1

MATERIALS:
 100% Cotton yarn (combed, gassed,  Tapestry needle, pins and scissors
mercerised) 50 g / 125 m  Fiberfill/ toy stuffing
- White yarn  Stitch marker or a strand of thinner
- Color of your choice yarn
 2.5 mm crochet hook

 ch = chain
 st = stitch
 sl st = slip stitch
 sc = single crochet
 inc = single crochet increase (work 2 single crochets into the same stitch)
 dec = single crochet decrease (single crochet 2 stitches together)
 FLO = front loop only
 BLO = back loop only
 […] = number of stitches you should have at the end of the round/Rnd
 (…) x… = repeat whatever is between the brackets the number of stated

This pattern is written using American terminology (US-TERMS) and is

worked in Continuous rounds unless otherwise stated. I recommend you always makethe start of each
round, using a stitch marker or a strand of thinner yarn.

NOTE: I recommend, when you decrease (dec) in this pattern, always use the invisible decrease.
(working in the front loop only).

Beginner/Easy

approx. 29 cm long
approx. 13 cm high with the horn

2
 Change color of your
choice.
With color of choice
Rnd 10: ch 1, (6 sc, dec) x
Ch 24, join with sl st to the first
6, join round with sl st [42]
chain / Do not twist the yarn.
Rnd 11: ch 1, 2 sc, dec, (5
Rnd 1: ch 1, sc in same space as
sc, dec) x 5, 3 sc, join round
prev. sl st, sc around, join round
with sl st [36]
with sl st [24]
Rnd 12: ch 1, (4 sc, dec) x 6, join round with
Rnd 2: ch 1, (3 sc, inc) x 6, join round with sl
sl st [30]
st [30]
Change color of your choice.
Change color of your choice.
Rnd 13: ch 1, (3 sc, dec) x 6, join round with
Rnd 3: ch 1, 2 sc, inc, (4 sc, inc) x 5, 2 sc, join
sl st [24]
round with sl st [36]
Rnd 14: ch 1, sc around, join round with sl st
Rnd 4: ch 1, (5 sc, inc) x 6, join round with sl
[24]
st [42]
Fasten off, leaving a long tail for
Rnd 5: ch 1, 3 sc, inc, (6 sc, inc) x
sewing.
5, 3 sc, join with sl st [48]
Change color of your choice.
Using needle and thread, sew Rnd 1
Rnds 6-9 (4 rows): ch 1, sc
and Rnd 14 together while stuffing
around, join with sl st [48]
with fiberfill before finishing.

With white yarn Rnd 8: 12 sc, 6 inc, 12 sc [36]

Rnd 1: 6 sc in magic ring [6] Rnd 9: 12 sc, (sc, inc) x 6, 12 sc [42]
Rnd 2: 6 inc [12] Rnd 10: 12 sc, (2 sc, inc) x 6, 12 sc
Rnd 3: (sc, inc) x 6 [18] [48]
Rnd 4: sc, inc, (2 sc, inc) x 5, sc [24] Rnd 11: 13 sc, inc, (3 sc, inc) x 5, 14 sc [54]
Rnd 5: (3 sc, inc) x 6 [30] Rnds 12 -18 (7 rows): sc around [54]
Rnds 6 - 7 (2 rows): sc around [30] Rnd 19: 13 sc, dec, (3 sc, dec) x 5, 14 sc [48]

3
Rnd 20: 12 sc, (2 sc, dec) x 6, 12 sc [42] Fasten off, leaving a long tail for sewing and
Rnd 21: 12 sc, (sc, dec) x 6, 12 sc [36] sew close.
Rnd 22: (4 sc, dec) x 6 [30]
Using your yarn needle, weave the yarn tail
Rnd 23: 2 sc, dec, (3 sc, dec) x 5, sc [24]
through the frohnt loop of each remaining
Stuff the head firmly with fiberfill.
stitch and pull it tight to close.
Rnd 24: (dec, 2 sc) x 6 [18]

Rnds 9 - 14 (6 rows): sc around [48]

Change color of your choice.
Start with white yarn
Rnd 15: (6 sc, dec) x 6 [42]
Rnd 1: 6 sc in magic ring [6]
Rnd 16: 3 sc, dec, (5 sc, dec) x 5, 2 sc [36]
Rnd 2: 6 inc [12]
Rnd 17: (4 sc, dec) x 6 [30]
Rnd 3: (sc, inc) x 6 [18]
Change color of your choice.
Rnd 4: sc, inc, (2 sc, inc) x 5, sc [24]
Rnd 18: sc, dec, (3 sc, dec) x 5, 2 sc
Rnd 5: (3 sc, inc) x 6 [30]
[24]
Rnd 6: 2 sc, inc, (4 sc, inc) x 5,
Rnd 19: (2 sc, dec) x 6 [18]
2 sc [36]
Stuff the butt firmly with fiberfill.
Rnd 7: (5 sc, inc) x 6 [42]
Fasten off, weave in ends.
Rnd 8: 3 sc, inc, (6 sc, inc) x 5,
Using your two thumbs, push out the
3 sc [48]
center poly fiber into a hole wide and deep
enough to fit the insert.

With color of your choice Rnds 4 - 10 (7 rows): sc around [18]

Rnd 1: 6 sc in magic ring [6] Fasten off, leaving a long tail for
Rnd 2: 6 inc [12] sewing.
Rnd 3: (sc, inc) x 3 [18] Sew inside of the butt into the butt.
4
With color of you choice Stuff the pillar firmly with fiberfill as
Rnd 1: 6 sc in magic ring [6] you go along
Rnd 2: 6 inc [12] Rnds 4 – 47 (44 rows): sc around [15]
Rnd 3: (3 sc, inc) x 3 [15] Fasten off, leaving a long tail for
sewing and sew to the head.

Check the correct length of the pillar before cutting the yarn by trying to
insert every donut into the pillar and the butt.

Starting with yellow gold yarn Stuff the leg with fiberfill.
Rnd 1: 6 sc in magic ring [6] Rnd 15: Flatten the opening of the leg and
Rnd 2: (sc, inc) x 3 [9] sc in each of next 4
Rnd 3: sc around [9] stitches through both
Change color to layers to close the
white yarn opening.
Rnds 4 - 14 (11 Fasten off, leaving a
rows): sc around [9] long tail for sewing.

With color of your choice Rnd 3: (2 sc, inc) x 2 [8]

Rnd 1: 4 sc in magic ring [4] Rnd 4: (3 sc, inc) x 2 [10]
Rnd 2: (sc, inc) x 2 [6] Rnd 5: (4 sc, inc) x 2 [12]
BLO >> we’ll work now in back Rnds 6 -12 (7 rows): sc around [12]
loop only Join with sl st, ch 1, turn

5
FLO >> we’ll work now in front loop only Stuff the horn with fiberfill.
sl st in every stitch from Rnd 12 till Rnd 3.
Fasten off, leaving a long tail for sewing.

With color of your choice.

Ch 30,
Rnd 1: (starting from 2nd chain from hook), inc in every st to the end.
Fasten off, leaving a long tail for sewing.

With color of your choice

Ch 40,
Rnd 1: (starting from 2nd chain from hook), inc in every st to the end.
Fasten off, leaving a long tail for sewing.

With color of your choice

Ch 30,
Rnd 1: (starting from 2nd chain from hook), inc in every st to
the end.

Fasten off, leaving a long tail for sewing.

6
With white yarn
Ch 6,
Rnd 1: (starting from 2nd chain from hook), 4 sc, 5 sc in last ch, continue all round to other side
of chain, 2 sc, ch 1, turn [11]

Rnd 2: 3 sc, 3 inc, 5 sc, ch 3, turn [14]

Rnd 3: (starting from 2nd chain from hook), 2 sc, 12 sc, ch 1, turn [14]

Rnd 4: 2 sc, 3 inc [8]

Fasten off invisibly, leaving a long tail for sewing.

7
With white yarn Flatten the opening of the ear and sc in
Rnd 1: 6 sc in magic ring [6] each of next 6 stitches through both
Rnd 2: (sc, inc) x 3 [9] layers to close the opening.
Rnd 3: (2 sc, inc) x 3 [12]
Rnd 4: (3 sc, inc) x 3 [15] Fold the ear and sew a few
Rnd 5: (4 sc, inc) x 3 [18] stitches.
Rnds 6 – 9 (4 rows): sc around [18]
Fasten off, leaving a long tail for
Rnd 10: (sc, dec) x 6 [12]
sewing.

ASSEMBLY:

1. Sew the donut rings, using needle and thread, sew Rnd 1
and Rnd 14 together while stuffing with fiberfill before
finishing.

2. Stuff the butt with fiberfill, using your two thumbs, push out the center poly fiber into a
hole wide and deep enough to fit the insert,
sew inside the butt into the butt.

3. Sew the tail to the butt. The top of each tail

should be sewn between Rnd 7 and 8 of the butt, sew all the tails together to form a bunch.

8
4. Sew the wings onto the donut ring between Rnd 7 and 8 of the donut ring.

5. Sew the horn over rows 15 and 17.

6. Sew the ears to the head, over rows 15 and 17,

keep 3 stitches from the horn apart.

7. Sew the mane to the head. Switch between long and short.

9
8. Sew the legs to the head. The top of each leg should be sewn between Rnd 20 and 21 of the
head, between both legs keep 8 stitches apart. Sew a few extra stitches (4-5 stitches)
along each leg to hold the legs snug against the head.

9. Embroider the eyes with black yarn over rows 11 and 15.

10. Embroider the nose with black

yarn over rows 4 and 5.

10
11. Sew the legs to the butt. The top of each leg should be sewn between Rnd 14 and 15 of
the butt, between both legs keep 7 stitches apart. Sew a few extra stitches (4-5 stitches)
along each leg to hold the legs snug against the butt.

12. Sew the pillar to the head.

11