Scribd
Upload
10 views1 page

Hot Work Permit

This document outlines the mandatory work permit procedure for hot work, including welding and gas cutting, which is required for contractors. It details the necessary safety checks, hazard identifications, personal protective equipment (PPE) requirements, and contractor responsibilities. The permit must be closed after work completion, ensuring all safety protocols and waste disposal regulations are followed.

Uploaded by

prwankhede79
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
10 views1 page

Hot Work Permit

This document outlines the mandatory work permit procedure for hot work, including welding and gas cutting, which is required for contractors. It details the necessary safety checks, hazard identifications, personal protective equipment (PPE) requirements, and contractor responsibilities. The permit must be closed after work completion, ensuring all safety protocols and waste disposal regulations are followed.

Uploaded by

prwankhede79
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Form No / REV

F/PA/22, 00
No
WORK PERMIT FOR HOT WORK Porcedure No SPR-02
Effec. Date 11.05.2018
Put wherever Applicable
This permit is Mandatory for all contractors such as welding/gas cutting work
New permit Permit extension Permit No.
Location of Work :
Permit Issue Date and Time :
Contractor's Name :
No of employees : Permit Closing date and Time

Nature of work :

Identify the hazards & risks in the work ( Write Yes/ No ) Safety Checks/Guide line for this particular work
All movable combustible/flammable gases are
Risk of falling from height :
removed from the vicinity.
Ensure proper electrical connection with
Foot injuries possible: earthling.(earthling should be given direct to
job )
Chance of eye injuries due to
Equipment isolation instrumentally
UV/infrared radiation
Hand injuries possible: Equipment is de energised
Welding M/C cables, plug and holder must be
Chance of Burn injuries :
in good condition.
Welding M/C should be inspected and tagged
Chances of fire :
by EPPL Electrical dept.
Gas cylinders to be kept on trolley, secured
Chances of Suffocation
with chain.
Install pressure regulator(ISI Mark) with two
guages.also flash back arrestor required for
regulator end and starting of torch.
Only commercial LPG cylinder should be
used with regulator.
PPE for this particular work

Safety Helmet Safety goggles

Face Mask Safety shoes


Lather Apron ,lather hand gloves, lather leg
Hand gloves guard. Welding glass/face shield-(DIN-11
Shade)
1 Is the risk & hazards explained to contractor
2 Is the emergency response plan made known to contractor
3 Is the EHS requirements made known to contractor
4 Availability of fire extinguishers ; first aid boxes made known to contractor.
Declaration by the contractor
I have understood the EHS requirement of EPPL, I will follow the instruction given to me and I will take the responsibility to safe working in
EPPL site.
Contractor : Permit initiated by : Dept Head EHS / HR Dept.

Permit closing
After Completion of work permit should be closed
I certify that I have completed the work specified in this permit. All my workmen and equipment have been removed from vicinity of the above
work and all genrated waste are disposed in proper manner as per hazardous waste rule

Contractor : Permit initiator Dept Head EHS / HR Dept.

You might also like