We begin develop from beyond others knowledge

MAZEN JADID FACTORY was started on 2003 in Kingdom of Saudi Arabia

as a fire & safety and fire fighting manufacturing Company. MAFCO is involved in
manufacture, design, supply, installation, testing & commissioning in various high
quality fire fighting equipment’s.

MAFCO provides quality of fire

protection systems. We have
professional engineers and
specialized technicians team for fire
protection system to Protect your
life and your investment. We
can offer wide range of design
solution in the field of fire
systems, fire alarms, addressable emergency systems, security systems.
 MAFCO is one of the leading factory in fire fighting and industrial safety
equipment. We provide the latest Technology and equipment allowing us to give our
customers the best services possible. We also do a follow up on all clients to ensure
that all equipment supplied is efficiently running and serviced on time. We have
grown out of the need of ensuring safety and professional guidance to the public for
safer and proper usage of all fire and industrial safety equipment.

OUR MISSION

It’s the policy of the company to provide customers with products and services which
achieve and sustain the highest possible quality standards. This statement is the basis
of our management philosophy and reflects the commitment of every individual
within the organization.

OUR VISION

Excel in what we do and build a safe and secure environment for our community.

OUR DISTINCTIVE QUALITIES

Standard Quality

Affordable products.

Unparalleled customer service.

On time delivery
OUR PROJECTS
MAFCO FOCUSES ON DESIGN, SUPPLY AND INSTALLATION WITH OUR
HIGHLY TRAINED AND EXPERIENCED ENGINEERS AND TECHNICIANS.

WE INVOLVED IN THE DESIGNING OF COMPLEX, ADVANCED COMMERCIAL

AND INDUSTRIAL FIRE PROTECTION SYSTEMS,LOW CURRENT SYSTEMS LIKE

FIRE ALARM SYSTEMS, PUBLIC ADDRESS TWO-WAY COMMUNICATION SYSTEMS.

OUR COMPLETED PROJECTS

MAFCO PROTECTED LARGE NUMBER OF FACTORY’S, HOSPITALS,
RESTAURANTS,SHOPPING MALLS, WAREHOUSES, TOWERS AND ALL OTHER

TYPE OF BUILDINGS. WE PROUDLY SAY, WE PROTECT THE FOLLOWING LIST

OF COMPANIES IN KINGDOM OF SAUDI ARABIA AGAINST FIRE.

JUFFALI - JEDDAH
ALSALAM MALL - JEDDAH
AZIZ MALL - JEDDAH
HAJI ALI REZA TOWER - BALAD - JADDAH
ALFAISEL KING HOSPITAL - JEDDAH
HASSAN GHAZAWI HOSPITAL - JEDDAH
NOON E COMMERCE SOLUTIONS
ALYAMAMA FOR GOLD JEWELRY
ALANDALUS MALL
DALLAH TOWER
ALFIRAS ENGINEERING OFFICE
CUBE METAL INDUSTRIES CO.
 ‫رﻣﺰك اﻟﺘﺠﺎري ‪QR Code‬‬
‫ﻣﻦ ﺧﻼﻟﻪ ﻳﻤﻜﻨﻚ اﻟﺘﺤﻘﻖ اﻟﻤﺒﺎﺷﺮ ﻣﻦ اﻟﻌﻠﻮﻣﺎت‪:‬‬

‫رﺧﺼﺔ اﻟﺒﻠﺪﻳﺔ‬ ‫اﻟﺴﺠﻞ اﻟﺘﺠﺎري‬

‫ﺑﺮﻧﺎﻣﺞ ﻧﻄﺎﻗﺎت‬ ‫ﺷﻬﺎدة اﻟﺴﻌﻮدة‬

‫اﻟﻐﺮﻓﺔ اﻟﺘﺠﺎرﻳﺔ‬ ‫ﺷﻬﺎدة اﻟﺰﻛﺎة‬

‫‪MCgovSA‬‬
‫‪www.mc.gov.sa‬‬
 ˽˹˼˹˺̀̀́˻̂
˰ϫ˺˽˻̂˹˼˻˽

̀˹˹˺˾˽˺̀́˼
Δϣϼγϟ΍Ε΍ΩόϣϊϳϧλΗϟΩϳΩΟϡϼγϟ΍ΩΑϋϥίΎϣϊϧλϣ
ΔΛϟΎΛϟ΍ΔϠΣέϣϟ΍˰ΔϳϋΎϧλϟ΍ΔϘρϧϣϟ΍ΓΩΟ
˿́˺˾˿̀˿ ˻˺˽˺́ ˼˺̂̀˺
˰ϫ˺˼̂˾ ϯέϭ˰˰γ ΩϳΩΟϡϼγϟ΍ΩΑϋϥίΎϣ
ϩΩΟ ˰ϫ˺˽˻̂˹˼˹̀ ˻˻˾˹˿˻˼˿˿˼
Ύϳέϭγ ˰ϫ˺˽˻́˺˻˹̀ ˼˺̀˹˼˼̀
ϱέΎΟΗϟ΍ίϣέϟ΍΢γϣ˯ΎΟέϟ΍ΔρηϧϷ΍ΕΎϧΎϳΑϰϠϋωϼρϼϟ

έϳϏϻρϘϓ்ϥϭϳϠϣ ˺˹˹˹˹˹˹
ΩϳΩΟϡϼγϟ΍ΩΑϋϥίΎϣ
˰ϫ˺˼̂˾ ϯέϭ˰˰γ
ϩΩΟ ˰ϫ˺˽˻̂˹˼˹̀ ˻˻˾˹˿˻˼˿˿˼

ΓΩΟ ΓΩΟ

˰ϫ˺˽˽˹˹˿˻˻ ˺˽˹˾˻˹̀̂ ˰ϫ˺˽˽˿˹˼˺˻

ϥΎγΎρϟ΍΢ϟΎλϑϳΎϧ
 ƥǞdzƻǛÞáÞƵǍǞNjǫǢǁƨǛƵǪƵƭ÷dzƻǛÞƵƤnjøéơǞNjǢǁǞ

đĊĊċďĎċđĒč

ĎĊčĊċđđĒČē

ċČĎđĒď

ċďĐĐĎĒĒĊĎ

čĊĊċċĒđČĎď

ØÞƷƭǰÞƦƱƧ

ċČđđĒĎ

ƵƭǧǪDz
 ‫‪1444/8/7‬‬ ‫ﺗﺎﺭﻳﺦ ﺍﻷﺻﺪﺍﺭ ‪:‬‬

‫‪585144487030912‬‬
‫‪1445/8/17‬‬
‫ﺭﻗﻢ ﺍﻟﺮﺧﺼﺔ ‪:‬‬

‫ﺗﺎﺭﻳﺦ ﺍﻻﻧﺘﻬﺎء ‪:‬‬

‫ﺭﺧﺼﺔ ﺗﺸﻐﻴﻞ‬

‫ﻣﺼﻨﻊ ﻣﺎﺯﻥ ﻋﺒﺪ ﺍﻟﺴﻼﻡ ﺟﺪﻳﺪ ﻟﺘﺼﻨﻴﻊ ﻣﻌﺪﺍﺕ ﺍﻟﺴﻼﻣﺔ‬ ‫ﻳﺮﺧﺺ ﻟـ ‪:‬‬

‫ﺭﺳﻢ ﺗﻮﺿﻴﺤﻲ ﻟﻠﻤﻮﻗﻊ‬ ‫‪1446/3/12‬‬ ‫ﺗﺎﺭﻳﺦ ﺍﻻﻧﺘﻬﺎء ‪:‬‬ ‫‪1429/3/24‬‬ ‫ﺗﺎﺭﻳﺨﻪ ‪:‬‬ ‫‪4030177829‬‬ ‫ﺭﻗﻢ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ ‪:‬‬

‫ﺟﺪﺓ ﺍﻟﺜﺎﻟﺜﺔ‬ ‫ﺍﻟﻤﺪﻳﻨﺔ ﺍﻟﺼﻨﺎﻋﻴﺔ ‪:‬‬

‫‪803764‬‬ ‫ﺭﻗﻢ ﺍﻟﻌﻘﺪ ‪:‬‬

‫‪0280S00043‬‬ ‫ﻣﻮﻗﻊ ﺍﻟﻌﻘﺎﺭ ‪:‬‬

‫ﺍﻟﺸﺮﻭﻁ ﻭﺍﻷﻧﻈﻤﺔ‪:‬‬

‫‪.1‬ﺗﻌﻨﻲ ﻫﺬﻩ ﺍﻟﺮﺧﺼﺔ ﺍﻹﺫﻥ ﺑﺘﺸﻐﻴﻞ ﺍﻟﻤﻨﺸﺄﺓ ﻭﺃﻥ ﺍﻟﻤﺮﺧﺺ ﻟﻪ ﺑﺘﺸﻐﻴﻞ ﻫﺬﻩ ﺍﻟﻤﻨﺸﺄﺓ ﻫﻮ ﺍﻟﻤﺸﻐﻞ ﺍﻟﺤﻘﻴﻘﻲ ﻟﻪ ﻭﻓﻖ ﻛﻴﺎﻧﻪ ﺍﻟﻘﺎﻧﻮﻧﻲ ﻭﺗﺮﺍﺧﻴﺼﻪ ﻭﺳﺠﻼﺗﻪ ﻭﻻ ﻳﺤﻖ ﻟﺼﺎﺣﺐ ﺍﻟﻤﻨﺸﺄﺓ ﺍﻟﺘﻨﺎﺯﻝ ﻋﻦ‬
‫ﺍﻟﺘﺸﻐﻴﻞ ﻭﺍﻟﺮﺧﺼﺔ ﺃﻭ ﺃﻱ ﺟﺰء ﻣﻨﻬﺎ ﻟﻠﻐﻴﺮ‪..‬‬

‫‪. 2‬ﻳﻠﺘﺰﻡ ﺍﻟﻤﺮﺧﺺ ﻟﻪ ﺑﺎﻟﺘﻘﻴﺪ ﺑﺎﻝ ﺷﺮﻭﻁ ﻭﺍﻻﻟﺘﺰﺍﻣﺎﺕ ﺍﻟﻤﻜﺘﻮﺑﺔ ﻓﻲ ﻫﺬﻩ ﺍﻟﺮﺧﺼﺔ ﻭﺑﻜﺎﻓﺔ ﺍﻷﻧﻈﻤﺔ ﻭﺍﻟﻠﻮﺍﺋﺢ ﻭﺍﻟﺸﺮﻭﻁ ﻭﺍﻟﺘﻌﻠﻴﻤﺎﺕ ﺍﻟﺼﺎﺩﺭﺓ ﻣﻦ" ﻣﺪﻥ"‪ ،‬ﻭﻳﺘﻢ ﺍﻟﺮﺟﻮﻉ ﻟﻸﻧﻈﻤﺔ ﻭﺍﻟﻠﻮﺍﺋﺢ ﺍﻟﺴﺎﺭﻳﺔ ﺍﻟﻤﻔﻌﻮﻝ‬
‫ﺍﻟﻤﻌﻤﻮﻝ ﺑﻬﺎ ﻓﻲ ﺍﻟﻤﻤﻠﻜﺔ ﺍﻟﻌﺮﺑﻴﺔ ﺍﻟﺴﻌﻮﺩﻳﺔ ﻓﻴﻤﺎ ﻟﻢ ﻳﺮﺩ ﺑﺸﺄﻧﻪ ﺗﻨﻈﻴﻢ ﻟﺪﻯ" ﻣﺪﻥ‪".‬‬

‫‪. . 3‬ﻳﻠﺘﺰﻡ ﺍﻟﻤﺮﺧﺺ ﻟﻪ ﺑﺘﺠﺪﻳﺪ ﻫﺬﻩ ﺍﻟﺮﺧﺼﺔ ﺧﻼﻝ ﻣﺪﺓ ﻻ ﺗﺰﻳﺪ ﻋﻦ ‪ 15‬ﻳﻮﻣﺎ ﺑﻌﺪ ﺍﻧﺘﻬﺎﺋﻬﺎ‪.‬‬

‫ﻋﻘﺪ ﺍﻹﻳﺠﺎﺭ ﺳﺎﺭﻱ ﺣﺘﻰ ‪ 1454/4/22 :‬ﻫـ‬

‫ﻳﻠﺯﻡ ﺍﻟﺗﺣﻘﻖ ﻣﻥ ﺻﺣﺔ ﻭﺻﻼﺣﻳﺔ ﺍﻟﺷﻬﺎﺩﺓ ﻋﺑﺭ ﺯﻳﺎﺭﺓ ﺍﻟﺭﺍﺑﻁ ﺍﻭ ﻋﻥ ﻁﺭﻳﻖ ﺃﺳﺗﺧﺩﺍﻡ ﺍﻟﺭﻣﺯ ﺑﺎﻷﺳﻔﻝ‬

‫‪Page 1 of 2‬‬
 ‫ﺗﺮﺧﻴﺺ ﻣﻨﺸﺄﺓ ﺻﻨﺎﻋﻴﺔ‬

‫ﺍﺳﺘﺜﻤﺎﺭ ﺃﺟﻨﺒﻲ‬

‫‪١٤٤٣-١١-٠٦‬‬ ‫ﺗﺎﺭﻳﺦ ﺍﻟﻘﺮﺍﺭ‬ ‫‪١٤٢٩-٠١-٠٥‬‬ ‫ﺗﺎﺭﻳﺦ ﺍﻟﺘﺮﺧﻴﺺ‬ ‫‪٣٧٢٩‬‬ ‫ﺭﻣﺰ ﺍﻟﻤﻨﺸﺄﺓ‬

‫‪١٤٤٨-١٢-٣٠‬‬ ‫ﺗﺎﺭﻳﺦ ﺍﻻﻧﺘﻬﺎﺀ‬ ‫‪٤٣٢١١٠١١٨٩٦١‬‬ ‫ﺭﻗﻢ ﺍﻟﻘﺮﺍﺭ‬ ‫ﺗﺠﺪﻳﺪ‬ ‫ﻧﻮﻉ ﺍﻟﻘﺮﺍﺭ‬

‫‪+٩٦٦٥٠٦٦٦٧٥١٦‬‬ ‫ﻫﺎﺗﻒ‬ ‫ﻣﺼﻨﻊ ﻣﺎﺯﻥ ﻋﺒﺪ ﺍﻟﺴﻼﻡ ﺟﺪﻳﺪ ﻟﺘﺼﻨﻴﻊ ﻣﻌﺪﺍﺕ ﺍﻟﺴﻼﻣﺔ‬ ‫ﺍﺳﻢ ﺍﻟﻤﻨﺸﺄﺓ ﺍﻟﺼﻨﺎﻋﻴﺔ‬
‫‪٧٠٠١٥٤١٧٨٣‬‬ ‫ﺍﻟﺮﻗﻢ ﺍﻟﻮﻃﻨﻲ ﺍﻟﻤﻮﺣﺪ‬ ‫‪٤٠٣٠١٧٧٨٢٩‬‬ ‫ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ ﻟﻠﻤﻨﺸﺄﺓ ﺍﻟﺼﻨﺎﻋﻴﺔ‬
‫)‪(N21.123239637545882 ,E39.341326677838424‬‬ ‫ﻣﻮﻗﻊ ﺍﻟﻤﻨﺸﺄﺓ ﺍﻟﺼﻨﺎﻋﻴﺔ‬ ‫ﻣﺎﺯﻥ ﻋﺒﺪ ﺍﻟﺴﻼﻡ ﺟﺪﻳﺪ‬ ‫ﻣﺎﻟﻚ ﺍﻟﻤﻨﺸﺄﺓ‬
‫ﻣﻨﻄﻘﺔ ﻣﻜﺔ ﺍﻟﻤﻜﺮﻣﺔ‬ ‫ﺍﻟﻤﻨﻄﻘﺔ‬ ‫‪٢٢٥٠٦٢٣٦٦٣‬‬ ‫ﺭﻗﻢ ﺍﻻﻗﺎﻣﺔ‬
‫ﺟﺪﺓ‬ ‫ﺍﻟﻤﺪﻳﻨﺔ‬ ‫ﺳﻮﺭﻳﺎ‬ ‫ﺍﻟﺠﻨﺴﻴﺔ‬
‫‪١١١٠٣٠٠١٢٣٥‬‬ ‫ﻭﺯﺍﺭﺓ ﺍﻻﺳﺘﺜﻤﺎﺭ‬ ‫ﺻﻨﻊ ﺍﻟﻤﻀﺨﺎﺕ ﻭﺍﻟﻀﻮﺍﻏﻂ ﻭﺍﻟﺼﻨﺎﺑﻴﺮ ﻭﺍﻟﺼﻤﺎﻣﺎﺕ ﺍﻷﺧﺮﻯ ‪/‬‬ ‫ﺍﻟﻨﺸﺎﻁ ﺍﻟﺮﺋﻴﺴﻲ‬
‫‪٢٨١٣‬‬

‫ﺃﺭﻳﻌﻮﻥ ﻓﺮﺩ َﺍ‬ ‫‪٤٠‬‬ ‫ﻋﺪﺩ ﺍﻟﻌﻤﺎﻟﺔ‬

‫ﻣﻠﻴﻮﻥ ﻭ ﺃﺭﺑﻌﻤﺎﺋﺔ ﻭ ﺳﺒﻌﺔ ﺃﻟﻔﺎ ﻭ ﺧﻤﺴﻤﺎﺋﺔ ﻭ ﺧﻤﺴﻮﻥ ﺭﻳﺎﻝ‬ ‫‪١٤٠٧٥٥٠.٠٠‬‬ ‫ﺣﺠﻢ ﺍﻻﺳﺘﺜﻤﺎﺭ‬

‫ﺍﻟﻮﺣﺪﺓ‬ ‫ﺍﻟﻄﺎﻗﺔ ﺍﻻﻧﺘﺎﺟﻴﺔ‬ ‫ﺍﻟﻨﺸﺎﻁ ﺍﻟﺼﻨﺎﻋﻲ‬ ‫ﻭﺻﻒ ﺍﻟﻤﻨﺘﺞ‬ ‫ﺭﻣﺰ ﺍﻟﻤﻨﺘﺞ‬

‫ﻃﻦ‬ ‫‪٢٠.٠‬‬ ‫‪ / ٢٨١٩٦٢‬ﺻﻨﻊ ﻣﻌﺪﺍﺕ ﺇﻃﻔﺎﺀ ﺍﻟﺤﺮﻳﻖ‬ ‫ﺍﻧﻈﻤﺔ ﺍﻃﻔﺎﺀ ﺑﺎﻟﻐﺎﺯ‬ ‫‪٨٤٢٤١٠٠٠‬‬

‫ﻃﻦ‬ ‫‪٢٠.٠‬‬ ‫‪ / ٢٨١٩٦٢‬ﺻﻨﻊ ﻣﻌﺪﺍﺕ ﺇﻃﻔﺎﺀ ﺍﻟﺤﺮﻳﻖ‬ ‫ﺍﻧﻈﻤﺔ ﺍﻃﻔﺎﺀ ﺍﺗﻮﻣﺎﺗﻴﻜﻴﺔ )ﻣﺎﺀ‪/‬ﺭﻏﻮﺓ(‬ ‫‪٨٤٢٤١٠٠٠‬‬

‫ﻣﺘﺮ ﻣﺮﺑﻊ‬ ‫‪٢٠٠٠٠.٠‬‬ ‫‪ / ٢٥١١٥٤‬ﺻﻨﺎﻋﺔ ﻭﺗﺮﻛﻴﺐ ﺍﻟﻨﻮﺍﻓﺬ ﻭﺍﻷﺑﻮﺍﺏ‬ ‫ﺍﺑﻮﺍﺏ ﻣﻌﺪﻧﻴﺔ ﻭﺍﻃﺎﺭﺍﺗﻬﺎ ﻣﻘﺎﻭﻣﺔ ﻟﻠﺤﺮﻳﻖ‬ ‫‪٧٣٠٨٣٠٠٠‬‬

‫ﻭﺯﻳﺮ ﺍﻟﺼﻨﺎﻋﺔ ﻭﺍﻟﺜﺮﻭﺓ ﺍﻟﻤﻌﺪﻧﻴﺔ‬

‫ﺑﻨﺪﺭ ﺑﻦ ﺇﺑﺮﺍﻫﻴﻢ ﺍﻟﺨﺮﻳﻒ‬

 ‫ﺗﺮﺧﻴﺺ ﻣﻨﺸﺄﺓ ﺻﻨﺎﻋﻴﺔ‬

‫ﺍﺳﺘﺜﻤﺎﺭ ﺃﺟﻨﺒﻲ‬

‫ﺍﻟﻮﺣﺪﺓ‬ ‫ﺍﻟﻄﺎﻗﺔ ﺍﻻﻧﺘﺎﺟﻴﺔ‬ ‫ﺍﻟﻨﺸﺎﻁ ﺍﻟﺼﻨﺎﻋﻲ‬ ‫ﻭﺻﻒ ﺍﻟﻤﻨﺘﺞ‬ ‫ﺭﻣﺰ ﺍﻟﻤﻨﺘﺞ‬

‫ﻭﺣﺪﺓ‬ ‫‪٥٠٠.٠‬‬ ‫‪ / ٢٨١٣٢٠‬ﺻﻨﺎﻋﺔ ﻣﻀﺨﺎﺕ ﻟﻠﺴﻮﺍﺋﻞ ﺑﺄﻧﻮﺍﻋﻬﺎ‬ ‫ﻣﻀﺨﺎﺕ ﺣﺮﻳﻖ‬ ‫‪٨٤١٣١٩١٠‬‬

‫ﻣﺘﺮ ﻣﺮﺑﻊ‬ ‫‪١٠٠٠٠.٠‬‬ ‫‪ / ٢٩١٠١٩‬ﺻﻨﺎﻋﺔ ﻭﺗﺠﻤﻴﻊ ﺟﻤﻴﻊ ﺃﻧﻮﺍﻉ ﺍﻟﺴﻴﺎﺭﺍﺕ ﻟﻤﺨﺘﻠﻒ ﺍﻻﺳﺘﺨﺪﺍﻣﺎﺕ ﺍﻷﺧﺮﻯ‬ ‫ﺻﻨﺎﺩﻳﻖ ﺣﺮﻳﻖ ﻭﻭﺣﺪﺍﺕ ﺗﺜﺒﻴﺘﻬﺎ‬ ‫‪٨٧٠٥٣٠٠٠‬‬

‫ﻭﺯﻳﺮ ﺍﻟﺼﻨﺎﻋﺔ ﻭﺍﻟﺜﺮﻭﺓ ﺍﻟﻤﻌﺪﻧﻴﺔ‬

‫ﺑﻨﺪﺭ ﺑﻦ ﺇﺑﺮﺍﻫﻴﻢ ﺍﻟﺨﺮﻳﻒ‬

 ‫ﺍﻟﺘﻌﻠﻴﻤﺎﺕ ﺍﻟﺨﺎﺻﺔ ﺑﺘﻨﻔﻴﺬ ﺍﻟﺘﺮﺧﻴﺺ‬
‫‪ .١‬ﺍﻻﻟﺘﺰﺍﻡ ﺑﻤﻮﺍﺩ ﻗﺎﻧﻮﻥ )ﻧﻈﺎﻡ( ﺍﻟﺘﻨﻈﻴﻢ ﺍﻟﺼﻨﺎﻋﻲ ﺍﻟﻤﻮﺣﺪ ﻟﺪﻭﻝ ﻣﺠﻠﺲ ﺍﻟﺘﻌﺎﻭﻥ ﻟﺪﻭﻝ ﺍﻟﺨﻠﻴﺞ ﺍﻟﻌﺮﺑﻴﺔ‬
‫ﻭﻻﺋﺤﺘﻪ ﺍﻟﺘﻨﻔﺬﻳﺔ‪.‬‬
‫‪ .٢‬ﻋﺪﻡ ﺇﺟﺮﺍﺀ ﺃﻱ ﺗﻮﺳﻌﺔ ﺃﻭ ﺗﻌﺪﻳﻞ ﻓﻰ ﺍﻟﻤﻨﺘﺠﺎﺕ ﻗﺒﻞ ﺍﻟﺤﺼﻮﻝ ﻋﻠﻰ ﻣﻮﺍﻓﻘﺔ ﺍﻟﻮﺯﺍﺭﺓ‪.‬‬
‫‪ .٣‬ﺍﻻﻟﺘﺰﺍﻡ ﺑﺘﺤﺪﻳﺚ ﺑﻴﺎﻧﺎﺕ ﺍﻟﻤﺼﻨﻊ ﻛﻞ ﺳﺘﺔ ﺍﺷﻬﺮ ﻣﻦ ﺧﻼﻝ ﻣﻮﻗﻊ ﺍﻟﻮﺯﺍﺭﺓ ﺍﻻﻟﻜﺘﺮﻭﻧﻲ‪.‬‬
‫‪ .٤‬ﺍﻟﺘﺰﺍﻡ ﻣﻄﺎﺑﻘﺔ ﺍﻟﻤﻨﺘﺠﺎﺕ ﻟﻠﻤﻮﺍﺻﻔﺎﺕ ﻭﺍﻟﻤﻘﺎﻳﻴﺲ ﺍﻟﻤﻌﺘﻤﺪﺓ ﺃﻭ ﺍﻟﻤﻮﺍﺻﻔﺎﺕ ﺍﻟﻤﺘﺒﻨﺎﺓ ﻣﻦ ﺍﻟﻬﻴﺌﺔ‬
‫ﺍﻟﺴﻌﻮﺩﻳﺔ ﻟﻠﻤﻮﺍﺻﻔﺎﺕ ﻭﺍﻟﻤﻘﺎﻳﻴﺲ‪.‬‬
‫‪ .٥‬ﺍﻻﻟﺘﺰﺍﻡ ﺑﻤﻮﺍﺩ ﺍﻟﻨﻈﺎﻡ ﺍﻟﻌﺎﻡ ﻟﻠﺒﻴﺌﺔ ﻭﻻﺋﺤﺘﻪ ﺍﻟﺘﻨﻔﻴﺬﻳﺔ ﻟﻠﻤﺤﺎﻓﻈﺔ ﻋﻠﻰ ﺍﻟﺒﻴﺌﺔ ﻣﻦ ﺍﻟﺘﻠﻮﺙ‪.‬‬
‫‪ .٦‬ﺍﻻﻟﺘﺰﺍﻡ ﺑﺎﻷﻧﻈﻤﺔ ﻭﺍﻟﺘﻌﻠﻴﻤﺎﺕ ﻭﻟﻮﺍﺋﺢ ﺍﻟﺴﻼﻣﺔ ﻭﺍﻷﻣﻦ ﺍﻟﺼﻨﺎﻋﻲ ﻭﺍﻟﺼﺤﺔ ﺍﻟﻌﺎﻣﺔ‪.‬‬
‫‪ .٧‬ﺍﻥ ﺗﻜﻮﻥ ﺣﺴﺎﺑﺎﺕ ﺍﻟﻤﺸﺮﻭﻉ ﺍﻟﺼﻨﺎﻋﻲ ﻣﻨﺘﻈﻤﺔ ﻭﻓﻘًﺎ ﻟﻸﺻﻮﻝ ﺍﻟﻤﺤﺎﺳﺒﻴﺔ ﻭ ﺍﻟﻘﻮﺍﻋﺪ ﺍﻟﻘﺎﻧﻮﻧﻴﺔ‬
‫ﺍﻟﻤﺮﻋﻴﺔ ﻭﺃﻥ ﻳﺰﻭﺩ ﺍﻟﻮﺯﺍﺭﺓ ﺑﺎﻟﻤﻴﺰﺍﻧﻴﺔ ﺍﻟﻌﻤﻮﻣﻴﺔ ﻣﺼﺎﺩﻕ ﻋﻠﻴﻬﺎ ﻣﻦ ﻣﺤﺎﺳﺐ ﻗﺎﻧﻮﻧﻲ ﻟﻜﻞ ﺳﻨﺔ ﻣﺎﻟﻴﺔ‪.‬‬
‫‪ .٨‬ﻋﺪﻡ ﺇﺳﺎﺀﺓ ﺍﺳﺘﻌﻤﺎﻝ ﺍﻟﻤﺰﺍﻳﺎ ﺍﻟﻤﻤﻨﻮﺣﺔ ﻟﻠﻤﺸﺮﻭﻉ‪.‬‬
‫‪ .٩‬ﺗﺰﻭﻳﺪ ﺍﻟﻮﺯﺍﺭﺓ ﺑﻤﺎ ﺗﻄﻠﺒﻪ ﻣﻦ ﺑﻴﺎﻧﺎﺕ ﻛﺎﻣﻠﺔ ﻭﺻﺤﻴﺤﺔ ﻋﻦ ﺍﻟﻤﺸﺮﻭﻉ‪.‬‬
‫‪ .١٠‬ﺍﻟﺴﻤﺎﺡ ﻟﻤﻮﻇﻔﻲ ﺍﻟﻮﺯﺍﺭﺓ ﺑﺪﺧﻮﻝ ﺍﻟﻤﺸﺮﻭﻉ ﺍﻟﺼﻨﺎﻋﻲ ﻭﺍﻹﻃﻼﻉ ﻋﻠﻰ ﺍﻟﺴﺠﻼﺕ ﻭﺍﻟﻤﺴﺘﻨﺪﺍﺕ‬
‫ﻭﺍﻟﺤﺴﺎﺑﺎﺕ ﻭﻣﺮﺍﻗﺒﺔ ﻋﻤﻠﻴﺔ ﺍﻹﻧﺘﺎﺝ ﻭﻏﻴﺮ ﺫﻟﻚ ﻣﻦ ﻧﺸﺎﻃﺎﺕ ﺍﻟﻤﺸﺮﻭﻉ‪.‬‬
‫‪ .١١‬ﻻﻳﺠﻮﺯ ﺇﻗﺎﻣﺔ ﻣﺸﺮﻭﻉ ﺻﻨﺎﻋﻲ ﺃﻭ ﺗﻮﺳﻌﺘﻪ ﺃﻭ ﺗﻄﻮﻳﺮﻩ ﺃﻭ ﺗﻐﻴﻴﺮ ﻣﻨﺘﺠﺎﺗﻪ ﺃﻭ ﺩﻣﺠﻪ ﺑﻤﺸﺮﻭﻉ ﺻﻨﺎﻋﻲ‬

‫‪www.mim.gov.sa‬‬
‫ﺭﻗﻢ ﺍﻟﺮﺧﺼﺔ‪21021043031 :‬‬
‫ﻣﺆﺳﺴﺔ ﻣﺎﺯﻥ ﻋﺒﺪ ﺍﻟﺴﻼﻡ ﺟﺪﻳﺪ ﻟﻠﺼﻴﺎﻧﺔ‬ ‫ﺍﻹﺳﻢ ﺍﻟﺘﺠﺎﺭﻱ‬
‫‪7008107315‬‬ ‫ﺍﻟﺮﻗﻢ ﺍﻟﻤﻮﺣﺪ ﻟﻠﻤﻨﺸﺂﺕ)‪(7‬‬ ‫‪4030393251‬‬ ‫ﺭﻗﻢ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ‬
‫ﺟﺪﺓ‬ ‫ﻣﻨﻄﻘﺔ ﻣﺰﺍﻭﻟﺔ ﺍﻟﻨﺸﺎﻁ‬ ‫‪1445-06-19‬‬ ‫ﺗﺎﺭﻳﺦ ﺍﻹﻧﺘﻬﺎﺀ‬ ‫‪1442-06-19‬‬ ‫ﺗﺎﺭﻳﺦ ﺍﻹﺻﺪﺍﺭ‬
‫ﺗﺮﻛﻴﺐ ﻭﺻﻴﺎﻧﺔ ﺃﺟﻬﺰﺓ ﻭﻣﻌﺪﺍﺕ ﺍﻹﻃﻔﺎﺀ‬ ‫ﺍﻟﻨﺸﺎﻁ ﺍﻟﻤﺮﺧﺺ‬

‫ﺗﺸﻬﺪ ﻭﺣﺪﺓ ﺍﻟﺘﺮﺍﺧﻴﺺ ﺍﻷﻣﻨﻴﺔ ﺍﻟﻤﺮﻛﺰﻳﺔ ﺑﺄﻥ ﺍﻟﻤﻨﺸﺄﺓ ﺍﻟﻤﻮﺿﺤﺔ ﺃﻋﻼﻩ ﻗﺪ ﺃﺳﺘﻮﻓﺖ ﻛﺎﻓﺔ ﺍﻹﺟﺮﺍﺀﺍﺕ ﻭﺍﻹﺷﺘﺮﺍﻃﺎﺕ ﺍﻟﻨﻈﺎﻣﻴﺔ ﻟﻤﺰﺍﻭﻟﺔ ﺍﻟﻨﺸﺎﻁ ﺍﻟﻤﻮﺿﺢ ﺃﻋﻼﻩ ﻭﻗﺪ ﺃﺻﺪﺭﺕ‬
‫ﻟﻬﺎ ﻫﺬﻩ ﺍﻟﺮﺧﺼﺔ ﻛﻤﻨﺸﺄﺓ ﻣﺼﺮﺡ ﻟﻬﺎ ﻟﻤﺰﺍﻭﻟﺔ ﺍﻟﻨﺸﺎﻁ ﺍﻟﻤﺬﻛﻮﺭ‪.‬‬

‫* ﻟﻠﺘﺤﻘﻖ ﻣﻦ ﺻﻼﺣﻴﺔ ﺍﻟﺮﺧ ﺼﺔ ﺍﻟﺮﺟﺎﺀ ﺍﻟﺪﺧﻮﻝ ﻋﻠﻰ ﻣﻮ ﻗﻊ ﻭﺣﺪﺓ ﺍﻟﺘﺮﺍﺧﻴﺺ ﺍﻻﻣﻨﻴﺔ ﺍﻟﻤﺮ ﻛﺰﻳﺔ ‪www.clu-moi.com.sa‬‬
‫* ﻳﺘﻄﻠﺐ ﻭﺟﻮﺩ ﺍﻟﻨﺸﺎﻁ ﻓﻲ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ ﺍﻟﻤﺬ ﻛﻮﺭ ﺃﻋﻼﻩ‪ ،‬ﻋﻠﻰ ﺍﻥ ﻳﻜﻮﻥ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ ﺳﺎﺭﻱ ﺍﻟﻤﻔﻌﻮﻝ‬
‫ﺭﻗﻢ ﺍﻟﺮﺧﺼﺔ‪20022041455 :‬‬
‫ﻣﺆﺳﺴﺔ ﻣﺎﺯﻥ ﻋﺒﺪ ﺍﻟﺴﻼﻡ ﺟﺪﻳﺪ ﻟﻸﻣﻦ ﻭﺍﻟﺴﻼﻣﺔ‬ ‫ﺍﻹﺳﻢ ﺍﻟﺘﺠﺎﺭﻱ‬
‫‪7008107372‬‬ ‫ﺍﻟﺮﻗﻢ ﺍﻟﻤﻮﺣﺪ ﻟﻠﻤﻨﺸﺂﺕ)‪(7‬‬ ‫‪4030393252‬‬ ‫ﺭﻗﻢ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ‬
‫ﺟﺪﺓ‬ ‫ﻣﻨﻄﻘﺔ ﻣﺰﺍﻭﻟﺔ ﺍﻟﻨﺸﺎﻁ‬ ‫‪1445-05-15‬‬ ‫ﺗﺎﺭﻳﺦ ﺍﻹﻧﺘﻬﺎﺀ‬ ‫‪1442-05-15‬‬ ‫ﺗﺎﺭﻳﺦ ﺍﻹﺻﺪﺍﺭ‬
‫ﺗﺮﻛﻴﺐ ﻭﺻﻴﺎﻧﺔ ﺃﺟﻬﺰﺓ ﻭﻣﻌﺪﺍﺕ ﺍﻹﻧﺬﺍﺭ ﻣﻦ ﺍﻟﺤﺮﻳﻖ‬ ‫ﺍﻟﻨﺸﺎﻁ ﺍﻟﻤﺮﺧﺺ‬

‫ﺗﺸﻬﺪ ﻭﺣﺪﺓ ﺍﻟﺘﺮﺍﺧﻴﺺ ﺍﻷﻣﻨﻴﺔ ﺍﻟﻤﺮﻛﺰﻳﺔ ﺑﺄﻥ ﺍﻟﻤﻨﺸﺄﺓ ﺍﻟﻤﻮﺿﺤﺔ ﺃﻋﻼﻩ ﻗﺪ ﺃﺳﺘﻮﻓﺖ ﻛﺎﻓﺔ ﺍﻹﺟﺮﺍﺀﺍﺕ ﻭﺍﻹﺷﺘﺮﺍﻃﺎﺕ ﺍﻟﻨﻈﺎﻣﻴﺔ ﻟﻤﺰﺍﻭﻟﺔ ﺍﻟﻨﺸﺎﻁ ﺍﻟﻤﻮﺿﺢ ﺃﻋﻼﻩ ﻭﻗﺪ ﺃﺻﺪﺭﺕ‬
‫ﻟﻬﺎ ﻫﺬﻩ ﺍﻟﺮﺧﺼﺔ ﻛﻤﻨﺸﺄﺓ ﻣﺼﺮﺡ ﻟﻬﺎ ﻟﻤﺰﺍﻭﻟﺔ ﺍﻟﻨﺸﺎﻁ ﺍﻟﻤﺬﻛﻮﺭ‪.‬‬

‫* ﻟﻠﺘﺤﻘﻖ ﻣﻦ ﺻﻼﺣﻴﺔ ﺍﻟﺮﺧ ﺼﺔ ﺍﻟﺮﺟﺎﺀ ﺍﻟﺪﺧﻮﻝ ﻋﻠﻰ ﻣﻮ ﻗﻊ ﻭﺣﺪﺓ ﺍﻟﺘﺮﺍﺧﻴﺺ ﺍﻻﻣﻨﻴﺔ ﺍﻟﻤﺮ ﻛﺰﻳﺔ ‪www.clu-moi.com.sa‬‬
‫* ﻳﺘﻄﻠﺐ ﻭﺟﻮﺩ ﺍﻟﻨﺸﺎﻁ ﻓﻲ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ ﺍﻟﻤﺬ ﻛﻮﺭ ﺃﻋﻼﻩ‪ ،‬ﻋﻠﻰ ﺍﻥ ﻳﻜﻮﻥ ﺍﻟﺴﺠﻞ ﺍﻟﺘﺠﺎﺭﻱ ﺳﺎﺭﻱ ﺍﻟﻤﻔﻌﻮﻝ‬
 ‫ﻣﺆﺳﺴﺔ ﻣﺎﺯﻥ ﻋﺒﺪ ﺍﻟﺴﻼﻡ ﺟﺪﻳﺪ ﻟﻸﻣﻦ ﻭﺍﻟﺴﻼﻣﺔ‬

‫‪1445/03/05‬‬ ‫‪1443/03/05‬‬ ‫‪42024005443‬‬

‫ﻣﺆﺳﺴﺔ ﻣﺎﺯﻥ ﻋﺒﺪ ﺍﻟﺴﻼﻡ ﺟﺪﻳﺪ ﻟﻸﻣﻦ ﻭﺍﻟﺴﻼﻣﺔ‬

‫‪4030393252‬‬

‫ﺗﺮﻛﻴﺐ ﻭﺻﻴﺎﻧﺔ ﺃﺟﻬﺰﺓ ﻭﻣﻌﺪﺍﺕ ﺍﻹﻧﺬﺍﺭ ﻣﻦ ﺍﻟﺤﺮﻳﻖ‬

‫ﺗﺮﻛﻴﺐ ﻭﺻﻴﺎﻧﺔ ﺃﺟﻬﺰﺓ ﻭﻣﻌﺪﺍﺕ ﺍﻹﻧﺬﺍﺭ ﻣﻦ ﺍﻟﺤﺮﻳﻖ‬

‫ﺑﻠﺪﻳﺔ ﺍﻟﻌﺰﻳﺰﻳﺔ‬ ‫ﺃﻣﺎﻧﺔ ﻣﺤﺎﻓﻈﺔ ﺟﺪﺓ‬

‫ﺍﻟﺘﻀﺎﻣﻦ ﺍﻟﻌﺮﺑﻲ‬ ‫ﺍﻟﺮﺣﺎﺏ‬

‫‪0‬‬ ‫‪2‬‬ ‫‪ 30‬ﻣﺘﺮ ﻣﺮﺑﻊ‬

‫ﻻ ﻳﺴﻤﺢ ﺑﻤﻤﺎﺭﺳﺔ ﺍﻟﻨﺸﺎﻁ ﺑﺪﻭﻥ ﺗﺮﺧﻴﺺ ﺃﻭ ﻣﻮﺍﻓﻘﺔ ﺭﺳﻤﻴﺔ ﻣﻦ ﺍﻟﺠﻬﺎﺕ ﺍﻟﺘﺎﻟﻴﺔ‪ :‬ﺍﻟﻬﻴﺌﺔ ﺍﻟﻌﻠﻴﺎ ﻟﻼﻣﻦ ﺍﻟﺼﻨﺎﻋﻲ‬
 ‫‪1440015646‬‬

‫‪1450/06/17‬‬ ‫‪1440/06/18‬‬ ‫‪1440/08/27‬‬ ‫‪7‬‬

‫رسم شعلة مكون من ثلث ألسنة من اللهب من السفل لونه أحمر ومن الوسط لونه أزرق ومن العلى لونه رمادي‬
‫دخاني محاطة باطار مكتوب عليه من العلى مافكو بالحرف النجليزية ومن السفل مكتوب مافكو باللغة العربية‬

‫المملكة العربية السعودية‬ ‫مصنع مازن عبدالسلم جديد لتصنيع معدات السلمة‬
‫السعودية ‪ -‬جدة ‪ -‬ص‪.‬ب ‪ - 031971‬الرمز البريدي ‪21418‬‬

‫آلت وعدد آلية‪ ،‬محركات ومكائن (عدا ما كان منها للمركبات البرية) ‪ ،‬قارنات آلية وعناصر نقل الحركة (عدا ما كان منها للمركبات البرية) ‪،‬‬
‫معدات زراعية (عدا ما يدار باليد) ‪ ،‬أجهزة تفقيس البيض؛ آلت بيع أوتوماتية‪، .‬‬
‫‪100171000147579‬‬

‫ﺗﺎرﻳﺦ اﻟﱰﺧﻴﺺ ‪ ١٤٣٩/٠٣/٢٢ :‬ﻫـ‬

‫اﻟﺮﻗﻢ اﳌﻤﻴﺰ ‪٣٠٠١١٨٧٢٤٥ :‬‬

‫ﺷﻬﺎدة ﺗﺴﺠﻴﻞ ﰲ ﴐﻳﺒﺔ اﻟﻘﻴﻤﺔ اﳌﻀﺎﻓﺔ‬

‫‪VAT registration certificate‬‬

‫ﺗﺸﻬﺪ اﻟﻬﻴﺌﺔ اﻟﻌﺎﻣﺔ ﻟﻠﺰﻛﺎة واﻟﺪﺧﻞ ﺑﺄن اﳌﻜﻠﻒ ‪ :‬ﻣﺼﻨﻊ ﻣﺎزن ﻋﺒﺪاﻟﺴﻼم ﺟﺪﻳﺪ ﻟﺘﺼﻨﻴﻊ ﻣﻌﺪات اﻟﺴﻼﻣﺔ‬
‫ﻣﺴﺠﻞ ﰲ ﴐﻳﺒﺔ اﻟﻘﻴﻤﺔ اﳌﻀﺎﻓﺔ ﺑﺘﺎرﻳﺦ ‪ ١٤٣٩/٠٣/٢٢ :‬ﻫـ ‪ ،‬وﺗﺤﻤﻞ اﻟﺮﻗﻢ اﻟﴬﻳﺒﻲ ‪٣٠٠١١٨٧٢٤٥٠٠٠٠٣ :‬‬

‫ﻋﻨﻮان اﳌﺮﻛﺰ اﻟﺮﺋﻴﴘ ‪:‬‬

‫اﳌﺪﻳﻨﺔ ‪ :‬ﺟﺪة اﻟﺤﻲ ‪ :‬ﺑﻨﻲ ﻣﺎﻟﻚ‬
‫ﺻﻨﺪوق اﻟﱪﻳﺪ ‪ :‬اﻟﺮﻣﺰ اﻟﱪﻳﺪي ‪٢٣٢٣٢ :‬‬
‫اﻟﻬﺎﺗﻒ ‪٠٠٩٦٦٥٠٦٦٦٧٥١٦ :‬‬

‫اﻟﻬﻴﺌﺔ اﻟﻌﺎﻣﺔ ﻟﻠﺰﻛﺎة واﻟﺪﺧﻞ‬

‫ﻫﺬه اﻟﻮﺛﻴﻘﺔ ﻣﺮﺳﻠﺔ ﻣﻦ اﻟﻨﻈﺎم اﻵﱄ وﻻ ﺗﺤﺘﺎج إﱃ ﺗﻮﻗﻴﻊ‬

 ®
Certificate of Registration
This is to certify that Quality Management System of
MAZEN ABDULSALAM JADID FACTORY FOR FIRE
SAFETY EQUIPMENT MANUFACTURING
INDUSTRIAL AREA -3 , JEDDAH , KINGDOM OF SAUDI ARABIA

is in accordance with the requirements of the following standard

ISO 9001:2015
(Quality Management System)

SCOPE

MANUFACTURING OF FIRE CABINET, DOORS , AUTOMATIC

FIRE SUPPRESSION SYSTEM

Certificate Number : SCK/01/MBS/23/96/1838

Initial
st
Registration Date : 12-Apr-2023
1 nd Surveillance Date : 12-Mar-2024
To verify certificate, visit at : 2 Surveillance Date : 12-Mar-2025
www.sckcerts.com Certificate Expiry Date : 11-Apr-2026
www.iafcertsearch.org

Issued by SCK Certifications Pvt. Ltd.

Director

Accredited
MSCB 244
Accreditation Board : 3060, Saturn Street, Suite 100, Brea, California 92821-1732, USA
This certificate remains the property of SCK and must be returned to SCK on Cancellation or Suspension of the certificate Validity of the certificate is subject to successful completion of surveillance audits.
Further clarification regarding the scope of this certificate and the applicability of standard may be obtained by consulting the Organisation on info@sckcerts.com
 Certificate of Product Approval
Certificate Number: 1038BDa Issue: 01

Mazen Abdulsalam Jadid Factory For

Manufacturing Safety Equipment
Industrial City No. 3
Jazan Road
Jeddah
Kingdom of Saudi Arabia

is certified by BRE Global Ltd. and is authorised to use the LPCB mark in association with the product(s) listed
in this certificate and appendix having complied with the requirement(s) of the standards as detailed below:

Products Standards
‘MAFCO’ Fire Hose Reels EN 671-1:2012
(Refer to attached appendix for details) Fixed firefighting systems. Hose systems. Hose reels
with semi-rigid hose

This certificate and appendix is maintained and held in force through regular surveillance activities

Joe Milton 25 May 2023 25 May 2023

Signed for BRE Global Ltd. Verifier Date of Issue Date of First Issue

This certificate and appendix remains the property of BRE Global Ltd. and is issued
subject to terms and conditions (for details visit www.redbooklive.com/terms).
To check the validity of this certificate and appendix please visit
www.redbooklive.com/check, scan the QR tag or contact us.
BRE Global Ltd, Watford, WD25 9XX
T: +44 (0)333 321 8811 E: enquiries@breglobal.com
LPCB is a Registered Trademark of the Building Research Establishment Ltd.

BF1315A Rev. 1.1 Page 1 of 2 © BRE Global Ltd, 2023

 Appendix to Certificate No: 1038BDa Issue: 01
XXXa
Mazen Abdulsalam Jadid Factory For Manufacturing Safety Equipment

‘MAFCO’ Fire Hose Reels to EN 671-1:2012

Hose Hose
LPCB Ref.
Product Name Description Nominal Maximum Nozzle type
No.
Bore (mm) Length (m)

Manual, swinging arm, Lever operated jet only or

MF300/S 25 30 1038BDa/02
cabinet or wall mounted rotary operated jet/spray

Automatic, swinging arm, Lever operated jet only or

MF600/S 25 30 1038BDa/04
cabinet or wall mounted rotary operated jet/spray

Manual, swinging pipe, Lever operated jet only or

MF9000/S 25 30 1038BDa/14
cabinet or wall mounted rotary operated jet/spray

This certificate and appendix is maintained and held in force through regular surveillance activities

Joe Milton 25 May 2023 25 May 2023

Signed for BRE Global Ltd. Verifier Date of Issue Date of First Issue

This certificate and appendix remains the property of BRE Global Ltd. and is issued
subject to terms and conditions (for details visit www.redbooklive.com/terms).
To check the validity of this certificate and appendix please visit
www.redbooklive.com/check, scan the QR tag or contact us.
BRE Global Ltd, Watford, WD25 9XX
T: +44 (0)333 321 8811 E: enquiries@breglobal.com
LPCB is a Registered Trademark of the Building Research Establishment Ltd.

BF1315A Rev. 1.1 Page 2 of 2 © BRE Global Ltd, 2023

‫ م‬3:56 2023/‫‏‬6/‫‏‬7 GSYX.R41085 - Swinging-type Fire Doors | UL Product iQ

Swinging-type Fire Doors

COMPANY

MAZEN ABDULSALAM JADID FACTORY FOR MANUFACTURING SAFETY EQUIPMENT

Industrial city no. 3 , Jazan road
Jeddah, Saudi Arabia

R41085

Swinging doors may be provided as follows:

Wood Steel
Hollow Covered Covered
Max Rating Opening Type Metal Composite Composite
Type Door Type Door Type Door

1 Hr Pair With Astragal X — —

3, 2, 1-1/2, 1 Hr Pair With Astragal X — —

Single Point Lock/Flush Bolts/Fire Exit Hardware

3, 2, 1-1/2, 1 Hr Single Swing X — —

3Hr Single Swing — — X

Trademark and/or tradename:

Last Updated on 2023-06-06

The appearance of a company's name or product in this database does not in itself assure that products so identified have been
manufactured under UL Solutions' Follow - Up Service. Only those products bearing the UL Mark should be considered to be
Certified and covered under UL Solutions' Follow - Up Service. Always look for the Mark on the product.

UL Solutions permits the reproduction of the material contained in Product iQ subject to the following conditions: 1. The Guide
Feedback

Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in
a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from Product iQ
with permission from UL Solutions" must appear adjacent to the extracted material. In addition, the reprinted material must
include a copyright notice in the following format: "©2023 UL LLC."

https://iq.ulprospector.com/en/profile?e=5892353 1/1
‫ م‬3:59 2023/‫‏‬6/‫‏‬7 GVTV7.R41086 - Fire Door and Fire Window Frames Certified for Canada | UL Product iQ

Fire Door and Fire Window Frames Certified for Canada

COMPANY

MAZEN ABDULSALAM JADID FACTORY FOR MANUFACTURING SAFETY EQUIPMENT

Industrial city no. 3 , Jazan road
Jeddah, Saudi Arabia

R41086

Door frames:

1 hour

3 hour

3 hour

Trademark and/or tradename:

Last Updated on 2023-06-06

The appearance of a company's name or product in this database does not in itself assure that products so identified have been
manufactured under UL Solutions' Follow - Up Service. Only those products bearing the UL Mark should be considered to be
Certified and covered under UL Solutions' Follow - Up Service. Always look for the Mark on the product.

UL Solutions permits the reproduction of the material contained in Product iQ subject to the following conditions: 1. The Guide
Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in
a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from Product iQ
with permission from UL Solutions" must appear adjacent to the extracted material. In addition, the reprinted material must
include a copyright notice in the following format: "©2023 UL LLC."

https://iq.ulprospector.com/en/profile?e=5892356 1/1
‫ م‬3:57 2023/‫‏‬6/‫‏‬7 GSYX7.R41085 - Swinging-type Fire Doors Certified for Canada | UL Product iQ

Swinging-type Fire Doors Certified for Canada

COMPANY

MAZEN ABDULSALAM JADID FACTORY FOR MANUFACTURING SAFETY EQUIPMENT

Industrial city no. 3 , Jazan road
Jeddah, Saudi Arabia

R41085

Swinging doors may be provided as follows:

Wood Steel
Hollow Covered Covered
Max Rating Opening Type Metal Composite Composite
Type Door Type Door Type Door

1 Hr Pair With Astragal X — —

3, 2, 1-1/2, 1 Hr Pair With Astragal X — —

Single Point Lock/Flush Bolts/Fire Exit Hardware

3, 2, 1-1/2, 1 Hr Single Swing X — —

3Hr Single Swing — — X

Trademark and/or tradename:

Last Updated on 2023-06-06

The appearance of a company's name or product in this database does not in itself assure that products so identified have been
manufactured under UL Solutions' Follow - Up Service. Only those products bearing the UL Mark should be considered to be
Certified and covered under UL Solutions' Follow - Up Service. Always look for the Mark on the product.

UL Solutions permits the reproduction of the material contained in Product iQ subject to the following conditions: 1. The Guide
Feedback

Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in
a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from Product iQ
with permission from UL Solutions" must appear adjacent to the extracted material. In addition, the reprinted material must
include a copyright notice in the following format: "©2023 UL LLC."

https://iq.ulprospector.com/en/profile?e=5892354 1/1
‫ م‬3:54 2023/‫‏‬6/‫‏‬7 GSZN.R41085 - Swinging-type Fire Doors, Positive-pressure Tested | UL Product iQ

Swinging-type Fire Doors, Positive-pressure Tested

COMPANY

MAZEN ABDULSALAM JADID FACTORY FOR MANUFACTURING SAFETY EQUIPMENT

Industrial city no. 3 , Jazan road
Jeddah, Saudi Arabia

R41085

Swinging doors may be provided as follows:

Min
Size Temp
ft- Max Size Rise
Max Door Opening in(mm) ft-in(mm) Latching Rating
Accessories
Model Rating Type Type Category W H W H Hardware [*] °F(°C)

MAFCO- 1 Hollow- Pair w/ A - - 7-9 8-0 Concealed Glazing, -

DSF-1H hour Metal Astragal (2362) (2438) Vertical Louver
(Steel Rod Exit,
Stiffened) Cylindrical,
Mortise,
Surface
Vertical
Rod Exit

MAFCO- 3 Hollow- Pair w/ A - - 7-9 8-0 Concealed Glazing, -

DSF-3H hour Metal Astragal (2362) (2438) Vertical Louver
(Steel Rod Exit,
Stiffened) Cylindrical,
Mortise,
Surface
Vertical
Rod Exit

2 Hollow- Pair w/ A - - 7-9 8-0 Concealed Glazing, -

hour Metal Astragal (2362) (2438) Vertical Louver
(Steel Rod Exit,
Feedback

Stiffened) Cylindrical,
Mortise,
Surface
Vertical
Rod Exit

https://iq.ulprospector.com/en/profile?e=5897300 1/3
‫ م‬3:54 2023/‫‏‬6/‫‏‬7 GSZN.R41085 - Swinging-type Fire Doors, Positive-pressure Tested | UL Product iQ

1-1/2 Hollow- Pair w/ A - - 7-9 8-0 Concealed Glazing, -

hour Metal Astragal (2362) (2438) Vertical Louver
(Steel Rod Exit,
Stiffened) Cylindrical,
Mortise,
Surface
Vertical
Rod Exit

1 Hollow- Pair w/ A - - 7-9 8-0 Concealed Glazing, -

hour Metal Astragal (2362) (2438) Vertical Louver
(Steel Rod Exit,
Stiffened) Cylindrical,
Mortise,
Surface
Vertical
Rod Exit

MAFCO- 3 Steel Single A - - 4-0 8-0 Electrically- Auxiliary -

P-3H hour Covered (1219) (2438) controlled Locks, Fire
Composite Single- Door
point, Viewer,
Mortise, Glazing,
Rim Exit, Louver
Three-
point
Locks and
Latches,
Two-point
Locks and
Latches

MAFCO- 3 Hollow- Single A - - 4-0 8-0 Cylindrical, Glazing, -

SSF-3H hour Metal (1219) (2438) Mortise, Louver
(Steel Rim Exit
Stiffened)

2 Hollow- Single A - - 4-0 8-0 Cylindrical, Glazing, -

hour Metal (1219) (2438) Mortise, Louver
(Steel Rim Exit
Stiffened)

1-1/2 Hollow- Single A - - 4-0 8-0 Cylindrical, Glazing, -

hour Metal (1219) (2438) Mortise, Louver
(Steel Rim Exit
Stiffened)

1 Hollow- Single A - - 4-0 8-0 Cylindrical, Glazing, -

Feedback

hour Metal (1219) (2438) Mortise, Louver

(Steel Rim Exit
Stiffened)

[*] - Additional information regarding accessories can be found under the Guide Card GSZN

https://iq.ulprospector.com/en/profile?e=5897300 2/3
‫ م‬3:54 2023/‫‏‬6/‫‏‬7 GSZN.R41085 - Swinging-type Fire Doors, Positive-pressure Tested | UL Product iQ

Trademark and/or Tradename:

The appearance of a company's name or product in this database does not in itself assure that products so identified have been
manufactured under UL Solutions' Follow - Up Service. Only those products bearing the UL Mark should be considered to be
Certified and covered under UL Solutions' Follow - Up Service. Always look for the Mark on the product.

UL Solutions permits the reproduction of the material contained in Product iQ subject to the following conditions: 1. The Guide
Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in
a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from Product iQ
with permission from UL Solutions" must appear adjacent to the extracted material. In addition, the reprinted material must
include a copyright notice in the following format: "©2023 UL LLC."

Feedback

https://iq.ulprospector.com/en/profile?e=5897300 3/3
‫ م‬3:58 2023/‫‏‬6/‫‏‬7 GVTV.R41086 - Fire Door and Fire Window Frames | UL Product iQ

Fire Door and Fire Window Frames

COMPANY

MAZEN ABDULSALAM JADID FACTORY FOR MANUFACTURING SAFETY EQUIPMENT

Industrial city no. 3 , Jazan road
Jeddah, Saudi Arabia

R41086

Door Frames for use as a component in fire door assemblies that meet the requirements of UL 10C, 1 hour (positive pressure): 1
hour

Door Frames for use as a component in fire door assemblies that meet the requirements of UL 10C, 3 hour (positive pressure): 3
hour

Door Frames for use as a component in fire door assemblies that meet the requirements of UL 10C, 3 hour (positive pressure): 3
hour

Trademark and/or tradename:

Last Updated on 2023-06-06

The appearance of a company's name or product in this database does not in itself assure that products so identified have been
manufactured under UL Solutions' Follow - Up Service. Only those products bearing the UL Mark should be considered to be
Certified and covered under UL Solutions' Follow - Up Service. Always look for the Mark on the product.

UL Solutions permits the reproduction of the material contained in Product iQ subject to the following conditions: 1. The Guide
Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in
a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from Product iQ
with permission from UL Solutions" must appear adjacent to the extracted material. In addition, the reprinted material must
include a copyright notice in the following format: "©2023 UL LLC."
Feedback

https://iq.ulprospector.com/en/profile?e=5892355 1/1
2022/10/17 上午9:39 GVEV.R15839 - Swinging Fire Door Closers | UL Product iQ

GVEV.R15839 - Swinging Fire Door Closers

Swinging Fire Door Closers

OUBAO SECURITY TECHNOLOGY CO LTD R15839
NO 809 BIXING ST
BIHU INDUSTRIAL PARK
LIANDU DISTRICT
LISHUI, ZHEJIANG 323006 China

For self-closing doors, surface-mounted type Model(s) 203, 3303, 500, 501, 5014BC, 5016BC, 502, 503, 5036BC, 503BC, 504,
504BC, 505, 505BC, 520, 523, 530, 534BC, 542, 542BC, 543, 543BC, 601, 602, 603, 604, 605, 632, 643, 654, 701, 7016, 702, 703,
703BC, 704, 704BC, 705, 705BC, 734BC, 9016, B4-94AW-II, OB03

For self-closing doors, without hold-open feature, concealed mounted type, size 2 Model(s) 103

Additionally Investigated to Standard UL 10C.

For self-closing doors, surface-mounted type Model(s) 3234BC, OB03a

Note - Above devices have been evaluated in accordance with Standard UL 10C designed to be used with swinging type fire
doors rated up to and including 3 hours.

Trademark and/or Tradename: , , ,

, , , , ,

, , , , , ,

, , , , , ,

, , , , ,

, ,

Last Updated on 2022-10-14

The appearance of a company's name or product in this database does not in itself assure that products so identified have been
manufactured under UL Solutions' Follow - Up Service. Only those products bearing the UL Mark should be considered to be
Certified and covered under UL Solutions' Follow - Up Service. Always look for the Mark on the product.

UL Solutions permits the reproduction of the material contained in Product iQ subject to the following conditions: 1. The Guide
Information, Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a
non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from Product iQ with
permission from UL Solutions" must appear adjacent to the extracted material. In addition, the reprinted material must include a
copyright notice in the following format: "©2022 UL LLC."

https://iq.ulprospector.com/en/profile?e=42929 1/1
 *ÿ2ÿ*29 ÿÿ 983192ÿ18892ÿ6ÿ692 /.ÿ
;ÿÿ-*"!8  ! "# - ! "./

0123456ÿ018921 3ÿ ÿÿ 983192ÿ18892ÿ6ÿ692 ÿ

  !ÿÿ  "#ÿ"$   "%

"#ÿ&  "#ÿ!* +
346'43ÿ86ÿ 983192ÿ"'43(816'ÿ3)348   "%
, !ÿ!* +
- ! "./
3ÿ ÿÿ 983192ÿ18892ÿ6ÿ692
,6 ÿ0123456ÿ018921ÿÿ
6 *ÿ2ÿ*29ÿÿ34ÿ39ÿ-641'<
(ÿ012 ÿ#(19'6ÿ9994ÿÿ ÿ09ÿ63===2
3'8 344956ÿ1ÿ3833ÿ77ÿ7ÿ ÿÿ08 ÿ9/2
8984 !:

ÿ 8
>??@ABCDEÿGHÿIAJCDK
DALMNCIJHEÿLAIOP@NPIQÿRMGSPJTÿMIDC@ÿG??SPLGUSCÿVWX>ÿ@CRMP@CNCIJHÿJAÿUCÿHMUNPJJCDÿM?AIÿDCSPBC@T
YPIDÿ@CQG@DHE
ZPJGSP[ÿZPSCH\Aÿ
X]ÿ^ÿ_]ÿ
]AUPSCKÿ`abbÿcbÿadeÿfcgbÿ
BPJGSP[hBPSCH\AiGCLANhLANÿ
>j_k]ÿ>@GUPGÿlJDhÿ_Ahÿ
mGnMIPTGÿmAnC@HEÿoAMJpÿmAnC@Eÿ]CqqGIPICÿOSAA@Eÿ
YPIQÿWGpGDÿrAGDÿ
Xhkhÿsktÿcfueaÿ
rPTGDpÿddvdvEÿYPIQDANÿAOÿoGMDPÿ>@GUPGÿ
GCLANhLAN
ÿ
ÿ
ÿ
ÿ
ÿ
ÿ
ÿ
ÿ
ÿ
ÿ
ÿ
ÿ
ÿ
ÿ
ÿ

12345ÿ7ÿ89ÿ9ÿ
5ÿÿÿ8ÿ8ÿÿÿ
35ÿ!"9#$%&ÿ!"'9"(ÿ
)*5ÿ8+, -ÿ89, $&.-/ÿ89-0"1ÿ802"99/ÿ3.2"1&ÿ4 5 0$/ÿ74 ÿ89ÿ9/ÿ&+ ,, -ÿ89ÿ 1 /ÿ ((-ÿ896 ,"/ÿ7 0#1ÿ490%#ÿ
89:;ÿ=>4? 25ÿ7@A78BCAÿ
>?D*5ÿ8ÿAÿ '#0"9ÿ.E,"''9ÿF&0ÿ8550&G9ÿ
ÿ
HIJKÿLMMN
OMIJPIÿQRSTÿJUUJVWITÿXJUIKRJMÿYZ[\RUUJMÿQ]KÿKI^RI_ÿJSTÿJ``K]^JMaÿÿ
bcdeÿgceÿhihjjikilmnolpqrlstuliiiivwÿmxyeiiÿlÿoczxÿp{|}~xÿ€cÿ‚}xÿƒ{xÿn„zx
ÿ
†IPUÿ‡IˆJKTPNÿ
‡ITÿYIJÿ‰SUIKSJUR]SJMÿ
Material Submittal Form

Project Name Royal Commission for Al-Ula Project Number PR2553

Material
Contractor Red Sea International 00083
Submittal No.

Contract No. Date 16 September 2021

Approved
To the Engineer AECOM Subcontractor Gulf Seas Port Services Co.
(as applicable)
Material Description As per
Hose Cabinet for Fire Water System specification
One item only per
Doc# 60611090-RSH-CIV-MAT-000034_00
Form (system) Alternative
60611090-RSH-MEC-SHD-510001_00 BOQ
Drawing Reference
60611090-RSH-MEC-SHD-500003_00 Reference No.
Specification Standards, BS
NFPA
Reference DIN

Manufacturer/Supplier
Locally
Company Name MAFCO Yes
Manufactured

Address Industrial Area – 3, Jeddah

Other details

Local Agent

Programme date Expected date

material required on TBD of arrival on September 2021
site site
Contractor’s Name Bushra AlGhamdi (Red Sea International) Date 16 September 2021

Signature

Design Consultant comments

Design Consultant’s
Date
Name

Signature

Doc. No. 60611090-RSH-CIV-MAT-000034 Rev.00 Page 1 of 10

Engineer’s comments

Exception as noted revise

No exception taken Revise and resubmit
Status Code and resubmit for record
Rejected Review not required Issued for Construction
Engineer’s
Date
Name

Signature

Received by Contractor
Name Date

Signature

All documents must be stamped and dated on submission

Doc. No. 60611090-RSH-CIV-MAT-000034 Rev.00 Page 2 of 10

 RED SEA INTERNATIONAL COMPANY

ROYAL COMMISSION FOR AL-ULA

Material Submittal

CLIENT ROYAL COMMISSION

PMC AECOM
CONTRACTOR RED SEA INTERNATIONAL COMPANY, JUBAIL, KSA
CONTRACT NO.
PROJECT ROYAL COMMISSION FOR AL-ULA
RSI WORK ORDER 90-0521-0054-00

DOCUMENT TITLE:

Hose Cabinet for Fire Water System

Size: 1700 x 800 x 310
- 2.5" Synthetic Hose reel 30 m Long 3 Pcs
- 2.5" Nozzle 3 Pcs

SUPPLIER/MANUFACTURER:
MAFCO
Industrial Area – 3, Jeddah

DOCUMENT HISTORY

REV.CODE DESCRIPTION OF CHANGES PURPOSE OF ISSUE DATE

00 First Issue Issued for Approval 16 September 2021

Doc. No. 60611090-RSH-CIV-MAT-000034 Rev.00 Page 3 of 10

 We begin develop from beyond others knowledge

MAZEN JADID FACTORY was started on 2003 in Kingdom of Saudi Arabia

as a fire & safety and fire fighting manufacturing Company. MAFCO is involved in
manufacture, design, supply, installation, testing & commissioning in various high
quality fire fighting equipment’s.

MAFCO provides quality of fire

protection systems. We have
professional engineers and
specialized technicians team for fire
protection system to Protect your
life and your investment. We
can offer wide range of design
solution in the field of fire
systems, fire alarms, addressable emergency systems, security systems.

Doc. No. 60611090-RSH-CIV-MAT-000034 Rev.00 Page 4 of 10

 MAFCO is one of the leading factory in fire fighting and industrial safety
equipment. We provide the latest Technology and equipment allowing us to give our
customers the best services possible. We also do a follow up on all clients to ensure
that all equipment supplied is efficiently running and serviced on time. We have
grown out of the need of ensuring safety and professional guidance to the public for
safer and proper usage of all fire and industrial safety equipment.

OUR MISSION

It’s the policy of the company to provide customers with products and services which
achieve and sustain the highest possible quality standards. This statement is the basis
of our management philosophy and reflects the commitment of every individual
within the organization.

OUR VISION

Excel in what we do and build a safe and secure environment for our community.

OUR DISTINCTIVE QUALITIES

Standard Quality

Affordable products.

Unparalleled customer service.

On time delivery

Doc. No. 60611090-RSH-CIV-MAT-000034 Rev.00 Page 5 of 10

 310
800

800

MAFCO

1700
1700

‫قيرحصقافطا قودنص‬
FIRE HOSE CABINET

All‫ق‬Dimensions‫ق‬are‫ق‬in‫ق‬mm
unless‫ق‬otherwise‫ق‬mentioned. FIRE‫ق‬HYDRANT‫ق‬CABINET.
Materials‫ق‬:
Size‫ق‬:‫ق‬1700‫ق‬x‫ق‬800‫ق‬x‫ق‬310
Cold‫ق‬Rolled‫ق‬Steel‫ق‬Type.‫ق‬GI‫ق‬steel‫ق‬with‫ق‬Zinc‫ق‬Phosphate.
Steel‫ق‬Thickness‫ق‬1mm.Door‫ق‬with‫ق‬Chrome‫ق‬Plated‫ق‬Lock. 2.5"‫ق‬Synthetic‫ق‬Hose‫ق‬reel‫ق‬30m‫ق‬Long‫ق‬-‫ق‬3‫ق‬Pcs
Door‫ق‬fitted‫ق‬with‫ق‬welded‫ق‬Hinges
2.5"‫ق‬Nozzle‫ق‬-‫ق‬3‫ق‬Pcs
Red‫ق‬color‫ق‬Powder‫ق‬coated‫ق‬body(Full).with‫ق‬textured‫ق‬powder‫ق‬RAL‫ق‬3020.
REV‫ق‬NO DATE DESCRIPTION APPROVED
BY
A F C O
M
MAZEN A.JADID FACTORY FIRE‫ق‬HYDRANT‫ق‬CABINET
FOR‫ق‬SAFETY‫ق‬EQUIPMENTS‫ق‬MFG.‫ق‬CO
JEDDAH
KINGDOM‫ق‬OF‫ق‬SAUDI‫ق‬ARABIA

Doc. No. 60611090-RSH-CIV-MAT-000034 Rev.00 Page 7 of 10

 RED SEA INTERNATIONAL COMPANY

ROYAL COMMISSION FOR AL-ULA

Material Submittal

REFERENCE DRAWINGS

Doc. No. 60611090-RSH-CIV-MAT-000034 Rev.00 Page 8 of 10

 FORM: F-OP-22 REV: 8 DATE: 16-09-2020

B
A
B A

A
B

A
A A
SECTION B

SECTION A

PLAN

REV. NO. DESCRIPTION DATE BY

00 ISSUED FOR CONSTRUCTION 15JUL2021 TALHA

B WORK ORDER NO.: 90-0521-0054

CLIENT NAME: ROYAL COMMISSION AL ULA (RCU)

LOCATION: AL ULA

MODEL NUMBER: RSS-2-18706-A

DRAWING TITLE:
FIRE HYDRANT w/ HOSE CABINET DETAILS
150-MAN FILM ACCOMMODATION CAMP
CONFIDENTIALITY:
Your Company shall not use any Confidential Information in
anyway other than for the purpose of your project proposal, nor
disclosure of any confidential information to any third parties
without Red Sea International's prior written consent.
DRAWN BY: AGB
CHECKED BY: ATD
APPROVED BY: NKHIDM
DATE: 15 JULY 2021
SCALE: N.T.S. SIZE: A3

DOC. NO.: 60611090-RSH-MEC-SHD-510001 REV.: 00

SHEET NO.: 001

Doc. No. 60611090-RSH-CIV-MAT-000034 Rev.00 Page 9 of 10

Doc. No. 60611090-RSH-CIV-MAT-000034 Rev.00 Page 10 of 10
 Fire Exit Doors
Technical details;
With Panic Atack handle
The fire proof term 120 Min.
Steel Thickness:Case 1.2mm leaf 1+1mm
Standart door size:98*210*20*5.5 cm
With coating cold-rolled steel door leaf + high grade
anti-fire filling
fireproof seal (2 pieces)
Plus fireproofing quality hinges, locks, handles, install-
ing bolts , plug pin.
nside filling: fireproof material board: anti-fire fills

YK-01 Fire Exit Doors

Technical details;
With Panic Atack handle
The fire proof term 120 Min.
Steel Thickness:Case 1.2mm leaf 1+1mm
Standart door size:98*210*20*5.5 cm
With coating cold-rolled steel door leaf + high grade
anti-fire filling
fireproof seal (2 pieces)
Plus fireproofing quality hinges, locks, handles, install-
ing bolts , plug pin.
nside filling: fireproof material board: anti-fire fills

YK-02 Fire Exit Doors

2
 Fire Exit Doors
Technical details;
With Panic Atack handle
The fire proof term 120 Min.
Steel Thickness:Case 1.2mm leaf 1+1mm
Standart door size:98*210*20*5.5 cm
With coating cold-rolled steel door leaf + high grade
anti-fire filling
fireproof seal (2 pieces)
Plus fireproofing quality hinges, locks, handles, install-
ing bolts , plug pin.
nside filling: fireproof material board: anti-fire fills

YK-03 Fire Exit Doors

Technical details;
With Panic Atack handle
The fire proof term 120 Min.
Steel Thickness:Case 1.2mm leaf 1+1mm
Standart door size:98*210*20*5.5 cm
With coating cold-rolled steel door leaf + high grade
anti-fire filling
fireproof seal (2 pieces)
Plus fireproofing quality hinges, locks, handles, install-
ing bolts , plug pin.
nside filling: fireproof material board: anti-fire fills

YK-04 Fire Exit Doors

3
 Fire Exit Doors
Technical details;
With Panic Atack handle
The fire proof term 120 Min.
Steel Thickness:Case 1.2mm leaf 1+1mm
Standart door size:98*210*20*5.5 cm
With coating cold-rolled steel door leaf + high grade
anti-fire filling
fireproof seal (2 pieces)
Plus fireproofing quality hinges, locks, handles, install-
ing bolts , plug pin.
nside filling: fireproof material board: anti-fire fills

YK-05 Fire Exit Doors

Technical details;
With Panic Atack handle
The fire proof term 120 Min.
Steel Thickness:Case 1.2mm leaf 1+1mm
Standart door size:98*210*20*5.5 cm
With coating cold-rolled steel door leaf + high grade
anti-fire filling
fireproof seal (2 pieces)
Plus fireproofing quality hinges, locks, handles, install-
ing bolts , plug pin.
nside filling: fireproof material board: anti-fire fills

YK-06 Fire Exit Doors

4
 Fire Exit Doors

YK-07 Fire Exit Doors YK-09 Fire Exit Doors YK-11 Fire Exit Doors

YK-08 Fire Exit Doors YK-10 Fire Exit Doors YK-12 Fire Exit Doors
5
 Fire Exit Doors

YK-13 Fire Exit Doors YK-14 Fire Exit Doors YK-15 Fire Exit Doors

YK-16 Fire Exit Doors YK-17 Fire Exit Doors

6
Fire Exit Doors

Technical details;
With Panic Atack handle
The fire proof term 120 Min.
Steel Thickness:Case 1.2mm leaf 1+1mm
With coating cold-rolled steel door leaf + high
grade anti-fire filling
fireproof seal (2 pieces)
Plus fireproofing quality hinges, locks, handles,
installing bolts , plug pin.
nside filling: fireproof material board: anti-fire fills

YK-18 Fire Exit Doors

7
MAZENA.JADID FACTORY
‫ﻣﺻﻧﻊ ﻣﺎﺯﻥ ﻋﺑﺩ ﺍﻟﺳﻼﻡ ﺟﺩﻳﺩ‬
For Safety Equipment’s Manufacturing.
Industrial Area – 3, Jeddah
Kingdom of Saudi Arabia.
Email : mafco2000@hotmail.com
 Mazen Jadid Factory provides a wide range of fire pump sets with different capacity
range under the brand name of “MAFCO”. We have an expertise of experienced
engineers and technician team for design each pump sets. Each pump sets are
completely tested by our quality control department.

MAFCO supplies with different capacity range

vary from 50 GPM to 1500 GPM capacities.
However, MAFCO has ability to manufacture
larger pump capacities as per customer’s request.
We have Standard of fire pump under the SASO
and NFPA standard requirement (depending
upon Saudi civil defense requirement),
We can design and supply the fire pump
depending upon customer requirement.
Also we can supply standard imported other
brands fire pumps.

Mob : 00966 506667516 Email : mafco2000@hotmail.com

 MAFCO supplies special vertical tuebine fire pump sets with different
capacity. We have an expertise of experienced engineers and technician team for design
each pump sets. Each pump sets are completely tested by our quality control
department.

MAFCO supplies with different capacity range vary

from 50 GPM to 1500 GPM capacities. However,
MAFCO has ability to supply larger pump capacities
as per customer’s request.

Mob : 00966 506667516 Email : mafco2000@hotmail.com

MAFCO supplies Diesel Jockey (DJ) Series fire fighting pumps from 50 GPM to 1500 GPM
capacities. This series pumps are having main driven diesel engines and jockey pumps.
MAF DJ series pumps comes with base frames, pressure switch, control panel and all other
require accessories. However, MAFCO has ability to supply larger pump capacities as per
customer’s request.

DIESEL JOCKEY PRESSURE

MODEL OTHERS
(HP) (HP) @ BAR
MAF 50 DJ 5 - 10 3 6 220/380 V
MAF 100 DJ 10 - 12 3 6 220/380 V
MAF 120 DJ 12 3 6 220/380 V
MAF 120 DJ 20 - 25 3 7 220/380 V
MAF 150 DJ 25 - 27 3 7 220/380 V
MAF 250 DJ 27 3 7 220/380 V

MAF 350 DJ 39 4 7 220/380 V

MAF 500 DJ 58 5.5 7-8 220/380 V
MAF 750 DJ 75 7.5 7-8 220/380 V

MAF 1000 DJ 98 7.5 7-8 220/380 V

Mob : 00966 506667516 Email : mafco2000@hotmail.com

 MAFCO supplies Diesel Jockey Electrical (DJE) Series fire fighting pumps from 50 GPM to
1500 GPM capacities. This series pumps are having main driven diesel engines, Electrical
Motors & jockey pumps. MAF DJE series pumps comes with base frames, pressure switch,
control panel and all other require accessories. However, MAFCO has ability to supply
larger pump capacities as per customer’s request.

ELECTRIC
DIESEL JOCKEY PRESSURE
MODEL MOTOR OTHERS
(HP) (HP) @ BAR
(HP)
MAF 50
5 - 10 5 3 6 220/380 V
DJE
MAF 100
10 - 12 10 3 6 220/380 V
DJE
MAF 120
12 10-12 3 6 220/380 V
DJE
MAF 120
20 - 25 15 3 7 220/380 V
DJE
MAF 150
25 - 27 25 3 7 220/380 V
DJE
MAF 250
27 25 3 7 220/380 V
DJE
MAF 350
39 30 4 7 220/380 V
DJE
MAF 500
58 50 5.5 7-8 220/380 V
DJE
MAF 750
75 75 7.5 7-8 220/380 V
DJE
MAF
98 100 7.5 7-8 220/380 V
1000 DJE

Mob : 00966 506667516 Email : mafco2000@hotmail.com

FIRE HOSE CABINET ‫ﺻﻨــﺪﻭﻕ ﺍﻁﻔــﺎء‬
‫ﺣــﺮﻳــﻖ‬

For Safety and Fire Fighting Equipment’s

Fire Hose Cabinet, Fire Doors and Fire Pumps
Email : mafco2000@hotmail.com
Mazen A.Jadid Factory are manufacture FIRE HOSE CABINET with
different models in Recessed and surface wall mounted types. MAFCO Cabinet
are sizes from 0.9mm to 2mm thickness cold rolled steel sheet or stainless steel
sheet. The cabinets are fabricated with MIG welding process.

 The folded edges are curled to

assure the safe handling.

 Cold rolled sheets are finished fully

painted with RED color.

 Stainless steel sheets are finished

with either Hairline, Mirror or

FEATURES
Cabinets are available in recessed and surface mounted types in both sheets.

Door lock for cabinet is either bright chrome plated or round handle cam

latch. Hose reels are hydrostatically tested to required pressure for leaks

1” dia, 30 m long red colour rubber hose reel with nozzle.

Different types of cabinet doors (without glass, with glass and wired glass)

Mob : 00966 506667516 Email : mafco2000@hotmail.com

MF 300 MAFCO Provides surface mounted type fire hose cabinet

SERIES with steel and stainless steel materials under the model

MF 300. Size of the cabinet 750 x 750 x 220 mm. Steel

Thickness from 0.9 to 2m. Cold Rolled Steel Type. GI steel

with Zinc Phosphate. The complete cabinet are painted with

Red Color Powder coating. Good finishing and rust

protection. Door with Chrome Plated or plastic Lock. Inside

the cabinet with MAFCO Rubber Hose of 1” size, 30meter

long.

Available in manual or automatic models.

Available in different sizes and design as per requirements.

HEIGHT WIDTH DEPTH

MODEL
(H) (W) (D)
MF 300 750 750 220

MF 300S 750 750 220

MF 300A 750 750 220

MF 300AS 750 750 220

ALL DIMENSIONS ARE IN MM

Mob : 00966 506667516 Email : mafco2000@hotmail.com

 MAFCO Provides Recessed Type Steel & Stainless Steel fire
MF 305
hose cabinet under the model MF 300S.
SERIES
Size of the cabinet 810 x 810 x 230 mm. Cabinet body Steel

Thickness from 0.9 to 2m. Cold Rolled Steel Type. GI steel

with Zinc Phosphate. Cabinet outer frame stainless steel 304

Hair line finished 1 - 2 mm. The complete cabinet body are

painted with Red / white Color Powder coating. Good

finishing and rust protection. Door with Chrome Plated Lock

or plastic lock. Inside the cabinet with MAFCO Rubber Hose

of 1” 30meter long. Available in manual or automatic

models.

HEIGHT WIDTH DEPTH

MODEL
(H) (W) (D)
MF 305 810 810 230

MF 305S 810 810 230

MF 305A 810 810 230

MF 305AS 810 810 230

ALL DIMENSIONS ARE IN MM

Mob : 00966 506667516 Email : mafco2000@hotmail.com

 MAFCO Provides Surface Mounted or Recessed Type Steel &

Stainless Steel Double Door fire hose cabinet under the model

MF 600, 600S, 605, 605S.

MF 600 / 605 Size of the cabinet shown below table. Cabinet body Steel

SERIES Thickness from 0.9 to 2m. Cold Rolled Steel Type. GI steel with

Zinc Phosphate. Cabinet outer frame stainless steel 304 Hair line

finished 1 - 2 mm. The complete cabinet body are painted with

Red / white Color Powder coating. Good finishing and rust

protection. Door with Chrome Plated Lock or plastic lock. Inside

the cabinet with MAFCO Rubber Hose of 1” 30meter long.

Available in manual or automatic models.

HEIGHT WIDTH DEPTH

MODEL
(H) (W) (D)
MF 600 1110 860 230

MF 600S 1110 860 230

MF 605 1110 860 230

MF 605S 1110 860 230

Mob : 00966 506667516 Email : mafco2000@hotmail.com

 MAFCO Provides Foam/Water Fire Cabinet under model MF
MF 9000
9000. Size of the cabinet 1120 x 700 x 310 mm.
SERIES
Cabinet body Steel Thickness from 0.9 to 2m. Cold Rolled Steel

Type. GI steel with Zinc Phosphate. The complete cabinet body

are painted with Red Color Powder coating. Good finishing and

rust protection. Door with Stainless Steel Chrome Plated Lock.

Inside the cabinet with MAFCO synthetic Hose of 1.5” size,

30meter long. 2 Pairs of 20 liters 3% AFFF foam.

2” brace control gate valve.

2” brace foam mixers with along this Foam/Water Cabinets.

Available in different sizes and design as per requirements.

Mob : 00966 506667516 Email : mafco2000@hotmail.com

 Mazen Jadid Factory manufacture FIRE EXTINGUISHER CABINET
with different models in Recessed and surface wall mounted types. Cabinet
materials are sizes 1.2mm thickness cold rolled steel sheet or stainless steel
sheet. The cabinets are fabricated with MIG welding process.

 The folded edges are curled to

assure the safe handling.

 Cold rolled sheets are finished

fully painted with RED color.

 Stainless steel sheets are finished

with either Hairline, Mirror or
Brush.

FEATURES
Cabinets are available in recessed and surface mounted types in both sheets.

Door lock for cabinet is Push Button Type.

Different types of cabinet doors (without glass, with glass and wired glass)

Mob : 00966 506667516 Email : mafco2000@hotmail.com

• SURFACE TYPE

• SEMI-RECESSED TYPE

• RECESSED TYPE

Available in different sizes, models Fire Extinguisher Cabinet Size : 650 x 350
Surface mounted Type. Fully Steel / Stainless
steel body door type for 6kg Powder extinguisher.
and design as per requirements.

Fire Extinguisher Cabinet Size : 650 x 350 Fire Extinguisher Cabinet Size : 650 x 350
Surface mounted Type. Fully glass door type. Recessed Type. Fully Steel / Stainless steel body
Steel / Stainless steel body for 6kg Powder door type for 6kg Powder extinguisher.
extinguisher.

Mob : 00966 506667516 Email : mafco2000@hotmail.com

 MAFCO Provides Foam/Water Fire Cabinet under model MF
MF 9000
9000. Size of the cabinet 1120 x 700 x 310 mm.
SERIES
Cabinet body Steel Thickness from 0.9 to 2m. Cold Rolled Steel

Type. GI steel with Zinc Phosphate. The complete cabinet body

are painted with Red Color Powder coating. Good finishing and

rust protection. Door with Stainless Steel Chrome Plated Lock.

Inside the cabinet with MAFCO synthetic Hose of 1.5” size,

30meter long. 2 Pairs of 20 liters 3% AFFF foam.

2” brace control gate valve.

2” brace foam mixers with along this Foam/Water Cabinets.

Available in different sizes and design as per requirements.

Mob : 00966 506667516 Email : mafco2000@hotmail.com

 MAFCO Provides Recessed Type Steel & Stainless Steel fire
MF 305
hose cabinet under the model MF 300S.
SERIES
Size of the cabinet 810 x 810 x 230 mm. Cabinet body Steel

Thickness from 0.9 to 2m. Cold Rolled Steel Type. GI steel

with Zinc Phosphate. Cabinet outer frame stainless steel 304

Hair line finished 1 - 2 mm. The complete cabinet body are

painted with Red / white Color Powder coating. Good

finishing and rust protection. Door with Chrome Plated Lock

or plastic lock. Inside the cabinet with MAFCO Rubber Hose

of 1” 30meter long. Available in manual or automatic

models.

HEIGHT WIDTH DEPTH

MODEL
(H) (W) (D)
MF 305 810 810 230

MF 305S 810 810 230

MF 305A 810 810 230

MF 305AS 810 810 230

ALL DIMENSIONS ARE IN MM

Mob : 00966 506667516 Email : mafco2000@hotmail.com

 MAFCO Provides Surface Mounted or Recessed Type Steel &

Stainless Steel Double Door fire hose cabinet under the model

MF 600, 600S, 605, 605S.

MF 600 / 605 Size of the cabinet shown below table. Cabinet body Steel

SERIES Thickness from 0.9 to 2m. Cold Rolled Steel Type. GI steel with

Zinc Phosphate. Cabinet outer frame stainless steel 304 Hair line

finished 1 - 2 mm. The complete cabinet body are painted with

Red / white Color Powder coating. Good finishing and rust

protection. Door with Chrome Plated Lock or plastic lock. Inside

the cabinet with MAFCO Rubber Hose of 1” 30meter long.

Available in manual or automatic models.

HEIGHT WIDTH DEPTH

MODEL
(H) (W) (D)
MF 600 1110 860 230

MF 600S 1110 860 230

MF 605 1110 860 230

MF 605S 1110 860 230

Mob : 00966 506667516 Email : mafco2000@hotmail.com

 720
220
570
I
50
1:2

100
4- 12

270
I

II

2-5
150
750
600

80
30

200 50

10
Technology Requirement:

55
1.1.0mm galvanized sheet body&door.
II 2.Red polyester powder coated finish.
19.5 3.Stainless steel paddle latch round lock.
III 1:3
4.Round bar hinges.
5.4x Φ10mm drainage holes at the bottom of the cabinet.

Surface Mounted Fire Hose Reel Cabinet Approve

Name
,720x750x220
Surface Wang Liu
Material galvanized sheet 1.0mm RAL3020 Design
50 Colour 2022.09.27
III Drawing Unit mm Wang Liu
Draw
45°

1:3 No. Proportion 1:8 2022.09.27

45°

MAFCO FIRE HOSE CABINET Revision A

NO. Original Size Modified Revisor Auditor Date
 FIRE EXTINGUISHER CABINET
‫ﺻﻨﺪﻭﻕ ﻳﺤﺘﻮﻱ ﻋﻠﻰ ﻁﻔﺎﻳﺔ ﺣﺮﻳﻖ‬

MAZENA.JADID FACTORY
‫ﻣﺻﻧﻊ ﻣﺎﺯﻥ ﻋﺑﺩ ﺍﻟﺳﻼﻡ ﺟﺩﻳﺩ‬
For Safety Equipment’s Manufacturing.
Industrial Area – 3, Jeddah
Kingdom of Saudi Arabia.
Mob : 00966 50 666 7516
Email : mafco2000@hotmail.com
 Mazen Jadid Factory manufacture FIRE EXTINGUISHER CABINET
with different models in Recessed and surface wall mounted types. Cabinet
materials are sizes 1.2mm thickness cold rolled steel sheet or stainless steel
sheet. The cabinets are fabricated with MIG welding process.

 The folded edges are curled to

assure the safe handling.

 Cold rolled sheets are finished

fully painted with RED color.

 Stainless steel sheets are finished

with either Hairline, Mirror or
Brush.

FEATURES
Cabinets are available in recessed and surface mounted types in both sheets.

Door lock for cabinet is Push Button Type.

Different types of cabinet doors (without glass, with glass and wired glass)

Mob : 00966 506667516 Email : mafco2000@hotmail.com

 • SURFACE TYPE

• SEMI-RECESSED TYPE

• RECESSED TYPE
Fire Extinguisher Cabinet Size : 650 x 350
Surface mounted Type. Fully Steel / Stainless
Available in different sizes, models steel body door type for 6kg Powder
extinguisher.

and design as per requirements.

Fire Extinguisher Cabinet Size : 650 x 350 Fire Extinguisher Cabinet Size : 650 x 350
Surface mounted Type. Fully glass door type. Recessed Type. Fully Steel / Stainless steel body
Steel / Stainless steel body for 6kg Powder door type for 6kg Powder extinguisher.
extinguisher.

Mob : 00966 506667516 Email : mafco2000@hotmail.com

 1050
30
30 30
30
30 225 725

MAFCO
800 740800
Double Door Fire Hose Cabinet. ‫ص ندوق اطف اء ح ريق‬
FIRE HOSE CABINET
Steel or Stainless Steel
Size : 1050 x 800 x 22
Surface Mounted Type.

1" or 34" Rubber Hose reel.

With Landing Valve and Nozzle.

All Dimensions are in mm

unless otherwise mentioned.
FRONT VIEW
Available in Different size and design.
220
110
Ø52

Materials : 100
1050
For Steel
Cold Rolled Steel Type. Zinc Phosphate.
Steel Thickness 1 mm. 800
220
For Stainless Steel
Stainless Steel 304 1 mm
1050
(Availbale other type of Stainless steel sheet upon request)
TOP VIEW
Available Hairline or mirror finishing.
Door with Chrome Plated Lock. SIDE VIEW
Red color Powder coated body(Full).
Silk Screen Name Printed.

REV DATE DESCRIPTION APPROVED

NO BY
M
A F C O
Surface Mounted Double Door
FOR SAFETY EQUIPMENTS MFG. CO Fire Hose Cabinet (MF600)
JEDDAH
KINGDOM OF SAUDI ARABIA
 SPECIFICATIONS :
1. MATERIAL :
(A) DOOR & FRAME : 1MM STAINLESS STEEL
SS 304 HAIR FINISH.
SINGLE DOOR RECESSED TYPE FIRE SYNTHETIC HOSE RACK CABINET
(B) BACK BOX : GI STEEL
(C) DOOR : SOLID DOOR
2. CABINET TO ACCOMMODATE :
(A) 2-1/2 " x 30 MTR FIRE SYNTHETIC HOSE ON RACK
(B) 2-1/2 " ANGLE VALVE
Size : 800 x 800 x 250
800 Wall Mounted Type.
250

KNOCK OUT HOLE

2-1/2" ANGLE VALVE

FRAME & DOOR 800
SS - 304 HAIR FINISH
PIANO HINGES
CLOSE OPEN

SS Chrome Plated Lock

BACL BOX : GI STEEL - RED / WHITE POWDER COATED

2-1/2" x 30 MTR FIRE SYNTHETIC HOSE ON RACK

6KG DCP FIRE EXTINGUISHER

REV NO DATE DESCRIPTION APPROVED BY

M
A F C O
MAZEN A.JADID FACTORY FIRE SYNTHETIC RACK CABINET
FOR SAFETY EQUIPMENTS MFG. CO
JEDDAH
KINGDOM OF SAUDI ARABIA
 SPECIFICATIONS

1. Cabinet material 1.2 mm Stainless Steel (304) Hair Finish.

Back box Mild Steel, White (RAL 3000) Powder Coated. FIRE HOSE REEL & EXTINGUISHER CABINET
Type of cabinet Recessed mounted
2.
RECESSED MOUNTED
3. Dimensions 800(H) x 1050(W) x 250(D)

4. Type of Door Solid Door

5. Type of Lock Chrome Plate Lock

6. Type of Hinges Piano Hinges

BACK BOX MILD STEEL 1MM GI Type
1" x 30MTR. FIRE HOSE REEL, AUTOMATIC SWINGING TYPE,
MAFCO (MODEL:- MAFFH-C-30R) 1050
Cabinet to 25
0
7. 1.5" Angle Valve with built-in PRV,
Accomodate
Model : GIACOMINI(A155/A156)UL FM

6 KG DCP FIRE EXTINGUISHER, MAFCO (MODEL- MAF6DCP)

1.5" Knock-out hole

DOOR
1.5" Angle Valve with built-in PRV
PIANO HINGES
800
Chrome Plate SS LOCK OPEN CLOSE CLOSE OPEN

1" x30 MTR. FIRE HOSE REEL

DOOR
6 KG DCP FIRE EXTINGUISHER PIANO HINGES

TITLE : REV NO DATE DESCRIPTION APPROVED BY

MAZEN A.JADID FACTORY Recessed Type Double Door
A F C O
M
FOR SAFETY EQUIPMENTS MFG. CO Fire Hose Cabinet
JEDDAH
KINGDOM OF SAUDI ARABIA

Email : mafco2000@hotmail.com
 Fire Hose Cabinet.
Body Size : 800x 1250 x 240
240
880
Outer frame size : 880x 1330 x 240 40
40
Recessed Mounted Type.
1x30 mater long Rubber Hose reel.
1.5" Angle landing Valve and Nozzle.
2.5" Pressure Restricting valve.
900
900
6Kg Powder (ABC) Type Fire Extinguisher.
All Dimensions are in mm 1330 1250
1330
unless otherwise mentioned.
Available in Different size and design.
350
Materials : 350
For Steel
Cold Rolled Steel Type. Zinc Phosphate.
Steel Thickness 1mm.
(Available other type of Steel sheet upon request)
Door with Chrome Plated Lock.
Red color Powder coated Full Cabinet (RAL 3020).
Silk Screen Name Printed.
REV NO DATE DESCRIPTION APPROVED BY
M
A F C O Wall Mounted Type Double Door
FOR SAFETY EQUIPMENTS MFG. CO
Fire Hose Cabinet
JEDDAH
KINGDOM OF SAUDI ARABIA
 310
800

800

MAFCO

1700
1700

‫قيرحصقافطا قودنص‬
FIRE HOSE CABINET

All‫ق‬Dimensions‫ق‬are‫ق‬in‫ق‬mm
unless‫ق‬otherwise‫ق‬mentioned. FIRE‫ق‬HYDRANT‫ق‬CABINET.
Materials‫ق‬:
Size‫ق‬:‫ق‬1700‫ق‬x‫ق‬800‫ق‬x‫ق‬310
Cold‫ق‬Rolled‫ق‬Steel‫ق‬Type.‫ق‬GI‫ق‬steel‫ق‬with‫ق‬Zinc‫ق‬Phosphate.
Steel‫ق‬Thickness‫ق‬1mm.Door‫ق‬with‫ق‬Chrome‫ق‬Plated‫ق‬Lock. 2.5"‫ق‬Synthetic‫ق‬Hose‫ق‬reel‫ق‬30m‫ق‬Long‫ق‬-‫ق‬3‫ق‬Pcs
Door‫ق‬fitted‫ق‬with‫ق‬welded‫ق‬Hinges
2.5"‫ق‬Nozzle‫ق‬-‫ق‬3‫ق‬Pcs
Red‫ق‬color‫ق‬Powder‫ق‬coated‫ق‬body(Full).with‫ق‬textured‫ق‬powder‫ق‬RAL‫ق‬3020.
REV‫ق‬NO DATE DESCRIPTION APPROVED
BY
A F C O
M
MAZEN A.JADID FACTORY FIRE‫ق‬HYDRANT‫ق‬CABINET
FOR‫ق‬SAFETY‫ق‬EQUIPMENTS‫ق‬MFG.‫ق‬CO
JEDDAH
KINGDOM‫ق‬OF‫ق‬SAUDI‫ق‬ARABIA
 HYDRANTS
AND
CABINETS
WET HYDRANT
Model:
Wet Fire Hydrant is used in places where there is no danger of

used in malls, shopping centers, colleges, hospitals etc.

Technical Features:

The 4” shell hydrant is made according to BS750 standard.

Two numbers of 2½” hydrant landing valves with cap and chain are provided
with the hydrants.

PN16

DRY HYDRANT
Pillar Dry Type Fire Hydrants DRY BARREL DESIGN eliminates damage to
the Hydrant caused by freezing or
corrosion of the upper part.

BREAK AWAY DESIGN to prevent accidents

to the Hydrants, where only the upper
part of the Flange will be broken upon
impact .

Designed as per AWWA C502, which

applies for the wall thickness, loss of head

maintain.
 Model A B C D E F
MFC-HYD-01 895 800 610 400 200 190
MFC-HYD-01A 1295 1200 710 400 200 190
MFC-HYD-02A 895 800 690 470 220 240
MFC-HYD-02 1295 1200 690 470 220 240
 HYDRANT Cabinets

Model: MFC/750 Series Model: MFC/800 Series

Length Width Depth Leg Height Length Width Depth Leg Height
1000mm 800mm 250mm 600mm 1500mm 800mm 250mm 100mm
Standard Accessories Optional Accessories Cabinet Design
2 pcs-Fire Hose Size 2.5”x100 Extra Fire hose 2.5” or Cabinet doors are made of 1.2 mm steel
1.5”. Double jacket sheet with no sharp edges.
with Aluminum coupling. Hoses.
2 pcs-Hose Nozzle 2.5 NST Crow Bar
Thread oven baked to protect against rust.
2.5” Underwriters Play
1 pc-Adjustable Hydrant Wrench Pipe Cabinet is designed to be weather-proof.
1 pc-Pin Lug Spanner Wrench Flashing Light
Fire Axe Torch
4 pcs-2.5” Rubber Gasket for
Hose Couplings
 Certificate of Product Approval
Certificate Number: 1280Ka Issue: 01

Mazen Abdulsalam Jadid Factory For

Manufacturing Safety Equipment
Industrial City No. 3
Jazan Road
Jeddah
Kingdom of Saudi Arabia

is certified by BRE Global Ltd. and is authorised to use the LPCB mark in association with the product(s) listed
in this certificate and appendix having complied with the requirements of the standard(s) detailed below:

Products Standards
‘MAFCO’ Pillar Fire Hydrants EN 14384:2005
(Refer to attached appendix for details) Pillar fire hydrants

This certificate and appendix is maintained and held in force through regular surveillance activities

Joe Milton 28 February 2024 28 February 2024

Signed for BRE Global Ltd. Verifier Date of Issue Date of First Issue
.

This certificate and appendix remains the property of BRE Global Ltd. and is issued
subject to terms and conditions (for details visit www.redbooklive.com/terms).
To check the validity of this certificate and appendix please visit
www.redbooklive.com/check, scan the QR tag or contact us.
BRE Global Ltd, Watford, WD25 9XX
T: +44 (0)333 321 8811 E: enquiries@breglobal.com
LPCB is a Registered Trademark of the Building Research Establishment Ltd.

BF1314A Rev.1.1 Page 1 of 2 © BRE Global Ltd, 2024

 Appendix to Certificate No: 1280Ka Issue: 01
XXXa
Mazen Abdulsalam Jadid Factory For Manufacturing Safety Equipment

‘MAFCO’ Pillar Fire Hydrants to EN 14384:2005

Product Name Inlet size Hose outlet Pumper LPCB Ref. No.

MAFH4 4” (DN 100) 2 X 2.5” BSP (65mm) 1 x 4” BSP (100mm) 1280Ka/02

MAFH6 6” (DN 150) 2 X 2.5” BSP (65mm) 1 x 4” BSP (100mm) 1280Ka/03

This certificate and appendix is maintained and held in force through regular surveillance activities

Joe Milton 28 February 2024 28 February 2024

Signed for BRE Global Ltd. Verifier Date of Issue Date of First Issue

This certificate and appendix remains the property of BRE Global Ltd. and is issued
subject to terms and conditions (for details visit www.redbooklive.com/terms).
To check the validity of this certificate and appendix please visit
www.redbooklive.com/check, scan the QR tag or contact us.
BRE Global Ltd, Watford, WD25 9XX
T: +44 (0)333 321 8811 E: enquiries@breglobal.com
LPCB is a Registered Trademark of the Building Research Establishment Ltd.

BF1314A Rev.1.1 Page 2 of 2 © BRE Global Ltd, 2024

 HYDRANT Cabinets

Model: MFC/750 Series Model: MFC/800 Series

Length Width Depth Leg Height Length Width Depth Leg Height
1000mm 800mm 250mm 600mm 1500mm 800mm 250mm 100mm
Standard Accessories Optional Accessories Cabinet Design
2 pcs-Fire Hose Size 2.5”x100 Extra Fire hose 2.5” or Cabinet doors are made of 1.2 mm steel
1.5”. Double jacket sheet with no sharp edges.
with Aluminum coupling. Hoses.
2 pcs-Hose Nozzle 2.5 NST Crow Bar
Thread oven baked to protect against rust.
2.5” Underwriters Play
1 pc-Adjustable Hydrant Wrench Pipe Cabinet is designed to be weather-proof.
1 pc-Pin Lug Spanner Wrench Flashing Light
Fire Axe Torch
4 pcs-2.5” Rubber Gasket for
Hose Couplings
 MAFCO FOAMCHAMBER

APPLICATION
Foam Chamber is used in one of the most common application to protect vertical fixed roof
(cone) liquid storage tanks, with or without internal floating roof with the low expansion foam
system. The application of foam is on the basis that the risk comprises the total surface area of
the fuel.

TECHNICAL DATA
Model Flow Rate Working Pressure Foam Eexpansion K-factor
PCL 4 4 LPS 5.75
PCL 8 8 LPS 11.5
0.3 MPa to 0.6 MPa ≧6 times
PCL 16 16 LPS 23
PCL 24 24 LPS 34.5
DIMENSIONS (mm)

Item Code PCL4 PCL8 PCL16 PCL24

A 650 750 1050 1200
B 500 600 900 1000
C 150 175 225 275
D DN50 DN65 DN80 DN100
E DN80 DN100 DN150 DN200
 MAFCO

MAFCO Bladder Foam

BLADDER Tank
FOAM Series
TANK SERIES

V01
 Foam Bladder Tank Series MAFCO
INTRODUCTION
The MAFCO foam bladder tank is the main unit of the foam extinguishing system.The
foam tank and the lowl/medium expansion foam generator construct the low/medium
foam spraying system. It can also construct the high expansion total flooding
extinguishing system with high expansion foam generator. It aims at fire of class A and
class B, especially for fire of class B. The foam bladder tank mainly applied in occasions
such as places where inflammable liquid was produced, stored and transported. lt is
especially suitable to put out fire caused by inflammable liquid tank or large scale of
spill fire.
PRINCIPLE
The device consists of pressure tank, bladder, proportioner, pressure gauge, valves and
pipeline. A pump is needed to supply pressurized water. When pressurized water flow
though proportioner, a small part of water (3%-6%) flow into tank from branch pipe to
press the bladder to swap out equal foam concentrate and then mix with another part of
water (97%-93%) to form foam solution in proportioner and provide to foam generator.

PARAMETERS
Sealing
Strength Test Rated
Proportioning Test W.P. Mixing
Model Pressure Flow
Mixer Pressure (MPa) Ratio
(MPa) (L/S)
(MPa)

PHYML32/100L

PHYML32/200L

PHYML32/300L

PHYML32/500L 32

PHYML32/1000L

PHYML32/1500L

PHYML32/2000L DN100 1.32 1.5 0.6~1.2 3% or 6%

PHYM32/1000L

PHYM32/1500L 32

PHYM32/2000L

PHYM48/3000L 48

PHYM80/5000L
80
PHYM80/10000L
V02
 Foam Bladder Tank Series MAFCO
INSTALLATION
Device should be installed at places with shelter to avoid sun and rain. Ambient
temperature should be within 40°C and leave enough space for operation. Device
should be installed at concrete floorand fastened with anchor nuts.
Do the hydraulic test after installing. Open the tank vent valve first then fill water into
bladder from concentrate draining pipe. Then close tank vent valve when bladder is full
of water. Pressurize the system and keeping for 10 minutes when pressure gets test
pressure, tank should have no leakage. Close water inlet valve and open water drainage
valve and concentrate drainage valve to drain water away in tank and bladder. (We will
do this test when products leave the factory)

OPERATION
1) Fill Foam Concentrate
Close water inlet valve and concentrate outlet valve, then fill foam concentrate slowly
from feed inlet (also can fill foam concentrate from concentrate draining pipe). Make
sure bladder vent valve is open if fill foam concentrate from concentrate draining pipe.
Stop the pump now and then to avoid bladder burst if air in bladder can't be vented
timely. Foam concentrate should come from the same manufacturer and the same type.
Close feed inlet when finished filling foam concentrate. Close water draining valve
(there should be no water flow out at this time), tank vent valve and bladder vent valve.
Open water draining valve 30 minutes later, it indicates that the bladder is undamaged
if there is no foam concentrate flow out from water draining pipe.
2) Operation of The Device
① Start water pump to supply pressurized water for the device (biggest working
pressure is 1.2MPa)
② Open water inlet valve and concentrate outlet valve to supply foam concentrate to
pipeline (proportioner)
③ Close water inlet valve and concentrate outlet valve to stop supply foam concentrate
when finished working
④ Keep the pump working for a while to wash pipeline with fresh water.

MAINTENANCE
① To full fill the tank timely after using every time (foam concentrate should be from
the same manufacture and the same type
② Check the surface of the tank and bladder regularly to find out if there are any
leakage and corrosion and check all the valves if they work flexibly. Deal with them if
there are any problems.
③ Check the foam concentrate regularly to find out if it is deteriorative. Change it if it is.

V03
 Foam Bladder Tank Series MAFCO

1 Dregs Drain Valve 1 8 Siphon Pipe

2 Liquid Level Observaion Valves 9 Air Exhaust Valve For Tank
3 Dregs Drain Valve 2 10 Water Inlet Valve
4 Foam Output Valve 11 Proportioning Mixer
5 Air Exhaust Valve For Bladder 12 Water Drain Valve
6 Foam Charging Valve 13 Safety Valve
7 Bladder 14 Tank Body

Installatio
Proportioner Height Main Inlet Hole Mounting
Head n
Capacity Center Above Pipe Side Side hole Weight
Specifications Diameter
Liters Distance Ground Width Width distance KG
Φ X mm D1 (mm)
H1 (mm) H (mm) B2 (mm) B3 (mm) X-φ

100L 500x 4 880 1850 1150 980 900 3 - φ 24 308

200L 500x 4 880 1850 1150 980 900 3 - φ 24 308

300L 500x 4 880 1890 1150 1128 900 3 - φ 24 415

500L 800x 4 880 1980 1150 1230 1000 3 - φ 24 519

1000L 1000 x 8 963 2150 1250 1324 1000 3 - φ 24 618

1500L 1100 x 8 963 2845 1350 1435 1100 3 - φ 24 728

2000L 1200 x 8 1117 2775 1450 1490 1200 3 - φ 24 826

2500L 1300 x 8 1140 2920 1550 1650 1300 3 - φ 24 895

3000L 1400 x 10 1165 3010 1650 1750 1400 3 - φ 26 1180

4000L 1600 x 12 1218 3055 1850 1935 1600 4 - φ 27 1468

5000L 1700 x 12 1345 3305 1950 2050 1700 4 - φ 27 1682

5500L 1800 x 12 1627 3265 2050 2135 1800 4 - φ 27 1806

Size and weight are just for reference, real products can be different
V04
 Foam Bladder Tank Series MAFCO

1 Dregs Drain Valve 1 8 Siphon Pipe

2 Liquid Level Observaion Valves 9 Air Exhaust Valve For Tank
3 Dregs Drain Valve 2 10 Water Inlet Valve
4 Foam Output Valve 11 Proportioning Mixer
5 Air Exhaust Valve For Bladder 12 Water Drain Valve
6 Foam Charging Valve 13 Safety Valve
7 Bladder 14 Tank Body

Proportioner Height Mountin Equipment Mounting

Head Equipment
Capacity Center Above g Hole Total Hole Weight
Specifications Width
Liters Distance Ground Distance Length Distance KG
Φ X mm B3 (mm)
H1 (mm) H (mm) B1 (mm) L (mm) L1 (mm)
1000L 900 X 8 758 1705 460 1250 2100 930 696
1500L 1000 X 8 908 1896 560 1266 2376 1120 822
2000L 1100 X 10 960 2000 600 1370 2620 1280 1099
2500L 1100 X 10 960 2000 600 1370 3080 1680 1245
3000L 1200 X 10 1012 2105 720 1475 3178 1680 1330
4000L 1300 X 12 1062 2205 720 1575 3565 2006 1772
5000L 1400 X 12 1112 2305 840 1675 3805 1800 1992
5500L 1500 X 12 1162 2405 900 1775 3705 1700 2094
6000L 1500 X 12 1162 2405 900 1775 3960 1680 2212
7000L 1600 X 12 1212 2505 900 1875 4055 2100 2390
8000L 1600X 12 1212 2505 900 1875 4555 2400 2628
10000L 1800X 12 1312 2705 960 2075 4935 2700 3216
13000L 1900 X 12 1365 2808 1160 2178 5238 3130 4150

Size and weight are just for reference, real products can be different

V05
Foam Bladder Tank

Bladder Tank Structure Principle

4. Inlet
1. Ball Valve 7.Drain Pipe 10. Siphon 13. Flange
Pipeline
2. Pressure
5.Drain Valve 8. Man Hole 11. Tank Shell 14. Ball Valve
Gauge
12. Safety 15. Check
3. Proportional 6.Ball Valve 9. Bladder
Valve Valve

V06
 MATERIAL SAFETY DATA SHEET (MSDS)
MAFCO BRAND AFFF FOAM CONCENTRATE TYPE 3

SECTION 1: PRODUCT & COMPANY IDENTIFICATION:

Trade Name/Product identification MAFCO Brand AFFF Foam Concentrate Type 3
Application & Use Fire Extinguishing Foam concentrate
Manufacturer Address FOAMTECH ANTIFIRE COMPANY
Office:57, Sharda Niketan, Pitam Pura,
New Delhi-110034 Telefax:011-27021950,Ph.27026153
Emergency Contact: 9810266284)
Works: Plot No. 153, KL,Sector-53,EPIP, Kundli, Sonipat
(Haryana)- 131028
Email-foamtechantifire@yahoo.com; info@foamtechantifire.com
Website : www.foamtechantifire.com
Product Description Mixture of hydrocarbon surfactants, fluoro surfactants & solvents

SECTION 2: INGREDIENT - COMPOSITION INFORMATION:

MAJOR INGREDIENTS CONCENTRATION % CAS.No. HEALTH CLASS
1. Hydrocarbon Foaming Agent 5 -10% N/A Xi R 36, 37, 38
2. Amphoteric fluorinated Polymer 3.0-5.0% N/A --
3. Solvent 10-15% -- --
4. Water QS 7732-18-5 --

SECTION 3: HAZARD IDENTIFICATION:

Flammability Corrosive Material Little corrosive to metal
LEL %v N/A likes MS, Bronze,
UEL %v N/A Aluminum
TDG Flammability N/A Organic Peroxide No
Explosion Sensitivity to impact None Auto-ignition N/A
Temperature o C
Flammable Material No Hazardous Polymerization Will not occur
Oxidizer No Explosive Material No
Flash Point >98oC Pyrophoric Material No
Explosion Sensitivity to static Electricity None Others N/A
Combustible Liquid No
Hazardous Combustion Products: Not known. However oxides of carbon, nitrogen and sulfur may be formed during
use for extinction of fire.
NFPA Hazard Signals Health Flammability Stability Special
1 0 0 N/A

Page 1 of 4 MSDS
 MATERIAL SAFETY DATA SHEET (MSDS)
FOAMER BRAND AFFF FOAM CONCENTRATE TYPE 3

EMERGENCY OVERVIEW:
FIRE
Fire Extinguishing Media Material is itself a fire extinguishing agent
Special Procedures None
Unusual Hazard None
EXPOSURE
User guidelines Avoid getting chemicals on you or in you. Cause eye-irritation and may cause
skin irritation. Swallowing large amount of chemicals may cause injury or
irritation
SPILLS
Steps to be taken Stop leak. Collect spilled concentrates. Rinse the affected area with plenty of
water until it no longer foams. Care should be taken to avoid slip hazard.

SECTION 4: FIRST AID MEASURES:

Flush eyes with water at least for 15 minutes. Remove contaminated clothing. Wash skin with ample water
several times. If ingested, have victim drink water and obtain medical attention immediately.

SECTION 5: FIRE FIGHTING MEASURES:

Fire Extinguishing Media Material is itself a fire extinguishing agent
Unusual Hazard None
Flammability
LEL %v N/A
UEL %v N/A
TDG Flammability N/A
Explosion Sensitivity to impact None
Flammable Material No
Flash Point >98OC

SECTION 6: ACCIDENTAL RELEASED MEASURES:

Stop leak. Use appropriate protective equipment during cleanup. Collect spilled concentrates. Rinse the affected area
with plenty of water until it no longer foams. Care should be taken to avoid slip hazard. Disposal into drains should
be avoided if at all possible and should under no circumstances be allowed without first consulting the local water
authority and environment agency and also be made in accordance with federal, state and local regulations. Spillage
can be absorbed with sand or contained with earth or spill control material. Shovel up spillage and place
in labeled, sealable container for subsequent safe disposal as per local laws.

SECTION 7: HANDLING & STORAGE:

Handling: No special handling techniques are required. Avoid getting chemicals on you or in you. Wash hands after
handling chemicals. Don't eat or drink while handling chemicals.

Storage: Recommended storage temperature is ( - )10oC to 50oC. No Special conditions are required for safe storage.
The product should be stored in original sealed containers above ( - ) 10oC and below 50oC and as much as possible
it should keep from being washed into surface water.

Page 2 of 4 MSDS
 MATERIAL SAFETY DATA SHEET (MSDS)
MAFCO BRAND AFFF FOAM CONCENTRATE TYPE 3

SECTION 8: EXPOSURE CONTROLS / PERSONAL PROTECTION:

Avoid getting chemicals onyou or in you. Use tightly sealed safety glass or goggles for eye protection, use
PVC/Nitrile or butyl rubber gloves, apron and rubber boots for skin protection. Use in well ventilation area
and avoid prolong, extensive or repeated inhalation.

SECTION 9: PHYSICAL & CHEMICAL PROPERTIES:

Physical State Clear non-viscous Liquid Vapour Density (Air=1) Data not available
Odour Characteristic Density at 20oC 1.010 – 1.040g/cm3
Appearance Clear Liquid Vapour Pressure Data not available
Boiling point/Range 100°C (Initial) @35°C,mm Hg
Pour point Flow at ( - ) 10⁰C Solubility in water @30°C 100% Soluble
pH 7.5 – 8.5

SECTION 10: STABILITY & REACTIVITY:

Chemical Stability Stable
Incompatibility with other material Avoid use of product on burning metals, electrically energized
equipment and contact with water reactive material
Reactivity None
Hazardous Reaction Products Not known

SECTION 11: TOXICOLOGICAL INFORMATION

Effects of exposure/Symptoms Cause eye-irritation and may cause skin irritation.
Swallowing large amount of chemicals may cause injury or
irritation

SECTION 12: ECOLOGICAL INFORMATION;

Description Foamer Brand AFFF-3% Amber Colour Liquid
Temperature 28°C

Test Results Limit Reference

C.O.D.(mg./L) 183600.0 1000K (max) * APHA 22 nd Edn.
5220B
B.O.D./C.O.D. 20 Days 0.97 0.65 (min) * APHA 22 nd
Edn.5210B
Toxicity, LC50 d(mg./L) 1032.5 500 (min) * ASTM: E 729
Skin Irritation/Dermatological Effect Not Irritant, A chemical is considered to be an FHSA- Federal
(14 Days test) (No reversible skin lesions, such as inflamed skin, irritant if it causes reversible skin Hazardous
ulcers, bleeding and bloody scabs observed at the end lesions, such as inflamed skin, Substances Act,
EPA –
of test period) ulcers, bleeding ,and bloody scabs Environmental
observed at the end of test period Protection Agency
N.B. * Requirement as per U S MIL. SPEC MIL-F-24385F

SECTION 13: DISPOSAL CONSIDERATION:

The product shall not have any significant detrimental effect on the environment, nor present a waste disposal problem
however prevent discharge foam/foam solution to waterways without treatment. Waste disposal should be made in
accordance with central, state and local regulations. Waste may be incinerated or disposed of by treatment at a
permitted facility only with permission or as advised by competitive authority.
Page 3 of 4 MSDS
 MATERIAL SAFETY DATA SHEET (MSDS)
MAFCO BRAND AFFF FOAM CONCENTRATE TYPE 3

SECTION 14: TRANSPORT INFORMATION

Not classified as dangerous or Hazardous for transport under UN, IMO, ADR/RID and IATA/ICAO

SECTION 15: REGULATORY INFORMATION

Shipping Name N/A
Shipping Code/Label N/A
Hazardous waste I.D. No N/A
Label for supply None required
UK regulatory references Health and safety at work act 1974
Chemical (Hazard information & Packaging for supply)
Regulation 1994/Amendment Regulations 1996
EC directives Substances Directive 67/548/EEC as amended by 69/81/EEC,
70/189/EEC, 73/146/EEC, 75/409/EEC, 79/831/EEC, General
Preparations Directives 88379/EEC
Statutory Instruments Chemical (Hazard information & Packaging for supply)
Regulation 1994/Amendment Regulations 1996
Guidance Notes Occupational exposure limit EH40/96
Transportation of Dangerous Goods information Non required as per ADR/RID/IMGD, IATA & 49 CFR

SECTION 16: OTHER INFORMATION

CAS : Chemical Abstracts Service
DOT : Department of Transportation
NFPA : National Fire Protection Association
TDG : Transportation of dangerous goods.
UEL : Upper exposure limit
LEL : Lower exposure limit.

DISCLAIMER
This information is based on our knowledge and is intended to describe the product for the purpose of health,
safety and environmental requirements only. It should therefore not be construed as guaranteeing any specific
property of the product. User is required to ensure suitability of the product for the intended use, compliance to
regulations, for its safe use and disposal. FOAMTECH ANTIFIRE COMPANY will not be held responsible or
liable for any injury or accident of any kind.

Page 4 of 4 MSDS
 MAFCO FOAM MONITOR
Manual Fire Monitor has characteristic with adjustable flow rate, distant range and wide discharging range and the discharge range is also
adjustable-----have both straight stream and fog stream.The fire monitor has a large flow rate and a long range. The barrel can be rotated
360° horizontally, and the head can be tilted at a large angle. The operation is convenient and flexible, and it can be positioned and locked.
Manual fire monitor can be installed in the places of flammable or explosive chemical circumstance, airport, oil area, oil transport wharf,
shipyard etc.

Model PL40 PL64

Flow (L/s) 40 64

Rated W.P. (MPa) 0.9 0.8

W.P. Range (MPa ) 1.2

≥55 (Water) ≥50 (Water)

Distance(m)
≥50 (Foam) ≥60 (Foam)

Maximum Pitch Angle(°) -15~ +60° -15~ +60°

25% Water
(min) ≥2.5
Drain Time

Connection Method DN 65 , 80 ,100 Flange

MAFCO FIRE FOAM
BLADDER TANK
 2

Description

The bladder tank is one component in a balanced pressure proportioning system. Its operation requires no
external power other than a pressurized water system. The bladder tank may be used with any foam agent. It can
be used in a proportioning system incorporating single or multiple proportioners and any suitable discharge
device.
The bladder tanks have numerous applications including petroleum systems engineering, truck loading racks,
aircraft hangers, dip tanks, pump rooms, and helipads, etc.

The bladder tanks are available in both vertical and horizontal tank models and a variety of nominal
capacities as listed in the tank information tables. Both tank models feature perforated center tubes which allow
improved agent discharge.

Features incorporated into the bladder tanks include the following:

 Water pressurized bladder construction, alleviating the requirement for foam pumps or other energy
sources
 Valves that are pinned in the normal operative positions and are supplied with nameplates identifying their
functions and operating instructions
 Bladder tanks are supplied with corrosion-resistant piping.
 Exterior tank surfaces finished in red standard system paint or coated with an epoxy “CR” red finish for
use in marine or corrosive environments
 Tanks with a high build epoxy coated interior for use with both fresh and salt water

Constitution Of the Bladder foam tank

The pressure bladder foam tank system is mainly consisting of foam tank shell, bladder, foam pressure
proportioner, water inlet control valve, foam concentrate outlet control valve, water drain valve, foam concentrate
drain valve, Foam/bladder air vent valve, Water/tank air vent valve .
 3

1,Water/tank air vent valve 2,Bladder 3,Tank 4,Foam level indicator 5, Foam concentrate fill/drain
valve 6,Water drain valve 7,Foam/bladder air vent valve 8,Safety valve 9,Water inlet valve 10,Foam outlet
valve 11,Foam proportioner

1,Water/tank air vent valve 2,Bladder 3,Tank 4,Foam level indicator 5, Foam concentrate fill/drain
valve 6,Water drain valve 7,Foam/bladder air vent valve 8,Safety valve 9,Water inlet valve 10,Foam outlet
valve 11,Foam proportioner
 4

Principle Of Work

1,System inlet valve 2,System outlet valve 3,Bladder tank water inlet valve 4,Bladder tank water outlet valve
5, Flange 6,Foam concentrate fill/drain valve 7, Foam/bladder air vent valve 8, Water/tank air vent valve
9,Water drain valve

The bladder tank is a steel pressure vessel which stores a foam concentrate contained within an elastomeric
bladder.

Step 1: When the system operating, the fire pump supply a pressurized water to the foam proportioner, and
water flow Separate into two direction, one keep forward, and one enter into the tank where surround the internal
bladder, from the (3)bladder tank water inlet valve.

Step 2: The pressurized water push the bladder in the tank, and the concentrate is discharged from the
concentrate tube by incoming water applying pressure to the bladder. This applied energy is transferred to the
concentrate, supplying pressurized concentrate to the proportioner.

Step 3: The extruded foam concentrate mixes with the water from the system and create a 3% foam/water
mixed solution, or a 6% foam/water mixed solution.

Step 4: The foam/water mixed solution is routed from the foam proportioner outlet to one or more foam
chambers, or to foam monitors, or to foam sprinkler.
Step 5:The above foam maker equipment mixes the air with the water/water mixed solution, create foam, and
spray the fire to the fire.
 5

Technical parameters bladder tank

Capacity 0.2m³-10m³

Material Carbon steel

Working pressure 0.6-1.6（M Pa）

Mixing ratio 3% or 6%

Water inlet and outlet pipe DN80-DN200

Mixture flow rate 4L/S－160L/S

Foam concentrate storage temperature 0～40℃

Technical parameters of foam proportioner

Mixture flow rate Mixing ratio Working Pressure Normal diameter

Molde
（L/s） （%） pressure（MPa） loss（MPa） （mm）

PHYM16 4-16 80 or 100

PHYM35 17-35 100

PHYM48 36-48 150

3 or 6 0.6-1.6 ≤0.15
PHYM64 48-64 150

PHYM80 65-80 150

PHYM100 81-100 150 or 200

Note: The Foam proportioner could be match different capacity tanks. For example: the PHYM16 foam
proportioner could be match with 500 liter,1000liter or 2000 liter tanks according to the project requirement.
 6

ORDERING INFORMATION

PHYM /
10 times of the capacity （m³）

Flow rate of the foam bladder tank system

“L” means it is a vertical type bladder tank

Blank means it is a horizontal type bladder tank

Example: PHYML-16/20 means that it is a vertical type bladder tank with max 16 L/s mixture flow
rate,2 m³ capacity
PHYM 36/40 means that it is a horizontal type bladder tank with max 36 L/s mixture flow
rate,4 m³ capacity

Please specify the following in your inquiry:

 Type of tank required, Horizontal or Vertical

 Capacity of tank
 Mixture flow rate of the bladder tank proportioner
 Mixing ratio of the foam proportioner,3% or 6%
 Any other options required
MAFCO Automatic Sprinkler
System Deluge Alarm Valve

Using Manual
 ZSFM TYPE Deluge Alarm Vlave

1) Introduction and Application:

Deluge valve (as shown in Figure 1) ,which is mainly composed of the valve body, water
alarm gong, pressure switch, anti-reset device, automatic drip valve, solenoid valve and
connecting pipe fittings. It is a direct sealed diaphragm valves, widely used in various types
of open systems such as automatic sprinkler system, water curtain system, water mist
system. Enjoying advantages of simplenes in structure, reliance in performance, flexibility in
installation and convenience in maintenance. The valve by our company is manufactured to
GB5135.5-2003 standard with ductile cast iron(QT450-10) valve body and bonnet, Max.
working pressure is 1.2MPa.

Figure 1 ZSFM type deluge alarm valve

2.1) Specification and Main Technical Parameter

 Nominal Diameter Strength Test Sealing Test Rated W.P. Range Hydraulic Friction
Specification Starting Time（S）
(mm) （MPa） （MPa） （MPa） （MPa）
ZSFM50 50
ZSFM65 65
ZSFM80 80
ZSFM100 100 ≤15
ZSFM125 125 4.8 2.4 0.14~1.2 ≤0.07
ZSFM150 150
ZSFM200 200
ZSFM250 250
≤60
ZSFM300 300

2.2) Structural Dimension

Centre-to-Centre
Flange Outside Distance for Dia. Of Screw Hole Drainage Outlet Connect Thread of
Specification No. of Screw Hole
dia. (mm) Symmetrical Screw (mm) Thread (mm) Water Gong (mm)
Holes(mm)
ZSFM50 165 125 18 4 G3/4″ G3/4″
ZSFM65 185 145 18 4 G3/4″ G3/4″
ZSFM80 200 160 18 8 G1″ G3/4″
ZSFM100 220 180 18 8 G1″ G3/4″
ZSFM125 250 210 18 8 G1″ G3/4″
ZSFM150 285 240 22 8 G1″ G3/4″
ZSFM200 340 295 22 12 G1 1/2″ G3/4″
ZSFM250 410 355 26 12 G1 1/2″ G3/4″
ZSFM300 460 410 26 12 G1 1/2″ G3/4″

3) Working Principle

Deluge system consists of deluge valve, fire sprinkler head (either open type or water
mist or water curtain type), fire sensors (electronic detectors, closed-type fire sprinkler),
water alarm gong, pressure switches and electric control panel. Once deluge system opens
all sprinklers spray water, it mainly used in places where the fire spread speed is fast, or the
clearance height exceeds the requirements of closed-type fire sprinkler, and the places with
fire dangerous level II or above.
The deluge alarm valve is an important component of the deluge system. Diaphragm
type deluge alarm valve uses diaphragm movement to open and close the valve. The
diaphragm divides the valve into a control chamber, a water outlet chamber and a water
inlet chamber. The control chamber communicates with the water source side. Under the
quasi-working state, the water pressure of the control chamber is the same as that of the
inlet chamber, because the different area between left and right chambers affected by the
water, ensure that the diaphragm deluge valve has a good seal to remian the water in water
supply side, while no water in system side.
Deluge valve starts either electrically or manually or by means of drive pipe. It depends
on the on-site situation. The water pressure level in the diaphragm chamber determines
either starting or closing valve. The water is kept holding down and can not go up into
system pipeline when the pressure in the control chamber is equal to or above that of water
supplying side. When the solenoid valve is opened or the emergency manual valve is
opened by the staff or the closed fire sprinkler is opened, the water compensation volume in
the control chamber is smaller than the discharge volume and the pressure in the control
chamber is rapidly reduced, when the water pressure of the control chamber drops to a
certain value, and the deluge valve will be opend by the water pressure in water inlet side. At
the same time, the water flow enters the alarm pipeline, the water alarm bell sounds, the
pressure switch action, and the linkage fire pump start.
The deluge valve is provided with an anti-reset device. After the water pressure of the
control chamber is released, the control chamber can not be re-boosted regardless of
whether the solenoid valve or the manual valve is closed again, and the valve remains open
to ensure the fire extinguishing process. The deluge valve will not be closed again due to a
power failure. After the fire is extinguished, the staff must open the reset ball valve to
re-boost the pressure to close the valve.
(a) Electric panel control：
The electrical detector in the protected area transmits fire signal to electrical control
panel which identifies and sends out the starting signal to the solenoid valve and diaphragm
pressure releases then valve starts working.
(b) Connection conveyance pipe control：
Install the close heat-responsive sprinkler detector in the protected area and have it
connected with diaphragm chamber by means of piping. The diaphragm pressure falls down
to start the deluge valve then fire water goes into the pipeline network from supply side and
distribute in the protected area after sprinkler activates. The connection conveyance pipes
can be controlled either hydraulically or pneumatically to separately shape wet type or dry
type deluge system.
(c) Manual start control:
Manual start method is usually for regulation and test or emergency start. Open the
manual start valve to release pressure the diaphragm chamber and then valve starts pushing
water run into the system pipeline and extinguish fire via open sprinklers.
1.Main Valve Body 2. Drainage Valve 3.Pressure Gauge for Supplying Water
4.Reset Ball Valve (Normally Close) 5.Manual Start Ball Valve (Normally Close )
6. Anti- reset Device 7.Testing Valve for Water Gong 8. Solenoid Valve
9. Pressure Gauge for Diaphragm Chamber
10.Ball Valve for Alarm Pipeline (Normally Open) 11.Water Alarm Gong
12.Pressure Switch 13. Drainage Valve (Normally Close)

4) Installation
(a) Get the valve out of package and check that there is dross in the valve chamber or pipe
outlets.
(b) Work of assembly, regulation, adjustment and test must be carried out by special people
of required qualification or experienced technical personnel. All deluge valves have been
subject to sealing test under 2.4 MPa before selling thus disassembly by users is seriously
forbidden.
(c) The system must be installed in warm and bright rooms and there should be 0.5 m
surrounding spacing.
(d) Control valves must be installed hand in hand in both water supply side and system side
to facilitate regulation test and maintenance. The pipelines must be cleaned with clear water
without muds to protect the reset ball valve before installation in accordance with the Code
for Installation Work.
(e) Valve can be installed either vertically or horizontally. But the magnetic core of solenoid
valve must be kept vertical with its installation method.
(f) Use reset ball valve and emergency manual quick opening valve properly to avoid loss.
(g) A filter valve is necessarily required before the inlet of valve keep waste avoiding sealing
failure and wrong actions according to Code for Automatic Sprinkler System GB50054-2001.
(h) A check valve is needed before inlet of deluge valve to evade wrong actions when there
are multiplied linked deluge alarm group.

5) Regulation and Test

The standby status of valve must be restored after regulation and test and extinguishing fire
in compliance with the following tips:
(a) Shut of control valve in the water-supply side.
(b) Open the deluge valve, drain valve, alarm valve, and all auxiliary drain valves in the
system to drain out the remain water in the system. Dripping no water means dripping
completion.
(c) Close the emergency manual quick opening valve and test alarm valve then open reset
ball valve; Meanwhile close the side of the control valve in the deluge valve system.
(d) Press the "Reset" button in the control panel to have the electronic control system reset
and solenoid valve closed.
(e) Slowly open control valve in the water supply side until the pressure gauge for water
supply and diaphragm chamber pressure gauge indicates the same level and then open
control valve at full degree.

6) Alarming Test

We suggest that the test being performed quarterly in accordance with the following tips:
(a) Close the valve for water gong to prevent water from running into system side.
(b) Open test valve for alarm gong and check that pressure switch works alarming.
(c) Shut off test valve and reopen water gong valve to restore standby situation.
7) Open-close functional test

The test is made preferably annually and in warm season. Precautions for leakage
during test must be taken and draining devices should be installed in those pipelines that
water accumulates. Should you take some methods in case of failure in opening valves. Or
alternatively use a water control valve to avoid all those steps mentioned above. Tips for test
is as follows:
(a) Notice those personnel and departments related.
(b) Have the linked electronic detector started to open the deluge valve. Eg. Open test valve
in the control pipelines in dry or wet system.
(c) Check that the system has sufficient water supply.
(d) Make the system restore standby status in accordance with Tips for Adjust after the test
is completed.

8) Maintenance

Precautions must be made and people should be on duty for fire security after related
people or department have been noticed of the fire extinguishing disability of the system
due to maintenance or other reasons.

8.1) Tips for valve functional suspension:

(a) Shut of control valve in system side.
(b) Open all drip valves.
(c) Shut off water-supply valve for diaphragm chamber. It is good time for maintenance.
Note: Maintenance of deluge valve must be undertaken by those of required qualification
experienced technical personnel.
Warning: Fire precautions must be taken during maintenance, for the system has been
disabled.
8.2) Tips for chamber maintenance.
(a) Remove the copper pipe from the valve bonnet and loosen the flexible joint and have
screws separated from valve bonnet, then get the rubber diaphragm, spring, supporting
piece removed.
(b) Check up the diaphragm. Slight deformation is normal. Have it renewed in case that
there is obvious deformation, bulge, cracks.
(c) Clean all the above accessories and chamber.
(d) Put diaphragm, supporting piece, spring, valve cover in order and tighten the screw bolts
to insure its sealing performance. It must be insured that diaphragm seal interface must be
consistent with seal groove on the sphere during installation, and support piece, spring and
diaphragm and the valve cover must be stuck with slots. Any assembly failure may cause the
valve not to work normally.
Warning: Do not open valve cover in pressure condition.
 MAFCO

FIRE SPRINKLERS
 SPRINKLER SPRINKLER
PENDENT SPRINKLER HEAD

PENDENT SPRINKLER
Standard response Quick response

All Hazards Light and Ordinary Hazards

5 mm bulb 3 mm bulb
UL Listed*

Applications Applications
House Mall House Mall
Hotel Dormitory Hotel Dormitory
Hospital Trade Center Hospital Trade Center

K Factor : K5.6(80), K8.0(115) K Factor : K5.6(80), K8.0(115)

Thread Dimension : ½” NPT (15 mm), ¾” NPT (20 mm) Thread Dimension : ½” NPT (15 mm), ¾” NPT (20 mm)
Response : Standard response Response : Quick response
Finishes : Brass, Chrome, White Finishes : Brass, Chrome, White
Temp. Rating : 57˚C(135˚F), 68˚C(155˚F), 79˚C(175˚F),
Temp. Rating : 57˚C(135˚F), 68˚C(155˚F),
93˚C(200˚F), 141˚C(286˚F)
79˚C(175˚F),93˚C(200˚F), 141˚C(286˚F)

They are preferred in suspended ceilings or in locations where downward sprinklers are appropriate. Water
sprays in a conically expansion. They can be used with escutcheons.

3,0m 10”

2,4m 8”

1,8m 6”

1,2m 4”

0,6m 2”

0 0
4,3m 3,7m 3,0m 2,4m 1,8m 1,2m 0,6m 0 2” 4” 6” 8” 10” 12” 14”

7 psi 15 psi 30 psi

0.5 bar 1 bar 2 bar
 SPRINKLER SPRINKLER
SIDEWALL SPRINKLER HEAD CONTROL MODE-STANDARD SPREY SPRINKLER

SIDEWALL SPRINKLER
Standard response Quick response

All Hazards Light and Ordinary Hazards

5 mm bulb 3 mm bulb

Applications Applications
House Mall
House Mall
Hotel Dormitory
Hotel Dormitory
Hospital Trade Center
Hospital Trade Center

K Factor : K5.6(80), K8.0(115) K Factor : K5.6(80), K8.0(115)

Thread Dimension : ½” NPT (15 mm), ¾” NPT (20 mm) Thread Dimension : ½” NPT (15 mm), ¾” NPT (20 mm)
Response : Standard response Response : Quick response
Finishes : Brass, Chrome, White Finishes : Brass, Chrome, White
Temp. Rating : 57˚C(135˚F), 68˚C(155˚F), 79˚C(175˚F), Temp. Rating : 57˚C(135˚F), 68˚C(155˚F),
93˚C(200˚F), 141˚C(286˚F) 79˚C(175˚F),93˚C(200˚F), 141˚C(286˚F)

They are used in suspended ceilings or in ceilings where piping is concealed. The mounting is being made
on the wall. They spray forwards and downwards. They are used only in wet systems and low hazard
systems. Used in places such as residences, hotels, hospitals, dormitories, malls.

3,0m 10”

2,4m 8”

1,8m 6”

1,2m 4”

0,6m 2”

0 0
7,3m 6,7m 6,1m 5,5m 4,9m 3,7m 3,0m 2,4m 1,8m 1,2m 0,6m 2” 4” 6” 8” 10” 12” 14” 16” 18” 20” 22” 24”

7 psi 15 psi 30 psi

0.5 bar 1 bar 2 bar
 SPRINKLER SPRINKLER
UPRIGHT SPRINKLER HEAD STORAGE – EXTRA LARGE ORIFICE (ELO)

UPRIGHT SPRINKLER

Standard response Quick response

All Hazards All Hazards

5 mm bulb 3 mm bulb

Applications Applications
Factory Factory
Warehouse Warehouse
Specific Applications Specific Applications

K Factor : K11.2(160) K Factor : K11.2(160)

Thread Dimension : ¾” NPT (20 mm) Thread Dimension : ¾” NPT (20 mm)
Response : Standard response Response : Quick response
Finishes : Brass, Chrome Finishes : Brass, Chrome
Temp. Rating : 57˚C(135˚F), 68˚C(155˚F), 79˚C(175˚F), Temp. Rating : 57˚C(135˚F), 68˚C(155˚F), 79˚C(175˚F),
93˚C(200˚F), 141˚C(286˚F) 93˚C(200˚F), 141˚C(286˚F)

ELO sprinklers are used in systems that are designed in accordance with density/area criteria. Compared to
standard sprinklers it has the advantage to work with lower pressure at higher flow rates.
3,0m 10”

2,4m 8”

1,8m 6”

1,2m 4”

0,6m 2”

0 0
3,7m 3,0m 2,4m 1,8m 1,2m 0,6m 0 2” 4” 6” 8” 10” 12”

7 psi 15 psi 30 psi

0.5 bar 1 bar 2 bar
ACCESSORIES TECHNICAL DATA

Escutcheon - Chrome - White Model

K factor
Thread size Response time Max. working pressure Min. working pressure
us metric
DY3323 5,6 80 1/2” NPT (15mm) Standard
DY3333 8,0 115 3/4” NPT (20mm) Standard
Preferred for pendent and sidewall type sprinklers. Used for DY3327 5,6 80 1/2” NPT (15mm) Standard
covering gaps in ceilings and walls or to make adjustments. DY3337 8,0 115 3/4” NPT (20mm) Standard
Used for ½” and ¾” NPT thread DY3329 5,6 80 1/2” NPT (15mm) Standard
Painted in white and chrome coated DY3339 8,0 115 3/4” NPT (20mm) Standard
DY3423 5,6 80 1/2” NPT (15mm) Quick
Tw o - p i e c e , a d j u s t a b l e
DY3433 8,0 115 3/4” NPT (20mm) Quick
DY3427 5,6 80 1/2” NPT (15mm) Quick
DY3437 8,0 115 3/4” NPT (20mm) Quick
DY3429 5,6 80 1/2” NPT (15mm) Quick
DY3439 8,0 115 3/4” NPT (20mm) Quick
175 psi/12,1 bar 7 psi/0,5 bar
DY3529 5.6 80 1/2" NPT (15 mm) Standard
Sprinkler Wrench DY3629 5.6 80 1/2" NPT (15 mm) Quick
DY3539 8.0 115 3/4" NPT (20 mm) Standard
DY3639 8.0 115 3/4" NPT (20 mm) Quick
Designed to facilitate the assembly to sprinklers.
DY3527 5.6 80 1/2" NPT (15 mm) Standard
Available in ½” and ¾”
DY3627 5.6 80 1/2" NPT (15 mm) Quick
DY3537 8.0 115 3/4" NPT (20 mm) Standard
DY3637 8.0 115 3/4" NPT (20 mm) Quick
DY5337 11,2 160 3/4” NPT (20mm) Standard
DY5437 11,2 160 3/4” NPT (20mm) Quick
DY5333 11,2 160 3/4” NPT (20mm) Standard
DY5433 11,2 160 3/4” NPT (20mm) Quick

Sprinkler Stop Valve

Temperature ratings

Sprinkler temperature Color

Hazard class
The stop valve is designed for a quick intervention when
°C °F
sprinkler heads are activated, and it is being used for
control of the water flow before handling valve and pumps. Ordinary 57 135 Orange
Ordinary 68 155 Red
Intermediate 73 175 Yellow
Intermediate 93 200 Green
High 141 286 Blue

Standard Response Quick Response

5 mm 3 mm

Sprinkler Cabinet - For 6 pcs - For 12 pcs Orange 57 °C (135 °F)

Red 68 °C (155 °F)

Used to prevent sprinklers form being damaged and keep
and protect spare sprinklers for the system. This enables the Yellow 79 °C (175 °F)
system not to have a long downtime. Available in sets of 6
and 12 Green 93 °C (200 °F)

Blue 141 °C (285 °F)

 MAFCO
SPRINKLERS
&
VALVES
MAFCO
ZSTZ ZSTBZ
UPRIGHT VERTICAL SIDEWALL
Physical CharacteristiCS K fAOOR k:::5.6 (SO,6)' k=.8.0 (115,2) Physical Characteristics KFACTOR k=S.6(80,6).k=8.0(115,2)
Frame. . .... .....•............... . ... Bronze Frame .... Bronze
Button ..••......•....•.......••• Bras.~/Copper THREAD SIZE 1 12" R • 3/4" R Button Brass/Copper HREAD SIZE 1 /2 R· 3/4- R
Bulb ... , •....•••...•••...••.....••....•• Glass 1 12" NPT ·3/4" NPT Bulb •....•...•.•....••..•.•••...•......• Glass 1 12" NPT ·3/4" NPT
Compression Screw Bronze Compression Screw Bronze
Deflector .•••...••....•.....•••...•••.. Copper APPROVALS CCCF,IS09001,IS014001 Deflector .•••...••....•••...••••...••. Copper APPROVALS CCCF,IS09001,ISOl4()Ol
Se ling ~sembly •...•••. Nlckel Alloy wlTefion Sealing Assembly •....••• Nick.el AlloywlTefion
Or NBR O·Rlng TEMPERATURE 135"F/57"C, 155"f/6SoC, Or NBR O·Ring TEMPERATURE 13SoF/S7°C, 155°F/~C,
17S"f/79·C,lOO"f/93·C, 17soF179'C, 200°F/93°C,
Maximum Working Pressure 286 f/141"C, 36<r'F/182°C M.aximum Working Pressure 286°F/141 -c, 360"H182"C
175 psi (12,1 bar) 175 psi. {l2,1 bar)
SPRINKLER FINISH Natural Brass, Chrome SPRINKLER FINISH Natural Brass, Chrome
Plated, Pure White, Plat d, Pure White,
Signal White Signal White-

BULB 3mm,Smm BULB 3mm,smm

ZSTX ZSTDY
PENDENT PENDENT CONCEALED
Physical Characteristics I< FACTOR k=5.6 (SO,6)' k=.8.0 (115.2) PhysiC.-1 ChaF<1lcteristics K FACTOR k=5.6 (80,6)
frame .•...•.•.......•.....•.......... Bronze Frame Bronze
Button Brass/Copper THREAD SIZE 112" R• 3/4" R Support Cup ...•....••... Chrome Plated Steel HREAD SIZE 1 /2- R
Bulb ••. , ..•.....•....••.......•....... "Glass 1/2" NPT ·3/4" NPT Guide Pins.. . Stain I ss Steel l/2"NPT
Compression Screw ....•............... Bronze Deflector 00 Bronze
Deflector ..•••...••.•..••••..••••..•••. Copper APPROVALS CCCF,IS09001,15014001 Compression Screw ..••••...•••....•••..• Brass APPROVALS CCCF,IS09001,15014001
Se litlg~s mbly ........ Nkl<etAlloywlTefion Bulb •..•••.....•..........••....•••...•• Glass
Or NBR O-Ring TEMPERATURE 13S'iF/S7"C, 15soF/6S"C, Cap... . . ... . .. Bronze or Copper TEMPERATURE 15SoF/68·c.spfinkl r
, 75"f/79·C, 200"f/93°C, Cover Plate. .••....•••...•••...••••..•••. Brass 139"f/59°c - cover Plate,
Maximum Working Pressure 286'F!141"C,36<r'F/18rC Retainer Bra ss 2000F/93"c - sprinkler
175 psi (12,1 bar) Sealing Assembly Nickel AI10y w/Teflon 16soF174°c • cover Plat
SPRINKLER FINISH Natural Brass, Chrome Or NBR O-Ring
Plated, Pure White, PLATE FINISH chrome, Bru heel chrome,
Signal White Maximum Working Pressure Brass, signal Whit ,Grey
175 psi {1 2,1 bar) White-, Jet Black, custom
BULB 3mm,Smm
BUL8 3mm,Smm

a:
w ZSTBS YZST
....I
::.:::
HORIZONTAL SIDEWALL UPRIGHT & PENDENT
Physical Characteristlcs KfACTOR k=5.6(80,6). k=-B.O (115,2) Physkal Characteristics KFACTOR k=5.6 (80,6)

~ fl'ame
Sutton.
....••.••............•..•.•.....
. ... . ...... Brass/Copper
Bronz
THREAD SIZE 1 /2" R• 3/4' R
Frame ....•.......................••...
Strut......... .
Brass
Monel THREAD SIZE 1/2" R
> Bulb •....••...•••....•.•.....•.........• Glass 1/2" NPT ·3/4" NPT Deflector Bronze 112" NPT
«
a:
Compression
DeRector
5<:rew ....•••...•••...•••. Bronze
Copper APPROVALS CCCF,IS09001,IS014001
Hook
Fusible Element
Bronze/Monel
Brass.Altoy APPROVALS CCCF,IS09001,ISOl4()01

a.. Sealing Assembly Nicket Alloy w/Teflon

Or NBR O-Ring TEMPERATURE 135"f/57°C, 155°f/68°C,
Sealinq Assembly ......•. Nickel Alloy wITeflon
Or NBRO-Ring EMPERA URE 161.6°F172·c

'"a:C Maximum
175 psi (12,1
Working
bar)
Pressure
17S"f/7goC,200°F/93"C,
286C1iF!141oc. 360"F/18l"C Maximum
175 psi (12,1
Working
bar)
Pressure FINISH chrome plated

«
c
SPRINK ER FINISH N Mal
Plated.
Bras,
Pure
Chrome
White-,

z Signal White

« BULB 3mm,Smm

ti;1
I
MAFCO

MAFCO
MAFCO

MAFCO
MAFCO

MAFCO
MAFCO

MAFCO
MAFCO

MAFCO
MAFCO

MAFCO
MAFCO

MAFCO
MAFCO

MAFCO
MAFCO

MAFCO
 MAFCO

MAFCO

CO2 SYSTEM

DESIGN, INSTALLATION & MAINTENANCES

DESCRIPTION
Carbon dioxide or CO2 is a colorless, odorless, electrically non-
conductive gas that is highly efficient as a fire suppression
agent. MAFCO fire protection systems use intelligent, reliable and fast-
acting control panels to quickly sense a fire before it can cause damage to
property. Carbon dioxide gas has a high rate of expansion, which allows
a CO2 fire protection system to work fast.

TYPICAL APPLICATIONS
• Electrical rooms or areas

• generator rooms or area

• Liquid storage areas

• Quench tanks

• Mixing operations

• Spray booths

• Turbine-driven generators

• Dust collectors

• Engine rooms
 When applied to a fire, CO2 provides a heavy blanket of gas that
reduces the oxygen level to a point where combustion cannot occur. Since
carbon dioxide is a gas, there is no clean-up associated with a MAFCO
CO2 fire suppression system discharge. That means minimal interruption
to your business. In fact, the cost of clean-up and peripheral damage
associated with water sprinkler systems, foam systems and dry chemical
agents can exceed the costs associated with the actual fire damage.

In addition, MAFCO can provide the complete design, installation,

maintenances & system components and accessories to meet your
complete clean agent fire suppression system requirements. Intelligent
control panels, delayed action devices, early warning smoke detection,
warning signs, manual releasing devices, automatic detection and warning
devices and fire alarm panels.
FEATURES
• Quick Opening and Full Flow Discharge.

• Discharges in 10 seconds or less, extinguishing a fire quickly and

effectively.

• No mechanical jam.

• Doesn’t require costly clean-up, unlike other fire protection

systems.

• Multiple actuation.

• Simple design for easy installation

• Resettable actuation device – Reduced reload cost

 HFC 227ea
CLEAN AGENT
FIRE SUPPRESSION
SYSTEM
FM 200 SYSTEM
DESIGN, INSTALLATION & MAINTENANCES

MAFCO
MAFCO
FIRE SUPPRESSION SYSTEM – FM 200
Description
FM200 (HFC 227ea) is known chemically as Heptafluoropropane.
FM20 is a colorless gas which is liquefied under pressure for storage and
environmentally friendly fire suppression agent that is electrically non-
conductive and safe for humans. For speed in suppressing fires, reducing
damages, saving on floor space and allowing visibility, MAFCO is the clear
choice. Our Clean Agent Gas Under Certified by UL.

Typical Applications
• Computer rooms

• Telecommunication centres

• Records and data archives

• Testing / imaging equipment

• Chemical laboratories

• Control rooms

• Flammable liquid storage

• Robotic equipment

• Electric utility facilities

• Media storage

• Military vehicles
 In addition, MAFCO can provide the complete design, installation, maintenances &
system components and accessories to meet your complete clean agent fire suppression
system requirements. Intelligent control panels, delayed action devices, early warning smoke
detection, warning signs, manual releasing devices, automatic detection and warning devices
and fire alarm panels.

FEATURES
• Quick Opening and Full Flow Discharge.
• Discharges in 10 seconds or less, extinguishing a fire quickly and effectively.
• No mechanical jam.
• Doesn’t require costly clean-up, unlike other fire protection systems.
• Multiple actuation.
• Simple design for easy installation
• Resettable actuation device – Reduced reload cost

CLEAN AGENT PROTECTS VALUABLE ASSETS

When protecting valuable assets or sensitive equipment, HFC 227ea agent stands
above conventional agents. Unlike dry chemical, HFC 227ea is a colourless, odourless
gas that leaves no residue to clean up. Unlike water, HFC 227ea is an electrically
nonconductive agent that will not short-out electronic equipment. And unlike the very
cold discharge of carbon dioxide, HFC 227ea will not thermally shock delicate circuitry.
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

Customer MAZEN Abdulsalam jadid factory (MAFCO)

Location Industrial Area-3, Jeddah
Customer Statement Info SO-MIC103975-20210906-1210997
Product FIRE PUMPS
Brand MAFCO
Model No See Model Table (Page 66)
Technical Specification 220V/380VA, 60Hz,70.1/40.5A, 30HP, 390 GPM , 7BAR, IP65, 22KW
Country of Mfr. Saudi Arabia
Request Date Oct 13, 2021
Start date Oct 17, 2021
Test End Date Dec 16, 2021
MOCI Directive 267
Test Method IEC 60034-1
SASO GSO IEC 60529
NFPA 20

Test Results:

Result:  CONFORM
Remarks: -(NFPA 20) Standard for the Installation of Stationary Pumps for Fire Protection
(2019Edition)
- We witnessed Hydrostatic Tests in the factory for pump model 390 GPM (1476L/MIN)

Authorized Signatories:

ABDALLA GHAREB
Technical Manager

- Test results are found on the succeeding pages.

- Test with “*” denotes non-accredited tests. Test with “**” denotes subcontracted tests.
- Test Report relates only to the item(s) tested on specified Standard Test Method(s) and specific clause(s).
- Test Report shall not be reproduced, except in full, without written approval of EPTL, Motabaqah.
- Unless requested for return, Test Item(s) are destroyed and discarded 90 days after Test Report Date.
- Test conducted may form into unusable and dangerous item(s). Motabaqah, EPTL do not assume liability
resulting from the use of the returned item(s).
- The lab performed test as per customer request without any responsibilities as agreed, some tests were
performed at factory with our calibrated equipment as per customer agreement.

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 1 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

Clause Test Description Analysis Result

(NFPA 20) Standard for the Installation of Stationary Pumps for Fire Protection (2019 Edition)
4.1 Pumps PASS
This standard shall apply to centrifugal single stage and
multistage pumps of the horizontal or vertical shaft design
Complied P
and positive displacement pumps of the horizontal or
vertical shaft design.
4.2.2 The pump manufacturer or its authorized representative PROVIDED BY
shall be given complete information concerning the liquid MAFCO
P
and power supply characteristics.
A complete plan and detailed data describing pump, PROVIDED
driver, controller, power supply, fittings, suction and Detailed Data By
4.2.3 P
discharge connections, and liquid supply conditions shall MAFCO
be prepared for approval.
Plans shall be drawn to an indicated scale, on sheets of
uniform size, and shall indicate, as a minimum, the items
4.2.3.1 Complied P
from the following list that pertain to the design of the
system:
MAZEN
(1) Name(s) of owner and occupant Abdulsalam jadid P
factory (MAFCO)
(2) Location, including street address Industrial Area-3,
Jeddah Saudi P
Arabia
(3) Point of compass None NA
(4) Name and address of installing contractor None NA
(5) Pump make and model number MAFCO
MODEL / MAF 350 P
DJE
(6) Pump rating _______ gpm @ _____ psi ______ rpm 220/380 V, 60Hz,
22 KW, 350 GPM
P
@, 7 BAR, 3450
Rpm
(7) Suction main size, length, location, type and class/ 90m3/h, 89m, NT
P
65-200/205,W1
Comply As Per
(8) Water storage tank, if applicable NA
Nfpa20
(9) Size and type of valves, regulators, meters, and valve Comply As Per
pits, Nfpa20 P
if applicable
(10) Water supply information including the following flow No water supply
NA
test information, if applicable: (only pumps)
(a) Location and elevation of static and residual test
Provided P
gauge with relation to the elevation reference point
(b) Flow location Provided labelled P

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 2 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

in the chassis
(c) Static pressure, psi (bar) As Per Site
P
Conditions
(d) Residual pressure, psi (bar) As Per Pump
P
Range
(e) Flow, gpm (L/min) As Per Pump
P
Range
(f) Date Provided P
(h) Name of person who conducted the test or supplied Qc Department /
NA
the information Pump Department
(i) Other sources of water supply, with pressure or In Instruction
P
elevation manual
(11) Other sources of water supply, with pressure or In Instruction
NA
elevation manual
(12) Pump driver details including manufacturer and MAF 350 D J E ,
P
horsepower MAFCO, 50 HP
(13) Voltage for electric motor–driven pumps 220/380 Volt P
(14) Fuel system details for diesel-driven pumps Diesel driven
P
pumps
(15) Controller manufacturer, type, and rating RAL 7032, IP 65 P
(16) Suction and discharge pipe, fitting, and valve types Comply
(Contractors/
Purchaser Scope P
To Comply With
Nfpa20)
(17) Test connection piping and valves Provided from the
P
factory
(18) Flow meter details, if applicable Digital Flow Meter P
(19) Pressure maintenance pump and controller
Not applicable NA
arrangement including sensing line details, if applicable
Each pump, driver, controlling equipment, power supply
and arrangement, and liquid supply shall be approved by
4.2.4 Approved P
the authority having jurisdiction for the specific field
conditions encountered.
4.3 Pump Operation PASS
Means shall be provided for qualified personnel to
4.3.1 determine that the fire pump is operating in a satisfactory Complied P
manner during pump operation.
4.3.2 System Designer MAFCO P
The system designer shall be identified on the system
4.3.2.1 Provided P
design documents.
Acceptable minimum evidence of qualifications or
4.3.2.2 certification shall be provided when requested by the P
Complied
authority having jurisdiction
Qualified personnel shall include, but not be limited
4.3.2.3 Complied P
to, one or more of the following:

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 3 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

(1)Personnel who are factory trained and certified for fire

pump system design of the specific type and brand of Complied P
system being designed
(2)Personnel who are certified by a nationally recognized
fire protection certification organization acceptable tothe Provided P
authority having jurisdiction
(3) Personnel who are registered, licensed, or certified by
Provided P
a state or local authority
Additional evidence of qualification or certification shall be
4.3.2.4 permitted to be required by the authority having Provided P
jurisdiction.
4.3.3 System Installer. Provided P
Installation personnel shall be qualified or shall be
supervised by persons who are qualified in the
4.3.3.1 Provided P
installation, inspection, and testing of fire protection
systems.
Minimum evidence of qualifications or certification shall
4.3.3.2 be provided when requested by the authority having Provided P
jurisdiction.
Eng.Nazeer
Qualified personnel shall include, but not be limited
4.3.3.3 Eng.Ameen P
to, one or more of the following:
Mansoor
(1) Personnel who are factory trained and certified for fire
pump system installation of the specific type and brand of Provided P
system being designed
(2) Personnel who are certified by a nationally recognized
fire protection certification organization acceptable to the Provided P
authority having jurisdiction
(3) Personnel who are registered, licensed, or certified by
Provided P
a state or local authority
Additional evidence of qualification or certification shall be
4.3.3.4 permitted to be required by the authority having Provided P
jurisdiction.
Eng.Nazeer
4.3.4 Service Personnel Qualification and Experience. Eng. Ameen P
Mansoor
Service personnel shall be qualified and experienced in
the inspection, testing, and maintenance of fire protection By Motabaqah /
4.3.4.1 P
in the inspection, testing, and maintenance of fire MAFCO Factory
protection systems.
Qualified personnel shall include, but not be limited Comply As Per
4.3.4.2 P
to, one or more of the following: Nfpa20
(1) Personnel who are factory trained and certified for fire
pump system servicing of the specific type and brand of Engr.Nazeer P
system being designed

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 4 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

(2)* Personnel who are certified by a nationally

recognized fire protection certification organization Eng.Ameen P
acceptable to the authority having jurisdiction
(3) Personnel who are registered, licensed, or certified by
Yes / HCIS P
a state or local authority
(4) Personnel who are employed and qualified by an
organization listed by a nationally recognized testing Yes P
laboratory for the servicing of fire protection systems
4.3.4.3 Additional evidence of qualification or certification shall be
permitted to be required by the authority having P
provided
jurisdiction.
4.4 Fire Pump Unit Performance. provided P
4.4.1 The fire pump unit, consisting of a pump, driver, and
controller, shall perform in compliance with this standard
P
as an entire unit when installed or when components have Provided
been replaced.
The complete fire pump unit shall be field acceptance
Acceptance Test
4.4.2 tested for proper performance in accordance with the P
Were Provided
provisions of this standard. (See Section 14.2.)
A single entity shall be designated as having responsibility MAFCO Will be
for acceptable unit performance of the pump, driver, responsible for the
N 4.4.3 P
controller, and transfer switch equipment as required by complete testing of
this standard. pump units.
4.5 Certified Shop Test. PASS
Certified shop test curves showing head capacity and
4.5.1 brake horsepower of the pump shall be furnished by the Provided P
manufacturer to the purchaser.
For water mist positive displacement pumping units,
certified shop test data, including flow, pressure, and
4.5.1.1 - P
horsepower, shall be provided for each independent
pump.
For a multistage multiport pump, certified shop test data
4.5.1.2 that include flow, pressure, and horsepower shall be - P
provided for each outlet.
For water mist positive displacement pumping units,
certified shop test data, including flow, pressure, and
4.5.1.3 - P
horsepower, shall also be provided for the fire pump unit
with variable speed features deactivated.
The certified fire pump unit shop test data shall be
4.5.1.3.1 developed by activating the individual fire pumps in the Comply P
same operating sequence that the controller will utilize.
For water mist positive displacement pumping units with
variable speed features, certified shop test data, including
4.5.1.4 Provided P
flow, pressure, and horsepower, shall also be provided for
the fire pump unit with variable speed features activated.

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 5 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

The certified fire pump unit shop test data shall be

Developed and
4.5.1.4.1 developed by activating the individual fire pumps in the P
provided
same operating sequence that the controller will utilize.
For self-regulating variable speed fire pump units, two
additional certified test curves showing the flow, net
N 4.5.1.5 Provided P
pressure, power, and speed shall be provided for each
pump operating under the following conditions:
(1)In self regulating variable speed mode with the pump
unit operating at constant discharge pressure, as
measured by the discharge pressure transducer, through
Provided P
the design duty, and all flow rates from churn beyond 150
percent of rated flow until the maximum power draw is
reached
(2) In self-regulating variable speed mode with the pump
unit operating at constant boost pressure through the
design duty, and all flow rates from churn beyond 150 Provided P
percent of rated flow until the maximum power draw is
reached.
The purchaser shall furnish the data required in 4.5.1 to
4.5.2 Provided P
the authority having jurisdiction
4.6 Liquid Supplies PASS
4.6.1 Reliability. Complied P
The adequacy and dependability of the water source are
4.6.1.1 of primary importance and shall be fully determined, with Fully determined P
due allowance for its reliability in the future.
Where a water flow test is used to determine the
adequacy of the attached water supply, the test shall have
4.6.1.2 been completed not more than 12 months prior to the Provided P
submission of working plans, unless otherwise permitted
by the authority having jurisdiction.
4.6.2* Sources. Provided P
Any source of water that is adequate in quality, quantity,
4.6.2.1 and pressure shall be permitted to provide the supply for Provided P
a fire pump.
Where the water supply from a public service main is not
4.6.2.2 adequate in quality, quantity, or pressure, an alternative
Provided P
water source shall be provided.
The adequacy of the water supply shall be determined Comply
4.6.2.3 and evaluated prior to the specification and installation of (Contractors/
P
the fire pump. Purchaser Scope )
Where the maximum flow available from the water
supply main cannot provide a flow of 150 percent of the
rated flow of the pump at the lowest permissible suction P
4.6.2.3.1* Provided
pressure, but the water supply can provide the greater of
100 percent of rated flow or the maximum flow demand
of the fire protection system(s) at the lowest permissible

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 6 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

suction pressure, the water supply shall be deemed to be

adequate
The available flow at the fire pump discharge at the
(contractors/
4.6.2.3.2 Lowest permissible suction pressure shall be a minimum P
purchaser scope )
of 100 percent of rated flow.
The available flow and pressure at the fire pump
4.6.2.3.3 discharge shall be adequate to meet the maximum fire Provided P
protection demand.
For liquids other than water, the liquid source for the
pump shall be adequate to supply the maximum required
4.6.2.4 Provided P
flow rate for any simultaneous demands for the required
duration and the required number of discharges.
4.6.3 Level P
The minimum water level of a well or wet pit shall be
determined by pumping at not less than 150 percent of Complied P
the fire pump rated capacity
4.6.4 Stored Supply. Complied P
A stored supply plus reliable automatic refill shall be
4.6.4.1 sufficient to meet the demand placed upon it for the Complied P
design duration.
A reliable method of replenishing the supply shall be
4.6.4.2 Complied P
provided.
4.6.5 Head. Complied P
Except as provided in 4.6.5.2, the head available from a
4.6.5.1 water supply shall be figured on the basis of a flow of 150 Complied P
percent of rated capacity of the fire pump
Where the water supply cannot provide a flow of
150 percent of the rated flow of the pump at the lowest
permissible suction pressure, but the water supply can
provide the greater of 100 percent of the rated flow or
4.6.5.2 the flow demand of the fire protection system(s) at the Complied P
lowest permissible suction pressure, the head available
from the water supply shall be permitted to be calculated
on the basis of the maximum flow available at the lowest
permissible suction pressure.
The head described in 4.6.5.1 and 4.6.5.2 shall be as
4.6.5.3 Tested P
indicated by a flow test.
4.7 Pumps, Drivers, and Controllers. PASS
Fire pumps shall be dedicated to and listed for fire
4.7.1 Complied P
protection service.
Acceptable drivers for pumps at a single installation shall
4.7.2 be electric motors, diesel engines, steam turbines, or a Electric P
combination thereof.
Complied one
4.7.3 A pump shall not be equipped with more than one driver. P
driver
Each fire pump shall have its own dedicated driver unless
4.7.4 Complied p
otherwise permitted in 8.6.3.1.

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 7 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

Each driver or water mist positive displacement pumping

4.7.5 Complied P
unit shall have its own dedicated controller.
The driver shall be selected in accordance with 9.5.2
(electric motors), 11.2.2 (diesel engines), or 13.1.2
4.7.6* (steam turbines) to provide the required power to operate Complied
P
the pump at rated speed and maximum pump load under
any flow condition.
4.7.7 Maximum Pressure for Centrifugal Pumps. Complied P
The net pump shutoff (churn) pressure plus the maximum
static suction pressure, adjusted for elevation, shall not
4.7.7.1 Complied P
exceed the pressure for which the system components
are rated.
Pressure relief valves and pressure-regulating devices in
4.7.7.2 the fire pump installation shall not be used as a means to Complied P
meet the requirements of 4.7.7.1.
4.7.7.3 Variable Speed Pump. - NA
Variable speed pumps, as defined in this standard, shall
4.7.7.3.1 - NA
be acceptable to limit system pressure.
The set pressure plus the maximum pressure variance
during variable speed operation and adjusted for
4.7.7.3.2 - NA
elevation shall not exceed the pressure rating of any
system component.
4.8 Self-Regulating Variable Speed Fire Pump Units. PASS
Each variable speed self-regulating control unit shall
4.8.1 maintain the factory-certified test data for variable speed fixed RPM only
N/A
operating conditions.
A self-regulating variable speed fire pump unit shall be fixed RPM only
4.8.2 N/A
factory assembled and listed as unit
Each self-regulating variable speed fire pump unit shall be fixed RPM only
4.8.3 provided with an across-the-line fire pump controller in
N/A
accordance with Chapter 10.
When alternate power is provided for the pump, an fixed RPM only
across-the-line combination fire pump controller/transfer
4.8.4 N/A
switch designed and installed in accordance with Chapter
10 shall be provided.
As a minimum, each variable speed drive control unit shall fixed RPM only
be provided in a National Electrical Manufacturers
4.8.5
Association (NEMA), Type 4, and watertight enclosure N/A
with an ingress protection (IP) rating of IP66.
Each self-regulating variable speed fire pump unit shall be fixed RPM only
4.8.6 provided with a minimum of 5 percent line reactance on
N/A
the input
The current rating of the variable frequency drive (VFD)
4.8.7 shall not be exceeded when operating in the motor
N/A
service factor. fixed RPM only
Self-regulating variable speed fire pump units shall
4.8.8
monitor the suction pressure, discharge pressure, the fixed RPM only N/A

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 8 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

power draw, and the calculated flow rate and provide a

supervisory alarm signal to the controller whenever the
results do not match the design curve of the unit.
Self-regulating variable speed fire pump units shall
monitor the variable speed drive and provide a
4.8.9 supervisory alarm signal to the controller whenever any fixed RPM only
N/A
of the following
conditions occur:
(1) Pump run fixed RPM only N/A

(2) High temperature fixed RPM only

N/A
(3) Overcurrent fixed RPM only N/A
(4) Overvoltage fixed RPM only N/A
(5) Undervoltage fixed RPM only N/A
(6) Ground fault fixed RPM only N/A
(7) Phase loss fixed RPM only N/A
(8) Set pressure not met fixed RPM only N/A
(9) Overpressure - N/A
(10) Bypass mode - N/A
Remote contacts that close to indicate an alarm shall be
4.8.9.1 - N/A
provided for connection to the controller.
A self-regulating variable speed fire pump unit shall have
a visible display panel capable of showing, as a minimum,
set pressure, maximum permissible power draw, all
4.8.10 - N/A
phase-to phase voltages, all phase amperages, boost
pressure, calculated rpm, calculated flow, alerts, and
faults with an accuracy within ±2 percent.
Suction and discharge transducers for self-regulating
variable speed fire pump units shall be provided and
4.8.11 -
protected N/A
From mechanical damage.
Self-regulating variable speed fire pump units shall
4.8.12 capture and maintain all operating information for a - N/A
minimum of 2 years.
minimum clear working space in accordance with
4.8.13 110.26(A)(1) of NFPA 70 shall be provided for the pump, -
N/A
variable speed driver, and self-regulating control unit.
The unit shall have no resonant first-order harmonic
critical speed below 120 percent of maximum operating
4.8.14
speed in either self-regulating or manual operator mode, - N/A
whichever is greater.
Means shall be provided on each self-regulating variable
4.8.15
speed fire pump unit to field adjust the set pressure. N/A
-
The adjustment shall be secured by password protection
4.8.15.1 -
or other equivalent means. N/A
201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 9 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

When operating under no-flow conditions, each self-

regulating variable speed fire pump unit shall operate at
4.8.16 -
a speed that provides at least 25 percent of its rated N/A
pressure.
Within 20 seconds after a demand to start, pumps shall
4.8.17 supply and maintain a stable discharge pressure (•}10 -
N/A
percent) Throughout the entire range of operation.
4.8.18 All motor-starting contactors shall comply with 10.4.5.1. -
N/A
An automatic bypass shall be provided in accordance with
4.8.19 -
10.10.3 and 10.10.4.2. N/A
An emergency-run mechanical control shall be provided
4.8.20 -
in accordance with 10.5.3.2. N/A
Circuit protection shall be provided in the VFD path in
4.8.21 -
accordance with 10.10.5. N/A
The assembly shall be marked with the short-circuit
4.8.22 -
current rating. N/A
Local control shall be in accordance with 10.10.7.1 and
4.8.23 -
10.10.7.3. N/A
The maximum operating frequency shall not exceed line
4.8.24 -
frequency. N/A
4.9 Multistage Multiport Pump. PASS
Multistage multiport fire pumps shall be installed in Only using single
4.9.1 NA
accordance with this standard. port pump
A shutoff valve shall not be required between the Only using single
4.9.2 NA
impellers of a multistage multiport pump. port pump
4.10 Centrifugal Fire Pump Capacities. PASS
A centrifugal fire pump for fire protection shall be selected
so that the greatest single demand for any fire protection
4.10.1 Complied P
system connected to the pump is less than or equal to
150 percent of the rated capacity (flow) of the pump.
Centrifugal fire pumps shall have one of the rated
4.10.2 capacities in gpm (L/min) identified in Table 4.10.2 and Complied
P
shall be rated at net pressures of 40 psi (2.7 bar) or more.
Centrifugal fire pumps with ratings over 5000 gpm
(18,925 L/min) shall be subject to individual review by
4.10.3 Complied
either the authority having jurisdiction or a listing P
laboratory.
4.11 Nameplate. PASS
4.11.1 Pumps shall be provided with a nameplate. Complied P
The name plate shall be made of and attached using
4.11.2 Complied P
corrosion resistant material.
The nameplate shall indicate the maximum pump
horsepower demand required to power the pump at any
4.11.3 Complied P
flow, including flows beyond 150 percent of the rated
capacity.
4.12 Pressure Gauges. PASS

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 10 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

4.12.1 Discharge Complied P

A pressure gauge having a dial not less than 3.5 in.
(89 mm) in diameter shall be connected near the
4.12.1.1 Complied P
discharge casting with a nominal 0.25 in. (6 mm) gauge
valve.
The dial shall indicate pressure to at least twice the
4.12.1.2 rated working pressure of the pump but not less than 200 Complied P
psi (13.8 bar)
The face of the dial shall read in bar, pounds persquare
4.12.1.3 inch, or both with the manufacturer's standard dial read in bar P
graduations.
4.12.2 Suction. Complied P
Unless the requirements of 4.12.2.4 are met, a gauge
having a dial not less than 3.5 in. (89 mm) in diameter
4.12.2.1 Complied P
shall be connected to the suction pipe near the pump with
a nominal 0.25 in. (6 mm) gauge valve.
Where the minimum pump suction pressure is below 20
4.12.2.1.1 psi (1.3 bar) under any flow condition, the suction gauge Complied P
shall be a compound pressure and vacuum gauge.
The face of the dial shall read in inches of mercury Complied
4.12.2.2 P
(millimeters of mercury) or psi (bar) for the suction range.
The gauge shall have a pressure range two times the Complied
4.12.2.3 P
rated maximum suction pressure of the pump. 0-30 bar
The requirements of 4.12.2 shall not apply to vertical
4.12.2.4 shaft turbine–type pumps taking suction from a well or Not applicable
NA
open wet pit.
4.13 Circulation Relief Valve. PASS
4.13.1 General Requirements. Complied P
Where an electric variable speed pump is installed, the
4.13.1.1 automatic circulation relief valve shall open at the P
Complied
minimum speed.
Unless the requirements of 4.13.1.8 are met, each
pump(s) shall have an automatic relief valve listed for the
4.13.1.2 Complied P
fire pump service installed and set below the shutoff
pressure at minimum expected suction pressure.
The valve shall be installed on the discharge side of the
4.13.1.3 Installed P
pump before the discharge check valve.
For multistage multiport pumps, the automatic circulation
relief valve shall be installed before the discharge check
4.13.1.3.1 Complied P
valve for the last port and set below the churn pressure
of the first port.
The valve shall provide sufficient water flow to prevent
4.13.1.4 the pump from overheating when operating with no Complied P
discharge.
4.13.1.5 Provisions shall be made for discharge to a drain. Complied P
Circulation relief valves shall not be tied in with the
4.13.1.6 Complied P
packing box or drip rim drains.

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 11 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

The automatic relief valve shall have a nominal size of

0.75 in. (19 mm) for pumps with a rated capacity not
4.13.1.7 exceeding 2500 gpm (9462 L/min) and have a nominal Complied P
size of 1 in. (25 mm) for pumps with a rated capacity of
3000 gpm to 5000 gpm (11,355 L/min to 18,925 L/min).
The requirements of 4.13.1 shall not apply to engine
4.13.1.8 driven pumps for which engine cooling water is taken Complied p
from the pump discharge.
4.14 Equipment Protection. IP55 P
4.14.1 General Requirements. Complied P
The fire pump, driver, controller, water supply, and power
supply shall be protected against possible interruption of
service through damage caused by explosion, fire, flood, IP55 P
earthquake, rodents, insects, windstorm, freezing,
vandalism, and other adverse conditions.
4.14.1.1 Indoor Fire Pump Units. Complied P
Except as permitted in 4.14.1.1.3, fire pump units serving
high-rise buildings shall be protected from surrounding
4.14.1.1.1 occupancies by a minimum of 2-hour fire-rated Complied P
construction or physically separated from the protected
building by a minimum of 50 ft (15.3 m).
Except as permitted in 4.14.1.1.3, indoor fire pump rooms
in non-high-rise buildings or in separate fire pump
4.14.1.1.2 buildings shall be physically separated or protected by Complied
P
fire-rated construction in accordance with Table
4.14.1.1.2.
Fire pump units supplying a local application fire
Protection system(s) shall be physically separated from
4.14.1.1.3 the hazard being protected in a manner that will prevent Complied P
a fire associated with the hazard from directly exposing
the pumping unit.
The location of and access to the fire pump room shall be
4.14.1.1.4 Complied P
preplanned with the fire department.
Except as permitted in 4.14.1.1.6, rooms containing fire
pumps shall be free from storage, equipment, and
4.14.1.1.5 Complied P
penetrations not essential to the operation of the pump
and related components.
Equipment related to domestic water distribution shall be
4.14.1.1.6 permitted to be located within the same room as the fire Complied P
pump equipment.
The pump room or pump house shall be sized to fit
4.14.1.1.7 all of the components necessary for the operation of the Complied P
fire pump and to accommodate the following:
(1) Clearance between components for installation and
at instruction P
maintenance
(2) Clearance between a component and the wall for
at instruction P
installation and maintenance

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 12 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

(3) Clearance between energized electrical equipment

Complied P
and other equipment in accordance with NFPA 70
(4) Orientation of the pump to the suction piping to allow
at instruction P
compliance with 4.16.6.3
4.14.1.2 Outdoor Fire Pump Units.
Fire pump units that are outdoors shall be located at least
4.14.1.2.1 50 ft (15.3 m) away from any buildings and other fire Complied P
exposures.
Outdoor installations shall be required to be provided with
4.14.1.2.2 protection against possible interruption in accordance IP55 P
with 4.14.1.
4.14.1.2.3 Fire Pump Buildings or Rooms with Diesel Engines. Complied P
Fire pump buildings or rooms enclosing diesel engine
pump drivers and day tanks shall be protected with an
Complied P
automatic sprinkler system installed in accordance with
NFPA 13 as an Extra Hazard Group 2 occupancy.
4.14.1.4 Fire Pump Buildings or Rooms with Electric Drivers. P
For buildings that are required to be sprinkle red, fire
pump buildings or rooms enclosing electric fire pump
drivers shall be protected with an automatic sprinkler Complied P
system installed in accordance with NFPA 13 as an
Ordinary Hazard Group 1 occupancy.
4.14.2 Equipment Access. Complied P
The location of and access to the fire pump room(s) shall
4.14.2.1 Complied P
be pre-planned with the fire department.
Except as provided in 4.14.2.1.1.1, fire pump rooms not
directly accessible from the outside shall be accessible
4.14.2.1.1 Complied P
through a fire-resistant-rated corridor from an enclosed
stairway or exterior exit
Fire pump units supplying only local application fire
protection systems shall be accessible by a path that is
4.14.2.1.1.1 Complied P
not subject to exposure from a fire in any hazard
protected by the fire pump.
Where a fire pump is installed in a parking garage or some
other portion of a building separated from the rest of the
building by fire-rated construction equivalent to the pump
4.14.2.1.1.2 room, and the portion of the building containing the fire Instruction P
pump is protected by a sprinkler system that does not rely
on the fire pump, the protected access to the pump room
shall not be required.
The portions of the building needed for the access, as
required by 4.14.2.1.1, shall have a fire resistance rating
4.14.2.1.2 Instruction P
not less than the fire resistance rating of the fire pump
room.
4.14.3 Heat. Complied P

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 13 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

An approved or listed source of heat shall be provided for

+5°C and +40°C
4.14.3.1 maintaining the temperature of a pump room or pump P
(41°F-104°F)
house, where required, above 40°F (4°C)
The requirements of 11.6.5 shall be followed for higher
4.14.3.2 temperature requirements for internal combustion Complied P
engines.
4.14.4 Normal Lighting. Complied P
Artificial light shall be provided in a pump room or pump
Instruction P
house.
4.14.5 Emergency Lighting. Not applicable NA
4.14.5.1 Pump rooms shall be provided with emergency lighting. Instruction P
The intensity of illumination in the pump room(s) shall be
3.0 ft-candles (32.3 lux), unless otherwise specified by a Complied
4.14.5.2 P
requirement recognized by the authority having
jurisdiction.
Emergency lights shall not be connected to an
4.14.5.3 Complied P
engine-starting battery
The emergency lighting shall be capable of maintaining Complied P
4.14.5.4
the lighting level for a minimum of 2 hours. 2h
4.14.6 Ventilation. Complied P
Provision shall be made for ventilation of a pump room or
Complied P
pump house.
4.14.7 Drainage. Complied P
Floors shall be pitched for adequate drainage of escaping
4.14.7.1 water away from critical equipment such as the pump, Complied P
driver, controller, and so forth.
4.15 Pipe and Fittings. PASS
4.15.1 Steel Pipe. Steel P
Flanges and P
4.15.2 Joining Method.
threads
4.15.3 Restricting Orifice Identification. Complied P
4.15.4 Concentrate and Additive Piping Complied P
4.15.5 Drain Piping. Complied P
4.15.6 Piping, Hangers, and Seismic Bracing. Complied P
4.15.7 Cutting and Welding. Complied P
4.16 Suction Pipe and Fittings. Complied P
4.16.1 Components. Complied P
4.16.2 Installation Complied P
4.16.3 Suction Size. Complied P
4.16.4 Pumps with Bypass Complied Complied
4.16.5 Valves. Complied Complied
4.16.5.2 Valve Closure Time. Complied Complied
4.16.5.3 Automated Valves Complied P
4.16.6 Installation. Complied P
4.16.6.2 Freeze Protection. Complied P
4.16.6.3 Elbows and Tees. Complied P
4.16.6.4 Eccentric Tapered Reducer or Increaser. Complied P
201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 14 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

4.16.6.5 Strain Relief. Complied P

4.16.7 Multiple Pumps. Complied P
4.16.8 Suction Screening. Complied P
4.16.9 Devices in Suction Piping Complied P
No device or assembly, unless identified in 4.16.9.2, that
will stop, restrict the starting of, or restrict the discharge
4.16.9.1 Complied P
of a fire pump or pump driver shall be installed in the
suction piping.
The following devices shall be permitted in the suction
4.16.9.2 Complied P
piping where the following requirements are met:
(1) Check valves and backflow prevention devices and
assemblies shall be permitted where required by other
Complied P
NFPA standards or the authority having jurisdiction and
installed in accordance with Section 4.29.
2) Where the authority having jurisdiction requires
positive pressure to be maintained on the suction piping,
a pressure sensing line for a low suction pressure control, Complied P
specifically listed for fire pump service, shall be permitted
to be connected to the suction piping.
(3) Devices shall be permitted to be installed in the
suction supply piping or stored water supply and arranged
Complied P
to activate a signal if the pump suction pressure or water
level falls below a predetermined minimum.
(4) Suction strainers shall be permitted to be installed in
the suction piping where required by other sections of this Complied P
standard.
(5) A listed suction diffuser shall be permitted in the fire
Complied P
pump suction.
(6) Other devices specifically permitted or required by this
Complied P
standard shall be permitted.
4.16.10 Anti-Vortex Plate. - NA
4.18 Valve Supervision. PASS
4.18.1 Supervised Open Not applicable P
Where provided, the suction valve, discharge valve,
bypass valves, and isolation valves on the backflow
Complied P
prevention device or assembly shall be supervised open
by one of the following methods:
(1) Central station, proprietary, or remote station
NA
signaling service
(2) Local signaling service that will cause the sounding of
Complied P
an audible signal at a constantly attended point
(3) Locking valves open Complied P
(4) Sealing of valves and approved weekly recorded
inspection where valves are located within fenced Complied P
enclosures under the control of the owner
4.18.2 Supervised Closed. Complied P
4.19 Protection of Piping Against Damage Due to Movement. Complied P
201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 15 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

4.20 Relief Valves for Centrifugal Pumps. Complied P

4.20.1 General. Complied
Pressure relief valves shall be used only where specifically
4.20.1.1 Complied P
permitted by this standard.
Where a diesel engine fire pump is installed and where a
total of 121 percent of the net rated shutoff (churn)
pressure plus the maximum static suction pressure,
4.20.1.2 Complied P
adjusted for elevation, exceeds the pressure for which the
system components are rated, a pressure relief valve shall
be installed.
Where an electric variable speed pump or a diesel
pressure limiting driver is installed, and the maximum
total discharge head adjusted for elevation with the pump
4.20.1.3 Complied P
operating at shutoff and rated speed exceeds the
pressure rating of the system components, a pressure
relief valve shall be installed.
Where an electric variable speed pump or diesel
Pressure limiting driver is used, the pressure relief valve
Set Pressure = 7
4.20.1.3.1 shall be set to a minimum of 10 psi (0.68 bar) above the P
Bar
set pressure of the variable speed pressure limiting
control.
4.20.2 Size. Complied Complied
The relief valve size shall be determined by one of the
Complied P
methods specified in 4.20.2.1 or 4.20.2.2.
4.20.3 Location. Complied P
4.20.4 Type. Complied P
Pressure relief valves shall be either a listed spring loaded Listed Spring
4.20.4.1 P
or a pilot-operated diaphragm type. Loaded
4.20.5 Discharge. Complied P
4.20.6 Discharge Piping. Complied Complied
4.20.7 Discharge to Source of Supply Complied P
4.20.8 Discharge to Suction Reservoir. P
4.20.9 Shutoff Valve Complied Complied
4.21 Pumps Arranged in Series. Complied P
4.21.1 Series Fire Pump Unit Performance. Complied P
4.21.2 Series Fire Pump Unit Arrangement. Complied P
Pumps that are a part of a series fire pump unit shall
be permitted to be located in separate pump rooms where Complied P
all the following conditions are met:
(1) Each pump shall be arranged so that all pumps
Instruction
operating in series can be manually stopped or started P
provided
from all pump rooms housing the series fire pumps.
(2) The suction and discharge pressures from all pumps
Instruction
operating in series shall be displayed in all pump rooms P
provided
housing the series fire pumps.
(3) The alarms and signals shall be annunciated in the
Complied P
other pump rooms for all pumps that are a part of the
201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 16 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

series fire pump unit in accordance with 4.21.2.8 and

4.21.2.9.
(4) The interconnect control wiring between the
Instruction
controllers in different pump rooms shall comply with P
provided
4.21.2.8 and 4.21.2.9.
(5) A pump room communication system that shall Instruction
P
comply with 4.21.2.9 and 4.21.2.10. provided
Protection of Control Wiring for Series Fire Pump
4.21.2.8 Complied P
Units.
4.21.2.9 Status Signals for Series Fire Pump Units. Complied P
Audible and visual status signals shall be provided in each
4.21.2.9.1 pump room indicating the status of the associated series Complied P
pump(s) not located in the same pump room.
he following audible and visual signals shall be Complied P
4.21.2.9.1.1 provided in each pump room for each series electric fire
pump(s)
(1) Pump running in accordance with 10.4.7.2.1 Complied P
(2) Phase loss in accordance with 10.4.7.2.2 Complied P
(3) Phase reversal in accordance with 10.4.7.2.3 Complied P
(4) Controller connected to alternative source in
Complied P
accordance with 10.4.7.2.4
(5) Alternate circuit breaker open or tripped in accordance
Complied P
with 10.8.3.12.1
(6) Low suction pressure — suction pressure more than 10
psi (0.68 bar) below the design suction pressure on any Complied P
downstream series pump(s)
The following audible and visual signals shall be provided
4.21.2.9.1.2 Electric P
in each pump room for each series diesel fire pump(s).
(1) Pump running in accordance with 12.4.2.3(1) - NA
(2) Control switch in off or manual position in accordance
- NA
with 12.4.2.3(2)
(3) Trouble on controller or engine in accordance with
Complied P
12.4.2.3(3)
(4) Low suction pressure — suction pressure more than 10
psi (0.68 bar) below the design suction pressure on any - NA
downstream series pump(s)
4.21.2.10 Communications for Series Fire Pump Units. Complied P
4.22 Water Flow Test Devices. PASS
4.22.1 General. Complied P
4.22.2 Meters and Testing Devices. Complied P
4.22.3 Hose Valves. Complied P
4.22.3.1 General. Complied P
4.22.3.1.1 Hose valves shall be listed. Complied P
The number and size of hose valves used for pump testing
4.22.3.1.2 Fitted P
shall be as specified in Section 4.28.
4.22.3.1.3 Where outlets are being utilized as a means to test Complied P

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 17 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

the fire pump in accordance with 4.22.1.1, one of the

following methods shall be used:
(1)* Hose valves mounted on a hose valve header with
supply pipe sized in accordance with 4.22.3.4 and Section Complied P
4.28
(2) Wall hydrants, yard hydrants, or standpipe outlets of
Complied P
sufficient number and size to allow testing of the pump
4.22.3.2 Thread Type Complied P
Thread types shall be in compliance
Complied P
with one of the following:
(1) Hose valve(s) shall have the NH standard external
thread for the valve size specified, as stipulated in NFPA Complied P
1963.
(2) Where local fire department connections do not
conform to NFPA 1963 and the connection is to be utilized
Complied P
as a wall hydrant, the authority having jurisdiction shall
designate the threads to be used.
4.22.3.3 Location. Complied P
4.22.3.4 Pipe Size. Complied P
The pipe size shall be in accordance with one of the
Complied P
following methods:
(1) Where the pipe between the hose valve header and Complied P
the connection to the pump discharge pipe is over 15 ft
(4.5 m) in length, the next larger pipe size than that
required by 4.22.3.1.3 shall be used.
(2)* This pipe shall be permitted to be sized by hydraulic
calculations that match the actual test configuration and
that include the required pitot pressure and friction loss
for the total length of pipe and fire hose plus equivalent Not applicable NA
lengths of fittings, control valve, and hose valves, plus
elevation loss, from the pump discharge flange to the
discharge outlets.
4.23 Steam Power Supply Dependability. NA
4.23.1 Steam Supply. Not applicable NA
Careful consideration shall be given in each case to the
4.23.1.1 dependability of the steam supply and the steam supply Not applicable NA
system.
4.24 Shop Tests. Not applicable NA
4.24.1 General Not applicable NA
Each individual pump shall be tested at the factory to
provide detailed performance data and to demonstrate its Not applicable NA
compliance with specifications.
4.24.2 Preshipment Tests. Not applicable NA
4.25 Pump Shaft Rotation PASS
Pump shaft rotation shall be determined and correctly
specified when fire pumps and equipment involving that Complied P
rotation are ordered.

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 18 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

4.26 Other Signals PASS

Where required by other sections of this standard, signals
shall call attention to improper conditions in the fire pump Complied P
equipment.
4.27 Pressure Maintenance (Jockey or Make-Up) Pumps. PASS
For pressure-actuated fire pumps, a means to maintain Complied Complied
4.27.1 the pressure in the fire protection system shall be
provided in accordance with one of the following:
(1) A pressure maintenance (jockey) pump Complied P
(2) A water mist positive displacement pumping unit in
Complied P
accordance with 8.5.7.2
(3) Another approved means that is not the main fire
Complied P
pump
4.27.5 Excess Pressure. Complied P
Piping and Components for Pressure Maintenance
4.27.6 Complied P
Pumps.
4.28 Summary of Centrifugal Fire Pump Data. PASS
The sizes indicated in Table 4.28(a) and Table 4.28(b)
Complied P
shall be used as a minimum.
4.29 Backflow Preventers and Check Valves. PASS
4.29.2 Relief Valve Drainage. Complied P
4.29.3 Devices in Suction Piping. Complied P
4.29.4 Evaluation. Complied P
4.29.4.1 Backflow Prevention Device. Complied P
Table 4.28(a) Summary of Centrifugal Fire Pump Data
Complied P
(U.S. Customary)
Minimum Pipe Sizes (Nominal) (in.) - -
Number and Size of - -
Pump Relief Non Hose
Relief Meter Hose
Rating
(gpm
Suctiona,b,c Discharge
Valve
Valve
Discharge
Device Valves
threaded
connectiion
Header
supply
- -
1—
25 1 1 3∕4 1 11∕4
11∕2
1 — 21∕2 1 - -
1—
50 11∕2 11∕4 11∕4 11∕2 2
11∕2
1 — 21∕2 11∕2 - -
1—
100 2 2 11∕2 2 21∕2
21∕2
1 — 21∕2 21∕2 - -
1—
150 21∕2 21∕2 2 21∕2 3
21∕2
1 — 21∕2 21∕2 - -
1—
200 3 3 2 21∕2 3
21∕2
1 — 21∕2 21∕2 - -
1—
250 31∕2 3 2 21∕2 31∕2
21∕2
1 — 21∕2 3 - -
1—
300 4 4 21∕2 31∕2 31∕2
21∕2
1 — 21∕2 3 - -
2—
400 4 4 3 5 4
21∕2
1—5 4 - -
2—
450 5 5 3 5 4
21∕2
1—5 4 - -
2—
500 5 5 3 5 5
21∕2
1—5 4 - -
3—
750 6 6 4 6 5
21∕2
1—5 6 - -
4—
1000 8 6 4 8 6
21∕2
1—5 6 - -

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 19 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

6—
1250 8 8 6 8 6
21∕2
1—5 8 - -
6—
1500 8 8 6 8 8
21∕2
1—5 8 - -
6—
2000 10 10 6 10 8
21∕2
2 — 5d 8 - -
8—
2500 10 10 6 10 8
21∕2
2 — 5d 10 - -
12 —
3000 12 12 8 12 8
21∕2
2 — 5d 10 - -
12 —
3500 12 12 8 12 10
21∕2
3 — 5d 12 - -
16 —
4000 14 12 8 14 10
21∕2
3 — 5d 12 - -
16 —
4500 16 14 8 14 10
21∕2
3 — 5d 12 - -
20 —
5000 16 14 8 14 10
21∕2
3 — 5d 12 ---
4.30 Earthquake Protection. PASS
4.30.2 Seismic Loads. Flexible joints P
4.30.3 Components. Complied P
4.30.3.2 High Center of Gravity. Complied P
4.30.3.3 Pipe and Fittings Complied P
4.30.3.4 Appurtenances. Complied P
4.31 Packaged Fire Pump Assemblies. PASS
A packaged fire pump assembly, with or without an
4.31.1 Complied P
enclosure, shall meet all of the following requirements:
Pressure Actuated Controller Pressure Sensing
4.32 PASS
Lines.
4.32.4 Check Valves or Ground-Face Unions. Complied P
4.32.5 Shutoff Valve Complied P
4.32.6 Pressure Switch Actuation Complied P
4.33 Break Tanks PASS
Where a break tank is used to provide the pump suction
As instruction P
water supply, the installation shall comply with NFPA 22.
4.34 Field Acceptance Test of Pump Units PASS
Upon completion of the entire fire pump installation, an
acceptance test shall be conducted in accordance with the Complied P
provisions of this standard. (See Chapter 14.)
Automated Inspection, Testing, and Distance Monitoring of Devices,
4.35 PASS
Meters, and Equipment.
Devices, meters, and equipment utilized to perform
automated inspection and testing procedures that are
4.35.1 Complied P
subjected to system pressure, where provided, shall be
listed.
5 Fire Pumps for High-Rise Buildings PASS
5.1 General. Complied P
5.1.1 Application. Complied P
5.2 Equipment Access Complied P
5.3 Water Supply Tanks PASS
5.4 Fire Pump Test Arrangement Complied P
5.5 Power. Complied P

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 20 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

5.6 Very Tall Buildings. Not applicable NA

5.6.1 Water Supply Tanks for Very Tall Buildings Not applicable NA
5.6.2 Fire Pump Backup. NOT APPLICABLE NA
6 Centrifugal Pumps PASS
6.1 General. Complied P
6.1.1 Types Complied P
Centrifugal pumps shall be of the overhung impeller
6.1.1.1 Complied P
design and the impeller between bearings design.
6.1.2 Application Complied P
6.2 Factory and Field Performance PASS
Pumps shall furnish not less than 150 percent of rated Complied Complied
6.2.1 capacity at not less than 65 percent of total rated head.
(See Figure A.6.2.)
6.3 Fittings. PASS
Where necessary, the following fittings for the pump
6.3.1 shall be provided by the pump manufacturer or an Complied P
authorized representative:
6.3.3 Automatic Air Release Complied P
6.4 Foundation and Setting. PASS
Overhung impeller and impeller between bearings design
6.4.1 pumps and driver shall be mounted on a common grouted Complied P
base plate.
6.5 Connection to Driver and Alignment PASS
6.5.1 Coupling Type FLEXIBLE P
Complied
Separately coupled–type pumps with electric motor or
flexible connecting
6.5.1.1 diesel engine drivers shall be connected by a flexible P
shaft
coupling or flexible connecting shaft.
7 Vertical Shaft Turbine–Type Pumps PASS
7.1 General. Complied P
7.1.1 Application. Complied P
Where the water supply is located below the discharge
flange centerline and the water supply pressure is
Complied P
insufficient to deliver the water to the fire pump, a vertical
shaft turbine–type pump shall be used.
7.1.2 Factory and Field Performance Complied P
7.2 Water Supply. Complied P
7.2.1 Source Complied P
The water supply shall be adequate, dependable, and
7.2.1.1 Complied P
acceptable to the authority having jurisdiction.
7.2.2 Pump Submergence Complied P
7.2.2.1 Well Installations Complied P
7.2.2.2 Wet Pit Installations Complied P
7.2.3 Well Construction Not applicable NA
7.2.4 Unconsolidated Formations (Sands and Gravels) Not applicable NA
7.2.4.16 Tubular Wells Not applicable NA

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 21 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

7.2.6 Developing a Well Not applicable NA

7.2.7 Test and Inspection of Well Complied P
7.3 Pump PASS
7.3.1 Vertical Turbine Pump Head Component Complied P
The pump head shall be either the aboveground or
7.3.1.1 Above ground P
Below ground discharge type.
7.3.2 Column. Provided P
7.3.3 Bowl Assembly Complied P
7.3.4 Suction Strainer Complied P
7.3.5 Fittings Complied P
7.3.5.2 Automatic Air Release. Complied P
7.3.5.3 Water Level Detection Complied P
7.4 Installation PASS
7.4.1 Pump House. Complied P
The pump house shall be of such design as will offer the
7.4.1.1 least obstruction to the convenient handling and hoisting Complied P
of vertical pump parts.
7.4.2 Outdoor Setting Complied P
7.4.3 Foundation Complied P
7.4.3.7 Sump or Pit Complied P
7.5 Driver PASS
7.5.1 Method of Drive Complied P
7.5.1.6 Mass Elastic System Complied P
7.5.1.7 Gear Drives Complied P
7.5.1.8 Flexible Connecting Shafts Complied P
7.5.2 Controls Complied P
7.5.3 Variable Speed Vertical Turbine Pumps Complied P
7.6 Operation and Maintenance. PASS
7.6.1 Operation Complied P
7.6.2 Maintenance Complied P
8 Positive Displacement Pumps PASS
8.1 General. Complied P
8.1.1 Types Rotary vane P
8.1.2 Suitability. Complied P
8.1.3 Application PUMP P
8.1.4 Pump Seals Complied P
8.1.5 Pump Materials Complied P
8.1.6 Dump Valve Complied P
8.1.6.3 Dump Valve Control Complied P
8.1.6.3.2 Manual Operation Complied P
8.2 Foam Concentrate and Additive Pumps PASS
8.2.1 Additive Pumps Complied P
8.2.2 Net Positive Suction Head Complied P
8.2.3 Seal Materials Complied P
8.2.4 Dry Run Complied P
8.2.5 Minimum Flow Rates Complied P

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 22 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

8.2.6 Discharge Pressure Complied P

8.3 Water Mist System Pumps Complied P
Positive displacement pumps for water shall have
8.3.1 adequate capacities to meet the maximum system Complied P
demand for their intended service.
8.4 Water Mist Positive Displacement Pumping Units. PASS
Water mist positive displacement pumping units shall be
8.4.1 Complied P
dedicated to and listed as a unit for fire protection service.
8.5 Fittings PASS
8.5.1 Gauges Complied P
8.5.2 General Information for Relief Valves Complied P
8.5.3 Relief Valves for Foam Concentrate Pumps Complied P
8.5.4 Relief Valves for Water Mist Pumps Complied P
8.5.5 Suction Strainer Complied P
8.5.6 Water Supply Protection Complied P
8.5.7 Pressure Maintenance Complied P
8.6 Pump Drivers PASS
The driver shall be sized for and have enough power to
8.6.1 Complied P
operate the pump and drive train at all design points.
8.6.2 Reduction Gears Complied P
Electric motor +
8.6.3 Common Drivers P
diesel engine
8.7 Controllers Complied P
See Section 8.4 and Chapters 10 and 12 for requirements
Complied P
for controllers.
8.8 Foundation and Setting PASS
The pump and driver shall be mounted on a common
8.8.1 Complied P
grouted base plate
8.9 Driver Connection and Alignment Complied P
The pump and driver shall be connected by a listed,
8.9.1 closed coupled, flexible coupling or timing gear type of Complied P
belt drive coupling.
8.10 Flow Test Devices PASS
A positive displacement pump installation shall be
arranged to allow the test of the pump at its rated
8.10.1 Complied P
conditions as well as the suction supply at the maximum
flow available from the pump.
9 Electric Drive for Pumps PASS
9.1 General. Complied P
9.1.8 Interruption Complied P
9.2 Normal Power PASS
An electric motor–driven fire pump shall be provided
9.2.1 with a normal source of power as a continually available Complied P
source
The normal source of power required in 9.2.1 and its
9.2.2 routing shall be arranged in accordance with one of the Complied P
following
201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 23 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

(2) On-site power production facility connection dedicated

Complied P
to the fire pump installation
(3) Dedicated feeder connection derived directly from the
Complied P
dedicated service to the fire pump installation
(4) As a feeder connection where all of the following
Complied P
conditions Are met
(a) The protected facility is part of a multi building
Complied P
Campus-style arrangement.
(b) A backup source of power is provided from a source
Provided generator P
Independent of the normal source of power.
(c) It is impractical to supply the normal source of
power through the arrangement in 9.2.2(1), Complied P
9.2.2(2), or 9.2.2(3).
(d) The arrangement is acceptable to the authority
Complied P
Having jurisdiction.
(e) The overcurrent protection device(s) in each
disconnecting means is selectively coordinated with
P
any other supply side overcurrent protective Complied
Device.
(5) Dedicated transformer connection directly from the
service meeting the requirements of Article 695 of NFPA P
Complied
70
For fire pump installations using the arrangement in
9.2.2(1), 9.2.2(2), 9.2.2(3), or 9.2.2(5) for the normal
9.2.3 source of power, no more than one disconnecting means Complied P
and associated overcurrent protection device shall be
installed in the power Supply to the fire pump controller.
Where the disconnecting means permitted by 9.2.3 is
9.2.3.1 installed, the disconnecting means shall meet all of the Complied P
following requirements:
(1) It shall be identified as being suitable for use as
Complied P
service equipment
(2) It shall be lockable in both the closed position and the
Complied P
open position.
(3)* It shall be located remote from other building
Complied P
disconnecting means
(4)* It shall be located remote from other fire pump
Complied P
source disconnecting means.
(5) It shall be marked “Fire Pump Disconnecting Means
” in letters that are no less than 1 in. (25 mm) in height
Complied P
and That can be seen without having to open enclosure
doors or covers.
9.3 Alternate Power PASS
Unless there is an installed power arrangement as
9.3.1 described in 9.3.3, at least one alternative source of Provided generator P
power shall be provided for high-rise buildings.
9.3.6 Two or More Alternate Sources. Complied P
201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 24 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

9.4 Voltage Drop. PASS

Unless the requirements of 9.4.2 or 9.4.3 are met, the
voltage at the controller line terminals shall not drop more
9.4.1 220V/380V P
Than 15 percent below normal (controller-rated voltage)
under motor-starting conditions.
The requirements of 9.4.1 shall not apply to emergency
run Mechanical starting, provided a successful start can
9.4.2 Complied P
be demonstrated on the standby generator system. (See
10.5.3.2.)
The requirements of 9.4.1 shall not apply to the bypass
mode of a variable speed pressure limiting control (see
9.4.3 Complied P
10.10.3), provided a successful start can be demonstrated
on the standby gen-set
The voltage at the contactor(s) load terminals to which
the motor is connected shall not drop more than 5 percent
9.4.4 below the voltage rating of the motor when the motor is Complied P
operating at 115 percent of the full-load current rating of
the motor.
Wiring from the controller(s) to the pump motor shall be
in rigid metal conduit, intermediate metal conduit,
electrical metallic tubing, liquid tight flexible metal
9.4.4.1 Complied P
conduit, or liquid tight flexible non-metallic conduit Type
LFNC-B, listed Type MC cable with an impervious
covering, or Type MI cable.
Electrical connections at motor terminal boxes shall be
9.4.4.2 Complied P
made with a listed means of connection.
Twist-on, insulation-piercing type, and soldered wire
9.4.4.3 connectors shall not be permitted to be used for this Complied P
purpose.
9.5 Motors. PASS
9.5.1 General. Complied P
All motors shall comply with NEMA MG-1, Motors and
Generators, and shall be marked as complying with NEMA
Design B standards for three-phase motors or NEMA
9.5.1.1 Complied Complied
Design N or L standards for single-phase motors, and
shall be specifically listed for fire pump service. [See Table
9.5.1.1(a), Table 9.5.1.1(b), and Table 9.5.1.1(c).]
Table 9.5.1.1(a) Horsepower and Locked Rotor Current
Motor Designation for Three-Phase NEMA Design B - -
Motors
Rated Locked Rotor Current Motor Designation
Horsepower Three Phase 230 V at 60 (NFPA 70, Locked
Hertz (A) Rotor Indicating Code - -
Letter) “F to and
Including
1 30 N - -
11∕2 40 M - -
2 50 L - -
3 64 J - -
201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 25 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

5 92 H -
71∕2 127 G - -
10 162 G - -
15 232 G - -
20 290 G - -
25 365 G - -
30 435 G - -
40 580 G - -
50 725 G - -
60 870 G - -
75 1085 G - -
100 1450 G - -
125 1815 G - -
150 2170 G - -
200 2900 G - -
250 3650 G - -
300 4400 G - -
350 5100 G - -
400 5800 G - -
450 6500 G - -
500 7250 G - -
Single-phase motors shall be used only in across-the line
9.5.1.1.1 220V/380V P
starting applications
International Electrotechnical Commission (IEC) motors,
N 9.5.1.1.2 Complied P
where used, shall be listed for fire service.
The requirements of 9.5.1.1 shall not apply to direct
current, high-voltage (over 600 V), large-horsepower
9.5.1.2 [over 500 hp (373 kW)], single-phase, universal-type, or Complied P
wound-rotor motors, which shall be permitted to be used
where approved.
Part-winding motors shall have a 50-50 winding ratio in
9.5.1.3 order to have equal currents in both windings while No single phase P
running at nominal speed.
Table 9.5.1.1(b) Horsepower and Locked Rotor Current
Motor Designation for Single-Phase NEMA Design N and L - P
Motors
Locked Rotor Current Locked Rotor Current
Single-Phase 115 V at 60 Single-Phase 230 V at 60 - -
Hertz (A)* Hertz (A)*
Rated
Horsepower
Design N Design L Design N Design L - -
1∕6 20 - 12 - - -
1∕4 26 - 15 - - -
1∕3 31 - 18 - - -
1∕2 45 45 25 25 - -
3∕4 61 61 35 35 - -
1 80 80 45 45 - -
11∕2 - - - 50 - -
201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 26 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

2 - - - 65 - -
3 - - - 90 - -
5 - - - 135 - -
71∕2 - - - 200 - -
10 - - - 260 - -
Table 9.5.1.1(c) Horsepower and Locked Rotor Current Motor
Designation for Three-Phase, 380 V, 50 Hertz, NEMA Design B - -
Motors
Motor Designation
Locked Rotor Current (NFPA 70, Locked
Rated
Horsepower
Three-Phase 380 V at 50 Rotor Indicating Code - -
Hertz (A)* Letter)Fto and
Including
1 20 P - -
11∕2 27 N - -
2 43 M - -
3 43 L - -
5 61 K - -
71∕2 84 J - -
10 107 H - -
15 154 H - -
20 194 H - -
25 243 H - -
30 289 H - -
40 387 H - -
50 482 H - -
60 578 H - -
75 722 H - -
100 965 H - -
125 1207 H - -
150 1441 H - -
200 1927 H - -
250 2534 H - -
300 3026 H - -
350 3542 H - -
400 4046 H - -
450 4539 H - -
500 5069 H - -
9.5.1.4 Motors Used with Variable Speed Controllers. Complied P
9.5.1.9 Motors for Vertical Shaft Turbine–Type Pumps. Complied P
9.5.2 Current Limits. Complied P
The motor capacity in horsepower shall be such that the
maximum motor current in any phase under any condition
9.5.2.1 of pump load and voltage unbalance shall not exceed the Complied P
motor-rated full-load current multiplied by the service
factor.
9.5.2.2 The following shall apply to the service factor Complied P
(1) The maximum service factor at which a motor shall be
Complied P
used is 1.15.
201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 27 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

(2) Where the motor is used with a variable speed

pressure limiting controller, the service factor used shall 1.15x380V P
be as marked on the motor, but in no case exceed 1.15.
These service factors shall be in accordance with
9.5.2.3 Complied P
NEMA MG-1, Motors and Generators
General-purpose (open and dripproof) motors, totally
enclosed fan-cooled (TEFC) motors, and totally enclosed
9.5.2.4 Complied P
nonventilated (TENV) motors shall not have a service
factor larger than 1.15.
Motors used at altitudes above 3300 ft (1000 m) shall be
9.5.2.5 operated or derated according to NEMA MG-1, Motors and Complied P
Generators, Part 14.
9.5.3 Marking. Complied P
Marking of motor terminals shall be in accordance with
9.5.3.1 Complied P
NEMA MG-1, Motors and Generators, Part 2.
motor terminal connecting diagram for multiple lead
9.5.3.2 Complied P
motors shall be furnished by the motor manufacturer
9.6 On-Site Standby Generator Systems. Not applicable NA
9.6.1 Capacity. Not applicable NA
Where on-site generator systems are used to supply
power to fire pump motors to meet the requirements of
9.6.1.1 Not applicable NA
9.3.2, they shall be of sufficient capacity to allow normal
starting and
running of the motor(s) driving the fire pump(s) while
supplying all other simultaneously operated load(s) while Not applicable NA
meeting the requirements of Section 9.4.
9.6.2 Power Sources. Line power P
9.6.5 Protective Devices Breakers and fuses P
9.7 Junction Boxes Complied P
Where fire pump wiring to or from a fire
pump controller is routed through a junction box, the Complied P
following requirements shall be met:
(1) The junction box shall be securely mounted. Complied P
(2)* Mounting and installation of a junction box shall not
violate the enclosure type rating of the fire pump Complied P
controller( s)
(3)* Mounting and installation of a junction box shall not
violate the integrity of the fire pump controller(s) and
Complied P
shall not affect the short circuit rating of the controller(
s).
(4) As a minimum, a Type 2, drip proof enclosure
(junction box) shall be used. The enclosure shall be listed Complied P
to match the fire pump controller enclosure type rating.
(5) Terminals, junction blocks, and splices, where used,
Complied P
shall be listed.
(6) Neither a fire pump controller nor a fire pump power
Complied P
transfer switch, where provided, shall not be used as a

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 28 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

junction box to supply other equipment, including a

pressure maintenance (jockey) pump(s). (See 10.3.4.5.1
and 10.3.4.6.)
(7) Neither a fire pump controller nor a fire pump power
transfer switch shall be used as a junction box for wire Complied P
splices.
Listed Electrical Circuit Protective System to Controller
9.8 Complied P
Wiring.
Where single conductors (individual conductors) are
9.8.1 Complied P
used, they shall be terminated in a separate junction box
9.9 Raceway Terminations. Complied P
Listed conduit hubs shall be used to terminate raceway
9.9.1 Complied P
(conduit) to the fire pump controller
The type rating of the conduit hub(s) shall be at least
9.9.2 Complied P
equal to that of the fire pump controller
The installation instructions of the manufacturer of the
9.9.3 Complied P
fire pump controller shall be followed.
Alterations to the fire pump controller, other than conduit
9.9.4 entry as allowed by NFPA 70 shall be approved by the Complied P
authority having jurisdiction.
10 Electric-Drive Controllers and Accessories - PASS
10.1 General. Complied P
10.1.1 Application. Complied P
10.1.2 Performance and Testing. Complied P
10.1.2.1 Listing. Complied P
All controllers and transfer switches shall be specifically
Complied P
listed for electric motor–driven fire pump service.
10.1.2.2 Marking. Complied P
The controller and transfer switch shall be suitable for the
10.1.2.2.1 available short-circuit current at the line terminals of the Complied P
controller and transfer switch.
The controller and transfer switch shall be marked
“Suitable for use on a circuit capable of delivering not
more than ____ amperes RMS symmetrical at ____ volts
10.1.2.2.2 ac,” or “____ amperes RMS symmetrical at ___ volts For each device P
ac short-circuit current rating,” or equivalent, where the
blank spaces shown shall have appropriate values filled in
for each installation.
10.1.2.3 Preshipment - P
10.1.2.5 Additional Marking. Complied P
All controllers shall be marked “Electric Fire Pump
Controller ” and shall show plainly the name of the
Complied
10.1.2.5.1 manufacturer, identifying designation, maximum P
operating pressure, enclosure type designation, and
complete electrical rating.
Where multiple pumps serve different areas or portions of
10.1.2.5.2 Complied P
the facility, an appropriate sign shall be conspicuously
201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 29 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

attached to each controller indicating the area, zone, or

portion of the system served by that pump or pump
controller.
10.1.2.6 Service Arrangements. Complied P
10.1.2.7 State of Readiness Complied P
10.1.3 Design - P
10.2 Location. - P
Controllers shall be located as close as is practical to the
motors they control and shall be within sight of the
10.2.1 motors. 10.2.2 Controllers shall be located or protected Complied P
so that they will not be damaged by water escaping from
pumps or pump connections.
10.3 Construction. Complied P
10.3.1 Equipment. Complied P
All equipment shall be suitable for use in locations subject
to a moderate degree of moisture, such as a damp Complied P
basement.
Complied
10.3.2 Mounting. P
All equipment shall be mounted in a substantial manner
on a single non-combustible supporting Complied P
structure
10.3.3 Enclosures. Complied P
The structure or panel shall be securely mounted in, as a
minimum, a National Electrical Manufacturers Association
10.3.3.1 Complied P
NEMA) Type 2, dripproof enclosure(s) or an enclosure(s)
with an ingress protection (IP) rating of IP31.
Where the equipment is located outside, or where special
10.3.3.2 environments exist, suitably rated enclosures shall be Complied P
used.
The enclosure(s) shall be grounded in accordance with
10.3.3.3 Complied P
NFPA 70, Article 250.
10.3.4 Connections and Wiring. Complied P
Complied IE3
10.3.4.4 Continuous-Duty Basis. P
heavy duty
10.3.4.5 Field Connections Complied P
A fire pump controller shall not be used as a junction
10.3.4.5.1 box for any purpose (see Section 9.7), including the Complied P
following
(1) To supply other equipment Complied P
(2) To splice incoming or outgoing wires Complied P
(3) To connect external surge suppression Complied P
10.3.5 Protection of Control Circuits Complied P
10.3.6 External Operation Complied P
10.3.7 Electrical Diagrams and Instructions Complied P
10.3.8 Marking Complied P

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 30 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

Each motor control device and each switch and circuit

CONTRACTORS/
breaker shall be marked to plainly indicate the name of PURCHASER SCOPE
10.3.8.1 the manufacturer, the designated identifying number, and RELATED TO P
the electrical rating in volts, horsepower, amperes,
CONTROLLERS
frequency, phases, and so forth, as appropriate.
The markings shall be so located as to be visible after
10.3.8.2 Complied P
installation.
10.4 Components. Complied P
10.4.1 Voltage Surge Arrester Complied P
10.4.2 Isolating Switch. Complied P
10.4.2.1 General. Complied P
The isolating switch shall be a manually operable motor
circuit switch or a molded case switch having a
10.4.2.1.1 Complied P
horsepower rating equal to or greater than the motor
horsepower.
A molded case switch having an ampere rating not less Contractors/
than 115 percent of the motor rated full-load current and purchaser scope
10.4.2.1.2 P
also suitable for interrupting the motor locked rotor Related to
current shall be permitted. controllers
A molded case isolating switch shall be permitted to have
self-protecting instantaneous short-circuit overcurrent
10.4.2.1.3 P
protection, provided that this switch does not trip unless
the circuit breaker in the same controller trips.
10.4.2.2 Externally Operable Complied P
The isolating switch shall be externally operable. Complied P
Contractors/
purchaser scope
10.4.2.3 Ampere Rating P
Related to
controllers
The ampere rating of the isolating switch shall be at least
Complied P
115 percent of the full-load current rating of the motor.
10.4.2.4 Warning Complied P
Unless the requirements of 10.4.2.4.2 are met, the
10.4.2.4.1 following warning shall appear on or immediately Complied P
adjacent to the isolating switch:
WARNING: DO NOT OPEN OR CLOSE THIS SWITCH
WHILE THE CIRCUIT BREAKER (DISCONNECTING Complied P
MEANS) IS IN CLOSED POSITION.
10.4.2.4.2 Instruction Label Complied P
The requirements of 10.4.2.4.1 shall not apply where the
Complied P
requirements of 10.4.2.4.2.1 and 10.4.2.4.2.2 are met.
Where the isolating switch and the circuit breaker are so
interlocked that the isolating switch can be neither
10.4.2.4.2.1 opened nor closed while the circuit breaker is closed, the Complied P
warning label shall be permitted to be replaced with an
instruction label that directs the order of operation.
10.4.2.4.2.2 This label shall be permitted to be part of the Complied P

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 31 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

label required by 10.3.7.3

10.4.2.5 Operating Handle Complied P
Unless the requirements of 10.4.2.5.2 are met, the
isolating switch operating handle shall be provided with a
10.4.2.5.1 spring latch that shall be so arranged that it requires the Complied P
use of the other hand to hold the latch released in order
to permit opening or closing of the switch.
The requirements of 10.4.2.5.1 shall not apply where the
isolating switch and the circuit breaker are so interlocked
10.4.2.5.2 Complied P
that the isolating switch can be neither opened nor closed
while the circuit breaker is closed.
10.4.3 Circuit Breaker (Disconnecting Means). Complied P
10.4.3.1 General. Complied P
The motor branch circuit shall be protected by a circuit
breaker that shall be connected directly to the load side
One pole P
of the isolating switch and shall have one pole for each
ungrounded circuit conductor.
10.4.3.2 Mechanical Characteristics Complied P
The circuit breaker shall
Breaker 100A P
have the following mechanical characteristics:
(1) It shall be externally operable. (See 10.3.6.) Operable P
(2) It shall trip free of the handle Trip P
(3) A nameplate with the legend “ Circuit breaker —
Contractors/
disconnecting means” in letters not less than 3∕8 in. (10 purchaser scope
mm) high shall be located on the outside of the controller Related to P
enclosure adjacent to the means for operating the circuit controllers
breaker.
10.4.3.3 Electrical Characteristics. Complied P
The circuit breaker shall have the following electrical
10.4.3.3.1 Complied P
characteristics:
Contractors/
(1) A continuous current rating not less than 115 percent purchaser scope
Related to P
of the rated full-load current of the motor
controllers
(2) Overcurrent-sensing elements of the non-thermal
Non thermal P
type
(3)Instantaneous short-circuit overcurrent protection Protected P
(4)* An adequate interrupting rating to provide the
Complied P
suitability rating of the controller discussed in 10.1.2.2
(5) Capability of allowing normal and emergency starting
No trip P
and running of the motor without tripping (see 10.5.3.2)
(6) An instantaneous trip setting of not more than 20
Complied P
times the full-load current
10.4.4 Locked Rotor Overcurrent Protection. Protected P
The only other overcurrent protective device that shall be Located within the
P
required and permitted between the isolating switch and fire pump

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 32 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

the fire pump motor shall be located within the fire pump
controller and shall possess the following characteristics:
(1) For a squirrel-cage or wound-rotor induction motor,
the device shall be of the time-delay type having tripping Complied P
times as follows:
(a) Between 8 seconds and 20 seconds at locked rotor
Complied P
current
(b) Three minutes at a minimum of 300 percent of
Complied P
motor full-load current
(2) For a direct-current motor, the device shall be as
Complied P
follows:
Instantaneous
(a) Of the instantaneous type P
type
(b) Calibrated and set at a minimum of 400 percent of
Complied P
motor full-load current
(3) There shall be visual means or markings clearly
indicated on the device that proper settings have been Complied P
made.
(4)* It shall be possible to reset the device for operation
Complied
immediately after tripping, with the tripping P
characteristics thereafter remaining unchanged.
(5) Tripping shall be accomplished by opening the circuit
Complied P
breaker, which shall be of the external manual reset type.
10.4.5 Motor Starting Circuitry Complied P
10.4.5.1 Motor Contactor Complied P
The motor contactor shall be horsepower rated and shall
be of the magnetic type with a contact in each Complied P
ungrounded conductor.
Running contactors shall be sized for both the locked rotor
10.4.5.1.1 currents and the continuous running currents Complied P
encountered.
Starting contactors shall be sized for both the locked rotor
10.4.5.1.2 Complied P
current and the acceleration (starting) encountered.
10.4.5.2 Timed Acceleration Not Applicable NA
10.4.5.3 Starting Resistors Not Applicable NA
10.4.5.4 Starting Reactors and Autotransformers. Not Applicable NA
10.4.5.5 Soft Start Units Not Applicable NA
10.4.5.6 Operating Coils Not Applicable NA
10.4.5.7 Single-Phase Sensors in Controller Not Applicable NA
10.4.6 Signal Devices on Controller Complied P
10.4.6.1 Power Available Visible Indicator Complied P
10.4.6.2 Phase Reversal Complied P
Fire Pump Alarm and Signal Devices Remote from
10.4.7 Not Applicable NA
Controller.
10.4.7.2.1 Pump or Motor Running Complied P
10.4.7.2.2 Loss of Phase. Complied P

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 33 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

The fire pump alarm shall actuate whenever any phase at

10.4.7.2.2.1 Complied P
the line terminals of the motor contactor is lost.
All phases shall be monitored, which detects loss of phase
10.4.7.2.2.2 Complied P
whether the motor is running or at rest
10.4.7.2.3 Phase Reversal Complied P
The fire pump alarm shall actuate whenever the three-
phase power at the line terminals of the motor contactor Complied P
is reversed.
10.4.7.2.4 Controller Connected to Alternate Source Complied P
Where two sources of power are supplied to meet the
requirements of 9.3.2, this signal shall indicate whenever
Indicated P
the alternate source is the source supplying power to the
controller
10.4.7.2.5 Alternate Source Isolating Switch or Circuit Breaker Open. Complied P
Where two sources of power are supplied to meet the
requirements of 9.3.2, this signal shall indicate whenever
Indicated P
the alternate source is the source supplying power to the
controller.
Complied
10.4.7.2.6 Controller or System Trouble P
A controller or system trouble alarm shall actuate
whenever a ground-fault signal, when provided (see
10.4.5.9), a pressure-sensing device signal (see Complied P
10.5.2.1.3.1 and 10.5.2.1.3.2), a variable speed trouble
signal, or a fail-to-start signal (see 10.5.2.7.5) occurs
10.4.8 Controller Contacts for Remote Indication Not Applicable NA
Controllers shall be equipped with contacts (open or
closed) to operate circuits for the conditions in 10.4.7.2.1
through 10.4.7.2.3 and 10.4.7.2.6 and when a controller Not Applicable NA
is equipped with a transfer switch in accordance with
10.4.7.2.4 and 10.4.7.2.5.
10.5 Starting and Control. Complied P
10.5.1* Automatic and Non automatic Automatic P
An automatic controller shall be self-acting to start,
10.5.1.1 Complied P
run, and protect a motor
10.5.2 Automatic Controller Complied P
10.5.2.1 Water Pressure Control. Complied P
10.5.2.1.1 Pressure-Sensing Device. Complied P
A pressure-sensing device, either a pressure actuated
. switch or electronic pressure sensor, having adjustable
Provided P
10.5.2.1.1.1 high- and low-calibrated set points shall be provided as
part of the controller
10.5.2.2 Non pressure Switch–Actuated Automatic Controller Complied P
10.5.2.3 Fire Protection Equipment Control. Complied P
10.5.2.4 Manual Electric Control at Remote Station Not Applicable NA
10.5.2.5 Sequence Starting of Pumps Complied P
10.5.2.6 External Circuits Connected to Controllers Complied P
201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 34 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

10.5.2.7 Automatic Testing Complied P

10.5.3 Non automatic Controller Complied P
10.5.3.1 Manual Electric Control at Controller Complied P
10.5.3.2 Emergency-Run Mechanical Control at Controller Complied P
10.5.3.3 Manual Testing of Automatic Operation. Complied P
10.5.4 Methods of Stopping Complied P
10.5.4.1 Manual. Complied P
10.5.4.2 Automatic Shutdown After Automatic Start Automatic P
10.6 Controllers Rated in Excess of 600 V. Not applicable NA
10.6.1 Control Equipment. Complied P
10.6.2 Provisions for Testing Complied P
10.6.3 Disconnecting Under Load Complied P
10.6.4 Pressure-Actuated Switch Location Complied P
10.6.5 Low-Voltage Control Circuit Complied P
10.6.5.5 Current Transformers Complied P
10.6.6 Indicators on Controller Complied P
10.6.7 Protection of Personnel from High Voltage Complied P
10.6.8 Disconnecting Means Complied P
10.6.9 Locked Rotor Overcurrent Protection Complied P
10.6.10 Emergency-Run Mechanical Control at Controller Complied P
10.7 Limited Service Controllers Complied P
10.7.1 Limitations. Complied P
10.7.2 Requirements Complied P
10.8 Power Transfer for Alternate Power Supply Complied P
10.8.1 General. Complied P
Where required by the authority having jurisdiction
or to meet the requirements of 9.3.2 where an on-site
electrical power transfer device is used for power source
10.8.1.1 Complied P
selection, such switch shall comply with the provisions of
Section 10.8 as well as Sections 10.1, 10.2, and 10.3 and
10.4.1.
Arrangement I (Listed Combination Fire Pump
10.8.2.1 Arrangement I P
Controller and Power Transfer Switch).
10.8.2.1.1 Self-Contained Power Switching Assembly Self-Contained P
Where the power transfer switch consists of a self-
contained power switching assembly, such assembly shall
be housed in a barriered compartment of the fire pump housed in a
P
controller or in a separate enclosure attached to the barriered
controller and marked “ Fire Pump Power Transfer
Switch.”
10.8.2.1.2 Isolating Switch. ISOLATING P
10.8.2.1.3 Circuit Breaker Complied P
The transfer switch emergency side shall be provided with
Provided P
a circuit breaker complying with 10.4.3 and 10.4.4.
10.8.2.1.4 Cautionary Marking Complied P

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 35 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

Arrangement II (Individually Listed Fire Pump Controller

10.8.2.2 Arrangement II P
and Power Transfer Switch).
The following shall be provided: Provided P
1) A fire pump controller power transfer switch complying
with Sections 9.6 and 10.8 and a fire pump controller shall
Separate
be provided. The overcurrent protection required by
enclosure P
10.8.2.2(2) and the isolating switch required by
upstream
10.8.2.2(3) shall be permitted to be provided in a
separate enclosure upstream of the transfer switch.
(2) The transfer switch overcurrent protection for both
the normal and alternate sources shall comply with Complied P
9.2.3.4 or 9.2.3.4.1.
(3) An instantaneous trip circuit breaker shall be
permitted in lieu of the overcurrent devices specified in
Permitted in lieu of
10.8.2.2(2) provided it is part of a transfer switch P
the overcurrent
assembly listed for
fire pump service and complies with 9.2.3.4.1
(4) An isolating switch ahead of the alternate source input
terminals of the transfer switch shall meet the following Complied P
requirements:
(a) The isolating switch shall be externally operable and
Complied P
lockable in both the closed and the open position.
(b) A placard shall be externally installed on the isolating
switch stating “Fire Pump Isolating Switch,” with letters Complied P
at least 1 in. (25 mm) in height.
(c) A placard shall be placed adjacent to the fire pump
controller stating the location of the isolating switch and Complied P
the location of the key (if the isolating switch is locked).
(d) The isolating switch shall be supervised by one of the
Complied P
following methods to indicate when it is not closed:
i. Central station, proprietary, or remote station signal
Not applicable NA
service
ii. Local signaling service that will cause the sounding of
Complied P
an audible signal at a constantly attended poin
iii. Locking the isolating switch closed Complied P
iv. Sealing of isolating switches and approved weekly
recorded inspections where isolating switches are located
Complied P
within fenced enclosures or in buildings under the control
of the owner
(e) This supervision shall operate an audible and visible
signal on the transfer switch and permit monitoring at a Not applicable NA
remote point, where required
(5) The isolation switch shall not have short-circuit or
overcurrent protection as part of the switching Complied P
mechanism of the isolating switch.
(6) The transfer switch shall be the delayed transition
Complied P
type with a maximum delay time of 3 seconds.

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 36 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

10.8.3 Power Transfer Switch Requirements. Complied P

10.8.3.1 Listing. Complied P
The power transfer switch shall be specifically
Complied P
listed for fire pump service
10.8.3.2 Suitability Complied P
The power transfer switch shall be suitable
for the available short-circuit currents at the transfer Complied P
switch normal and alternate input terminals
10.8.3.3 Electrically Operated and Mechanically Held Complied P
10.8.3.4 Ampere Rating Complied P
The power transfer switch shall have an ampere rating
not less than 115 percent of the motor full load current
Complied P
and shall also be suitable for switching the motor locked
rotor current.
10.8.3.5 Manual Means of Operation Complied P
10.8.3.6 Under voltage- and Phase-Sensing Devices Complied P
10.8.3.7 Voltage- and Frequency-Sensing Devices. Complied P
Unless the requirements of 10.8.3.7.3 are met, the
Complied P
requirements of 10.8.3.7.1 and 10.8.3.7.2 shall apply.
10.8.3.8 Visible Indicators Complied P
Two visible indicators shall be provided to externally
indicate the power source to which the fire pump Complied P
controller is connected.
10.8.3.9 Retransfer. Complied P
10.8.3.10 In-Rush Currents. Complied P
Means shall be provided to prevent higher than normal in-
rush currents when transferring the fire pump motor from Complied P
one source to the other.
10.8.3.11 Overcurrent Protection Complied P
10.8.3.12 Additional Requirements Not applicable NA
The following shall be provided: Not applicable NA
(1) A device to delay starting of the alternate source
generator to prevent nuisance starting in the event of Not applicable NA
momentary dips and interruptions of the normal source
(2) A circuit loop to the alternate source generator
whereby either the opening or closing of the circuit will
Not applicable NA
start the alternate source generator (when commanded
by the power transfer switch) (see 10.8.3.6)
(3) A means to prevent sending of the signal for starting
of the alternate source generator when commanded by
the power transfer switch, if the alternate isolating switch Not applicable NA
or the alternate circuit breaker is in the open or tripped
position
10.8.3.13 Momentary Test Switch Complied P
10.8.3.14 Remote Indication NA
10.9 Automatic Starting. Complied P

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 37 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

In lieu of the pressure-actuated switch described in

10.5.2.1, automatic starting shall be capable of being
Complied P
accomplished by the automatic opening of a closed circuit
loop containing this fire protection equipment
10.9.3 Methods of Stopping. Auto & manual P
10.9.4 Lockout. Complied P
10.9.5 Marking Complied P
The controller shall be marked “ Additive Pump
Complied P
Controller.”
Controllers with Variable Speed Pressure Limiting Control
10.10 Complied P
or Variable Speed Suction Limiting Control.
10.10.1 Control Equipment Complied P
10.10.2 Additional Marking. Complied P
In addition to the markings required in 10.1.2.5.1, the
controller shall be marked with the maximum ambient Complied P
temperature rating.
10.10.3 Bypass Operation Complied P
10.10.3.1.1 Low Pressure Complied P
If the system pressure remains below the set pressure for
Complied P
more than 15 seconds, the bypass operation shall occur.
10.10.3.1.2 Drive Not Operational Complied P
If the variable speed drive indicates that it is not
operational within 5 seconds, the bypass operation shall Complied P
occur
10.10.3.4 Automatic Shutdown Complied P
When the variable speed pressure limiting control is
bypassed, automatic shutdown of the controller shall be Complied P
as permitted by 10.5.4.2.
10.10.4 Isolation. Complied P
The variable speed drive shall be line and load isolated
10.10.4.1 Complied P
when not in operation
Complied
10.10.5 Circuit Protection P
Separate variable speed drive circuit protection shall
be provided between the line side of the variable speed
10.10.5.1 Complied P
drive and the load side of the circuit breaker required in
10.4.3
10.10.6 Power Quality High P
Power quality correction equipment shall be located in the
10.10.6.1 Complied P
variable speed circuit.
10.10.6.1.1 As a minimum, 5 percent line reactance shall be provided. Complied P
10.10.7 Local Control Complied P
All control devices required to keep the controller
10.10.7.1 Complied P
in automatic operation shall be within lockable enclosures
10.10.8 Indicating Devices on Controller Complied P
10.10.8.1 Drive Failure Complied P

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 38 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

A visible indicator shall be provided to indicate when the

Complied P
variable speed drive has failed
10.10.8.2 Bypass Mode Complied P
A visible indicator shall be provided to indicate when the
Complied P
controller is in bypass mode
10.10.8.3 Variable Speed Pressure Limiting Control Overpressure. Complied P
Visible indication shall be provided on all controllers
equipped with variable speed pressure limiting control to Complied P
actuate at 115 percent of set pressure.
10.10.9 Controller Contacts for Remote Indication Not applicable NA
Controllers shall be equipped with contacts (open or
Complied P
closed) to operate circuits for the conditions in 10.10.8.
10.10.10 System Performance High P
10.10.11 Critical Settings Complied P
Means shall be provided and permanently attached to the
inside of the controller enclosure to record the following Complied P
settings
(1) Variable speed pressure limiting set point setting Complied P
(2) Pump start pressure Complied P
(3) Pump stop pressure Complied P
10.10.12 Variable Speed Drives for Vertical Pumps Complied P
The pump supplier shall inform the controller
manufacturer of any and all critical resonant speeds
10.10.12.1 Complied P
within the operating speed range of the pump, which is
from zero speed up to full speed.
11 Engine Drive - PASS
11.1 General. Complied P
This chapter provides requirements for minimum
11.1.1 Complied P
performance of diesel engine drivers
11.1.3 Engine Type Diesel engine P
Diesel engines for fire pump drive shall be of the
11.1.3.1 Ignition type P
compression ignition type.
11.2 Engines. Complied P
11.2.1 Listing Complied P
Engines shall be listed for fire pump service. Complied P
11.2.2 Engine Ratings Complied P
Engines shall have a nameplate indicating the listed
11.2.2.1 Complied P
horsepower rating available to drive the pump
The horsepower capability of the engine, when equipped
for fire pump service, shall have a 4-hour minimum
11.2.2.2 S- hours P
horsepower rating not less than 10 percent greater than
the listed horsepower on the engine nameplate.
11.2.3 Engine Power Connection to Pump Complied P
Horizontal shaft engines shall be provided with a means
Attached of a
11.2.3.1 for direct attachment of a flexible coupling adaptor, a P
flexible coupling
flexible connecting shaft adaptor, a stub shaft, or a

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 39 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

torsional coupling to the engine flywheel. (See Section 6.5

and 7.5.1.4.)
11.2.4 Engine Speed Controls Complied P
11.2.4.1 Speed Control Governor Complied P
Engines shall be provided with a governor capable of
regulating engine speed within a range of 10 percent
11.2.4.1.1 Complied P
between shutoff and maximum load condition of the
pump
11.2.4.2 Electronic Fuel Management Control Complied P
11.2.4.2.1 Alternate Electronic Control Module Complied P
Engines that incorporate an electronic control module
(ECM) to accomplish and control the fuel injection process
shall have an alternate ECM permanently mounted and ECM P
wired so the engine can produce its full rated power
output in the event of a failure of the primary ECM.
11.2.4.2.2 ECM Voltage Protection Complied P
ECMs shall be protected from transient voltage spikes and
Complied P
reverse dc current.
11.2.4.2.3 ECM Selector Switch. Complied P
11.2.4.2.3.1 Operation Complied P
(A) The transition from the primary ECM to the alternate,
or alternate to primary shall be controlled by a Complied P
hand/automatic switch without an off position.
(B) When the switch required in 11.2.4.2.3.1(A) is in the
automatic position, the transition from the primary ECM
Complied P
to the alternate, or alternate to primary shall be
accomplished automatically upon failure of either ECM.
(C) When the switch required in 11.2.4.2.3.1(A) is in the
hand position, the transition from the primary ECM to the
Complied P
alternate, or from alternate to primary shall be
accomplished manually
11.2.4.2.3.2 Supervision Complied P
A visual indicator shall be provided on the engine
instrument panel, and a supervisory signal shall be
Complied P
provided to the controller when the ECM selector switch
is positioned to the alternate ECM.
11.2.4.2.3.3 Contacts. Complied P
(A) The contacts for each circuit shall be rated for both
Complied p
the minimum and maximum current and voltage.
(B) The total resistance of each ECM circuit through the
selector switch shall be approved by the engine Complied P
manufacturer
11.2.4.2.3.4 Enclosure. Complied P
(A) The selector switch shall be enclosed in a NEMA Type
Complied P
2 drip proof enclosure.
(B) Where special environments exist, suitably rated
Complied P
enclosures shall be used.
201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 40 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

11.2.4.2.3.5 Mounting. Complied P

(A) The selector switch and enclosure shall be engine
Complied P
mounted.
B) The selector switch enclosure and/or the selector
switch inside shall be isolated from engine vibration to Complied P
prevent any deterioration of contact operation
11.2.4.2.4 Engine Power Output Complied P
The ECM (or its connected sensors) shall not, for any
reason, intentionally cause a reduction in the engine's Complied P
ability to produce rated power output.
11.2.4.2.5 ECM Sensors Complied P
Any sensor necessary for the function of the ECM that
affects the engine's ability to produce its rated power
Operated
output shall have a redundant sensor that shall operate P
automatically
automatically in the event of a failure of the primary
sensor.
11.2.4.2.6 ECM Engine Supervision Complied P
A common supervisory signal shall be provided to the
Complied P
controller as a minimum for the following events:
1) Fuel injection trouble Complied P
(2) Low fuel pressure Complied P
(3) Any primary sensor failure Complied P
11.2.4.2.7 ECM and Engine Power Supply Complied P
In the standby mode, the engine batteries or
1.2.4.2.7.1 Complied P
battery chargers shall be used to power the ECM
Variable Speed Pressure Limiting Control or Variable
11.2.4.3 Complied P
Speed Suction Limiting Control (Optional
Variable speed pressure limiting control or variable speed
suction limiting control systems used on diesel engines for
11.2.4.3.1 fire pump drive shall be listed for fire pump service and Complied P
be capable of limiting the pump output total rated head
(pressure) or suction pressure by reducing pump speed.
11.2.4.3.4 Pressure-Sensing Line Complied P
A pressure-sensing line shall be provided to the engine
11.2.4.3.4.1 with a 1∕2 in. (12.7 mm) nominal size inside diameter Complied P
line.
Engine Over speed Shutdown Control, Low Oil Pressure
11.2.4.4 Complied P
Signal, and High and Low Coolant Temperature Signals
Engines shall be provided with an over speed shutdown
11.2.4.4.1 Complied P
device.
11.2.4.5 Engine Running and Crank Termination Control Complied P
Engines shall be provided with a speed-sensitive
11.2.4.5.1 Complied P
switch to signal engine running and crank termination
11.2.5 Instrumentation Complied P
11.2.5.1 Instrument Panel. Complied P
Result details:

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 41 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

All engine instruments shall be placed on a panel secured

Placed on a panel
1.2.5.1.1 to the engine or inside an engine base plate–mounted P
secured
controller.
11.2.5.2 Engine Speed Complied P
A tachometer or other means shall be provided to indicate
11.2.5.2.1 revolutions per minute of the engine, including zero, at all Complied P
times.
11.2.5.3 Oil Pressure. Complied P
Engines shall be provided with an oil pressure gauge or
Oil pressure gauge P
other means to indicate lubricating oil pressure.
11.2.5.4 Temperature. Complied P
Engines shall be provided with a temperature gauge or
other means to indicate engine coolant temperature at all Labelled P
times.
11.2.6 Wiring Elements. Complied P
1.2.6.1 Automatic Controller Wiring in Factory. Complied P
All connecting wires for automatic controllers shall be
harnessed or flexibly enclosed, mounted on the engine,
1.2.6.1.1 and connected in an engine junction box to terminals Complied P
numbered to correspond with numbered terminals in the
controller.
11.2.6.2 Automatic Control Wiring in the Field. Complied P
Interconnections between the automatic controller and
11.2.6.2.1 the engine junction box shall be made using stranded wire Complied P
sized on a continuous-duty basis.
Interconnection wire size shall be based on length as
11.2.6.2.1.1 recommended for each terminal by the controller Complied P
manufacturer.
The dc interconnections between the automatic controller
11.2.6.2.2 and engine junction box and any ac power supply to the Complied P
engine shall be routed in separate conduits
11.2.6.3 Battery Cables. Complied P
Battery cables shall be sized in accordance with the
Battery cables
11.2.6.3.1 Engine manufacturer's recommendations considering the P
6mm
cable length required for the specific battery location
11.2.7 Starting Methods Complied P
11.2.7.1 Starting Devices Complied P
Engines shall be equipped with a reliable starting device. Complied P
11.2.7.2 Electric Starting Complied P
Where electric starting is used, the electric starting device
Complied P
shall take current from a storage battery (ies).
11.2.7.2.1 Engine Batteries Complied P
Each engine shall be provided with two storage battery
11.2.7.2.1.1 Complied P
units: battery unit A and battery unit B.
Flooded lead-acid batteries shall be furnished in a moist
11.2.7.2.1.2 or dry charge condition with electrolyte liquid in a Complied P
separate container. Valve-regulated lead-acid (VRLA)
201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 42 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

batteries shall be furnished in a completed, charged

condition
11.2.7.2.2 Battery Isolation. Complied P
Engines with only one cranking motor shall include a main
11.2.7.2.2.1 battery contactor installed between each battery and the Complied P
cranking motor for battery isolation.
(A) Main battery contactors shall be listed for fire pump
Complied P
driver service.
(B) Main battery contactors shall be rated for the cranking
Complied P
motor current
(C) Main battery contactors shall be capable of manual
mechanical operation, including positive methods such as
spring-loaded, over-center operator to energize the Complied P
starting
motor in the event of controller circuit failure
11.2.7.2.3 Battery Loads Complied P
11.2.7.2.4 Battery Location Complied P
11.2.7.2.5 Battery Recharging. Complied P
Two means for recharging storage batteries shall be
11.2.7.2.5.1 Complied P
provided.
11.2.7.3 Hydraulic Starting. Complied P
Where hydraulic starting is used, the accumulators and
11.2.7.3.1 other accessories shall be enclosed or so protected that Complied P
they are not subject to mechanical injury.
The piping between the engine and the hydraulic
accumulator system shall be installed in accordance with
11.2.7.3.2 Complied P
the manufacturer ’s maximum allowed pressure drop
recommendations
11.2.7.4 Air Starting. Not applicable NA
In addition to the requirements of Section 11.1 through
11.2.7.4.1 11.2.7, 11.2.8.1, 11.2.8 through 11.6.2, 11.6.4, and Not applicable NA
11.6.6, the requirements of 11.2.7.4 shall apply
11.2.7.4.2 Automatic Controller Connections in Factory Complied P
All conductors for automatic controllers shall be
harnessed or flexibly enclosed, mounted on the engine,
11.2.7.4.2.1 and connected in an engine junction box to terminals Complied P
numbered to correspond with numbered terminals in the
controller
11.2.7.4.3 Signal for Engine Running and Crank Termination Complied P
Engines shall be provided with a speed-sensitive switch to
11.2.7.4.3.1 Complied P
signal running and crank termination.
Power for this signal shall be taken from a source other
11.2.7.4.3.2 Complied P
than the engine compressor
11.2.7.4.4 Air Starting Supply Complied P
Where the engine is equipped with multiple cranking
11.2.7.4.4.1 Complied P
systems of different types, one system shall be defined as

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 43 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

a primary cranking system and the other as a secondary

cranking system.
11.2.8 Engine Cooling System. Complied P
The engine cooling system shall be included as part of the
11.2.8.1 engine assembly and shall be one of the following closed- Complied P
circuit types
(1) A heat exchanger type that includes a circulating
pump driven by the engine, a heat exchanger, and an Complied P
engine jacket temperature regulating device
(2) A radiator type that includes a circulating pump driven
by the engine, a radiator, an engine jacket temperature
Complied P
regulating regulating device, and an engine-driven fan for
providing positive movement of air through the radiator
11.2.8.5 Heat Exchanger Water Supply Not applicable NA
The cooling water supply for a heat exchanger–type
11.2.8.5.1 system shall be from the discharge of the pump taken off Not applicable NA
prior to the pump discharge check valve
11.2.8.5.3 Heat Exchanger Water Supply Components Not applicable NA
11.2.8.5.3.1 Threaded rigid piping shall be used for this connection Not applicable NA
11.2.8.5.3.6 Automatic Valve. Complied P
(A) An automatic valve listed for fire protection service
Automatic valve
shall permit flow of cooling water to the engine when it is P
listed
running.
(B) Energy to operate the automatic valve shall come
from the diesel driver or its batteries and shall not come Battery energy P
from the building.
(C) The automatic valve shall be normally closed Normally closed P
(D) The automatic valve shall not be required on a vertical
shaft turbine–type pump or any other pump when there Complied P
is no pressure in the discharge when the pump is idle
11.2.8.6 Heat Exchanger Water Supply Bypass Complied P
11.2.8.7 Heat Exchanger Waste Outlet Complied P
11.2.8.8 Radiators. Complied P
11.2.8.8.4 Fan Complied P
11.2.9 Engine Lubrication Complied P
11.3 Pump Room Complied P
11.3.2.3 Air Supply Ventilator. Complied P
11.3.2.4 Air Discharge Ventilator. Complied P
11.3.2.4.3 Radiator-Cooled Engines. Complied P
11.4 Fuel Supply and Arrangement. Complied P
11.4.1 General. Complied P
11.4.1.2 Fuel Supply Tank Complied P
11.4.1.3 Fuel Supply Tank Capacity Complied P
11.4.1.4 Tank Construction. Complied P
11.4.1.5 Tank Connections. Complied P
11.4.1.6 Vent Piping. Complied P
Hydrostatic Tests Curve:
201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 44 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

11.4.2 Tank Level Indication. Complied P

Means other than sight tubes for continuous indicating of
11.4.2.1 Complied P
the amount of fuel in each storage tank shall be provided.
A fuel level indicator shall be provided to activate at
11.4.2.2 Complied P
the two-thirds tank level
11.4.3 Fuel Supply Tank Location. Complied P
11.4.4 Fuel Piping. Complied P
11.4.4.6 Fuel Line Protection. Complied P
A guard, pipe protection, or approved double-walled pipe
shall be provided for all fuel lines exposed to traffic or Complied P
possible damage.
11.4.4.7 Fuel Solenoid Valve Complied P
. Where an electric solenoid valve is used to control the
engine fuel supply, it shall be capable of manual
Complied P
mechanical operation or of being manually bypassed in
the event of a control circuit failure
11.4.5 Fuel Type Complied P
The type and grade of diesel fuel shall be as specified by
11.4.5.1 Complied P
the engine manufacturer
11.4.6 Static Electricity Complied P
11.5 Engine Exhaust Complied P
11.5.1 Exhaust Manifold Complied P
Exhaust manifolds and turbochargers shall incorporate
provisions to avoid hazard to the operator or to flammable Complied P
material adjacent to the engine
11.5.2 Exhaust Piping Complied P
Each pump engine shall have an independent exhaust
11.5.2.1 Complied P
system.
11.5.3 Exhaust Discharge Location Complied P
11.6 Diesel Engine Driver System Operation Complied P
11.6.1 Weekly Run Complied P
11.6.2 Engine Maintenance Complied P
Engines shall be designed and installed so that they can
be kept clean, dry, and well lubricated to ensure adequate Complied P
performance.
11.6.3 Battery Maintenance Complied P
Storage batteries shall be designed and installed so
11.6.3.1 Complied P
that they can be kept charged at all times
11.6.4 Fuel Supply Maintenance Complied P
11.6.5 Temperature Maintenance Complied P
The temperature of the pump room, pump house, or area
where engines are installed shall be designed so that the
11.6.5.1 Complied P
temperature is maintained at or above the minimum
recommended by the engine manufacturer.
11.6.6 Emergency Starting and Stopping Complied P
12 Engine Drive Controllers PASS
12.1 Application. Complied P
201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 45 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

This chapter provides requirements for minimum

12.1.1 performance of automatic/non automatic diesel engine Complied P
controllers for diesel engine–driven fire pumps
12.1.3 General. Complied P
All controllers shall be specifically listed for diesel
12.1.3.1 Complied P
engine–driven fire pump service
12.1.3.3 Markings. Complied P
All controllers shall be marked “Diesel Engine Fire Pump
Controller ” and shall show plainly the name of the
12.1.3.3.1 manufacturer, the identifying designation, rated Complied P
operating pressure, enclosure type designation, and
complete electrical rating.
12.2 Location. Complied P
12.3 Construction. Complied P
12.3.1 Equipment. Complied P
All equipment shall be suitable for use in locations
12.3.1.1 subject to a moderate degree of moisture, such as a damp Complied P
basement
12.3.2 Mounting. Complied P
12.3.3 Enclosures. Complied P
12.3.3.1 Mounting. Complied P
12.3.3.2 Grounding. Complied P
12.3.4 Locked Lockable Cabinet. Complied P
All switches required to keep the controller in the
automatic position shall be within locked enclosures Complied P
having breakable glass panels.
12.3.5 Connections and Wiring Complied P
12.3.5.1 Field Wiring Complied P
12.3.5.2 Wiring Elements Complied P
Wiring elements of the controller
Complied P
shall be designed on a continuous-duty basis
12.3.5.3 Field Connections Complied P
A diesel engine fire pump controller shall not be used as
12.3.5.3.1 Complied P
a junction box to supply other equipment
12.3.6 Electrical Diagrams and Instructions Complied P
A field connection diagram shall be provided and
12.3.6.1 Complied P
permanently attached to the inside of the enclosure
12.3.7 Marking. Complied P
Each operating component of the controller shall be
2.3.7.1 plainly marked with the identification symbol that appears Complied P
on the electrical schematic diagram
12.3.8 Instructions. Complied P
Complete instructions covering the operation of the
controller shall be provided and conspicuously mounted Complied P
on the controller
12.4 Components. Complied P

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 46 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

12.4.1 Indicators on Controller Complied P

12.4.1.1 All visible indicators shall be plainly visible. Visible P
Visible indication shall be provided to indicate that the
controller is in the automatic position. If the visible
12.4.1.2 Automatic position P
indicator is a pilot lamp, it shall be accessible for
replacement
Separate visible indicators and a common audible fire
pump alarm capable of being heard while the engine is
12.4.1.3 running and operable in all positions of the main switch Complied P
except the off position shall be provided to immediately
indicate the following conditions:
(1) Critically low oil pressure in the lubrication system Complied P
(3) Failure of engine to start automatically Complied P
(4) Shutdown from over speed Complied P
(5) High cooling water temperature Complied P
12.4.2 Signal Devices Remote from Controller Not applicable NA
12.4.2.2 Remote Indication Not applicable NA
Controllers shall be equipped to operate circuits for
remote indication of the conditions covered in 12.4.1.3, Not applicable NA
12.4.1.4, and 12.4.2.3.
12.4.2.3 The remote panel shall indicate the following Not applicable NA
(1) The engine is running (separate signal). Not applicable NA
(2) The controller main switch has been turned to the off
Not applicable NA
or manual position (separate signal).
(3)* There is trouble on the controller or engine (separate
Not applicable NA
or common signals). (See 12.4.1.4 and 12.4.1.5.)
12.4.3 Controller Contacts for Remote Indication Not applicable NA
12.4.4 Pressure Recorder Not applicable NA
12.4.5 Voltmeter. Complied P
Voltmeter with an accuracy of ± 5 percent shall be
provided for each battery bank to indicate the voltage
Complied P
during cranking or to monitor the condition of batteries
used with air-starting engine controllers.
12.5 Battery Recharging Complied P
If an AC power source is not available or is not reliable,
another charging method in addition to the generator or Complied P
alternator furnished with the engine shall be provided.
12.6 Battery Chargers. Complied P
The requirements for battery chargers shall be as follows: Complied P
12.7 Starting and Control. Complied P
12.7.1 Automatic and Non automatic. Complied P
An automatic controller shall be operable also as a non-
12.7.1.1 Complied P
automatic controller.
12.7.2 Automatic Operation of Controller. Complied P
12.7.2.1 Water Pressure Control. Complied P
12.7.2.1.1 Pressure-Actuated Switch. Complied P
12.7.2.2 Fire Protection Equipment Control Complied P
201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 47 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

12.7.2.3 Manual Electric Control at Remote Station Not applicable NA

12.7.2.5 Sequence Starting of Pumps. Complied P
12.7.2.6 External Circuits Connected to Controllers Complied P
12.7.2.7 Automatic Testing. Performed P
12.7.3 Non-automatic Operation of Controller. Complied P
12.7.3.1 Manual Control at Controller. Complied P
12.7.3.2 Manual Testing of Automatic Operation. Complied P
12.7.4 Starting Equipment Arrangement. Complied P
The requirements for starting equipment arrangement
Complied P
shall be as follows
12.7.5 Methods of Stopping. Complied P
12.7.5.1 Manual Electric Shutdown Complied P
12.7.5.2 Automatic Shutdown After Automatic Start. Complied P
12.7.6 Emergency Control Complied P
12.8 Air-Starting Engine Controllers Complied P
12.8.1 Existing Requirements Complied P
12.8.2 Starting Equipment Arrangement Complied P
12.8.3 Manual Shutdown Complied P
13 Steam Turbine Drive PASS
13.1 General. Complied P
13.1.1 Acceptability. Complied P
Steam turbines of adequate power are acceptable prime
13.1.1.1 Complied P
movers for driving fire pumps.
13.1.2 Turbine Capacity Complied P
For steam boiler pressures not exceeding 120 psi (8.3
bar), the turbine shall be capable of driving the pump at
its rated speed and maximum pump load with a pressure
13.1.2.1 Complied P
as low as 80 psi (5.5 bar) at the turbine throttle when
exhausting against atmospheric back pressure with the
hand valve open.
13.1.3 Steam Consumption Complied P
Prime consideration shall be given to the selection of a
13.1.3.1 turbine having a total steam consumption commensurate Complied P
with the steam supply available
13.2 Turbine Complied P
13.2.1 Casing and Other Parts. Complied P
The casing shall be designed to permit access with the
13.2.1.1 Complied P
least possible removal of parts or piping.
13.2.1.3 Main Throttle Valve Complied P
13.2.2 Speed Governor Complied P
The steam turbine shall be equipped with a speed
13.2.2.1 governor set to maintain rated speed at maximum pump Complied P
load
13.2.3 Gauge and Gauge Connections Complied P
13.2.4 Rotor. Complied P
13.2.4.1 The rotor of the turbine shall be of suitable material Complied P

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 48 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

13.2.5 Shaft. Complied P

The shaft of the turbine shall be of high-grade steel,
13.2.5.1 Nickel steel P
such as open-hearth carbon steel or nickel steel
13.2.6 Bearings. Complied P
13.2.6.1 Sleeve Bearings Complied P
13.2.6.2 Ball Bearings. Complied P
14 Acceptance Testing, Performance, and Maintenance PASS
14.1 Hydrostatic Tests and Flushing. Complied P
14.1.1 Flushing. Complied P
Suction piping shall be flushed at a flow rate not less
than indicated in Table 14.1.1.1 or at the hydraulically
14.1.1.1 Complied P
calculated water demand rate of the system, whichever is
greater
14.1.1.2 Flushing shall occur prior to hydrostatic test Performed P
Where the maximum flow available from the water supply
Complied
cannot provide the flow rate provided in Table 14.1.1.1,
14.1.1.3 170 gpm P
the flushing flow rate shall be equal to or greater than
150 percent of rated flow of the connected fire pump.
Where the maximum flow available from the water
supply cannot provide a flow of 150 percent of the rated flow
Complied
14.1.1.3.1 of the pump, the flushing flow rate shall be the greater of 100 P
percent of rated flow of the connected fire pump or the
225 Gpm
maximum flow demand of the fire protection system.
A reduced flushing flow capacity in accordance with 14.1.1.3.1
shall constitute an acceptable test, provided that the flow rate Complied
14.1.1.3.2 P
is as much as can be safely achieved fire protection system 225Gpm
design flow rate.
14.1.2 Hydrostatic Test. Complied P
Suction and discharge piping shall be hydrostatically
tested at not less than 200 psi (13.8 bar) pressure or at
14.1.2.1 Complied P
50 psi (3.4 bar) in excess of the maximum pressure to be
maintained in the system, whichever is greater.
14.1.2.2 The pressure required in 14.1.2.1 shall be maintained 2h
P
for 2 hours. No Leakage
Contractors/
The installing contractor shall furnish a certificate for
purchaser scope
14.1.3 flushing and hydrostatic test prior to the start of the fire P
Acceptance test
pump field acceptance test.
were provided
14.2 Field Acceptance Tests. Complied P
The pump manufacturer, the engine manufacturer (when
supplied), the controller manufacturer, and the transfer
14.2.1 switch manufacturer (when supplied) or their factory Complied P
authorized representatives shall be present for the field
acceptance test. (See Section 4.4.)
14.2.3 Pump Room Electrical Wiring Complied P
All electric wiring to the fire pump motor(s), including
control (multiple pumps) interwiring, normal power Complied P
supply, alternate power supply where provided, and
201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 49 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

jockey pump, shall be completed and checked by the

electrical contractor prior to the initial startup and
acceptance test.
14.2.4 Certified Pump Curve Complied P
A copy of the manufacturer's certified pump test curve
14.2.4.1 shall be available for comparison with the results of the Complied P
field acceptance test.
For water mist positive displacement pumping units, a copy of
Complied
the manufacturer’s certified shop test data for both variable
14.2.4.1.1 See the attached P
speed and non-variable speed operation shall be available for
comparison of the results of the field acceptance test. curve
For self-regulating variable speed fire pump units, a
copy of the manufacturer’s test curves for self-regulating Complied
14.2.4.1.3 variable speed constant boost mode, self-regulating variable See the attached P
speed constant discharge mode, and bypass constant speed curve
mode shall be available.
Discharge orifices shall be listed or constructed to a
14.2.4.1.4 Complied P
recognized standard with a known discharge coefficient.
Requirements for personal protective equipment Complied
14.2.4.1.5 and procedures in accordance with NFPA 70E shall be followed Personal protective P
when working near energized electrical or rotating equipment. equipment
14.2.5 System Demand Complied P
The actual unadjusted fire pump discharge flows and
pressures installed shall meet or exceed the fire Complied P
protection system's demand.
14.2.6 Field Acceptance Test Procedures. Performed P
14.2.6.1 Test Equipment Complied P
Calibrated test equipment shall be provided to determine
14.2.6.1.1 net pump pressures, rate of flow through the pump, volts Complied P
and amperes, and speed.
Automated Inspection and Testing Devices and
14.2.6.2 Complied P
Equipment.
14.2.6.3 Fire Pump Flow Testing(s). Complied P
14.2.6.4 Variable Speed Pumps. Complied P
14.2.6.5 Multistage Multiport Pumps Complied P
14.2.6.6 Measurement Procedure Complied P
14.2.6.6.3 Positive Displacement Pumps Complied P
14.2.6.6.4 Electric Motor–Driven Units Complied P
14.2.6.6.7 Engine-Driven Units Complied P
14.2.6.6.8 Steam Turbine–Driven Units Complied P
14.2.6.6.9 Right Angle Gear Drive Units Complied P
14.2.6.7 Loads Start Test Performed P
14.2.6.8 Phase Reversal Test Complied P
Controller Acceptance Test for Electric and Diesel
14.2.7 Complied P
Driven Units.
14.2.8 Alternate Power Supply Complied P
14.2.9 Emergency Governor for Steam Driven Units Complied P
14.2.10 Simulated Conditions Performed P
201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 50 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

14.2.11 Test Duration 2 Hours P

14.2.12 Electronic Fuel Management (ECM). - NA
A.14.2.6.6 Electrical Input Complied Pass
Voltage and amperes are read
directly from the volt/ammeter. This reading is
compared to the motor nameplate full-load
amperes. The only general calculation is to determine the 1.15x68A
(f) maximum amperes allowed due to the motor service See the power P
factor. In the case of 1.15 service factor, the maximum input table
amperes are approximately 1.15 times motor amperes,
because changes in power factor and efficiency are not
considered.
Record Drawings, Test Reports, Manuals, Special Tools,
14.3 Complied P
and Spare Parts.
One set of record drawings shall be provided to the
14.3.1 Provided P
Building owner.
One copy of the completed test report shall be provided
14.3.2 Provided P
to the building owner.
One set of instruction manuals for all major components
14.3.3 of the fire pump system shall be supplied by the Complied P
manufacturer of each major component
14.3.4 The manual shall contain the following: Complied P
(1) A detailed explanation of the operation of the
Provided P
component
(2) Instructions for routine maintenance Provided P
(3) Detailed instructions concerning repairs Provided P
(4) Parts list and parts identification Complied P
(5) Schematic electrical drawings of controller, transfer
Complied P
switch, and fire pump control panels
(6)* List of recommended spare parts and lubricants Provided P
14.4 Periodic Inspection, Testing, and Maintenance. Complied P
Fire pumps shall be inspected, tested, and maintained in
Complied P
accordance with NFPA 25.
14.5 Component Replacement. Provided P
14.5.1 Positive Displacement Pumps. Provided P
Whenever a critical path component in a positive
14.5.1.1 displacement fire pump is replaced, as defined in Provided P
14.5.2.5, a field test of the pump shall be performed
14.5.1.4 Field Retest Results Complied P
14.5.2 Centrifugal Pumps Complied P
14.5.2.4 Component Replacement. Complied P
14.5.2.7 Field Retests. Perform P
The field retest results shall be compared to the original
14.5.2.7.1 pump performance as indicated by the original factory- Perform P
certified test curve, whenever it is available.

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 51 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

The field retest results shall meet or exceed the

performance characteristics as indicated on the pump
14.5.2.7.2 Complied P
nameplate, and they shall be within the accuracy limits of
field testing as stated elsewhere in this standard.

Overview Sample Marking

Annex A:

Test Description Analysis Result

MOCI Directive 267
Prohibition Of Product With 50hz Frequency And No Country Of Origin Pass
IEC 60034-1
10 Rating Plates Pass
10.2 Marking And Instruction Pass
8 Thermal Performance And Test Pass
9.1.1 Resistance Of The Winding Pass
9.1.6 Direction Of Rotation Pass
9.2 Withstand Voltage Test Pass
11.1 Protective Earthing Of Machines Pass

Res
Clause Test Description Analysis
ult
10 Rating plates Pass
10.1 General Complied P
Every electrical machine shall be provided with a rating
Provided P
plate(s)
201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 52 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

The plates shall be made of durable material and be

Durable P
securely mounted.
The rating plate(s) shall preferably be mounted on the
frame of the machine and be located so as to be easily
Complied P
legible in the position of use determined by the type of
construction and mounting arrangement of the machine.
10.2 Marking Pass
Machines with rated outputs up to and including 750 W (or
VA) and dimensions not covered by IEC 60072 shall be
None N/A
marked with the information given in items 1, 2, 11, 12 and
26 below as a minimum.
For special-purpose and built-in machines with rated
outputs up to and including 3 kW (or kVA) items 1, 2, 11
None N/A
and 12 shall be marked as a minimum & item 26 may be
provided in another form.
1 The manufacturer's name or mark. MAFCO P
2 The manufacturer's serial number or identification mark. 20190115001 P
3 Information to identify the year of manufacture. N/A
4 The manufacturer's machine code. N/A
5 For A.C. machines, the number of phases. 3ph ~ P
The number(s) of the rating and performance standard(s)
6 which are applicable (IEC 60034-X and/or equivalent Complied P
national standard(s)).
The degree of protection provided by the integral design of
7 the rotating electrical machine enclosures (IP code) in IP55 P
accordance with IEC 60034-5.
The thermal class and the limit of temperature or of
8 155(F) P
temperature rise
The class (es) of rating of the machine if designed for other
9 S1/C.W N/A
than rating for continuous running duty.
10 The rated output(s) or range of rated output. 50HP, 37KW, P
11 The rated voltage(s) or range of rated voltage. 220V/380V P
For a.c. machines the rated frequency or range of rated
12 60Hz P
frequency.
13 The rated current(s) or range of rated current. 130 / 67.9 A P
14 The rated speed(s) or range of rated speed. 3500 rpm P
The permissible over speed if other than specified in 9.7.or
15 N/A
the maximum safe operating speed if less than in 9.6.
For d.c. machines with separate excitation or with shunt
16 excitation and for synchronous machines, the rated field AC N/A
voltage and the rated field current.
201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 53 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

17 For a.c. machines, the rated power factor(s). 0.89 PF P

For wound-rotor induction machines, the rated open-circuit
18 N/A
voltage between slip-rings and the rated slip-ring current.
For d.c. motors with armatures intended to be supplied by
19 static power converters, the identification code of the static AC N/A
power converter in accordance with IEC 60971.
The maximum ambient air temperature, if other than 40
20a N/A
°C.
The maximum water coolant temperature, if other than 25
20b N/A
°C.
The minimum ambient air temperature if other than
21 N/A
specified in 6.4.
The altitude for which the machine is designed (if
22 Not for this type N/A
exceeding 1 000 m above sea-level).
For hydrogen-cooled machines, the hydrogen pressure at
23 Not for this type N/A
rated output.
When specified, the approximate total mass of the
24 approximate 124 Kg P
machine, if exceeding 30 kg.
For machines suitable for operation in only one direction of
25 3ph ~ P
rotation, the direction of rotation, indicated by an arrow.
The connecting instructions in accordance with IEC 60034-
26 Complied P
8 by means of a diagram or text located near the terminals.
8 Thermal performance and tests Pass
8.1 Thermal class Complied P
8.4 Temperature rise of a part of a machine Complied P
Temperature rises of windings are determined by the
Complied P
resistance method
R1 is the resistance at the beginning of the test; 1.27 Ω P
R2 is the resistance at the end of the test; 1.71 Ω P
k is equal to 234,5 for copper windings and 225 for
234.5 P
aluminium windings;
t1 is the room temperature at the beginning of the test; 40.2°C P

t2 is the room temperature at the end of the test. 40.5°C P

∆t is the temperature rise of the winding 95.06 P

9 Other performance and tests Pass
9.1.1 Resistance of the winding P
9.1.6 Direction of rotation Complied P
9.2 Withstand voltage test Pass

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 54 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

Insulated windings of rotating machines of rated output

1 less than 1 kW (or kVA) and of rated voltage less than 100 N/A
V.
Insulated windings of rotating machines of rated output
2 N/A
less than 10 000 kW (or kVA).
Insulated windings of rotating machines of rated output 10
3 N/A
000 kW (or kVA).
4 Separately excited field windings of D.C machines. N/A
Field windings of synchronous generators, synchronous
5 N/A
motors and synchronous condenser.
5a Rated field voltage: Complied -

– up to and including 500 V. 220V/380V P

– above 500 V. N/A
When a machine is intended to be started with the field
5b winding short-circuited or connected across a resistance of Complied P
value less than ten times the resistance of the winding.
When a machine is intended to be started either with the
field winding connected across a resistance of value equal
5c to, or more than, ten times the resistance of the winding, N/A
or with the field windings on open circuit with or without a
field-dividing switch.
Secondary (Usually Rotor) windings of induction motors or
6 synchronous induction motors if not permanently short- N/A
circuited.
For non-reversing motors or motors reversible from
6a Complied P
standstill only.
For motors to be reversed or braked by reversing the
6b Marking Provided P
primary supply while the motor is running.
7 Exciters (Except as below) None N/A
Exception 1: Exciters of synchronous motors (Including
synchronous induction motors) if connected to earth or None N/A
disconnected from the field windings during starting.
Exception 2: Separately excited field windings of exciters
None N/A
(See item 4).
8 Electrically interconnected machines and apparatus. Complied P
Devices that are in physical contact with windings, for
example, temperature detectors, shall be tested to the
9 machine frame.During the withstand test on the machine, N/A
all devices in physical contact with the winding shall be
connected to the machine frame.
11.1 Protective earthing of machines Pass

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 55 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

Machines shall be provided with an earthing terminal or

another device to permit the connection of a protective Complied P
conductor or an earthing conductor.
The symbol or legend shall identify this device. Complied P
In the case of machines having rated voltages greater than
50 V a.c. or 120 V d.c., but not exceeding 1 000 V a.c. or 1
500 V d.c., the terminal for the earthing conductor shall be
Complied P
situated in the vicinity of the terminals for the line
conductors, being placed in the terminal box, if one is
provided.
Machines having rated outputs in excess of 100 kW (or kVA)
shall have in addition an earthing terminal fitted on the N/A
frame.
Machines for rated voltages greater than 1 000 V a.c. or 1
N/A
500 V d.c. shall have an earthing terminal on the frame
The earthing terminal shall be designed to ensure a good
connection with the earthing conductor without any Complied P
damage to the conductor or terminal.
When an earthing terminal is provided in the terminal box,
it shall be assumed that the earthing conductor is made of Complied P
the same metal as the live conductors.
For other cross-sectional areas of live conductors, the
earthing or protective conductor shall have a cross- P
sectional area at least equivalent to: see table 19

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 56 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

Overview Sample Marking

Annex B:

Clause Test Description Analysis Result

MOCI Directive 267
Prohibition Of Product With 50hz Frequency And No Country Of Origin Pass
IEC 60034-1
10 Rating Plates Pass
10.2 Marking And Instruction Pass
8 Thermal Performance And Test Pass
9.1.1 Resistance Of The Winding Pass
9.1.6 Direction Of Rotation Pass
9.2 Withstand Voltage Test Pass
11.1 Protective Earthing Of Machines Pass

Res
Clause Test Description Analysis
ult
10 Rating plates Pass
10.1 General Complied P
Every electrical machine shall be provided with a rating
Provided P
plate(s)
The plates shall be made of durable material and be
Durable P
securely mounted.

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 57 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

The rating plate(s) shall preferably be mounted on the

frame of the machine and be located so as to be easily
Complied P
legible in the position of use determined by the type of
construction and mounting arrangement of the machine.
10.2 Marking Pass
Machines with rated outputs up to and including 750 W (or
VA) and dimensions not covered by IEC 60072 shall be
3 KW N/A
marked with the information given in items 1, 2, 11, 12 and
26 below as a minimum.
For special-purpose and built-in machines with rated
outputs up to and including 3 kW (or kVA) items 1, 2, 11
3 KW N/A
and 12 shall be marked as a minimum & item 26 may be
provided in another form.
1 The manufacturer's name or mark. MAFCO P
2 The manufacturer's serial number or identification mark. 20210510529 P
3 Information to identify the year of manufacture. P
4 The manufacturer's machine code. - N/A
5 For A.C. machines, the number of phases. 3ph ~ P
The number(s) of the rating and performance standard(s)
6 which are applicable (IEC 60034-X and/or equivalent N/A
national standard(s)).
The degree of protection provided by the integral design of
7 the rotating electrical machine enclosures (IP code) in IP55 P
accordance with IEC 60034-5.
The thermal class and the limit of temperature or of
8 CL (F) P
temperature rise
The class (es) of rating of the machine if designed for other
9 S1/CW P
than rating for continuous running duty.
10 The rated output(s) or range of rated output. 4HP, 3KW P
11 The rated voltage(s) or range of rated voltage. 220V / 380V P
For a.c. machines the rated frequency or range of rated
12 60Hz P
frequency.
13 The rated current(s) or range of rated current. 10.4/6A P
14 The rated speed(s) or range of rated speed. 3450 rpm P
The permissible over speed if other than specified in 9.7.or
15 3450 rpm P
the maximum safe operating speed if less than in 9.6.
For d.c. machines with separate excitation or with shunt
16 excitation and for synchronous machines, the rated field AC N/A
voltage and the rated field current.
17 For a.c. machines, the rated power factor(s). - -

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 58 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

For wound-rotor induction machines, the rated open-circuit

18 N/A
voltage between slip-rings and the rated slip-ring current.
For d.c. motors with armatures intended to be supplied by
19 static power converters, the identification code of the static AC N/A
power converter in accordance with IEC 60971.
The maximum ambient air temperature, if other than 40
20a N/A
°C.
The maximum water coolant temperature, if other than 25
20b N/A
°C.
The minimum ambient air temperature if other than
21 N/A
specified in 6.4.
The altitude for which the machine is designed (if
22 1000 m P
exceeding 1 000 m above sea-level).
For hydrogen-cooled machines, the hydrogen pressure at
23 N/A
rated output.
When specified, the approximate total mass of the
24 approximate 62 Kg P
machine, if exceeding 30 kg.
For machines suitable for operation in only one direction of
25 3ph ~ P
rotation, the direction of rotation, indicated by an arrow.
The connecting instructions in accordance with IEC 60034-
26 Complied P
8 by means of a diagram or text located near the terminals.
8 Thermal performance and tests Pass
8.1 Thermal class P
8.4 Temperature rise of a part of a machine P
Temperature rises of windings are determined by the
Complied P
resistance method
R1 is the resistance at the beginning of the test; 1.22 Ω P

R2 is the resistance at the end of the test; 1.51 Ω P

k is equal to 234,5 for copper windings and 225 for
274.3 P
aluminium windings;
t1 is the room temperature at the beginning of the test; 40.1°C P

t2 is the room temperature at the end of the test. 40.4°C P

∆t is the temperature rise of the winding 65.20 P

9 Other performance and tests Complied P
9.1.1 Resistance of the winding Complied P
9.1.6 Direction of rotation Complied P
9.2 Withstand voltage test Pass
Insulated windings of rotating machines of rated output
1 Not for this type N/A
less than 1 kW (or kVA) and of rated voltage less than 100

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 59 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

V.

Insulated windings of rotating machines of rated output

2 N/A
less than 10 000 kW (or kVA).
Insulated windings of rotating machines of rated output 10
3 N/A
000 kW (or kVA).
4 Separately excited field windings of D.C machines. N/A
Field windings of synchronous generators, synchronous
5 N/A
motors and synchronous condenser.
5a Rated field voltage: Complied -

– up to and including 500 V. 220V/380V N/A

– above 500 V. N/A

When a machine is intended to be started with the field
5b winding short-circuited or connected across a resistance of Complied P
value less than ten times the resistance of the winding.
When a machine is intended to be started either with the
field winding connected across a resistance of value equal
5c to, or more than, ten times the resistance of the winding, N/A
or with the field windings on open circuit with or without a
field-dividing switch.
Secondary (Usually Rotor) windings of induction motors or
6 synchronous induction motors if not permanently short- N/A
circuited.
For non-reversing motors or motors reversible from
6a Complied P
standstill only.
For motors to be reversed or braked by reversing the
6b Marking Provided P
primary supply while the motor is running.
7 Exciters (Except as below) None N/A
Exception 1: Exciters of synchronous motors (Including
synchronous induction motors) if connected to earth or None N/A
disconnected from the field windings during starting.
Exception 2: Separately excited field windings of exciters
None N/A
(See item 4).
8 Electrically interconnected machines and apparatus. Complied P
Devices that are in physical contact with windings, for
example, temperature detectors, shall be tested to the
9 machine frame.During the withstand test on the machine, N/A
all devices in physical contact with the winding shall be
connected to the machine frame.
11.1 Protective earthing of machines Pass

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 60 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

Machines shall be provided with an earthing terminal or

another device to permit the connection of a protective Complied P
conductor or an earthing conductor.
The symbol or legend shall identify this device. Complied P
In the case of machines having rated voltages greater than
50 V a.c. or 120 V d.c., but not exceeding 1 000 V a.c. or 1
500 V d.c., the terminal for the earthing conductor shall be
220V / 380V P
situated in the vicinity of the terminals for the line
conductors, being placed in the terminal box, if one is
provided.
Machines having rated outputs in excess of 100 kW (or kVA)
shall have in addition an earthing terminal fitted on the 3 KW N/A
frame.
Machines for rated voltages greater than 1 000 V a.c. or 1
N/A
500 V d.c. shall have an earthing terminal on the frame
The earthing terminal shall be designed to ensure a good
connection with the earthing conductor without any Complied P
damage to the conductor or terminal.
When an earthing terminal is provided in the terminal box,
it shall be assumed that the earthing conductor is made of Complied P
the same metal as the live conductors.
For other cross-sectional areas of live conductors, the
earthing or protective conductor shall have a cross- P
sectional area at least equivalent to: see table 19

Overview Sample Marking

SASO GSO IEC 60529:2015

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 61 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

Clause Test Description Analysis Result

MOCI Directive 267
Prohibition Of Product With 50hz Frequency And No Country Of Origin Pass
SASO GSO IEC 60529:2015
13.4 + 13.5 IP First numerical degree Pass
14.2.5 IP Second numerical degree Pass

Clause Test Description Analysis Result

SASO GSO IEC 60529:2015
13.4 DUST TEST FOR FIRST CHARACTERISTIC NUMERALS 5 AND 6 Pass
The test is made using a dust chamber incorporating the
basic principles shown in figure 2 whereby the powder
circulation pump may be placed by other means suitable
to maintain the talcum powder in suspension in a closed
test chamber. The talcum powder used shall be able to
Performed on pump
pass through a square meshed sieve the nominal wire Pass
control numeral 5
diameter of which is 50 µm and the minimal width of a
gap between wires 75 µm. The amount of the talcum
powder to be used is 2 kg per cubic meter of the test
chamber volume. It shall not have been used for more
than 20 tests.
Enclosure are of necessity in one of two categories: P
Category 1: Enclosures where the nominal working cycle
of the equipment causes reductions in air pressure
Category 2 NA
within the enclosure below that of the surrounding air,
for example, due to thermal cycling effects.
Category 2: Enclosures where no pressure difference
Category 2 Pass
relative to the surrounding air is present.
Category 1 enclosures:
The enclosure under test is supported inside the test
chamber and the pressure inside the enclosure is
maintained below the surrounding atmospheric pressure
by a vacuum pump. The suction connection shall be Category 2 NA
made to a hole specially provided for this test. If not
otherwise specified in the relevant product standard,
this hole shall be in the vicinity of the vulnerable parts.
If it is impracticable to make a special hole, the suction
connection shall be made for the cable inlet hole. If
there are holes (for example, more able inlet holes or Category 2 NA
drain-holes) these shall be treated as intended for
normal use on site.
The object of the test is to draw into the enclosure, be
means of depression, a volume of air 80 times the Category 2 NA
volume of the sample enclosure tested without
201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 62 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

Clause Test Description Analysis Result

exceeding the extraction rate of 60 volumes per hour.
In no event shall the volume of extraction exceed 2 kPa
(20 mbar) on the manometer shown in figure 2.
If an extraction rate of 40 to 60 volumes per hour is
Category 2 NA
obtained the duration of the test is 2 h.
If, with a maximum depression of 2 kPa (20 mbar), the
extraction rate is less than 40 volumes per hour, the test
Category 2 NA
is continued until 80 volumes have been drawn through,
or a period of 8 h has elapse.
Category 2 enclosures:
The enclosure under test is supported under its normal
operating position inside the test chamber, but is not
Performed for 8
connected to a vacuum pump. Any drain-hole normally Pass
hours
open shall be left open for the duration of the test. The
test shall be continued for a period of 8 hours.
Category 1 an category 2 enclosures:
If it is impracticable to test the complete enclosure in
Enclosure tested with
the test chamber, one of the following procedures shall NA
metal pole
be applied:
- Testing of individually enclosed sections of the
NA
enclosure;
- Testing of representative parts of the enclosure,
comprising components such as doors, ventilation
NA
openings, joints, shafts seals, etc, in position during
test;
- Testing of a smaller enclosure having the full scale
NA
design details.
In the last two cases, the volume of air to be drawn
through the enclosure under test shall be the same as NA
for the whole enclosure in full scale.
13.5 Special conditions for first characteristic numeral 5
13.5.1 Test conditions for first characteristic numeral 5
The enclosure shall be deemed category 1 unless the
relevant product standard for the equipment specifies Category 2 NA
that the enclosure is category 2.
13.5.2 Acceptance condition for the first characteristic numeral 5 Pass
The protection is satisfactory if, on inspection, talcum
powder has not accumulated in a quantity or location
Complied / Not
such that, as with any other kind of dust, it could
accumulated in
interfere with the correct operation of the equipment or
quantity that could Pass
impair safety. Except for special cases to be clearly
interfere with correct
specified in the relevant product standard, no dust shall
operation.
deposit where it could lead to tracking along the
creepage distances.
14.2.5 IP SECOND NUMERICAL DEGREE (5: PROTECTED AGAINST WATER JET) PASS
201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 63 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

Clause Test Description Analysis Result

Test for second characteristic numeral 5 with 6.3mm
6.3mm jet nozzle Pass
nozzle.
The conditions to be observe are as follows: Performed Pass
- Internal diameter of nozzle: 6.3 mm; Complied Pass
- Delivery rate: 12.5l/min ± 5%; 6.3 mm Pass
- Water pressure: to be adjusted to achieve the
Complied Pass
specified delivery rate;
- Core of the substantial stream: circle of
approximately 40 mm diameter at 2.5 m Adjusted Pass
distance from nozzle;
- Test duration per square meter of enclosure
Complied Pass
surface area likely to be sprayed: 1 min;
- Minimum test duration: 3 min.; 3 minutes (minimum) Pass
- Distance from nozzle to enclosure surface:
Complied Pass
between 2.5 m and 3 m.
14.3 Acceptance condition - Pass
After the test in accordance with the appropriate
requirements of 14.2.1 to 14.2.9, the enclosure shall be - Pass
inspected for ingress of water.
It is the responsibility of the relevant technical
committee to specify the amount of water which may be
Inspected Pass
allowed to enter the enclosure and the details of a
dielectric strength test, if any.
In general, if any water has entered, it shall not: Complied Pass
- Be sufficient to interfere with the correct
Complied Pass
operation of the equipment or impair safety;
- Deposit on insulation parts where it could lead
Complied Pass
to tracking along the creepage distances;
- Reach live parts or wingdings not designed to
Complied Pass
operate when wet.
- Accumulate near the cable end or enter the cable
Complied Pass
if any.
If the enclosure is provided with drain-holes, it should
be proved be inspection that any water which enters
Complied Pass
does not accumulate and that it drains away without
doing any harm to the equipment.
For enclosure without drain-holes, the relevant product
standard shall specify the acceptance conditions if water No drain holes NA
can accumulate to reach live parts.

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 64 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

Overview Sample IP6X result

IPX5 test IPX5 result

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 65 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

Annex C:
Table of the models:

Model(s )

MAF50DJ , MAF120DJ , MAF120DJE , MAF250DJ , MAF250DJE , MAF350DJ , MAF350DE , MAF500DJ,

AF500DJE , MAF750DJE , MAF750DJE , MAF1000DJE , AF1250DJE , MAF1500DJE , MAF2000DJE

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 66 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

Annex D

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 67 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 68 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 69 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

Annex E
Factory reports:

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 70 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 71 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 72 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
 Electrical Products Testing
Laboratory – Riyadh

TEST REPORT
Report #: SJ-276904 Report Date: Feb 28, 2022

- END OF TEST REPORT -

201st St. 2nd Industrial City, Riyadh, Kingdom of Saudi Arabia Page 73 of 73
Tel (+966920029293) F/7.8/01.07 Rev. 00 28/09/2021
‫ﺭﻗﻢ ﻧﺴﺨﺔ ﺍﻟﺘﺮﺧﻴﺺ ‪License Version No. 1‬‬

‫ﺷﻬﺎﺩﺓ ﺗﺮﺧﻴﺺ ﺑﺎﺳﺘﻌﻤﺎﻝ ﻋﻼﻣﺔ ﺍﻟﺠﻮﺩﺓ‬

‫‪License to use the Quality Mark‬‬

‫‪License No.‬‬ ‫‪QM2312000088‬‬ ‫ﺭﻗﻢ ﺍﻟﺘﺮﺧﻴﺺ‬

‫‪SASO affirms that this facility has fulfilled the highest product‬‬ ‫ﺗﺸﻬﺪ ﺍﻟﻬﻴﺌﺔ ﺍﻟﺴﻌﻮﺩﻳﺔ ﻟﻠﻤﻮﺍﺻﻔﺎﺕ ﻭﺍﻟﻤﻘﺎﻳﻴﺲ ﻭﺍﻟﺠﻮﺩﺓ ﺑﺄﻥ ﻫﺬﻩ ﺍﻟﻤﻨﺸﺄﺓ ﻗﺪ ﺣﻘﻘﺖ‬
‫‪conformity requirements and has been granted the license to use‬‬ ‫ﺃﻋﻠﻰ ﻣﻌﺎﻳﻴﺮ ﺍﻟﻤﻄﺎﺑﻘﺔ ﻟﻠﻤﻨﺘﺠﺎﺕ ﻭﻋﻠﻴﻪ ﺗﻢ ﺗﺮﺧﻴﺼﻬﺎ ﺑﺎﺳﺘﻌﻤﺎﻝ ﺷﻌﺎﺭ ﻋﻼﻣﺔ ﺍﻟﺠﻮﺩﺓ‬
‫‪the Saudi quality mark on the products listed in this certificate.‬‬ ‫ﺍﻟﺴﻌﻮﺩﻳﺔ ﻋﻠﻰ ﺍﻟﻤﻨﺘﺠﺎﺕ ﺍﻟﻤﺬﻛﻮﺭﺓ ﻓﻲ ﻫﺬﻩ ﺍﻟﺸﻬﺎﺩﺓ‪.‬‬

‫‪The Facility‬‬ ‫ﻣﺼﻨﻊ ﻣﺎﺯﻥ ﻋﺒﺪﺍﻟﺴﻼﻡ ﺟﺪﻳﺪ ﻟﺘﺼﻨﻴﻊ ﻣﻌﺪﺍﺕ ﺍﻟﺴﻼﻣﺔ‬ ‫ﺍﻟﻤﻨﺸﺄﺓ‬

‫‪Facility Address‬‬ ‫ﺟﺪﺓ ‪ -‬ﺍﻟﻤﻨﻄﻘﺔ ﺍﻟﺼﻨﺎﻋﻴﺔ ‪ -‬ﺍﻟﻤﺮﺣﻠﺔ ﺍﻟﺜﺎﻟﺜﺔ‬ ‫ﻣﻮﻗﻊ ﺍﻟﻤﻨﺸﺄﺓ‬

‫‪Production Line address‬‬ ‫ﺟﺪﺓ ‪ -‬ﺍﻟﻤﻨﻄﻘﺔ ﺍﻟﺼﻨﺎﻋﻴﺔ ‪ -‬ﺍﻟﻤﺮﺣﻠﺔ ﺍﻟﺜﺎﻟﺜﺔ‬ ‫ﻣﻮﻗﻊ ﺧﻂ ﺍﻹﻧﺘﺎﺝ‬

‫‪Products in the license‬‬ ‫‪1‬‬ ‫ﻋﺪﺩ ﺍﻟﻤﻨﺘﺠﺎﺕ ﻓﻲ ﺍﻟﺘﺮﺧﻴﺺ‬

‫‪License Issue Date‬‬ ‫‪18/12/2023‬‬ ‫ﺗﺎﺭﻳﺦ ﺇﺻﺪﺍﺭ ﺍﻟﺘﺮﺧﻴﺺ‬

‫‪License Renewal Date‬‬ ‫‪-‬‬ ‫ﺗﺎﺭﻳﺦ ﺗﺠﺪﻳﺪ ﺍﻟﺘﺮﺧﻴﺺ‬

‫‪License Expiry Date‬‬ ‫‪18/12/2026‬‬ ‫ﺗﺎﺭﻳﺦ ﺍﻧﺘﻬﺎﺀ ﺍﻟﺘﺮﺧﻴﺺ‬

‫ﻟﻠﺘﺄﻛﺪ ﻣﻦ ﺻﺤﺔ ﻫﺬﺓ ﺍﻟﺸﻬﺎﺩﺓ ﻳﺮﺟﻰ ﺯﻳﺎﺭﺓ ﻣﻮﻗﻌﻨﺎ ﻋﻠﻰ ﺍﻹﻧﺘﺮﻧﺖ‪ ،‬ﻭﺃﻱ ﻛﺸﻂ ﺃﻭ ﺗﻐﻴﻴﺮ ﻓﻲ ﻫﺬﻩ ﺍﻟﺸﻬﺎﺩﺓ ﻳﻠﻐﻴﻬﺎ‪.‬‬
‫‪To verify this certification visit SASO website, and any changes or modification on this certificate will affect its validity.‬‬
‫ﺍﻟﻤﻤﻠﻜﺔ ﺍﻟﻌﺮﺑﻴﺔ ﺍﻟﺴﻌﻮﺩﻳﺔ‬ ‫ﺍﻟﺮﻳﺎﺽ ‪11471‬‬ ‫ﺹ‪.‬ﺏ ‪3437‬‬ ‫‪T 920009085‬‬ ‫‪www.saso.gov.sa‬‬
‫‪Kingdom of SaudiArabia‬‬ ‫‪P.O.Box 3437‬‬ ‫‪Riyadh 11471‬‬ ‫‪F +966114520086‬‬ ‫‪info@saso.gov.sa‬‬

‫‪1/2‬‬
 ‫‪Appendix Version No.‬‬ ‫ﺭﻗﻢ ﻧﺴﺨﺔ ﺍﻟﻤﻠﺤﻖ ‪1‬‬ ‫‪Appendix No.‬‬ ‫ﺭﻗﻢ ﺍﻟﻤﻠﺤﻖ‪1‬‬

‫ﻣﻠﺤﻖ ﺷﻬﺎﺩﺓ ﺗﺮﺧﻴﺺ ﺑﺎﺳﺘﻌﻤﺎﻝ ﻋﻼﻣﺔ ﺍﻟﺠﻮﺩﺓ‬

‫)‪Appendix (License to use the Quality Mark‬‬

‫‪The Facility‬‬ ‫ﻣﺼﻨﻊ ﻣﺎﺯﻥ ﻋﺒﺪﺍﻟﺴﻼﻡ ﺟﺪﻳﺪ ﻟﺘﺼﻨﻴﻊ ﻣﻌﺪﺍﺕ ﺍﻟﺴﻼﻣﺔ‬ ‫ﺍﻟﻤﻨﺸﺄﺓ‬

‫‪License No‬‬ ‫‪QM2312000088‬‬ ‫ﺭﻗﻢ ﺍﻟﺘﺮﺧﻴﺺ‬

‫‪License Issue Date‬‬ ‫‪18/12/2023‬‬ ‫ﺗﺎﺭﻳﺦ ﺇﺻﺪﺍﺭ ﺍﻟﺘﺮﺧﻴﺺ‬

‫‪License Expiry Date‬‬ ‫‪18/12/2026‬‬ ‫ﺗﺎﺭﻳﺦ ﺍﻧﺘﻬﺎﺀ ﺍﻟﺘﺮﺧﻴﺺ‬

‫‪Product‬‬ ‫ﺍﻟﻤﻀﺨﺎﺕ ﺍﻟﺜﺎﺑﺘﺔ ﻟﻠﺤﻤﺎﻳﺔ ﻣﻦ ﺍﻟﺤﺮﻳﻖ‬ ‫ﺍﻟﻤﻨﺘﺞ‬

‫‪Reference Standard‬‬ ‫‪SASO NFPA 20‬‬ ‫ﺍﻟﻤﻮﺍﺻﻔﺔ ﺍﻟﻘﻴﺎﺳﻴﺔ‬

‫ﺗﺎﺭﻳﺦ ﺍﻟﻤﻨﺢ‪/‬ﺍﻟﺘﺠﺪﻳﺪ‪/‬ﺍﻟﺘﻮﺳﻴﻊ‬ ‫ﺍﻟﻌﻼﻣﺔ ﺍﻟﺘﺠﺎﺭﻳﺔ‬ ‫ﺍﻟﺼﻨﻒ‬ ‫ﻡ‬

‫‪Date of Grant/Renewal/Extension‬‬ ‫‪Trademark‬‬ ‫‪Classification‬‬ ‫‪No.‬‬
‫‪18/12/2023‬‬ ‫ﻣﺎﻓﻜﻮ‬ ‫ﺍﻟﻤﻀﺨﺎﺕ ﺍﻟﺜﺎﺑﺘﺔ ﻟﻠﺤﻤﺎﻳﺔ ﻣﻦ ﺍﻟﺤﺮﻳﻖ‬ ‫‪1‬‬

‫ﻟﻠﺘﺄﻛﺪ ﻣﻦ ﺻﺤﺔ ﻫﺬﺓ ﺍﻟﺸﻬﺎﺩﺓ ﻳﺮﺟﻰ ﺯﻳﺎﺭﺓ ﻣﻮﻗﻌﻨﺎ ﻋﻠﻰ ﺍﻹﻧﺘﺮﻧﺖ‪ ،‬ﻭﺃﻱ ﻛﺸﻂ ﺃﻭ ﺗﻐﻴﻴﺮ ﻓﻲ ﻫﺬﻩ ﺍﻟﺸﻬﺎﺩﺓ ﻳﻠﻐﻴﻬﺎ‪.‬‬
‫‪To verify this certification visit SASO website, and any changes or modification on this certificate will affect its validity.‬‬

‫ﺍﻟﻤﻤﻠﻜﺔ ﺍﻟﻌﺮﺑﻴﺔ ﺍﻟﺴﻌﻮﺩﻳﺔ‬ ‫ﺍﻟﺮﻳﺎﺽ ‪11471‬‬ ‫ﺹ‪.‬ﺏ ‪3437‬‬ ‫‪T 920009085‬‬ ‫‪www.saso.gov.sa‬‬
‫‪Kingdom of SaudiArabia‬‬ ‫‪P.O.Box 3437‬‬ ‫‪Riyadh 11471‬‬ ‫‪F +966114520086‬‬ ‫‪info@saso.gov.sa‬‬
‫‪2/2‬‬