Job Name: AER-20-03-0605-VG Cut Sheet
Tag: MK-1
Quantity: 1
Printed Date: December 11, 2024
Model: AER-20-03-0605-VG
Sidewall Direct Drive Exhaust Fan
Standard Construction Features: Galvanized steel panel with fabricated galvanized steel drive frame
(optional wall housing or wall collar). Propeller, fabricated steel (02) or cast aluminum (03). Direct driven
motor in the airstream.
0.24 0.024
Fan Configuration
Brake Horsepower (BHP)
Static Pressure (in. wg)
0.2 0.02
Drive type Direct
66
0.16 6F 0.016
RP
M
0.12 0.012
Performance
0.08 0.008
Requested Volume (CFM) 50
Actual Volume (CFM) 50 0.04 0.004
Total External SP (in. wg) 0.2
0 0
Fan RPM 666 0 2 4 6 8 10 12 14
Operating Power (bhp) 0.02 Volume (CFM) x 100
Startup Power (bhp) 0.02
FEI - Fan curve
Air Stream Temp (F) 70 Brake horsepower curve
Start-up Temp (F) 70 Operating Point SP
Air Density (lbs/ft^3) 0.075 Operating Bhp point
Elevation (ft) 15 Max system curve
Static Efficiency (%) 8 System curve
Outlet Velocity (ft/min) 22
Motor Sound
Octave Bands (hz) LwA dBA Sones
Size (hp) 1/4
62.5 125 250 500 1000 2000 4000 8000
V/C/P 115/60/1
NEC FLA (Amps) 3.8 Inlet 61 55 54 55 50 48 41 35 56 45 3.5
Min Circuit Ampacity (MCA) 4.8
Max Overload Production (MOP) 15
Short Circuit Current Rating (SCCR) 5 kA
Greenheck Fan Corporation certifies that the model shown herein
is licensed to bear the AMCA Seal. The ratings shown are based on
tests and procedures performed in accordance with AMCA
Publication 211 and AMCA Publication 311 and comply with the
requirements of the AMCA Certified Ratings Program.The AMCA
certified ratings seal applies to sound and air performance ratings
only.Performance certified is for installation type A: Free inlet, free
outlet.Power rating does not include transmission
losses.Performance ratings do not include the effects of
appurtenances.The sound ratings shown are loudness values in
hemispherical sones at 1.5 m (5 ft) in a hemispherical free field
calculated per ANSI/AMCA Standard 301. The A-weighted sound
FLA - based on tables 150 or 148 of National Electric Code 2002. Actual ratings shown have been calculated per AMCA International
motor FLA may vary, for sizing thermal overload, consult factory. Standard 301.Values shown are for Installation Type A: free inlet
MCA and MOP values shown only account for the motor, not accessories hemispherical sone levels.dBA levels are not licensed by AMCA
(damper actuator, field supplied VFD, etc.). International. The AMCA Certified Ratings Seal applies to LwiA and
SCCR is a rating on components and assemblies representing the inlet sone ratings only.
maximum level of short-circuit current that a component or assembly can
withstand without causing a fire or shock hazard. A short circuit
exceeding this rating can cause catastrophic and violent equipment,
component and enclosure failure.
Page 1 of 2 Version 3.9.0, September 2024
Job Name: AER-20-03-0605-VG Cut Sheet
Tag: MK-1
Quantity: 1
Printed Date: December 11, 2024
Dimensions and Weights
Label Value Description
- 20.125 Wheel Diameter (in)
- 68 Weight w/o accessories (lbs)
*All dimensions are in inches.
Page 2 of 2 Version 3.9.0, September 2024
