted in place of 'xxx'

*HLN ADC includes a 2.5 minute dim to off not found in LSXR ADC.

HIGH MOUNT

HALEON COVERAGE PATTERNS

45- HIGH MOUNT 360° SIDE VIEW TOP VIEW
40 12

• Optimized full coverage pattern for 10 – 50 ft. (3.1 – 12 m)

0 ft 0m
• Reliable detection of large motion (e.g. pedestrian walking traffic) up to 30 ft. (9.1 m)
mounting height 10 3.0 20 6.1

• Reliable detection of extra-large motion (e.g. forklift traffic) up to 40 ft. (12 m) mounting 20 6.1

height 30 9.1
0 ft 0m

• Stow-able rotating lens shield can be utilized to mask areas in which detection is not desired
40 12

12 6.1 0m 6.1 12
20 6.1
40 20 0 ft 20 40

40 12

45A HIGH MOUNT AISLEWAY

• Optimized bi directional coverage pattern for aisleways with 10 – 50 ft. (3.1 – 12 m)
mounting heights
• 1.2X’s mounting height equals approximate detection range
• Reliable detection of large motion (e.g. pedestrian walking traffic) up to 30 ft. (9.1 m)
mounting height
• Reliable detection of extra-large motion (e.g. forklift traffic) up to 40 ft. (12 m) mounting
height
• Stow-able rotating lens shield can be utilized to mask areas in which detection is not desired

CPHB
INDUSTRIAL: One Lithonia Way, Conyers, GA 30012 Phone: 1-800-705-SERV (7378) TechSupport-Lighting@AcuityBrands.com www.lithonia.com © 2020-2024 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/03/24
Page 11 of 14
CPHB LED High Bay DIGITAL NAVIGATION | Home | Ordering | nLight Platform | Controls | Performance Data

nLIGHT AIR CONTROLS - rLSXR

rLSXR COVERAGE PATTERNS 0m 0 ft

HIGH MOUNT 360º LENS (#6)

• Best choice for 15 to 45 ft (4.57 to 13.72 m) mounting 4.6 15

heights
• 15 to 20 ft (4.57 to 6.10 m) radial coverage overlaps area
lit by a typical high bay fixture LOW VIEW HIGH VIEW
9.1 30
• Excellent detection of large motion (e.g. walking) up to a 0 ft 0m
35 ft (10.76 m) mounting height
• Excellent detection of extra large motion (e.g. forklifts)
up to a 45 ft (13.72 m) mounting height 15 4.6 13.7 45

6 3 0m 3 6 9.1 6 3 0m 3 6 9.1
20 10 0 ft 10 20 30 20 10 0 ft 10 20 30

HIGH MOUNT AISLEWAY LENS (#50)

• Provides a bi-directional coverage pattern ideal for SIDE VIEW TOP VIEW
0 ft 0 m
warehouse racking
10 3
• 1.2x mounting height equals approximate detection
range in either direction 20 6 7 2.1

• Typical 40 ft (12.19 m) mounting detects 50 ft (15.24 m) 30 9.1 0 ft 0 m

in either direction
40 12.2 7 2.1
• Superior aisleway coverage compared to a masked 15.2 7.6 0m 7.6 15.2 15.2 7.6 0m 7.6 15.2
360º lens 50 25 0 ft 25 50 50 25 0 ft 25 50

LOW MOUNT 360º LENS (#10)

• Best choice for large motion detection (e.g. walking) 8.5 28

• 360º conical shaped pattern

SIDE VIEW TOP VIEW 4.3 14
• Provides ~24 ft (7.32 m) radial coverage (~2000 ft2) when 0 ft 0m
mounted at 9 ft (2.74 m)
0m 0 ft
• 7 to 15 ft (2.13 to 4.57 m) mounting heights provide 16 to
36 ft (4.88 to 10.97 m) radial coverage
9 2.7
4.3 14
• Detection range improves when walking across beams 8.5 6.4 4.3 2.1 0m 2.1 4.3 6.4 8.5
compared to into beams
28 21 14 7 0 ft 7 14 21 28 8.5 28

CPHB
INDUSTRIAL: One Lithonia Way, Conyers, GA 30012 Phone: 1-800-705-SERV (7378) TechSupport-Lighting@AcuityBrands.com www.lithonia.com © 2020-2024 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/03/24
Page 12 of 14
CPHB LED High Bay DIGITAL NAVIGATION | Home | Ordering | nLight Platform | Controls | Performance Data

RMSOD
• 100% digital PIR detection
• Combined daylight and occupancy sensor
• Fully dimmable via digital or analog dimming protocols,
providing the right amount of light for the application and to
optimize energy savings
• Optional UL 924 emergency functionality via EM option,
which eliminates wiring for sensing normal power

COVERAGE PATTERN
COVERAGE PATTERNS
COVERAGE PATTERNS
Lens rotates Lens
15 degrotates 15 adjustment.
to enable deg to enable adjustment.
Initial detection willInitial
occurdetection willwalking
earlier when occur earlier
Lens
fieldrotates
COVERAGE
when
across sensor's of view15than
walking deg tosensor's
enable
PATTERNS
across
when adjustment.
walkingfield of view
directly Initialwhen
than
at sensor. detection willdirectly
walking occur earlier
at sensorr.
when walking across sensor's field of view than when walking directly at sensorr. SIDE VIEW TOP VIEW
Lens rotates 15 deg to enable adjustment. Initial detection will occur earlier
when walking across sensor's field of view than when walking directly at sensorr.
7 - MINI7 LOW-BAY 360º360º
- MINI LOW-BAY
4.5
4.5
3.8
15
15
12.5
7 - MINI LOW-BAY 360º 3.8 12.5
• Recommended for walking motion detection from mounting heights 3 10

between•
3 10
Recommended
and 20for walking
m) motion detection from
2.5
4.5 7
15
78-ftMINI
(2.44 m) ft (6.10
• Recommended for walking motion detection from
LOW-BAY 360º 0 ft 0m 2.5
1.5
3.8 7
5
12.5
mounting
• Initial detection heights
of walking between
motion 8 ft (2.44
along sensor axism) and 20 ft of
at distances (6.10
2x m) 0 ft 0m 1.5
0.75 5
2.5
mounting
• Recommended
Initial heights
detection between 8 ft (2.44
offt walking motion m) and 20 ft (6.10 m) 3 10

• 1.75xalong
up tosensor axism).
at 0.75
0 m 2.5
0
7 ft
• Initial
the mounting height up to 15for
detection walking
(4.57
of walking motion
m)and
motion detection
20ftfrom
(6.10 2.5
heightalong
up tosensor axis atm) 0 m 0 ft
distances of 2x the mounting 15 ft (4.57 0 ft 0m 0.75
1.5 2.5
5
• Provides 12 mounting
ft (3.66 m)ofheights
distances radial
2x the between
detection
mountingof 8small
ft (2.44
height m)toand
motion
up 1520
when ft (6.10
ftmounted
(4.57 m)m) 15 4.6 0.75
1.5
0.75 2.5
5
2.5
• and
at 9 ft (2.74 m) 1.75x
Initial up to of
detection 20ft (6.10 m).
walking motion along sensor axis at 15 4.6 1.5
2.5 5
7 ft
• and 1.75x12upft to 20ft (6.10 m). 0 m 0
Provides (3.66 m) radial detection of small motion 9.2 7.4 5.4 3.6 1.8 0m 1.8 3.6 5.4 7.4 9.2 2.5
3 7
10
distances
• Provides of 2x the mounting height up to 15 ft (4.57 m) 0.75 2.5
when mounted at 9 ft (2.74 m)detection of small motion
12 ft (3.66 m) radial 9.2 7.4 5.4 3.6 1.8 0m 1.8 3.6 5.4 7.4 9.2 3
3.8 10
12.5
15 4.6 30 24 18 12 6 0 ft 6 12 18 24 30 1.5 5
and
when1.75x up toat20ft
mounted 9 ft(6.10
(2.74m).
m) 30 24 18 12 6 0 ft 6 12 18 24 30 3.8
4.5
2.5 12.5
15
7
• Provides 12 ft (3.66 m) radial detection of small motion 9.2 7.4 5.4 3.6 1.8 0m 1.8 3.6 5.4 7.4 9.2 4.5
3 15
10
when mounted at 9 ft (2.74 m) 30 24 18 12 6 0 ft 6 12 18 24 30 3.8 12.5
4.5 15

30 - UNIVERSAL 360º
30 - UNIVERSAL 360º
0m 0 ft 6.1 20
•30 Provides
30 - UNIVERSAL 360º detection
excellent of large motion (e.g. walking) 0m 0 ft 6.1 20
• Provides
- UNIVERSAL
excellent360º
detection of large motion (e.g. walking)
when mounted between 15 to 40 ft (4.57 to 12.19 m)
• • when
Provides excellent
15 to 20 mounted(4.57between
detection
ftexcellenttodetection
6.10 m) 15radial
of large motion to(e.g.
40 coverage
ftwalking)
(4.57 tooverlaps
12.19 m)area
when 3m
0 10ft
0 3
6.1 10
20
•
mounted•betweenProvides
15 to 20
15 ftto(4.57 to 6.10
40 ft (4.57 m)
to 12.19 ofm)
large
radial motionoverlaps
coverage (e.g. walking)
area 3 10 3 10
lit
when by a typical
mounted high bay
between fixture
15 to 40 ft (4.57 to by
12.19 m)
• lit
15 to 20 •ft (4.57 by
to a
Recommended typical
6.10 m) high
radial
for bay fixture
coverage
fixtures
overlaps
that have
area
a 1:1
lit a typical
spacing to
high bay• 15
•fixture to 20 ft (4.57for
Recommended to fixtures
6.10 m)that radial coverage
have overlapstoarea
a 1:1 spacing
6.1
3 20
10 0 m 10
3 0 ft
mounting
lit by height
afixtures
typical highratio
bayor less (e.g.
fixture fixtures 30’ on center or 6.1 20 0 m 0 ft
• Recommended mounting
less for height
that
@ a 30’ mounting ratio
have or
a less
1:1
height).) (e.g.
spacing fixtures
to 30’
mounting on center or
• or
height ratio Recommended
lessless@(e.g. for30’
a 30’fixtures
mounting fixtures thatorhave
onheight).)
center less a@1:1 spacing
a 30’ to
mounting 9.1
6.1 30
20 3m 0
0 10ft
height).) mounting height ratio or less (e.g. fixtures 30’ on center or
9.1 30 3 10
less @ a 30’ mounting height).)
12.2 30
9.1 40 6.1
3 20
10
6.1 0m 6.1 12.2 40 6.1 20
6.1 0m 6.1
20 0 ft 20
20 0 ft 20 12.2 40 6.1 20
6.1 0m 6.1
45 - HIGH MOUNT 360º 20 0 ft 20
45 - HIGH MOUNT 360º 40 12

40 12

• -Optimized full coverage

360º pattern for 10 – 40 ft. (3.1 – 12 m)
45 - HIGH MOUNT 360º
45 HIGH MOUNT
• Optimized full coverage pattern for 10 – 40 ft. (3.1 – 12 m)
0 ft 0m

• Reliable detection of large motion (e.g. pedestrian walking

40 12
0 ft 0m

Optimized•fullReliable
20 6.1

• coveragedetection
pattern for of 10
large
– 40motion
ft. (3.1(e.g.
– 12pedestrian
m) walking 10 3.0

• traffic)
20 6.1

Optimizedup tofull
30coverage
ft. (9.1 m)pattern
mounting height
for 10 – 40 ft. (3.1 – 12 m) 10 3.0

• traffic)
Reliable detection of up to
large 30 ft.
motion (9.1 m)
(e.g. mounting
pedestrian height
walking traffic) up 0 ft 0m

• m)Reliable
Reliable detection
detection of of extra-large motion (e.g. forkliftwalking
traffic)
20 6.1

• Reliable heightof large

detection
motion (e.g. pedestrian
extra-large motion (e.g. forklift traffic)
20 6.1
to 30 ft. (9.1 mounting 20 6.1
0 ft 0m

up to 40 ft.to(12 m) mounting height height

10 3.0

traffic) up 30 ft. (9.1 m) mounting

30 9.1 0 ft 0m

• up toof40extra-large
Reliable detection ft. (12 m) motion
mounting(e.g.height
forklift traffic) up to 40 ft. 30 9.1

• Reliable
heightdetection of extra-large motion (e.g. forklift traffic)
20 6.1

(12 m) mounting 40 12
0 ft 0m

up to 40 ft. (12 m) mounting height

40 12 20 6.1
6.1 0m 6.1 12 30 9.1 12
20 6.1
40 20
6.1 ft
0m 20
6.1 40
12 12

40 20 0 ft 20 40
40 12

20 6.1
6.1 0m 6.1 12 12
40 12
40 20 0 ft 20 40
40 12

40 12

45A - HIGH MOUNT AISELWAY

45A - HIGH MOUNT AISELWAY
• Optimized bi directional coverage pattern for aisleways with
•45AOptimized
10- –HIGH bi directional
40 ft.MOUNT
(3.1 – 12AISELWAYcoverageheights
m) mounting pattern for aisleways with
10 – 40 ft. (3.1 – 12 m) mounting heights
• 1.5x’s
Optimizedmounting height equals
bi directional approximate
coverage pattern fordetection
aislewaysrange
with
•
• 1.5x’s
Reliable mounting height
10 – 40 ft.detection
(3.1 – 12ofm)
equals
large approximate
motion
mounting
detection
(e.g. pedestrian
heights
range
walking
• Reliable detection of large motion (e.g. pedestrian walking
• traffic)
1.5x’s up to 30 ft.height
traffic) mounting
(9.1 m)
up to 30 ft. (9.1 m)
mounting
equals height detection range
approximate
mounting height
• Reliable detection of large extra-large
motionmotion (e.g. forkliftwalking
(e.g. pedestrian traffic)
• upReliable
to 40 detection
ft. (12 m) of extra-large
mounting motion (e.g. forklift traffic)
height
traffic) up to 30 ft. (9.1 m) mounting height
up to 40 ft. (12 m) mounting height
• Reliable detection of extra-large motion (e.g. forklift traffic) CPHB
up to 40 ft. (12 m) mounting height
INDUSTRIAL: One Lithonia Way, Conyers, GA 30012 Phone: 1-800-705-SERV (7378) TechSupport-Lighting@AcuityBrands.com www.lithonia.com © 2020-2024 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/03/24
Page 13 of 14
CPHB LED High Bay DIGITAL NAVIGATION | Home | Ordering | nLight Platform | Controls | Performance Data

IMP - Integrated Modular Plug

• The integrated modular plug (IMP) option allows the installer to plug and play a multitude of accessories.
• Cord sets connect quickly to any fixture with IMP option.
• IMP accessories include occupancy sensors, photocells, X-point relays.

IMP compatible cord sets1

CS1WIMP Straight plug, 120V
CS3WIMP Twist-lock, 120V
CS7WIMP Straight plug, 277V
CS11WIMP Twist-lock, 277V
CS25WIMP Twist-lock, 347V Ordering Example
Order As: Qty 1 - IBG 12000LM SEF AFL GND 120 GZ10 40K 80CRI IMP CP5BW DWH
CS93WIMP 600V SEOOW white cord, no plug
Ships As: Qty 1 - IBG 12000LM SEF AFL GND MVOLT GZ10 40K 80CRI DWH
CS97WIMP Twist-lock, 480V Qty 1 - CS1WIMP
Notes
1 Cord set required for fixture operation. All cord sets are 18/3, 6’ white.

RRL - RELOC®-Ready Luminaire

• RRL connectors to be used with the OnePass system.
• Load side of connector factory installed to luminaire.
• 4-pole mating connector with push-in terminations allows for simple installation.
• Touch-safe design on both halves meets UL/CSA requirement.
• Wiping contact design allows safe disconnect under load.

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: RRLA

Series Wiring instructions

RRL RELOC®-ready luminaire A Hot conductor wired to position #1 (phase A); non-dimming
B Hot conductor wired to position #2 (phase B); non-dimming
AE Hot conductor wired to position #1 (phase A), hot conductor #2 wired to position #2 (phase B); non-dimming 1
C12S Hot conductor in position #1 (phase A), low voltage conductor #1 in position #2,low voltage conductor #2 in position #3; dimming 2

Compatible RELOC® Cables for Industrial Luminaires (ordered and shipped separately) Notes
(click to view RELOC product page for more information) 1 AE commercial fixtures should disconnect the TSPL before unplugging the RRL
so it does not go into discharge mode. Requires fixture to have battery option.
2 C12S option is used with the OnePass for 0-10V/DALI applications. Not for use
with dimming sensors.

OCS OCU OD

CPHB
INDUSTRIAL: One Lithonia Way, Conyers, GA 30012 Phone: 1-800-705-SERV (7378) TechSupport-Lighting@AcuityBrands.com www.lithonia.com © 2020-2024 Acuity Brands Lighting, Inc. All rights reserved. Rev. 10/03/24
Page 14 of 14