T R A C TO R S / 4 2 4
424
MULTI-PURPOSE
COMPACT TRACTOR
FEATURES
REDESIGNED OPERATOR
STATION WITH
COMFORT SEAT
CAST IRON TRANSMISSION
AND FRONT AXLE AND DUAL
HYDRAULIC PUMP
Tough terrain needs a tougher tractor. TWO SIDE-BY-SIDE
HYDROSTATIC
TRANSMISSION PEDALS
Designed for properties that have challenging terrain, the new YANMAR 424 has a higher
ground clearance and is incredibly stable under tough conditions. Powered by YANMAR’s FULL-FRAME CHASSIS
renowned 3-cylinder, liquid-cooled diesel engine you get a unique combination of power and
fuel efficiency. Its performance is complemented by an all-new operator’s platform that was ELECTRO HYDRO
designed with you in mind. The 424 is easier to climb on and off, features a more comfortable INDEPENDENT PTO WITH
ONE-TOUCH ON/OFF
seat position and puts every instrument and control at your fingertips. It’s a tough tractor
designed to do a tough job.
FRONT-END LOADER
CAPACITY + QUICK HITCH
INNOVATIVE DESIGN AND TECHNOLOGY
SMOOTH, HYDRAULIC
POWER STEERING
COVER THE TOUGHER TERRITORY.
The 424 is outfitted with a larger, more aggressive tire package. This makes
for a tractor with increased ground clearance and greater operational stability
over challenging terrain. It means you can get on board and operate in the
toughest of territory with complete comfort and confidence. And with this
increased operating confidence, you’ll be able to get even more out of what
your land has to offer. Not bad, huh?
SIMPLY PUT, LIFT MORE.
The pure power of the 424 means the front loader can lift a category
leading 1,200 lbs of anything you wish to lift. That’s power usually
associated with much larger tractors. But that’s YANMAR’s strength.
Powered by fuel-efficient diesel engines that let you do more. And the
last time we checked, more is good.
PRECISE REAR IMPLEMENT CONTROL.
Making sure your rear implements operate in a position that’s always
repeatable means your tasks get done quickly and more accurately. And
that’s what YANMAR’s unique True Position Control delivers. An easy-
to-reach control lever controls the rear implements operating height and
makes sure it’s always right where you need it. Makes for easy operation.
And it takes better care of your land. Everyone likes that.
YANMAR 424 Tractor Specifications
ENGINE YANMAR YL210 CURVED BOOM LOADER SPECIFICATIONS
Maker YANMAR Maximum Lift Height to Pivot Pin in. (mm) 79 (2,000)
Model 3TNV80F Maximum Lift Height Under Level Bucket in (mm) 58 (1,465)
Type 4 Cycle Inline, Water Cooled Diesel Reach at Maximum Lift Height in. (mm) 36 (920)
Number of Cylinders 3 Reach with Bucket on Ground in (mm) 53 (1,355)
Bore and Stroke in. (mm) 3.15x3.30 (80x84) Digging Depth in. (mm) 3.9 (100)
Total Displacement cu. In. (L) 77.2 (1.266) Maximum Drop Angle degree 45
Gross Power: EPA Regulation HP (kW) 23.9 (17.8) Maximum Rollback Angle degree 30
Net Power HP (kW) 21.7 (16.2) Lift Capacity (Pivot Pin) lb. (kg) 1,199 (545)
Rated Revolution RPM 3,200 Breakout Force (Pivot Pin) lb. (kg) 2,090 (950)
Maximum Torque ft.lbs. (Nm) 45.7 (62.0) Rollback Force (Ground Line) lb. (kg) 1,518 (690)
Battery 540 CCA Rated Flow GPM (L/m) 4.3 (16.1)
Fuel Diesel System Pressure psi (MPa) 2,429 (16.7)
Rising Time to Full Height w/o Load sec. 3.7
CAPACITIES Lowering Time w/o Load sec 2.3
Fuel Tank US gal (L) 6.1 (23.0) Attachment Rollback Time sec. 2.3
Engine Oil US qt. (L) 3.6 (3.4) Attachment Dumping Time (REGEN) sec. 1.6
Engine Coolant US qt. (L) 3.0 (2.8) Bucket Width in. (mm) 53 (1,346)
Transmission Oil US gal (L) 4.1 (15.5) Bucket Capacity cu ft. (m3) 5.65 (0.16)
Front Axle Oil US gal (L) 3.7 (3.5) Bucket Weight lb. (kg) 145 (66)
Loader weight with bucket Ib. (kg) 508 (231)
DIMENSIONS in. (mm)
Overall Length (with 3-Point Hitch) 105.8 (2,688)
YANMAR B65 BACKHOE SPECIFICATIONS
Overall Width (with R4 Tires) 54.1 (1,373)
Overall Height (with Roll-Over Protection (ROPS) and R4 Tires 87.2 (2,215) Maximum Digging Depth in. (mm) 76 (1,930)
Overall Height (with Folded ROPS, R4 Tires, Top Of Steering Wheel) 71.8 (1,824) SwingArc 150 degrees
Overall Height (with R4 Tires, Top Of Steering Wheel) 56.7 (1,440) Loading Height (bucket at 60 deg) in. (mm) 62.4 (1,585)
Wheel Base 63.0 (1,600) Reach from Center Line of Swing Pivot in. (mm) 102 (2,591)
Minimum Ground Clearance (with R4 Tires) 9.9 (249) Bucket Rotation 180 degrees
Tread (with R4) Front: 37.8 (960), Rear: 40.5 (1,029) Loading Reach (bucket at 60 deg) in. (mm) 35 (889)
Transport Overhang in. (mm) 42.4 (1,077)
WEIGHT lb. (kg) Undercut in. (mm) 25 (635)
(with ROPS, R4 Tires) 1,830 (830) Stabilizer Spread, down position in. (mm) 85.4 (2,169)
Stabilizer Spread, up position in. (mm) 52.6 (1,336)
TRAVELING SYSTEM Bucket Cylinder Digging Force lbs. (kg) 2,800 (1,270)
Tires Ag (R1) Front, Rear: - Dipperstick Cylinder Digging Force lbs. (kg) 1,590 (721)
Turf (R3) Front: 24x8.50-14 4PR, Rear: 36x14.00-15 4PR Operating Pressure psi (kg/cm) 2,030 (142.7)
Industrial (R4) Front: 23x8.50-12 4PR, Rear: 14-17.5 6PR Backhoe weight Ib. (kg) 677 (307)
Clutch -
Steering Hydrostatic Power YANMAR M60 MID-MOUNT MOWER SPECIFICATIONS
Transmission Hydrostatic Transmission, Dual Range Speeds Mounting Method Ground Following
Drive Selected 4WD Cutting Width in. (mm) 60 (1,524)
Brake Wet Disk Cutting Height in. (mm) 1-4 (25.4-101.6)
Minimum Turning Radius ft. (m) 8.5 (2.6) Number of Blades 3
Weight Ib. (kg) 363 (142)
HYDRAULIC UNIT
Hydraulic Control System Position Control, Open Center
Pump Capacity (main) US gal/min. (L/min) 4.3 (16.1) AVAILABLE ATTACHMENTS FOR THE YANMAR 424
Pump Capacity (steering) US gal/min. (L/min) 3.7 (14.1) Front End Loader Front Blade 3 Pt Attachments
3-Point Hitch Limited Category 1 Backhoe Snow Blower
Maximum Lift Force Lift Point lb. (kg) - Mid-Mount Mower Front Broom
24 in. Behind Lift Point lb. (kg) 1,209 (548)
Note: Attachments sold separately. Please see your dealer for details.
System Pressure psi (MPa) 2,429 (16.7)
©2019 YANMAR America Corporation. YT19-139 (9/19)
POWER TAKE OFF (PTO) ASSEMBLED IN THE USA
Power Take Off (PTO) Power HP (kW) 18.1 (13.5) All YANMAR tractors are assembled in our state-of-the-art facility
Type Hydraulic Clutch in Adairsville, GA, just north of Atlanta. Replacement parts are
quickly fulfilled from this location to anywhere in North America.
Rear Shaft Size 35 mm OD, 6 Splines Plus, a ten-year limited powertrain warranty is standard on all
Type Independent new tractor purchases.
Speed/Engine RPM 554/3,200
Mid Shaft Size SAE16/32, 15 Splines DEALERS WHO SHARE OUR COMMITMENT
Type Independent YANMAR tractors are sold and serviced by a network of dealers
Speed/Engine RPM 2,057/3,200 who are committed to serving the communities in which they live
and work. They share our passion for the land as well as a passion
for unsurpassed service. To find the dealer nearest you, please
TRAVELING SPEEDS visit YanmarTractor.com.
Forward mph (km/h) Low: 0-6.3 (0-10.0), High: 0-13.1 (0-21.0)
Reverse mph (km/h) Low: 0-4.3 (0-7.0), High: 0-9.1 (0-14.7)
To learn more or to find a dealer nearest you,
please visit YanmarTractor.com.
