| 415 W

Commercial Solar Panel

SunPower Performance Panels wrap front contact cells with 30+ years of SunPower
materials and manufacturing expertise. The weakest points of Conventional Panel
design are eliminated to deliver superior power, reliability, value and savings.1

High Power
Enhanced active area and mono PERC cells optimize power density,
while lowering system costs.

High Performance
Up to 27% more energy in the same space over 25 years.2 Unique
parallel circuitry maximizes energy production during morning and
evening row-to-row shading, or when panels become soiled.
Conventional Panels Performance Panels
Reduced Soiling
NEW drainage notch
improves performance

Shade or soiling Shade or soiling

High Reliability
Engineered for SunPower Performance Panels are the most
Performance deployed shingled solar panel in the world.3
Innovative cell shingling mitigates the leading
reliability challenges associated with conventional
front contact panels by designing out fragile ribbons
and solder bonds on the cells. SunPower stands
behind its panels with its industry-leading Complete
Confidence Warranty. SunPower’s Performance Line
is warranted to produce more than 97.5% power in
the first year, then declining by 0.5% per year, ending
at 85.5% power after 25 years.
 Robust and flexible cell connection
technology. Outstanding reliability. 25 Year Combined Warranty
Product Warranty Length
 Conductive adhesive, proven in the
aerospace industry.
SunPower Performance Panels
 Redundant cell to cell connections.

 Reduced panel temperature due to

Conventional Panels
unique electrical bussing.

0 5 10 15 20 25
Years

sunpower.com.au
 | P3-415-COM-1500 Commercial Solar Panel

Electrical Data
Model SPR-P3-415-COM-1500 SPR-P3-410-COM-1500 SPR-P3-405-COM-1500 SPR-P3-400-COM-1500
4
Nominal Power (Pnom) 415 W 410 W 405 W 400 W
Power Tolerance +5/–0% +5/–0% +5/–0% +5/–0%
Efficiency 20.1% 19.9% 19.6% 19.4%
Rated Voltage (Vmpp) 45.0 V 44.5 V 44.0 V 43.7 V
Rated Current (Impp) 9.22 A 9.21 A 9.20 A 9.16 A
Open-Circuit Voltage (Voc) 54.1 V 53.9 V 53.3 V 52.6 V
Short-Circuit Current (Isc) 9.90 A 9.89 A 9.88 A 9.83 A
Maximum System Voltage 1500 V IEC
Maximum Series Fuse 18 A
Power Temp. Coef. −0.36% / °C
Voltage Temp. Coef. −0.29% / °C
Current Temp. Coef. 0.05% / °C

Tests And Certifications (Pending) Operating Condition And Mechanical Data

Standard Tests5 IEC 61215, IEC 61730 Rated to 1500 V Temperature –40°C to +85°C
Quality Certs ISO 9001:2008, ISO 14001:2004 Impact Resistance 25 mm diameter hail at 23 m/s
EHS Compliance OHSAS 18001:2007, Recycling Scheme Solar Cells Monocrystalline PERC
Ammonia Test IEC 62716 Tempered Glass High-transmission tempered anti-reflective
Desert Test MIL-STD-810G Junction Box IP-68, Zerun (Z4S-ab4De), 3 bypass diodes
Salt Spray Test IEC 61701 (maximum severity) Weight 22.3 kg
IEC 61215 (MQT 23.1 LeTID detection) draft Wind: 2400 Pa, 245 kg/m² front & back
LeTID Test6 Max. Load
standard Snow: 5400 Pa, 550 kg/m² front
PID Test Potential-Induced Degradation free: 1500 V Frame Class 2 silver anodized
Available Listings TUV

2066 mm 40 mm

A
527040

• Installation should only be done by a qualified technician.

• Solar module has full voltage even in very low light.

Field Wiring: Cu wiring only, min. 12 AWG/4 mm2, insulated for 90° C min.
Suitable for ungrounded, positive, or negative grounded DC systems
1

Maximum Series Fuse

Short-Circuit Current (Isc)
Open-Circuit Voltage (Voc)
Current (Imp)
Voltage (Vmp)
Rated Power (Pmax)1 (+5/ 0 %)
MODEL: SPR-P19-410-COM
Standard Test Conditions: 1000 W/m2, AM 1.5, 25° C
998 mm A
SEVERE ELECTRICAL HAZARD
Patented as shown at www.sunpower.com/patents

WARNING
www.sunpower.com

15
9.94
53.1
9.35
43.9
410
W
A
A
V
A
V
Max. System Voltage:1500 V DC
Fire Rating: Class C
Safety Class II

FRAME PROFILE

1 Independent Shade Study by CFV Laboratory. 2016.

40 mm
2 SunPower 415 W, 20.1% efficient, compared to a Conventional Panel on
same-sized arrays (330 W p-multi, 17% efficient, approx. 1.94 m²), 3% more
energy per watt (based on PVSim runs for avg US climate), 0.25%/yr slower (B)
degradation rate (Jordan, et. al. Robust PV Degradation Methodology and
Application. PVSC 2018).
3 Osborne. "SunPower supplying P-Series modules to a 125MW NextEra
project." PV-Tech.org. March 2017. (A) Cable Length: 1200 mm +/-15 mm
4 Measured at Standard Test Conditions (STC): irradiance of 1000 W/m², AM (B) Long Side: 32 mm
1.5, and cell temperature 25° C. Short Side: 24 mm
5 Class C fire rating per IEC 61730.
6 Fraunhofer CSP LID Sensitivity according to IEC 61215 (MQT 23.1 LeTID
Read safety and installation instructions before using this product.
detection), <1% power loss.

Designed in USA, assembled in China.

See www.sunpower.com.au for more reference information.

Specifications included in this datasheet are subject to change without notice.

©2019 SunPower Corporation. All rights reserved. SUNPOWER and the

SUNPOWER logo are registered trademarks of SunPower Corporation in
Europe, the U.S., and other countries as well.

5XXXXX REV A / A4_EN

1 800 786 769 Publication Date: December 2019

©2018 SunPower Corporation. All rights reserved.

sunpower.com.au