TFT-DISPLAY DATASHEET

LG Display
Model: LD490EQE-FKA1

BRIEF SPEC.:
Main Feature Wide Viewing Angle
High Color Gamut

Active Screen Area 1073.80 x 604.00 (mm)

Diagonal | Format 49” | 16:9
Resolution 3840 X 2160
Colors 10Bit 1.07 B colors
Backlight LED
Brightness 500 cd/m²
LED Life Time 50k (h)
Interface Vby1
Viewing Angle 89/89 L/R 89/89
Touchscreen no
Power Supply 12 V
Module Outline 1097.2 x 630.0 x 12.0 (mm)
Operation Temperature - 0… +50 °C
Storage Temperature - 20… +60 °C
Surface Treatment Hardcoating 2H Antiglare

HY-LINE Computer Components Vertriebs GmbH Tel.: +49 89 614 503 40 | Fax: +49 89 614 503 50
Inselkammerstr. 10, 82008 Unterhaching bei München computer@hy-line.de | www.hy-line.de/computer
 LD490EQE

Product Specification

SPECIFICATION
FOR
APPROVAL

( ) Preliminary Specification

( ● ) Final Specification

Title 49.0” QWUXGA TFT LCD

BUYER General SUPPLIER LG Display Co., Ltd.

SET MODEL *MODEL LD490EQE

SUFFIX FKA1(RoHS Verified)

SIGNATURE SIGNATURE
APPROVED BY APPROVED BY
DATE DATE

/ SungJun Lee / Team Leader

REVIEWED BY

/ Jikyoung Kim / Project Leader

PREPARED BY
/ Hyunjin Kim / Engineer

Please return 1 copy for your confirmation with

TV Product Development Dept.
your signature and comments. LG Display Co., Ltd.

Ver. 1.0 1 / 33
 LD490EQE

Product Specification

CONTENTS
Number ITEM Page
COVER 1

CONTENTS 2
RECORD OF REVISIONS 3

1 GENERAL DESCRIPTION 4

2 ABSOLUTE MAXIMUM RATINGS 5

3 ELECTRICAL SPECIFICATIONS 6

3-1 ELECTRICAL CHARACTERISTICS 6

3-2 INTERFACE CONNECTIONS 8

3-3 SIGNAL TIMING SPECIFICATIONS 10

3-4 V by Oone SIGNAL SPECIFICATIONS 11

3-5 COLOR DATA REFERENCE 13

3-6 POWER SEQUENCE 14

4 OPTICAL SPECIFICATIONS 15

5 MECHANICAL CHARACTERISTICS 19

6 RELIABILITY 22

7 INTERNATIONAL STANDARDS 23

7-1 Safety 23

7-2 ENVIRONMENT 23
8 PACKING 24
8-1 INFORMATION OF LCM LABEL 24
8-2 PACKING FORM 24

9 PRECAUTIONS 25

9-1 MOUNTING PRECAUTIONS 25

9-2 OPERATING PRECAUTIONS 25

9-3 ELECTROSTATIC DISCHARGE CONTROL 26
9-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE 26
9-5 STORAGE 26
9-6 HANDLING PRECAUTIONS FOR PROTECTION FILM 26
9-7 Appropriate Condition for Commercial Display 27

Ver. 1.0 2 / 33
 LD490EQE

Product Specification

RECORD OF REVISIONS

Revision No. Revision Date Page Description

0.1 2018.04.22 - Preliminary Specification (First Draft)
0.2 2018.10.01 6 Electrical Characteristics Update
0.3 2019.01.10 14 T5:13
1.0 2019.02.19 Final Specification
1.1 2019.05.03 4 Possible Display Type Update

Ver. 1.0 3 / 33
 LD490EQE

Product Specification

1. General Description
The LD490EQE is a Color Active Matrix Liquid Crystal Display with an integral Light Emitting Diode (LED)
backlight system. The matrix employs a-Si Thin Film Transistor as the active element.
It is a transmissive display type which is operating in the normally black mode. It has a 48.50 inch diagonally
measured active display area with QWUXGA resolution (2160 vertical by 3840 horizontal pixel array).
Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arrayed in vertical stripes.
Gray scale or the luminance of the sub-pixel color is determined with a 10-bit gray scale signal for each dot.
Therefore, it can present a palette of more than 1.07Bilion colors.
It has been designed to apply the 10-bit 8 Lane V by One interface.
It is intended to support LCD TV, PCTV where high brightness, super wide viewing angle, high color gamut,
high color depth and fast response time are important.

EPI(RGB)
EEPROM
Source Driver Circuit
Vby1 SCL SDA S1 S3840
1~8lane
G1
Bit
select CN1
(51pin) Option
signal Timing Controller
HTPDN
LOCKN
Vby1 Rx + L/D +DGA + ODC
Control TFT - LCD Panel
Vby1 I2C Signals (3840 x 2160 pixels)
8lane
[Gate In Panel]
+12V
Power Circuit
Power Signals G2160
Block

LED Anode BACKLIGHT ASSEMBLY

CN1 (8pin)
LED Cathode CN2 (8pin)

General Features
Active Screen Size 48.50 inches(1232.0mm) diagonal
Outline Dimension 1097.2(H) X 630.0(V) X 12.0(D)
Pixel Pitch 0.27963 [mm] × 0.27963 [mm]
Pixel Format 3840 horiz. by 2160 vert. Pixels.
Color Depth 10bit(D), 1.07Billon colors
Luminance, White 500cd/m2 (Center 1point ,Typ.)
Viewing Angle (CR>10) Viewing angle free ( R/L 178 (Min.), U/D 178 (Min.))
Total 86.63W (Typ.)
Power Consumption
[Logic= 13.56 W (Typ.) , BLU=73.07W (IF_cathode=90mA, LED Only) ]
Weight 11.2Kg (Typ), 12.4Kg(Max)
Display Mode Transmissive mode, Normally black
Surface Treatment Hard coating(2H), Anti-glare treatment of the front polarizer (Haze 28%(Typ.))
Possible Display Type Landscape and Portrait Enabled (counter clock wised or clock wised)

Ver. 1.0 4 / 33
 LD490EQE

Product Specification

2. Absolute Maximum Ratings

The following items are maximum values which, if exceeded, may cause faulty operation or permanent damage
to the LCD module.

Table 1. ABSOLUTE MAXIMUM RATINGS

Value
Parameter Symbol Unit Note
Min Max

Power Input Voltage LCD Circuit VLCD -0.3 +14.0 VDC

1
LED Input Voltage Forward Voltage VF - 150.3 VDC

T-Con Option Selection Voltage VLOGIC -0.3 +4.0 VDC

Operating Temperature TOP 0 +50 °C
2,3
Storage Temperature TST -20 +60 °C
Panel Front Temperature TSUR - +68 °C 4
Operating Ambient Humidity HOP 10 90 %RH
2,3
Storage Humidity HST 5 90 %RH

Notes 1. Ambient temperature condition (Ta = 25  2 °C )

2. Temperature and relative humidity range are shown in the figure below.
Wet bulb temperature should be Max 39°C, and no condensation of water.
3. Gravity mura can be guaranteed below 40°C condition.
4. The maximum operating temperatures is based on the test condition that the surface temperature
of display area is less than or equal to 68°C with LCD module alone in a temperature controlled chamber.
Thermal management should be considered in final product design to prevent the surface temperature of
display area from being over 68℃. The range of operating temperature may be degraded in case of
improper thermal management in final product design.
90%

60
60%

50 Storage
Humidity [(%)RH]

Wet Bulb
Temperature [°C]
40
40%
Operation
30
20
10
0
10%
5%

-20 0 10 20 30 40 50 60 70 80

Dry Bulb Temperature [°C]

Ver. 1.0 5 / 33
 LD490EQE

Product Specification

3. Electrical Specifications
3-1. Electrical Characteristics
It requires two power inputs. One is employed to power for the LCD circuit. The other Is used for the LED
backlight and LED Driver circuit.

Table 2. ELECTRICAL CHARACTERISTICS

Value
Parameter Symbol Unit Note
Min Typ Max

Circuit :

Power Input Voltage VLCD 10.8 12.0 13.2 VDC

- 1130 1470 mA 1
Power Input Current ILCD
- 1600 2080 mA 2
T-CON Option Input High Voltage VIH 2.7 - 3.6 VDC
Selection Voltage Input Low Voltage VIL 0 - 0.7 VDC
- 13.56 17.62 Watt 1
Power Consumption PLCD
19.2 25.0 Watt 2

Rush current IRUSH - - 10.0 A 3

notes
1. The specified current and power consumption are under the VLCD=12.0V, Ta=25  2°C, fV=60Hz
condition, and mosaic pattern(8 x 6) is displayed and f V is the frame frequency.
2. The current is specified at the maximum current pattern.
3. The duration of rush current is about 2ms and rising time of power input is 0.5ms (min.).
4. Ripple voltage level is recommended under ±5% of typical voltage

White : 1023 Gray

Black : 0 Gray

R G B R G B R G B R G B
R G B R G B R G B R G B
R G B R G B R G B R G B
R G B R G B R G B R G B
R G B R G B R G B R G B
R G B R G B R G B R G B
R G B R G B R G B R G B
R G B R G B R G B R G B
Mosaic Pattern(8 x 6) Max Current Pattern

Ver. 1.0 6 / 33
 LD490EQE

Product Specification
Table 3. ELECTRICAL CHARACTERISTICS (Continue) Ta = 25±2℃, On Duty 100%
Values
Parameter Symbol Unit Note
Min Typ Max
Backlight Assembly :
Forward Current Anode IF (anode) 270 mAdc
2, 3
(one array) Cathode IF (cathode) 85.5 90 94.5 mAdc
Forward Voltage VF 130.3 135.3 140.3 Vdc 4
Forward Voltage Variation △VF 1.7 Vdc 5
Power Consumption PBL - 73.07 - 6
Burst Dimming Duty On duty 1 100 %
Burst Dimming Frequency 1/T 95 182 Hz 8
LED Array : (APPENDIX-V)
Life Time 30,000 50,000 Hrs 7

Notes :The design of the LED driver must have specifications for the LED array in LCD Assembly.
The electrical characteristics of LED driver are based on Constant Current driving type.
The performance of the LED in LCM, for example life time or brightness, is extremely influenced by the
characteristics of the LED Driver. So, all the parameters of an LED driver should be carefully designed.
When you design or order the LED driver, please make sure unwanted lighting caused by the mismatch of the
LED and the driver (no lighting, flicker, etc) has never been occurred. When you confirm it, the LCD–
Assembly should be operated in the same condition as installed in your instrument.
1. Electrical characteristics are based on LED Array specification.
2. Specified values are defined for a Backlight Assembly. (IBL :2 LED array/LCM)
Electrical characteristics are determined after the unit has been ‘On’ and stable for approximately 60min at
25±2℃. The specified temperature, optical and power consumption are under the typical supply input voltage,
current & VBR (duty : 100%), it is total power consumption.
3. Each LED array has one anode terminal and three cathode terminals.
The forward current(IF) of the anode terminal is 270mA and it supplies 90mA into an one strings, respectively
1string( 22LED PKG)

270mA Cathode #1
°°°
90mA
°°°

Anode#1 1 Array (3 Strings)

°°° Cathode #3
90mA
270mA
°°° Cathode #1
°°°

Anode#2 90mA

°°° Cathode #3
90mA
4. The forward voltage(VF) of LED array depends on ambient temperature (Appendix-V)
5. ΔVF means Max VF-Min VF in one Backlight. So VF variation in a Backlight isn’t over Max. 1.7V based on duty
100%
6. Maximum level of power consumption is measured at initial turn on.
Typical level of power consumption is measured after 1hrs aging at 25  2°C.
7. The life time is determined as the time at which brightness of the LED is 50% compared to that of
initial value at the typical LED current on condition of continuous operating at 25  2°C, based on duty 100%.
8. The reference method of burst dimming duty ratio.
It is recommended to use synchronous V-sync frequency to prevent waterfall (Vsync * 1 =Burst Frequency)
Though PWM frequency is over 182Hz (max252Hz), function of backlight is not affected.

Ver. 1.0 7 / 33
 LD490EQE

Product Specification

3-2. Interface Connections

This LCD module employs three kinds of interface connection, 51-pin connector is used for the module
electronics and 8-pin, 8-pin connectors are used for the integral backlight system.
3-2-1. LCD Module
- LCD Connector(CN1): FI-RE51S-HF (manufactured by JAE)
GT05P-51S-H38 (manufactured by LSM)
IS050-C51B-C39-C (manufactured by UJU)
Table 4. MODULE CONNECTOR(CN1) PIN CONFIGURATION
No Symbol Description No Symbol Description
1 VLCD Power Supply +12.0V 27 GND Ground
2 VLCD Power Supply +12.0V 28 Rx0n V-by-One HS Data Lane 0
3 VLCD Power Supply +12.0V 29 Rx0p V-by-One HS Data Lane 0
4 VLCD Power Supply +12.0V 30 GND Ground
5 VLCD Power Supply +12.0V 31 Rx1n V-by-One HS Data Lane 1
6 VLCD Power Supply +12.0V 32 Rx1p V-by-One HS Data Lane 1
7 VLCD Power Supply +12.0V 33 GND Ground
8 VLCD Power Supply +12.0V 34 Rx2n V-by-One HS Data Lane 2
9 NC NO CONNECTION 35 Rx2p V-by-One HS Data Lane 2
10 GND Ground 36 GND Ground
11 GND Ground 37 Rx3n V-by-One HS Data Lane 3
12 GND Ground 38 Rx3p V-by-One HS Data Lane 3
13 GND Ground 39 GND Ground
14 PWM TIN External VBR (From System) 40 Rx4n V-by-One HS Data Lane 4
15 PWM TOUT External VBR (For System) 41 Rx4p V-by-One HS Data Lane 4
Vx1 Input Data Format
16 Input Mode
‘L’=Non-Division , ‘H’=2-Division
42 GND Ground
17 NC NO CONNECTION 43 Rx5n V-by-One HS Data Lane 5
18 NC NO CONNECTION 44 Rx5p V-by-One HS Data Lane 5
19 NC NO CONNECTION 45 GND Ground
20 NC NO CONNECTION 46 Rx6n V-by-One HS Data Lane 6
21 Bit SEL ‘H’ = 10bit(D) , ‘L’ = 8bit 47 Rx6p V-by-One HS Data Lane 6
22 LOCAL_ON H’ = Enable , ‘L’ or NC = Disable 48 GND Ground
‘H’ : AGP
23 RBF 49 Rx7n V-by-One HS Data Lane 7
‘L’ : NSB (No signal Black)
24 GND Ground 50 Rx7p V-by-One HS Data Lane 7
25 HTPDN Hot plug detect 51 GND Ground
26 LOCKN Lock detect - - -

Note
1. All GND (ground) pins should be connected together to the LCD module’s metal frame.
2. All Input levels of V-by-One signals are based on the V-by-One-HS Standard Version 1.4
3. #9 & #16~#20 & #22 NC(No Connection) : These pins are used only for LGD (Do not connect)
4. Specific pin No. #23 is used for “No signal detection” of system signal interface.
It should be GND for NSB (No Signal Black) while the system interface signal is not.
If this pin is “H”, LCD Module displays AGP (Auto Generation Pattern).

Ver. 1.0 8 / 33
 LD490EQE

Product Specification

3-2-2. Backlight Module

[ CN201 ] [ CN202 ]
1) LED Array assy Connector (Plug) 1) LED Array assy Connector (Plug)
: HS100-L08N-N62 (black color, manufactured by UJU) : HS100-L08N-N62-A (natural color, manufactured by
UJU)

R_CNT L_CNT
Pin No
(8pin) (8pin)

Pic.

색상 Black White
1 R1 Cathode Anode_L
2 R2 Cathode NC
3 R3 Cathode NC
4 NC NC
5 NC NC
6 NC L3 Cathode
7 NC L2 Cathode
8 Anode_R L1 Cathode

◆ Rear view of LCM

Ver. 1.0 9 / 33
 LD490EQE

Product Specification

3-3. Signal Timing Specifications

Table 6 shows the signal timing required at the input of the Vx1 transmitter. All of the interface signal timings
should be satisfied with the following specification for normal operation.

Table 6. TIMING TABLE (DE Only Mode)

ITEM Symbol Min Typ Max Unit Note

Display
Period tHV 480 480 480 tCLK 3840/8

Horizontal Blank tHB 60 70 120 tCLK 1

Total tHP 540 550 600 tCLK

Display
Period tVV 2160 2160 2160 Lines

Vertical Blank tVB 40 90 600 Lines 1

Total tVP 2200 2250 2760 Lines

ITEM Symbol Min Typ Max Unit Note

DCLK fCLK 67.00 74.25 78.00 MHz 594/8

Frequency Horizontal fH 121.8 135 140 KHz 2

Vertical fV 47 60 63 Hz 2

notes: 1. The input of HSYNC & VSYNC signal does not have an effect on normal operation (DE Only Mode).
If you use spread spectrum of EMI, add some additional clock to minimum value for clock margin.

2. The performance of the electro-optical characteristics may be influenced by variance of the vertical
refresh rate and the horizontal frequency

3. Spread Spectrum Rate (SSR) is limited to ±0.5% center spread at 30KHz

※ Timing should be set based on clock frequency.

Ver. 1.0 10 / 33
 LD490EQE

Product Specification

3-4. V by One input signal Characteristics

3-4-1. V by One Input Signal Timing Diagram

1UI = 1/(Serial data rate)

ㆍ ㆍ B C

Y
ㆍ
A
ㆍ D Y=0mV

ㆍ ㆍ F E
X

X=0 UI X=1 UI

Table7. Eye Mask Specification

X[UI] Note Y[mV] Note

A 0.25 (max) 2 0 -

B 0.3 (max) 2 50 3

C 0.7(min) 3 50 3

D 0.75(min) 3 0 -

E 0.7(min) 3 l -50 l 3

F 0.3(max) 2 l -50 l 3

notes 1. All Input levels of V by One signals are based on the V by One HS Standard Ver. 1.4
2. This is allowable maximum value.
3. This is allowable minimum value.
4. The eye diagram is measured by the oscilloscope and receiver CDR characteristic must be
emulated.
- PLL bandwidth : 15 Mhz
- Damping Factor : 1.5
Ver. 1.0 11 / 33
 LD490EQE

Product Specification

3-4-2. V by One Input Signal Characteristics

Vdiff =0
Lane0

tRISK_INTER
Lane1 Vdiff =0

<Inter-pair Skew between two Lanes>

1H
T-CON
Max 1 DE
V By One Rx IP
Hblank
Rx1 Vblank Rx
DE

Vblank
Rx2
DE 8 Lane

<Inter-pair Skew between two sub Blocks> <TCON – VbyOne Brief Diagram >

Description Symbol Min Max Unit notes

Allowable inter-pair skew between lanes tRISK_INTER - 5 UI 1,2

Notes 1.1UI = 1/serial data rate

2. it is the time difference of the differential voltage between any two lanes in one sub block.

Ver. 1.0 12 / 33
 LD490EQE

Product Specification

3-5. Color Data Reference

The brightness of each primary color (red, green, blue) is based on the 10bit or 8bit gray scale data input for the color.
The higher binary input, the brighter the color. Table 5 provides a reference for color versus data input.

Table 8. COLOR DATA REFERENCE

Packer input &
30bpp RGB (10bit) 24bpp RGB (8bit)
Unpacker output
D[0] R[2] R[0]

D[1] R[3] R[1]

D[2] R[4] R[2]

D[3] R[5] R[3]

Byte0
D[4] R[6] R[4]

D[5] R[7] R[5]

D[6] R[8] R[6]

D[7] R[9] R[7]

D[8] G[2] G[0]

D[9] G[3] G[1]

D[10] G[4] G[2]

D[11] G[5] G[3]

Byte1
D[12] G[6] G[4]

D[13] G[7] G[5]

D[14] G[8] G[6]

D[15] G[9] G[7]

D[16] B[2] B[0]

D[17] B[3] B[1]

D[18] B[4] B[2]

D[19] B[5] B[3]

Byte2
D[20] B[6] B[4]

D[21] B[7] B[5]

D[22] B[8] B[6]

D[23] B[9] B[7]

D[24] Don’t care

D[25] Don’t care

D[26] B[0]

D[27] B[1]
Byte3
D[28] G[0]

D[29] G[1]

D[30] R[0]

D[31] R[1]

Ver. 1.0 13 / 33
 LD490EQE

Product Specification

3-6. Power Sequence

3-6-1. LCD Driving circuit

90% 90%
Power Supply For LCD
VLCD 10% 10% 10%
0V
T7
T1
T2 T5

Interface Signal (Tx_clock) 0V Vx1 Data

100% T3 T4
T6
User Control Signal
(DATA FORMAT, BIT_SEL, L-DIM EN,
LOCKN , HTPDN)
Power for LED LED ON

Table 9. POWER SEQUENCE

Value
Parameter Unit Notes
Min Typ Max
T1 0.5 - 20 ms 1
T2 0 - - ms 2
T3 400 - - ms 3
T4 100 - - ms 3
T5 3.0 - - s 4
T6 0 - T2 ms 5
T7 0 - - ms 6

Note : 1. Even though T1 is over the specified value, there is no problem if I2T spec of fuse is satisfied.
2. If T2 is satisfied with specification after removing V by One Cable, there is no problem.
3. The T3 / T4 is recommended value, the case when failed to meet a minimum specification,
abnormal display would be shown. There is no reliability problem.
4. T5 should be measured after the Module has been fully discharged between power off and on period.
5. If the on time of signals (Interface signal and user control signals) precedes the on time of Power (VLCD),
it will be happened abnormal display. When T6 is NC status, T6 doesn’t need to be measured.
6. It is recommendation specification that T7 has to be 0ms as a minimum value.
※ Please avoid floating state of interface signal at invalid period.
※ When the power supply for LCD (VLCD) is off, be sure to pull down the valid and invalid data to 0V.

Ver. 1.0 14 / 33
 LD490EQE

Product Specification
4. Optical Specification
Optical characteristics are determined after the unit has been ‘ON’ and stable in a dark environment at 25±2°C.
The values are specified at distance 50cm from the LCD surface at a viewing angle of  and  equal to 0 °.
FIG. 1 shows additional information concerning the measurement equipment and method.
LCD Module Pritchard 880 or
Optical Stage(x,y)
equivalent

50cm
FIG. 1 Optical Characteristic Measurement Equipment and Method

Table 10. OPTICAL CHARACTERISTICS Ta= 25±2°C, V =12.0V, fV=120Hz, Dclk=74.25MHz, EXTVBR-B =100%
LCD

Value
Parameter Symbol Unit Note
Min Typ Max
Contrast Ratio CR 800 1100 - 1
Surface Luminance, white LWH 2D 400 500 - cd/m2 2
Luminance Variation  WHITE 9P 65 - - % 3
Gray to Gray G to G 8 12 ms
Response Time 4
Uniformity  G To G - - 1

Rx 0.644
RED
Ry 0.335
Gx 0.320
GREEN
Color Coordinates Gy Typ 0.598 Typ
[CIE1931] -0.03 +0.03
Bx 0.153
BLUE
By 0.052
Wx 0.279
WHITE
Wy 0.292
Color Temperature 10,000 K
Color Gamut 68 %
right(=0°) r (x axis) 89 - -
Viewing 2D left (=180°) l (x axis) 89 - -
degree 5
Angle (CR>10) up (=90°) u (y axis) 89 - -
down (=270°) d (y axis) 89 - -
Gray Scale - - - 6

Ver. 1.0 15 / 33
 LD490EQE

Product Specification
notes :1. Contrast Ratio(CR) is defined mathematically as :

Surface Luminance with all white pixels

Contrast Ratio =
Surface Luminance with all black pixels
It is measured at center 1-point.

2. Optical Characteristics is determined after the unit has been ‘ON’ and 1 Hour after lighting the
backlight in a dark environment at 25±2°C. Surface luminance is the luminance value at center
1-point across the LCD surface 50cm from the surface with all pixels displaying white.
For more information see the FIG. 2

3. The variation in surface luminance ,  WHITE is defined as :

 WHITE(9P) = Minimum (Lon1,Lon2~ Lon8, Lon9) / Maximum (Lon1,Lon2~ Lon8, Lon9)*100
Where Lon1 to Lon9 are the luminance with all pixels displaying white at 9 locations.
For more information, see the FIG. 2.
4. Response time is the time required for the display to transit from G(N) to G(M) (Rise Time, Tr R)
and from G(M) to G(N) (Decay Time, TrD). For additional information see the FIG. 3. (N<M)
※ G to G Spec stands for average value of all measured points.
Photo Detector : RD-80S / Field : 2˚
5. Viewing angle is the angle at which the contrast ratio is greater than 10. The angles are
determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which
is normal to the LCD module surface. For more information, see the FIG. 5.
6. Gray scale specification
Gamma Value is approximately 2.2. For more information, see the Table 12.

Table 12. GRAY SCALE SPECIFICATION

Gray Level Luminance [%] (Typ)
L0 0.083
L63 0.27
L127 1.04
L191 2.49
L255 4.68
L319 7.66
L383 11.5
L447 16.1
L511 21.6
L575 28.1
L639 35.4
L703 43.7
L767 53.0
L831 63.2
L895 74.5
L959 86.7
L1023 100

Ver. 1.0 16 / 33
16 /36
 LD490EQE

Product Specification

Measuring point for surface luminance & measuring point for luminance variation.

H
A H/2
B

② ③ ④

V/2
⑤ ① ⑥
V

A : H / 9 mm
B : V / 9 mm
⑦ ⑧ ⑨ @ H,V : Active Area

FIG. 2 9 Points for Luminance Measure

T rR T rD
100
90

Optical
Response

10
Gray(N) Gray(M) Gray(N)
0
N,M = Black~White, N<M

FIG. 3 Response Time

Ver. 1.0 17 / 33
 LD490EQE

Product Specification

Dimension of viewing angle range

Normal
E Y
 = 90, Up

 = 180, Left


 = 0, Right

 = 270, Down

FIG. 4 Viewing Angle

Ver. 1.0 18 / 33
 LD490EQE

Product Specification

5. Mechanical Characteristics

Table 9 provides general mechanical characteristics.

Table 13. MECHANICAL CHARACTERISTICS

Item Value

Horizontal 1097.2 mm

Outline Dimension Vertical 630.0 mm

Depth 12.0 mm

Horizontal 1078.4mm
Bezel Area
Vertical 608.6mm

Horizontal 1073.80 mm
Active Display Area
Vertical 604.00 mm

Weight 11.2Kg (Typ), 12.4Kg(Max)

Material EGI, PCM

Case Top
Case Top Color Black

Note : Please refer to a mechanic drawing in terms of tolerance at the next page.

Ver. 1.0 19 / 33
 LD490EQE

Product Specification

[ FRONT VIEW ]

SET : TOP

1097.2 (OUTLINE DIM.)

548.6

13.3

1078.4 (BEZEL OPEN)

539.2

313.2
1073.80 (ACTIVE AREA)

536.90

304.3
302.0

604.0 (ACTIVE AREA)

630.0 (OUTLINE DIM.)

608.6 (BEZEL OPEN)
A

22.6

28.9

A 2.6+0.5
-0.5

MAX 1.3

(0.5)

SET : DOWN

NOTES

1. UNSPECIFIED TOLERANCE IS ` 1.0mm.

2. MAX TORQUE : REFER TO TABLE.
3. MAX DEPTH (SCREW) : REFER TO TABLE.
4. THE SAME FEATURE MEANS THE SAME DIMENSION.
5. TILT AND PARTIAL DISPOSITION TOLERANCE OF DISPLAY AREA IS AS FOLLOWING
(1) X-DIRECTION : IA-BI a 2.0
(2) Y-DIRECTION : IC-DIa 2.0

SECTION A-A
SCALE 4/1
C

B
A

Date Version
ACTIVE AREA

BEZEL OPEN 2018.06.19 0.0

D

Ver. 1.0 20 / 33
 515.6 515.6

471.5 389.0

328.0 369.5 LD490EQE

262.5 262.5 X

184.5 Product Specification

204.5

150.0 150.0

110.0 110.0

[ REAR VIEW ]
SET : TOP
515.6 20.0 515.6

6.8
a a 471.5 389.0 a a
328.0 369.5

262.5 262.5 X

184.5
14.0 204.5

6.4 150.0 150.0

6.8
i 110.0 110.0
i

4.1
f
26.3

(a) (a) f

2.1
20.0 h
8.5 10.4 6.8
d a

6.8
a a a a

f
d d 14.0 f

24.4

104.4
f g
8.0

3.2
6.4 f

72.4
6.4
6.8

b i b
i
4.1

f
26.3

(a) (a) f
2.1

292.2
h g

59.6
8.5 10.4 6.8
d
177.5

131.6
144.4
d d f

122.4

166.1
24.4
g

104.4
f g
8.0

3.2
f
94.4

8.0

72.4
6.5
i

6.4
b d d i b
d

227.1
7.4

256.1
2.1
6.3

(a) (a) 6.5

g
j

59.6
d
e f
217.9

13.0
122.5
123.1
131.6

131.6
k 11.4

166.1
g
13.0 j (b) k
(b)
8.0

f
6.5
d d i i
214.8

227.1
11.4 7.4 j

256.1
259.8

2.1

270.3

272.0
6.3

276.8
(a)

10.0
2.0

(e) d
(a) j 6.5 (e)
8.0

e j
28.2

(d) f
k (c) k (d)
217.9

13.0 (c) 10.0 10.0

k 11.4
8.0

13.0 j (b) k
(b)
11.4 j
m m

10.0
2.0

(e) (e)
l l m 7.4 m l l c
8.0

j
28.2

c (d) k (c) k
10.0

(c) 10.0 10.0 (d)

8.0

m m c
41.0

l l m 7.4 m l l
c 78.0 78.0
10.0

135.0 78.0 135.0

78.0

135.0 135.0
178.5 178.5
178.5 178.5
216.5 216.5

256.5 256.5

291.0 291.0
291.0 291.0
293.0 293.0
X
293.0 357.5 293.0 357.5
X
450.0 450.0
357.5 357.5
480.0 480.0
450.0 450.0
525.6 525.6

480.0 480.0

525.6
SET : DOWN NOTES
a M3.0
Tap
Max. Depth Max.
(mm)
5.1
Torque UDM Height
525.6
(kgh.cm) (Reference,mm)
7 (4.0)
UDM NOTES
BACK COVER
0.0
+0.4
-0.4 b M3.0 6.1 7 (5.0) BACK COVER
c M3.0 3.7 7 (3.0) BACK COVER
d M3.0 4.3 7 (4.5) PSU
Max.4.3
Depth Max. Torque UDM Height
NOTES e TapM4.0 7 (4.5) PSU UDM NOTES
f M3.0
(mm)
9.6
(kgh.cm)
7
(Reference,mm)
(9.8) MAIN
a g M3.0M3.0 5.1
3.9 7 7 (4.1) (4.0) BRK BACK COVER
0.0 +0.4
-0.4 b h M3.0M3.0 3.3
6.1 7 7 (3.0) BACK COVERBACK COVER
(5.0)
i M3.0 10.3 7 (3.0) VESA
c j
M3.0M3.0 3.7
12.4 7
7 (5.1)
(3.0)
STAND(1POLE)
BACK COVER
SECTION X-X d k M3.0M4.0 4.3
6.5 10 7 (9.4) (4.5)
STAND PEMNUT PSU
e l M4.0M3.0 5.6
4.3 7 7 (2.0) (4.5) DECO1 PSU
m M3.0 6.6 7 (3.0) DECO2
f M3.0 9.6 7 (9.8) MAIN
g M3.0 3.9 7 (4.1) BRK
h M3.0 3.3 7 (3.0) BACK COVER
i M3.0 10.3 7 (3.0) VESA
j M3.0 12.4 7 (5.1) STAND(1POLE)
SECTION X-X k M4.0 6.5 10 (9.4) STAND PEMNUT
l M3.0 5.6 7 (2.0) DECO1
m M3.0 6.6 7 (3.0) DECO2

Ver. 1.0 21 / 33
 LD490EQE

Product Specification

6. Reliability

Table 10. ENVIRONMENT TEST CONDITION

No. Test Item Condition

1 High temperature storage test Ta= 60°C 90% 240h

2 Low temperature storage test Ta= -20°C 240h

3 High temperature operation test Ta= 50°C 50%RH 500h

4 Low temperature operation test Ta= 0°C 500h

5 Humidity condition Operation Ta= 40 °C ,90%RH

Altitude operating 0 - 16,400 ft

6
storage / shipment 0 - 40,000 ft

Wave form : Random

Vibration Level 0.5Grms
Vibration test
7 Bandwidth : 10 ~ 300Hz
(non-operating)
Duration : X, Y, Z
Each direction Per 10min

Shock Level : 30 Grms

Shock test Waveform : Half Sine Wave, 11ms
8
(non-operating) Duration : X, Y, Z
One time each direction

9 Panel Push Test (Module Condition) Max 6kgf

notes : 1. Before and after Reliability test, LCM should be operated with normal function.

Ver. 1.0 22 / 33
 LD490EQE

Product Specification

7. International Standards

7-1. Safety
a) UL 60065, Underwriters Laboratories Inc.
Audio, Video and Similar Electronic Apparatus - Safety Requirements.
b) CAN/CSA-C22.2 No. 60065-03, Canadian Standards Association.
Audio, Video and Similar Electronic Apparatus - Safety Requirements.
c) EN 60065, European Committee for Electrotechnical Standardization (CENELEC).
Audio, Video and Similar Electronic Apparatus - Safety Requirements.
d) IEC 60065, The International Electrotechnical Commission (IEC).
Audio, Video and Similar Electronic Apparatus - Safety Requirements.

7-2. Environment
a) RoHS, Directive 2011/65/EU of the European Parliament and of the council of 8 June 2011

Ver. 1.0 23 / 33
 LD490EQE

Product Specification

8. Packing

8-1. Information of LCM Label

a) Lot Mark

A B C D E F G H I J K L M

A,B,C : SIZE(INCH) D : YEAR

E : MONTH F ~ M : SERIAL NO.

notes
1. YEAR
Year 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020

Mark A B C D E F G H J K

2. MONTH

Month Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec

Mark 1 2 3 4 5 6 7 8 9 A B C

b) Location of Lot Mark

Serial NO. is printed on the label. The label is attached to the backside of the LCD module.
This is subject to change without prior notice.

8-2. Packing Form

a) Package quantity in one Pallet : 22 pcs

b) Pallet Size : 1300 mm(W) X 1140 mm(D) X 841 mm(H)

Ver. 1.0 24 / 33
 LD490EQE

Product Specification

9. Precautions
Please pay attention to the followings when you use this TFT LCD module.
9-1. Mounting Precautions
(1) You must mount a module using specified mounting holes (Details refer to the drawings).
(2) You should consider the mounting structure so that uneven force (ex. Twisted stress, Concentrated stress)
is not applied to the module. And the case on which a module is mounted should have sufficient strength
so that external force is not transmitted directly to the module.
(3) Please attach the surface transparent protective plate to the surface in order to protect the polarizer.
Transparent protective plate should have sufficient strength in order to the resist external force.
(4) You should adopt radiation structure to satisfy the temperature specification.
(5) Acetic acid type and chlorine type materials for the cover case are not desirable because the former
generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit break
by electro-chemical reaction.
(6) Do not touch, push or rub the exposed polarizers with glass, tweezers or anything harder than HB
pencil lead. And please do not rub with dust clothes with chemical treatment.
Do not touch the surface of polarizer for bare hand or greasy cloth.(Some cosmetics are detrimental
to the polarizer.)
(7) When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like
chamois soaks with petroleum benzine. Normal-hexane is recommended for cleaning the adhesives
used to attach front / rear polarizers. Do not use acetone, toluene and alcohol because they cause
chemical damage to the polarizer
(8) Wipe off saliva or water drops as soon as possible. Their long time contact with polarizer causes
deformations and color fading.
(9) Do not open the case because inside circuits do not have sufficient strength.

9-2. Operating Precautions

(1) Response time depends on the temperature.(In lower temperature, it becomes longer.)
(2) Brightness depends on the temperature. (In lower temperature, it becomes lower.)
And in lower temperature, response time(required time that brightness is stable after turned on)
becomes longer
(3) Be careful for condensation at sudden temperature change.Condensation makes damage to polarizer or
electrical contacted parts. And after fading condensation, smear or spot will occur.
(4) When fixed patterns are displayed for a long time, remnant image is likely to occur.
(5) Module has high frequency circuits. Sufficient suppression to the electromagnetic interference shall be
done by system manufacturers. Grounding and shielding methods may be important to minimized the
interference.
(6) Please do not give any mechanical and/or acoustical impact to LCM. Otherwise, LCM can’t be operated
its full characteristics perfectly.
(7) A screw which is fastened up the steels should be a machine screw.
(if not, it can causes conductive particles and deal LCM a fatal blow)
(8) Please do not set LCD on its edge.
(9) The conductive material and signal cables are kept away from LED driver inductor to prevent abnormal
display, sound noise and temperature rising.

Ver. 1.0 25 / 33
 LD490EQE

Product Specification

9-3. Electrostatic Discharge Control

Since a module is composed of electronic circuits, it is not strong to electrostatic discharge. Make certain that
treatment persons are connected to ground through wrist band etc. And don’t touch interface pin directly.

9-4. Precautions for Strong Light Exposure

Strong light exposure causes degradation of polarizer and color filter.

9-5. Storage
When storing modules as spares for a long time, the following precautions are necessary.

(1) Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep the temperature
between 5°C and 35°C at normal humidity.
(2) The polarizer surface should not come in contact with any other object.
It is recommended that they be stored in the container in which they were shipped.
(3) Storage condition is guaranteed under packing conditions.
(4) The phase transition of Liquid Crystal in the condition of the low or high storage temperature will be
recovered when the LCD module returns to the normal condition.

9-6. Handling Precautions for Protection Film

(1) The protection film is attached to the bezel with a small masking tape.
When the protection film is peeled off, static electricity is generated between the film and polarizer.
This should be peeled off slowly and carefully by people who are electrically grounded and with well ion-
blown equipment or in such a condition, etc.
(2) When the module with protection film attached is stored for a long time, sometimes there remains a very
small amount of glue still on the bezel after the protection film is peeled off.
(3) You can remove the glue easily. When the glue remains on the bezel surface or its vestige is recognized,
please wipe them off with absorbent cotton waste or other soft material like chamois soaked with normal-
hexane.

Ver. 1.0 26 / 33
 LD490EQE

Product Specification

9-7. Appropriate Condition for Commercial Display

- Generally large-sized LCD modules are designed for consumer applications (TV).
Accordingly, a long-term display like in Commercial Display application, can cause uneven display including
image sticking. To optimize module's lifetime and function, several operating usages are required.
1. Normal operating condition
- Temperature: 0 ~ 40℃
- Operating Ambient Humidity : 10 ~ 90 %
- Display pattern: dynamic pattern (Real display)
Note) Long-term static display can cause image sticking.
2. Operating usages under abnormal condition
a. Ambient condition
- Well-ventilated place is recommended to set up Commercial Display system.
b. Power and screen save
- Periodical power-off or screen save is needed after long-term display.

3. Operating usages to protect against image sticking due to long-term static display
a. Suitable operating time: under 24 hours a day.
(* The moving picture can be allowed for 24 hours a day)
b. Static information display recommended to use with moving image.
- Cycling display between 5 minutes' information(static) display and 10 seconds' moving image.
c. Background and character (image) color change
- Use different colors for background and character, respectively.
- Change colors themselves periodically.
d. Avoid combination of background and character with large different luminance.
1) Abnormal condition just means conditions except normal condition.
2) Black image or moving image is strongly recommended as a screen save.

4. Lifetime in this spec. is guaranteed only when Commercial Display is used according to operating usages.
5. Module should be turned counter-clockwise based on front view when used in portrait mode.

Ver. 1.0 27 / 33
 LD490EQE

Product Specification
# APPENDIX- I

■ Pallet Ass’y

1 ①
2 3
⑥
⑤
②

③
④

4 ⑦
5 6
⑧

NO. DESCRIPTION MATERIAL

① LCD Module 49INCH

② PROTECT FILM PE

③ AL BAG AL

④ PALLET PLYWOOD 1300×1140×134.5mm

⑤ PACKING,BOTTOM PAPER

⑥ PACKING,SIDE RIB EPS

⑦ PACKING, TOP PAPER

⑧ BAND,CLIP STEEL , PP

⑨ LABEL YUPO 80G 100X70

Ver. 1.0 28 / 33
 LD490EQE

Product Specification

# APPENDIX- II-1

■ LCM Label

Model LD490EQE
(FK)(A1) SH

Serial No.
LIGHT GUIDE : >PMMA<
UL, TUV Mark

LGD Logo MADE IN CHINA Origin

■ Production site
- LG Display (Guangzhou, Heesung) CO., LTD
notes 1.The origin of LCM Label will be changed according to the production site.

Ver. 1.0 29 / 33
 LD490EQE

Product Specification

# APPENDIX- II-2

■ Pallet Label

LD490EQE FKA1
EAJ63628502
22 PCS 001/01-01
MADE IN CHINA RoHS Verified

XXXXXXXXXXXXX XXX

Ver. 1.0 30 / 33
 LD490EQE

Product Specification

# APPENDIX- III
■ Required signal assignment for Flat Link (Thine : THCV215) Transmitter

TX’s Inner Structure

Packer Scrambler 8/10b Encoder Serializer

8 H H j j
D[31:24] G G h h
8 F F g g
8 Tx_n
D[23:16] PD[7:0] PD[7:0] E E f f
D D i i
8 Tx_p
C C e e
D[15:8] d d
B B
8 A A c c
D[7:0] b b
D/K D/K a a

Timing diagram of the Serializer

First Last
a b c d e i f g h g

time

Timing
THCV215 FI-RE51S-HF
Controller
or Compatible
100nF
8
Tx_n Rx_n
D[31:24]

8 100nF
D[23:16] Tx_p Rx_p
Tx’s
8 Inner
D[15:8] Strucure HTPDN HTPDN
8
D[7:0]
LOCKN LOCKN

VCC

notes: 1. The LCD module uses a 100 nF capacitor on positive and negative lines of each receiver input.
2. Refer to Vx1 Transmitter Data Sheet for detail descriptions. (THCV215 or Compatible)
3. About Module connector pin configuration, Please refer to the Page 8~9.

Ver. 1.0 31 / 33
 LD490EQE

Product Specification

# APPENDIX- IV
■ Option Pin Circuit Block Diagram

1) Circuit Block Diagram of Bit Selection pin

Bit Select Pin : Pin 21

VCC

42kΩ
1KΩ
Bit Select
Bit Select
(Pin 21)

ASIC
(TCON)

System Side LCM Side

2) Circuit Block Diagram of AGP Selection pin

AGP(auto Generation Pattern ) or NSB (no signal black) : Pin 23

FI-RE51S-HF
Vcc : 3.3V

10kΩ
pin 1kΩ
#23

R1 ≤ 1kΩ 43kΩ
(0Ω recommand)

ASIC
(TCON)

System Side LCM Side

Ver. 1.0 32 / 33
 LD490EQE

Product Specification

# APPENDIX- V
■ LED Array Electrical Spec

Item Condition Min Typ Max Uint Remark

Forward
130.3 135.3 140.3 V Ta=25℃
voltage(Vf)
If=90mA
△Vf*¹ - - 1.7 V

Ver. 1.0 33 / 33
 LD490EQE

Product Specification

# APPENDIX- VI

■ input mode of pixel data

Mode 1 : Non-Division Mode 2 : 2 Division

Lane 1st Data 2nd Data Data# Lane 1st Data 2nd Data Data#

Lane0 1 9 3833 Lane0 1 5 1917

Lane1 2 10 3834 Lane1 2 6 1918

Lane2 3 11 3835 Lane2 3 7 1919

Lane3 4 12 3836 Lane3 4 8 1920

Lane4 5 13 3837 Lane4 1921 1925 3837

Lane5 6 14 3838 Lane5 1922 1926 3838

Lane6 7 15 3839 Lane6 1923 1927 3839

Lane7 8 16 3840 Lane7 1924 1928 3840

Ver. 1.0 34 / 33