FVR 950 HD

FVD 950 HD

AT A GLANCE
GVM 16,500 kg
GCM 32,000 kg
Engine Type Isuzu SiTEC 275
Displacement 9.8 L
Power 206 kW @ 2,000 rpm
Torque 1,030 Nm @ 1,400 rpm
Wheelbase 5,550 - 6,250 mm
FVR 950 HD Long
FVD 950 HD Long / Custom Long / Auto

DRIVELINE & CHASSIS SPECIFICATIONS

ENGINE: SITEC 275 (ISUZU 6SD1-TC) SiTEC 275
Type: 6 cylinder, 4 stroke, SOHC, direct injection diesel. Maximum Power : 206 kW @ 2,000 RPM
Maximum Torque : 1,030 Nm @ 1,400 RPM
Variable Geometry Turbocharger (VGT) and air-to-air
intercooler. Adjustable roller type rocker arms.
Displacement: 9,839 cc
Compression Ratio: 16.0:1
Bore x Stroke: 120 x 145 mm
Max power (DIN NET): 206 kW @ 2,000 RPM
e
Max torque (DIN NET): 1030 Nm @ 1,400 RPM rqu
To
Emissions Standard: ADR 80/00 (Euro-III)

er
• Plate type oil cooler. 28.4 L oil capacity. Separate full flow

w
Po
main filter and bypass oil filter.

Torque (Nm)
Power (kW)
COOLING SYSTEM
• 6 blade, 600 mm diameter cooling fan with thermostatically
controlled viscous clutch. Dual drive belts. Radiator frontal
area: 5,088 cm2. 29 L coolant capacity.
AIR INTAKE SYSTEM
• Vertical air intake mounted on back of cab. Two stage
Donaldson air cleaner with 280 x 380 mm main element
and 160 x 350 mm secondary element.
• 610 x 540 mm air-to-air intercooler.
FUEL SYSTEM
• Denso common rail fuel injection. Separate fuel filter and
water separator.
• 400 L aluminium tank (manual models).
180 L steel tank (automatic models). Engine Speed (RPM)
ISUZU SiTEC 275 (6SD1-TC) ENGINE PERFORMANCE CHART
CLUTCH
• Air assisted hydraulic control.
Single plate 381 mm diameter. SUSPENSION
Asbestos free cerametallic lining material. FRONT
Total lining area: 1,363 cm2 • Single stage, alloy steel, taper leaf springs. Fully wrapped
eye with greasable shackles.
TRANSMISSION • Nominal size: 1,600 x 80 mm
EATON FS-8209A BBE 9 Speed manual • Total spring capacity (at ground): 6,670 kg
(Long/Custom Long) • Double acting, hydraulic shock absorbers. Stabiliser bar.
• 9 forward speeds. Direct drive.
REAR FVR 950 HD
• Syncromesh on gears 1-8. Repeat ‘H’ shift pattern.
• Two stage, alloy steel, multi-leaf springs. Fully wrapped eye
• 8.5 L oil capacity. with greasable shackles.
• Two SAE PTO openings on LHS of transmission case. • Nominal size: 1,420 x 100 mm
• Gear ratios (: 1) • Total spring capacity (at ground): 11,300 kg
Low 1st 2nd 3rd 4th 5th 6th 7th 8th Rev • Stabiliser bar.
12.64 8.81 6.55 4.77 3.55 2.48 1.85 1.34 1.00 13.17
REAR FVD 950 HD
ALLISON MD 3060P 6 Speed automatic
(Auto model) • Hendrickson HAS230 airbag.
• Electronically controlled automatic transmission with adaptive • Two rolling lobe air springs.
shift. 6 forward speeds including overdrive. • Total spring capacity (at ground): 10,430 kg
• 27 L oil capacity. • Outboard mounted, double acting shock absorbers.
• SAE PTO openings on LHS & RHS of transmission • Height control valve.
bell housing.
• Gear ratios (: 1)
BRAKES
1st 2nd 3rd 4th 5th 6th Rev • Meritor ‘Q-Plus’ Full air ‘S-cam’ brakes with automatic
3.49 1.86 1.41 1.00 0.75 0.65 5.03 slack adjusters.
• Front drum diameter: 419 mm
AXLES • Rear drum diameter: 419 mm
FRONT: MERITOR FG941 • Swept area: 8,030 cm2
• Reverse Elliot I-beam. 6,600 kg capacity. • Asbestos free lining material.
• Oil bath lubricated front wheel hubs, see through oil • Spring type parking brake acting on rear wheels.
level indicator. • Air controlled exhaust brake.
REAR: MERITOR RS-23-161G • 78.5 L total air reservoir capacity.
• Full floating Banjo type. 10,400 kg capacity. • Air dryer.
• Drive ratio: Manual: 3.909:1, Auto: 5.625:1
• Cross locks available as optional fitment.
 STEERING FVD 950 HD FRONT REAR
• Power assisted recirculating ball steering. Axle Capacity (kg): 6,600 10,400
• 22.4:1 gear ratio. Spring Capacity (kg): 6,670 10,430
• 5.4 turns lock to lock. Tyre Capacity (kg): 7,100 11,600
• 450 wheel cut angle (inside wheel). Legal Limit (kg): 6,000 10,000
Limit (kg): 6,000 10,000
WHEELS AND TYRES Note: Vehicle loading limit is determined by the combination of axle loading
• 8.25 x 22.5 Ten stud ISO standard disc wheels. limit, GVM and GCM limit, and government regulatory requirements. Consult
your Isuzu dealer to select the correct vehicle for your specific application.
• 295/80R22.5 152/148M Michelin XZE2 steer tyres.
Rating: 3,550 kg per tyre. CHASSIS FRAME
• 11R22.5 148/145L Michelin XDE2 drive tyres. • Cold riveted ladder frame with parallel side rails.
Rating: 2,900 kg per tyre (dual configuration). Long Auto
• Frame mounted winch type spare wheel carrier (except • Frame material SAPH440 HT540A
auto). Spare wheel and XZE2 tyre assembly supplied. Side rail (mm): 258 x 85 x 10 254 x 85 x 8
Rear frame width (mm): 850 850
AXLE LOAD SUMMARY • Frame reinforcement section.
FVR 950 HD FRONT REAR • Front and rear tow hooks.
Axle Capacity (kg): 6,600 10,400 ELECTRICAL SYSTEM
Spring Capacity (kg): 6,670 11,300 • 24 Volt electrical system.
Tyre Capacity (kg): 7,100 11,600 • 24 Volt, 60 Amp alternator.
Legal Limit (kg): 6,000 9,000 • 24 Volt, 5.5 kW starter motor.
Limit (kg): 6,000 9,000 • 2 x 75D23R (520CCA) batteries connected in series.

CABIN SPECIFICATIONS AND APPOINTMENTS

CAB EXTERIOR • Electric windows.
• All steel cab, side door impact protection beams. Outer body • Central locking with remote keyless entry.
panels galvanised, corrosion resistant primer treated cab. • Centre facia pullout drinks holder. Lockable centre
• Manual cab tilt to 450. Access to fluid checkpoints without storage compartment. Cigarette lighter.
tilting cab. Lift up front access panel for clutch, windsrceen • Heater/Demister with 4-speed fan and outlets for
washer fluids and cab air filter screen. Four point silicone windscreen, side windows, face and floor.
filled rubber cab mounting. • Standard fully integrated air conditioning.
• Body coloured steel front bumper with step holes • Two speaker Eurovox Radio/CD player with digital anti
and footplate. skip memory.
• 900 opening internally reinforced door. Heavy duty • Remote seek/volume and mute switch located on dash
aluminium non slip entry steps. to right of steering wheel.
• Tinted, laminated windscreen. 2 speed windscreen wiper • Optional 10 stack CD player.
system, variable intermittent wipe mode, triple washer jets.
DRIVER CONTROLS
• Halogen headlamps. Park lamps and roof-mounted
clearance lamps. • Key-operated engine start/stop and steering lock. Electronic
throttle control. Engine idle speed control.
• Combination brake, turn, reverse and marker lamps,
registration plate illumination lamps. Extended wiring • Left side combination stalk: Windscreen wipers, washers,
harness. Reverse alarm. exhaust brake and hazard lights.
• ‘West Coast’ type rear view mirrors. Large flat mirror glass • Right side combination stalk: Turn signals and headlamps.
with additional, independently adjustable convex ‘spot’ • Pushbutton gear selection (automatic model).
mirror on both sides.
• Dual tone air horn. INSTRUMENTATION
• Gauges: Electronically driven speedometer, odometer,
CAB INTERIOR tripmeter, tachometer. Gauges for coolant temperature and
• Isringhausen ISRI 6500/517 air suspension driver’s seat, brake air pressure.
auto weight adjustment to 130 kg. Height, rake and • Warning lamps: Warning bulb check switch. Battery charge,
backrest recline adjustment. Pneumatic lumbar support. brake system, engine malfunction, oil pressure, stop and
Reclining passenger bucket seat. Centre seat with folding tail lamp failure.
seat back (except auto model). • Indicator lamps: Turn signals, parking brake, high beam,
• 3-point, lap sash seatbelts with emergency locking belt exhaust brake engaged.
retractors in all outboard seating positions.
• Centre lap seatbelt (except auto model). CUSTOM CAB MODEL
• ‘A’ pillar entry assist grips. Fluorescent dome interior lamp FEATURES REPLACING OR ADDITIONAL TO
with On/Door/Off switch activated by either door. STANDARD CAB FEATURES
• Full interior panel trim, padded roof lining, vinyl floor mats. • Chrome radiator grille and headlamp surrounds.
Windscreen header storage shelf. DIN sized aperture in • Gold ‘Custom’ badging and emblem. Gold ISUZU badge.
dash for CB. Overhead console fitted with harness for CB.
• Fluorescent interior lamp.
• Tilt/Telescopic adjustable steering column, soft feel urethane
steering wheel. • Woodgrain instrument panel.
• 12 Volt, 100 Watt and 24 Volt, 2 pin accessory sockets • Auto sensor headlight switch.
located in centre console.
FVR 950 HD Long 8FS02-6E0 (MU1)

FVD 950 HD Long / Custom Long / Auto 8FS02-6E1 8FS02-6E4 8FS02-6F1

(MU1) (MU1) (MU1)

PERFORMANCE (Calculated)
FVR 950 HD LONG FVD 950 HD LONG FVD 950 HD AUTO
Max Geared speed: 105* km/h @ 2,100 rpm 105* km/h @ 2,100 rpm 112* km/h @ 2,100 rpm
Gradeability (lowest gear) : 60% at 15,000 kg GVM 56% at 16,000 kg GVM 45% at 16,000 kg GVM
Gradeability (top gear at 100 km/h): 1.6% (2.5 x 3.4 m van body at 15,000 kg GVM) 1.4% (2.5 x 3.4 m van body at 16,000 kg GVM) 1.2% (2.5 x 3.4 m van body at 16,000 kg GVM)
Engine speed (top gear at 100 km/h) : 2,000 rpm 2,000 rpm 1,870 rpm
Performance figures quoted are representative only and based on typical dimensions, body styles and weights. Please consult your Isuzu dealer for an estimation based on your specific application. * Road speed limited to 100 km/h

MODEL RATINGS AND DIMENSIONS

MODELS RATINGS (kg) TARE MASS #(kg) DIMENSIONS (mm) TURN
CIRCLE
GVM* GCM TOTAL FRONT REAR WB OAL FOH ROH CA CE RT ORT CH CW FFH RFH KERB
UNLADEN UNLADEN TO KERB

FVR 950 Long 16,500 32,000 5,400 3,215 2,185 6,250 10,000 1,250 2,500 5,340 8,040 1,840 2,450 2,760 2,440 975 1,060 20.1 m
FVD 950 Long 16,500 32,000 5,265 3,220 2,045 6,250 10,000 1,250 2,500 5,340 8,040 1,840 2,450 2,760 2,440 985 1,010 20.1 m
FVD 950 Auto 16,500 32,000 5,095 3,140 1,955 5,550 9,250 1,250 2,450 4,840 7,290 1,840 2,450 2,760 2,440 985 1,010 18.7 m
*Maximum optional GVM rating. # Estimated mass of cab/chassis with oil, water and fuel tank containing 10 litres of fuel and excluding spare wheel (95 kg) and tools (30 kg).
255

710 CA

CE

RFH
FFH
3425
CH

2025 RT

CW ORT FOH WB ROH

OAL
For further information regarding Cab/Chassis dimensions your Isuzu Dealer can access detailed Body Builders diagrams from the Isuzu Truck Technical Reference CD.

ISUZU NEW TRUCK WARRANTIES

STANDARD TRUCKPOWER WARRANTY* TRUCKPOWER EXTENDED WARRANTY OPTIONS#
NEW VEHICLE 3 years 200,000 km
4 years / 300,000 km 5 years / 350,000 km 6 years / 400,000 km
DRIVETRAIN 3 years 200,000 km
CAB CORROSION 3 years unlimited
* Subject to the conditions outlined in the I-GM New Vehicle Warranty, the Isuzu
Why have Isuzu Trucks been FVR & FVD HD models carry a standard factory warranty which covers the
Australia’s No. 1 choice since 1989? * owner: (i) for the entire vehicle, for the first 36 months or 200,000 km (whichever
comes first). (ii) for the drivetrain, which runs concurrently, for 36 months or
• Widest range of models to suit most applications 200,000 km (whichever comes first). (iii) against cab corrosion, for 36 months and
• Premium componentry and Isuzu diesel engines unlimited kilometres.
#
A TruckPower Extended Warranty as illustrated is available by purchase to
• Network of over 40 specialist Isuzu Dealerships and branches cover the owner against the failure of original components, but excludes some
• Sales, services and parts support components and expendable items such as oil, filters, etc. Please consult with
your Isuzu Dealer for full details obtained from a dedicated brochure available
• Predictable operating costs through Dealer ISIS program
to customers.
• Factory and range of extended warranties available
• High resale values
• Leading reputation for reliability
www.isuzu.com.au * Source Truck Tracker 2003

ISUZU-GENERAL MOTORS AUSTRALIA LTD A.C.N. 006 962 572. PLEASE NOTE: as the policy of I-GM is one of continual product improvement, all specifications and equipment are subject to
change without notice. No I-GM dealer or other person is authorised or permitted to give or make any statement, assertion or undertaking in relation to the quality, performance, characteristics,
descriptions or fitness for any purpose of any I-GM product or in connection with the supply of any I-GM product which is at variance with any written statement, assertion or undertaking on any of these
subjects given or made by I-GM in its published sales literature, and the company accepts no liability for any such unauthorised action. I-GM has franchised dealers in many parts of Australia, for the
sale of service, parts and the provision of service to the owners of I-GM products. Every endeavour is made to ensure that such dealers carry adequate stocks of service parts and are equipped to
provide satisfactory service, but makes no promise, other than that contained in the I-GM new vehicle warranty, that such parts or service facilities will be available or available at any specific location
or at any particular time. A word about this specification sheet. We have tried to make it as comprehensive and factual as possible. However, since the time of printing some of the information you will
find here may have been updated. Also, some of the equipment shown or described through this specification sheet may have been changed and/or is available at extra cost. And the right is reserved
to make changes at any time without notice, in prices, colours, materials, equipment and models. Your I-GM dealer has details and before ordering, you should ask him/her to bring you up to date.
OCTOBER 2004. ARK/IGM 0131