Contents Multimedia Navi Pro .......................

5
Multimedia ................................... 55
Multimedia Navi Pro Introduction .................................... 6
Basic operation ............................ 14
Radio ........................................... 21
External devices .......................... 26
Navigation .................................... 30
Speech recognition ...................... 42
Phone .......................................... 45
Emergency numbers
Index ............................................ 52
For emergency service call the Vauxhall 0800 55 33 88 (Free
Incident Manager Linkline)*

Vauxhall Assistance General Enquiries 0845 7565 565

You will need to Vehicle registration Model and colour of

provide: number your Vauxhall

Contact telephone Details of your precise

number location

* Calls may be chargeable from mobile phones

6 Introduction

Introduction General information Important information on

operation and traffic safety
Notice
This manual describes all options
and features available for the 9 Warning
General information ....................... 6
various Infotainment systems.
Theft-deterrent feature ................... 7 Certain descriptions, including those Drive safely at all times. Only
for display and menu functions, may operate the Infotainment system if
Control elements overview ............ 8
not apply to your vehicle due to the traffic conditions allow a safe
Usage .......................................... 10 usage.
model variant, country
specifications, special equipment or In the interest of safety, it might be
accessories. appropriate to stop the vehicle
before operating the Infotainment
Notice
system (e.g. for entries of
The Infotainment system includes
addresses).
certain third party software. For the
associated notices, licenses and any
other information regarding this 9 Warning
software see
http://www.psa-peugeot- The usage of the navigation
citroen.com/oss. system does not release the driver
from the responsibility for a
correct, vigilant attitude in road
traffic. Always follow the
applicable traffic rules.
 Introduction 7

9 Warning Theft-deterrent feature

The Infotainment system is equipped
In some areas one-way streets with an electronic security system for
and other roads and entrances the purpose of theft deterrence.
(e.g. pedestrian zones) that you The Infotainment system therefore
are not allowed to turn into are not functions only in your vehicle and is
marked on the map. In such areas worthless to a thief.
the Infotainment system may
issue a warning that must be
accepted. Here you must pay
particular attention to one-way
streets, roads and entrances that
you are not allowed to drive into.

Radio reception
Radio reception may be disrupted by
static, noise, distortion or loss of
reception due to:
● changes in distance from the
transmitter
● multi-path reception due to
reflection
● shadowing
8 Introduction

Control elements overview

Control panel – Multimedia Navi Pro
 Introduction 9
1 AUDIO 5 SET / m Steering wheel controls
Open audio menu: Open settings menu .............. 14
Radio ..................................... 21 or open charging settings
(electric vehicles), see
External devices (USB,
Owner's Manual
Bluetooth) .............................. 26
6 d
2 NAV
Display embedded Open apps menu .................. 29
navigation map ..................... 31 7 7
3 6 Open vehicle settings
Open phone menu ................ 47 menu, see Owner's Manual
8 Info Display
Display phone projection 1 SRC (Source)
screen when phone Home menu will be
projection is active ................ 29 displayed by a 3-finger Select audio source,
4 ) ........................................... 10 touch on screen confirm selection with A ...... 10

If switched off: switch Long press: mute system

power on / off 2 c/d
If switched on: mute system Select next / previous
preset radio station when
Turn: adjust volume radio active ............................ 21
or select next / previous
track / picture when
external devices active ......... 26
10 Introduction
or select next / previous or open call / contacts list ..... 47 Usage
entry in station list, media
list, call / contacts list when If phone call active: open
call in progress menu
Control elements
operation started via
steering wheel controls 7 Y The Infotainment system is operated
via function buttons, a touch screen
Confirm selection with A Short press: activate and menus that are shown on the
3 A embedded speech recognition display.
Long press: activate Inputs are made optionally via:
Confirm selected item
speech recognition in ● the control panel on the
or open station list, media list Apple CarPlay™ or Infotainment system 3 8
4 e Android™ Auto if phone ● the touchscreen 3 14
connected via USB port ........ 43
Activate / deactivate mute ● the steering wheel controls 3 8
function ................................. 10 ● the speech recognition 3 42
5 Y/Z
Switching the Infotainment
Turn upwards / system on or off
downwards: increase /
Press ). After switching on, the last
decrease volume
selected Infotainment source
6 6 becomes active.
Short press: accept Notice
incoming call Some functions of the Infotainment
system are only available if ignition
Long press: reject is switched on or engine is running.
incoming call, hang up call .... 47
 Introduction 11
Automatic switch-off Modes of operation
If the Infotainment system has been
switched on pressing ) while the Audio-Media
ignition is switched off, it will switch off Press AUDIO / b to display the main
again automatically when the Eco menu of the last selected audio mode.
mode becomes active.
Setting the volume
Turn ). The current setting is shown
on the display.
When the Infotainment system is
switched on, the last selected volume
is set. Select the desired media source.
For a detailed description of:
Speed compensated volume
When the speed compensated ● Radio functions 3 21
volume is activated 3 17, the ● External devices 3 27
volume is adapted automatically to
Changing the media source Navigation
make up for the road and wind noise
Select SOURCES to display the Press NAV / c to display the
as you drive.
menu for media source selection. navigation map showing the area
Mute Notice around the current location.
Press ) to mute the Infotainment For a detailed description of menu
system. operation via touch screen 3 14.
To cancel the mute function,
press ) again. The last selected
volume is set again.
12 Introduction
For a detailed description of
preparing and establishing a
Bluetooth connection between the
Infotainment system and a mobile
phone 3 45.
If the mobile phone is connected,
press 6 to display the main menu of
the phone function.

For a detailed description of basic The navigation menu serves as

functions of the navigation system central entry point for:
3 31. ● Address search and input
Navigation menu 3 35
Select MENU to display the ● Defining trips with several
navigation menu. waypoints 3 35
● Defining criteria for route
guidance 3 39
● Cancelling and resuming route For a detailed description of mobile
guidance 3 39 phone operation via the Infotainment
system 3 47.
Phone
Before the phone function can be Network and connected services
used, a connection has to be Press d and then select OPTIONS
established between the Infotainment to display the Bluetooth, network and
system and the mobile phone. connected services settings.
 Introduction 13
To connect the vehicle to a Wi-Fi Settings
network, touch y. A list of all Press SET / z and then select Audio
available Wi-Fi networks is displayed. settings to display the respective
It is also possible to share the Wi-Fi menu.
connection for other devices.
To update the service and connection
status, go to the menu for connected
services z and touch R.
To use the connected services, make
sure that data sharing and the vehicle
position are activated in the privacy
menu in the System settings.
For a detailed description 3 14.
Apps
Vehicle settings
To show specific apps of your
smartphone on the display of the Select _ to open a menu for various
Infotainment system, connect your vehicle-related settings.
For a detailed description 3 14.
smartphone. Vehicle settings are described in the
Press SET / z and then OPTIONS to Owner's Manual.
Press d to display the main menu of
display a menu for various system-
the apps mode. related settings.
Touch Apple CarPlay or
Android Auto. A menu with different
selectable apps is displayed.
For a detailed description 3 29.
14 Basic operation

Basic operation Basic operation Touch a screen button or menu item.

Notice
The display of the Infotainment Most icons displayed in a menu, like
system has a touch-sensitive surface e or d in the illustrated example,
Basic operation ............................ 14 that allows direct interaction with the serve as screen buttons that initiate
Tone settings ............................... 17 displayed menu controls. certain actions if you touch them.
Volume settings ........................... 17 The corresponding system function is
Caution activated, a message is shown, or a
System settings ........................... 18
submenu with further options is
Do not use pointed or hard items displayed.
like ballpoint pens, pencils or
similar for touch screen operation. 3 and A / OK screen buttons

Menu operation
Selecting or activating a screen
button or menu item

When operating the menus, touch

3 in the respective submenu to
return to the next higher menu level.
 Basic operation 15
When no 3 screen button is Scrolling a list ● Touch anywhere on the guiding
displayed, you are on the top level of line of the scroll bar.
the respective menu. ● Move the slider of the scroll bar
After selecting menu items or up and down with your finger.
performing settings in a menu, touch
A / OK to confirm your settings. Updating a list
Otherwise all performed selections or Touch U to manually update, e.g.,
settings will be lost. station lists, contacts lists or
destination lists.
Shortcuts to important menus
Input fields and keyboards

If there are more items available than

presentable on the screen, the list
must be scrolled.
To scroll through a list of menu items,
you may optionally:
● Place your finger anywhere on
the screen and move it upwards
or downwards.
The texts and icons displayed in the Notice
top bar, of e.g. the navigation main Constant pressure must be applied Input fields are indicated by >.
menu, serve as shortcuts to some and the finger must be moved at a Touch the input field to open a
important menus. For example, touch constant speed. keyboard for text or number input.
the station name to open the station ● Touch S or R at the top or
list menu. bottom of the scroll bar.
16 Basic operation
Depending on the application or To switch back to the letter keyboard Keyboards for number input may
function currently active, different or to switch between capital and small contain several input fields. In the
keyboards are displayed. letters, touch Aa. illustrated example, you first need to
Keyboards for text input To switch the letter keyboard touch the input field behind the
between normal order and decimal point, before you can enter
alphabetical order, touch M. the decimal digits.
To delete the most recently entered Adjusting a setting
character or symbol, touch T.
To delete a character or symbol at
any point of your input: touch at the
desired point to place a blinking
cursor, then touch T.
Keyboards for number input

Keyboards for text input may contain

several input fields. To enable a field
for text input, touch it.
To enter a character, touch the To adjust a setting like the illustrated
respective screen button. The example, you may optionally:
character is entered upon release.
● Touch P or Q.
Touch and hold a letter screen button
to display associated letters in a letter ● Touch anywhere on the line.
pop-up menu. Release and then ● Move the slider with your finger.
select the desired letter.
To switch to the symbol keyboard,
touch 0..#.
 Basic operation 17

Tone settings Notice To change the current setting, e.g. All

If you change the settings of a passengers, select that setting and
Press SET / z, select Audio predefined setting, e.g. Pop-Rock, then select the desired new setting
settings and then select the this settings will be applied to the from the displayed list.
Ambience tab. User or Personalised setting. You may individually adjust the
Activating the Loudness function may predefined settings.
optimise the tone at low volume To define the point in the passenger
levels. compartment where the volume is at
its highest level, move the cursor in
Balance and fader the illustration on the right side of the
Select the Balance tab. screen to the desired point.
To return to the default factory
settings, select h.

Volume settings
Press SET / z, select Audio
Several predefined settings are settings and then select the Sound
available to optimise the tone for a tab.
specific style of music (e.g. Pop-
Rock or Classical). Audible touch feedback
To adjust the tone individually, select If the audible touch feedback function
User or Personalised. Change the is activated, each touch of a screen
settings as desired and then confirm button or menu item is indicated by a
your settings. Several predefined settings are beeping sound.
available to adjust the volume
To adjust the touch beep volume,
distribution inside the vehicle (e.g. All
activate Touch tones and then adjust
passengers or Front only).
the setting.
18 Basic operation
Speed compensated volume Changing display language
Activate or deactivate Volume linked To adjust the language for the menu
to speed. texts, select Languages and then
If activated, the volume of the select the desired language.
Infotainment system is adapted Notice
automatically to make up for the road If the selected display language is
and wind noise as you drive. supported by the embedded speech
recognition, the language of the
Speech output speech recognition will be changed
Select the Voice tab. accordingly; if not, embedded
speech recognition will be not
Adjust the volume for all speech
available.
outputs of the system, e.g. traffic Configuring the system
announcements, navigation Adjusting time and date
messages etc. Select System settings to perform
some basic system configurations, Select Setting the time-date.
Ringtone e.g.:
Select the Ringtone tab. ● Adjust the display of units for
temperature or fuel consumption.
Adjust the ringtone volume of
incoming calls. ● Reset the system configuration to
factory defaults.
System settings ● Update the installed software
version.
Press SET / z and then select
● Adjust the privacy settings for
OPTIONS.
data sharing and vehicle position.
 Basic operation 19
Changing time and date formats Adjusting the brightness In case you share the vehicle with
To change the time and date formats, Select Brightness and set the other people, this enables you to
select the respective tabs and then brightness of the screen to the restore your personal settings from
select the desired formats. desired level. your profile at any time.
A maximum of three personal profiles
Setting time and date Storing your personal settings may be stored.
By default the displayed time and
Select Setting of the profiles. Additionally, a Common profile is
date is automatically adjusted by the
system. available. All settings done at any
time are automatically stored in that
To manually adjust the displayed time profile. If no personal profile is
and date: activated, the Common profile is
Select the Time tab. active.
Set Synchronization with GPS (UTC)
Storing your personal profile
to OFF and then select the Time field
to set the desired time. After performing all your personal
settings:
Select the Date tab and then select
the Date: field to set the desired date. Select one of the personal profile
tabs.
Adjusting the screen Select the input field > and enter the
Select Screen configuration. desired name of your personal profile.
You can store a multitude of settings
in a personal profile. For example, all If you want to add a photo to the
Text scroll function current tone settings, all radio profile:
Select the Animation tab. presets, one phone book, the map Connect a USB device with the
If long texts on the screen should be settings and your preferred desired photo stored on it to the USB
scrolled automatically, activate addresses. port 3 26, touch the photo frame
Automatic scrolling. and then select the desired photo.
If Automatic scrolling is deactivated, Confirm your selection to download
long texts are truncated. the selected photo to the system.
20 Basic operation
Finally, confirm your inputs to store
them in your personal profile.
Activating your personal profile
Press z and then select the tab with
the name of your personal profile.
Activating the Common profile
If a personal profile is currently active:
Press z and then select Deactivate
profile.
Resetting a personal profile
You can at any time reset a personal
profile to restore the default factory
settings on that profile.
Select the respective profile and then
select Reset profile.
Resetting the Common profile
You can at any time reset the
Common profile to restore the default
factory settings on that profile.
Select Common profile and then
select Reset the common profile.
 Radio 21

Radio Usage Searching for stations

Activating the radio Automatic station search

Briefly touch P or Q to play the
Press AUDIO / b. The audio main previous or next receivable station.
Usage .......................................... 21
menu last selected is displayed.
Radio data system ....................... 23 Manual station search
If the radio main menu is not active,
Digital audio broadcasting ........... 23 select SOURCES and then select Press and hold P or Q. Release when
Radio. the required frequency has almost
been reached.
A search is made for the next station
that can be received and it is played
automatically.
Station tuning
If you exactly know the reception
frequency of a radio station, you may
enter that frequency manually.
Select OPTIONS, select Radio
stations and then select the desired
waveband.
Select Freq., enter the reception
The station last played will be
frequency and confirm your input.
received.
If a station is receivable on that
Selecting a waveband frequency, the respective station is
played.
Repeatedly select Band to toggle
between the different wavebands.
22 Radio
Station lists
In the station lists, all receivable radio
stations within the current reception
area are available for selection.
To display the station list of the
waveband currently active, select
List.
Select the desired station.
Update station lists
If the stations stored in the waveband-
specific station list can no longer be
received, the AM and the DAB station
lists must be updated. The FM station Storing the currently active station Briefly touch the button next to the
list is updated automatically. Touch and hold the desired button for desired station. Alternatively, select
a few seconds. The respective 7 to switch to the tiled view. Then
Select OPTIONS, select Radio
frequency or station name is briefly touch a on the tile of the
stations and then select the desired
displayed on the button. desired station.
waveband.
If a station is already stored on a Select Add to favourites and then
To start an update for the selected
preset button, that station will be touch and hold for a few seconds on
waveband, select U.
overwritten by the new one. the list row where you want to store
Storing favourite stations the station.
Storing a station from a station list If a station is already stored on a list
Up to 15 radio stations of all Select OPTIONS, select Radio row, that station will be overwritten by
wavebands can be stored as stations and then select the desired the new one.
favourites in the Presets list. waveband.
Select Presets to display the preset Retrieving stations
buttons. In the radio main menu select
Presets and then briefly touch the
preset button of the desired station.
 Radio 23

Radio data system RDS configuration Select Announcements and then

activate or deactivate Traffic
Radio data system (RDS) is a service In the radio main menu select announcement.
of FM stations that considerably OPTIONS and then select Radio
facilitates the finding of the desired settings to open the menu for RDS If Traffic announcement is activated,
station and its fault-free reception. configuration. TA is displayed in the bottom line of
the radio main menu.
Advantages of RDS Activating RDS
● On the display, the programme Select General and then activate Digital audio broadcasting
name of the station appears Alternative frequency.
Digital audio broadcasting (DAB)
instead of its frequency. If Alternative frequency is activated, broadcasts radio stations digitally.
● During a station search, the RDS is displayed in the bottom line of
the radio main menu. DAB stations are indicated by the
Infotainment system tunes in to programme name instead of the
RDS stations only. Radio text broadcasting frequency.
● The Infotainment system always If RDS is activated, information on the
tunes into the best receivable General information
radio programme currently active or
broadcasting frequency of the set the music track currently playing are ● With DAB, several radio
station by means of AF displayed below the programme programmes (services) can be
(alternative frequency). name. broadcast on a single ensemble.
● Depending on the station that is To show or hide the information, ● Besides high-quality digital audio
received, the Infotainment activate or deactivate Display radio services, DAB is also able to
system displays radio text that text. transmit programme-associated
can contain e.g. information on data and a multitude of other data
the current programme. Traffic announcements services including travel and
Many RDS stations broadcast traffic traffic information.
news. If the traffic announcements
function is activated, radio or media
playback is interrupted for the
duration of a traffic announcement.
24 Radio
● As long as a given DAB receiver background and continually FM-DAB Linking
can pick up the signal sent out by searches for the FM stations with
a broadcasting station (even if the best reception. If Traffic This function enables switching from
the signal is very weak), sound announcement 3 23 is activated, an FM station to a corresponding
reproduction is ensured. traffic announcements of the FM DAB station and vice versa.
● In the event of poor reception, the station with the best reception Switching from FM to DAB occurs as
volume is reduced automatically are issued. Deactivate Traffic soon as a corresponding DAB station
to avoid the output of announcement if DAB reception is available. Therefore, it is
disagreeable noises. should not be interrupted by FM recommended to store favourite
traffic announcements. stations as DAB stations to reduce
If the DAB signal is too weak to frequent switching.
be picked up by the receiver, DAB Announcements
reception is interrupted Switching from DAB to FM occurs if
completely. This incident can be Besides their music programmes, a the signal is too weak to be picked up
avoided by activating DAB-FM lot of DAB stations also broadcast by the receiver and the corresponding
auto tracking, see below. announcements of various FM station is available.
categories. If you activate some or all Notice
● Interference caused by stations
categories, the currently received After switching, the volume might be
that are on nearby frequencies (a
DAB service is interrupted when an different.
phenomenon that is typical of AM
announcement of these categories is
and FM reception) does not Activation
made.
occur with DAB. Precondition is that Alternative
In the radio main menu select
● If the DAB signal is reflected by frequency is activated before FM-
OPTIONS, select Radio settings and
natural obstacles or buildings, DAB Linking can be activated.
then select Announcements.
the reception quality of DAB is To activate FM-DAB Linking, go to
improved, whereas AM or FM Activate the desired announcement
categories, e.g., News or Weather. OPTIONS I Radio settings I
reception is considerably General and select FM-DAB Follow-
impaired in such cases. Different announcement categories
can be selected at the same time. up.
● When DAB reception is enabled,
the FM tuner of the Infotainment
system remains active in the
 Radio 25
The following symbol will be
displayed when FM-DAB Linking is
activated:

Deactivation
To deactivate FM-DAB Linking, go to
OPTIONS I Radio settings I
General and deselect FM-DAB
Follow-up.
FM-DAB Linking will automatically be
deactivated when Alternative
frequency is deactivated.
26 External devices

External devices General information Notice

Not all auxiliary devices are
A USB port is located in the centre supported by the Infotainment
console. system.
General information ..................... 26 Caution Connecting / disconnecting a device
Playing audio ............................... 27 Connect one of the devices
Displaying pictures ....................... 28 To protect the system, do not use mentioned above to a USB port. If
a USB hub. required, use the appropriate
Using smartphone applications . . . 29 connection cable. The music function
Notice starts automatically.
The USB ports must always be kept Notice
clean and dry. If a non-readable USB device is
USB ports connected, a corresponding error
message appears and the
An MP3 player, USB device, SD card Infotainment system automatically
(via USB connector / adapter) or switches to the previous function.
smartphone can be connected to the
USB port. To disconnect a USB device, select
another function and then remove the
The Infotainment system can play USB device.
audio files or show picture files
contained in USB devices. Caution
When connected to a USB port,
various functions of the devices Avoid disconnecting the device
mentioned above can be operated via during playback. This may
the controls and menus of the damage the device or the
Infotainment system. Infotainment system.
 External devices 27
Bluetooth audio streaming Press AUDIO / b, select SOURCES Fast forwarding and rewinding
and then select the respective Touch and hold P or Q. Release to
Streaming allows you to listen to source. return to normal playback mode.
music from your smartphone.
Playback of the audio tracks starts Alternatively, you can move the slider
For a detailed description on how to automatically. showing the current track position to
establish a Bluetooth connection the left or right.
3 46.
Playing tracks randomly
If audio playback does not start
Touch button repeatedly to toggle
automatically, it may be necessary to
between the available random
start the playback on the smartphone.
modes.
First adjust the volume on your
j: play tracks of currently selected
smartphone (to a high level). Then
adjust the volume of Infotainment list (album, artist, etc.) in random
system. order.
2: play all tracks stored on
File formats connected device in random order.
The audio equipment supports k: play tracks of currently selected
different file formats. list (album, artist, etc.) in normal
Playback functions playback mode.
Playing audio Interrupting and resuming playback Repeating tracks
Touch 5 to interrupt playback. The Touch button repeatedly to switch
Activating the music function screen button changes to 4. repeat mode on or off.
Connecting the USB or Bluetooth Touch 4 to resume playback. n: repeat tracks of currently
device 3 26. selected list (album, artist, etc.).
Playing the previous or next track
If device already connected, but Touch P or Q. l: play tracks of currently selected
playback of stored music files not list (album, artist, etc.) in normal
active: playback mode.
28 External devices
Browse music functions If you want to change the currently
active USB source, select Other.
(only available for devices connected
via USB) Select the desired sorting criteria, e.g.
Albums or Artists, and then select the
You can have your music files sorted desired track.
according to different criteria. Two
options are available for browsing the Playback of the selected track is
music files stored on the connected started.
USB device.
Browsing via main menu Displaying pictures
If you want to change the currently You can view pictures stored on a
active USB source, select USB device.
SOURCES and then select the Touch the screen to display the menu
desired source. The respective main Activating the picture viewer bar.
menu is displayed.
Connecting the USB device 3 26.
Select the button showing the Viewing the previous or next
If device already connected, but picture
currently selected sorting criteria, e.g.
picture viewer not active:
Sort: Album or Sort: Artist, and then
select the desired new sorting criteria. Press AUDIO / b, select OPTIONS Touch f or g.
A sorting process is performed. and then select Managing photos.
Starting or stopping a slide show
Select List and then select the desired Select the desired picture.
track. Select 4 to view the pictures stored
A slide show of all stored picture files
starts automatically. on the USB device in a slide show.
Playback of the selected track is
started. Touch 5 to end the slide show.
Browsing via device menu
Select OPTIONS and then select
Music files.
 External devices 29

Using smartphone If the phone is already connected via

Bluetooth, upon connecting to the
applications USB port and launching Apple
Phone projection CarPlay, the Bluetooth connection
will disconnect.
The phone projection applications Android phone
Apple CarPlay and Android Auto Connect the phone via Bluetooth
display selected apps from your 3 46 and then connect the phone to
smartphone on the Info Display and
the USB port 3 26.
allow their operation directly via the
Infotainment controls. Starting phone projection
Check with the device's manufacturer Press d and then touch
if this function is compatible with your Apple CarPlay or Android Auto.
smartphone and if this application is
The phone projection screen
available in the country you are in.
displayed depends on your
Preparing the smartphone smartphone and software version.
iPhone®: Make sure Siri® is activated Returning to the Infotainment screen
on your phone. Press, e.g., the AUDIO / b button on
Android phone: Download the the control panel.
Android Auto app to your phone from
the Google Play™ Store.
Connecting the smartphone
iPhone
Connect the phone to the USB port
3 26.
30 Navigation

Navigation General information Functioning of the navigation

system
This chapter is about the embedded
navigation system which guides to The position and movement of the
desired destinations. vehicle are detected by the navigation
General information ..................... 30
The current traffic situation is taken system using sensors. The travelled
Usage .......................................... 31 into account in the route calculation. distance is determined by the
Destination input .......................... 35 For this purpose, the Infotainment vehicle’s speedometer signal, turning
Guidance ..................................... 39 system receives traffic movements on bends by a sensor.
announcements in the current The position is determined by the
reception area via RDS-TMC. GPS (Global Positioning System)
satellites.
The navigation system cannot,
however, take into account traffic By comparing the sensor signals with
incidents, traffic regulations changed the digital maps, it is possible to
at short notice and hazards or determine the position with an
problems that arise suddenly (e.g. accuracy of approx. 10 m.
road works). The system will also work with poor
GPS reception. However, the
Caution accuracy of the determination of the
position will be reduced.
The usage of the navigation After the entry of the destination
system does not release the driver address or point of interest (nearest
from the responsibility for a petrol station, hotel, etc.), the route is
correct, vigilant attitude in road calculated from the current location to
traffic. The relevant traffic the destination selected.
regulations must always be
followed. If a navigation instruction Route guidance is provided by voice
contradicts traffic regulations, the output and an arrow, as well as with
traffic regulations always apply. the aid of a multi-colour map display.
 Navigation 31
Important information Network and connected services The installation of the map update will
3 10. take up to 1 hour. Do not switch off the
TMC traffic information system and The privacy menu and the menu for engine during the installation
dynamic route guidance connected services are also process.
The TMC traffic information system accessible via the message icon on Some functions of the Infotainment
receives all current traffic information the screen. system, e.g. the navigation function,
from TMC radio stations. This are not available during the
information is included in the Map data installation process.
calculation of the overall route. During All required map data is stored within
this process, the route is planned so the Infotainment system.
that traffic problems related to pre- Usage
Map updates are available at a
selected criteria are avoided.
Vauxhall Service Partner or at the Information on the map display
To be able to use TMC traffic MyVauxhall customer portal. To
information, the system must receive download the map updates from the Press NAV / c to display the
TMC stations in the relevant region. Vauxhall customer portal, a navigation map showing the area
MyVauxhall account and an empty around the current location.
Live navigation USB stick with at least 32 GB memory
When data sharing and the vehicle and FAT 32 formatting are necessary.
position are activated, the navigation
system will show online traffic Download and save the map data on
information as well as online a computer and unpack the data onto
information for parking, fuel prices the USB stick.
and weather. The services can be To update the map data in the
stopped at anytime by deactivating Infotainment system, connect the
data sharing and the vehicle position. USB stick to the Infotainment system,
Data sharing and the vehicle position select the navigation function and
can be activated or deactivated via follow the steps on the Info Display.
the privacy menu in the System
settings.
32 Navigation
Route guidance not active Route guidance active manoeuvre may be displayed
additionally.
● The arrival time and the
remaining distance to the
destination is shown at the top
right of the map view.
Customise the map display
Map views
Different map views are available.
Touch L to toggle between the
different map views.
Depending on the map view, the
● The map view is displayed. ● The map view is displayed.
remaining range is displayed as a
● The current location is indicated ● The active route is indicated by a circle (electric vehicles).
by an arrow. coloured line.
● The name of the street you are ● The moving vehicle is marked by Map colours
currently in is displayed at the an arrow pointing into the Depending on the external lighting
bottom left of the map view. direction of travel. conditions, the colouring of the map
screen (light colours for the day and
● Public charging stations are ● The next turning manoeuvre is dark colours for the night) can be
indicated (electric vehicles). shown in a separate field at the adapted.
top left of the map view.
Touch ! to display a menu on the
Depending on the situation
right side of the screen.
information on lane guidance or
the second next turning
 Navigation 33
Alternatively, select POI on map to Touch the traffic jam icon to show
display a menu with a multitude of traffic events on the map. Touch ß
POI categories and subcategories to to show a list with information on
choose from. Activate the desired these traffic events.
POI categories. Touch the charging station icon to
Traffic events display a circle that indicates the
remaining range (electric vehicles).
Traffic events may be indicated on the
map. Additionally, information on If you want to display a different map
these events may be displayed in a section:
list. Touch + to show the area around the
Select Consult map to switch to an current location.
Select Map colour repeatedly to alternative map display with new Touch , to show the entire route.
toggle between light and dark menu options.
Touch . to show the area around the
colours. destination.
POI (Points of Interest) icons on the To return to the default navigation
map view, touch 3.
POIs are points of general interest,
e.g. petrol stations or car parks.
The display of POI categories shown
on the map may be personally
adapted.
Activate the desired POI categories.
The map view changes accordingly.

The map view is switched to North

orientation mode and and may
display a greater part of the route.
34 Navigation
Autozoom function Activate or deactivate Automatic 0: show area around destination.
zoom setting. To return to the default navigation
Map manipulation view, select 3.

Moving visible map section Centring visible map section

Place your finger anywhere on the Touch the desired location on the
screen and move it in the desired screen to centre the map around this
direction. location.
The map moves accordingly, A red K is displayed at the respective
displaying a new section. A new location and the corresponding
button bar is shown. address is shown on a label.
Manual zooming
To zoom in on a selected map
If the autozoom function is activated location, place two fingers on the
(AUTO is displayed below the map screen and move them away from
view), the zoom level changes each other.
automatically when approaching a
turning manoeuvre during active Alternatively, touch + below the map
route guidance. This way, you always view.
get a good overview of the respective To zoom out and display a larger area
manoeuvre. around the selected location, place
If the autozoom function is two fingers on the screen and move
deactivated, the selected zoom level them towards each other.
remains the same during the whole Alternatively, touch - below the map
route guidance process. 8: show area around current view.
location again.
To activate or deactivate the function:
9: show area around home Showing an overview of the route
Select MENU, select Settings and Touch !, select Consult map and
then select the Aspect tab. address.
then touch ,.
 Navigation 35
The map view is switched to North Navigation settings Press NAV / c to display the
orientation and shows an overview of navigation main menu.
the current route. Select MENU in the navigation main
menu, and then select Settings to
display the respective menu with a
variety of navigation related settings.

Selecting an address from the

To return to the default navigation map
view, touch 3.
Touch the desired location on the
Voice guidance Please explore the different settings. map. The map centres around this
Some have already been described location.
The route guidance process can be above, others are described in the
supported by voice prompts given out following sections. A red K is displayed at the respective
by the system. location and the corresponding
To activate or deactivate the function: address is shown on a label.
Destination input To start route guidance, select L.
Select MENU in the navigation main The navigation system provides
menu, select Settings and then select various options to set a destination for For a detailed description on route
the Vocal tab. route guidance. guidance 3 39.
Activate or deactivate Activate
navigation messages.
36 Navigation
Quick address or POI search Enter an address or search term. As Select the desired option.
soon as characters are entered an ● If the navigation system needs
Select Search…. A menu with a list of address search is performed and the
recent destinations and a keyboard is more detailed information for
list of found addresses is updated route calculation:
displayed. continuously.
Enter a further search term to
Select the desired list item. refine your search.
Depending on the current situation
and your selection, the navigation Detailed address entry
system may react differently: Select MENU and then select Enter
● If the selected list item is a valid address to display a keyboard for
destination address and route address entry.
guidance is currently not active:
The navigation main menu is
displayed again and route
guidance is started.
For a detailed description on
To refine the area for your address or route guidance 3 39.
POI search, select J and then select ● If the selected list item is a valid
the desired option. destination address but route
guidance is already active:
To hide the keyboard and show the
entire list, select N. To show the A message is displayed and you
keyboard again, select O. need to decide first if the old
destination should be replaced,
If you want to search for POIs (Points or if you want to add the selected As soon as characters are entered,
of Interest) only, select the POI tab. address as an intermediate an address search is started. Every
destination to a waypoint trip. additional character is considered in
Detailed description on waypoint the matching process and a list of
trips, see below. matching addresses is displayed.
 Navigation 37
Select the desired address or change
your input to initiate a new search.
Continue with the address entry until
the entire address you are searching
for is found.
Notice
Make sure that the correct country is
selected. To change the country,
touch the country code in the upper
right corner.
To start route guidance to the
respective address, confirm your
You may store the address as, e.g., Select Recent to display a list of all
input.
your Home address or your Work recently entered destinations.
For a detailed description on route address. Select Preferred to display all
guidance 3 39.
Select the desired option, confirm destinations which were stored
Storing your favourite addresses your selection and then enter a name before as home address, work
for the address. address or preferred address.
If you want to store the entered
address, select 6. The stored address can then be Select Contacts to display a list with
easily selected as destination contact names and all related
address via the destination lists addresses stored before as personal
Preferred or Contacts, see below. contacts.
To start route guidance to the
Destination lists
respective address, select a list entry.
Select MENU and then select My For a detailed description on route
destinations. guidance 3 39.
38 Navigation
Points of interest A red K is displayed at the respective Select a POI main category, e.g.,
location and the corresponding Travel and then select a subcategory,
A point of interest (POI) is a specific address is shown on a label. e.g. Airport. A new menu is displayed.
location that might be of general
interest, e.g. a petrol station, a Touch and hold K. Select a search area, e.g., Around the
parking area or a restaurant. vehicle to refine the search.
A list of POIs around the location is
The data stored within the navigation displayed. After the POI search is performed,
system contains a great number of select the desired POI.
Select the desired POI to start route
predefined POIs, which are indicated guidance. To search for POIs at another
on the map (if activated, 3 31). location, select Address.
For a detailed description on route
guidance 3 39. To search for POIs via keyword (see
Selecting a POI from the map below), select Search.
Touch the desired POI icon on the Searching for POIs via categories
map. The map centres around this Select MENU and then select Points Searching via keyword
location. of interest. Select MENU, select Search, enter a
Touch the icon again. keyword, e.g., "Station", enter or
A red K is displayed at the respective select a city name and confirm your
input.
location and the corresponding
address is shown on a label. After the POI search is performed,
select the desired POI.
To start route guidance, select L.
For a detailed description on route Waypoint trips
guidance 3 39.
A waypoint is an intermediate
Showing a list of POIs around a destination that is considered in the
location calculation of a route to its final
Touch the desired location on the destination. To create a waypoint trip,
map. The map centres around this you may add one or several
location. waypoints.
 Navigation 39
Enter or select the final destination of Touch k and then touch the displayed Visual instructions
your waypoint trip and start route arrows to move the list entries up or Visual instructions are provided on
guidance. down. the display.
While under active route guidance, Select Calculate to recalculate the
select MENU and then select Route / route according to the changed order.
Waypoints. To return to the navigation main
menu, select Finish.
To display a detailed route list of the
waypoint trip, select the Route tab.

Notice
When route guidance is active and
you are not within the navigation
Select Add waypoint and then select application, turning manoeuvres are
an option for address entry, e.g. Find shown on the instrument cluster
POI. display.
Enter or select a new address. The Voice guidance
address is inserted into the list of Guidance Navigation voice prompts announce
waypoints. which direction to follow, when
Route guidance is provided by the approaching an intersection at which
If desired, enter further waypoints as navigation system through visual
described above. you need to turn.
instructions and voice prompts (voice
If you want to change the order of the guidance).
waypoints:
40 Navigation
To activate or deactivate the voice During active route guidance, the
prompts function select MENU in the route can be modified according to
navigation main menu, select incoming traffic messages.
Settings, select the Vocal tab and Three options are available for Take
then activate or deactivate Activate account of traffic:
navigation messages.
If you want the system to
If voice prompts are activated you can automatically modify the route
additionally specify whether street according to new traffic messages,
names should be spoken or not. select Automatic.
To replay the last voice guidance If you want to be consulted when a
instruction, touch the turn arrow on route is modified, select Manual.
the left side of the screen.
If you do not want routes to be
When the menu is opened, several
Settings for route guidance modified, select None.
optional routes are automatically
Select MENU in the navigation main calculated by the navigation system, Starting, cancelling, resuming
menu and then select Guidance e.g. the fastest route or the most route guidance
criteria to display the respective ecological route.
menu. To show the different optional routes To start route guidance, enter or
on a map, select See on map. select a destination address 3 35.
Depending on the situation, route
If you want, e.g., avoid motorways on guidance may start automatically, or
your route, set the respective option you may have to follow some
to OFF. instructions on the screen.
Take account of traffic To cancel route guidance, select
Traffic events are taken into MENU in the navigation main menu
consideration when the system and then select STOP NAVIGATION.
determines a route to a destination.
 Navigation 41
To resume a cancelled route To display a turning manoeuvre on
guidance, select MENU in the the map, touch the turn arrow icon
navigation main menu and then next to the desired list entry. The map
select RESUME GUIDANCE. jumps to the respective location on
the map.
Turn list
The next turning manoeuvre is
displayed on the left side of the
screen.
To display a list of all upcoming turns
on the active route, select MENU in
the navigation main menu, select
Route / Waypoints and then select the
Route tab.

To display the previous or next

turning manoeuvre on the map, touch
P or Q.
To avoid the route section currently
displayed on the map, touch 6.
If desired, further route sections may
be selected to be avoided.
Confirm your selection(s).
42 Speech recognition

Speech recognition General information system functions, the speech

recognition does not start until it has
Embedded speech recognition been activated.
The embedded speech recognition of Important information
General information ..................... 42 the Infotainment system enables you Language support
Usage .......................................... 43 to operate various functions of the ● Not all languages available for
Infotainment system via voice input. It the display of the Infotainment
recognises commands and numeric system are also available for the
sequences independently of the speech recognition.
relevant speaker. The commands ● If the display language currently
and numeric sequences can be selected is not supported by the
spoken without a voice pause speech recognition, speech
between the individual words. recognition is not available.
In the event of incorrect operation or In such a case, you need to select
commands, the speech recognition another language for the display
gives visual and / or acoustic if you want to control the
feedback and requests you to re- Infotainment system via voice
enter the desired command. Apart input. To change the display
from this, the speech recognition language 3 18.
acknowledges important commands
and will enquire if necessary. Address input of destinations in
foreign countries
In general, there are different ways to In case you want to enter the address
speak commands for performing the of a destination located in a foreign
desired actions. country via voice input, you need to
Notice change the language of the Info
To ensure that conversations inside Display to the language of the foreign
the vehicle do not lead to country.
unintentional triggering of the
 Speech recognition 43
E.g., if the display is currently set to Usage Adjusting the volume of voice
English and you want to enter the prompts
name of a city located in France, you Embedded speech recognition Press volume button on the steering
need to change the display language wheel upwards (increase volume)
to French. Activating speech recognition Y or downwards (decrease volume)
For changing the display language, Notice Z.
see "Language" in chapter "System Speech recognition is not available
settings" 3 18. during an active phone call. Interrupting a voice prompt
As an experienced user, you can
Input order for destination addresses Activation via the Y button on the interrupt a voice prompt by briefly
The order in which the parts of an steering wheel pressing Y on the steering wheel.
address need to be entered using the Press Y on the steering wheel.
speech recognition system is Alternatively you can say "Set
The audio system mutes, a voice dialogue mode as expert".
dependent on the country where the
output message prompts you to say a
destination is located. A beep is heard immediately, and a
command, and help menus with the
If the speech recognition system command can be stated without
most important commands currently
rejects your address entry, repeat the having to wait.
available are shown on the display.
command with a different order of the
The speech recognition is ready for Cancelling a dialogue sequence
address parts.
voice input, after a beep has been To cancel a dialogue sequence and
Voice pass-thru application given. to deactivate the speech recognition,
You can now say a voice command to press 6 on the steering wheel.
The voice pass-thru application of the initiate a system function (e.g. playing
Infotainment system allows access to If you do not say any command for a
a preset radio station). certain period of time, or if you say
the speech recognition commands on
your smartphone. commands that are not recognised by
the system, a dialogue sequence is
Voice pass-through is available via automatically cancelled.
the phone projection applications
Apple CarPlay and Android Auto
3 29.
44 Speech recognition
Operation via speech commands Adjusting the volume of voice
Follow the instructions given by voice prompts
output and shown on the display. Turn ) on the control panel or press
For best results: volume button on the steering wheel
upwards (increase volume) Y or
● Listen for the voice prompt and
wait for the beep before saying a downwards (decrease volume) Z.
command or replying. Deactivating speech recognition
● Read the example commands on Press 6 on the steering wheel. The
the display. speech recognition session is ended.
● The voice prompt can be
interrupted by pressing Y again.
● Wait for the beep and then speak
the command naturally, not too
fast, not too slow.
Usually commands can be spoken in
a single command.
Voice pass-thru application
Activating speech recognition
Press and hold Y on the steering
wheel until a speech recognition
session is started.
 Phone 45

Phone General information Important information for

operation and traffic safety
The phone function provides you with
the possibility of having mobile phone
conversations via a vehicle 9 Warning
General information ..................... 45 microphone and the vehicle
Bluetooth connection ................... 46 loudspeakers as well as operating the Mobile phones have effects on
most important mobile phone your environment. For this reason
Operation ..................................... 47
functions via the Infotainment system safety regulations and directions
Mobile phones and CB radio have been prepared. You should
in the vehicle. To be able to use the
equipment .................................... 50 be familiar with the related
phone function, the mobile phone
must be connected to the directions before you use the
Infotainment system via Bluetooth. telephone function.
Not all phone functions are supported
by every mobile phone. The usable 9 Warning
phone functions depend on the
relevant mobile phone and network Use of the hands-free facility while
provider. You can find further driving can be dangerous because
information on this in the operating your concentration is reduced
instructions for your mobile phone, or when telephoning. Park your
you can enquire about them with your vehicle before you use the hands-
network provider. free facility. Follow the stipulations
of the country in which you find
yourself at present.
Do not forget to follow the special
regulations that apply in specific
areas and always switch off the
mobile phone if the use of mobile
phones is prohibited, if
46 Phone

interference is caused by the Important information Pairing a new device

mobile phone or if dangerous ● Two paired Bluetooth devices 1. Activate the Bluetooth function of
situations can occur. can be connected to the the Bluetooth device. For further
Infotainment system at the same information, see the operating
Bluetooth time. One device in hands-free instructions for the Bluetooth
mode, the other in audio device.
The phone function is certified by the streaming mode, see description 2. If another Bluetooth device is
Bluetooth Special Interest Group on Bluetooth profile settings already connected:
(SIG). below.
Press 6, select OPTIONS, select
You can find further information about However, two devices cannot be Bluetooth connection and then
the specification on the internet at used in hands-free mode at the touch * Search.
http://www.bluetooth.com. same time.
If no Bluetooth device is currently
● Pairing only needs to be carried
connected:
Bluetooth connection out once, unless the device is
Press 6 and then touch
deleted from the list of paired
Bluetooth is a radio standard for the Bluetooth search.
devices. If the device has been
wireless connection of e.g. mobile
connected previously, the A search for all Bluetooth devices
phones, smartphones or other
Infotainment system establishes in the near environment is
devices.
the connection automatically. performed.
Pairing a device ● Bluetooth operation considerably 3. Select the Bluetooth device you
drains the device's battery. wish to pair from the displayed list.
During the pairing process, PIN code Therefore, connect the device to
exchange between the Bluetooth 4. Confirm the pairing procedure:
the USB port for charging.
device and the Infotainment system ● If SSP (secure simple
and connection of the Bluetooth pairing) is supported:
devices to the Infotainment system
are carried out.
 Phone 47
Confirm the messages on the messages displayed on the Disconnecting a device
Infotainment system and the Bluetooth device.
Bluetooth device. The currently connected device is
If this function is not supported by identified by W.
● If SSP (secure simple the Bluetooth device, a
pairing) is not supported: corresponding message is Select the device to disconnect it.
On the Infotainment system: displayed.
Deleting a paired device
a message is displayed
Operations on paired devices Touch f in the upper right corner of
asking you to enter a PIN
code on your Bluetooth Press 6, select OPTIONS and then the screen to display f icons next to
device. select Bluetooth connection. each paired device.
On the Bluetooth device: A list of all paired devices is Touch f next to the Bluetooth device
enter the PIN code and displayed. you want to delete and confirm the
confirm your input. displayed message.
5. Activate the functions you want Changing the Bluetooth profile
settings
the paired smartphone to perform
Touch a next to the desired paired
Operation
and confirm your settings. You
can change these Bluetooth device. As soon as a connection via
profile settings at any time, see Bluetooth has been set up between
Activate or deactivate the profile
below. your mobile phone and the
settings as desired and confirm your
Infotainment system, you can operate
The Infotainment system and the settings.
many functions of your mobile phone
device are paired. via the Infotainment system.
Connecting a paired device
6. The phone book is downloaded Devices which are paired but not Notice
automatically to the Infotainment connected are identified by X. In the hands-free mode, mobile
system. Depending on the phone,
Select the desired device to connect phone operation is still possible, e.g.
the Infotainment system must be
it. taking a call or adjusting the volume.
allowed access to the phone
book. If required, confirm the
48 Phone
After setup of a connection between Initiating a phone call
the mobile phone and the
Infotainment system, mobile phone Entering a phone number
data is transmitted to the Infotainment Enter a phone number using the
system. This can take some time keypad in the phone main menu.
depending on the mobile phone and
the amount of data to be transferred.
During this period, operation of the
mobile phone via the Infotainment
system is possible only to a limited
extent.
Notice
Not every mobile phone fully Notice
supports the phone function. The phone main menu is only
Therefore, deviations from the range available if a mobile phone is
of functions described below are connected to the Infotainment
possible. system via Bluetooth. For a detailed
Phone main menu description 3 46.
As soon as figures are entered,
Press 6 / a to display the phone Many functions of the mobile phone matching entries from the contacts list
can now be controlled via the phone are displayed in alphabetical order.
main menu.
main menu (and associated Touch the desired list entry to initiate
submenus), and via the phone- a phone call.
specific controls on the steering
wheel. Using the contacts list
The contacts list contains all phone
book entries from the connected
Bluetooth device and all contacts
from the navigation system.
 Phone 49
Select Contacts and then select the Connect a USB device with the
desired list type. desired photo stored on it to the USB
port 3 26, touch the photo frame and
then select the desired photo.
Confirm your selection to download
the selected photo to the system.
Using the call history
All incoming, outgoing, or missed
calls are registered.
Select Calls and then select the
desired list.
Select the desired list entry to initiate To answer the call, touch w.
a call. To reject the call, touch x.
Searching for a contact Incoming phone call To put the call on hold, touch 5. To
The contacts are ordered by the first resume to the call, touch 4.
name or surname. To change the If an audio mode, e.g. the radio or
order, touch <. USB mode, is active at the moment a During the ongoing call, the following
call comes in, the audio source is menu is displayed.
To scroll through the list, use the
scroll bar, S or R. muted and stays muted until the call
ends.
To search for a contact via keyboard,
A message with the caller's phone
touch Search.
number or name is displayed.
Modifying or deleting a contact
Select - next to the contact and then
select the desired option.
If you want to add a photo to the
contact:
50 Phone
Put incoming calls always on hold Mobile phones and CB radio
For safety reasons the phone function equipment
can put all incoming calls on hold by
default. Installation instructions and
To activate this function, select operating guidelines
OPTIONS, select Security and then The vehicle specific installation
select Put incoming calls on hold. instructions and the operating
guidelines of the mobile phone and
Quick messages hands-free manufacturer must be
Different quick messages can be sent observed when installing and
to contacts via the Infotainment operating a mobile telephone. Failure
system. to do so could invalidate the vehicle
To mute the microphone of the type approval (EU directive 95/54/
Infotainment system, touch Micro Select OPTIONS and then Quick
EC).
OFF. messages to display a list of quick
messages sorted by different Recommendations for fault-free
To continue conversation via the operation:
mobile phone (private mode), touch categories.
l Private. To reactivate the To send a quick message, select the ● Professionally installed exterior
conversation via the Infotainment respective message and choose the antenna to obtain the maximum
system, touch Y Private. contact. range possible.
● Maximum transmission power
Notice 10 W.
If you leave the vehicle and lock it
while you are still in a private mode ● Installation of the phone in a
phone conversation, the suitable spot, consider the area
Infotainment system may remain in which the airbag inflates. See
switched on until you leave the Owner's Manual, section Airbag
Bluetooth reception area of the system.
Infotainment system.
 Phone 51
Seek advice on predetermined
installation points for the external Caution
antenna or equipment holder and
ways of using devices with a Mobile telephones and radio
transmission power exceeding 10 W. equipment may lead to
malfunctions in the vehicle
Use of a hands-free attachment electronics when operated inside
without external antenna with mobile the vehicle with no exterior
telephone standards GSM antenna, unless the above
900/1800/1900 and UMTS is only mentioned regulations are
permitted if the maximum observed.
transmission power of the mobile
telephone is 2 W for GSM 900 or
1 W for the other types.
For reasons of safety, do not use the
phone while driving. Even use of a
hands-free set can be a distraction
while driving.

9 Warning
Operation of radio equipment and
mobile telephones which fail to
meet above mentioned mobile
telephone standards is only
permitted using an antenna
located outside of the vehicle.
52

Index A
Activating Bluetooth music........... 27
Change display language............. 18
Connected services...................... 10
Activating phone........................... 47 Contacts................................. 35, 47
Activating radio............................. 21 Control elements
Activating the navigation system. . 31 Infotainment system.................... 8
Activating USB audio.................... 27 Steering wheel............................ 8
Activating USB picture.................. 28 Control elements overview............. 8
Address book................................ 35
Adjust time and date..................... 18
D
Audio files..................................... 26 DAB
Auto volume.................................. 17 FM-DAB Linking........................ 23
Date
B adjust......................................... 18
Balance......................................... 17 Destination input .......................... 35
Basic operation............................. 14 Digital audio broadcasting............ 23
Bluetooth Display
Bluetooth connection................ 46 adjust brightness....................... 18
Bluetooth music menu.............. 27 change language...................... 18
Connecting device.................... 26 Displaying pictures....................... 28
General information................... 26 Display settings............................ 28
Pairing....................................... 46
Phone........................................ 47
E
Bluetooth connection.................... 46 Equaliser....................................... 17

C F
Call Factory default settings................ 18
Functions during a call.............. 47 Fader............................................ 17
Incoming call............................. 47 File formats................................... 26
Initiating a phone call................ 47 Audio files.................................. 26
Ring tone................................... 47 Picture files................................ 26
Call history.................................... 47
 53
G TMC stations....................... 30, 39 Playing audio................................ 27
General information.... 26, 30, 42, 45 Traffic incidents......................... 39 POIs.............................................. 35
Bluetooth................................... 26 Turn list..................................... 39 Presets
DAB........................................... 23 Waypoint trip............................. 35 Retrieving stations..................... 21
Infotainment system.................... 6 Network settings........................... 10 Storing stations......................... 21
Navigation................................. 30 Privacy settings............................ 18
Phone........................................ 45
O Profile settings.............................. 18
Smartphone applications.......... 26 Operation...................................... 47
USB........................................... 26 External devices........................ 26 R
Guidance ..................................... 39 Menu......................................... 14 Radio
Navigation system..................... 31 Activating................................... 21
I Phone........................................ 47 Configuring DAB....................... 23
Infotainment control panel.............. 8 Radio......................................... 21 Configuring RDS....................... 23
DAB announcements................ 23
M P Digital audio broadcasting
Maps............................................. 31 Pairing.......................................... 46 (DAB)........................................ 23
Menu operation............................. 14 Personal settings.......................... 18 Presets...................................... 21
Mobile phones and CB radio Phone Radio data system (RDS)......... 23
equipment ................................ 50 Bluetooth................................... 45 Regional.................................... 23
Mute.............................................. 10 Bluetooth connection................ 46 Regionalisation......................... 23
Call history................................ 47 Retrieving stations..................... 21
N Contacts.................................... 47 Selecting the waveband............ 21
Navigation Entering a number.................... 47 Station search........................... 21
Contacts.................................... 35 Functions during a call.............. 47 Station tuning............................ 21
Current location......................... 31 General information................... 45 Storing stations......................... 21
Destination input....................... 35 Incoming call............................. 47 Usage........................................ 21
Map display............................... 31 Phone book............................... 47 Radio data system ....................... 23
Map manipulation...................... 31 Phone main menu..................... 47 RDS.............................................. 23
Map update............................... 30 Phone book.................................. 47 Regional....................................... 23
Recent destinations.................. 35 Phone projection.......................... 29 Regionalisation............................. 23
Route guidance......................... 39 Picture files................................... 26
54
Retrieving stations........................ 21 Phone........................................ 47
Ring tone...................................... 47 Radio......................................... 21
Ring tone volume...................... 17 USB........................................... 26
Route guidance............................ 39 USB
Connecting device.................... 26
S General information................... 26
Smartphone.................................. 26 USB audio menu....................... 27
Phone projection....................... 29 USB picture menu..................... 28
Speech output volume.................. 17 Using smartphone applications.... 29
Speech recognition....................... 42
Storing stations............................. 21 V
Switching the Infotainment Voice guidance............................. 31
system on.................................. 10 Voice recognition.......................... 42
System settings............................ 18 Volume
Auto volume.............................. 17
T Mute function............................. 10
Theft-deterrent feature ................... 7 Ring tone volume...................... 17
Time Setting the volume.................... 10
adjust......................................... 18 Speech output........................... 17
TMC stations................................ 30 Speed compensated volume.... 17
Tone settings................................ 17 Touch beep volume.................. 17
Touch beep volume...................... 17 Volume settings............................ 17
Traffic incidents............................ 39
Turn list......................................... 39 W
Waveband selection..................... 21
U Waypoint trip................................. 35
Update software........................... 18 Wi-Fi............................................. 10
Usage......................... 10, 21, 31, 43
Bluetooth................................... 26
Menu......................................... 14
Navigation system..................... 31
Multimedia Introduction .................................. 56
Basic operation ............................ 63
Radio ........................................... 68
External devices .......................... 72
Speech recognition ...................... 75
Emergency numbers Phone .......................................... 78
Index ............................................ 84
For emergency service call the Vauxhall 0800 55 33 88 (Free
Incident Manager Linkline)*

Vauxhall Assistance General Enquiries 0845 7565 565

You will need to Vehicle registration Model and colour of

provide: number your Vauxhall

Contact telephone Details of your precise

number location

* Calls may be chargeable from mobile phones

56 Introduction

Introduction General information Important information on

operation and traffic safety
Notice
This manual describes all options
and features available for the 9 Warning
General information ..................... 56
various Infotainment systems.
Theft-deterrent feature ................. 57 Certain descriptions, including those Drive safely at all times. Only
for display and menu functions, may operate the Infotainment system if
Control elements overview .......... 58
not apply to your vehicle due to the traffic conditions allow a safe
Usage .......................................... 60 usage.
model variant, country
specifications, special equipment or In the interest of safety, it might be
accessories. appropriate to stop the vehicle
before operating the Infotainment
Notice
system.
The Infotainment system includes
certain third party software. For the
associated notices, licenses and any 9 Warning
other information regarding this
software see The usage of a navigation app
http://www.psa-peugeot- does not release the driver from
citroen.com/oss. the responsibility for a correct,
vigilant attitude in road traffic.
Always follow the applicable traffic
rules.
 Introduction 57
Radio reception
Radio reception may be disrupted by
static, noise, distortion or loss of
reception due to:
● changes in distance from the
transmitter
● multi-path reception due to
reflection
● shadowing

Theft-deterrent feature
The Infotainment system is equipped
with an electronic security system for
the purpose of theft deterrence.
The Infotainment system therefore
functions only in your vehicle and is
worthless to a thief.
58 Introduction

Control elements overview

Control panel – Multimedia
 Introduction 59
1 ) ........................................... 60 6 a Steering wheel controls
If switched off: switch Open phone menu ................ 80
power on / off
Display phone projection
If switched on: mute system screen when phone
projection is active ................ 74
Turn: adjust volume
7 d
2 Info Display
Open menu for picture
Home menu will be
function ................................. 73
displayed by a 3-finger
touch on screen 8 _
3 h Open vehicle settings
menu, see Owner's Manual
Open climate menu if
available, see Owner's Manual 1 SRC (Source)
4 c Select audio source,
confirm selection with A ...... 60
Display navigation app
when phone projection is Long press: mute system
active ..................................... 74 2 c/d
5 b
Select next / previous
Open audio menu: preset radio station when
radio active ............................ 68
Radio ..................................... 68
or select next / previous
External devices (USB,
track / picture when
Bluetooth) .............................. 72
external devices active ......... 72
60 Introduction
or select next / previous or open call / contacts list ..... 80 Usage
entry in station list, media
list, call / contacts list when If phone call active: open
call in progress menu
Control elements
operation started via
steering wheel controls 7 Y The Infotainment system is operated
via function buttons, a touch screen
Confirm selection with A (with embedded speech and menus that are shown on the
3 A recognition) display.
Short press: activate Inputs are made optionally via:
Confirm selected item
embedded speech recognition ● the control panel on the
or open station list, media list Infotainment system 3 58
Long press: activate
4 e speech recognition in ● the touch screen 3 63
Apple CarPlay™ or ● audio controls on the steering
Activate / deactivate mute
Android™ Auto if phone wheel 3 58
function ................................. 60
connected via USB port ........ 76
5 Y/Z ● the speech recognition 3 75
(without embedded
Turn upwards / speech recognition) Switching the Infotainment
downwards: increase / system on or off
decrease volume Short press: activate
speech recognition in Press ). After switching on, the last
6 6 Apple CarPlay™ or selected Infotainment source
Short press: accept Android™ Auto if phone becomes active.
incoming call connected via USB port Notice
Some functions of the Infotainment
Long press: reject system are only available if ignition
incoming call, hang up call .... 80 is switched on or engine is running.
 Introduction 61
Automatic switch-off Modes of operation Phone
If the Infotainment system has been Before the phone function can be
switched on pressing ) while the Audio-Media used, a connection has to be
ignition is switched off, it will switch off Press b to display the main menu of established between the Infotainment
again automatically when the Eco the last selected audio mode. system and the mobile phone.
mode becomes active. For a detailed description of
preparing and establishing a
Setting the volume Bluetooth connection between the
Turn ). The current setting is shown Infotainment system and a mobile
on the display. phone 3 78.
When the Infotainment system is If the mobile phone is connected,
switched on, the last selected volume press a to display the main menu of
is set. the phone function.

Speed compensated volume

When the speed compensated
volume is activated 3 65, the
volume is adapted automatically to
Changing the media source
make up for the road and wind noise
Select SOURCES to display the
as you drive.
menu for media source selection.
Mute Notice
Press ) to mute the Infotainment For a detailed description of menu
system. operation via touch screen 3 63. For a detailed description of mobile
To cancel the mute function, Select the desired media source. phone operation via the Infotainment
press ) again. The last selected system 3 80.
For a detailed description of:
volume is set again.
● Radio functions 3 68
● External devices 3 73
62 Introduction
Apps
To show specific apps of your
smartphone on the display of the
Infotainment system, connect your
smartphone.
Press a and touch Apple CarPlay or
Android Auto. A menu with different
selectable apps is displayed.
For a detailed description 3 74.
For a detailed description 3 63.
Settings
Press b, select OPTIONS and then Vehicle settings
select Audio settings to display the Select _ to open a menu for various
respective menu. vehicle-related settings.
Vehicle settings are described in the
Owner's Manual.
Settings center
The Settings center provides quick
access to the following settings:
● dark screen
● brightness
● profiles
For a detailed description 3 63. ● system configuration
Touch the top bar z of the screen to ● privacy settings
display a menu for various system- Touch the top bar z of the screen to
related settings. display the Settings center.
 Basic operation 63

Basic operation Basic operation Touch a screen button or menu item.

The corresponding system function is
The display of the Infotainment activated, a message is shown, or a
system has a touch-sensitive surface submenu with further options is
Basic operation ............................ 63 that allows direct interaction with the displayed.
Tone settings ............................... 65 displayed menu controls.
3, & and A / OK screen buttons
Volume settings ........................... 65 When operating the menus, touch
Caution
System settings ........................... 66 3 or & in the respective submenu
Do not use pointed or hard items to return to the next higher menu
like ballpoint pens, pencils or level.
similar for touch screen operation. When no 3 or & screen button is
displayed, you are on the top level of
Menu operation the respective menu.
Selecting or activating a screen On some screens A / OK needs to
button or menu item be touched for confirmation after
selecting menu items or changing
settings. Otherwise all performed
selections or settings will be lost.
64 Basic operation
Scrolling a list ● Touch anywhere on the guiding To switch to the symbol keyboard,
line of the scroll bar. touch 0..#.
● Move the slider of the scroll bar To switch back to the letter keyboard
up and down with your finger. or to switch between capital and small
letters, touch Aa.
Updating a list
To switch the letter keyboard
Touch U to manually update lists, between normal order and
e.g. the station list. alphabetical order, touch M.
Input fields and keyboards To delete the most recently entered
Input fields are indicated by >. character or symbol, touch T.
Touch the input field to open a Adjusting a setting
keyboard for text or number input.
If there are more items available than Depending on the application or
presentable on the screen, the list function currently active, different
must be scrolled. keyboards are displayed.
To scroll through a list of menu items, Keyboards for text input
you may optionally: Keyboards for text input may contain
several input fields. To enable a field
● Place your finger anywhere on for text input, touch it.
the screen and move it upwards
or downwards. To enter a character, touch the
respective screen button. The
Notice character is entered upon release.
Constant pressure must be applied
Touch and hold a letter screen button
and the finger must be moved at a
to display associated letters in a letter
constant speed.
pop-up menu. Release and then
● Touch S or R at the top or select the desired letter.
bottom of the scroll bar.
 Basic operation 65
To adjust a setting like the illustrated Notice You may individually adjust the
example, you may optionally: If you change the settings of a predefined settings.
● Touch P or Q. predefined setting, e.g. Pop-Rock, To define the point in the passenger
this settings will be applied to the compartment where the volume is at
● Touch anywhere on the line. User or Personalised setting. its highest level, move the cursor in
● Move the slider with your finger. the illustration on the right side of the
Balance and fader
screen to the desired point.
Tone settings Select the Balance tab.
To return to the default factory
Press b, select OPTIONS and then settings, select h.
select AUDIO SETTINGS.
Volume settings
Press b, select OPTIONS and then
select AUDIO SETTINGS. Then
select the Sound tab.
Audible touch feedback
If the audible touch feedback function
is activated, each touch of a screen
button or menu item is indicated by a
Several predefined settings are Several predefined settings are beeping sound.
available to optimise the tone for a available to adjust the volume To adjust the touch beep volume,
specific style of music (e.g. Pop- distribution inside the vehicle (e.g. All activate Touch tones and then adjust
Rock or Classical). passengers or Front only). the setting.
To adjust the tone individually, select To change the current setting, e.g. All
User. Change the settings as desired. Speed compensated volume
passengers, select that setting and
then select the desired new setting Activate or deactivate Volume linked
from the displayed list. to speed.
66 Basic operation
If activated, the volume of the Notice
Infotainment system is adapted If the selected display language is
automatically to make up for the road supported by the embedded speech
and wind noise as you drive. recognition, the language of the
speech recognition will be changed
Speech output accordingly; if not, embedded
Select the Voice tab. speech recognition will be not
available.
Adjust the volume for all speech
outputs of the system. Adjusting time and date
Configuring the system Select Date and time.
Ringtone
Select System configuration to To adjust the time and date, select the
Select the Ringtones tab. perform some basic system respective tabs.
Adjust the ringtone volume of configurations, e.g.:
incoming calls. Adjusting the screen
● Adjust the display of units for
temperature or fuel consumption. Select Screen configuration.
System settings ● Reset the system configuration to
factory defaults. Text scroll function
Touch the top bar z of the screen to
Select the Animation tab.
display the Settings center. ● Update the installed software
version. If long texts on the screen should be
The configuration menu is accessible
scrolled automatically, activate
via the Settings center. ● Adjust the privacy settings for Automatic scrolling.
data sharing and vehicle position.
If Automatic scrolling is deactivated,
Changing display language long texts are truncated.
To adjust the language for the menu Adjusting the brightness
texts, select Language and then Select Brightness and set the
select the desired language. brightness of the screen to the
desired level.
 Basic operation 67
Storing your personal settings Finally, confirm your inputs to store
them in your personal profile.
To go to the profile settings, touch the
top bar of the screen z and then Activating your personal profile
select Profiles. Touch the top bar z of the screen,
You can store a multitude of settings then select Profiles and then select
in a personal profile. For example, all the tab with the name of your personal
current tone settings, all radio presets profile.
and a phone book.
Activating the Common profile
In case you share the vehicle with
If a personal profile is currently active:
other people, this enables you to
restore your personal settings from Go to the Common profile tab and
your profile at any time. then select Activate profile.
A maximum of three personal profiles Resetting a personal profile
may be stored. You can at any time reset a personal
Additionally, a Common profile is profile to restore the default factory
available. All settings done at any settings on that profile.
time are automatically stored in that Activate the respective profile and
profile. If no personal profile is then select Reset the profile.
activated, the Common profile is
active. Resetting the Common profile
You can at any time reset the
Storing your personal profile
Common profile to restore the default
After performing all your personal factory settings on that profile.
settings:
Select Common profile and then
Select one of the personal profile select Reset the common profile.
tabs.
Select the input field > and enter the
desired name of your personal profile.
68 Radio

Radio Usage Searching for stations

Activating the radio Automatic station search

Briefly touch P or Q to play the
Press b. The audio main menu last previous or next receivable station.
Usage .......................................... 68
selected is displayed.
Radio data system ....................... 69 Manual station search
If the radio main menu is not active,
Digital audio broadcasting ........... 70 select SOURCES and then select Press and hold P or Q. Release when
Radio. the required frequency has almost
been reached.
A search is made for the next station
that can be received and it is played
automatically.
Station lists
In the station lists, all receivable radio
stations within the current reception
area are available for selection.
To display the station list of the
waveband currently active, select
List.
Select the desired station.
The station last played will be
received. Update station lists
If the stations stored in the waveband-
Selecting a waveband specific station list can no longer be
received, the station lists must be
Select OPTIONS and repeatedly
updated.
touch i to toggle between the
different wavebands. To start an update for the currently
active waveband, select U.
 Radio 69
Storing favourite stations Storing a station from a station list Advantages of RDS
Select OPTIONS and then select the
Up to 24 radio stations of all desired waveband. ● On the display, the programme
wavebands can be stored as name of the station appears
favourites in the Presets list. To store a station from the station list, instead of its frequency.
briefly touch ; next to the desired
Select Presets to display the preset ● During a station search, the
station. The station is stored and the
buttons. Infotainment system tunes in to
number of the preset button will be
RDS stations only.
displayed. To delete a station,
touch ; again. ● The Infotainment system always
tunes into the best receivable
Alternatively, touch and hold the broadcasting frequency of the set
name of the station until it is stored. station by means of AF
To delete the station, touch and hold (alternative frequency).
the name of the station again until a
corresponding message is displayed. ● Depending on the station that is
received, the Infotainment
Retrieving stations system displays radio text that
In the radio main menu select can contain e.g. information on
Storing the currently active station Presets and then briefly touch the the current programme.
Touch and hold the desired button in preset button of the desired station.
the Presets list for a few seconds. The Activating RDS
respective frequency or station name
is displayed on the button. Radio data system In the radio main menu, select
OPTIONS and activate RDS.
If a station is already stored on a Radio data system (RDS) is a service
of FM stations that considerably If RDS is activated, RDS is displayed
preset button, that station will be
facilitates the finding of the desired in the bottom line of the radio main
overwritten by the new one.
station and its fault-free reception. menu.
Alternatively, touch ; Mem in the
radio main menu to store the currently
active station.
70 Radio
Radio text DAB stations are indicated by the ● Interference caused by stations
If RDS is activated, information on the programme name instead of the that are on nearby frequencies (a
radio programme currently active or broadcasting frequency. phenomenon that is typical of AM
the music track currently playing are and FM reception) does not
displayed below the programme General information occur with DAB.
name. ● With DAB, several radio ● If the DAB signal is reflected by
To show or hide the information, go to programmes (services) can be natural obstacles or buildings,
the OPTIONS menu and activate or broadcast on a single ensemble. the reception quality of DAB is
deactivate Information. ● Besides high-quality digital audio improved, whereas AM or FM
services, DAB is also able to reception is considerably
Traffic announcements impaired in such cases.
transmit programme-associated
Many RDS stations broadcast traffic data and a multitude of other data ● When DAB reception is enabled,
news. If the traffic announcements services including travel and the FM tuner of the Infotainment
function is activated, radio or media traffic information. system remains active in the
playback is interrupted for the background and continually
duration of a traffic announcement. ● As long as a given DAB receiver
can pick up the signal sent out by searches for the FM stations with
To activate traffic announcements, go a broadcasting station (even if the best reception. If Traffic
to the OPTIONS menu and activate the signal is very weak), sound announcement 3 69 is activated,
TA. reproduction is ensured. traffic announcements of the FM
If TA is activated, TA is displayed in station with the best reception
● In the event of poor reception, the are issued. Deactivate Traffic
the bottom line of the radio main volume is reduced automatically
menu. announcement if DAB reception
to avoid the output of should not be interrupted by FM
disagreeable noises. traffic announcements.
Digital audio broadcasting If the DAB signal is too weak to
Digital audio broadcasting (DAB) be picked up by the receiver, FM-DAB Linking
broadcasts radio stations digitally. reception is interrupted This function enables switching from
completely. This incident can be an FM station to a corresponding
avoided by activating DAB-FM DAB station and vice versa.
auto tracking, see below.
 Radio 71
Switching from FM to DAB occurs as
soon as a corresponding DAB station
is available. Therefore, it is
recommended to store favourite
stations as DAB stations to reduce
frequent switching.
Switching from DAB to FM occurs if
the signal is too weak to be picked up Deactivation
by the receiver and the corresponding To deactivate FM-DAB Linking, select
FM station is available. OPTIONS in the radio main menu and
then deselect FM-DAB Follow-up.
Notice
After switching, the volume might be FM-DAB Linking will automatically be
different. deactivated when RDS is
deactivated.
Activation
Precondition is that RDS is activated
before FM-DAB Linking can be
activated.
To activate FM-DAB Linking, select
OPTIONS in the radio main menu and
then select FM-DAB Follow-up.
The following symbol will be
displayed when FM-DAB Linking is
activated:
72 External devices

External devices General information Notice

Not all auxiliary devices are
A USB port is located in the centre supported by the Infotainment
console. system.
General information ..................... 72 Caution Connecting / disconnecting a device
Playing audio ............................... 73 Connect one of the devices
Displaying pictures ....................... 73 To protect the system, do not use mentioned above to a USB port. If
a USB hub. required, use the appropriate
Using smartphone applications . . . 74 connection cable. The music function
Notice starts automatically.
The USB ports must always be kept Notice
clean and dry. If a non-readable USB device is
USB ports connected, a corresponding error
message appears and the
An MP3 player, USB device, SD card Infotainment system automatically
(via USB connector / adapter) or switches to the previous function.
smartphone can be connected to the
USB port. To disconnect a USB device, select
another function and then remove the
The Infotainment system can play USB device.
audio files or show picture files
contained in USB devices. Caution
When connected to a USB port,
various functions of the devices Avoid disconnecting the device
mentioned above can be operated via during playback. This may
the controls and menus of the damage the device or the
Infotainment system. Infotainment system.
 External devices 73
Bluetooth audio streaming Press b, select SOURCES and then k: play tracks of currently selected
select the respective source. list (album, artist, etc.) in normal
Streaming allows you to listen to playback mode.
music from your smartphone. Playback of the audio tracks starts
automatically. Repeating tracks
For a detailed description on how to
establish a Bluetooth connection Select OPTIONS and touch the
Playback functions Repeat icon n repeatedly to select
3 79.
Interrupting and resuming playback one of the following options:
If audio playback does not start
Touch 5 to interrupt playback. The n: repeat tracks of currently
automatically, it may be necessary to
start the playback on the smartphone. screen button changes to 4. selected list (album, artist, etc.)
First adjust the volume on your Touch 4 to resume playback. m: repeat tracks of currently
smartphone (to a high level). Then Playing the previous or next track selected list (album, artist, etc.) once
adjust the volume of Infotainment Touch P or Q. l: play tracks of currently selected
system. list (album, artist, etc.) in normal
Fast forwarding and rewinding
playback mode
File formats Touch and hold P or Q. Release to
return to normal playback mode.
The audio equipment supports
Alternatively, you can move the slider Displaying pictures
different file formats.
showing the current track position to You can view pictures stored on a
the left or right. USB device.
Playing audio
Playing tracks randomly Activating the picture viewer
Activating the music function Select OPTIONS and touch the
Random icon repeatedly: Connecting the USB device 3 72.
Connecting the USB or Bluetooth
j: play tracks of currently selected If device already connected, but
device 3 72.
list (album, artist, etc.) in random picture viewer not active:
If device already connected, but order. Press d, select Photos and choose
playback of stored music files not
2: play all tracks stored on the desired folder and picture.
active:
connected device in random order.
74 External devices

Using smartphone If the phone is already connected via

Bluetooth, upon connecting to the
applications USB port and launching Apple
Phone projection CarPlay, the Bluetooth connection
will disconnect. After disconnecting
The phone projection applications the USB connection, the phone will be
Apple CarPlay and Android Auto connected via Bluetooth again.
display selected apps from your Android phone
smartphone on the Info Display and Connect the phone via Bluetooth
allow their operation directly via the 3 79 and then connect the phone to
Infotainment controls.
the USB port 3 72.
Check with the device's manufacturer
Touch the screen to display the menu if this function is compatible with your Starting phone projection
bar. smartphone and if this application is If phone projection is not starting
available in the country you are in. automatically, press a and then
Viewing the previous or next touch Apple CarPlay or
picture Preparing the smartphone Android Auto.
iPhone®: Make sure Siri® is activated
Touch f or g. The phone projection screen
on your phone.
displayed depends on your
Android phone: Download the smartphone and software version.
Starting or stopping a slide show
Android Auto app to your phone from
Select 4 to view the pictures stored the Google Play™ Store. Returning to the Infotainment screen
on the USB device in a slide show. Press, e.g., the b button on the
Connecting the smartphone control panel.
Touch 5 to end the slide show.
iPhone
Connect the phone to the USB port
3 72.
 Speech recognition 75

Speech recognition General information system functions, the speech

recognition does not start until it has
Embedded speech recognition been activated.
The embedded speech recognition of Important information
General information ..................... 75 the Infotainment system enables you Language support
Usage .......................................... 76 to operate various functions of the ● Not all languages available for
Infotainment system via voice input. It the display of the Infotainment
recognises commands and numeric system are also available for the
sequences independently of the speech recognition.
relevant speaker. The commands ● If the display language currently
and numeric sequences can be selected is not supported by the
spoken without a voice pause speech recognition, speech
between the individual words. recognition is not available.
In the event of incorrect operation or In such a case, you need to select
commands, the speech recognition another language for the display
gives visual and / or acoustic if you want to control the
feedback and requests you to re- Infotainment system via voice
enter the desired command. Apart input. To change the display
from this, the speech recognition language 3 66.
acknowledges important commands
and will enquire if necessary. Voice pass-thru application
In general, there are different ways to The voice pass-thru application of the
speak commands for performing the Infotainment system allows access to
desired actions. the speech recognition commands on
Notice your smartphone.
To ensure that conversations inside
the vehicle do not lead to
unintentional triggering of the
76 Speech recognition
Voice pass-through is available via Adjusting the volume of voice Operation via speech commands
the phone projection applications prompts Follow the instructions given by voice
Apple CarPlay and Android Auto Press volume button on the steering output and shown on the display.
3 74. wheel upwards (increase volume) For best results:
Y or downwards (decrease volume)
● Listen for the voice prompt and
Usage Z.
wait for the beep before saying a
Interrupting a voice prompt command or replying.
Embedded speech recognition
As an experienced user, you can ● Read the example commands on
Activating speech recognition interrupt a voice prompt by briefly the display.
Notice pressing Y on the steering wheel. ● The voice prompt can be
Speech recognition is not available Alternatively you can say "Set interrupted by pressing Y again.
during an active phone call. dialogue mode as expert". ● Wait for the beep and then speak
Activation via the Y button on the A beep is heard immediately, and a the command naturally, not too
steering wheel command can be stated without fast, not too slow.
Press Y on the steering wheel. having to wait. Usually commands can be spoken in
a single command.
The audio system mutes, a voice Cancelling a dialogue sequence
output message prompts you to say a To cancel a dialogue sequence and Voice pass-thru application
command, and help menus with the to deactivate the speech recognition,
most important commands currently press 6 on the steering wheel. Activating speech recognition
available are shown on the display. Press (without embedded speech
If you do not say any command for a
The speech recognition is ready for certain period of time, or if you say recognition) or press and hold (with
voice input, after a beep has been commands that are not recognised by embedded speech recognition) Y on
given. the system, a dialogue sequence is the steering wheel until a speech
You can now say a voice command to automatically cancelled. recognition session is started.
initiate a system function (e.g. playing
a preset radio station).
 Speech recognition 77
Adjusting the volume of voice
prompts
Turn ) on the control panel or press
volume button on the steering wheel
upwards (increase volume) Y or
downwards (decrease volume) Z.

Deactivating speech recognition

Press 6 on the steering wheel. The
speech recognition session is ended.
78 Phone

Phone General information Important information for

operation and traffic safety
The phone function provides you with
the possibility of having mobile phone
conversations via a vehicle 9 Warning
General information ..................... 78 microphone and the vehicle
Bluetooth connection ................... 79 loudspeakers as well as operating the Mobile phones have effects on
most important mobile phone your environment. For this reason
Operation ..................................... 80
functions via the Infotainment system safety regulations and directions
Mobile phones and CB radio have been prepared. You should
in the vehicle. To be able to use the
equipment .................................... 82 be familiar with the related
phone function, the mobile phone
must be connected to the directions before you use the
Infotainment system via Bluetooth. telephone function.
Not all phone functions are supported
by every mobile phone. The usable 9 Warning
phone functions depend on the
relevant mobile phone and network Use of the hands-free facility while
provider. You can find further driving can be dangerous because
information on this in the operating your concentration is reduced
instructions for your mobile phone, or when telephoning. Park your
you can enquire about them with your vehicle before you use the hands-
network provider. free facility. Follow the stipulations
of the country in which you find
yourself at present.
Do not forget to follow the special
regulations that apply in specific
areas and always switch off the
mobile phone if the use of mobile
phones is prohibited, if
 Phone 79

interference is caused by the Important information Pairing a new device

mobile phone or if dangerous ● Two paired Bluetooth devices 1. Activate the Bluetooth function of
situations can occur. can be connected to the the Bluetooth device. For further
Infotainment system at the same information, see the operating
Bluetooth time. One device in hands-free instructions for the Bluetooth
mode, the other in audio device.
The phone function is certified by the streaming mode, see description 2. Press a and then touch Bluetooth
Bluetooth Special Interest Group on Bluetooth profile settings search.
(SIG). below.
A search for all Bluetooth devices
You can find further information about However, two devices cannot be in the near environment is
the specification on the internet at used in hands-free mode at the performed.
http://www.bluetooth.com. same time.
3. Select the Bluetooth device you
● Pairing only needs to be carried wish to pair from the displayed list.
Bluetooth connection out once, unless the device is
4. Confirm the pairing procedure:
deleted from the list of paired
Bluetooth is a radio standard for the
devices. If the device has been ● If SSP (secure simple
wireless connection of e.g. mobile
connected previously, the pairing) is supported:
phones, smartphones or other
Infotainment system establishes Confirm the messages on the
devices.
the connection automatically. Infotainment system and the
Pairing a device ● Bluetooth operation considerably Bluetooth device.
drains the device's battery. ● If SSP (secure simple
During the pairing process, PIN code Therefore, connect the device to
exchange between the Bluetooth pairing) is not supported:
the USB port for charging.
device and the Infotainment system On the Infotainment system:
and connection of the Bluetooth a message is displayed
devices to the Infotainment system asking you to enter a PIN
are carried out. code on your Bluetooth
device.
80 Phone
On the Bluetooth device: Activate or deactivate the profile Infotainment system, you can operate
enter the PIN code and settings as desired and confirm your many functions of your mobile phone
confirm your input. settings. via the Infotainment system.
The Infotainment system and Notice
Connecting a paired device
the device are paired. In the hands-free mode, mobile
Devices which are paired but not
5. The phone book is downloaded connected are identified by X. phone operation is still possible, e.g.
automatically to the Infotainment taking a call or adjusting the volume.
system. Depending on the phone, Select the desired device to connect
it. After setup of a connection between
the Infotainment system must be the mobile phone and the
allowed access to the phone Infotainment system, mobile phone
Disconnecting a device
book. If required, confirm the data is transmitted to the Infotainment
messages displayed on the The currently connected device is system. This can take some time
Bluetooth device. identified by W. depending on the mobile phone and
If this function is not supported by Select the device to disconnect it. the amount of data to be transferred.
the Bluetooth device, a During this period, operation of the
corresponding message is Deleting a paired device mobile phone via the Infotainment
displayed. system is possible only to a limited
Touch f in the upper right corner of
extent.
Operations on paired devices the screen to display f icons next to
each paired device. Notice
Press a, select TEL and then select Not every mobile phone fully
Touch f next to the Bluetooth device
Bluetooth connection. supports the phone function.
you want to delete and confirm the Therefore, deviations from the range
A list of all paired devices is displayed message.
displayed. of functions described below are
possible.
Changing the Bluetooth profile Operation Phone main menu
settings As soon as a connection via
Touch % next to the desired paired Bluetooth has been set up between Press a to display the phone main
device. your mobile phone and the menu.
 Phone 81
As soon as figures are entered, To search for a contact via keyboard,
matching entries from the contacts list touch *.
are displayed in alphabetical order. To search for a contact via the first
Touch the desired list entry to initiate letter, touch r and select the
a phone call. desired letter.
Using the contacts list Modifying or deleting a contact
The contacts list contains all phone Select - next to the contact and then
book entries from the connected select the desired option.
Notice Bluetooth device.
Using the call history
The phone main menu is only Select Contacts to see the contacts All incoming, outgoing, or missed
available if a mobile phone is list. calls are registered.
connected to the Infotainment
system via Bluetooth. For a detailed Select Recent calls to see the call
description 3 79. history.
Select the desired list entry to initiate
Many functions of the mobile phone a call.
can now be controlled via the phone
main menu (and associated Incoming phone call
submenus), and via the phone-
specific controls on the steering If an audio mode, e.g. the radio or
wheel. USB mode, is active at the moment a
call comes in, the audio source is
Initiating a phone call Searching for a contact muted and stays muted until the call
The contacts are ordered by the first ends.
Entering a phone number name or surname. To change the
A message with the caller's phone
Enter a phone number using the order, touch OPTIONS and then <.
number or name is displayed.
keypad in the phone main menu. To scroll through the list, touch S or
R.
82 Phone
Notice to do so could invalidate the vehicle
If you leave the vehicle and lock it type approval (EU directive 95/54/
while you are still in a private mode EC).
phone conversation, the Recommendations for fault-free
Infotainment system may remain operation:
switched on until you leave the
Bluetooth reception area of the ● Professionally installed exterior
Infotainment system. antenna to obtain the maximum
range possible
Put incoming calls always on hold ● Maximum transmission power
For safety reasons the phone function 10 W
can put all incoming calls on hold by ● Installation of the phone in a
default. suitable spot, consider relevant
To answer the call, touch w.
To activate this function, select Note in the Owner's Manual,
To reject the call, touch x. OPTIONS and then touch o until the section Airbag system.
To put the call on hold, touch 5. To function is activated. Seek advice on predetermined
resume to the call, touch 4. installation points for the external
antenna or equipment holder and
To mute the microphone of the Mobile phones and CB radio ways of using devices with a
Infotainment system, touch Micro equipment
OFF and 0 will appear. To cancel the transmission power exceeding 10 W.
mute function, press 0 again. Installation instructions and Use of a hands-free attachment
operating guidelines without external antenna with mobile
To continue conversation via the telephone standards GSM
mobile phone (private mode), touch The vehicle specific installation 900/1800/1900 and UMTS is only
t. To reactivate the conversation via instructions and the operating permitted if the maximum
the Infotainment system, touch t guidelines of the mobile phone and transmission power of the mobile
again. hands-free manufacturer must be telephone is 2 W for GSM 900 or
observed when installing and 1 W for the other types.
operating a mobile telephone. Failure
 Phone 83
For reasons of safety, do not use the
phone while driving. Even use of a
hands-free set can be a distraction
while driving.

9 Warning
Operation of radio equipment and
mobile telephones which fail to
meet above mentioned mobile
telephone standards is only
permitted using an antenna
located outside of the vehicle.

Caution
Mobile telephones and radio
equipment may lead to
malfunctions in the vehicle
electronics when operated inside
the vehicle with no exterior
antenna, unless the above
mentioned regulations are
observed.
84

Index A
Activating Bluetooth music........... 73
Control elements
Infotainment system.................. 58
Activating phone........................... 80 Steering wheel.......................... 58
Activating radio............................. 68 Control elements overview........... 58
Activating USB audio.................... 73
Activating USB picture.................. 73
D
Adjust time and date..................... 66 DAB
Audio files..................................... 72 FM-DAB Linking........................ 70
Auto volume.................................. 65 Date
adjust......................................... 66
B Digital audio broadcasting............ 70
Balance......................................... 65 Display
Basic operation............................. 63 adjust brightness....................... 66
Bluetooth change language...................... 66
Bluetooth connection................ 79 Displaying pictures....................... 73
Bluetooth music menu.............. 73 Display settings............................ 73
Connecting device.................... 72
General information................... 72
E
Pairing....................................... 79 Equaliser....................................... 65
Phone........................................ 80 F
Bluetooth connection.................... 79 Factory default settings................ 66
C Fader............................................ 65
Call File formats................................... 72
Functions during a call.............. 80 Audio files.................................. 72
Incoming call............................. 80 Picture files................................ 72
Initiating a phone call................ 80 G
Ring tone................................... 80 General information.......... 72, 75, 78
Call history.................................... 80 Bluetooth................................... 72
Change display language............. 66 DAB........................................... 70
Contacts....................................... 80
 85
Infotainment system.................. 56 General information................... 78 Storing stations......................... 68
Phone........................................ 78 Incoming call............................. 80 Usage........................................ 68
Smartphone applications.......... 72 Phone book............................... 80 Radio data system ....................... 69
USB........................................... 72 Phone main menu..................... 80 RDS.............................................. 69
Phone book.................................. 80 Regional....................................... 69
I Phone projection.......................... 74 Regionalisation............................. 69
Infotainment control panel............ 58 Picture files................................... 72 Retrieving stations........................ 68
M Playing audio................................ 73 Ring tone...................................... 80
Menu operation............................. 63 Presets Ring tone volume...................... 65
Mobile phones and CB radio Retrieving stations..................... 68
Storing stations......................... 68 S
equipment ................................ 82 Smartphone.................................. 72
Mute.............................................. 60 Privacy settings............................ 66
Profile settings.............................. 66 Phone projection....................... 74
O Speech output volume.................. 65
Operation...................................... 80
R Speech recognition....................... 75
External devices........................ 72 Radio Storing stations............................. 68
Menu......................................... 63 Activating................................... 68 Switching the Infotainment
Phone........................................ 80 Configuring DAB....................... 70 system on.................................. 60
Radio......................................... 68 Configuring RDS....................... 69 System settings............................ 66
DAB announcements................ 70
P Digital audio broadcasting T
Pairing.......................................... 79 (DAB)........................................ 70 Theft-deterrent feature ................. 57
Personal settings.......................... 66 Presets...................................... 68 Time
Phone Radio data system (RDS)......... 69 adjust......................................... 66
Bluetooth................................... 78 Regional.................................... 69 Tone settings................................ 65
Bluetooth connection................ 79 Regionalisation......................... 69 Touch beep volume...................... 65
Call history................................ 80 Retrieving stations..................... 68 U
Contacts.................................... 80 Selecting the waveband............ 68 Update software........................... 66
Entering a number.................... 80 Station search........................... 68 Usage............................... 60, 68, 76
Functions during a call.............. 80 Station tuning............................ 68 Bluetooth................................... 72
86
Menu......................................... 63
Phone........................................ 80
Radio......................................... 68
USB........................................... 72
USB
Connecting device.................... 72
General information................... 72
USB audio menu....................... 73
USB picture menu..................... 73
Using smartphone applications.... 74
V
Voice recognition.......................... 75
Volume
Auto volume.............................. 65
Mute function............................. 60
Ring tone volume...................... 65
Setting the volume.................... 60
Speech output........................... 65
Speed compensated volume.... 65
Touch beep volume.................. 65
Volume settings............................ 65
W
Waveband selection..................... 68
Copyright by Vauxhall Motors Ltd.
The information contained in this publication is effective as of the date indicated below. Vauxhall Motors Ltd. reserves the right to make changes to the technical specifications,
features and design of the vehicles relative to the information contained in this publication, as well as changes to the publication itself.
Edition: August 2021, Vauxhall Motors Ltd.
Printed on chlorine-free bleached paper.

ID-VGDAIRIE2108-en

*ID-VGDAIRIE2108-EN*