Industrial Endoscope

DS360

User Manual
 EN

Product Features
• DEPSTECH is a booming technology company, specialized in creating various
endoscopes and committed to make you feel more secure.
• DS360 is a high-performance industrial endoscope, equipped with 4.3” IPS LCD
Screen display, has the camera and video functions and saves into TF memory card
(Micro-SD card). Such camera uses high-performance CMOS chip that supports the
record-high frame rate to get clear images with Bluart 3.0 technology, widely used in
industrial maintenance, appliance maintenance, mechanical maintenance and design
and other fields.

Special Warning and Notice

• This product is a camera of industrial endoscope, not applicable to medical or physical
examination!
• In order to lengthen the battery life, it is recommended that you should charge the
device once every 3 months whether it is used.
• Do not try to replace internal battery by yourself, because unprofessional operation may
lead to risks of personal injury due to battery overheating, etc.

Safety and Protection

• Probe of camera is an electronic device of high precision, so please do not hit the probe
of camera or pull the cables, which may lead to failure of the device.
• With IP67 waterproof layer, the probe shall be used with extra care and protected from
scratches!
• Camera probe is made from materials that are not high temperature resistant, so make
sure the internal temperature of any internal combustion engine or other equipment
whose internal temperature is higher has been cooled when they are examined,
otherwise the device will be directly damaged!
• In case of device damaged, please do not dismantle it by yourself, but contact the seller
or the supplier for more professional maintenance services.
• Children may not use this device independently without the guidance of adults.

Operating and Storage Environments

• The device should be operated at an ambient temperature of 32~113℉ (0~45℃).
• The device should be stored in a dry, clean, oil-free and waterless place without any
chemical liquid.

- 01 -
 Product Introduction

3 4 5 6 7

2
1

1 • Hold this button for 2s to power on/off the endoscope.

2 • Single press to take a photo.

• Hold this button to start video record, and single press to end the video record.

3 • Click to enter the setting menu.

4 • Click to dim the LED lights of the camera.

• Move the cursor up(In the menu).

5 • Hold this button for 2s to enter the album.

• Click to confirm choices(In the menu).

6 • Click to brighten the LED lights of the camera.

• Move the cursor down(In the menu).

7 • Click to rotate the real-time image 180°.

• Return function(After entering the album/Settings menu, press this key to return
to the previous level of operation interface).
• Hold this button for 2s to switch main/side camera(Only applicable to dual-lens
products).

- 02 -
 8 Type-C Charging Port
• For charging (Type-C cable connected to the adapter).
• For data transmission (Type-C cable connected to PC client).

9 Charging Status LED indicator

8 • Red LED indicator flash: Charging status.

9 • Red LED indicator stay on: Charging finished.

10
11 10 Reset Button
• Short click the reset button with the reset pin,
the device will be shut down.

11 TF Card Slot
• Support up to 32G TF card.
• Please format it for the first time of usage.

UI Introduction
Preview
Photo Shoot/Video Record Screen Rotation 180°

Battery Power

TF Card Status

Main Lens

Side Lens(B)

Side Lens(C)

Timestamp
Tips:
Dual Lens: A:Main Lens B:Side Lens
Triple Lens: A:Main Lens B:Side Lens(B) C:Side Lens(C)

- 03 -
Album
File name File number

Photography date

Current playback duration / Total video duration

Language Setting
Default language of the device is English; If other language is required,
please follow the steps below:
1. Click the button to enter menu interface, select Language by
pressing the / arrow button and then press the button, enter
the language setting interface.
2. Click / button to select the language you need, and then press
button to switch the language.

Photo/Video
1. Take photos by pressing button.
2. Long press to start a video recording, single press to
the end video recording.

- 04 -
View Photo/Video
1. Long press in preview mode to enter the photo album.

2. Press / to view photos, Click to play videos.

3. Press to exit the photo album.

Delete Photo/Video
1. When viewing photos/videos, press to enter the photo/video detail
page.

2. Press / to choose to delete the current file or all files.

1920*1080

- 05 -
Lens Switching
(Only available for dual and triple lens products)
When the product is turned on the default open the main lens, long press
the button 2s can switch the lens.

TF Card Formatting
1. On the preview interface, press the button to enter the menu;

2. Press / to select “Format” options;

3. Press to enter the option interface, Select “OK”;

4. Wait for the formatting to complete.

OK Cancel

- 06 -
 Copy Photo And Video Files To Computer
1. Use a TF card reader to copy data directly.

Card Reader

TF
Card

2. Use a Type-C cable to connect to computer for copying Setting path.

1. Please connect the product to your computer
2. Press the button to enter the menu.
3. Select “Data transmission”.
4. Press the button to start copying to computer.

If the device is not connected with computer, click "Data transmission" on the
setup interface, then USB icon shows up on the display; Please press the
button to exit.
It is normal for "NO SIGNAL" to appear on the screen when you press the
button to exit data transmission.

Charging Instructions
1. Connect the device to the DC 5V adapter for charging;
2. The red indicator light flashes when the device is charging, and is always
on when fully charged.

Guide For Accessories Installation

Installation method:
Turn counterclockwise-remove Turn clockwise-tighten
protect cap accessories

- 07 -
 Specifications

Model Single Lens Dual Lens

Screen Spec 4.3” IPS LCD Screen

Camera Diameter 7 mm (0.27 in) 8 mm (0.31 in)

3-10 cm
Focal Range
(1.18-3.93 in)

Photo Resolution 1920*1080

Video Spec 720 p / 15-30 fps

Camera View 76°

Battery Life 3-4 H

Charging Time 3-4 H

Charging Voltage and Current DC 5V/2A

Packing List

Endoscope User Manual Type-C Charging Cable Accessories

- 08 -
 FCC Requirement: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

CE compliance: This device complies with EN 60065 standard, which means this
device will not do harm to the user or products as following situations: 1)Electric shock
2)High temperature 3)Radiation 4)Explosion from inner 5)Mechanical Harm 6)Fire
Hazard 7)Chemical burns.

EU Conformity Statement: This product and - if applicable - the supplied accessories

too are marked with "CE" and comply therefore with the applicable harmonized
European standards listed under the EMC Directive 2014/30/EC, the RoHS Directive
2011/65/EU and Amendment (EU) 2015/863.

WEEE Notice: 2012/19/EU (WEEE directive): Products marked with this symbol
cannot be disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of equivalent
new equipment, or dispose of it at designated collection points. For more information
see: www.recyclethis.info

2013/56/EU (battery directive): This product contains a battery that cannot be

disposed of as unsorted municipal waste in the European Union. See the product
documentation for specific battery information. The battery is marked with this symbol,
which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For
proper recycling, return the battery to your supplier or to a designated collection point.
For more information see: www.recyclethis.info

EC REP 1: Like Sun GmbH.Planckstr.59, 45147 Essen, Germany

EC REP 2: DST Co., Ltd. Fifth Floor 3 Gower Street, London, WC1E 6HA, UK
 Customer Services
Please contact us if you have any questions,
we love to hear from you

www.depstech.com

support@depstech.com

Facebook Official Page: @DEPSTECH. FANS

Shenzhen Deepsea Innovation Technology Co., Ltd.

Room 1901-1902, Jinqizhigu Building, No.1 Tangling Road, Nanshan District, 518055, Shenzhen, CN

Made in China V01.23.08