ELEVATOR

COMPONENTS

More than an elevator supplier ...

POLEN
PERMANENT OVERLOAD CONTROL SYSTEM OVERLOAD SENSORS FOR ROPES / DONUT SENSORS
CHARACTERISTICS OF THE WEIGHTWATCHER SENSOR LS 1 (6 - 16 mm / 1/4 - 5/8 inch) SENSOR LS 2 (4 - 10 mm / 5/32 - 3/8 inch)

Design of the rope load sensor LS1 follows a patented measuring principle ceasing Design of the rope load sensor LS 2 follows a patented measuring principle ceasing
OVERLOAD CONTROL SYSTEM: the expensive calibration of the elevator by test weights. The rope load sensor the expensive calibration of the elevator by test weights. The rope load sensor suits
suits rope diameters from 6 mm (1/4 inch) to 16 mm (5/8 inch) and is ready for use. rope diameters from 4 mm (1/8 inch) to 10 mm (3/8 inch) and is ready for use.

The new AE12wifi allows the entire configuration via TCP/IP or via the setting keys
on the device. The integrated web server allows access to an intuitive user inter- TECHNICAL DATA: TECHNICAL DATA:
face. The 3 known variants (standard, analog and CANopen) have a fast Wifi or Rope diameter 6 mm - 16 mm / 1/4 - 5/8 inch Rope diameter 4 mm - 10 mm / 1/8 - 3/8 inch
LAN connection with the AE12wifi. Application range 0 - 500 kg / 0 - 1100 lbs Application range 0 - 300 kg / 0 - 660 lbs
l 12 independent measuring channels (± 2,5% FSR) (± 2,5% FSR)
Maximum load 1000 kg / 2200 lbs Maximum load 600 kg / 1320 lbs
l 3 alarm relays for freely programmable loads
Breaking load 2000 kg / 4400 lbs Breaking load 1200 kg / 2640 lbs
l 1 alarm relay for slack rope detection and monitoring of load distribution L x W x H (mm) 250 x 75 x 19 L x W x H (mm) 178 x 58 x 16
l Type Analog with 4 - 20 mA or 2 - 10 V Connection cable length 2,5 m Connection cable length 2,5 m
l Type CANopen: DSP 417 (CANopen Lift) Temperature range 0 °C - 70 °C Temperature range 0 °C - 70 °C
l Use of the Henning Sensor Suite Type of protection IP 20 Type of protection IP 20

Automatic compensation of compensating chains / rope weights:

When the HOLD input is switched on, automatic compensation of compensation Typ Nr Art. Typ Nr Art.
chains and rope weights takes place for multiple suspensions.. Rope load sensor LS 1 (6 - 16 mm / 1/4 - 5/8 inch) 455500 Rope load sensor LS 2 (4 - 10 mm / 5/32 inch - 3/8 inch) 455400

ROPE LOAD SENSOR LS 2000 (6 - 16 mm / 1/4 - 5/8 inch) Cabin sensor CC800
Rope load sensor for special use with extended measuring range. The CC cabin sensor is mounted under the cabin. Thanks to the
Inclusive Pre-calibrated for rope diameters - and Measuring ranges. special design and our many years of experience in load measurement
TECHNICAL DATA technology, we have succeeded in developing sensors that measure abso-
AE12wifi AE12wifi Analog AE12wifi CANopen TECHNICAL DATA: lutely. This eliminates the need for time-consuming calibration with weights.
Max. number of sensors 12 12 12
The sensors can therefore be used immediately and simply have to be
Supply voltage 12 - 28 VDC 12 - 28 VDC 12 - 28 VDC Rope diameter 6 mm - 16 mm / 1/4 - 5/8 inch connected to the AE12 evaluation unit without having to enter tedious cali-
Power consumption 4W 4W 4W Application range 200 - 2000 kg / 400 - 4500 lbs bration parameters per sensor or similar. You can choose to use 2 – 12 CC
Relays output 4 4 (± 2,5% FSR) cabin sensors at the same time.
l
Analog output l l l
Maximum load 4000 kg / 9000 lbs

Hold input 12 - 230 VAC/DC 12 - 230 VAC/DC l

Breaking load
LS 20
00
6000 kg / 18000 lbs TECHNICAL DATA:
L x B x H (mm) 300 x 80 x 19
CANopen DSP 417 l l l
Connection cable length 2,5 m Application range 50 - 800 kg (± 2,5% FSR)
Display LED, 4 numbers LED, 4 numbers LED, 4 numbers Limit load 1200 kg
Temperature range 0 °C - 70 °C
Operation 3 keys 3 keys 3 keys Type of protection IP 20 L x W x H (mm) 170 x 40 x 68,5
Determining weight l l l Elastomer NBR hardness 70 (Shore A)
Rope tension assistant l(via Laptop) l(via Laptop) l(via Laptop) Length of connection cable 5m
Configuration with a laptop l(cable required USB) l(cable required USB) l(cable required USB) Temperature range -20°C – +50°C
Dimensions (L x W x H) 105 x 90 x 62 mm 105 x 90 x 62 mm 105 x 90 x 62 mm Protection class IP 20
Nr Art. 455000 455002 455005
Typ Nr Art. Typ Nr Art.
SENSORY DO LIN LS 1 LS2 LS 2000 Donut 300 RC Donut 500 RC Donut 1000 RC Donut 3500 RC CC800

Nr Art.. 455500 455400 455850 455250 455255 455260 455265 455450 Rope load sensor LS 2000 (6 -16 mm)1/4 inch - 5/8 inch 455850 Cabin sensor CC800 455450

Max. eye bolt Ø mm 12,5 (M12) 16,5 (M16) 24,5 (M24) 31,0 (M30)
Max. eye bolt Ø inch 15
/32 inch 5
/8 inch /16inch
15
1 7/32inch

Rope diameter Ø mm 6 - 16 mm 4 - 10 mm 6 - 16 mm ~ 4-8 mm ~ 6-14 mm ~ 12-17 mm ~ 16-25 mm

Rope diameter Ø inch 1
/4- 5/8 inch 5
/32- 3/8 inch /4- 5/8 inch
1
~ 5/32- 5/16 inch ~ 1/4- 9/16 inch ~ 15/32- 11/16 inch ~ 15/32- 11/16 inch
DONUT
Application range kg
Application range lbs
0 - 500 kg
0 - 1100 lbs
0 - 300 kg
0 - 660 lbs
200 - 2000 kg
400 - 4500 lbs
0-300 kg
0 - 660 lbs
0 - 500 kg
0 - 1100 lbs
0 - 1000 kg
0 - 2200 lbs
0 - 3500 kg
0 - 7700 lbs
50 - 80 kg
LOADSENSOR RC:
Principle of measurement strain gauge strain gauge strain gauge strain gauge
Technical data Donut RC Donut 300 Donut 500 Donut 1000 Donut 3500
Calibrated sensors l l l l l l l l
Nr Art. 455250 Nr Art. 455255 Nr Art. 455260 Nr Art. 455265
Calibration with weights l l l l l l l l
Max. eye-bolt Ø 12,5 mm (M12) 16,5 mm (M16) 24,5 mm (M24) 31 mm (M30)
Temperature range 0° - 70°C 0° - 70°C 0° - 70°C 0° - 70°C 0° - 70°C 0° - 70°C 0° - 70°C -20° - 50°C
Cable length 2,5 m 2,5 m 2,5 m 2,5 m 2,5 m 2,5 m 2,5 m 5m Roughly equivalent to rope-Ø 4 - 8 mm 6 - 14 mm 12 - 17 mm 16 - 25 mm

Dimensions (L x W x H) 250 x 75 x 19 mm 178 x 58 x 16 mm 300 x 80 x 19 mm Ø 40 mm Ø 49 mm Ø 65 mm Ø 72,4 mm ZApplication range 0 - 300 kg 0 - 500 kg 0 - 1000 kg 0 - 3500 kg
Maximum load 600 kg 1000 kg 2000 kg 4550 kg
Breaking load 1200 kg 2000 kg 4000 kg 5250 kg
Deflection compensation 10° 7° 5° 5°
l = Standard
l = Not available Sensor Height 52,4 mm 53,8 mm 68 mm 92 mm
Sensor Ø 40 mm 49 mm 65 mm 72,4 mm
Connection cable length 2,5 m 2,5 m 2,5 m 2,5 m
Type protection IP 20 IP 20 IP 20 IP 20
OVERLOAD CONTROL SYSTEM OVERLOAD SENSORS FOR ROPES / DONUT SENSORS
CHARACTERISTICS OF THE WEIGHTWATCHER LIGHT Rope load sensors LS Light are made for low lift shaft heads and narrow-layed
ropes and suit rope diameters of 4 to 13 mm (1/8 - 1/2 inch).
They suit almost every low and narrow siting.
OVERLOAD CONTROL SYSTEM:
TECHNICAL DATA:
l Extremely attractive price
Rope diameter 4 - 13 mm / 1/8 - 1/2 inch
l Easy installation Application range 0 - 500 kg / 0 - 1100 lbs
Maximum load 1000 kg / 2200 lbs
l Very compact sensors Breaking load 2000 kg / 4400 lbs
L x W x H (mm) 110 x 70 x 22
l Freely programmable output relays Cable length 2,5 m
Temperature range 0°C - 70°C
l Possibility of measuring 8, 12 or 16 ropes / belts / braided ropes

Typ Nr Art.
Rope load sensor LS Light 4 - 13 mm / 1/8 - 1/2 inch 456500

AElight 8 AElight 8 AElight 8 AElight 12 AElight 12 AElight 12 AElight 16 AElight 16 AElight 16

Standard CANopen analog Standard CANopen analog Standard CANopen analog

Nr Art. 456100 456105 456102 456010 456015 456012 456000 456005 456002
Max. number of sensors 8 8 8 12 12 12 16 16 16
Supply Voltage 12 – 28 V DC 12 – 28 V DC 12 – 28 V DC 12 – 28 V DC 12 – 28 V DC 12 – 28 V DC 12 – 28 V DC 12 – 28 V DC 12 – 28 V DC
Power Consumptio Max. 0,8 W Max. 0,8 W Max. 0,8 W Max. 0,8 W Max. 0,8 W Max. 0,8 W Max. 0,8 W Max. 0,8 W Max. 0,8 W
Relais 3 Change Over l 3 Change Over 3 Change Over l 3 Change Over 3 Change Over l 3 Change Over
Contacts, freely Contacts, freely Contacts, freely Contacts, freely Contacts, freely Contacts, freely
programmable programmable programmable programmable programmable programmable

Analog Output l l 0 – 10 V DC l l 0 – 10 V DC l l 0 – 10 V DC
CANopen DSP 417 l l l l l l l l l
HOLD Input l l l 12V -230V l 12V -230V 12V -230V l 12V -230V
AC/DC AC/DC AC/DC AC/DC
LED-Display 5 Digits 5 Digits 5 Digits 5 Digits 5 Digits 5 Digits 5 Digits 5 Digits 5 Digits
Operation 3 Push-Button 3 Push-Button 3 Push-Button 3 Push-Button 3 Push-Button 3 Push-Button 3 Push-Button 3 Push-Button 3 Push-Button
Dimensions [mm] (LxBxH) 105 x 90 x 62 105 x 90 x 62 105 x 90 x 62 105 x 90 x 62 105 x 90 x 62 105 x 90 x 62 105 x 90 x 62 105 x 90 x 62 105 x 90 x 62
RC RC RC RC
Sensors
Art.-No.
LS light

456500
Donut light 300 RC Donut light 500 RC Donut light 1000 RC Donut light 3500 RC
300 500 1000 3500
Max. Eye Bolt Diameter Ø mm 12,5 (M12) 16,5 (M16) 24,5 (M24) 31,0 (M30)
15
/32 inch 5
/8 inch 15
/16inch 1 7/32inch
Max. Eye Bolt Diameter Ø inch

Rope Diameter Ø mm 4 - 13 mm ~ 4-8 mm ~ 6-14 mm ~ 12-17 mm ~ 16-25 mm

5
/32- 1/2 inch ~ 5/32- 5/16 inch ~ 1/4- 9/16 inch ~ 15/32- 11/16 inch ~ 15/32- 11/16 inch
Rope Diameter Ø inch
Application Range kg 0 - 500 kg 0-300 kg 0 - 500 kg 0 - 1000 kg 0 - 3500 kg
0 - 1100 lbs 0 - 660 lbs 0 - 1100 lbs 0 - 2200 lbs 0 - 7700 lbs Technical data Donut RC Donut light 300 Donut light 500 Donut light 1000 Donut light 3500
Application Range lbs
Nr Art. 456350 Nr Art. 456355 Nr Art. 456360 Nr Art. 456365
Measuring Principle Strain Gauge Strain Gauge
Max. eye-bolt 0Ø 12,5 mm (M12) 16,5 mm (M16) 24,5 mm (M24) 31 mm (M30)
Calibrated Sensors l l l l l
Roughly equivalent to rope-Ø ~ 4 - 8 mm ~ 6 - 14 mm ~ 12 - 17 mm ~ 16 - 25 mm
Calibration with weights l l l l l
Application range 0 - 300 kg 0 - 500 kg 0 - 1000 kg 0 - 3500 kg
Temperature Range 0° - 70°C 0° - 70°C 0° - 70°C 0° - 70°C 0° - 70°C
Maximum load 600 kg 1000 kg 2000 kg 4550 kg
Connection cable length 2,5 m 2,5 m 2,5 m 2,5 m 2,5 m
Breaking load 1200 kg 2000 kg 4000 kg 5250 kg
Dimensions (L x W x H) 110 x 70 x 22 mm Ø 40 mm Ø 49 mm Ø 65 mm Ø 72,4 mm
Deflection compensation 10° 7° 5° 5°
Sensor Height 52,4 mm 53,8 mm 68 mm 92 mm

l = Standard Sensor Ø 40 mm 49 mm 65 mm 72,4 mm

l = Not available Connection cable length 2,5 m 2,5 m 2,5 m 2,5 m
Type protection IP 20 IP 20 IP 20 IP 20
 MULTIROPE
6 5 4 3 2 1

D D
WEIGHTWATCHER LIGHT MULTIROPE
TECHNICAL DATA: STANDARD
Relays 3 changeover relays
C C
Max. contact voltage 250 V AC/220 V Dc
Max. making current: 30 V DC 1 A
125 V AC 0,3 A
Max. permanent current 30 V DC 1 A

OVERLOAD CONTROL SYSTEM

125 V AC 0,3 A
B B Max. switching capacity (ohmic load) 62 VA
Max. switching capacity (ind. load) 62 VA
Min. contact rating 10 mV DC 0,01 mA
Werkstückkanten DIN 6784
Allgemeintoleranz ISO 2768 - mK
Oberfläche Maßstab: Stückzahl: Length cable set 2.5 m
Typ Nr Art.
DIN ISO

supply voltage 12 V - 28 V DC
(Werkstoff. Halbzeug)
Tolerierung DIN 7167 1302 (Rohteil -Nr.)
(Modell -oder Gesenk -Nr.)
Datum Name Titel:
05.12.2016 Bäcker

Hold-input 12 V - 230 AC/DC

Gezeichnet

A Kontrolliert A
Multirope 150

MultiRope 100 456610

Norm

ADVANTAGES OF WEIGHTWATCHER LIGHT MULTIROPE:

Zeichnungsnummer: Blatt -Nr.
456710 A3
Zust. Änderungen Datum Name

6 5 4 3 2 1
MultiRope 100 CANopen 456615
ELECTRICAL DATA: CANopen
l Extremely attractive value for money option 6 5 4 3 2 1 Length cable set 2.5 m
Supply voltage 12 V - 28 V DC
l Ease of installation D D CANopen Lift DSP 417
l 4 types of sensor for 100, 150, 200 and 300 mm MULTIROPE 100
clamping widths for 4 to 26 mm / 1/8 - 1 inch rope diameters
ELECTRICAL DATA:
l Measuring range up to 10.000 kg / 22.000 lbs
C C
Clamp width 100 mm / 3 15/16 inch
l 3 freely programmable output relays Rope diameter 4 mm - 11 mm / 1/8 - 7/16 inch
Application range 100 kg - 1600 kg / 220 - 3527 lbs
l Integrated evaluation unit Maximum load 1600 kg / 3527 lbs
l CANopen Lift available Dimensions L x W x H 100 mm x 100 mm x 60 mm
Weight ca. 1 kg
B B

MULTIROPE 150
Werkstückkanten DIN 6784
Allgemeintoleranz ISO 2768 - mK
Tolerierung DIN 7167
Oberfläche Maßstab:
DIN ISO
1302
(Werkstoff. Halbzeug)
(Rohteil -Nr.)
Stückzahl: ELECTRICAL DATA:
(Modell -oder Gesenk -Nr.)
Datum Name Titel:

Clamp width 150 mm / 3 29/16 inch

Gezeichnet 05.12.2016 Bäcker

Typ Nr Art.
A Kontrolliert A
Norm Multirope 100
Zeichnungsnummer: Blatt -Nr.
Rope diameter 12 mm - 16 mm / 1/2 - 5/8 inch
Weight Watcher light MultiRope 6 5 4
MultiRope 3150
Zust. Änderungen Datum Name

2
456610
1
A3
456710 Application range 150 kg - 4000 kg / 330 - 8818 lbs
Evaluation Unit MultiRope MultiRope Maximum load 4000 kg / 8818 lbs
MultiRope 150 CANopen 456715
CANopen Dimensions L x W x H 150 mm x 100 mm x 70 mm
Max. Number Of Sensors 1 1 Weight: ca. 1.5 kg
Voltage 12 - 28 VDC 12 - 28 VDC WEIGHTWATCHER LIGHT MULTIROPE
Power Consumption 1 W at 12 V DC 1 W at 12 V DC
Output Relays 3 CO, freely ELECTRICAL DATA: STANDARD
programmable l
Relays 3 changeover relays
Analogue Output l l
Max. contact voltage 250 V AC/220 V Dc
Hold Input 12 - 230 VAC/DC l Max. making current: 30 V DC 1 A
CANopen DSP 417 l l 125 V AC 0,3 A
Max. permanent current 30 V DC 1 A
Display LED, 4 digits LED, 4 digits
125 V AC 0,3 A
Operation 3 keys 3 keys Max. switching capacity (ohmic load) 62 VA
Determination Of Car Weight l l Max. switching capacity (ind. load) 62 VA
Rope Tension Assistant l l Min. contact rating 10 mV DC 0,01 mA
Length cable set 2.5 m
Configuration by laptop l l supply voltage 12 V - 28 V DC
sensor is connected directly sensor is connected directly Hold-input 12 V - 230 AC/DC
to the evaluation unit to the evaluation unit
Suitable Sensors MR 100 MR 150 MR 200 MR 300 ELECTRICAL DATA: CANopen
Nr Art. 456610 456710 456600 456700
Length cable set 2.5 m
456615 CANopen 456715 CANopen 456605 CANopen 456705 CANopen
Supply voltage 12 V - 28 V DC
Rope Diameter Ø mm 4 - 11 mm 12 - 16 mm 4 - 26 mm 4 - 26 mm CANopen Lift DSP 417
Rope Diameter Ø inch 5
/32- 7/16 inch 15
/32- 5/9 inch 5
/32- 1 inch 5
/32- 1 inch
Application Range kg 100 - 1600 kg 150 - 4000 kg 300 - 2500 kg 700 - 6000 kg MULTIROPE 200
Application Range lbs 220 - 3527 lbs 330 - 8818 lbs 660 - 5500 lbs 1500 - 13200 lbs
Measuring Principle Strain Gauge ELECTRICAL DATA:
Calibrated Sensors l l l l
Clamp width 200 mm / 7 7/8 inch
Calibration with weights l l l l
Rope diameter 4 mm - 26 mm / 1/8 - 1 inch
Temperature Range 0° - 70°C 0° - 70°C 0° - 70°C 0° - 70°C Application range 300 kg - 2500 kg / 600 - 5500 lbs
Length Of Cable 2,5 m 2,5 m 2,5 m 2,5 m Max. load 5000 kg / 11000 lbs
Dimensions (L x W x H) 100 x 100 x 60 mm 150 x 100 x 70 mm 220 x 220 x 132 mm 220 x 320 x 142 mm Dimensions L x B x H 220 mm x 220 mm x 132 mm
Weight ca. 3,5 kg

MULTIROPE 300

ELECTRICAL DATA:
Typ Nr Art. Clamp width 300 mm / 11 13/16 inch
MultiRope 200 456600 Rope diameter 4 mm - 26 mm / 1/8 - 1 inch
Application range 700 kg - 6000 kg /1500 - 13200 lbs
MR MR MR MR MultiRope 200 CANopen
MultiRope 300
456605
456700 Max. load
(optional 10000 kg / 22000 lbs)
12000 kg / 26450 lbs

100 150 200 300 MultiRope 300 CANopen 456705 Dimensions L x B x H

Weight:
220 mm x 320 mm x 142 mm
ca. 8,0 kg
MOBILE ROPE LOAD MEASUREMENT MOBILE ROPE LOAD SENSOR
Inadequately set ropes and excessive overall weights cause an MOBILE ROPE LOAD SENSOR MOBILE ROPE LOAD SENSOR
undesired and premature wear. The weight watcher rope load
measuring system allows ropes / belts to be set and lift car and LSM 1 (6 - 16 mm / 1/4 - 5/8 inch) LSM 2 (4 - 10 mm / 5/32 - 3/8 inch)
counterweight loads to be weighed in no time at all.
LSM1 is designed according to a patented measuring principle that does no longer LSM2 is designed according to a patented measuring principle that does no longer
The LSM Belt sensor especially developed for belts allows mea- require any expensive elevator calibration by testing weights. This rope load sensor require any expensive elevator calibration by testing weights. This rope load sen-
suits rope diameters from 6 mm (1/4 inch) to 16 mm (5/8 inch) and can be applied sor suits rope diameters from 4 mm (1/8 inch) to 10 mm (3/8 inch) and can be applied
surements to be carried out on 30 to 60 mm wide belts (3 models straightaway. Its excentric lever allows the sensor to be fitted to the rope within a
straightaway. Its excentric lever allows the sensor to be fitted to the rope within a
available: for Otis, Schindler or CONTI Tech belts). The integrated few seconds. LSM 1 is equipped with a mains cable of 1 m length. few seconds. LSM2 is equipped with a mains cable of 1,0 m length.
rope setting assistant guides you through the rope setting proce-
dure and records every measurement with a report that can later
be printed out on the PC.
TECHNICAL DATA: TECHNICAL DATA:
Rope diameter 6 - 16 mm / /4 - /8 inch
1 5 Rope diameter 4 - 10 mm / 1/8 - 3/8 inch
This makes the mobile weight watcher an optimal tool for your Application range 0 - 500 kg / 0 -1100 lbs (± 2,5% FSR) Application range 0 - 300 kg / 0 - 660 lbs (± 2,5% FSR)
service work. Apart from weighing the lift car and counterweight Maximum load 1000 kg / 2200 lbs Maximum load 600 kg / 1320 lbs
loads, all single rope loads can be displayed and adjusted within Breaking load 2000 kg / 4400 lbs Breaking load 1200 kg / 2640 lbs
a few minutes to their optimum settings using the integrated rope L x W x H (mm) 250 x 75 x 19 L x W x H (mm) 178 x 58 x 16
setting assistant. Cable length 1,0 m / 39.37 inch Cable length 1,0 m / 39.37 inch
Temperature range 0 °C - 70 °C Temperature range 0 °C - 70 °C

MOST IMPORTANT CAPABILITIES OF THE SET CONTAINS:

WEIGHTWATCHER MOBILE DEVICE l 1 MSM 12
l Time-saving adjustment of rope/belt tension l USB connection cable
l Quickly measure the weight of the cabin and counterweight l charging unit 230 V / 110V Typ Nr Art. Typ Nr Art.
l LSM sensors with a mechanism for quick attachment to a rope or belt Mobile Rope Load Sensor LSM 1 (6 - 16 mm / 1/4 - 5/8 inch) 455600 Mobile Rope Load Sensor LSM 2 (4 - 10 mm / 3/16 - 3/8 inch) 455700
l Integrated software for perfect tension setting FEATURES: LSM connection cable extension up to 20 m 455620 LSM connection cable extension up to 20 m 455620
individual ropes/belts l Measurement of single loads and total weight
l For various diameters and types of ropes 4 - 10 mm / 5/32 inch - 3/8 inch, l rope tension assistant / wizard for quick cable adjustment
dia. 6 -16/1/4 inch - 5/8 inch or dia. 9.5 - 24 / 1/4 inch - 5/8 inch mm l Convenient menu with settings of the suspension variant, MOBILE ROPE LOAD SENSOR LSM XL MOBILE ROPE LOAD SENSOR LSM BELT
and belts (30 mm and 60 mm / 1 3/16 - 2 23/64 inch)
l No need to calibrate with weights
unit weight, tolerance (9,5 - 24 mm / 3/8 inch - 15/16 inch )
l Storage of complete documentation
LSM XL is designed according to a patented measuring principle that does no SPECIAL LOAD SENSOR FOR BELTS.
l 12 measurement channels for 12 ropes l Color touch screen for easy operation LSM-Belt is designed according to a patented measuring principle that does no
longer require the expensive elevator calibration by testing weights. This rope load
l Reports can be printed or stored on your computer l Available in many languages (list available on sensor suits rope diameters from 9,5 mm (3/8 inch) to 24 mm (15/16 inch) and can be longer require any expensive elevator calibration by testing weights. This belt sen-
l Basic version 2 GB, optional 4 GB and 8 GB of internal memory request and is constantly expanding) applied straightaway. Its excentric lever allows the sensor to be fitted to the rope sor suits belts from 30 mm to 60 mm of width and can be applied straightaway. Its
l easy touch screen operation l Advanced lithium-ion batteries within a few seconds. It is equipped with a mains cable of 1,5 m length. excentric lever allows the belt sensor to be fitted to the belt within a few seconds. It
l Electric power supply with a modern lithium-ion battery is equipped with a mains cable of 0,8 m length
l Bluetooth variants Extended / Premium can be
l Optional operation via BlueTooth via smartphones/tablets (Android) connected via android app with smartphones / tablets
l Optional with QI fast charging option TECHNICAL DATA: TECHNICAL DATA:
TECHNICAL DATA:
Measuring channels: 12 Rope diameter 9,5 - 24 mm / 3/8 - 15/16 inch Width of belt 30 mm + 60 mm
MOBILE EVALUATION UNIT MSM 12 bandwidth: 30 Hz Application range 200 - 2000 kg / 400 - 4500 lbs (± 2,5% FSR) Application range 0 - 500 kg / 0 - 1100 lbs (± 2,5% FSR)
For sensors LSM 1, LSM 2, LSM XL and LSM Belt sampling frequency: 100 Hz Maximum load 4000 kg / 9000 lbs Maximum load 1000 kg / 2200 lbs
(rope diameter 6 -16 mm / 1/4 - 5/8 inch, 4 -10 mm / 5/32 - 3/8 inch, 9,5 - Breaking load 6000 kg / 18000 lbs Breaking load 2000 kg / 4400 lbs
interfaces: USB, BlueTooth optional L x W x H (mm) 570 x 210 x 50 L x W x H (mm) 230 x 120 x 82
24 mm / 3/8 - 15/16 inch, belt 30 mm i 60 mm / 1 3/16 - 2 23/64 inch) L x W x H (mm): 190 x 138 x 46 Cable length 1,5 m Cable length 0,8 m
Temperature range 0 °C - 70 °C Temperature range 0 °C - 70 °C

MSM 12 Basic Extended Premium

Nr Art. 455105 455106 455107 LSM BELT LSM BELT LSM BELT
OTIS SCHINDLER CONTITech POLYROPE
Memory 2 GB 4 GB 8 GB
Battery capacity 4,5 Ah 6,75 Ah 9 Ah
BlueTooth Class 2 l l l
Qi-charge l l l
More rope load sensors LSM 1, LSM 2, LSM XL or LSM Belt can be ordered separately.

Optional Software-package Nr Art. Typ Nr Art.

Curve storage Measures and stores the rope tensions / individual 455155
Mobile Belt Load Sensor LSM Belt for OTIS (30 mm + 60 mm) 455805
weights during the ride to allow rope sets to be
(recognizable by the blue lever)
optimized later
Counterweight compensation Assistant allowing counterweight compensations to 455160 Mobile Belt Load Sensor LSM Belt for Schindler (30 mm + 60 455806
measuremen be simplified without the use of weights or additional mm) (recognizable by the red lever)
tools, storage and preparation of reports for future Mobile Belt Load Sensor LSM Belt for CONTI Tech Polyrope 455807
documentations (25 mm - 6 x 2.0 DP) (recognizable by the orange lever)

Akcesoria Nr Art. Mobile Belt Load Sensor LSM Belt for CONTI Tech Polyrope 455808
Typ Nr Art. (25 mm - 6 x 2.0) (recognizable by the orange lever)
USB-Stick 455096 (33 mm - 6 x 2.0) (recognizable by the orange lever)
Mobile Rope Load Sensor (9,5 mm - 24 mm / 3/8 - 15/16 inch) 455351
Qi-charge station 455097 LSM connection cable extension up to 1,5 m / 591⁄16 inch 455353
LSM connection cable replacement 1,5 m 455353
MSM12 protective bag 455099 (further extentions on request)
 ideAnalyz er
MOBILNY ANALIZATOR JAZDY MOBILNY MIERNIK
RIDEANALYZER
THE MULTIMETER FOR RIDE PROFILES MOBILE RIDE ANALYZER
Setting assistant for the lift system with automatic evaluation of for the Elevator according To ISO 18738 and GB /T10058-1997
measurements
LiftPC Mobile Diagnosis is a powerful measuring system of modular design, ser-
The RideAnalyzer is a measuring unit with an intuitive operating concept allowing lift ving for mobile and flexible measurements of acceleration and ride quality of ele-
rides to be measured an analysed in a comfortable and fast manner. vators. It is applicable with any laptop in connection with 3D Acceleration Sensor
The easy-to-use unit combines measuring sensors and evaluation unit in one robust QS 3.0 or as a stand-alone solution. Data of acceleration and ride quality of the
plastic casing. There is no need for a connection to a laptop or an external evaluation elevator can precisely be assessed in terms of the standards ISO 18738 and GB/T
unit. 10058-1997. LiftPC Mobile Diagnosis can be applied with rope-traction elevators
Thanks to the automatic evaluation of the measurements it is possible to use the as well as with hydraulically operated elevators.
unit without any lenghty training / instruction and the information needed to adjust or
troubleshoot the lift system is supplied very fast and at low cost.
This makes the RideAnalyzer extremely useful for fitters, planners and experts. It is
the ideal tool for a time-saving adjustment of new systems to check the ride charac-
teristics and the installation and to pinpoint any malfunctions.

Operation

In order to be able to establish the ride characteristics of a lift system using the
RideAnalyzer, the sensor is placed in the middle of the lift car before the ride is Stand - Alone-
started. Operation
As soon as the ride is terminated, a ride profile and other data such as speed and
acceleration profiles are available.
These results are immediately evaluated on the basis of specified parameters so that
any required system setting corrections can be initiated at short notice.

Application Technical Data

l Documentation of the ride profile Measuring axes x, y, z
l Setting the correct ride parameters Measuring range +- 2.0 g
l Measuring the acceleration, deceleration, jerk and speed Samplerate 200 Hz
Resolution 1 mg Application
l Troubleshooting in case of malfunctions l internal memory
Temperature range 0 to 60°C
Measurement features Resistance to shocks 10 g l built in Bluetooth connection
l Acceleration and deceleration behaviour in x, y, z axis Data interface/ load function USB l android app
Measurement without additional equipment yes l QI-charging
l Jerks and vibrations of the lift car
Measurement memory yes
l Measurement of the ride profile Range of Application
User interface touch display
Power supply lithium-ion battery l Documentation of the quality supplied by pre-post comparison Characteristics of 3D-Acceleration Sensor QS 3
Evaluation features
l Service and maintenance of the status quo Impact resistant up to 6.000 g
l Documents speed, acceleration, deceleration and jerk on the spot Scope of supply: Range of ambient temperatures from - 20 °C to + 60 °C
l Automatic evaluation of measurements l Specific reaction to arising malfunctions
l RideAnalyzer Interfaces to USB 1.1 and Bluetooth
l Graphical illustration of the driving profile in x,y,z l Preparation of putting into operation and acceptance tests by the authorities
l USB cable Module / Handheld terminal HT 1.0
l Provides data on ride profile l Bag Measuring Characteristics Accuracy +/- 2 g application range per axis
l Provides information on the location inside the shaft where a l Acceleration and deceleration behaviour in all 3 axis Special feature electronic self-check function
malfunction occurs l Stubbing and joggling of the car and at the guide rails
l Adjustment of individual limit values l Recognizing door movements
l Makes out a report
l Stores measurements in files for import into the Henning Sensor Suite
Evaluation Characteristics
l Documentation of all important data concerning travel acceleration and ride Typ Nr Art.
l Easy and intuitive operation
l Hints to irregularities with doors, guide rails and driving speed control mobile Diagnosis 450010
l Provides exact information of where the malfunction is to be spotted
Mini measuring-block stainless steel 450016
Design Characteristics
l 3D acceleration sensor for online measuring in all 3 axis
l Pre-calibrated in our factory
l On-the-spot evaluation of the data measured by guided software
l Usage of common evaluation procedures such as filtering attenuation,
peaktopeak evaluation as well as frequency analysis up to 3000 cycles per
second,sampling rate up to 6000 cycles per second
l Suitable for all kinds of elevators
l System-integrated monitoring of the measuring instruments
Typ Nr Art.
RideAnalyzer 450450
Ersatztasche für RideAnalyzer 450452
 Statistics & Analysis

CONDITION MONITORING SYSTEM

FOR PREDICTIVE MAINTENANCE
The WEARwatcher is an acceleration sensor combined with an integrated ana-
lysis unit. This drives condition monitoring of the most important physical para-
Send message meters of the elevator/lift. Problems and abnormalities are detected by WEAR-
watcher before they negatively influence the elevator/lift system.

Thanks to the condition-oriented assessment, the use of a technician often be-

comes necessary only if corresponding indications are present.

April 2017
24. April - 28. April 2017

Smart Lift Monitoring

l Data for usage-based preventive maintenance
l Fault detection/system downtime (availability, etc.)
l Wear detection through trend monitoring
l Automated reporting at freely selectable intervals
l Data-based recommendations for action
l Data-based decision support for end customers
l “Special reports” (forensics)
Record actual condition Analyse and assess Report & recommendation
Notification
The WEARwatcher enables predictive maintenance As a real computing device, the WEARwatcher For monitoring medium- and large-sized invento-
of a lift and can be used, independent of the cont- analyses recorded data in an in-depth manner, ries of lift systems, Henning WEARwatcher cloud
rol system and manufacturer, on lifts of every age. on site, on the elevator and sends the results in generates monthly reports, which enable easy
Thanks to our long-standing experience in the lift form of notifications, alarms, trends and condition and efficient assessment and a ready display of
measurement technology, we have been developing changes to the Henning WEARwatcher cloud. The- recommended and needed actions.a
trendsetting algorithms, which automatically record re, this data is further analysed by the use of artificial
and assess the state of lifts, make it possible to plan intelligence and self-learning
service calls in advance and to optimise them. algorithms.

Features Features

Breakdown Breakdown
Ø Speed Guides Ø Speed
probability probability

At a glance At a glance
Duty cycles Ride quality Drive Duty cycles Ride quality
• Modularly expandable • Easy installation (< 30 min)
• Numerous sensors available • Breakdown Probability
• Breakdown Probability • Increase availability Ride distance Ride distance
Ø Number of rides Ø Number of rides
• Increase availability • Prevention of defects
• Prevention of defects • Minimizing downtime
• Minimizing downtime • Precise predictable maintenance Emergency stop
Twisted ropes analysis
• Precise predictable maintenance • Increasing the service life of components
• Increasing the service life of components • Control-system independent
• Control-system independent • Boost in service quality Door reversion
• Boost in service quality • Usage-based preventive maintenance Door cycles UCM warnings Hoistway doors Car doors
detection
• Usage-based preventive maintenance • Automated reporting
• Automated reporting • Fault detection/availability
• Fault detection/availability • Cybersecurity Levelling precision Sheaves wear Drive
• Cybersecurity

Hoistway doors Car doors Grooves Guides

Emergency stop
Wear of ropes analysis
PERFORMANCE LIFTBUFFER A

E
A P
P B Henning Performance Liftbuffer HPL / HPM

B
A
For elevators up to 2.5 m/s rated speed to EN 81
LP 50
For elevators up to 5.1 m/s rated speed according to EN 81
Dimensions type HPL / HPM*): H
S

A
S L A B C D E F G P

S
Dimensions type LP 50*):
E

HPL 40 x 80 80 305
L

D S L N A B C D E F G P H I
HPL 40 x 120 120 385 I
160 120 20 18 91 115
HPL 40 x 175 175 495 LP 50 x 4252) 425 1065 640

L
HPM 40 x 275 275 715 LP 50 x 6952) 695 1665 970 200 160 20 18 135 155 150 100
F HPM 40 x 430 430 1122 LP 50 x 950 2)
950 2235 1285
LP 50 x 11501) 1150 2695 1511
200 160 20 18 135 152 148 100 270 240
D Application data type HPL / HPM LP 50 x 17601) 1760 4215 2421
F 1)
Buffer may only be operated with fixed support fange.
Type Stroke s rated speed v impact mass max. impact speed weight with oil Article-No 2)
Buffers are supplied without support flange
[mm] [m/s] min. - max. m [m/s] filling G [kg]
C

[kg]
N
HPL 40 x 80 80 1,0 450 - 3500 1,15 12 241080
Application data type LP 50:
HPL 40 x 120 120 1,3 450 - 3500 1,495 13 241120 Typ/Type stroke rated speed v impact mass impact max. weight with Article-No
s [mm] [m/s] min. - max. m energy E Puffer- oil filling G
HPL 40 x 175 175 1,6 450 - 3500 1,84 14 241175
[kg] [kNm] kraft/buf- [kg]
HPM 40 x 275 275 2,0 450 - 3500 2,3 17 241275 fer force
D F [kN]
HPM 40 x 430 430 2,5 450 - 3500 2875 22 241430
LP 50 x 425 425 2,5 500 - 4500 37,4 130 47 250425

*) All dimensions in mm. Modifications reserved! Ambient temperatures for the standard design: -10 °C up to + 50 °C. LP 50 x 695 695 3,2 500 - 4500 61,1 130 68 250695

C
Other temperatures on request.
LP 50 x 950 950 3,7 500 - 4500 83,5 130 86 250950

LP 50 x 1150 950 4,1 750 - 4500 92,5 130 110 251150

LP 50 x 1760 950 5,1 750 - 4500 142,2 130 200 251760

Features of the Henning lift buffers: Hydraulic oils and allowed ambient temperatures during *) All dimensions in mm. Modifications reserved! Ambient temperatures for the standard design: -10 °C up to + 50 °C. Other temperatures on
operation: request.

l Certified to DIN EN-81-20:2020, EN-81-50:2020 5.5; conformity with

a) Standard model:
LD 2014/33/EU
Hydraulic oil. For ambient temperatures from -10 °C up to +50 °C
l Certification according to UKCA, EAC, TSG and UA partly available b) Low temperature design (upon request):
l Made in Germany For ambient temperatures from -30 °C up to +40 °C
l Meets the demands of the modern elevator market c) Special designs with biodegradable or flame-retardant hydraulic
l Robust, durable and lightweight design fluids (on request):
l Wide combination of mass ranges and rate speeds available Various special fluids are tested for the hydraulic liftbuffer and released
l Convenient installation for use. Please note the special marking of the buffer and the additional inserts
l Pre-filled with oil for order documentation in the individual case!
l Type HPL/HPM return to ready position by spring
l Type LP return to ready position by integrated gas spring
l Mechanical safety switch triggered by the striker
l All documentation/certificates available on our website
l Protection class IP67
 Smart elevator technology.

Download complete
Henning catalog

Henning GmbH & Co. KG

Loher Straße 4
58332 Schwelm (Germany)
Tel.: +49 2336 9298-0
Fax: +49 2336 9298-100
Version 07/2024

info@henning-gmbh.de

www.henning-gmbh.de