A
PRACTICAL TRAINING
REPORT
ON
“Summer Internship”
Taken At
Balaji Construction Company, Hanumangarh
Submitted in partial fulfilment for the awar of the degree of
BACHELOR OF TECHNOLOGY
In
Civil Engineering
Guided by: Submitted by:
External /Internal Supervisor Name : Bajrang
(Assistant/ Associate Professor) Reg.no..: PCE21CE008
RAJASTHAN TECHNICAL UNIVERSITY, KOTA
DEPARTMENT OF CIVIL ENGINEERING
POORNIMA COLLEGE OF ENGINEERING, SITAPURA,
JAIPUR
July- 2022
This is to certify that the Practical Training Seminar report for Practical Training
taken at Balaji Construction Company under Er. Kanaram From 22th July 2022 to
4th August 2022 is submitted by Bajrang in partial fulfilment for the award of
degree of Bachelor of Technology in Civil Engineering has been found satisfactory
and is approved for submission.
Pran N. Dadhich (D. Eng.) Rituraj Singh Rathore
(Name of Department Head) (Name of Faculty Coordinators)
Certificate
Acknowledgments
The satisfaction and euphoria that accompany the successful completion of the task
would be great, but incomplete without the mention of the people, who made it possible
with their constant guidance and encouragement crowns all the efforts with success.
I am thankful to Dr. S.M. Seth, Chairman (Emeritus), PF, Mr. Shashikant Singhi,
Chairman, PF, Dr. Mahesh Bundele, Campus Director, PCE and Mr. Pankaj Dhemla,
Vice Principal, PCE for providing us a platform to carry out such an insightful Industrial
Training successfully.
I profoundly thank Rituraj Singh Rathore, Assistant Professor, Civil Engineering
Department, PCE for accepting and providing me the opportunity to work under his
guidance and close supervision.
I sincerely express my deep sense of gratitude to Dr. Pran N Dadhich, Head of
Department, Civil Engineering, PCE for his expert technical guidance and constant
encouragement, and support in carrying out my Industrial Training successfully.
I would like to tell a special thanks to Rituraj Singh Rathore, Assistant Professor , PCE
for his expert and valuable suggestions, guidance and motivation.
The internship opportunity I had with Balaji Construction Company was a great chance
for learning and professional development. Therefore, I consider myself as a very lucky
individual as I was provided with an opportunity to be a part of it. I express my deepest
thanks to Er. Kanaram, Project Manager for taking part in useful decision & giving
necessary advices and guidance and arranged all facilities to make life easier. I choose
this moment to acknowledge his contribution gratefully.
I perceive as this opportunity as a big milestone in my career development. I will strive to
use gained skills and knowledge in the best possible way, and I will continue to work on
their improvement, in order to attain desired career objectives. Hope to continue
cooperation with all of you in the future.
Table of Contents
page
Abstract i
Certificate ii
Acknowledgments iii
Table of Contents iv
List of Tables v
List of Figures vi
List of Symbols vii
Chapter I; Introduction 1
1. 1 Introduction 1
1.2 Background of the Company. 2
1.3 Organizational Structure 3
1.4 Nature of the Work 4
Chapter 2: Methodology
This chapter includes methodology adopted by organisation to carry out existing project work.
This includes detailing of materials, resources, software etc. to designing and construction of
building and structures.
Chapter 3: Testing and Analysis
This section includes observation and results obtained by designing and testing of materials used
in work.
Chapter 4: Outcomes
This chapter includes outcome of the training, problems facing during training and tentative
solution of existing problems
Chapter 5: Conclusion
Following points should be highlighted
This chapter includes lessons learned skills developed (technical, communication, human, image
building etc), knowledge gained, suitability of organization and limitations and
recommendations. REFERENCES
APPENIDICES
List of Tables
Table Title page
3.1 List of publications 10
List of Figures
Figure Title page
2.1 Location map of Jaipur 9
Nohar district Hanumangarh
List of Symbols
Symbol Description
Ast Area of steel reinforcement bars on tension face
Asc Area Of steel reinforcement bars on compression face
Chapter 1
Introduction
• Name of project – Building Construction
• Company Name – Balaji ConstructinCompany
• Location of site - Vaishali Estate, Gandhipath West, Jaipur
• Training Start – 22th July 2022
• Training end – 4rd August 2022
• Project Manager – Mr. Kanaram
Chapter 2
METHODOLOGY
MATERIAL USED FOR CONSTRUCTION
• Cement: The function of cement is to combine with water and to
form cement paste. This paste sets and binds the aggregate
together into a stone like hard mass & thus provide strength, and
durability.
• Aggregates: Aggregates are small pieces of broken stones in
irregular size and shapes.
• Water: It is important ingredient of concrete because it combines
with cement and forms a binding paste. The paste thus formed
fills up the voids of the sands and coarse aggregate bringing them
into close adhesion.
Chapter 3
Testing And Analysis
Wood, cement, aggregates, metals, bricks, concrete, clay are
the most common type of building material used in
construction. The choice of these are based on their cost
effectiveness for building projects.
Chapter 4
Outcomes
•
They help in imbibing professional aptitude, broadens
the spectrum, or widens the horizon of our knowledge.
It allows students to procure and experience work-life
balance, assists in establishing professional networks
and contacts.
Chapter 5
Conclusion
•
During my training , I have learn the power of patience
while carrying out these great construction.
Also learnt that how much teamwork plays the role
References
References Style Guide
Journal article Author, A.A. and Author, B., Year. Title of article. Title of Journal, Vol (issue),
pages.
Evans, W.A., 1994. Approaches to intelligent information retrieval. Information
Processing and Management, 7 (2), 147–168.
Book Author, A., Year. Title of book. Place of Publication: Publisher.
Mercer, P.A. and Smith, G., 1993. Private view data in the UK. 2nd ed. London:
Longman.
Chapter Author, A., Year. Title of chapter. In: A. Editor and B. Editor, eds. Title of book.
Place of publication: Publisher, pages.
Bantz, C.R., 1995. Social dimensions of software development. In: J.A.
Anderson, ed. Annual review of software management and development.
Newbury Park, CA: Sage, 502–510.
Internet Author, A., Year. Title of document [online]. Source. Available from: URL
document [Accessed date Mon Year].
Holland, M., 2004. Guide to citing Internet sources [online]. Poole, Bournemouth
University. Available from:
http://www.bournemouth.ac.uk/library/using/guide_to_citing_internet_sourc.html
[Accessed 4 November 2004].
Newspaper Author, A. (or Title of Newspaper), Year. Title of article. Title of Newspaper, day
article Month, page, column.
Independent, 1992. Picking up the bills. Independent, 4 June, p. 28a.
Thesis Author, A., 1995. Title of thesis. Type of thesis (degree). Name of University.
Agutter, A.J., 1995. The linguistic significance of current British slang. Thesis
(PhD). Edinburgh University.
