7

LOCAL AUTHORITY APPROVAL:

GENERAL NOTES:

1. THIS DRAWING IS THE COPYRIGHT OF 'FIRST SQUARE CONSULTANTS

DUBAI, AND MUST NOT BE RETAINED, COPIED OR USED WITHOUT
ABOVE CONSULTANT'S AUTHORITY.
2. ALL DIMENSIONS ARE IN MM AND LEVELS IN MM UNLESS
NOTED OTHERWISE, ALL DIMENSIONS TO BE VERIFIED ON
SITE AND APPROVED BY THE ENGINEER.

3. DIMENSIONS MUST NOT BE SCALED FROM THIS DRAWING.

ROOF LEVEL 4. ALL DIMENSIONS TO BE CHECKED ON SITE AND DISCREPANCIES

REFERRED TO THIS OFFICE FOR DECISION.

+4.65 FFL 5. IN CARRYING OUT WORKS RELATING TO THIS DRAWING, THE

CONTRACTOR IS TO BE RESPONSIBLE FOR COMPLYING WITH THE
FULL REQUIREMENTS OF ALL RELATED LEGISLATION INCLUDING
LOCAL STATUTORY AUTHORITY, SERVICES REGULATIONS AND ALL
SAFETY ACTS (LATEST EDITION).
6. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH OTHER

+4.45 SSL RELEVANT, ARCHITECTURAL, STRUCTURAL, MECHANICAL AND

ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE
SPECIFICATIONS.

KEY PLAN
OUTSIDE

S - SPANDREL
INSIDE
F - FIXED GLASS PANEL

NOTES:

01 2024-11-07
REV. No DATE DESCRIPTION CHECKED

GROUND FLOOR CLIENT:

+0.15 FFL
+0.95 SSL CAPITAL UNITED - L.L.C

01/8M-TSH
INSIDE

PROJECT NAME:

PROPOSED G ONLY PRIVATE

OUTSIDE SECTION B VILLA + SERVICE BLOCK
PLOT NO : 2630916
AL MIZHAR SECOND, DUBAI, UAE.
22

CONSULTANT:

INSIDE

CONTRACTOR:

SECTION A
SECTION C
SUB CONTRACTOR:
OUTSIDE
GENERAL ALUMINUM & GLASS ALOMA CO.

DOOR / WINDOW DOOR / WINDOW TYPE POWDER COATED ALUMINIUM FRAME GLASS PANELS DRAWING DESCRIPTION :

OPENING DOORS SCHEDULE

OPENING TYPE FIXED PANELS AD/02
AW GROUND

02 LOCATION MASTER BATHROOM, BATHROOM 1 & 2

REVISION SHEET NUMBER PROJECT No.

ROOF 01 MZ-ALOMA-SB-ARC-010
ISSUED FOR:

NOTES ALL DIMENSIONS ARE CLEAR ARCHITECTURAL OPENING DIMENSION

TOTAL
 7
LOCAL AUTHORITY APPROVAL:

GENERAL NOTES:

1. THIS DRAWING IS THE COPYRIGHT OF 'FIRST SQUARE CONSULTANTS

DUBAI, AND MUST NOT BE RETAINED, COPIED OR USED WITHOUT
ABOVE CONSULTANT'S AUTHORITY.
2. ALL DIMENSIONS ARE IN MM AND LEVELS IN MM UNLESS
NOTED OTHERWISE, ALL DIMENSIONS TO BE VERIFIED ON
SITE AND APPROVED BY THE ENGINEER.

3. DIMENSIONS MUST NOT BE SCALED FROM THIS DRAWING.

ROOF LEVEL 4. ALL DIMENSIONS TO BE CHECKED ON SITE AND DISCREPANCIES

REFERRED TO THIS OFFICE FOR DECISION.

+4.65 FFL 5. IN CARRYING OUT WORKS RELATING TO THIS DRAWING, THE

CONTRACTOR IS TO BE RESPONSIBLE FOR COMPLYING WITH THE
FULL REQUIREMENTS OF ALL RELATED LEGISLATION INCLUDING
LOCAL STATUTORY AUTHORITY, SERVICES REGULATIONS AND ALL
SAFETY ACTS (LATEST EDITION).
6. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH OTHER
+4.45 SSL RELEVANT, ARCHITECTURAL, STRUCTURAL, MECHANICAL AND
ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE
SPECIFICATIONS.

KEY PLAN
OUTSIDE

S - SPANDREL
INSIDE F - FIXED GLASS PANEL

NOTES:

01 2024-11-07
REV. No DATE DESCRIPTION CHECKED

GROUND FLOOR CLIENT:

+0.15 FFL
+0.95 SSL
CAPITAL UNITED - L.L.C

01/8M-TSH
INSIDE

PROJECT NAME:

PROPOSED G ONLY PRIVATE

OUTSIDE SECTION B VILLA + SERVICE BLOCK
PLOT NO : 2630916
AL MIZHAR SECOND, DUBAI, UAE.
22

CONSULTANT:

INSIDE

CONTRACTOR:

SECTION A
SECTION C
SUB CONTRACTOR:
OUTSIDE
GENERAL ALUMINUM & GLASS ALOMA CO.

DOOR / WINDOW DOOR / WINDOW TYPE POWDER COATED ALUMINIUM FRAME GLASS PANELS DRAWING DESCRIPTION :

OPENING DOORS SCHEDULE

OPENING TYPE FIXED PANELS
AW GROUND AD/02

02* LOCATION MASTER BATHROOM, BATHROOM 1 & 2

REVISION SHEET NUMBER PROJECT No.

ROOF 01 MZ-ALOMA-SB-ARC-010
ISSUED FOR:

NOTES ALL DIMENSIONS ARE CLEAR ARCHITECTURAL OPENING DIMENSION

TOTAL
 LOCAL AUTHORITY APPROVAL:

GENERAL NOTES:

1. THIS DRAWING IS THE COPYRIGHT OF 'FIRST SQUARE CONSULTANTS

DUBAI, AND MUST NOT BE RETAINED, COPIED OR USED WITHOUT
ABOVE CONSULTANT'S AUTHORITY.
2. ALL DIMENSIONS ARE IN MM AND LEVELS IN MM UNLESS
NOTED OTHERWISE, ALL DIMENSIONS TO BE VERIFIED ON
SITE AND APPROVED BY THE ENGINEER.

3. DIMENSIONS MUST NOT BE SCALED FROM THIS DRAWING.

4. ALL DIMENSIONS TO BE CHECKED ON SITE AND DISCREPANCIES
REFERRED TO THIS OFFICE FOR DECISION.

HST-M8/10
5. IN CARRYING OUT WORKS RELATING TO THIS DRAWING, THE
CONTRACTOR IS TO BE RESPONSIBLE FOR COMPLYING WITH THE
FULL REQUIREMENTS OF ALL RELATED LEGISLATION INCLUDING
LOCAL STATUTORY AUTHORITY, SERVICES REGULATIONS AND ALL
INSIDE SAFETY ACTS (LATEST EDITION).
6. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH OTHER
RELEVANT, ARCHITECTURAL, STRUCTURAL, MECHANICAL AND
ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE
SPECIFICATIONS.

KEY PLAN

S - SPANDREL
F - FIXED GLASS PANEL

F NOTES:

GROUND FLOOR
+0.15 FFL 01 2024-11-07
+0.95 SSL REV. No DATE DESCRIPTION CHECKED

01/8M-TSH
CLIENT:

CAPITAL UNITED - L.L.C

PROJECT NAME:
INSIDE
PROPOSED G ONLY PRIVATE
VILLA + SERVICE BLOCK
PLOT NO : 2630916
AL MIZHAR SECOND, DUBAI, UAE.
CONSULTANT:

OUTSIDE

CONTRACTOR:

SECTION A
SUB CONTRACTOR:

GENERAL ALUMINUM & GLASS ALOMA CO.

DOOR / WINDOW DOOR / WINDOW TYPE POWDER COATED ALUMINIUM FRAME GLASS PANELS DRAWING DESCRIPTION :

OPENING DOORS SCHEDULE

OPENING TYPE FIXED PANELS AD/02
AW GROUND
REVISION SHEET NUMBER PROJECT No.
02** LOCATION MASTER BATHROOM, BATHROOM 1 & 2
ROOF 01 MZ-ALOMA-SB-ARC-010
ISSUED FOR:

NOTES ALL DIMENSIONS ARE CLEAR ARCHITECTURAL OPENING DIMENSION

TOTAL
 INSIDE

100MM ALUMINUM MULLION PROFILE

200

INSIDE 52 ALUMINUM BRACKET

100MM ALUMINUM MULLION PROFILE 100 100

LOCAL AUTHORITY APPROVAL:

ALUMINUM CONNECTOR
10 52 GENERAL NOTES:
ALUMINUM BRACKET
1. THIS DRAWING IS THE COPYRIGHT OF 'FIRST SQUARE CONSULTANTS
DUBAI, AND MUST NOT BE RETAINED, COPIED OR USED WITHOUT
38,75 ABOVE CONSULTANT'S AUTHORITY.
2. ALL DIMENSIONS ARE IN MM AND LEVELS IN MM UNLESS
NOTED OTHERWISE, ALL DIMENSIONS TO BE VERIFIED ON
SITE AND APPROVED BY THE ENGINEER.

88

88
M08 ANCHOR BOLT M08 ANCHOR BOLT

100
80 80 3. DIMENSIONS MUST NOT BE SCALED FROM THIS DRAWING.
128 4. ALL DIMENSIONS TO BE CHECKED ON SITE AND DISCREPANCIES
REFERRED TO THIS OFFICE FOR DECISION.

5. IN CARRYING OUT WORKS RELATING TO THIS DRAWING, THE

88

100
CONTRACTOR IS TO BE RESPONSIBLE FOR COMPLYING WITH THE
BACKING SHIM FULL REQUIREMENTS OF ALL RELATED LEGISLATION INCLUDING
LOCAL STATUTORY AUTHORITY, SERVICES REGULATIONS AND ALL
SAFETY ACTS (LATEST EDITION).
6. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH OTHER
200
RELEVANT, ARCHITECTURAL, STRUCTURAL, MECHANICAL AND
6 6 ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE

9
SPECIFICATIONS.

6
KEY PLAN

28

28
16

16
128
6

6
6
PRESSURE PLATE

28
16

15
6
52 OUTSIDE

10 DOUBLE GLASS 28MM

52 JM001-GASKET OUTSIDE S - SPANDREL
F - FIXED GLASS PANEL
6909-GLAZING GASKET
NOTES:
DOUBLE GLASS 28MM MULLION CAP
SPACING GASKET
6906-GLAZING GASKET

MULLION CAP
SPACING GASKET

C-CHANNEL
JM001-GASKET
DETAIL-01 WEATHER SEALANT SILICONE
DETAIL-02

INSIDE ALUMINUM MULLION PROFILE

200
ALUMINUM CONNECTOR
52 10
ALUMINUM BRACKET 01 2024-11-07
REV. No DATE DESCRIPTION CHECKED
CLIENT:

100

HST-M8/10
M08
80 ANCHOR BOLT CAPITAL UNITED - L.L.C
128

10

10

10
88
100

BACKING SHIM M08 35 PROJECT NAME:

80 ANCHOR BOLT

20
2 PROPOSED G ONLY PRIVATE
OUTSIDE VILLA + SERVICE BLOCK

52
PLOT NO : 2630916

54
WEATHER SEALANT SILICONE
AL MIZHAR SECOND, DUBAI, UAE.

6
PRESSURE PLATE

110
128 CONSULTANT:
6
9

ALUMINUM BRACKET
28

16

100 CONTRACTOR:
DOUBLE GLASS 28MM
6

ALUMINUM CONNECTOR MULLION CAP SUB CONTRACTOR:

10
JM001-GASKET 52 88
GENERAL ALUMINUM & GLASS ALOMA CO.

6909-GLAZING GASKET 9069-GLAZING GASKET

DOUBLE GLASS 28MM DRAWING DESCRIPTION :
SPACING GASKET INSIDE
SPACING GASKET
OPENING DOORS SCHEDULE
JM001- GASKET
AD/06
OUTSIDE MULLION CAP

REVISION SHEET NUMBER PROJECT No.

C-CHANNEL C-CHANNEL 01 MZ-ALOMA-SB-ARC-010

WEATHER SEALANT SILICONE ISSUED FOR:

100MM ALUMINUM MULLION PROFILE
DETAIL-03 DETAIL-04 100 8
6 16
28
6
 22 6 16 6

100MM ALUMINUM MULLION PROFILE

1.5MM G.I BACK PANEL

ALUMINUM BRACKET OUTSIDE
JM001-GASKET
INSIDE
100
6/16/6 MM DOUBLE GLASS
WEATHER SEALANT SILICONE SPACING GASKET
88
C-CHANNEL LOCAL AUTHORITY APPROVAL:

GENERAL NOTES:
9069-GLAZING GASKET DROP BEAM
+0.15 FFL 1. THIS DRAWING IS THE COPYRIGHT OF 'FIRST SQUARE CONSULTANTS
DUBAI, AND MUST NOT BE RETAINED, COPIED OR USED WITHOUT
MULLION CAP ABOVE CONSULTANT'S AUTHORITY.
100 2. ALL DIMENSIONS ARE IN MM AND LEVELS IN MM UNLESS
NOTED OTHERWISE, ALL DIMENSIONS TO BE VERIFIED ON
SITE AND APPROVED BY THE ENGINEER.

BACKING SHIM 3. DIMENSIONS MUST NOT BE SCALED FROM THIS DRAWING.

100
4. ALL DIMENSIONS TO BE CHECKED ON SITE AND DISCREPANCIES
REFERRED TO THIS OFFICE FOR DECISION.
FM032-GASKET
5. IN CARRYING OUT WORKS RELATING TO THIS DRAWING, THE
100 CONTRACTOR IS TO BE RESPONSIBLE FOR COMPLYING WITH THE

52
ALUMINUM ANGLE FULL REQUIREMENTS OF ALL RELATED LEGISLATION INCLUDING

54
62

62
LOCAL STATUTORY AUTHORITY, SERVICES REGULATIONS AND ALL
2 SAFETY ACTS (LATEST EDITION).
SCREW 4.8/28M

20
WEATHER SEALANT SILICONE 6. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH OTHER

5
35
RELEVANT, ARCHITECTURAL, STRUCTURAL, MECHANICAL AND
ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE

OUTSIDE SPECIFICATIONS.

10

10
KEY PLAN

52
01/8M-TSH

53
150

6
INSIDE
M08
80 ANCHOR BOLT

88
MULLION CAP
+-0.00 SSL 158
ALUMINUM CONNECTOR 9069-GLAZING GASKET
SPACING GASKET
S - SPANDREL
F - FIXED GLASS PANEL

NOTES:
100MM ALUMINUM MULLION PROFILE
28MM DOUBLE GLASS

DETAIL-05 DETAIL-06 8,6

100 16 6

INSIDE

01 2024-11-07
REV. No DATE DESCRIPTION CHECKED
CLIENT:

40MM ALUMINUM MULLION PROFILE CAPITAL UNITED - L.L.C

22
10

35 PROJECT NAME:
20

C-CHANNEL PROPOSED G ONLY PRIVATE

VILLA + SERVICE BLOCK
SPACING GASKET PLOT NO : 2630916
AL MIZHAR SECOND, DUBAI, UAE.
CONSULTANT:

22
ALUMINUM ANGLE

6
INSIDE OUTSIDE JM008-GLAZING CONTRACTOR:

35

16
6
SPACING GLAZING
2
20

6
MULLION CAP 6909-GLAZING ALUMINUM
10 SUB CONTRACTOR:
MULLION CAP
6906-GLAZING GASKET GENERAL ALUMINUM & GLASS ALOMA CO.

OUTSIDE DRAWING DESCRIPTION :

ALUMINUM ANGLE OPENING DOORS SCHEDULE

AD/06
GASKET C-CHANNEL
22 6 16 6 REVISION SHEET NUMBER PROJECT No.
ALUMINUM MULLION PROFILE
01 MZ-ALOMA-SB-ARC-010
ISSUED FOR:
DETAIL-07 DETAIL-08 SEALANT SILICON
DETAIL-09 DETAIL-30 100MM ALUMINUM MULLION PROFILE
INSIDE

ALUMINUM BRACKET WEATHER SEALANT SILICONE

SLIDING DOOR FRAME GB1103
INSIDE M08
80 ANCHOR BOLT 52 10

LOCAL AUTHORITY APPROVAL:

GENERAL NOTES:

1. THIS DRAWING IS THE COPYRIGHT OF 'FIRST SQUARE CONSULTANTS

DUBAI, AND MUST NOT BE RETAINED, COPIED OR USED WITHOUT
ABOVE CONSULTANT'S AUTHORITY.
126,08
2. ALL DIMENSIONS ARE IN MM AND LEVELS IN MM UNLESS
NOTED OTHERWISE, ALL DIMENSIONS TO BE VERIFIED ON
SITE AND APPROVED BY THE ENGINEER.

3. DIMENSIONS MUST NOT BE SCALED FROM THIS DRAWING.

97,98
88
100
4. ALL DIMENSIONS TO BE CHECKED ON SITE AND DISCREPANCIES
REFERRED TO THIS OFFICE FOR DECISION.

5. IN CARRYING OUT WORKS RELATING TO THIS DRAWING, THE

8
CONTRACTOR IS TO BE RESPONSIBLE FOR COMPLYING WITH THE
FULL REQUIREMENTS OF ALL RELATED LEGISLATION INCLUDING
LOCAL STATUTORY AUTHORITY, SERVICES REGULATIONS AND ALL

30
16
SAFETY ACTS (LATEST EDITION).
6. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH OTHER

6
RELEVANT, ARCHITECTURAL, STRUCTURAL, MECHANICAL AND
10 ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE
SPECIFICATIONS.

6 8,78
6
70,8

2
DOUBLE GLASS 30MM KEY PLAN

35
28

16
20

6
22

GASKET SLIDING DOOR SHUTTER SP0134

6

JM008-GASKET JM001-GASKET
16

6 6

OUTSIDE 6909-GLAZING GASKET

6

6
6

6
S - SPANDREL
DOUBLE GLASS 28MM F - FIXED GLASS PANEL
ALUMINUM ANGLE SPACING GASKET
NOTES:
1.5 MM G.I BACK PANEL
MULLION CAP
28MM DOUBLE GLASS

1.5 MM G.I BACK PANEL OUTSIDE C-CHANNEL

6906-GLAZING GASKET

MULLION CAP
SPACING GASKET

6 16 6
22 1.5MM G.I BACK PANEL

DETAIL-31 DETAIL-32
FLY SCREEN FRAME GY2535
28MM DOUBLE GLASS
ALUMINUM PROFILE 2A00386
37

BRUSH
DROP BEAM
GLASS GASKET 411008 01 2024-11-07
REV. No DATE DESCRIPTION CHECKED
CLIENT:
BACKING SHIM
14

FM032-GASKET CAPITAL UNITED - L.L.C

8

100
30

ALUMINUM ANGLE
16
63

WEATHER SEALANT SILICONE SCREW 4.8/28M PROJECT NAME:

5
PROPOSED G ONLY PRIVATE
OUTSIDE VILLA + SERVICE BLOCK
38

PLOT NO : 2630916
8

INSIDE

52
AL MIZHAR SECOND, DUBAI, UAE.

53
30

16

6
ALUMINUM CONNECTOR CONSULTANT:
6

100MM ALUMINUM MULLION PROFILE

105

10
ALUMINUM SLIDING DOOR FRAME PROFILE MULLION CAP CONTRACTOR:
DOUBLE GLASS 30MM
9069-GLAZING GASKET
DOUBLE GLASS 30MM SPACING GASKET
SUB CONTRACTOR:

R
GENERAL ALUMINUM & GLASS ALOMA CO.
39

DRAWING DESCRIPTION :

ALUMINUM SLIDING DOOR SHUTTER PROFILE

OPENING DOORS SCHEDULE
INTERLOCK PROFILE GB2241 AD/06

REVISION SHEET NUMBER PROJECT No.

30MM DOUBLE GLASS
01 MZ-ALOMA-SB-ARC-010
ISSUED FOR:
8 16 6

30
 INSIDE ALUMINUM MULLION PROFILE

52 10

200
16

LOCAL AUTHORITY APPROVAL:

8

GENERAL NOTES:
30

16

128 1. THIS DRAWING IS THE COPYRIGHT OF 'FIRST SQUARE CONSULTANTS

DUBAI, AND MUST NOT BE RETAINED, COPIED OR USED WITHOUT
82,18

ABOVE CONSULTANT'S AUTHORITY.

6

100 2. ALL DIMENSIONS ARE IN MM AND LEVELS IN MM UNLESS

HST-M8/10
NOTED OTHERWISE, ALL DIMENSIONS TO BE VERIFIED ON
SITE AND APPROVED BY THE ENGINEER.

3. DIMENSIONS MUST NOT BE SCALED FROM THIS DRAWING.

4. ALL DIMENSIONS TO BE CHECKED ON SITE AND DISCREPANCIES

10

10
10
REFERRED TO THIS OFFICE FOR DECISION.

M08
80 ANCHOR BOLT
35 5. IN CARRYING OUT WORKS RELATING TO THIS DRAWING, THE
CONTRACTOR IS TO BE RESPONSIBLE FOR COMPLYING WITH THE

20
2 FULL REQUIREMENTS OF ALL RELATED LEGISLATION INCLUDING
DOUBLE GLASS 30MM LOCAL STATUTORY AUTHORITY, SERVICES REGULATIONS AND ALL
OUTSIDE SAFETY ACTS (LATEST EDITION).
6

52
6. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH OTHER

54
WEATHER SEALANT SILICONE RELEVANT, ARCHITECTURAL, STRUCTURAL, MECHANICAL AND
OUTSIDE

6
ELECTRICAL DRAWINGS AND ALL RELEVANT SECTIONS OF THE
PRESSURE PLATE SPECIFICATIONS.

110
KEY PLAN
ALUMINUM PROFILE SP0204

ALUMINUM BRACKET
100

52
10 DOUBLE GLASS 28MM

6909-GLAZING GASKET
ALUMINUM CONNECTOR MULLION CAP
SPACING GASKET 88

S - SPANDREL
9069-GLAZING GASKET F - FIXED GLASS PANEL
MULLION CAP
NOTES:
INSIDE
SPACING GASKET
C-CHANNEL

WEATHER SEALANT SILICONE JM001- GASKET

DETAIL-33 C-CHANNEL

DETAIL-35 100MM ALUMINUM MULLION PROFILE

30
DETAIL-04 100 8
6 16
28
6

DOUBLE GLASS 30MM

INSIDE

OUTSIDE 01 2024-11-07
REV. No DATE DESCRIPTION CHECKED
CLIENT:

GLASS RUBBER 411008

CAPITAL UNITED - L.L.C

ALUMINUM SLIDING DOOR SHUTTER GB1301

PROJECT NAME:

+0.15 FFL PROPOSED G ONLY PRIVATE

VILLA + SERVICE BLOCK
R

PLOT NO : 2630916
AL MIZHAR SECOND, DUBAI, UAE.

ALUMINUM SLIDING DOOR FRAME CONSULTANT:

40
62

WEATHER SEALANT SILICONE CONTRACTOR:

SUB CONTRACTOR:
150

GENERAL ALUMINUM & GLASS ALOMA CO.

DRAWING DESCRIPTION :

OPENING DOORS SCHEDULE

AD/06

REVISION SHEET NUMBER PROJECT No.

01 MZ-ALOMA-SB-ARC-010
ISSUED FOR: