Solutions Inc.
DP-6100 Line
DFCI DP-6100 Latches offer quarter turn operation, with locking, under tension, over a
wide range of material thicknesses. Most of the DP-6100 Latches are fully adjustable
and are useful for equipment doors with gaskets or any access location subject to wide
thickness or misalignment tolerances.
DFCI ® is a registered trademark of DFCI Solutions, Inc. DP-1
Copyright © 2002-2005 by DFCI Solutions, Inc. All rights reserved.
DP-6100 Line Solutions Inc.
6170
6170 is a smaller version of the 6175. It consists of a helical
spring pawl that varies its grip length with rotation and is capable
of latching a wide range of support thicknesses. The sloped pawl
design also allows the operator to adjust the applied clamping
force.
Material
Latch Heads: As listed
Latch Body: Steel, zinc plate, yellow chromate
Spring Pawl: Zinc plated
Grip Range (G): .039” to .250” (0.99 to 6.35 mm)
Knurled Head (K) Pan Head
Part Number Head Head Finish (all with chromate surface)
6170-AY Slot Zinc plate with yellow chromate
Part Number Head Finish 6170-AB Slot Zinc plate with Black Chromate
6170-KY Zinc plate with yellow chromate 6170-HY Hex Zinc plate with yellow chromate
Installation Procedure
Plastic Knob Head (P)
Max. Load Without Distortion: 9 lb.
Max. panel with knob: .177” (4.50 mm)
Knob is supplied unattached and is pressed onto head
after installing latch.
Part Number Head Finish Panel Preparation Under-Panel Dimensions
6170-P Black Thermoplastic
DP-2 DFCI ® is a registered trademark of DFCI Solutions, Inc.
Copyright © 2002-2005 by DFCI Solutions, Inc. All rights reserved.
Solutions Inc.
DP-6100 Line
6175
6175 is a larger version of the 6170. It consists of a helical spring pawl that
varies its grip length with rotation and is capable of latching a wide range of
support thicknesses. The sloped pawl design also allows the operator to
adjust the applied claming force.
Material
Latch Heads: As listed
Latch Body: Steel, zinc plate, yellow chromate
Spring Pawl: Zinc plated
Grip Range (G): .078” to .438” (1.98 to 11.13 mm)
Note: Part Number 6175-KS: All 300 series stainless steel construction
Knurled Head (K) Pan Head
Part Head Finish (all with chromate
Head
Number surface)
Part Number Head Finish 6175-AY Slot Zinc plate with yellow chromate
6175-AB Slot Zinc plate with Black Chromate
6175-KY Zinc plate with yellow chromate
6175-HY Hex Zinc plate with yellow chromate
Installation Procedure
Plastic Knob Head (P)
Max. Load Without Distortion: 23 lb.
Max. panel with knob: .250” (6.35 mm)
Knob is supplied unattached and is pressed onto head after
installing latch.
Part Number Head Finish Under-Panel
6175-P Black Thermoplastic Panel Preparation
Dimensions
DFCI ® is a registered trademark of DFCI Solutions, Inc. DP-3
Copyright © 2002-2005 by DFCI Solutions, Inc. All rights reserved.
DP-6100 Line Solutions Inc.
6137
The 6137 Pawl Latch provides basic quarter-turn latching at a low installed
cost. Studs, in black acetal plastic, are available with attractive wing, knob,
or slotted heads. One-step installation consists of pushing the spring steel
pawl onto the stud and up against the underside of the panel. One-way tabs
on the pawl maintain its position and provide secure stud retention. The
latch closes under spring tension. No spacers are needed.
Material:
Stud: Black acetal copolymer.
Material burning rating code UL94HP. ASTM E0162.
Flame Spread Index: 130|
Operating temperature range: –40°F (-40°C) to +194°F (+90°C)
(+248°F (120°C) for short periods)
Pawl: Stainless steel spring temper.
Stud, Wing Head Stud, Slotted Knob Stud, Slotted Pawl
6137-2S
6137-1W 6137-1M 6137-1S
6137-2L
Fastener Selection and Installation
Recommended Pawl Deflection
1. Choose head style with part number Latch Locked
.010” (0.25 mm) Locked Tension 2 lb.
2. Select the correct pawl based upon your D Dimension to
.135” (3.43 mm) Locked Tension 8 lb.
6137-2S and 6137-2L
6137-2S 6137-2L
Use Pawl
D Dim.
Part Number
.010” to .125” .25 to 3.18 mm 6137-2S
.125” to .205” 3.18 to 5.21 mm 6137-2L
DP-4 DFCI ® is a registered trademark of DFCI Solutions, Inc.
Copyright © 2002-2005 by DFCI Solutions, Inc. All rights reserved.
