KPM - THREE PHASE ENERGY METER REFERENCE (MT 3000D+)

KPM MT3000D+ is designed by KPM Engineering for electricity & power measurement department to test Three phase energy meter at
site.

MT 3000D+
is a
customized
portable
Energy
Meter Test
Reference
with 0.1% &
0.05%
Accuracy

Function
1. It can measure current, voltage, power, phase, frequency at
10 Data administration: The system can display, automatic save and
the same time, and calibrate error, with two positions for
print measured data, can manage and query data
auto switch.
11 Equipped with clock can display time and date directly.
2. Measure current ratio, waveform display and working
temperature and humidity, and calculate power factor.
12 The equipment was equipped with high accuracy CT, which is
convenient for measuring low voltage user and metering
3. Can display the waveform and distortion for three phases
case.
voltage and current at the same time, can analyze harmonic
within 51 times.
13 Small dimension about 210*155*50mm(length*height*width),
portable, light weight(≤1.1kg).
4. Can judge 144 kinds of wrong connections (three phases
three wires: 48 kinds; three phases four wires: 96 kinds).
14 Has three kinds of power supply mode:
5. Can measure electric energy, demand and calibrate meter.
• Voltage measurement end of power supply
• Lithium batteries of power supply
6. Can support scanning bar code, test two meters
• Ac source power supply range: 50V～440V
simultaneously .

7. Number input and alphabet input

8. Low power dissipation, use lithium batteries: using 8 hours

to 10 hours, power consumption 3.3 W. LCD screen with display of
9. Large , high quality bright LCD display testing data and vector chart .

*All product specifications & pictures are subject to upgrade without prior notification Key Parameter Monitoring
 KPM - THREE PHASE ENERGY METER REFERENCE (MT 3000D+)

Technical Specifications Accessories

•Class of accuracy for voltage, current, active power and active 1. Set voltage testing leads - 1 Nos
electric energy (built-in current transformer): Class 0.02%, 0.05%.
2. Set of current testing leads – 1 Nos
•Class of accuracy for reactive power and reactive electric
energy: Class 0.05%, 0.1%. 3. Current clamps (5A) - 3 Nos

•Voltage input: 30V～560V, 60V, 120V, 240V, 480V Shift Four, 4. Electric photo head – 1 No
automatic gear shift.
5. Serial com leads – 1 No
•Current input: built-in current transformer: 0.05～12A,
automatic gear shift.
6. User Manual – 1 No

Clamp meter: 5A, 10A, 20A, 100A, 200A, 500A, 1000A and
7. MT3000D+ data management software
2000A for selection.
8. Impulse input leads – 1 No
•Fundamental Error
9. Impulse output lead (when checking MT3000D+ ) – 1 Nos
•Phase measurement range: 0.000°～360°（or 0.000°～±180°
）, Resolution ratio: 0.001°. Accuracy: ±0.0 2°（current 10. Manual switch – 1 No
input>10%Ib）
11. 220V power connected box
•Frequency measurement: resolution ratio: 0.001H, Accuracy:
±0.01Hz. 12. Power leads

•Input electric energy pulse: TTL level, max. frequency ≤２ＭＨz. 13. big clamp (selectable 100A,200A,500A,1000A ) – 1 No

•Output electric energy pulse: rated range is f=60KHz as 14. Verification certificate when leaving factory
automatic constant.
It can be set between 1～250000 as hand constant. 15. Guarantee card

•Temperature coefficient: 5ppm.

Fundamental
•Low voltage input impedance: >750KΩ; Load Current Power Factor Margin of Error
(%)
•Current input impedance: <0.05Ω; 0.05Ib 1.0 ±0. 05

•Input signal frequency: 45～65Hz;

0.01Ib~Imax 1.0 ±0.0 2
•Accuracy for PT secondary voltage drop (90%～110%Un): angle
error 0.2´; ratio error 0.02%;
0.1Ib 0.5（L）)；0.8（C） ±0. 075
•Accuracy for PT, CT secondary load measurement: Class 1.0
Measurement range: admittance: 1.0～99.99（ms）;
Impedance: 0.1～8（Ω）; 0.2Ib 0.5（L）)；0.8（C） ±0.0 5

•Accuracy for clock measurement: ±0.5ppm; 0.05s/d;

0.5Ib~ Imax 0.5（L）)；0.8（C） ±0.0 2
•Power supply: frequency 50Hz, range 45～450V;

•Power consumption: ≤13VA;

•Operating ambient temperature; -10℃～40℃ humidity: 30～

80%RH;
KPM ENGINEERING SOLUTIONS PVT. LTD.
815 A, 8th Floor, Unitech Arcadia, Sec 49,
•Volume: 365mm L×269mm W×151mm H; Gurugram – 122018 ,Haryana
Website : www.kpmtek.com , Email : sales@kpmtek.com
•Dead weight of instrument: 4Kg. Phone No : +91 124 4001088

*All product specifications & pictures are subject to upgrade without prior notification Key Parameter Monitoring