PRODUCT DATA SHEET
Sika® Injection-101 h
FLEXIBLE WATER REACTIVE PUR-INJECTION FOAM FOR TEMPORARY WATER
STOPPING
DESCRIPTION ▪ To achieve permanent watertight crack sealing, Sika®
Injection-201,Sika® Injection-202 (IN) should be in-
Sika® Injection-101 h is a low viscous, fast foaming and jected subsequently.
solvent-free water-reactive
polyurethane injection, which cures to form a dense CHARACTERISTICS / ADVANTAGES
flexible foam with a fine
cellular structure. ▪ No reaction takes places unless it comes with direct
contact with water.
USES ▪ Free foaming when in contact with water is upto 20
times,in controlled setings the foaming has been ob-
▪ Sika® Injection-101 h is used for the temporary wa- served even upto 40 times
ter stopping of high water intrusions in cracks, joints
and cavities in concrete, brickwork and natural stone-
work.
PRODUCT INFORMATION
Chemical Base Solvent free polyurethane two component injection system
Packaging Pack A : 10 kg
Pack B : 0.9 kg
Colour Pack A : Brown
Pack B : Clear
Shelf Life 12 months if stored in original unopened conditions
Storage Conditions The material must be stored in a Dry Place within the temperature range of
+10 °C to +40 °C
Density Pack A : 1130 ± 30 kg/m³
Pack B : 900 ± 30 kg/m³
Viscosity 200 - 700 cps , mixed viscosity of mixture at 30°C
TECHNICAL INFORMATION
Expansion Expansion Starts ~ 15 sec after contact with water
Expansion Ends ~ 50 sec after contact with water
* The given data are laboratory parameters and may deviate depending on
the object and conditions on site.
Product Data Sheet
Sika® Injection-101 h
July 2019, Version 01.01
020707010010000008
1/2
APPLICATION INFORMATION
Mixing Ratio Pack A : Pack B (By Volume)
9±1:1
Ambient Air Temperature +5 ºC min / +35 ºC max
Substrate Temperature +5 ºC min / +35 ºC max
Pot Life ~ 3 hours
APPLICATION INSTRUCTIONS LOCAL RESTRICTIONS
MIXING Please note that as a result of specific local regula-
tions the declared data for this product may vary from
Empty parts A and B into a mixing vessel and mix country to country. Please consult the local Product
slowly and thoroughly for at least 3 min (max. 250 Data Sheet for the exact product data.
rpm) until homogeneous, thereby observing the safety
precautions. The containers are supplied according to ECOLOGY, HEALTH AND SAFETY
the required mixing ratio of 9 ± 1 : 1 parts by volume.
Partial quantities can be measured out in separate ves- For information and advice on the safe handling, stor-
sels. age and disposal of chemical products, users shall refer
After mixing, pour the material into the pump’s to the most recent Material Safety Data Sheet contain-
feed container, stir briefly and apply within the pot ing physical, ecological, toxicological and other safety-
life. related data.
After mixing, pour the material into the pump’s feed
container, stir briefly and use within the pot life. LEGAL NOTES
APPLICATION METHOD / TOOLS The information, and, in particular, the recommenda-
Use injection pumps suitable for single part injection tions relating to the application and end-use of Sika
products products, are given in good faith based on Sika's cur-
Please note that the lid of the material is packed with rent knowledge and experience of the products when
pressure hence while opening the lid care must be properly stored, handled and applied under normal
taken and opened with care. conditions in accordance with Sika's recommenda-
Please refer to the Material Safety Data Sheet in case tions. In practice, the differences in materials, sub-
of any spillage of material on skin. strates and actual site conditions are such that no war-
ranty in respect of merchantability or of fitness for a
CLEANING OF TOOLS particular purpose, nor any liability arising out of any
legal relationship whatsoever, can be inferred either
Clean all tools and application equipment with a good from this information, or from any written recom-
quality thinner. mendations, or from any other advice offered. The
user of the product must test the product’s suitability
BASIS OF PRODUCT DATA for the intended application and purpose. Sika re-
serves the right to change the properties of its
All technical data stated in this Product Data Sheet are products. The proprietary rights of third parties must
based on laboratory tests. Actual measured data may be observed. All orders are accepted subject to our
vary due to circumstances beyond our control. current terms of sale and delivery. Users must always
refer to the most recent issue of the local Product Data
Sheet for the product concerned, copies of which will
be supplied on request.
Sika India Pvt. Ltd.
620, Diamond Harbour Road
Commercial Complex II
Kolkata - 700 034
Tel : +91 33 24472448
Fax : +91 33 23978688
Mail : info.india@in.sika.com
SikaInjection-101h-en-IN-(07-2019)-1-1.pdf
Product Data Sheet
Sika® Injection-101 h
July 2019, Version 01.01
020707010010000008
2/2
