PROGRAM GOALS AND OBJECTIVES

Course Tittle : (DRIVING) NC II

Nominal Duration : 118

1. Provide contextualized delivery of knowledge requirements for

the basic, common and core unit of competency.
2. Provides the learners with knowledge, desirable attitudes and
profitable skills required to perform the competencies in
accordance with the industry standards.
3. Provides the learners with the simulated experiences based on
the requirements stipulated on the Competency-Based
Curriculum.
4. Achieve 95% level of mastery of the learners through
competency based training.
5. Produce graduates with 92% certification rate.
6. Enhance program structure and curriculum of the qualification
based on the analysis of conducted program evaluation.
7. Conduct at least twice every two years.

Instructions:
These learner’s Record Book (LRB) is intended to serve as record of
all accomplishment/task/activity while undergoing training in the
industry. It will eventually become evidence that can be submitted
for portfolio assessment and for whatever purposes it will serve you.
It is therefore important that this contents are viably entered by
both trainees and instructor. The learner’s Record Book contains all
the required competencies in your chosen qualification. All you have
to do is to fill the column “task required” and “date accomplished”
with all the activities in accordance with the training program and to
be taken up in the school and with the guidance of instructor. The
instructor will likewise indicate his/her remarks on the “Instructor
Remarks “ column regarding the outcome of the task accomplished
by the trainee’s . Be sure that the trainee will personally accomplish
the task and confirmed by the instructor. It is of great importance
that the consent should be written legibly on ink. Avoid any
corrections or erasures and maintain cleanliness of this record. This
will be collected by your trainer and submit the same to the
Vocational Instruction Supervisor (VIS) and shall form part of the
permanent trainee’s document on file.

THANK YOU.

1|Page
 BASIC
COMPENTENCIE
S

2|Page
 PRE-TEST

Qualification: DRIVING NC II
Multiple choice: DIRECTION: Choose the correct answer and write the letter in your answer sheet.
1. The current validity of driver’s license is?
a. 2yrs b. 3yrs
c. 5yrs d. none of the above
2. What statement is correct for the pedestrian safety?
a. Never mind b. Full acceleration
c. Stop d. slow down
3. Plate number describe as yellow background and black mark?
a. Private b. Diplomat
c. For hire d. None of the above
4. Overtaking is illegal when?
A Done at the right-side b. done at the left side
c. at the back d. none of these
5. The system of the vehicle use to guide the direction left, and right?
a. Brake system b. eco-system
c. steering system d. auto-lighting system
6.Smoke from the exhaust of the vehicle is called?
a. methane b. cardon dioxide
c. carbon monoxide d. all of these
7. What pedal is absent when it is an automatic transmission?
a. brake pedal b. clutch pedal
c. accelerator pedal d. foot pedal
8. During night travel and there is an approaching vehicle, what must a professional driver’s do?
a. Use horn to warn approaching vehicle
b. turn headlight to low
c. turn headlight to high
d. none of these
9. What is the meaning of the green light in the traffic light?
a. go b. stop
c. caution d. pull over
10.The system that controls the engine from overheating?
a. eco-system b. cooling system
c. brake system d. lighting system
11 What is the registration month for the vehicle with plate number ending 6?
a. January b. March
c. June d. August
12. What must be the attitude of a professional driver in a curve?
a. speed up the vehicle b. stop
c. full acceleration d. slow down
13. A kind of a regulatory signs that contains a cellphone drawn at the middle?

3|Page
 a. no littering b. no smoking
c. no use d. turn-off cellphone
14. What is the middle pedal of the in a manual vehicle?
a. brake pedal b. clutch pedal
c. accelerator pedal d. foot pedal
15. Which of this is consider as priority vehicle?
a. jeep b. ambulance
c. Tricycle b. motorbike
16. Land Transportation and Traffic Code is called?
a. RA 8850 b. RA 7794
c. RA 4136 d. RA 9003
17. One of the following is required during the application of a student permit?
a. School card b. Mayor’s permit
c. Live Birth d. PSA
18. Vehicle describe as white background with red mark?
a. Private b. diplomat
c. government vehicle d. for hire

19. What is the age requirements for an applicant for a professional driver’s license?
a. 21yrs b. 18yrs
c. 16yrs d. none of this
20.What is the meaning of a double yellow lane?
a. overtaking is allowed b. no overtaking
c. can overtake anytime d. all of these
21. An Act requiring all public and private vehicle to have Seat Belt is called?
a. RA 8550 b. RA 7794
c. RA 8750 d. None of these
22. Which of the following license required to drive public utility vehicle or commercial vehicle?
a. Non-professional driver’s license b. Student driver
c. Professional driver’s license d. International license
23. What is the agency of the government that approved the granting of a commemorative plate?
a. Office of the President b. MMDA
c. LTO d. Traffic Management Group
24.In a multi-lane highway, which lane is for the slow-moving vehicle?
a. Far left b. Far right
c. Middle lane d. Shoulder
25. What is the meaning of a broken white line?
a. Avoid overtaking
b. overtaking is allowed when no vehicle on the other lane
c. vehicle must stop when someone is crossing
d. limit speed to 65 kph
26.What will you do when an emergency vehicle is approaching you?
a. Follow the vehicle b. Speed up your vehicle
c. Give way to clear the road d. Stop at the middle of the road
27.What vehicle signal you should turn on in case of an emergency situation?
a. Taillight b. hazard light
c. signal light d. headlight
28. What will you do if the tire of your car burst at crossing speed?
a. Maintain your speed b. pull over immediately

4|Page
 c. Slow down and prepare to stop d. Depressed the brake pedal immediately
29. What is the meaning of the solid line in front before the intersection?
a. go ahead b. full stop
c. give way sign d. caution
30. Why seat belt is necessary?
a. to support the driver in an even road condition
b. to deploy during head on collision
c. to reduce injuries and fatalities during collision
d. To protect the driver from possible injuries in motor vehicle collision
31. Which of the following tips helps avoid fatigue in driving?
a. Keep your vehicle comfortably cool and ventilated
b. Use sunglasses on bright day
c. Start your trip in well rested condition
d. all of the above
32. Which of the following vehicle components controls the speed of the vehicle until it stops?
a. Steering b. brake
c. Transmission d. brake
33.When battery signal lights on, it means?
a. low fluid level b. low oil level
c. Defective charging system d. defective headlight
34. When temperature level reach 3/4 mark, it indicates?
a. low coolant level b. overheating
c. no water on reservoir d. normal temperature
35. When starting a vehicle with automatic transmission, what is the best practice?
a. depressed brake pedal while transmission is in “P” position
b. depressed brake pedal while transmission is in “R” position
c. depressed brake pedal while transmission is in “N” position
d. depressed brake pedal while transmission is in “D” position

5|Page
Qualification Title : DRIVING NC II

Unit of Competency : Participate in Workplace Communication

Learning Trask/Activity Date Supervisor’s

Outcome Required accomplished remarks

Obtain and Specific and

convey relevant
workplace information is
information accessed

Team meetings
Perform duties are attended
following
workplace Workplace
Instructions interactions are
conducted

Complete Reporting
relevant work requirements to
related supervisor are
document completed

Trainee’s Signature over printed name Trainer’s Signature over printed

name

6|Page
Qualification Title : DRIVING NC II

Unit of Competency : Work in Team Environment

Learning Trask/Activity Date Supervisor’s

Outcome Required accomplished remarks

Role and objective

of the team is
identified
Described team
role and scope
Responsibilities
are identified

Individual role and

responsibilities are
Identify own identifies
role and
responsibility
within team Roles of other
team are
recognized

Team activities
and objectives are
participated
Work as a
team member
Protocols in
reporting are
observed

7|Page
 Trainee’s Signature over printed name Trainer’s Signature over printed
name

Qualification Title : DRIVING NC II

Unit of Competency : SOLVE/ADDRESS GENERAL WORPLACE

PROBLEMS

Learning Trask/Activity Date Supervisor’s

Outcome Required accomplished remarks

Problems to be
investigated are
defined and
Identify determined
Routine
problem Current conditions
of the problem are
identified and
documented

Potentials
solutions to
Look for problem are
solutions to identified
routine Recommendations
problems about possible
solution are
developed

Implementation of
solutions are
planned
Recommend
solution to
Evaluation of
problems
implemented
solutions are
planned

8|Page
 Trainee’s Signature over printed name Trainer’s Signature over printed
name

Qualification Title : DRIVING NC II

Unit of Competency : DEVELOP CAREER AND LIFE DECISIONS

Learning Trask/Activity Date Supervisor’s

Outcome Required accomplished remarks

Self-management
strategies are
identified
Techniques for
Manage one’s effectively
emotion handling negative
emotions and
unpleasant
situation in the
workplace are
examined
Personal strengths
and achievements,
based on self-
Develop assessment
reflective
Progress when
practice
seeking and
responding to
feedback from
teachers

Efforts for
continuous self-
Boost self- improvements are
demonstrated
confidence and
develop self- Counter-
regulation productive
tendencies at work
are eliminated

9|Page
 Trainee’s Signature over printed name Trainer’s Signature over printed
name

Qualification Title : DRIVING NC II

Unit of Competency : CONTRIBUTE TO WORKPLACE INNOVATION

Learning Trask/Activity Date Supervisor’s

Outcome Required accomplished remarks

Opportunities for
improvement are
identified
Identify proactively in own
opportunities to area of work
do things better
Information are
gathered and
reviewed

People who could

provide input to
ideas for
improvements are
Discuss and identified
develop ideas
Ways of
with others
approaching
people to begin
sharing ideas are
selected
Summarizing
analyzing and
generalizing skills
Integrated ideas are used
for change in
Reporting skills
the workplace
are likewise used
to communicate
results

10 | P a g e
 Trainee’s Signature over printed name Trainer’s Signature over printed
name

Qualification Title : DRIVING NC II

Unit of Competency : PRESENT RELEVANT INFORMATION

Learning Trask/Activity Date Supervisor’s

Outcome Required accomplished remarks

Evidence, facts
and information
are collected
Gather
data/information Evaluation,
reference and
conditions are
reviewed

Validity of data/
information is
assessed
Assess gathered
data/
information Analysis
techniques are
applied to assess
data/ information

Studied data/
information are
Record and recorded
present
information Findings are
presented to
stakeholders

11 | P a g e
 Trainee’s Signature over printed name Trainer’s Signature over printed
name

Qualification Title : DRIVING NC II

Unit of Competency: PRACTICE OCCUPATIONAL SAFETY AND HEALTH

POLICIES AND PROCEDURES

Learning Trask/Activity Date Supervisor’s

Outcome Required accomplished remarks

Relevant OSH
requirements,
regulations,
policies and
Identify OSH procedures are
compliance identified
requirements OSH activity non-
conformities are
conveyed to
appropriate
personnel
OSH work activity
material, tools and
equipment
requirements are
Prepare OSH identified
requirements for
compliance Required OSH
materials, tools
and equipment are
acquired

Perform tasks in
accordance with Relevant ODH
work procedures
relevant OSH are identified
policies and

12 | P a g e
 Work Activities are
procedures execued

Trainee’s Signature over printed name Trainer’s Signature over printed

name

Qualification Title : DRIVING NC II

Unit of Competency: EXERCISE EFFICIENT AND EFFECTIVE SUSTAINABLE

PRACTICES IN THE WORKPLACE

Learning Trask/Activity Date Supervisor’s

Outcome Required accomplished remarks

Required resource
utilization in the
workplace is
Identify the
measured
efficiency and of
resource
Data are recorded
utilization
in accordance with
workplace protocol

Potential causes of
inefficiency and/or
Determined ineffectiveness are
causes of listed
inefficiency
and/or
Causes of
ineffectiveness
inefficiency and/or
are listed
ineffectiveness are
identified

Convey Efficiency and

inefficient and effectiveness of
resource
ineffective utilization are
environmental reported

13 | P a g e
 Concerns related
resource
practices utilization are
discussed

Trainee’s Signature over printed name Trainer’s Signature over printed

name

Qualification Title : DRIVING NC II

Unit of Competency: PRACTICE ENTREPRENEURIAL SKILLS IN THE

WORKPLACE

Learning Trask/Activity Date Supervisor’s

Outcome Required accomplished remarks

Good practices
relating to
workplace
Apply operations are
entrepreneurial observed
workplace best
practice Quality procedures
and practices are
complied
Observed good
practices relating
to workplace
Communicate operations are
entrepreneurial communicated
workplace best
Observed quality
practices
procedures and
practices are
communicated

14 | P a g e
 Preservation and
optimized of
workplace
resources is
Implement cost- implemented
effective Judicious use of
operations workplace tools,
equipment and
materials are
observed

Trainee’s Signature over printed name Trainer’s Signature over printed

name

COMMON
COMPENTENCIE
S
15 | P a g e
 INSTITUTIONAL ASSESSMENT TOOLS

(Written Assessment)

Sector: Automotive and Land Transport

Qualification: DRIVING NC II

NAME:

SCORE:

Multiple Choices: Choose the correct. Write the letter of the correct space
provided before the number.

1. The present validity of driver’s license is?

a. 3yrs b. 8yrs
c. 5 to 10yrs d. 6yrs

16 | P a g e
 2. The amount of gasoline in the vehicle can be determined
through.

a. sight gauge b. temperature gauge

b. odometer d. fuel gauge

3. What statement is correct for pedestrian safety?

a. don’t’ mind them b. slow down

c. stop d. full acceleration

4. The plate number described as yellow background with black

mark.
a. private b. for hire
c. government vehicle d. none of these

5. Overtaking is illegal when it is done in?

a. at the back b. done at the right side

c. done at the left side d. all of these

6. The system of the vehicle that guides the vehicle from left, or
right?

a. steering system b. cooling system

c. brake system d. none of these

7. Smoke from the exhaust of the vehicle is called?

a. carbon dioxide b. carbon monoxide

c. carbon d. lead

8. In the automatic transmission, what pedal is missing?

a. brake pedal b. clutch pedal

b. accelerator pedal d. no pedal at all

9. During night travel and there is an approaching vehicle, what

must a professional driver’s do?

a. use horn to warn the vehicle b. turn headlight to low

c. turn headlight to high d. none of these

10. Green light in the traffic lights indicates?

a. caution b. stop
c. pulls over d. go

17 | P a g e
 11. The system responsible for keeping the running temperature of
the vehicle.

a. lighting system b. cooling system

c. eco-system d. brake system

12. The registration month for the car with plate number ending 6?

a. January b. march
c. June d. may

13. Regulatory signs with a cellphone drawn inside is?

a. no littering b. no smoking
c. no use d. turn-off cellphone

14. What is the middle pedal in the manual transmission?

a. brake pedal b. accelerator pedal

c. clutch pedal d. no pedal

15. Which of this is considered as priority vehicle?

a. jeep b. bus
c. ambulance d. tricycle

16. Land Transportation and Traffic Code is calle?

a. RA 8550 b. RA 9002
c. RA 4136 d. RA 7794

17. Which of the following is required during the application of a

student permit?

a. school card b. mayor’s permit

c. live birth d. PSA

18. A vehicle described as white background with red mark.

a. Private b. government vehicle

c. diplomat d. for hire

19. What is the meaning of a double yellow lane?

a. overtaking is allowed b. no overtaking

18 | P a g e
 c. can overtake anytime d. all of these

20. Which of the following license is required to drive the public

utility vehicle or commercial vehicle?

a. non-professional license b. PDL

c. student permit d. none of these

21. What is meaning of broken white line along the road?

a. avoid overtaking
b. overtaking is allowed when no vehicle on the other lane
c. Vehicle must stop when someone is crossing
d. limit speed

22. What signal you should turn in an emergency situation?

a. signal light b. taillight

c. headlight d. hazard light

23. In a multi-lane highway, which lane is for the slow-moving

vehicle?

a. far left b. far right

c. middle lane d. none of these

24. What is the meaning of a solid line before the intersection?

a. give way sign b. caution

c. full stop d. go ahead

25. Why seat belt is necessary?

a. to support the driver in an even road condition

b. to deploy during head on collision
c. to reduce injuries and fatalities during head on collision?
d. to protect the driver from possible injuries in motor vehicle
collision

26. What will you do when an emergency vehicle is approaching

you?
a. speed up your vehicle b. follow the vehicle
c. hydraulic system d. solar system
27. What is the agency of the government approved the granting
of the commemorative plate?

19 | P a g e
 a. steering b. LTO
c. Office of the President d. HPG

28. Which of the following components control the speed until it

stop?

a. steering b. brake system

c. hydraulic system d. solar system

29. When the temperature of the vehicle reached ¾ mark this

means?

a. normal temperature b. running temperature

c. overheating d. none of these

30. What will you do when the tire of your car burst at crossing
speed?

a. maintain your speed

b. speed up your vehicle
c. slow down and prepare to stop
d. pull over immediately

Qualification Title : DRIVING NC II

Unit of Competency: Apply appropriate sealant/adhesive

Learning Trask/Activity Date Supervisor’s

Outcome Required accomplished remarks

Sealant/adhesive
selected in line
with job
Identify requirements
appropriate
sealant/adhesive Sealant/adhesive
checking is
performed

Prepared Surface materials

surface for are identified as
sealant/adhesive per construction

20 | P a g e
 Surface is cleaned
and free of
moisture, dust and
other foreign
matters

Sealant/adhesive
Apply is applied evenly
sealant/adhesive Excess
evenly sealant/adhesive
is removed

Sealant/adhesive
Store/dispose of are stored
sealant/adhesive Waste are
disposed

Trainee’s Signature over printed name Trainer’s Signature over printed

name

Qualification Title : DRIVING NC II

Unit of Competency: Perform mensuration and calculation

Learning Trask/Activity Date Supervisor’s

Outcome Required accomplished remarks

Object or
component to be
measured is
Select identified
measuring
Correct
instruments
specification are
obtained from
relevant source

21 | P a g e
 Measuring tools
are selected in line
with job
Carry out requirements
measurements
and calculation
Accurate
measurements are
obtained to job

Maintain Measuring
instruments must
measuring
kept free from
instruments corrosion

Measuring
instruments
cleaned before
and after using

Trainee’s Signature over printed name Trainer’s Signature over printed

name

Qualification Title : DRIVING NC II

Unit of Competency: Read, interpret and apply specification and

manuals

Learning Trask/Activity Date Supervisor’s

Outcome Required accomplished remarks

Identify and Appropriate

access manuals/ manual are
specification identified and
accessed

22 | P a g e
 Version and date
of manual is
checked
Relevant sections,
chapters of
specifications are
Interpret located
manuals Information and
procedure in the
manual are
interpreted
Manual is
interpreted
according to job
Apply requirements
information in
manual Manual is
interpreted
according to job
requirements
Ready access and
updating of
Store manuals information
Manual or
specification are
stored

Trainee’s Signature over printed name Trainer’s Signature over printed

name

Qualification Title : DRIVING NC II

Unit of Competency: Use and apply lubricants/ coolant

Learning Trask/Activity Date Supervisor’s

Outcome Required accomplished remarks

Identify types of Correct

lubricants/coola information on
nt lubricants

23 | P a g e
 schedule is
accessed
Type and quantity
of
lubricants/coolant
is identified
Correct procedure
for change of
lubricants is
Use and apply
identified
lubricants/coola
nt Correct tools and
equipment are
selected

Tools, equipment
and materials are
Perform properly stored
housekeeping
activities Workplace is free
from waste
materials

Trainee’s Signature over printed name Trainer’s Signature over printed

name

Qualification Title : DRIVING NC II

Unit of Competency: Perform shop maintenance

Learning Trask/Activity Date Supervisor’s

Outcome Required accomplished remarks

24 | P a g e
 Cleaning solvent
used as per
workshop/tools
Inspect /clean
cleaning
tools and work
requirement
area
Work are is
checked and
cleaned
Tools/equipment
are checked and
Store/arrange store
tools and shop
equipment Corresponding
labels are posted
and visible

Dispose Containers for

waste/used used lubricants
lubricants are visibly labeled

Wastes/used
lubricants are
disposed as per
workshop SOP
Complete
inventory of tools
Report damaged equipment is
tools/ equipment maintained
Reports prepared
has no error/
discrepancy

Trainee’s Signature over printed name Trainer’s Signature over printed

name

Qualification Title : DRIVING NC II

Unit of Competency: Move and position vehicle

25 | P a g e
 Learning Trask/Activity Date Supervisor’s
Outcome Required accomplished remarks

Gain the required

Theoretical knowledge prior to
driving (for the actual driving
student-drive’s
Acquired relevant
permit
information
applicant)
required on pre-
driving orientation
Correct check-up
procedures
performed
Prepare vehicle
for driving Driver’s manual is
assessed and
observed

Select vehicle to
be moved or re-
position
Move and
position vehicle
Drive the vehicle
to appropriate
location

Vehicle position is
checked as per
Check the
required
vehicle Vehicle is checked
for external
damaged

Trainee’s Signature over printed name Trainer’s Signature over printed

name

26 | P a g e
 CORE
COMPENTENCIE
S

27 | P a g e
Qualification Title : DRIVING NC II

Unit of Competency: Carry out minor vehicle maintenance servicing

Learning Trask/Activity Date Supervisor’s

Outcome Required accomplished remarks

Vehicle is cleaned
as per prescribed
Clean the procedures
Vehicle
Wastes are
disposed of as per
relevant ordinance
Minor routine
checks are
Maintain and undertaken
service the Minor routine
vehicle system repair and
servicing are
undertaken

Trainee’s Signature over printed name Trainer’s Signature over printed

name

28 | P a g e
Qualification Title : DRIVING NC II

Unit of Competency: Drive light vehicles

Learning Trask/Activity Date Supervisor’s

Outcome Required accomplished remarks

Vehicle inspection
Perform light
is performed
vehicle pre-
starting and
Warm up of light
warm-up
vehicle is
performed
Light vehicle is
driven in
accordance with
traffic rules and
Drive light
regulations
vehicle
Driving hazards
are identified
and/or anticipated
Defective or
irregular
performed or
malfunctions are
Monitor and monitored and
maintain vehicle reported
performance
Minor vehicle
maintenance is
performed

Trainee’s Signature over printed name Trainer’s Signature over printed

name

29 | P a g e
Qualification Title : DRIVING NC II

Unit of Competency : Obey and observed traffic rules and

regulations

Learning Trask/Activity Date Supervisor’s

Outcome Required accomplished remarks

Traffics signs and

road markers are
Observe traffic identified
signs and road Follow in
markers accordance with
concerned traffic
authorities
Traffic rules and
regulations are
Obey traffic identified
rules and License and
regulations registration are
maintained as
prescribed by law
Positive work
values are
demonstrated
Practice
courtesy Complaints are
responded and
handled with
respect
Traffic authority
Respect traffic instructions are
complied
enforcers and
other traffic Traffic violation
management tickets/receipts
issued by Traffic
unit
enforcers are
accepted

30 | P a g e
 Trainee’s Signature over printed name Trainer’s Signature over printed
name

Qualification Title : DRIVING NC II

Unit of Competency: Implement and coordinate accident/

Emergency procedures

Learning Trask/Activity Date Supervisor’s

Outcome Required accomplished remarks

Vehicle is cleaned
as per prescribed
Respond to procedures
emergencies
Wastes are
disposed of as per
relevant ordinance
Minor routine
checks are
Arrange follow- undertaken
up support and Minor routine
assistance repair and
servicing are
undertaken

Trainee’s Signature over printed name Trainer’s Signature over printed

name

31 | P a g e
 POST TEST

Qualification: Driving NCII

Multiple choice:

DIRECTION: Select the correct answer and write the letter of your choice in your answer sheet:

1. What is the registration month for the vehicle with plate number ending 8?

a. January c. August

b. May d. October

2. What is the motor vehicle plate color for diplomat?

a. White background with red mark c. white background with red mark

b. Green background with white mark d. none of this

3. What will you do when an emergency vehicle is approaching you?

a. follow the vehicle c. speed up your vehicle

b. stops immediately at the middle d. give way to clear the road

4. During brake failure while cruising the vehicle, what is the best thing to do?

a. shut off ignition switch c. down-shift gear and apply hand brake

b. pull hand brake d. none of these

5. What statement is incorrect when driving along the curve?

32 | P a g e
 a. Before entering the curve, slow down and stay on your lane

b. Accelerate fully after entering to pass the curve immediately

c. do not pass or cut corners or curve

d. curves are always dangerous

6. What is the meaning of a broken white line road marker?

a. avoid overtaking

b. Overtaking is allowed when no vehicle on the other lane

c. Vehicle must stop when someone is crossing

d. limit your speed to 60 kph

7. Which of the following motor vehicle plate is described as white background and green mark?

a. Government plate c. for hire

b. Private d. diplomat

8. Which of the following is the age requirements for an applicant of a professional driver’s
license?

a. 16yrs c. 18yrs above

b. 17yrs d. 21yrs above

9.Which of the following is the best driving practice during emergency stopping?

a. Shut off ignition switch while the engine is moving

b. pull hand brake

c. depressed clutch pedal and shift to neutral

d. slows down the vehicle and look for a safe place for parking

10. Which of the following is the proper acceleration technique?

a. quickly accelerate so that you may have a good start

b. gradually depressing gas pedal to slow down the movement

c. accelerates smoothly to posted speed limit

d. gradually depresses gas pedal and gas pedal

33 | P a g e
11.When temperature gauge reach ¾ mark it indicates that the engine components is?

a. overheating c. no water on reservoir

b. low coolant level d. all of the above

12. Green light in the traffic lights indicates?

a. ready to stop c. you can turn left

b. vehicle on the other side must stop d. go

13. Which of the following is the best driving practice when starting an engine equipped with
automatic transmission?

a. depresses the brake pedal while transmission is in “P” position

b. depresses the brake pedal while transmission is in “R” position

c. depresses the brake pedal while transmission is in “N” position

d. depresses the brake pedal while transmission is in “D” position

14. Which of the following vehicle components guides the vehicle direction?

a. Steering c. transmission

b. clutch d. brakes

15. Which statement is correct for pedestrian safety?

a. don’t mind the pedestrian

b. stop or slow down in the pedestrian

c. accelerate speed to pass the pedestrian lane immediately

d. use your horn to stop them

16. What precaution you must observe when driving down the hill?

a. step on the brake to slow down the vehicle c. shift to lower gear

b. step on the clutch d. shift the transmission to neutral

17. Which of the following pedal should be step before shifting gears in manual transmission?

a. accelerator pedal c. clutch pedal

b. brake pedal d. hand brake

18. What is the meaning of a red light in the traffic light?

34 | P a g e
 a. expects someone will cross the line c. caution when passing

b. go ahead d. vehicle must stop

19. What will you do when the tire of your car burst at crossing speed?

a. maintain your speed

b. slow down and prepare for emergency stop

c. depresses the brake pedal immediately

d. pull over immediately

20. What is the meaning of a road sign with one solid yellow line and broken line road marker?

a. Overtaking is allowed if the solid line is on your side

b. do not overtake if the solid line is on your side

c. slow down if the solid line is on your side

d. limit your speed to 80 kph if the solid line is on your side

21. What part of the vehicle that you should frequently check?

a. fluid level c. tire

b. lights d. all of the above

22. Which of the following driver’s license required for the driver for public utility vehicles and
other commercial vehicles?

a. non-professional driver’s license c. professional driver’s license

b. student’s driver’s license d. international license

23. What is the meaning of the solid line in front of the intersection?

a. full stop c. give way sign

b. caution d. go ahead

24. When driving along the school bus that is loading or unloading the student’s, you should?

a. stay near the bus c. stay far enough back from the bus

b. stay at the right side of the bus d. stay at the left side of the bus

25. What signal you should turn in an emergency?

a. headlight c. taillight

35 | P a g e
 b. hazard light d. signal light

26. When battery signal light-on during driving, it indicates?

a. low fluid level c. low oil level

b. defective charging system d. defective headlight

27. What must you do when someone is tailgating you?

a. speed up your vehicle c. slow down and let the vehicle pass

b. stop the vehicle and wait for the other driver d. switch on your hazard light

28. If the engine begins lugging, you must shift to?

a. higher gear c. medium gear

b. lower gear d. neutral gear

29. What is the meaning of the yellow light in the traffic light?

a. slow down and prepare to stop

b. increase acceleration

c. caution vehicle at the other side will begin to move

d. give way to the vehicle at your side

30. Which of the following tips helps avoid fatigue in driving?

a. keeps your vehicle comfortably cool and well ventilated

b. use sunglasses on bright days

c. starts your trip in a well-rested condition

d. all of the above

31. Land Transportation and Traffic Code is also known as?

a. RA 8850 c.RA4136

b. RA 7794 d.RA9003

32. What is the minimum distance when parking near the hydrant?

a. 1meter c. 4 meters

b. 3 meters d. 6meters

36 | P a g e
33. What is the requirements for an applicant who wants to apply for a non-professional driver’s
license?

a. the applicant must be 16yrs and above

b. he/she must pass the written examination

c. he/she must have a student permit issued at least 6 months

d. all of these

34. Which if the following is not a common cause of fatigue?

a. lack of rest c. driving for short distance

b. moderate drinking of alcohol d. vigorous physical activities

35. The part of the vehicle that control the speed until it stops?

a. steering c. transmission

b. clutch d. brake

36. Why seat belt is necessary?

a. to support the driver to uneven road condition

b. to deploy during head-on collision

c. to reduce injuries and fatalities in motor vehicle collision

d. to protect the driver from possible injuries in motor vehicle collision

37.Which of the following produces carbon monoxide?

a. aircon leak c. perfume

b. exhaust gas d. smoking

38.Which of the following driving habits helps reduce fuel consumption?

a. Drive at constant speed

b. when driving downhill step-down accelerator pedal

c. drives at constant speed

d. drive the vehicle while the engine is cold

39. What is the agency of the government that grants the commemorative plate?

a. LTO c. MMDA

37 | P a g e
 b. Office of the President d. PNP-HPG

40. An Act requiring all public and private vehicle to have Seat Belt is called?

a. RA 8550 c. RA8750

b. RA 7794 d. none of these

41.How long is the validity of student permit?

a. 2months c. 12months

b.8months d. 3yrs

42. What is the best practice to alert the inattentive pedestrian?

a. stay on the left side of the road c. accelerate to move fast

b. flash the headlight d. activates your horn twice

43. In a multi-lane highway, which lane is for the slow-moving vehicle?

a. far left c. middle lane

b. far right d. shoulder

44. What safety measures must you observe when the brake light symbol appears in the
dashboard?

a. drive back your vehicle in your house c. refill the brake fluid

b. immediately stops and park your vehicle d. don’t mind the signal

45.Which gear shift position indicates the start of moving of the vehicle?

a. 4th gear c. 2nd gear

b. 1st gear d. 5th gear

46. Which of the following component disengages and engages the power of the engine to the
driveline?

a. steering c. brake

b. transmission d. clutch

47. When handbrake indicator lamp lights-on, even the hand brake is already released, it
indicates?

38 | P a g e
 a. defective brake system c. low fluid level

b. low fluid level d. none of these

48. Which of the following pedal should be step on before shifting on manual transmission?

a. accelerator pedal c. clutch pedal

b. brake pedal d. hand brake

49.Which of the following is the registration month for a vehicle with plate number ending 9?

a. January c. may

b. august d. September

50. Flashing yellow lights indicates?

a. go with caution c. emergency

b. give way to the vehicle at your back d. ready to move

39 | P a g e
In case of an emergency, you are required to perform the following:

 Potential emergency situations are identified and asses based on emergency

procedures
 Prioritized action and provide action to critical situation
 Prepare incidents report in accordance with proper procedures
 Responsibility is fulfilled in accordance with emergency procedure and/or regulatory
requirements
 Support and arrange medical assistance
 Apply first aid in accordance with medical procedures
 Identify needs of passenger and provides their needs based on the situation

During the demonstration of skills,

YES NO N/A
did the candidate:

 Identify and potential emergency

situational and assess based on
emergency procedures
 Prioritized action and provide action to
critical with proper procedures

 Prepared incidents report in

accordance with proper procedures

 Fulfilled responsibility in accordance

with emergency procedure and/or
regulatory requirements
 Arrange and support medical
assistance

 Apply first aid in accordance

assistance

 Identify needs of passenger and

provides their needs based on the
situation

40 | P a g e
41 | P a g e