ZODIAC AEROSPACE SERVICES

TECHNICAL PUBLICATION DEPARTMENT

61, RUE PIERRE CURIE - CS20001
78373 PLAISIR CEDEX - FRANCE
Phone: + 33 (0)1 61 34 23 23 - Fax: +33 (0)1 61 34 21 13

LETTER OF TRANSMITTAL

TO : HOLDERS OF COMPONENT MAINTENANCE MANUAL 35-13-63, PART NUMBER MC10

SERIES.
– The Re-issue, dated AUG 16/16 is attached and covers all components held by every operator.
GENERAL:
– MC10-08-116, MC10-19-03, MC10-19-104, MC10-25-02, MC10-25-110 and MC10-25-159
added.
– Wiring diagrams of radio cords added.
FILING INSTRUCTIONS :
This issue replaces the Component Maintenance Manual Rev 12 dated of Aug 16/16. Discard all
previous copies.

TRANSMITTAL SHEET
Page 1/2
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROSPACE SERVICES. Copy and distribution to a third party are strictly forbidden. Printed in France.
ZODIAC AEROSPACE SERVICES

THIS PAGE INTENTIONALLY LEFT BLANK

TRANSMITTAL SHEET
Page 2/2
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROSPACE SERVICES. Copy and distribution to a third party are strictly forbidden. Printed in France.
ZODIAC AEROTECHNICS
AIRCRAFT SYSTEMS | CABIN & COCKPIT SYSTEMS DIVISION

(OXYGEN SYSTEM EUROPE)

61 Rue Pierre Curie
CS20001
78373 PLAISIR CEDEX - France
Phone: + 33 1 30 54 82 00
Fax: + 33 1 30 55 71 61

(F5341)

COMPONENT MAINTENANCE MANUAL

WITH ILLUSTRATED PARTS LIST

CREW OXYGEN MASK REGULATOR

PART NUMBER
MC10 - SERIES

MC10-02-01 MC10-02-10 MC10-02-104 MC10-02-115 MC10-02-171 MC10-04-21 MC10-04-107

MC10-02-02 MC10-02-22 MC10-02-105 MC10-02-116 MC10-02-103 MC10-04-22 MC10-04-109
MC10-02-03 MC10-02-50 MC10-02-106 MC10-02-117 MC10-02-114 MC10-04-27 MC10-04-110
MC10-02-04 MC10-02-54 MC10-02-107 MC10-02-121 MC10-02-60 MC10-04-77 MC10-04-111
MC10-02-05 MC10-02-55 MC10-02-108 MC10-02-155 MC10-04-01 MC10-04-101 MC10-04-112
MC10-02-06 MC10-02-69 MC10-02-109 MC10-02-169 MC10-04-02 MC10-04-102 MC10-04-115
MC10-02-07 MC10-02-102 MC10-02-112 MC10-02-170 MC10-04-07 MC10-04-105 MC10-04-116
The Part Number Listing Continues on the Next Page

The technical data in this document (or file) is controlled for export under the Export
Administration Regulations (EAR), 15 CFR Parts 730-774, ECCN: 9E991 Violations of these
laws may be subject to fines and penalties under the Export Administration Act

Page T-1
Revision 13
Initial Issue Date: Feb 28/02 35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
PART NUMBERS (CONTINUED)
MC10-04-121 MC10-06-124 MC10-08-126 MC10-14-01 MC10-15-17 MC10-15-168 MC10-22-01
MC10-04-122 MC10-06-125 MC10-08-127 MC10-14-02 MC10-15-18 MC10-15-170 MC10-22-100
MC10-04-127 MC10-06-126 MC10-08-128 MC10-14-20 MC10-15-101 MC10-15-171 MC10-22-101
MC10-04-157 MC10-06-127 MC10-08-209 MC10-14-21 MC10-15-102 MC10-15-176 MC10-25-00
MC10-04-159 MC10-06-128 MC10-09-00 MC10-14-22 MC10-15-104 MC10-16-100 MC10-25-01
MC10-04-177 MC10-08-00 MC10-09-01 MC10-14-100 MC10-15-105 MC10-16-101 MC10-25-02
MC10-05-04 MC10-08-01 MC10-10-100 MC10-14-101 MC10-15-107 MC10-16-103 MC10-25-04
MC10-05-100 MC10-08-02 MC10-10-101 MC10-14-102 MC10-15-108 MC10-16-104 MC10-25-101
MC10-05-101 MC10-08-05 MC10-10-102 MC10-14-103 MC10-15-109 MC10-16-105 MC10-25-102
MC10-05-102 MC10-08-09 MC10-10-103 MC10-14-104 MC10-15-113 MC10-16-150 MC10-25-103
MC10-05-104 MC10-08-13 MC10-10-104 MC10-14-120 MC10-15-114 MC10-16-151 MC10-25-104
MC10-05-124 MC10-08-25 MC10-12-100 MC10-14-121 MC10-15-115 MC10-16-152 MC10-25-105
MC10-05-152 MC10-08-100 MC10-12-101 MC10-14-122 MC10-15-116 MC10-16-153 MC10-25-106
MC10-06-00 MC10-08-102 MC10-12-150 MC10-14-123 MC10-15-117 MC10-17-00 MC10-25-107
MC10-06-01 MC10-08-103 MC10-12-151 MC10-14-124 MC10-15-118 MC10-17-100 MC10-25-108
MC10-06-03 MC10-08-104 MC10-12-152 MC10-14-151 MC10-15-119 MC10-17-101 MC10-25-110
MC10-06-20 MC10-08-106 MC10-13-02 MC10-15-01 MC10-15-120 MC10-19-00 MC10-25-124
MC10-06-21 MC10-08-107 MC10-13-03 MC10-15-02 MC10-15-121 MC10-19-01 MC10-25-154
MC10-06-23 MC10-08-108 MC10-13-04 MC10-15-03 MC10-15-122 MC10-19-02 MC10-25-158
MC10-06-100 MC10-08-109 MC10-13-05 MC10-15-04 MC10-15-151 MC10-19-03 MC10-25-159
MC10-06-101 MC10-08-110 MC10-13-102 MC10-15-05 MC10-15-152 MC10-19-101 MC10-25-204
MC10-06-102 MC10-08-111 MC10-13-103 MC10-15-07 MC10-15-155 MC10-19-102 MC10-25-110
MC10-06-104 MC10-08-112 MC10-13-104 MC10-15-09 MC10-15-157 MC10-19-103 MC10-32-101
MC10-06-105 MC10-08-114 MC10-13-114 MC10-15-10 MC10-15-158 MC10-19-104 MC10-32-102
MC10-06-106 MC10-08-116 MC10-13-150 MC10-15-11 MC10-15-159 MC10-19-151 MC10-32-103
MC10-06-120 MC10-08-120 MC10-13-151 MC10-15-12 MC10-15-166 MC10-20-00 MC10-35-101
MC10-06-121 MC10-08-123 MC10-14-00 MC10-15-13 MC10-15-167 MC10-22-00 MC10-35-102
- MC10-08-124 - - - -

Page T-2
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
Copyright © 2016 by ZODIAC AEROSPAC6. All rights reserved.
The data and information contained in this document are proprietary rights of ZODIAC AEROSPACE.
This document is given in confidence and may not be reproduced, stored in a retrieval system, or
transmitted to a third party, in any form or by any means, electronic, mechanical, photocopying, or
otherwise, without the prior written permission of ZODIAC AEROSPACE.
Any unauthorized copy, distribution or utilization is illegal according to Article L 122-4 and L 335-2
of the "Code de la Propriété Intellectuelle" ("Code of the Intellectual Property") and to international
agreements related to proprietary rights.

Page T-3
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 Page T-4
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

RECORD OF REVISIONS
REV ISSUE INSERTED REV ISSUE INSERTED
No DATE DATE BY No DATE DATE BY
1 SEP 30/02 SEP 30/02 ZS
2 JAN 31/03 JAN 31/03 ZS
3 OCT 31/03 OCT 31/03 ZS
4 FEB 10/04 FEB 10/04 ZS
5 MAY 31/05 MAY 31/05 ZS
6 MAY 15/07 MAY 15/07 ZS
7 MAR 17/09 MAR 17/09 ZS
8 MAR 23/10 MAR 23/10 ZS
9 OCT 12/11 OCT 12/11 ZS
10 SEP 16/15 SEP 08/15 ZS
11 NOV 20/15 NOV 20/15 ZS
12 AUG 16/16 AUG 16/16 ZS
13 OCT 04/16 OCT 04/16 ZS

Page RR-1
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

THIS PAGE INTENTIONALLY LEFT BLANK

Page RR-2
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

RECORD OF TEMPORARY REVISIONS

TEMP INSERTED REMOVED

ISSUE DATE PAGE No.
REV NO.
DATE BY DATE BY

Page RTR-1
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

THIS PAGE INTENTIONALLY LEFT BLANK

Page RTR-2
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

LIST OF SERVICE BULLETINS

REV ISSUE INCORP.
SB/SIL No. TITLE
No. DATE DATE
MA/B/C10-35-29 3 JUN 15/92 FEB 28/02 Change of mask lock. Mandatory.
Identification (ref SB).
MSE/MC10-35-45 0 JUN 14/91 FEB 28/02 Modification of the mask lock.
Recommended. Identification by modification
of part number or amendment (ref SB).
MA/C/F10-35-56 1 JUL 05/99 FEB 28/02 Change of radio cord attachment.
Recommended. Identification by amendment
A,D or H (ref SB).
MA/B/C/F10-35-58 0 MAR 05/96 FEB 28/02 Change of locking block for hose
attachment. Recommended.
MC10-35-62 0 DEC10/97 FEB 28/02 Replacement of comfort harness MXH20
and MXH21 respectively by MXH20-1
and MXH21-1. Optional.
MSE/MC/F10-35-65 0 MAY 17/99 FEB 28/02 Replacement of regulator main casing.
Replacement of regulator cover plate.
Replacement of overpressure valve.
Optional. Identification by amendment J,
K or L for new parts (ref SB).
MC10-35-70 0 OCT 16/00 FEB 28/02 Installation of clips on harness.
MA/B/C/F10-35-86 0 MAY 29/01 FEB 28/02 Replacement of seal. Recommended.
Identification by amendment N.
MA/B/C/F10-35-87 1 MAY 29/01 FEB 28/02 Improvement of the tightness.
Recommended. Identification by
amendment M.
MA/B/C/F10-35-88 0 MAY 29/01 FEB 28/02 Improvement of the leaktightness. Optional.
Identification by amendment P.
MA/B/C/F10-35-89 0 MAY 29/01 FEB 28/02 Improvement of locking. Optional.
SIL18 10 MAY 20/16 MAY 31/05 Maintainability data.
MC10-35-108 0 JUN 01/01 SEP 30/02 Replacement of microphone. Optional
MC/F10-35-111 0 DEC 19/01 SEP 30/02 Improvement of the tightness. Strongly
recommended. Identification by
amendment M.
MC10-35-112 0 NOV 05/11 JAN 31/03 Replacement of microphone. Optional
MC/F10-35-123 0 JAN 03/03 JAN 31/03 Cancellation of potential interference
between radio cable and harness inflation
control plate. Strongly recommended.
Identification by amendment and modification
of regulator part number.
MC10-35-124 0 DEC03/02 JAN 31/03 Replacement of microphone. Identification
by change of part number (ref. SB).
MC/F10-35-126 0 FEB 06/03 OCT 31/03 Improvement of locking. Optional.
MC10-13-150-35-133 0 SEP 08/03 OCT 31/03 Replacement of pneumatic harness.
Optional. Identification by amendment R.

Page SBL-1
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

LIST OF SERVICE BULLETINS (Cont'd)

REV ISSUE INCORP.
SB/SIL No. TITLE
No. DATE DATE
MC10-02–126-35-134 0 JAN 24/05 MAY 31/05 Replacement of radio cord. Optional.
Identification by change of part
number (ref. SB).
MC/F10-35-140 0 AUG 16/07 MAR 17/09 Replacement of pneumatic harness
assembly. Recommended. Identification
by amendment S.
MC10-35-164 1 DEC 04/09 MAR 17/09 Replacement of pneumatic harness
assembly. Optional. Identification
by amendment S.
MC10/MF10-35-165 0 OCT 20/09 OCT 23/10 Improvement of the robustness of the
regulator main casing, manufacturing
improvement. Optional. Identification
by amendment T.
MC10-35-169 1 JAN 15/09 MAR 17/09 Improvement of the robustness of the
regulator main casing, manufacturing
improvement. Optional. Identification
by amendment T.
MC10-35-170 1 DEC 04/09 MAR 17/09 Improvement of the robustness of the
regulator main casing, manufacturing
improvement. Optional. Identification
by amendment T.
MC10-35-209 0 DEC 02/09 MAR 23/10 Replacement of pneumatic harness
assembly. Optional. Identification
by amendment S.
MC10-35-210 0 DEC 02/09 MAR 23/10 Improvement of the robustness of the
regulator main casing, manufacturing
improvement. Optional. Identification
by amendment T.
MA/B/C-F10-35-144 1 FEB 15/11 MAR 23/10 Crew Oxygen Mask Regulator - Replacement
of the Inflatable Harness Assembly. Optional.
Identification by amendment S.
MC10-02-35-218 0 JAN 12/11 OCT 12/11 Crew Oxygen Mask Regulator - Improvement
of the regulator main casing and Replacement
of the inflatable harness assy. Optional.
Identification by amendment S and /or T.
MC10-04-35-192 0 FEB 07/11 OCT 12/11 Crew Oxygen Mask Regulator - Replacement
of the inflatable harness assembly. Optional.
Identification by amendment S.
MC10-06-35-208 0 FEB 22/10 MAR 23/10 Crew Oxygen Mask Regulator - 1)
Harnes replacement - 2) Improvement
of the robustness of the regulator main
casing. Optional. Identification by
amendment S and /or T.

Page SBL-2
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

LIST OF SERVICE BULLETINS (Cont'd)

REV ISSUE INCORP.
SB/SIL No. TITLE
No. DATE DATE
MC10-35-171 1 APR 18/11 OCT 12/11 Crew Oxygen Mask Regulator - Improvement
of the robustness of the regulator main
casing, manufacturing improvement.
Optional. Identification by amendment T.
MC10-35-207 1 JAN 08/11 OCT 12/11 Crew Oxygen Mask Regulator - Improvement
of the regulator main casing and Replacement
of the inflatable harness assy Optional.
Identification by amendment S and /or T.
MC10/MF10-35-141 1 MAR 28/11 OCT 12/11 Crew Oxygen Mask Regulator - Replacement
of the inflatable harness assembly. Optional.
Identification by amendment S.
MC10/MF10-35-158 1 FEB 02/12 SEP 08/15 Crew Oxygen Mask Regulator - Improvement
of the robustness of the regulator main
casing, manufacturing improvement.
Optional. Identification by amendment T.
MC10/MF10-35-167 0 FEB 09/11 SEP 08/15 Crew Oxygen Mask Regulator - Improvement
of the robustness of the regulator main
casing, manufacturing improvement.
Optional. Identification by amendment T.
MC/F10-35-142 0 NOV 15/10 OCT 12/11 Crew Oxygen Mask Regulator - Improvement
of re-stowage operation. Optional.
Identification by amendment S.
MSE101/MC10-35-205 0 FEB 24/10 SEP 08/15 Crew Oxygen Mask Regulator - Replacement
of the inflatable harness assembly. Optional.
Identification by amendment S.
MSE101/MC10-35-206 0 FEB 24/10 SEP 08/15 Crew Oxygen Mask Regulator - Improvement
of the robustness of the regulator main
casing, manufacturing improvement.
Optional. Identification by amendment T.
MC10-15-35-176 0 OCT 12/11 SEP 08/15 Crew Oxygen Mask Regulator - Improvement
of the robustness of the regulator main
casing, manufacturing improvement
Optional. Identification by amendment T.
SIL69 0 FEB 08/08 MAR 17/09 Crew Oxygen Mask Regulator - Verification
of the supply hose assembly.
MCF-SBU-35-001 1 DEC 03/12 SEP 08/15 Oxygen Mask Regulator - Inspection for
potential default calibration. Mandatory.
MC10-35-277 1 NOV 10/14 SEP 08/15 Crew Oxygen Mask Regulator - Replacement
of the inflatable harness assembly.
Optional. Identification by changement
of PNR and amendment W.
MC10-35-274 2 JUN 25/14 SEP 08/15 Crew Oxygen Mask Regulator - harness
Assembly - Inspection for potential default
calibration. Mandatory.

Page SBL-3
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

LIST OF SERVICE BULLETINS (Cont'd)

REV ISSUE INCORP.
SB/SIL No. TITLE
No. DATE DATE
MA-B-C-F10-35-260 2 JUN 06/16 SEP 08/15 Oxygen Mask Regulator - Replacement of
the inflatable harness assembly. Optional.
Identification by amendment W.
MC10-35-267 0 DEC 23/13 SEP 08/15 Crew Oxygen Mask Regulator - Improvement
of the robustness of the coverplate. Optional.
Identification by amendment Z.
MC10-12-151-35-132 1 NOV 06/13 SEP 08/15 Crew Oxygen Mask Regulator - Replacement
of the inflatable harness assembly. Optional.
Identification by changement of PNR.
MC10-02-35-269 0 OCT 11/13 SEP 08/15 Crew Oxygen Mask Regulator - Improvement
of the robustness of the coverplate. Optional.
Identification by amendment Y.
MC10-35-263 1 MAY 15/13 SEP 08/15 Crew Oxygen Mask Regulator - Replacement
of microphone. Optional. Identification
by amendment Y.
MACF10/MLCD20-35-258 0 JAN 18/13 SEP 08/15 Oxygen Mask Regulator - Replacement of
the inflatable harness assembly. Optional.
Identification by amendment W.
MCF10-MF20-35-255 0 JAN 14/13 SEP 08/15 Crew Oxygen Mask Regulator - Replacement
of the inflatable harness assembly. Optional.
Identification by amendment W.
MCF10-35-262 0 DEC 04/12 SEP 08/15 Crew Oxygen Mask Regulator - Replacement
of the inflatable harness assembly. Optional.
Identification by amendment W.
MCF10/MRA-35-254 0 DEC 04/12 SEP 08/15 Crew Oxygen Mask Regulator - Replacement
of the inflatable harness assembly. Optional.
Identification by amendment W.
MC10/MF10-35-212 0 JUL 26/12 SEP 08/15 Crew Oxygen Mask Regulator - Replacement
of the inflatable harness assembly. Optional.
Identification by amendment S.
MC10/MF10-35-249 0 JUL 17/12 SEP 08/15 Crew Oxygen Mask Regulator - Replacement
of microphone. Optional. Identification
by amendment V.
MC10/MF10-35-158 1 FEB 02/12 SEP 08/15 Crew Oxygen Mask Regulator - Improvement
of the robustness of the regulator main
casing, manufacturing improvement
Optional. Identification by amendment T.
MCF10–35–252 0 May 18/16 AUG 16/16 Oxygen Mask Regulator - Replacement of
the inflatable harness assembly. Optional.
Identification by amendment W.

Page SBL-4
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

LIST OF EFFECTIVE PAGES

SUBJECT PAGE DATE SUBJECT PAGE DATE

TITLE PAGE T-1 Oct 04/16 13 Oct 04/16

T-2 Oct 04/16 14 Oct 04/16
T-3 Oct 04/16 15 Oct 04/16
T-4 Blank 16 Oct 04/16
RECORD OF REVISIONS RR-1 Oct 04/16 17 Oct 04/16
RR-2 Blank 18 Oct 04/16
RECORD OF TEMPORARY RTR-1 Oct 04/16 19 Oct 04/16
REVISIONS RTR-2 Blank 20 Oct 04/16
LIST OF SERVICE SBL-1 Oct 04/16 21 Oct 04/16
BULLETINS SBL-2 Oct 04/16 22 Oct 04/16
SBL-3 Oct 04/16 23 Oct 04/16
SBL-4 Oct 04/16 24 Oct 04/16
LIST OF EFFECTIVE PAGES LEP-1 Oct 04/16 25 Oct 04/16
LEP-2 Oct 04/16 26 Oct 04/16
LEP-3 Oct 04/16 27 Oct 04/16
LEP-4 Oct 04/16 28 Oct 04/16
TABLE OF CONTENTS TOC-1 Oct 04/16 29 Oct 04/16
TOC-2 Blank 30 Oct 04/16
TOC-3 Oct 04/16 31 Oct 04/16
TOC-4 Oct 04/16 32 Blank
INTRODUCTION INTRO-1 Oct 04/16 TESTING AND FAULT 1001 Oct 04/16
INTRO-2 Oct 04/16 ISOLATION 1002 Oct 04/16
INTRO-3 Oct 04/16 1003 Oct 04/16
INTRO-4 Oct 04/16 1004 Blank
INTRO-5 Oct 04/16 1005 Oct 04/16
INTRO-6 Oct 04/16 1006 Oct 04/16
DESCRIPTION AND 1 Oct 04/16 1007 Oct 04/16
OPERATION 2 Oct 04/16 1008 Oct 04/16
3 Oct 04/16 1009 Oct 04/16
4 Oct 04/16 1010 Oct 04/16
5 Oct 04/16 1011 Oct 04/16
6 Oct 04/16 1012 Oct 04/16
7 Oct 04/16 1013 Oct 04/16
8 Oct 04/16 1014 Oct 04/16
9 Oct 04/16 1015 Oct 04/16
10 Oct 04/16 1016 Oct 04/16
11 Oct 04/16 1017 Oct 04/16
12 Oct 04/16 1018 Oct 04/16

Page LEP-1
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

LIST OF EFFECTIVE PAGES (Cont'd)

SUBJECT PAGE DATE SUBJECT PAGE DATE

1019 Oct 04/16 1057 Oct 04/16
1020 Oct 04/16 1058 Oct 04/16
1021 Oct 04/16 1059 Oct 04/16
1022 Blank 1060 Oct 04/16
1023 Oct 04/16 1061 Oct 04/16
1024 Oct 04/16 1062 Oct 04/16
1025 Oct 04/16 1063 Oct 04/16
1026 Oct 04/16 1064 Blank
1027 Oct 04/16 SCHEMATICS AND WIRING 2001 Oct 04/16
1028 Oct 04/16 DIAGRAMS 2002 Oct 04/16
1029 Oct 04/16 DISASSEMBLY 3001 Oct 04/16
1030 Oct 04/16 3002 Oct 04/16
1031 Oct 04/16 3003 Oct 04/16
1032 Oct 04/16 3004 Oct 04/16
1033 Oct 04/16 3005 Oct 04/16
1034 Oct 04/16 3006 Blank
1035 Oct 04/16 CLEANING 4001 Oct 04/16
1036 Oct 04/16 4002 Oct 04/16
1037 Oct 04/16 4003 Oct 04/16
1038 Oct 04/16 4004 Blank
1039 Oct 04/16 CHECK/INSPECTION 5001 Oct 04/16
1040 Oct 04/16 5002 Blank
1041 Oct 04/16 5003 Oct 04/16
1042 Oct 04/16 5004 Blank
1043 Oct 04/16 5005 Oct 04/16
1044 Oct 04/16 5006 Blank
1045 Oct 04/16 5007 Oct 04/16
1046 Oct 04/16 5008 Blank
1047 Oct 04/16 REPAIR 6001 Oct 04/16
1048 Oct 04/16 6002 Oct 04/16
1049 Oct 04/16 6003 Oct 04/16
1050 Oct 04/16 6004 Oct 04/16
1051 Oct 04/16 6005 Oct 04/16
1052 Oct 04/16 6006 Blank
1053 Oct 04/16 ASSEMBLY 7001 Oct 04/16
1054 Oct 04/16 7002 Oct 04/16
1055 Oct 04/16 7003 Oct 04/16
1056 Oct 04/16 7004 Oct 04/16

Page LEP-2
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

LIST OF EFFECTIVE PAGES (Cont'd)

SUBJECT PAGE DATE SUBJECT PAGE DATE

7005 Oct 04/16 10027 Oct 04/16
7006 Oct 04/16 10028 Oct 04/16
7007 Oct 04/16 10029 Oct 04/16
7008 Oct 04/16 10030 Oct 04/16
7009 Oct 04/16 10031 Oct 04/16
7010 Oct 04/16 10032 Blank
FITS AND CLEARANCES 8001 Oct 04/16 DETAILED PARTS LIST 10033 Oct 04/16
8002 Blank 10033 Oct 04/16
SPECIAL TOOLS, 9001 Oct 04/16 10034 Oct 04/16
FIXTURES, EQUIPMENT 9002 Oct 04/16 10035 Oct 04/16
AND CONSUMABLES 9003 Oct 04/16 10036 Oct 04/16
9004 Oct 04/16 10037 Oct 04/16
ILLUSTRATED PARTS LIST 10001 Oct 04/16 10038 Oct 04/16
10002 Blank 10039 Oct 04/16
INTRO 10003 Oct 04/16 10040 Blank
10004 Oct 04/16 10041 Oct 04/16
10005 Oct 04/16 10042 Oct 04/16
10006 Oct 04/16 10043 Oct 04/16
10007 Oct 04/16 10044 Oct 04/16
10008 Oct 04/16 10045 Oct 04/16
VCI 10009 Oct 04/16 10046 Oct 04/16
10010 Blank 10047 Oct 04/16
NI/ALPHA 10011 Oct 04/16 10048 Blank
10012 Oct 04/16 10049 Oct 04/16
10013 Oct 04/16 10050 Oct 04/16
10014 Oct 04/16 10051 Oct 04/16
10015 Oct 04/16 10052 Oct 04/16
10016 Oct 04/16 10053 Oct 04/16
10017 Oct 04/16 10054 Oct 04/16
10018 Oct 04/16 10055 Oct 04/16
10019 Oct 04/16 10056 Oct 04/16
10020 Oct 04/16 10057 Oct 04/16
10021 Oct 04/16 10058 Oct 04/16
10022 Oct 04/16 10059 Oct 04/16
10023 Oct 04/16 10060 Oct 04/16
10024 Oct 04/16 10061 Oct 04/16
10025 Oct 04/16 10062 Oct 04/16
10026 Oct 04/16 10063 Oct 04/16

Page LEP-3
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

LIST OF EFFECTIVE PAGES (Cont'd)

SUBJECT PAGE DATE SUBJECT PAGE DATE

10064 Blank 10102 Oct 04/16
10065 Oct 04/16 10103 Oct 04/16
10066 Oct 04/16 10104 Oct 04/16
10067 Oct 04/16 10105 Oct 04/16
10068 Oct 04/16 10106 Oct 04/16
10069 Oct 04/16 10107 Oct 04/16
10070 Oct 04/16 10108 Oct 04/16
10071 Oct 04/16 10109 Oct 04/16
10072 Oct 04/16 10110 Oct 04/16
10073 Oct 04/16 10111 Oct 04/16
10074 Oct 04/16 10112 Oct 04/16
10075 Oct 04/16 10113 Oct 04/16
10076 Oct 04/16 10114 Oct 04/16
10077 Oct 04/16 10115 Oct 04/16
10078 Oct 04/16 10116 Oct 04/16
10079 Oct 04/16 10117 Oct 04/16
10080 Blank SPECIAL PROCEDURES 11001 Oct 04/16
10081 Oct 04/16 11002 Blank
10082 Oct 04/16 STORAGE 15001 Oct 04/16
10083 Oct 04/16 15002 Oct 04/16
10084 Oct 04/16
10085 Oct 04/16
10086 Oct 04/16
10087 Oct 04/16
10088 Oct 04/16
10089 Oct 04/16
10090 Oct 04/16
10091 Oct 04/16
10092 Oct 04/16
10093 Oct 04/16
10094 Oct 04/16
10095 Oct 04/16
10096 Oct 04/16
10097 Oct 04/16
10098 Blank
10099 Oct 04/16
10100 Oct 04/16
10101 Oct 04/16

Page LEP-4
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TABLE OF CONTENTS

Page
DESCRIPTION AND OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

TESTING AND FAULT ISOLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1001

SCHEMATICS AND WIRING DIAGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2001

DISASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3001

CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4001

CHECK/INSPECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5001

REPAIR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6001

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7001

FITS AND CLEARANCES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8001

SPECIAL TOOLS, FIXTURE, EQUIPMENT AND CONSUMABLES . . . . . . . . . . . . . . . . . . . . . . . 9001

ILLUSTRATED PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IPL 10001

SPECIAL PROCEDURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11001

REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NOT APPLICABLE

INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NOT APPLICABLE

SERVICING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NOT APPLICABLE

STORAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15001

REWORK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NOT APPLICABLE

Page TOC-1
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

THIS PAGE INTENTIONALLY LEFT BLANK

Page TOC-2
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TABLE OF FIGURES

Figure Page

DESCRIPTION AND OPERATION

1 CREW OXYGEN MASK REGULATOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
2 OVERALL DIMENSIONS (SHEET 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
2 OVERALL DIMENSIONS (SHEET 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
2 OVERALL DIMENSIONS (SHEET 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

TESTING AND FAULT ISOLATION

1001 TEST OF THE MASK REGULATOR OVERALL LEAKAGE . . . . . . . . . . . . . . . . . . . . . . . . . . 1057
1002 TEST OF THE MASK REGULATOR INWARD LEAKAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . 1058
1003 GOGGLES VENT VALVE FLOW TEST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1059
1004 SCHEMATIC TEST FIXTURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1060
1005 TEST OF “PRESS TO TEST” AND “EMERGENCY” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1061
1006 TEST OF THE IN-LINE FLOW INDICATOR (SHEET 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1062
1006 TEST OF THE IN-LINE FLOW INDICATOR (SHEET 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1063

SCHEMATICS AND WIRING DIAGRAMS

2001 RADIO CORD WIRING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2002

REPAIR
6001 REPLACEMENT OR INSTALLATION OF THE CLIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6005

ASSEMBLY
7001 RADIO CORD CONNECTION DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7007
7002 COLLAR INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7008
7003 VIEW OF THE MASK LOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7009
7004 TSO LABEL AND IDENTIFICATION LABEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7010

SPECIAL TOOLS, FIXTURE, EQUIPMENT AND CONSUMABLES

9001 TOOLS AND SPECIAL EQUIPMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9004

DETAILED PARTS LIST

1 REGULATOR, CREW OXYGEN MASK ............................................ 10033
1A REGULATOR, CREW OXYGEN MASK ............................................ 10041
1B REGULATOR, CREW OXYGEN MASK ............................................ 10049
1C REGULATOR, CREW OXYGEN MASK ............................................ 10057
1D REGULATOR, CREW OXYGEN MASK ............................................ 10065
1E REGULATOR, CREW OXYGEN MASK ............................................ 10073

Page TOC-3
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TABLE OF FIGURES (Cont'd)

Figure Page

1F REGULATOR, CREW OXYGEN MASK ............................................ 10081

1G REGULATOR, CREW OXYGEN MASK ............................................ 10089
1H REGULATOR, CREW OXYGEN MASK ............................................ 10099
1J REGULATOR, CREW OXYGEN MASK ............................................ 10107
1K REGULATOR, CREW OXYGEN MASK ............................................ 10113

Page TOC-4
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

INTRODUCTION

TASK 35-13-63-990-801-A01
1. Introduction

A. Information
(1) The Component Maintenance Manual (CMM) is written in accordance with the Air
Transport Association of America Specification No. 2200, Revision 2000-1 and
in AECMA Simplified English.
(2) The Component Maintenance Manual gives all the procedures supplied by the
manufacturer for use in the workshop, so that all persons can repair and completely
overhaul the component.
(3) The manual describes maintenance on the component in a workshop. It does
not define or show the level of maintenance for all special units, but gives all the
procedures necessary to let the person to do a test, disassemble, clean, check and
assemble a unit which has been rejected from serviceable use. The manual does
not describe maintenance on the component when it is installed on the aircraft.
(4) Only approved persons are permitted to do the maintenance procedures given in
this manual.
(5) Maintenance Task Oriented Support System (MTOSS) task and subtask
identification is used in this manual. The maintenance tasks and other data have
special MTOSS numbers for use of Electronic Data Processing (EDP). The user of
manual can ignore the MTOSS numbers.
(6) Where the data or procedures specified in this manual are different from those
specified by the regulatory agency which controls operation of your aircraft, obey
the data and procedures of the regulatory authority.
(7) This manual contains:
– Technical data for the component,
– Maintenance and repair procedures for the component,
– An Illustrated Parts List (IPL) or Illustrated Parts Catalog (IPC) with data for
the component parts. The IPL Figure and item number identifies parts in
all sections of the manual.

B. How to Use the Manual

(1) Make sure the manual contains the information applicable to your component.
Look on the Title Page for the part number.

Page INTRO-1
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

(2) If it is necessary to identify a part or find a part number, refer to the IPL (or IPC),
which has an introduction to show the procedure.
(3) The instructions in this manual must be used for all component maintenance.
Read all the applicable WARNINGS and CAUTIONS before you do the work on
the component.

C. Process Verification
(1) The manufacturer has validated the "Disassembly, Testing and Fault Isolation and
Assembly" procedures in this manual.
– Disassembly: verified by performance or simulation of the specified
procedures.
– Testing and Fault Isolation: verified by performance or simulation of the
specified procedures.
– Assembly: verified by performance or simulation of the specified procedures.

D. Modification
(1) All result data and illustrations in this manual are the last revision available at
the time of printing. ZODIAC AEROTECHNICS supplies updates to this manual
when necessary. When ZODIAC AEROTECHNICS issues a modification to units
included in this manual, ZODIAC AEROTECHNICS will revise the manual to
include the information.
(2) When there is a change, each updating gives the full instructions about the page
number of the pages, which must be replaced, added or removed. Revised test or
new texts are located with a vertical black line in the left margin.

E. Manual guidelines
(1) The CMM is divided into page blocks:

PAGE BLOCK TITLE

0001-0999 DESCRIPTION AND OPERATION
1001-1999 TESTING AND FAULT ISOLATION
2001-2999 SCHEMATICS AND WIRING DIAGRAMS
3001-3999 DISASSEMBLY
4001-4999 CLEANING
5001-5999 INSPECTION/CHECK
6001-6999 REPAIR
7001-7999 ASSEMBLY
8001-8999 FITS AND CLEARANCES

Page INTRO-2
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

PAGE BLOCK TITLE

9001-9999 SPECIAL TOOLS, FIXTURES, EQUIPMENT
AND CONSUMABLES
10001-10999 ILLUSTRATED PARTS LIST
11001-11999 SPECIAL PROCEDURES
12001-12999 REMOVAL
13001-13999 INSTALLATION
14001-14999 SERVICING
15001-15999 STORAGE
16001-16999 REWORK

F. Measurements
(1) The measurements given in this manual are taken from the original reference
document of the manufacturer.
(2) All values given in this manual are in System International (SI) units or sub-divisions
of these units. Imperial units or US are given in parenthesis immediately after the
metric unit. The decimal point in the SI is shown by a comma and in the Imperial
system by a full stop, e.g. 25,4 mm (1.00 in).
(3) Measurement conversion table :

From : SI measurement To : U.S. standard system

1 kPa 0.1450 psi
1 cm 0.3937 in
1N 0.2248 lbf
1g 0.0353 oz
1 kg 2.2046 lb
1L 0.2642 gal
1 L/min 0.2642 gal /min
1 mm 0.0394 in
1 N.m 8.8507 lbf.in
1 N.m 0.7376 lbf.ft
From : U.S. standard system To : SI measurement
1 psi 6,8948 kPa
1 in 25,4 mm
1 lbf 4,4482 N
1 oz 28,3495 g

Page INTRO-3
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

1 in.Hg 3,3864 kPa

1 lb 0,4536 kg
1 gal 3,7854 L
1 lbf.in 0,1130 N.m
1 lbf.ft 1,3558 N.m

G. Abbreviations
(1) The abbreviations used in this manual are given below:
– Amps = Ampere
– °C = degree Celsius
– cm3 = Cubic centimeter
– cmg = centimeter gramme
– cu.in = Cubic inch
– °F = Fahrenheit degree
– ft.lb = feet-pound
– g/cm2 = gramme/square centimeter
– in = inch
– In.lb = Inch pound
– kg = kilogramme
– kPa = kiloPascal
– hPa = hectoPascal
– lb = pound
– L/min = Liter per minute
– mbar = millibar
– mm = millimeter
– mm.Hg = Mercury millimeter
– MPa = MegaPascal
– mV = millivolt
– N.m = Newton-meter
– PNR = Part Number
– psi = pound per square inch
– rpm = revolution per minute
– SER = Serial Number
– SH or CW = clockwise
– SIH or CCW = counterclockwise
– VDC = volt direct current
– PB = Barometric pressure

Page INTRO-4
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

H. Revision
(1) When there is a change, each updating shows the detailed instructions about the
page number of the pages which must be replaced, added or removed.

I. Manufacturing
(1) The Equipment is manufactured by :

ZODIAC AEROTECHNICS
(OXYGEN SYSTEM EUROPE)
61, rue Pierre CURIE
CS20001
78373 PLAISIR CEDEX / FRANCE
Phone : +33 1 30 54 82 00
Fax : +33 1 30 55 71 61

(2) Product Support

(a) Phone : +33 970 830 830
(b) Email : zs.tac@zodiacaerospace.com
(3) Spare Parts Sales

ZODIAC AEROSPACE SERVICES EUROPE ZODIAC AEROSPACE U.K.

61, rue Pierre CURIE Unit 610, Avenue West
CS20001 Skyline 120
78373 PLAISIR CEDEX / FRANCE BRAINTREE - CM77, ENGLAND
Phone : +33 970 830 830 Phone : +33 970 830 830
Fax : +33 1 61 34 21 13 Fax: 44 (0) 1376 340 734
ZODIAC AEROSPACE SERVICES AMERICAS ZODIAC AEROSPACE SERVICES ASIA
4900 St. Joe Boulevard, 36, Loyang Drive
Building 200, Suite 400 SINGAPORE 508949
COLLEGE PARK, GA 30337 / USA Phone : +33 970 830 830
Phone : +33 970 830 830 Fax : +65 6579 2231
Fax : +1 800 879 0411
ZODIAC AEROSPACE SERVICES MIDDLE
EAST
Dubai Aviation City - Logistic City - Plot No:
DLC-CL-1WB14 & WB15
Dubai, P.O.Box 644324
Phone : +33 970 830 830
Fax : +971 2 57 58 482

Page INTRO-5
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

J. Recommended Repair Facilities

EUROPE
ZODIAC SERVICES EUROPE ZODIAC AEROSPACE UK
61, rue Pierre CURIE Unit 610, Avenue West
CS 20001 Skyline 120
78373 PLAISIR CEDEX / FRANCE BRAINTREE - CM77, ENGLAND
Phone : +33 1 61 34 23 23 Phone : +33 970 830 830
Fax : +33 1 61 34 21 13 Fax: 44 (0) 1376 340 734
USA ASIA
ZODIAC SERVICES AMERICAS ZODIAC SERVICES ASIA
4900 St. Joe Boulevard, 36, Loyang Drive
Building 200, Suite 400 SINGAPORE 508949
COLLEGE PARK, GA 30337 USA Phone : +65 6579 2230
Phone : +1 678 228 8153 Fax : +65 6579 2231
Fax : +1 800 879 0411
MIDDLE EAST
ZODIAC AEROSPACE SERVICES MIDDLE
EAST
Dubai Aviation City - Logistic City - Plot No:
DLC-CL-1WB14 & WB15
Dubai, P.O.Box 644324
Phone : +33 970 830 830
Fax : +971 2 57 58 482

Page INTRO-6
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

DESCRIPTION AND OPERATION

TASK 35-13-63-870-801-A01
1. GENERAL

SUBTASK 35-13-63-870-001-A01
A. Purpose
(Refer to Fig. 1)
(1) The Crew Oxygen Mask Regulator MC10-Series is an emergency breathing device
made for air crews that fly at high altitudes.
(2) This device gives protection to the flight crew against :
– The effects of depressurization
– Harmful gases
– Fumes.
(3) It can be used in conjunction with MXP210 Series smoke goggles and MXG Series
smoke goggles if the inflatable harness is equipped with a clip (1D-25) or (1H-25).
(4) It is used for respiratory protection and for the protection of the eyes.
(5) It gets a rated pressure (Refer to Table 1) through a hose coupling. You can put it
on your face with one hand in less than five seconds.
(6) This unit has several anti-mist devices.

SUBTASK 35-13-63-870-002-A01
B. Technical Data
Weight : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Refer to table 1
Full Dimensions : . . . . . . . . . . . . . . . . . . . . Refer to figure 2, and table 2

SUBTASK 35-13-63-870-003-A01
C. Special Data
Fluid : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Oxygen
Nominal pressure : . . . . . . . . . . . . . . . . . . . Refer to table 1
Maximum flowrate : . . . . . . . . . . . . . . . . . . 120 l/min NTPD
Maximum operating altitude : . . . . . . . . . Refer to table 1
Operation temperature : . . . . . . . . . . . . . . -15 to +55° C (5 to +131° F)
Readiness time : . . . . . . . . . . . . . . . . . . . . . Less than 5 secondes
(1) Table of the nominal pressure, weight and maximum operating altitude, TSO label
markings.

Page 1
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

MAXIMUM
NOMINAL PRESSURE WEIGHT OPERATING
TSO
ALTITUDE F.T.
PNR LABEL
LABEL
(area 1)* (area 2)* (area 3)* (area 4)* TYPE
psi MPa psi MPa Kg lb ft x 1000
MC10-02-01 60 0,41 85 0,58 0,499 1.10 40 1 NO
MC10-02-02 60 0,41 85 0,58 0,499 1.10 40 1 NO
MC10-02-03 60 0,41 85 0,58 0,499 1.10 40 1 NO
MC10-02-04 60 0,41 85 0,58 0,499 1.10 40 1 NO
MC10-02-05 60 0,41 85 0,58 0,499 1.10 40 1 NO
MC10-02-06 60 0,41 85 0,58 0,499 1.10 40 1 NO
MC10-02-07 60 0,41 85 0,58 0,499 1.10 40 1 NO
MC10-02-10 60 0,41 85 0,58 0,522 1.15 40 1 NO
MC10-02-22 60 0,41 85 0,58 0,522 1.15 40 1 NO
MC10-02-50 60 0,41 85 0,58 0,522 1.15 40 1 NO
MC10-02-54 60 0,41 85 0,58 0,522 1.15 40 1 NO
MC10-02-55 60 0,41 85 0,58 0,522 1.15 40 1 NO
MC10-02-69 60 0,41 85 0,58 0,499 1.10 40 1 NO
MC10-02-102 60 0,41 85 0,58 0,499 1.10 40 1 NO
MC10-02-104 60 0,41 85 0,58 0,522 1.15 40 1 NO
MC10-02-105 60 0,41 85 0,58 0,502 1.12 40 1 NO
MC10-02-106 60 0,41 85 0,58 0,499 1.10 40 1 NO
MC10-02-107 60 0,41 85 0,58 0,499 1.10 40 1 NO
MC10-02-108 60 0,41 85 0,58 0,499 1.10 40 1 NO
MC10-02-109 60 0,41 85 0,58 0,522 1.15 40 1 NO
MC10-02-112 60 0,41 85 0,58 0,499 1.10 40 1 NO
MC10-02-115 60 0,41 85 0,58 0,522 1.15 40 1 NO
MC10-02-116 60 0,41 85 0,58 0,499 1.10 40 1 NO
MC10-02-117 60 0,41 85 0,58 0,499 1.10 40 1 NO
MC10-02-121 60 0,41 85 0,58 0,522 1.15 40 1 NO
MC10-02-155 60 0,41 85 0,58 0,499 1.10 40 1 NO
MC10-02-169 60 0,41 85 0,58 0,544 1.20 40 1 NO
MC10-02-170 60 0,41 85 0,58 0,544 1.20 40 1 NO
MC10-02-171 60 0,41 85 0,58 0,499 1.10 40 1 NO
MC10-02-103 60 0,42 85 0,59 0,544 1.20 40 1 NO
MC10-02-114 60 0,42 85 0,59 0,522 1.15 40 1 NO

Page 2
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

MAXIMUM
NOMINAL PRESSURE WEIGHT OPERATING
TSO
ALTITUDE F.T.
PNR LABEL
LABEL
(area 1)* (area 2)* (area 3)* (area 4)* TYPE
psi MPa psi MPa Kg lb ft x 1000
MC10-02-60 60 0,42 85 0,59 0,526 1.16 40 NO NO
MC10-04-01 70 0,48 94 0,65 0,376 0.83 40 1 NO
MC10-04-02 70 0,48 94 0,65 0,367 0.81 40 1 NO
MC10-04-07 70 0,48 94 0,65 0,376 0.83 40 1 NO
MC10-04-21 70 0,48 94 0,65 0,376 0.83 40 1 NO
MC10-04-22 70 0,48 94 0,65 0,376 0.83 40 1 NO
MC10-04-27 70 0,48 94 0,65 0,376 0.83 40 1 NO
MC10-04-77 70 0,48 94 0,65 0,399 0.88 40 1 NO
MC10-04-101 70 0,48 94 0,65 0,376 0.83 40 1 NO
MC10-04-102 70 0,48 94 0,65 0,367 0.81 40 1 NO
MC10-04-105 70 0,48 94 0,65 0,499 1.10 40 1 NO
MC10-04-107 70 0,48 94 0,65 0,376 0.83 40 1 NO
MC10-04-109 70 0,48 94 0,65 0,376 0.83 40 1 NO
MC10-04-110 70 0,48 94 0,65 0,558 1.23 40 1 NO
MC10-04-111 70 0,48 94 0,65 0,531 1.17 40 1 NO
MC10-04-112 70 0,48 94 0,65 0,499 1.10 40 1 NO
MC10-04-115 70 0,48 94 0,65 0,499 1.10 40 1 NO
MC10-04-116 70 0,48 94 0,65 0,531 1.17 40 1 NO
MC10-04-121 70 0,48 94 0,65 0,376 0.83 40 1 NO
MC10-04-122 70 0,48 94 0,65 0,376 0.83 40 1 NO
MC10-04-127 70 0,48 94 0,65 0,376 0.83 40 1 NO
MC10-04-157 70 0,48 94 0,65 0,399 0.88 40 1 NO
MC10-04-159 70 0,48 94 0,65 0,399 0.88 40 1 NO
MC10-04-177 70 0,48 94 0,65 0,399 0.88 40 1 NO
MC10-05-04 50 0,34 90 0,62 0,363 0.80 40 1 NO
MC10-05-100 50 0,34 90 0,62 0,386 0.85 40 1 NO
MC10-05-101 50 0,34 90 0,62 0,513 0.113 40 1 NO
MC10–05–102 50 0,34 90 0,62 0,522 1.15 40 1 NO
MC10-05-104 50 0,34 90 0,62 0,363 0.80 40 1 NO
MC10-05-124 50 0,34 90 0,62 0,363 0.80 40 1 NO
MC10-05-152 50 0,34 90 0,62 0,522 1.15 40 1 NO

Page 3
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

MAXIMUM
NOMINAL PRESSURE WEIGHT OPERATING
TSO
ALTITUDE F.T.
PNR LABEL
LABEL
(area 1)* (area 2)* (area 3)* (area 4)* TYPE
psi MPa psi MPa Kg lb ft x 1000
MC10-06-00 60 0,42 85 0,59 0,499 1.10 40 1 NO
MC10-06-01 60 0,42 85 0,59 0,499 1.10 40 1 NO
MC10-06-03 60 0,42 85 0,59 0,499 1.10 40 1 NO
MC10-06-20 60 0,42 85 0,59 0,499 1.10 40 1 NO
MC10-06-21 60 0,42 85 0,59 0,499 1.10 40 1 NO
MC10-06-23 60 0,42 85 0,59 0,513 1.13 40 1 NO
MC10-06-100 60 0,42 85 0,59 0,499 1.10 40 1 NO
MC10-06-101 60 0,42 85 0,59 0,499 1.10 40 1 NO
MC10-06-102 60 0,42 85 0,59 0,499 1.10 40 1 NO
MC10-06-104 60 0,42 85 0,59 0,499 1.10 40 1 NO
MC10-06-105 60 0,42 85 0,59 0,499 1.10 40 1 NO
MC10-06-106 60 0,42 85 0,59 0,544 1.20 40 1 NO
MC10-06-120 60 0,42 85 0,59 0,499 1.10 40 1 NO
MC10-06-121 60 0,42 85 0,59 0,499 1.10 40 1 NO
MC10-06-124 60 0,42 85 0,59 0,499 1.10 40 1 NO
MC10-06-125 60 0,42 85 0,59 0,499 1.10 40 1 NO
MC10-06-126 60 0,42 85 0,59 0,499 1.10 40 1 NO
MC10-06-127 60 0,42 85 0,59 0,657 1.45 40 1 NO
MC10-06-128 60 0,42 85 0,59 0,743 1.64 40 1 NO
MC10-08-00 50 0,34 90 0,62 0,376 0.83 43 2 NO
MC10-08-01 60 0,42 85 0,59 0,558 1.23 45 2 YES
MC10-08-02 60 0,42 85 0,59 0,590 1.30 45 2 YES
MC10-08-05 70 0,48 94 0,65 0,376 0.83 43 2 NO
MC10-08-09 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-08-13 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-08-25 70 0,48 94 0,65 0,376 0.83 43 2 NO
MC10-08-100 50 0,34 90 0,62 0,376 0.83 43 2 NO
MC10-08-102 60 0,42 85 0,59 0,590 1.30 45 2 YES
MC10-08-103 60 0,42 85 0,59 0,558 1.23 45 2 YES
MC10-08-104 60 0,42 85 0,59 0,558 1.23 45 2 YES
MC10-08-106 60 0,42 85 0,59 0,558 1.23 45 2 NO

Page 4
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

MAXIMUM
NOMINAL PRESSURE WEIGHT OPERATING
TSO
ALTITUDE F.T.
PNR LABEL
LABEL
(area 1)* (area 2)* (area 3)* (area 4)* TYPE
psi MPa psi MPa Kg lb ft x 1000
MC10-08-107 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-08-108 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-08-109 60 0,42 85 0,59 0,499 1.10 45 2 YES
MC10-08-110 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-08-111 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-08-112 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-08-114 60 0,42 85 0,59 0,558 1.23 45 2 YES
MC10-08-116 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-08-120 50 0,34 90 0,62 0,376 0.83 43 2 NO
MC10-08-123 60 0,42 85 0,59 0,558 1.23 45 2 YES
MC10-08-124 60 0,42 85 0,59 0,558 1.23 45 2 YES
MC10-08-126 60 0,42 85 0,59 0,558 1.23 45 2 NO
MC10-08-127 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-08-128 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-08-209 60 0,42 85 0,59 0,499 1.10 45 2 YES
MC10-09-00 75 0,52 94 0,65 0,499 1.10 40 1 NO
MC10-09-01 75 0,52 94 0,65 0,499 1.10 40 1 NO
MC10-10-100 60 0,42 80 0,55 0,476 1.05 45 2 NO
MC10-10-101 60 0,42 80 0,55 0,526 1.16 45 2 NO
MC10-10-102 60 0,42 80 0,55 0,476 1.05 45 2 NO
MC10-10-103 60 0,42 80 0,55 0,476 1.05 45 2 NO
MC10-10-104 60 0,42 80 0,55 0,476 1.05 45 2 NO
MC10-12-100 60 0,42 80 0,55 0,476 1.05 45 2 NO
MC10-12-101 60 0,42 80 0,55 0,499 1.10 45 2 NO
MC10-12-150 60 0,42 80 0,55 0,490 1.08 45 2 NO
MC10-12-151 60 0,42 80 0,55 0,553 1.22 45 2 NO
MC10-12-152 60 0,42 80 0,55 0,598 1.32 45 2 NO
MC10-13-02 65 0,45 95 0,66 0,499 1.10 45 3** NO
MC10-13-03 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-13-04 65 0,45 95 0,66 0,499 1.10 45 3** NO
MC10-13-05 65 0,45 95 0,66 0,499 1.10 45 3** NO

Page 5
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

MAXIMUM
NOMINAL PRESSURE WEIGHT OPERATING
TSO
ALTITUDE F.T.
PNR LABEL
LABEL
(area 1)* (area 2)* (area 3)* (area 4)* TYPE
psi MPa psi MPa Kg lb ft x 1000
MC10-13-102 65 0,45 95 0,66 0,499 1.10 45 3** NO
MC10-13-103 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-13-104 65 0,45 95 0,66 0,499 1.10 45 3** NO
MC10-13-114 65 0,45 95 0,66 0,499 1.10 45 3** NO
MC10-13-150 65 0,45 95 0,66 0,499 1.10 45 3** NO
MC10-13-151 65 0,45 95 0,66 0,499 1.10 45 2 NO
MC10-14-00 60 0,42 80 0,55 0,499 1.10 43 2 NO
MC10-14-01 60 0,42 80 0,55 0,499 1.10 43 2 NO
MC10-14-02 60 0,42 80 0,55 0,499 1.10 43 2 NO
MC10-14-20 60 0,42 80 0,55 0,499 1.10 43 2 NO
MC10-14-21 60 0,42 80 0,55 0,499 1.10 43 2 NO
MC10-14-22 60 0,42 80 0,55 0,499 1.10 43 2 NO
MC10-14-100 60 0,42 80 0,55 0,499 1.10 43 2 NO
MC10-14-101 60 0,42 80 0,55 0,499 1.10 43 2 NO
MC10-14-102 60 0,42 80 0,55 0,499 1.10 43 2 NO
MC10-14-103 60 0,42 80 0,55 0,499 1.10 43 2 NO
MC10-14-104 60 0,42 80 0,55 0,508 1.12 43 2 NO
MC10-14-120 60 0,42 80 0,55 0,499 1.10 43 2 NO
MC10-14-121 60 0,42 80 0,55 0,499 1.10 43 2 NO
MC10-14-122 60 0,42 80 0,55 0,499 1.10 43 2 NO
MC10-14-123 60 0,42 80 0,55 0,499 1.10 43 2 NO
MC10-14-124 60 0,42 80 0,55 0,508 1.12 43 2 NO
MC10-14-151 60 0,42 80 0,55 0,499 1.10 43 2 NO
MC10-15-01 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-15-02 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-15-03 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-15-04 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-15-05 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-15-07 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-15-09 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-15-10 60 0,42 85 0,59 0,499 1.10 45 2 NO

Page 6
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

MAXIMUM
NOMINAL PRESSURE WEIGHT OPERATING
TSO
ALTITUDE F.T.
PNR LABEL
LABEL
(area 1)* (area 2)* (area 3)* (area 4)* TYPE
psi MPa psi MPa Kg lb ft x 1000
MC10-15-11 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-15-12 60 0,42 85 0,59 0,499 1.10 41 2 NO
MC10-15-13 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-15-17 60 0,42 85 0,59 0,499 1.10 41 2 NO
MC10-15-18 60 0,42 85 0,59 0,499 1.10 41 2 NO
MC10-15-101 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-15-102 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-15-104 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-15-105 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-15-107 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-15-108 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-15-109 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-15-113 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-15-114 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-15-115 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-15-116 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-15-117 60 0,42 85 0,59 0,499 1.10 41 2 NO
MC10-15-118 60 0,42 85 0,59 0,499 1.10 41 2 NO
MC10-15-119 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-15-120 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-15-121 60 0,42 85 0,59 0,522 1.15 45 2 NO
MC10-15-122 60 0,42 85 0,59 0,476 1.05 45 2 NO
MC10-15-151 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-15-152 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-15-155 60 0,42 85 0,59 0,499 1.10 45 2 NO
MC10-15-157 60 0,42 85 0,59 0,522 1.15 45 2 NO
MC10-15-158 60 0,42 85 0,59 0,522 1.15 45 2 NO
MC10-15-159 60 0,42 85 0,59 0,522 1.15 45 2 NO
MC10-15-166 60 0,42 85 0,59 0,522 1.15 45 2 NO
MC10-15-167 60 0,42 85 0,59 0,522 1.15 41 2 NO
MC10-15-168 60 0,42 85 0,59 0,522 1.15 41 2 NO

Page 7
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

MAXIMUM
NOMINAL PRESSURE WEIGHT OPERATING
TSO
ALTITUDE F.T.
PNR LABEL
LABEL
(area 1)* (area 2)* (area 3)* (area 4)* TYPE
psi MPa psi MPa Kg lb ft x 1000
MC10-15-170 60 0,42 85 0,59 0,522 1.15 45 2 NO
MC10-15-171 60 0,42 85 0,59 0,522 1.15 45 2 NO
MC10-15-176 60 0,42 85 0,59 0,522 1.15 45 2 NO
MC10-16-100 50 0,34 90 0,62 0,522 1.15 45 2 NO
MC10-16-101 50 0,34 90 0,62 0,522 1.15 45 2 NO
MC10-16-103 50 0,34 90 0,62 0,522 1.15 45 2 NO
MC10-16-104 50 0,34 90 0,62 0,522 1.15 45 2 NO
MC10-16-105 50 0,34 90 0,62 0,499 1.10 45 2 NO
MC10-16-150 50 0,34 90 0,62 0,544 1.20 45 2 NO
MC10-16-151 50 0,34 90 0,62 0,544 1.20 45 2 NO
MC10-16-152 50 0,34 90 0,62 0,544 1.20 45 2 NO
MC10-16-153 50 0,34 90 0,62 0,544 1.20 45 2 NO
MC10-17-00 60 0,42 85 0,59 0,499 1.10 40 1 YES
MC10-17-100 60 0,42 85 0,59 0,499 1.10 40 1 YES
MC10-17-101 60 0,42 85 0,59 0,499 1.10 40 1 NO
MC10-19-00 60 0,42 85 0,59 0,522 1.15 40 1 YES
MC10-19-01 60 0,42 85 0,59 0,558 1.23 40 1 YES
MC10-19-02 60 0,42 85 0,59 0,499 1.10 40 1 NO
MC10-19-03 60 0,42 85 0,59 0,558 1.23 40 1 YES
MC10-19-101 60 0,42 85 0,59 0,558 1.23 40 1 YES
MC10-19-102 60 0,42 85 0,59 0,499 1.10 40 1 NO
MC10-19-103 60 0,42 85 0,59 0,544 1.20 40 1 NO
MC10-19-104 60 0,42 85 0,59 0,558 1.23 40 1 YES
MC10-19-151 60 0,42 85 0,59 0,558 1.23 40 1 YES
MC10-20-00 60 0,42 85 0,59 0,522 1.15 43 2 NO
MC10-22-00 60 0,42 85 0,59 0,590 1.30 40 1 YES
MC10-22-01 60 0,42 85 0,59 0,590 1.30 40 1 YES
MC10-22-100 60 0,42 85 0,59 0,590 1.30 40 1 YES
MC10-22-101 60 0,42 85 0,59 0,590 1.30 40 1 YES
MC10-25-00 60 0,42 85 0,59 0,499 1.10 40 1 YES
MC10-25-01 60 0,42 85 0,59 0,558 1.23 40 1 YES

Page 8
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

MAXIMUM
NOMINAL PRESSURE WEIGHT OPERATING
TSO
ALTITUDE F.T.
PNR LABEL
LABEL
(area 1)* (area 2)* (area 3)* (area 4)* TYPE
psi MPa psi MPa Kg lb ft x 1000
MC10-25-02 60 0,42 85 0,59 0,558 1.23 40 1 YES
MC10-25-04 60 0,42 85 0,59 0,499 1.10 40 1 YES
MC10-25-101 60 0,42 85 0,59 0,558 1.23 40 1 YES
MC10-25-102 60 0,42 85 0,59 0,499 1.10 40 1 YES
MC10-25-103 60 0,42 85 0,59 0,558 1.23 40 1 YES
MC10-25-104 60 0,42 85 0,59 0,499 1.10 40 1 YES
MC10-25-105 60 0,42 85 0,59 0,558 1.23 40 1 YES
MC10-25-106 60 0,42 85 0,59 0,499 1.10 40 1 YES
MC10-25-107 60 0,42 85 0,59 0,530 1.17 40 1 YES
MC10-25-108 60 0,42 85 0,59 0,363 0.80 40 1 NO
MC10-25-110 60 0,42 85 0,59 0,558 1.23 40 1 YES
MC10-25-124 60 0,42 85 0,59 0,499 1.10 40 1 YES
MC10-25-154 60 0,42 85 0,59 0,535 1.18 40 1 YES
MC10-25-158 60 0,42 85 0,59 0,535 1.18 40 1 YES
MC10-25-159 60 0,42 85 0,59 0,535 1.18 40 1 YES
MC10-25-204 60 0,42 85 0,59 0,499 1.10 40 1 YES
MC10-25-110 60 0,42 85 0,59 0,539 1.19 40 1 YES
MC10-32-101 60 0,42 85 0,59 0,558 1.23 40 1 NO
MC10-32-102 60 0,42 85 0,59 0,558 1.23 40 1 NO
MC10-32-103 60 0,42 85 0,59 0,558 1.23 40 1 NO
MC10-35-101 70 0,48 94 0,65 0,544 1.20 41.5 2 NO
MC10-35-102 70 0,48 94 0,65 0,544 1.20 41.5 2 NO

Table 1 / NOMINAL PRESSURE, WEIGHT AND MAXIMUM OPERATING ALTITUDE TSO

LABEL MARKINGS

* Refer to “ASSEMBLY” figure 7004

** The type 3 label is not a TSO label
(2) Table of the overall dimensions

Page 9
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TYPE OF INFLATABLE HARNESS

MXH15-2
MXH15-22
MXH14-1 MXH16 MXH19
MXH15-23 MXH20 MXH21-1 MXH61
MXH14-21 MXH16-20 MXH19-20 MXH22–30
MXH15-32 MXH20-1 MXH21-31 MXH61–30
MXH14-31 MXH16-30 MXH19-30
MXH15-33
MXH15-34
A mm 140 ± 15 140 ± 15 140 ± 15 140 ± 15 140 ± 15 140 ± 15 140 ± 15 140 ± 15
in 5.5 ± 60 5.5 ± 60 5.5 ± 60 5.5 ± 60 5.5 ± 60 5.5 ± 60 5.5 ± 60 5.5 ± 60
B mm 100 ± 10 100 ± 10 100 ± 10 100 ± 10 100 ± 10 100 ± 10 100 ± 10 100 ± 10
in 4 ± .40 4 ± .40 4 ± .40 4 ± .40 4 ± .40 4 ± .40 4 ± .40 4 ± .40
C mm 77 77 77 77 77 77 77 77
in 3.03 3.03 3.03 3.03 3.03 3.03 3.03 3.03
D mm 49 49 49 49 49 49 49 49
in 1.92 1.92 1.92 1.92 1.92 1.92 1.92 1.92
E mm 105 ± 5 105 ± 5 105 ± 5 105 ± 5 105 ± 5 105 ± 5 105 ± 5 105 ± 5
in 4.1 ±.20 4.1 ±.20 4.1 ±.20 4.1 ±.20 4.1 ±.20 4.1 ±.20 4.1 ±.20 4.1 ±.20
K* mm 800 ± 30 800 -20/+30 830 ± 30 890 ± 30 780 -20/+30 830 ± 30 950 ± 30 790 ± 30
in 31.1 ± 1.2 31.5 -.8/+1.2 32.7 ± 1.2 35 ± 1.2 30.7 -.8/+1.2 32.7 ± 1.2 37.4 ± 1.2 31.1 ± 1.2
L* mm 860 ± 30 860 -20/+30 880 ± 30 880 ± 30 840 -20/+30 880 ± 30 980 ± 30 830 ± 30
in 33.9 ± 1.2 33.9 -.8/+1.2 34.6 ± 1.2 34.6 ± 1.2 33.1 -.8/+1.2 34.6 ± 1.2 38.6 ± 1.2 32.7 ± 1.2
M* mm 130 140 ± 5 140 ± 5 140 ± 5 150 150 150 170
in 5.1 5.5 ± .2 5.5 ± .2 5.5 ± .2 5.9 5.9 5.9 6.9
N* mm 140 150 ± 5 150 ± 5 150 ± 5 160 160 160 160
in 5.5 5.9 ± .2 5.9 ± .2 5.9 ± .2 6.3 6.3 6.3 6.3
O* mm 70 70 ± 5 70 ± 5 70 ± 5 70 70 70 70
in 2.8 2.8 ± .2 2.8 ± .2 2.8 ± .2 2.8 2.8 2.8 2.8
P* mm 70 70 ± 5 70 ± 5 70 ± 5 70 70 70 70
in 2.8 2.8 ± .2 2.8 ± .2 2.8 ± .2 2.8 2.8 2.8 2.8
Q* mm - - - - 40 40 40 20
in - - - - 1.6 1.6 1.6 0.8
R* mm - - - - 40 40 40 20
in - - - - 1.6 1.6 1.6 0.8
S* mm - - - - 70 80 80 60
in - - - - 2.8 3.1 3.1 2.4
T* mm - - - - 90 100 100 80
in - - - - 3.5 3.9 3.9 3.1

Table 2 / OVERALL DIMENSIONS

* Harness inflated at 0,50 MPa (72.5 psi)

Page 10
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TASK 35-13-63-870-802-A01
2. DESCRIPTION

SUBTASK 35-13-63-870-004-A01
A. General description
(1) Breakdown
(a) This equipment has five sub-assemblies (Refer to table 3)
– An inflatable harness MXH Series (refer to CMM 35-13-71),
– A mask assembly MXM Series (refer to CMM 35-13-71),
– A microphone kit MXA Series (refer to CMM 35-13-71),
– An oxygen regulator RMC1000 Series / RMC1100 Series (refer to
CMM 35-13-70), or RMC2000 Series / RMC2100 Series (refer to CMM
35-13-74)
– A supply hose assembly DTS4XXX Series (refer to CMM 35-13-72).
(b) Table of breakdown

SUPPLY WIRING
MASK MICROPHONE OXYGEN DIAGRAM
PNR HARNESS HOSE
ASSEMBLY KIT REGULATOR
ASSEMBLY M L C
MXH15-2 or
RMC1018-2 or
MC10-02-01 MXH15-22 or MXM22 MXA1035 DTS4030 11 A 2
RMC2018-2
MXH15-32
MXH15-2 or
RMC1018-2 or
MC10-02-02 MXH15-22 or MXM22 MXA1035 DTS4047 11 A 2
RMC2018-2
MXH15-32
MXH15-2 or
MXA1006 or RMC1018-2 or
MC10-02-03 MXH15-22 or MXM22 DTS4046 6 A 2
MXA1051 RMC2018-2
MXH15-32
MXH15-2 or
RMC1018 or
MC10-02-04 MXH15-22 or MXM22 MXA1031 DTS4048 16 A 2
RMC2018
MXH15-32
MXH15-2 or
RMC1018-2 or
MC10-02-05 MXH15-22 or MXM22 MXA1035 DTS4051 11 A 2
RMC2018-2
MXH15-32
MXH15-2 or
RMC1018-2 or
MC10-02-06 MXH15-22 or MXM22 MXA1035 DTS4021 11 A 2
RMC2018-2
MXH15-32
MXH15-2 or
RMC1018 or
MC10-02-07 MXH15-22 or MXM22 MXA1035 DTS4021 11 A 21
RMC2018
MXH15-32
MXH15-2 or
RMC1018 or
MC10-02-10 MXH15-22 or MXM22 MXA1042 DTS4046 11 A 2
RMC2018
MXH15-32
*: Without
C : Connector / L : Line / M : Microphone

Page 11
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

SUPPLY WIRING
MASK MICROPHONE OXYGEN DIAGRAM
PNR HARNESS HOSE
ASSEMBLY KIT REGULATOR
ASSEMBLY M L C
MXH15-2 or
RMC1018-2 or
MC10-02-22 MXH15-22 or MXM23 MXA1035 DTS4142 11 A 2
RMC2018-2
MXH15-32
MXH21-1 or RMC1018-2 or
MC10-02-50 MXM22 MXA1051 DTS4102 6 A 2
MXH21-31 RMC2018-2
MXH21-1 or RMC1018-2 or
MC10-02-54 MXM22 MXA1016 DTS4063 5 A 3
MXH21-31 RMC2018-2
MXH21-1 or RMC1018-2 or
MC10-02-55 MXM22 MXA1035 DTS4051 11 A 2
MXH21-31 RMC2018-2
MXH21-1 or RMC1018 or
MC10-02-69 MXM22 MXA1038 DTS4119 8 A 8
MXH21-31 RMC2018
MXH15-2 or
RMC1018-2 or
MC10-02-102 MXH15-22 or MXM23 MXA1035 DTS4047 11 A 2
RMC2018-2
MXH15-32
MXH15-2 or
RMC1018 or
MC10-02-104 MXH15-22 or MXM23 MXA1031 DTS4048 16 A 2
RMC2018
MXH15-32
MXH15-2 or
RMC1018-2 or
MC10-02-105 MXH15-22 or MXM23 MXA1042 DTS4051 11 A 2
RMC2018-2
MXH15-32
MXH15-2 or
RMC1018 or
MC10-02-106 MXH15-22 or MXM23 MXA1035 DTS4020 11 A 2
RMC2018
MXH15-32
MXH15-2 or
MXA1006 or RMC1018-2 or
MC10-02-107 MXH15-22 or MXM23 DTS4030 6 A 2
MXA1051 RMC2018-2
MXH15-32
MXH15-2 or
RMC1018-2 or
MC10-02-108 MXH15-22 or MXM23 MXA1045 DTS4020 13 A 2
RMC2018-2
MXH15-32
MXH15-2 or
RMC1018-2 or
MC10-02-109 MXH15-22 or MXM23 MXA1016 DTS4046 5 A 2
RMC2018-2
MXH15-32
MXH15-2 or
MXA1006 or RMC1018 or
MC10-02-112 MXH15-22 or MXM23 DTS4029 6 A 2
MXA1051 RMC2018
MXH15-32
MXH16 or
RMC1018-2 or
MC10-02-115 MXH16-20 or MXM23 MXA1042 DTS4025 11 A 2
RMC2018-2
MXH16-30
MXH15-2 or
RMC1018-2 or
MC10-02-116 MXH15-22 or MXM23 MXA1042 DTS4021 11 A 2
RMC2018-2
MXH15-32
MXH15-2 or
RMC1018 or
MC10-02-117 MXH15-22 or MXM23 MXA1042 DTS4021 11 A 2
RMC2018
MXH15-32
*: Without
C : Connector / L : Line / M : Microphone

Page 12
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

SUPPLY WIRING
MASK MICROPHONE OXYGEN DIAGRAM
PNR HARNESS HOSE
ASSEMBLY KIT REGULATOR
ASSEMBLY M L C
MXH16 or
RMC1018-2 or
MC10-02-121 MXH16-20 or MXM23 MXA1016 DTS4063 5 A 3
RMC2018-2
MXH16-30
MXH21-1 or RMC1018-2 or
MC10-02-155 MXM23 MXA1042 DTS4051 11 A 2
MXH21-31 RMC2018-2
MXH21-1 or RMC1018-2 or
MC10-02-169 MXM23 MXA1050 DTS4024 10 A 3
MXH21-31 RMC2018-2
MXH20-1 or
RMC1018 or
MC10-02-170 MXH61 or MXM23 MXA1042 DTS4032 11 A 1
RMC2018
MXH21-31
MXH15-2 or
RMC1018 or
MC10-02-171 MXH15-22 or MXM23 MXA1035 DTS4029 11 A 2
RMC2018
MXH15-32
MC10-02-103 MXH15-32 MXM23 MXA1051 RMC2018-2 DTS4046 6 A 2
MC10-02-114 MXH15-32 MXM23 MXA1046 RMC2018-2 DTS4100 * * *
MC10-02-60 MXH22-30 MXM23 MXA1012 RMC2118-3 DTS4181 2 A 9
MXH15-2 or
RMC1008 or
MC10-04-01 MXH15-22 or MXM22 MXA1016 DTS4008 5 A 1
RMC2008
MXH15-32
MXH15-2 or
RMC1008 or
MC10-04-02 MXH15-22 or MXM22 MXA1031 DTS4008 16 A 1
RMC2008
MXH15-32
MXH15-2 or
RMC1008 or
MC10-04-07 MXH15-22 or MXM22 MXA1042 DTS4008 11 A 1
RMC2008
MXH15-32
MXH15-2 or
RMC1008 or
MC10-04-21 MXH15-22 or MXM22 MXA1016 DTS4008 5 A 1
RMC2008
MXH15-32
MXH15-2 or
RMC1008 or
MC10-04-22 MXH15-22 or MXM22 MXA1031 DTS4008 16 A 1
RMC2008
MXH15-32
MXH15-2 or
RMC1008 or
MC10-04-27 MXH15-22 or MXM22 MXA1042 DTS4008 11 A 1
RMC2008
MXH15-32
MXH21-1 or RMC1008 or
MC10-04-77 MXM22 MXA1042 DTS4008 11 A 1
MXH21-31 RMC2008
MXH15-2 or
RMC1008 or
MC10-04-101 MXH15-22 or MXM23 MXA1016 DTS4008 5 A 1
RMC2008
MXH15-32
MXH15-2 or
RMC1008 or
MC10-04-102 MXH15-22 or MXM23 MXA1031 DTS4008 16 A 1
RMC2008
MXH15-32
*: Without
C : Connector / L : Line / M : Microphone

Page 13
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

SUPPLY WIRING
MASK MICROPHONE OXYGEN DIAGRAM
PNR HARNESS HOSE
ASSEMBLY KIT REGULATOR
ASSEMBLY M L C
MXH15-2 or
RMC1008-1 or
MC10-04-105 MXH15-22 or MXM23 MXA1016 DTS4035 5 A 1
RMC2008-1
MXH15-32
MXH15-2 or
RMC1008 or
MC10-04-107 MXH15-22 or MXM23 MXA1042 DTS4008 11 A 1
RMC2008
MXH15-32
MXH15-2 or
RMC1008 or
MC10-04-109 MXH15-22 or MXM23 MXA1045 DTS4008 13 A 1
RMC2008
MXH15-32
MXH15-2 or
RMC1008-1 or
MC10-04-110 MXH15-22 or MXM23 MXA1016 DTS4062 5 A 1
RMC2008-1
MXH15-32
MXH15-2 or
RMC1008-2 or
MC10-04-111 MXH15-22 or MXM23 MXA1045 DTS4074 13 A 3
RMC2008-2
MXH15-32
MXH15-2 or
RMC1008 or
MC10-04-112 MXH15-22 or MXM23 MXA1042 DTS4035 11 A 1
RMC2008
MXH15-32
MXH15-2 or
RMC1008-1 or
MC10-04-115 MXH15-22 or MXM23 MXA1042 DTS4035 11 A 1
RMC2008-1
MXH15-32
MXH15-2 or
RMC1008-2 or
MC10-04-116 MXH15-22 or MXM23 MXA1016 DTS4117 5 A 2
RMC2008-2
MXH15-32
MXH15-2 or
RMC1008 or
MC10-04-121 MXH15-22 or MXM23 MXA1016 DTS4008 5 A 1
RMC2008
MXH15-32
MXH15-2 or
RMC1008 or
MC10-04-122 MXH15-22 or MXM23 MXA1031 DTS4008 16 A 1
RMC2008
MXH15-32
MXH15-2 or
RMC1008 or
MC10-04-127 MXH15-22 or MXM23 MXA1042 DTS4008 11 A 1
RMC2008
MXH15-32
MXH21-1 or RMC1008 or
MC10-04-157 MXM23 MXA1042 DTS4008 11 A 1
MXH21-31 RMC2008
MXH21-1 or RMC1008 or
MC10-04-159 MXM23 MXA1045 DTS4008 13 A 1
MXH21-31 RMC2008
MXH21-1 or RMC1008 or
MC10-04-177 MXM23 MXA1042 DTS4008 11 A 1
MXH21-31 RMC2008
MXH15-2 or
MXA1018 or RMC1006 or
MC10-05-04 MXH15-22 or MXM22 DTS4012 5 A 1
MXA1016 RMC2006
MXH15-32
MXH16 or RMC1006 or
MC10-05-100 MXH16-20 or MXM23 MXA1012 RMC1106 or DTS4069 2 A 1
MXH16-30 RMC2106
*: Without
C : Connector / L : Line / M : Microphone

Page 14
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

SUPPLY WIRING
MASK MICROPHONE OXYGEN DIAGRAM
PNR HARNESS HOSE
ASSEMBLY KIT REGULATOR
ASSEMBLY M L C
MXH16 or
RMC1006 or
MC10-05-101 MXH16-20 or MXM23 MXA1042 DTS4029 11 A 2
RMC2006
MXH16-30
MXH16 or
RMC1006 or
MC10–05–102 MXH16-20 or MXM23 MXA1016 DTS4029 5 A 2
RMC2006
MXH16-30
MXH15-2 or
MXA1018 or RMC1006 or
MC10-05-104 MXH15-22 or MXM23 DTS4012 5 A 1
MXA1016 RMC2006
MXH15-32
MXH15-2 or
MXA1018 or RMC1006 or
MC10-05-124 MXH15-22 or MXM23 DTS4012 5 A 1
MXA1016 RMC2006
MXH15-32
MXH21-1 or RMC1006 or
MC10-05-152 MXM23 MXA1016 DTS4029 5 A 2
MXH21-31 RMC2006
MXH15-2 or
MXA1006 or RMC1018 or
MC10-06-00 MXH15-22 or MXM22 DTS4010 6 A 1
MXA1051 RMC2018
MXH15-32
MXH15-2 or
MXA1006 or RMC1018-2 or
MC10-06-01 MXH15-22 or MXM22 DTS4021 6 A 2
MXA1051 RMC2018-2
MXH15-32
MXH15-2 or
RMC1018-2 or
MC10-06-03 MXH15-22 or MXM22 MXA1046 DTS4021 7 A 2
RMC2018-2
MXH15-32
MXH15-2 or
MXA1006 or RMC1018 or
MC10-06-20 MXH15-22 or MXM22 DTS4010 6 A 1
MXA1051 RMC2018
MXH15-32
MXH15-2 or
RMC1018-2 or
MC10-06-21 MXH15-22 or MXM22 MXA1051 DTS4021 6 A 2
RMC2018-2
MXH15-32
MXH15-2 or
RMC1018-2 or
MC10-06-23 MXH15-22 or MXM22 MXA1046 DTS4021 7 A 2
RMC2018-2
MXH15-32
MXH15-2 or
MXA1006 or RMC1018 or
MC10-06-100 MXH15-22 or MXM23 DTS4010 6 A 1
MXA1051 RMC2018
MXH15-32
MXH15-2 or
MXA1006 or RMC1018-2 or
MC10-06-101 MXH15-22 or MXM23 DTS4021 6 A 2
MXA1051 RMC2018-2
MXH15-32
MXH15-2 or
MXA1006 or RMC1018-2 or
MC10-06-102 MXH15-22 or MXM23 DTS4054 6 A 5
MXA1051 RMC2018-2
MXH15-32
MXH15-2 or
MXA1006 or RMC1018 or
MC10-06-104 MXH15-22 or MXM23 DTS4071 6 A 5
MXA1051 RMC2018
MXH15-32
*: Without
C : Connector / L : Line / M : Microphone

Page 15
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

SUPPLY WIRING
MASK MICROPHONE OXYGEN DIAGRAM
PNR HARNESS HOSE
ASSEMBLY KIT REGULATOR
ASSEMBLY M L C
MXH15-2 or
MXA1006 or RMC1018-2 or
MC10-06-105 MXH15-22 or MXM23 DTS4103 6 A 14
MXA1051 RMC2018-2
MXH15-32
MXH19 or
RMC1018-2 or
MC10-06-106 MXH19-20 or MXM23 MXA1044 DTS4122 3 A 4
RMC2018-2
MXH19-30
MXH15-2 or
MXA1006 or RMC1018 or
MC10-06-120 MXH15-22 or MXM23 DTS4010 6 A 1
MXA1051 RMC2018
MXH15-32
MXH15-2 or
MXA1006 or RMC1018-2 or
MC10-06-121 MXH15-22 or MXM23 DTS4021 6 A 2
MXA1051 RMC2018-2
MXH15-32
MXH15-2 or
MXA1006 or RMC1018 or
MC10-06-124 MXH15-22 or MXM23 DTS4071 6 A 5
MXA1051 RMC2018
MXH15-32
MXH15-2 or
RMC1018-2 or
MC10-06-125 MXH15-22 or MXM23 MXA1054 DTS4021 30 A 2
RMC2018-2
MXH15-32
MXH15-2 or
RMC1018-2 or
MC10-06-126 MXH15-22 or MXM23 MXA1051 DTS4070 6 A 2
RMC2018-2
MXH15-32
MC10-06-127 MXH15-32 MXM23 MXA1054 RMC2018-2 DTS4022 30 A 2
MC10-06-128 MXH15-32 MXM23 MXA1054 RMC2018-2 DTS4023 30 A 2
MXH15-2 or
MXA1018 or RMC1007 or
MC10-08-00 MXH15-22 or MXM22 DTS4012 5 A 1
MXA1016 RMC2007
MXH15-32
MXH15-2 or
RMC1007-1 or
MC10-08-01 MXH15-22 or MXM22 MXA1016 DTS4032 5 A 1
RMC2007-1
MXH15-32
MXH15-2 or
RMC1007-1 or
MC10-08-02 MXH15-22 or MXM22 MXA1044 DTS4005 3 A 1
RMC2007-1
MXH15-32
MXH15-2 or
RMC1007-3 or
MC10-08-05 MXH15-22 or MXM22 MXA1042 DTS4008 11 A 1
RMC2007-3
MXH15-32
MXH15-2 or
RMC1007-1 or
MC10-08-09 MXH15-22 or MXM22 MXA1016 DTS4032 5 A 1
RMC2007-1
MXH15-32
MXH15-2 or
RMC1007-1 or
MC10-08-13 MXH15-22 or MXM22 MXA1042 DTS4021 11 A 2
RMC2007-1
MXH15-32
MXH15-2 or
RMC1007-3 or
MC10-08-25 MXH15-22 or MXM22 MXA1042 DTS4008 11 A 1
RMC2007-3
MXH15-32
*: Without
C : Connector / L : Line / M : Microphone

Page 16
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

SUPPLY WIRING
MASK MICROPHONE OXYGEN DIAGRAM
PNR HARNESS HOSE
ASSEMBLY KIT REGULATOR
ASSEMBLY M L C
MXH15-2 or
MXA1018 or RMC1007 or
MC10-08-100 MXH15-22 or MXM23 DTS4012 5 A 1
MXA1016 RMC2007
MXH15-32
MXH15-2 or RMC1007-1 or
MC10-08-102 MXM23 MXA1044 DTS4005 3 A 1
MXH15-22 RMC2007-1
MXH15-2 or RMC1007-1 or
MC10-08-103 MXM23 MXA1016 DTS4032 5 A 1
MXH15-22 RMC2007-1
MXH15-2 or
RMC1007-1 or
MC10-08-104 MXH15-22 or MXM23 MXA1042 DTS4029 11 A 2
RMC2007-1
MXH15-32
MXH14-1 or RMC1007-1 or
MC10-08-106 MXM23 MXA1042 DTS4001 11 A 6
MXH14-31 RMC2007-1
MXH15-2 or RMC1007-1 or
MC10-08-107 MXM23 MXA1016 DTS4035 5 A 1
MXH15-22 RMC2007-1
MXH15-2 or
RMC1007-1 or
MC10-08-108 MXH15-22 or MXM23 MXA1031 DTS4065 16 A 4
RMC2007-1
MXH15-32
MXH15-2 or RMC1007-1 or
MC10-08-109 MXM23 MXA1016 DTS4032 5 A 1
MXH15-22 RMC2007-1
MXH15-2 or
MXA1006 or RMC1007-5 or
MC10-08-110 MXH15-22 or MXM23 DTS4025 6 A 2
MXA1051 RMC2007-5
MXH15-32
MXH15-2 or
RMC1007-1 or
MC10-08-111 MXH15-22 or MXM23 MXA1042 DTS4065 11 A 4
RMC2007-1
MXH15-32
MXH15-2 or
RMC1007-1 or
MC10-08-112 MXH15-22 or MXM23 MXA1042 DTS4032 11 A 1
RMC2007-1
MXH15-32
RMC1007-1 or
MC10-08-114 MXH15-34 MXM23 MXA1016 DTS4032 5 A 1
RMC2007-1
RMC1007-1 or
MC10-08-116 MXH15-32 MXM23 MXA1031 DTS4065 16 A 4
RMC2007-1
MXH15-2 or
MXA1018 or RMC1007 or
MC10-08-120 MXH15-22 or MXM23 DTS4012 5 A 1
MXA1016 RMC2007
MXH15-32
MXH15-2 or RMC1007-1 or
MC10-08-123 MXM23 MXA1016 DTS4032 5 A 1
MXH15-22 RMC2007-1
MXH15-2 or
RMC1007-1 or
MC10-08-124 MXH15-22 or MXM23 MXA1042 DTS4029 11 A 2
RMC2007-1
MXH15-32
MXH14-1 or RMC1007-1 or
MC10-08-126 MXM23 MXA1042 DTS4001 11 A 6
MXH14-31 RMC2007-1
*: Without
C : Connector / L : Line / M : Microphone

Page 17
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

SUPPLY WIRING
MASK MICROPHONE OXYGEN DIAGRAM
PNR HARNESS HOSE
ASSEMBLY KIT REGULATOR
ASSEMBLY M L C
MXH15-2 or
RMC1007-1 or
MC10-08-127 MXH15-22 or MXM23 MXA1016 DTS4035 5 A 1
RMC2007-1
MXH15-32
MXH15-2 or
RMC1007-1 or
MC10-08-128 MXH15-22 or MXM23 MXA1031 DTS4065 16 A 4
RMC2007-1
MXH15-32
MXH15-2 or
RMC1007-1 or
MC10-08-209 MXH15-22 or MXM23 MXA1016 DTS4032 5 A 1
RMC2007-1
MXH15-32
MXH15-2 or
RMC1002 or
MC10-09-00 MXH15-22 or MXM22 MXA1033 DTS4021 23 A 2
RMC2002
MXH15-32
MXH15-2 or
RMC1002 or
MC10-09-01 MXH15-22 or MXM22 MXA1033 DTS4029 23 A 2
RMC2002
MXH15-32
MXH15-2 or
RMC1022-4 or
MC10-10-100 MXH15-22 or MXM23 MXA1021 DTS4014 21 A 2
RMC2022-4
MXH15-32
MXH15-2 or
RMC1022-4 or
MC10-10-101 MXH15-22 or MXM23 MXA1021 DTS4019 21 A 2
RMC2022-4
MXH15-32
MXH15-2 or
MXA1006 or RMC1022-4 or
MC10-10-102 MXH15-22 or MXM23 DTS4014 6 A 2
MXA1051 RMC2022-4
MXH15-32
MXH15-2 or
RMC1022-4 or
MC10-10-103 MXH15-22 or MXM23 MXA1036 DTS4014 8 A 2
RMC2022-4
MXH15-32
MXH15-2 or
RMC1022-4 or
MC10-10-104 MXH15-22 or MXM23 MXA1038 DTS4014 8 A 2
RMC2022-4
MXH15-32
MXH15-2 or
RMC1022-5 or
MC10-12-100 MXH15-22 or MXM23 MXA1042 DTS4014 11 A 2
RMC2022-5
MXH15-32
MXH15-2 or
RMC1022-5 or
MC10-12-101 MXH15-22 or MXM23 MXA1042 DTS4104 11 A 2
RMC2022-5
MXH15-32
MXH20-1 or RMC1022-5 or
MC10-12-150 MXM23 MXA1042 DTS4014 11 A 2
MXH21-31 MC2022-5
MXH20-1 or RMC1022-5 or
MC10-12-151 MXM23 MXA1042 DTS4104 11 A 2
MXH21-31 RMC2022-5
MC10-12-152 MXH61-30 MXM23 MXA1042 RMC2022-5 DTS4104 11 A 2
MXH15-2 or
MXA1006 or RMC1019 or
MC10-13-02 MXH15-22 or MXM22 DTS4021 6 A 2
MXA1051 RMC2019
MXH15-32
*: Without
C : Connector / L : Line / M : Microphone

Page 18
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

SUPPLY WIRING
MASK MICROPHONE OXYGEN DIAGRAM
PNR HARNESS HOSE
ASSEMBLY KIT REGULATOR
ASSEMBLY M L C
MXH15-2 or
RMC1019-1 or
MC10-13-03 MXH15-22 or MXM22 MXA1042 DTS4029 11 A 2
RMC2019-1
MXH15-32
MXH15-2 or
RMC1019 or
MC10-13-04 MXH15-22 or MXM22 MXA1051 DTS4060 6 A 2
RMC2019
MXH15-32
MXH15-2 or
RMC1019 or
MC10-13-05 MXH15-22 or MXM22 MXA1041 DTS4024 12 A 3
RMC2019
MXH15-32
MXH15-2 or
MXA1006 or RMC1019 or
MC10-13-102 MXH15-22 or MXM23 DTS4021 6 A 2
MXA1051 RMC2019
MXH15-32
MXH15-2 or
RMC1019-1 or
MC10-13-103 MXH15-22 or MXM23 MXA1042 DTS4029 11 A 2
RMC2019-1
MXH15-32
MXH15-2 or
MXA1006 or RMC1019-2 or DTS4021
MC10-13-104 MXH15-22 or MXM23 6 A 2
MXA1051 RMC2019-2 or DTS4070
MXH15-32
MXH15-2 or
RMC1019 or
MC10-13-114 MXH15-22 or MXM23 MXA1051 DTS4060 6 A 2
RMC2019
MXH15-32
MXH20-1 or
RMC1019 or
MC10-13-150 MXH61 or MXM23 MXA1051 DTS4035 6 A 1
RMC2019
MXH21-31
MC10-13-151 MXH61-30 MXM23 MXA1051 RMC2019 DTS4035 6 A 1
MXH15-2 or
MXA1006 or RMC1020 or
MC10-14-00 MXH15-22 or MXM22 DTS4024 6 A 3
MXA1051 RMC2020
MXH15-32
MXH15-2 or
MXA1006 or RMC1020-1 or
MC10-14-01 MXH15-22 or MXM22 DTS4024 6 A 3
MXA1051 RMC2020-1
MXH15-32
MXH15-2 or
RMC1020-1 or
MC10-14-02 MXH15-22 or MXM22 MXA1044 DTS4024 3 A 3
RMC2020-1
MXH15-32
MXH15-2 or
MXA1006 or RMC1020 or
MC10-14-20 MXH15-22 or MXM22 DTS4024 6 A 3
MXA1051 RMC2020
MXH15-32
MXH15-2 or
MXA1006 or RMC1020-1 or
MC10-14-21 MXH15-22 or MXM22 DTS4024 6 A 3
MXA1051 RMC2020-1
MXH15-32
MXH15-2 or
RMC1020-1 or
MC10-14-22 MXH15-22 or MXM22 MXA1044 DTS4024 3 A 3
RMC2020-1
MXH15-32
*: Without
C : Connector / L : Line / M : Microphone

Page 19
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

SUPPLY WIRING
MASK MICROPHONE OXYGEN DIAGRAM
PNR HARNESS HOSE
ASSEMBLY KIT REGULATOR
ASSEMBLY M L C
MXH15-2 or
MXA1006 or RMC1020 or
MC10-14-100 MXH15-22 or MXM23 DTS4024 6 A 3
MXA1051 RMC2020
MXH15-32
MXH15-2 or
MXA1006 or RMC1020-1 or
MC10-14-101 MXH15-22 or MXM23 DTS4024 6 A 3
MXA1051 RMC2020-1
MXH15-32
MXH15-2 or
RMC1020-1 or
MC10-14-102 MXH15-22 or MXM23 MXA1044 DTS4024 3 A 3
RMC2020-1
MXH15-32
MXH15-2 or
RMC1020-1 or
MC10-14-103 MXH15-22 or MXM23 MXA1045 DTS4024 13 A 3
RMC2020-1
MXH15-32
MXH15-2 or
RMC1020-1 or
MC10-14-104 MXH15-22 or MXM23 MXA1042 DTS4024 11 A 3
RMC2020-1
MXH15-32
MXH15-2 or
MXA1006 or RMC1020 or
MC10-14-120 MXH15-22 or MXM23 DTS4024 6 A 3
MXA1051 RMC2020
MXH15-32
MXH15-2 or
MXA1006 or RMC1020-1 or
MC10-14-121 MXH15-22 or MXM23 DTS4024 6 A 3
MXA1051 RMC2020-1
MXH15-32
MXH15-2 or
RMC1020-1 or
MC10-14-122 MXH15-22 or MXM23 MXA1044 DTS4024 3 A 3
RMC2020-1
MXH15-32
MXH15-2 or
RMC1020-1 or
MC10-14-123 MXH15-22 or MXM23 MXA1045 DTS4024 13 A 3
RMC2020-1
MXH15-32
MXH15-2 or
RMC1020-1 or
MC10-14-124 MXH15-22 or MXM23 MXA1042 DTS4024 11 A 3
RMC2020-1
MXH15-32
MXH20 or
MXA1006 or RMC1020-1 or
MC10-14-151 MXH20-1 or MXM23 DTS4024 * * *
MXA1051 RMC2020-1
MXH21–31
MXH15-2 or
MXA1006 or RMC1022 or
MC10-15-01 MXH15-22 or MXM22 DTS4025 6 A 2
MXA1051 RMC2022
MXH15-32
MXH15-2 or
MXA1006 or RMC1022-1 or
MC10-15-02 MXH15-22 or MXM22 DTS4030 6 A 2
MXA1051 RMC2022-1
MXH15-32
MXH15-2 or
RMC1022-1 or
MC10-15-03 MXH15-22 or MXM22 MXA1036 DTS4033 8 A 8
RMC2022-1
MXH15-32
MXH15-2 or
RMC1022 or
MC10-15-04 MXH15-22 or MXM22 MXA1036 DTS4029 8 A 2
RMC2022
MXH15-32
*: Without
C : Connector / L : Line / M : Microphone

Page 20
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

SUPPLY WIRING
MASK MICROPHONE OXYGEN DIAGRAM
PNR HARNESS HOSE
ASSEMBLY KIT REGULATOR
ASSEMBLY M L C
MXH15-2 or
RMC1022-1 or
MC10-15-05 MXH15-22 or MXM22 MXA1035 DTS4030 11 A 2
RMC2022-1
MXH15-32
MXH15-2 or MXA1006 or RMC1022 or
MC10-15-07 MXM22 DTS4029 6 A 2
MXH15-22 MXA1051 RMC2022
MXH15-2 or
RMC1022-2 or
MC10-15-09 MXH15-22 or MXM22 MXA1035 DTS4045 11 A 2
RMC2022-2
MXH15-32
MXH15-2 or
RMC1022-3 or
MC10-15-10 MXH15-22 or MXM22 MXA1042 DTS4051 11 A 2
RMC2022-3
MXH15-32
MXH15-2 or
MXA1006 or RMC1022-1 or
MC10-15-11 MXH15-22 or MXM22 DTS4045 6 A 2
MXA1051 RMC2022-1
MXH15-32
MXH16 or
RMC1022-6 or
MC10-15-12 MXH16-20 or MXM22 MXA1042 DTS4095 11 A 2
RMC2022-6
MXH16-30
MXH15-2 or
MXA1006 or RMC1022-1 or
MC10-15-13 MXH15-22 or MXM22 DTS4025 6 A 2
MXA1051 RMC2022-1
MXH15-32
MXH16 or
RMC1022-6 or
MC10-15-17 MXH16-20 or MXM22 MXA1042 DTS4006 11 A 3
RMC2022-6
MXH16-30
MXH16 or
RMC1022-7 or
MC10-15-18 MXH16-20 or MXM22 MXA1042 DTS4095 11 A 2
RMC2022-7
MXH16-30
MXH15-2 or
RMC1022 or
MC10-15-101 MXH15-22 or MXM23 MXA1051 DTS4025 6 A 2
RMC2022
MXH15-32
MXH15-2 or
MXA1006 or RMC1022-1 or
MC10-15-102 MXH15-22 or MXM23 DTS4030 6 A 2
MXA1051 RMC2022-1
MXH15-32
MXH15-2 or RMC1022 or
MC10-15-104 MXM23 MXA1036 DTS4029 8 A 2
MXH15-22 RMC2022
MXH15-2 or
RMC1022-1 or
MC10-15-105 MXH15-22 or MXM23 MXA1035 DTS4030 11 A 2
RMC2022-1
MXH15-32
MXH15-2 or
MXA1006 or RMC1022 or
MC10-15-107 MXH15-22 or MXM23 DTS4029 6 A 2
MXA1051 RMC2022
MXH15-32
MXH15-2 or
RMC1022 or
MC10-15-108 MXH15-22 or MXM23 MXA1016 DTS4029 5 A 2
RMC2022
MXH15-32
*: Without
C : Connector / L : Line / M : Microphone

Page 21
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

SUPPLY WIRING
MASK MICROPHONE OXYGEN DIAGRAM
PNR HARNESS HOSE
ASSEMBLY KIT REGULATOR
ASSEMBLY M L C
MXH15-2 or
RMC1022-2 or
MC10-15-109 MXH15-22 or MXM23 MXA1035 DTS4045 11 A 2
RMC2022-2
MXH15-32
MXH15-2 or
RMC1022-1 or
MC10-15-113 MXH15-22 or MXM23 MXA1051 DTS4025 6 A 2
RMC2022-1
MXH15-32
MXH15-2 or
RMC1022-1 or
MC10-15-114 MXH15-22 or MXM23 MXA1036 DTS4021 8 A 2
RMC2022-1
MXH15-32
MXH15-2 or
RMC1022 or
MC10-15-115 MXH15-22 or MXM23 MXA1044 DTS4029 3 A 2
RMC2022
MXH15-32
MXH15-2 or
RMC1022-1 or
MC10-15-116 MXH15-22 or MXM23 MXA1016 DTS4021 5 A 2
RMC2022-1
MXH15-32
MXH16 or
RMC1022-6 or
MC10-15-117 MXH16-20 or MXM23 MXA1042 DTS4006 11 A 3
RMC2022-6
MXH16-30
MXH16 or
RMC1022-7 or
MC10-15-118 MXH16-20 or MXM23 MXA1042 DTS4095 11 A 2
RMC2022-7
MXH16-30
MXH15-2 or
RMC1022 or
MC10-15-119 MXH15-22 or MXM23 MXA1016 DTS4020 5 A 2
RMC2022
MXH15-32
MXH15-2 or RMC1022-3 or
MC10-15-120 MXH15-22 or MXM23 MXA1035 RMC1122-3 or DTS4109 11 A 3
MXH15-32 RMC2122-3
MXH15-2 or
RMC1022-2 or
MC10-15-121 MXH15-22 or MXM23 MXA1042 DTS4046 11 A 2
RMC2022-2
MXH15-32
MXH15-2 or
RMC1122-3 or
MC10-15-122 MXH15-22 or MXM23 MXA1042 DTS4161 11 A 1
RMC2122-3
MXH15-32
MXH20-1 or RMC1022 or
MC10-15-151 MXM23 MXA1051 DTS4025 6 A 2
MXH21-31 RMC2022
MXH20-1 or RMC1022-1 or
MC10-15-152 MXM23 MXA1051 DTS4030 6 A 2
MXH21-31 RMC2022-1
MXH20-1 or RMC1022-1 or
MC10-15-155 MXM23 MXA1035 DTS4030 11 A 2
MXH21-31 RMC2022-1
MXH20-1 or RMC1022 or
MC10-15-157 MXM23 MXA1051 DTS4029 6 A 2
MXH21-31 RMC2022
MXH20-1 or RMC1022 or
MC10-15-158 MXM23 MXA1016 DTS4029 5 A 2
MXH21-31 RMC2022
MXH20-1 or RMC1022-2 or
MC10-15-159 MXM23 MXA1042 DTS4045 11 A 2
MXH21-31 RMC2022-2
*: Without
C : Connector / L : Line / M : Microphone

Page 22
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

SUPPLY WIRING
MASK MICROPHONE OXYGEN DIAGRAM
PNR HARNESS HOSE
ASSEMBLY KIT REGULATOR
ASSEMBLY M L C
MXH20-1 or RMC1022-1 or
MC10-15-166 MXM23 MXA1016 DTS4021 5 A 2
MXH21-31 RMC2022-1
MXH20-1 or RMC1022-6 or
MC10-15-167 MXM23 MXA1042 DTS4006 11 A 3
MXH21-31 RMC2022-6
MXH20-1 or RMC1022-7 or
MC10-15-168 MXM23 MXA1042 DTS4095 11 A 2
MXH21-31 RMC2022-7
RMC1022-3 or
MXH20-1 or
MC10-15-170 MXM23 MXA1042 RMC1122-3 or DTS4109 11 A 3
MXH21-31
RMC2122-3
MXH20-1 or RMC1022-2 or
MC10-15-171 MXM23 MXA1042 DTS4046 11 A 2
MXH21-31 RMC2022-2
MXH20-1 or RMC1022-1 or
MC10-15-176 MXM23 MXA1016 DTS4117 5 A 2
MXH21-31 RMC2022-1
MXH15-2 or
RMC1016 or
MC10-16-100 MXH15-22 or MXM23 MXA1042 DTS4059 11 A 3
RMC2016
MXH15-32
MXH15-2 or
RMC1016-1 or
MC10-16-101 MXH15-22 or MXM23 MXA1042 DTS4046 11 A 2
RMC2016-1
MXH15-32
MXH15-2 or
RMC1016-1 or
MC10-16-103 MXH15-22 or MXM23 MXA1042 DTS4095 11 A 2
RMC2016-1
MXH15-32
MXH15-2 or
RMC1016-1 or
MC10-16-104 MXH15-22 or MXM23 MXA1042 DTS4063 11 A 3
RMC2016-1
MXH15-32
MXH15-2 or
RMC1016 or
MC10-16-105 MXH15-22 or MXM23 MXA1042 DTS4070 11 A 2
RMC2016
MXH15-32
MXH20-1 or RMC1016 or
MC10-16-150 MXM23 MXA1042 DTS4059 11 A 3
MXH21-31 RMC2016
MXH20-1 or RMC1016-1 or
MC10-16-151 MXM23 MXA1042 DTS4046 11 A 2
MXH21-31 RMC2016-1
MXH20-1 or RMC1016 or
MC10-16-152 MXM23 MXA1042 DTS4010 11 A 1
MXH21-31 RMC2016
MXH20-1 or RMC1016-1 or
MC10-16-153 MXM23 MXA1042 DTS4095 11 A 2
MXH21-31 RMC2016-1
MXH15-2 or
RMC1018 or
MC10-17-00 MXH15-22 or MXM22 MXA1016 DTS4029 5 A 2
RMC2018
MXH15-32
MXH15-2 or
RMC1018 or
MC10-17-100 MXH15-22 or MXM23 MXA1016 DTS4029 5 A 2
RMC2018
MXH15-32
*: Without
C : Connector / L : Line / M : Microphone

Page 23
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

SUPPLY WIRING
MASK MICROPHONE OXYGEN DIAGRAM
PNR HARNESS HOSE
ASSEMBLY KIT REGULATOR
ASSEMBLY M L C
MXH15-2 or
MXA1006 or RMC1018 or
MC10-17-101 MXH15-22 or MXM23 DTS4020 6 A 2
MXA1051 RMC2018
MXH15-32
MXH15-2 or
RMC1005 or
MC10-19-00 MXH15-22 or MXM22 MXA1038 DTS4032 8 A 1
RMC2005
MXH15-32
MXH15-2 or RMC1005 or
MC10-19-01 MXM22 MXA1016 DTS4032 5 A 1
MXH15-22 or RMC2005
MXH15-2 or
RMC1005 or
MC10-19-02 MXH15-22 or MXM22 MXA1016 DTS4032 5 A 1
RMC2005
MXH15-32
RMC1005 or
MC10-19-03 MXH15-32 MXM22 MXA1016 DTS4032 5 A 1
RMC2005
MXH15-2 or RMC1005 or
MC10-19-101 MXM23 MXA1016 DTS4032 5 A 1
MXH15-22 RMC2005
MXH15-2 or
RMC1005 or
MC10-19-102 MXH15-22 or MXM23 MXA1016 DTS4032 5 A 1
RMC2005
MXH15-32
MXH15-2 or
RMC1005 or
MC10-19-103 MXH15-22 or MXM23 MXA1051 DTS4131 6 A 2
RMC2005
MXH15-32
RMC1005 or
MC10-19-104 MXH15-32 MXM23 MXA1016 DTS4032 5 A 1
RMC2005
MXH21-1 or RMC1005 or
MC10-19-151 MXM23 MXA1016 DTS4032 5 A 1
MXH21-31 RMC2005
MXH15-2 or
RMC1012 or
MC10-20-00 MXH15-22 or MXM22 MXA1038 DTS4032 8 A 1
RMC2012
MXH15-32
MXH15-2 or
RMC1018 or
MC10-22-00 MXH15-22 or MXM22 MXA1038 DTS4005 8 A 1
RMC2018
MXH15-32
MXH15-2 or
RMC1018 or
MC10-22-01 MXH15-22 or MXM22 MXA1044 DTS4005 3 A 1
RMC2018
MXH15-32
MXH15-2 or
RMC1018 or
MC10-22-100 MXH15-22 or MXM23 MXA1038 DTS4005 8 A 1
RMC2018
MXH15-32
MXH15-2 or
RMC1018 or
MC10-22-101 MXH15-22 or MXM23 MXA1044 DTS4005 3 A 1
RMC2018
MXH15-32
MXH15-2 or
RMC1018-1 or
MC10-25-00 MXH15-22 or MXM22 MXA1038 DTS4032 8 A 1
RMC2018-1
MXH15-32
MXH15-2 or RMC1018-1 or
MC10-25-01 MXM22 MXA1016 DTS4032 5 A 1
MXH15-22 or RMC2018-1
*: Without
C : Connector / L : Line / M : Microphone

Page 24
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

SUPPLY WIRING
MASK MICROPHONE OXYGEN DIAGRAM
PNR HARNESS HOSE
ASSEMBLY KIT REGULATOR
ASSEMBLY M L C
RMC1018-1 or
MC10-25-02 MXH15-32 MXM22 MXA1016 DTS4032 5 A 1
RMC2018-1
MXH15-2 or
RMC1018-1 or
MC10-25-04 MXH15-22 or MXM22 MXA1016 DTS4032 5 A 1
RMC2018-1
MXH15-32
MXH15-2 or RMC1018-1 or
MC10-25-101 MXM23 MXA1016 DTS4032 5 A 1
MXH15-22 RMC2018-1
MXH15-2 or
MC10-25-102 MXH15-22 or MXM23 MXA1052 RMC1018-5 DTS4032 17 A 1
MXH15-32
MXH15-2 or
RMC1018-1 or
MC10-25-103 MXH15-22 or MXM23 MXA1016 DTS4059 5 A 3
RMC2018-1
MXH15-32
MXH15-2 or RMC1018-1 or
MC10-25-104 MXM23 MXA1016 DTS4032 5 A 1
MXH15-22 RMC2018-1
MXH15-2 or
RMC1018-1 or
MC10-25-105 MXH15-22 or MXM23 MXA1016 DTS4059 5 A 3
RMC2018-1
MXH15-32
MXH15-2 or
RMC1018-2 or
MC10-25-106 MXH15-22 or MXM23 MXA1016 DTS4032 5 A 1
RMC2018-2
MXH15-32
MXH15-2 or
RMC1018-5 or
MC10-25-107 MXH15-22 or MXM23 MXA1052 DTS4145 17 A 14
RMC2018-5
MXH15-32
MXH15-23 or
MC10-25-108 MXM23 WITHOUT RMC2018-6 DTS4167 * * *
MXH15-33
RMC1018-1 or
MC10-25-110 MXH15-34 MXM23 MXA1016 DTS4032 5 A 1
RMC2018-1
MXH15-2 or
RMC1018-1 or
MC10-25-124 MXH15-22 or MXM23 MXA1016 DTS4032 5 A 1
RMC2018-1
MXH15-32
MXH21-1 or RMC1018-1 or
MC10-25-154 MXM23 MXA1016 DTS4032 5 A 1
MXH21-31 RMC2018-1
RMC1018-1 or
MC10-25-158 MXH21-1 or MXM23 MXA1016 DTS4032 5 A 1
RMC2018-1
RMC1018-1 or
MC10-25-159 MXH21-31 MXM23 MXA1016 DTS4032 5 A 1
RMC2018-1
MXH15-2 or
RMC1018-1 or
MC10-25-204 MXH15-22 or MXM23 MXA1016 DTS4032 5 A 1
RMC2018-1
MXH15-32
MXH15-2 or
RMC1029 or
MC10-32-101 MXH15-22 or MXM23 MXA1016 DTS4076 5 A 1
RMC2029
MXH15-32
*: Without
C : Connector / L : Line / M : Microphone

Page 25
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

SUPPLY WIRING
MASK MICROPHONE OXYGEN DIAGRAM
PNR HARNESS HOSE
ASSEMBLY KIT REGULATOR
ASSEMBLY M L C
MXH15-2 or
RMC1029 or
MC10-32-102 MXH15-22 or MXM23 MXA1049 DTS4076 20 A 1
RMC2029
MXH15-32
MXH15-2 or
MXA1040 or RMC1029 or
MC10-32-103 MXH15-22 or MXM23 DTS4090 * A 1
MXA1059 RMC2029
MXH15-32
MXH16 or
RMC1035 or
MC10-35-101 MXH16-20 or MXM23 MXA1042 DTS4032 11 A 11
RMC2035
MXH16-30
MXH16-20 or RMC1035 or
MC10-35-102 MXM23 MXA1042 DTS4032 11 A 11
MXH16-30 RMC2035
*: Without
C : Connector / L : Line / M : Microphone

Table 3 / BREAKDOWN (1)

(1) Refer to the Illustrated Parts List for configuration of each Crew Oxygen Mask
Regulator.

Page 26
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TASK 35-13-63-870-803-A01
3. OPERATION

SUBTASK 35-13-63-870-005-A01
A. General
(1) The oxygen used in the Crew Oxygen Mask Regulator is supplied by the aircraft
oxygen supply system. It goes through the supply hose (refer to table 1 for
pressure).
(2) The regulator is of the "pilot-valve" type. It has the functions that follow:
– "N" (Normal) - "100%" oxygen,
– Altimetric dilution,
– Automatic pressure breathing (Optional),
– Emergency pressure relief, and functional test.

SUBTASK 35-13-63-870-006-A01
B. Operation of the Oxygen Regulator RMC1000 Series / RMC1100 Series / RMC2000
SERIES
(1) Refer to CMM 35-13-70 (Subtask 35-13-70–870-006-A01) or CMM 35-13-74
(Subtask 35-13-74-870-006-A01) for the operation of the oxygen regulator.

SUBTASK 35-13-63-870-007-A01
C. Operation of the Inflatable Harness MXH Series
(1) Refer to CMM 35-13-71 (Subtask 35-13-71-870-006-A01) for the operation of
the inflatable harness.

SUBTASK 35-13-63-870-008-A01
D. Operation of the Mask Assembly MXM Series
(1) Refer to CMM 35-13-71 (Subtask 35-13-71-870-007-A01) for the operation of
the mask assembly.

SUBTASK 35-13-63-870-009-A01
E. Operation of the Supply Hose and Radio Cord Assembly DTS4xxx Series
(1) Refer to CMM 35-13-72 (Task 35-13-72-870-803-A01) for the operation of the
supply hose and radio cord assembly.

SUBTASK 35-13-63-870-010-A01
F. Operation of the Microphone Assembly MXA Series
(1) Not applicable

Page 27
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

CREW OXYGEN MASK REGULATOR

Figure 1/GRAPHIC-35-13-63-991-001-A01

Page 28
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

OVERALL DIMENSIONS (Sheet 1 of 3)

Figure 2/GRAPHIC-35-13-63-991-002-A01

Page 29
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

OVERALL DIMENSIONS (Sheet 2 of 3)

Figure 2/GRAPHIC-35-13-63-991-002-A01

Page 30
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

OVERALL DIMENSIONS (Sheet 3 of 3)

Figure 2/GRAPHIC-35-13-63-991-002-A01

Page 31
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

THIS PAGE INTENTIONALLY LEFT BLANK

Page 32
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TESTING AND FAULT ISOLATION

TASK 35-13-63-700-801-A01
1. GENERAL

A. Generality

WARNING : STRICTLY OBEY THE PROCEDURES WHEN YOU DO WORK ON THE

OXYGEN SYSTEM. DO NOT USE OIL, GREASE OR OTHER LUBRI-
CANTS MADE FROM PETROL IN THE AREA OF OXYGEN EQUIPMENT.
YOU CAN CAUSE A FIRE OR EXPLOSION.

CAUTION : IN ALL THE PROCEDURES, GASEOUS OXYGEN IS SPECIFIED AS

THE TEST GAS. GASEOUS NITROGEN (BB-N-411B TYPE 1, CLASS 1,
GRADE A STANDARD) OR DRY AND OIL-FREE AIR (CRITERIA: TOTAL
HYDROCARBON: WEIGHT LESS THAN 6 PPM IN VOLUME - SOLID
PARTICLES: LESS THAN 10 MICROMETERS - WATER CONTENT:
LESS THAN 5 MG/M3 AT ATMOSPHERIC AMBIANCE (EQUIVALENT
DEW POINT: -63 ºC (-81 ºF) AT 760 MMHG)) CAN REPLACE THE
GASEOUS OXYGEN. THEN, YOU MUST DO A CONVERSION OF
THE RESULTS BEFORE YOU COMPARE THEM WITH THE RESULTS
SPECIFIED FOR THE GASEOUS OXYGEN. DO NOT USE OIL-PUMPED
GAS.

(1) Reason for the Job

(a) Do all tests to make sure that the equipment is serviceable. You must also do
all tests if an equipment component or subassembly is replaced.

B. Job Set-Up Information

(1) Tools, Fixtures and Equipment
(a) Table 1001 gives the tools, fixtures and equipment necessary to do the
maintenance of the component.
NOTE : You can use alternatives for the listed items.
NOTE : Refer to SPECIAL TOOLS, FIXTURE, EQUIPMENT AND CON-
SUMABLES for full details.
(b) A test bench or a test chamber suitable for the special tests illustrated in
the following diagrams.

Page 1001
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

PNR DESCRIPTION RANGE SOURCE

F1 Flow meter 0,006 to 0,06 l/min Local supply
(Accuracy ± 5% full scale)
F2 Flow meter 0,025 to 0,25 l/min Local supply
(Accuracy ± 4% full scale)
F3 Flow meter 2 to 20 l/min Local supply
(Accuracy ± 2% full scale)
G1 Pressure gauge 0 to +1 MPa Local supply
(Accuracy ± 1% full scale)
G2 Pressure gauge -2 to +2 kPa Local supply
(Accuracy ± 1% full scale)
V1 On/Off valve - Local supply
V2 On/Off valve - Local supply
R1 Adjustable pressure reducer 0 to 1 MPa Local supply
S1 Oxygen source - Local supply
S2 Vacuum source From 10 to 101.3 kPa Local supply
Flow 40 m3/h
422095 Supply coupling - VF5341
407518 Plug - VF5341
422098-1 Test box - VF5341
480964 Mask support - VF5341
485917 Microphone test set - VF5341
or equivalent
510272* Adaptor - VF5341

Table 1001 / TESTING - TOOLS, FIXTURES AND EQUIPMENT

* Applicable with supply hose equipped with oxygen inlet coupling PNR 802627-01
(2) Consumables
(a) Table 1002 gives the consumable necessary to do the maintenance of the
component.
NOTE : You can use alternatives for the listed items.
NOTE : Refer to SPECIAL TOOLS, FIXTURE, EQUIPMENT AND CON-
SUMABLES for full details.

MATERIAL DESCRIPTION SOURCE

Oxygen MIL-0-27210 type 1 or Local supply
SAE AS 8010 standards or
Technical Clause CT EQ 630-56

Table 1002 / TESTING CONSUMABLE

Page 1002
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

(3) Test Conditions

(a) Do all tests under the standard conditions of test laboratory:
Ambient temperature . . . . . . . . . . . . . . . . . 22 ± 5°C (62.6 to 80.6°F)
Barometric pressure . . . . . . . . . . . . . . . . . 101,33 ± 10 kPa (13 to 16 psi)
Relative humidity . . . . . . . . . . . . . . . . . . . . Less than 80 %
(b) Special notice for flowmeters
Because it is a common laboratory and workshop practice at Zodiac Aerotechnics,
the flow figures given in this document are already determined for OXYGEN as
supply gas and use of float flowmeters calibrated with AIR at a temperature 15ºC
and ambient pressure 1013 hPa. If you use another test gas or/and flowmeters
calibrated with oxygen, do the necessary corrections to your readings (index)
according to the following chart.

Test gas Flowmeter calibrated with AIR Flowmeter calibrated with OXYGEN
AIR Multiply the index read by 1.05 Multiply the index read by 1.10
NITROGEN Multiply the index read by 1.07 Multiply the index read by 1.12
OXYGEN Multiply the index read by 1.00 Multiply the index read by 1.05

Temperature corrections with respect to flowmeter calibration temperature :

— 1ºC temperature rise, causes the flowmeter index to decrease by 0.2 %
— 1ºC temperature decrease, causes the flowmeter index to
increase by 0.2 %
This gives a variation of 0,002 L/min by ºC and by L/min.

C. Test Configuration

CAUTION : INCREASE OR DECREASE THE SUPPLY PRESSURE SLOWLY ON

EACH OPERATION.

A summary of the procedures for the tests and for the checks is given in the testing tables.

Page 1003
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

THIS PAGE INTENTIONALLY LEFT BLANK

Page 1004
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TASK 35-13-63-700-802-A01
2. TEST OF THE CREW OXYGEN MASK REGULATOR
A. GENERAL
NOTE : Before you test the crew oxygen mask regulator, do a complete test of the
oxygen regulator (refer to CMM 35-13-70 or CMM 35-13-74).
NOTE : Do the tests with the regulator in its operation position.
NOTE : During the tests you have to fill in the result boxes of the relevant testing table
(Refer to Table 1003).

CREW OXYGEN MASK REGULATOR PNR TESTING TABLE

MC10-02-01 TABLE 1009
MC10-02-02 TABLE 1009
MC10-02-03 TABLE 1009
MC10-02-04 TABLE 1009
MC10-02-05 TABLE 1009
MC10-02-06 TABLE 1009
MC10-02-07 TABLE 1009
MC10-02-10 TABLE 1009
MC10-02-22 TABLE 1009
MC10-02-50 TABLE 1009
MC10-02-54 TABLE 1009
MC10-02-55 TABLE 1009
MC10-02-69 TABLE 1009
MC10-02-102 TABLE 1009
MC10-02-104 TABLE 1009
MC10-02-105 TABLE 1009
MC10-02-106 TABLE 1009
MC10-02-107 TABLE 1009
MC10-02-108 TABLE 1009
MC10-02-109 TABLE 1009
MC10-02-112 TABLE 1009
MC10-02-115 TABLE 1009
MC10-02-116 TABLE 1009
MC10-02-117 TABLE 1009
MC10-02-121 TABLE 1009
MC10-02-155 TABLE 1009
MC10-02-169 TABLE 1009
* when equipped with harness PNR MXH20-1 or MXH21-31
** when equipped with harness PNR MXH61 or MXH61-30

Page 1005
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

CREW OXYGEN MASK REGULATOR PNR TESTING TABLE

MC10-02-170 TABLE 1009* or TABLE 1016**
MC10-02-171 TABLE 1009
MC10-02-103 TABLE 1018
MC10-02-114 TABLE 1018
MC10-02-60 TABLE 1018
MC10-04-01 TABLE 1013
MC10-04-02 TABLE 1013
MC10-04-07 TABLE 1013
MC10-04-21 TABLE 1013
MC10-04-22 TABLE 1013
MC10-04-27 TABLE 1013
MC10-04-77 TABLE 1013
MC10-04-101 TABLE 1013
MC10-04-102 TABLE 1013
MC10-04-105 TABLE 1013
MC10-04-107 TABLE 1013
MC10-04-109 TABLE 1013
MC10-04-110 TABLE 1013
MC10-04-111 TABLE 1013
MC10-04-112 TABLE 1013
MC10-04-115 TABLE 1013
MC10-04-116 TABLE 1013
MC10-04-121 TABLE 1013
MC10-04-122 TABLE 1013
MC10-04-127 TABLE 1013
MC10-04-157 TABLE 1013
MC10-04-159 TABLE 1013
MC10-04-177 TABLE 1013
MC10-05-04 TABLE 1006
MC10-05-100 TABLE 1006
MC10-05-101 TABLE 1006
MC10–05–102 TABLE 1006
MC10-05-104 TABLE 1006
MC10-05-124 TABLE 1006
MC10-05-152 TABLE 1006
MC10-06-00 TABLE 1009
MC10-06-01 TABLE 1009
* when equipped with harness PNR MXH20-1 or MXH21-31
** when equipped with harness PNR MXH61 or MXH61-30

Page 1006
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

CREW OXYGEN MASK REGULATOR PNR TESTING TABLE

MC10-06-03 TABLE 1009
MC10-06-20 TABLE 1009
MC10-06-21 TABLE 1009
MC10-06-23 TABLE 1009
MC10-06-100 TABLE 1009
MC10-06-101 TABLE 1009
MC10-06-102 TABLE 1009
MC10-06-104 TABLE 1009
MC10-06-105 TABLE 1009
MC10-06-106 TABLE 1009
MC10-06-120 TABLE 1009
MC10-06-121 TABLE 1009
MC10-06-124 TABLE 1009
MC10-06-125 TABLE 1009
MC10-06-126 TABLE 1009
MC10-06-127 TABLE 1018
MC10-06-128 TABLE 1018
MC10-08-00 TABLE 1005
MC10-08-01 TABLE 1009
MC10-08-02 TABLE 1009
MC10-08-05 TABLE 1012
MC10-08-09 TABLE 1009
MC10-08-13 TABLE 1009
MC10-08-25 TABLE 1012
MC10-08-100 TABLE 1005
MC10-08-102 TABLE 1009
MC10-08-103 TABLE 1009
MC10-08-104 TABLE 1009
MC10-08-106 TABLE 1009
MC10-08-107 TABLE 1009
MC10-08-108 TABLE 1009
MC10-08-109 TABLE 1009
MC10-08-110 TABLE 1009
MC10-08-111 TABLE 1009
MC10-08-112 TABLE 1009
MC10-08-114 TABLE 1009
MC10-08-116 TABLE 1009
* when equipped with harness PNR MXH20-1 or MXH21-31
** when equipped with harness PNR MXH61 or MXH61-30

Page 1007
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

CREW OXYGEN MASK REGULATOR PNR TESTING TABLE

MC10-08-120 TABLE 1005
MC10-08-123 TABLE 1009
MC10-08-124 TABLE 1009
MC10-08-126 TABLE 1009
MC10-08-127 TABLE 1009
MC10-08-128 TABLE 1009
MC10-08-209 TABLE 1009
MC10-09-00 TABLE 1014
MC10-09-01 TABLE 1014
MC10-10-100 TABLE 1010
MC10-10-101 TABLE 1010
MC10-10-102 TABLE 1010
MC10-10-103 TABLE 1010
MC10-10-104 TABLE 1010
MC10-12-100 TABLE 1010
MC10-12-101 TABLE 1010
MC10-12-150 TABLE 1010
MC10-12-151 TABLE 1010
MC10-12-152 TABLE 1020
MC10-13-02 TABLE 1011
MC10-13-03 TABLE 1015
MC10-13-04 TABLE 1011
MC10-13-05 TABLE 1011
MC10-13-102 TABLE 1011
MC10-13-103 TABLE 1015
MC10-13-104 TABLE 1011
MC10-13-114 TABLE 1011
MC10-13-150 TABLE 1011* or TABLE 1017**
MC10-13-151 TABLE 1019
MC10-14-00 TABLE 1008
MC10-14-01 TABLE 1008
MC10-14-02 TABLE 1008
MC10-14-20 TABLE 1008
MC10-14-21 TABLE 1008
MC10-14-22 TABLE 1008
MC10-14-100 TABLE 1008
MC10-14-101 TABLE 1008
* when equipped with harness PNR MXH20-1 or MXH21-31
** when equipped with harness PNR MXH61 or MXH61-30

Page 1008
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

CREW OXYGEN MASK REGULATOR PNR TESTING TABLE

MC10-14-102 TABLE 1008
MC10-14-103 TABLE 1008
MC10-14-104 TABLE 1008
MC10-14-120 TABLE 1008
MC10-14-121 TABLE 1008
MC10-14-122 TABLE 1008
MC10-14-123 TABLE 1008
MC10-14-124 TABLE 1008
MC10-14-151 TABLE 1008
MC10-15-01 TABLE 1009
MC10-15-02 TABLE 1009
MC10-15-03 TABLE 1009
MC10-15-04 TABLE 1009
MC10-15-05 TABLE 1009
MC10-15-07 TABLE 1009
MC10-15-09 TABLE 1015
MC10-15-10 TABLE 1015
MC10-15-11 TABLE 1009
MC10-15-12 TABLE 1015
MC10-15-13 TABLE 1009
MC10-15-17 TABLE 1015
MC10-15-18 TABLE 1015
MC10-15-101 TABLE 1009
MC10-15-102 TABLE 1009
MC10-15-104 TABLE 1009
MC10-15-105 TABLE 1009
MC10-15-107 TABLE 1009
MC10-15-108 TABLE 1009
MC10-15-109 TABLE 1015
MC10-15-113 TABLE 1009
MC10-15-114 TABLE 1009
MC10-15-115 TABLE 1009
MC10-15-116 TABLE 1009
MC10-15-117 TABLE 1015
MC10-15-118 TABLE 1015
MC10-15-119 TABLE 1009
MC10-15-120 TABLE 1015
* when equipped with harness PNR MXH20-1 or MXH21-31
** when equipped with harness PNR MXH61 or MXH61-30

Page 1009
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

CREW OXYGEN MASK REGULATOR PNR TESTING TABLE

MC10-15-121 TABLE 1015
MC10-15-122 TABLE 1015
MC10-15-151 TABLE 1015
MC10-15-152 TABLE 1009
MC10-15-155 TABLE 1009
MC10-15-157 TABLE 1009
MC10-15-158 TABLE 1009
MC10-15-159 TABLE 1015
MC10-15-166 TABLE 1009
MC10-15-167 TABLE 1015
MC10-15-168 TABLE 1015
MC10-15-170 TABLE 1015
MC10-15-171 TABLE 1015
MC10-15-176 TABLE 1009
MC10-16-100 TABLE 1007
MC10-16-101 TABLE 1007
MC10-16-103 TABLE 1007
MC10-16-104 TABLE 1007
MC10-16-105 TABLE 1007
MC10-16-150 TABLE 1007
MC10-16-151 TABLE 1007
MC10-16-152 TABLE 1007
MC10-16-153 TABLE 1007
MC10-17-00 TABLE 1009
MC10-17-100 TABLE 1009
MC10-17-101 TABLE 1009
MC10-19-00 TABLE 1009
MC10-19-01 TABLE 1009
MC10-19-02 TABLE 1009
MC10-19-03 TABLE 1009
MC10-19-101 TABLE 1009
MC10-19-102 TABLE 1009
MC10-19-103 TABLE 1009
MC10-19-104 TABLE 1009
MC10–19–151 TABLE 1009
MC10-20-00 TABLE 1009
MC10-22-00 TABLE 1009
* when equipped with harness PNR MXH20-1 or MXH21-31
** when equipped with harness PNR MXH61 or MXH61-30

Page 1010
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

CREW OXYGEN MASK REGULATOR PNR TESTING TABLE

MC10-22-01 TABLE 1009
MC10-22-100 TABLE 1009
MC10-22-101 TABLE 1009
MC10-25-00 TABLE 1009
MC10-25-01 TABLE 1009
MC10-25-02 TABLE 1009
MC10-25-04 TABLE 1009
MC10-25-101 TABLE 1009
MC10-25-102 TABLE 1009
MC10-25-103 TABLE 1009
MC10-25-104 TABLE 1009
MC10-25-105 TABLE 1009
MC10-25-106 TABLE 1009
MC10-25-107 TABLE 1009
MC10-25-108 TABLE 1009
MC10-25-110 TABLE 1009
MC10-25-124 TABLE 1009
MC10-25-154 TABLE 1009
MC10-25-158 TABLE 1009
MC10-25-159 TABLE 1009
MC10-25-204 TABLE 1009
MC10-25-110 TABLE 1009
MC10-32-101 TABLE 1009
MC10-32-102 TABLE 1009
MC10-32-103 TABLE 1009
MC10-35-101 TABLE 1013
MC10-35-102 TABLE 1013
* when equipped with harness PNR MXH20-1 or MXH21-31
** when equipped with harness PNR MXH61 or MXH61-30

Table 1003 / TESTING TABLE VERSUS CREW OXYGEN MASK REGULATOR PART
NUMBER

SUBTASK 35-13-63-790-001-A01
B. Test of the Mask-Regulator Overall Leakage
(Refer to Fig. 1001)
(1) Test set up Data
(a) Do the test in the test set-up shown in figure 1001.

Page 1011
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

(b) Connect the mask regulator to the oxygen supply with the coupling (3, figure
9001).
NOTE : If necessary, install the adaptor (6, figure 9001).
(c) Install the Crew Oxygen Mask Regulator into the test chamber.
(2) Procedure

ACTION RESULT

1 Make the oxygen supply pressure

stable at the value given in the
relevant testing table.
2 Set the dilution control to “N”. Make sure that the leak rate at ground
level is less than the value given in the
relevant testing table.
3 Do the test again with the dilution
control set to "100%".

SUBTASK 35-13-63-790-002-A01
C. Test of the mask-Regulator Inward leakage
(Refer to Fig. 1002)
(1) Test set up Data
(a) Do the test in the test set-up shown in figure 1002.
(b) If necessary, install the mask on the regulator (Refer to SUBTASK
35-13-63-420-004-A01) .
(c) If necessary, install the inflatable harness (Refer to SUBTASK
35-13-63-420-005-A01).
(d) Install the mask support assembly (2, figure 9001) on the test box
(4, figure 9001).
(e) Install the mask-regulator on the test set-up.
(f) Install the plug (1, figure 9001) to the regulator supply hose.
(2) Procedure

ACTION RESULT

1 Set the dilution control to "100%".

Page 1012
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

ACTION RESULT

2 Operate the vacuum valve until Make sure that the leak rate is not more
you get a negative pressure at the than the value given in the relevant
value given in the relevant testing testing table.
table.

SUBTASK 35-13-63-790-003-A01
D. Goggle venting valve flow test
(Refer to Fig. 1003)
(1) Test set up Data
(a) Do the test in the test set-up shown in figure 1003.
(b) If necessary, install the mask on the regulator (Refer to SUBTASK
35-13-63-420-004-A01).
(c) If necessary, install the inflatable harness (Refer to SUBTASK
35-13-63-420-005-A01).
(d) Install the mask support assembly (2, figure 9001) on the test box
(4, figure 9001).
(e) Install the mask-regulator on the test set-up.
(f) Install the plug (1, figure 9001) to the regulator supply hose.
(g) Set the venting valve control to “ON”.
(2) Procedure

ACTION RESULT

1 Set the dilution control to "100%".

2 Set the vent valve control to "ON".
3 Apply a mask pressure to the mask Make sure that you can feel a light flow
face piece in accordance with the at the valve outlet.
value given in the relevant testing
table.

Page 1013
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

SUBTASK 35-13-63-790-004-A01
E. Test of the Time to Inflate the Inflatable Harness
(1) Test set up Data
(a) If necessary, install the inflatable harness on the regulator (Refer to SUBTASK
35-13-63-420-005-A01).
(b) Connect the regulator to the oxygen supply with the coupling (3, figure 9001).
(2) Procedure

ACTION RESULT

1 Make the oxygen supply pressure

stable at the value given in the
relevant testing table.
2 Push the harness inflation plate. Make sure that the harness is fully
inflated in one second maximum.
Make sure that there is no noticeable
flow.
3 Applicable to harness with comfort Make sure that the harness is fully
function: Release the harness deflated in two second maximum.
inflation plate.

SUBTASK 35-13-63-790-005-A01
F. Test of the time and the comfort function
(1) Test set up Data
(a) If necessary, install the inflatable harness on the regulator (Refer to SUBTASK
35-13-63-420-005-A01).
(b) Connect the regulator to the oxygen supply with the coupling (3, figure 9001).
(2) Procedure (Applicable to inflatable harness MXH20 or MXH21)

ACTION RESULT

1 Make the oxygen supply pressure

stable at the value given in the
relevant testing table.
2 Switch the toggle to “NORM”
position.

Page 1014
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

ACTION RESULT

3 Set the roller in “MAX” position.

4 Push the harness inflation plate. Make sure that the harness is fully
inflated in one second maximum.
5 Release the harness inflation plate. Make sure that the harness is fully
deflated in two seconds maximum.
6 Switch the toggle to “COMF”
position.
7 Set the roller in “MIN” position.
8 Push the harness inflation plate for
six to seven seconds.
9 Release the harness inflation plate After 5 minutes, make sure that there
is a residual pressure inside the tube.
Make sure that there is no noticeable
flow.

(3) Procedure (Applicable to inflatable harness MXH61)

ACTION RESULT

1 Make the oxygen supply pressure

stable at the value given in the
relevant testing table.
2 Push the comfort knob to inflation Make sure that the harness inflates
position (first position). slowly.
3 Release the comfort knob. Make sure that the comfort knob stays
in the “COMFORT” position.
Make sure that the harness does not
inflate any more.
4 Wait for five minutes, squeeze the Make sure that the residual pressure
harness hose between thumb and stays.
forefinger.
5 Push again the comfort knob to Make sure that the harness deflates
deflation position (second position). slowly.

Page 1015
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

ACTION RESULT

6 Release the comfort knob. Make sure that the comfort knob stays
in the “COMFORT” position.
Make sure that the harness does not
deflate any more.
7 Push the harness inflation plate. Make sure that the comfort knob return
in the “NORMAL” position.
Make sure that the harness is fully
inflated in one second maximum.
8 Release the harness inflation plate.

SUBTASK 35-13-63-720-006-A01
G. Test of the Microphone and of the Leads
(Refer to Fig. 1004)
(1) Test set up Data
(a) Do the test in the test set-up shown in figure 1004.
(b) Connect the radio cord to the amplifier.
NOTE : The amplifier must have similar characteristics to the one used in
the aircraft installation for the corresponding equipment.
(2) Procedure

ACTION RESULT

1 Speak into the microphone. Make sure that you can hear a loud
and clear voice in the earphones.

(3) Altenative method

ACTION RESULT

1 Connect the radio cord to the test

bench.

Page 1016
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

ACTION RESULT

2 Set the test bench to the value Make sure that there is electrical
given in table 1004. continuity on the microphone leads.

(4) On-aircraft test

ACTION RESULT

1 Make sure that the mask is

supplied with oxygen and that the
box left door is opened (Thus the
pneumatic valve is opened and the
micro switch activated).
2 Speak into the microphone. Make sure that you can hear a loud and
clear voice in the aircraft loud speakers.

MXA Series LOAD IMPEDANCE PRE AMPLIFIER

MICROPHONE
PNR (Ohm) EMBODIED (*)
MXA1006 230SP4 100 YES
MXA1012 804SP1-1208 5 NO
MXA1016 P1333 100 YES
MXA1018 811SP7 100 YES
MXA1021 804SP3-1210 75 NO
MXA1031 1180-2-1 200 YES
MXA1033 811SP6 or 170 (100 acceptable)
YES
S4045–1 100
MXA1035 S4045-1 100 YES
MXA1036 S4042 20 (5 or 75 acceptable) NO
MXA1038 S4042 20 (5 or 75 acceptable) NO
MXA1040 CE101M 5 NO
MXA1041 S4045-2 100 YES
MXA1042 S4045-1 100 YES
MXA1044 804SP4-1215 200 YES
MXA1045 S4045-3 100 YES
* YES = HIGH LEVEL, NO = LOW LEVEL

Page 1017
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

MXA Series LOAD IMPEDANCE PRE AMPLIFIER

MICROPHONE
PNR (Ohm) EMBODIED (*)
MXA1046 P2613 200 YES
MXA1049 64220-003 100 YES
MXA1050 S4045 100 YES
MXA1051 P2331 100 YES
MXA1052 M101AIC 5 NO
MXA1054 70655-002 100 YES
MXA1059 00-7318 5 NO
* YES = HIGH LEVEL, NO = LOW LEVEL

Table 1004 / MICROPHONE TEST ACCOUSTIC IMPEDANCE VALUES VERSUS MXA

SERIES PART NUMBER

SUBTASK 35-13-63-720-007-A01
H. Test of the Noise Cancellation Function (when applicable)
(Refer to Fig. 1006)
(1) Test set up Data
(a) Do the test in the test set-up shown in figure 1006 sheet 1/2.
(b) Install the mask support assembly (2, figure 9001) on the test box (4, figure
9001).
(c) Install the mask-regulator on the test set-up.
(d) Connect the mask regulator to the oxygen supply with the coupling (3, figure
9001).
NOTE : Install the in-line flow indicator vertically in order the oxygen flow
circulates from down to top.
(e) Connect the radio cord to the amplifier.
NOTE : The amplifier must have similar characteristics to the one used in
the aircraft installation for the corresponding equipment.
(2) Procedure

ACTION RESULT

1 Set the dilution control to “100%”

2 Set the manual switch, located on
the casing attached to the in-line
flow indicator, to “NORMAL”

Page 1018
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

ACTION RESULT

3 Make the oxygen supply pressure

stable at the value given in the
relevant testing table
4 Operate the vacuum and adjust the Make sure that the audio circuit does
valve V2 until you get a demand not operate (you must not hear the
flow at the value given in the oxygen flow)
relevant testing table
5 Reduce the demand flow to 0 L/min Make sure that the audio circuit
operates again (you must hear the
oxygen flow)
6 Set the manual switch, located on
the casing attached to the in-line
flow indicator, to “OVERRIDE”
7 Operate the vacuum and adjust the Make sure that the audio circuit
valve V2 until you get a demand operates (you must hear the oxygen
flow at the value given in the flow)
relevant testing table

SUBTASK 35-13-63-710-007-A01
I. Test of the Tightening of the Mask Lock
(1) Procedure

ACTION RESULT

1 Check the mask lock position. Make sure that the mask lock is
positioned between the two moulded
stops of the shell.
2 Check the tightening of the Make sure that the attaching screw
attaching screw (-80) or the (-80) or the attaching screw part of the
attaching screw part of the mask mask lock assembly (70A) is tightened
lock assembly (70A). to the torque value specified in table
8001.

Page 1019
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

SUBTASK 35-13-63-710-008-A01
J. Test of the “PRESS TO TEST” / “EMERGENCY” knob
(Refer to Fig. 1005)
(1) Test set up Data
(a) Do the test in the test set-up shown in figure 1005.
(b) Connect the mask regulator to the oxygen supply with the coupling (3, figure
9001).
NOTE : If necessary, install the adaptor (6, figure 9001).
(2) Procedure

ACTION RESULT

1 Make the oxygen supply pressure

stable at the value given in the
relevant testing table.
2 Push the “PRESS TO TEST” knob. Make sure that there is a continuous
flow.
3 Set the “EMERGENCY” knob to Make sure that there is a continuous
the “EMERGENCY” position. flow.

SUBTASK 35-13-63-710-009-A01
K. Test of the IN-LINE FLOW INDICATOR (when applicable)
(Refer to Fig. 1006)
(1) Test set up Data
(a) Do the test in the test set-up shown in figure 1006 sheet 2/2.
(b) Install the mask support assembly (2, figure 9001) on the test box (4, figure
9001).
(c) Install the mask-regulator on the test set-up.
(d) Connect the mask regulator to the oxygen supply with the coupling (3, figure
9001).
NOTE : If necessary, install the adaptor (6, figure 9001).
(2) Procedure

ACTION RESULT

1 Set the dilution control to “100%”.

Page 1020
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

ACTION RESULT

2 Make the oxygen supply pressure

stable at the value given in the
relevant testing table.
3 Operate the vacuum valve until Make sure that the in-line flow indicator
you get a demand flow at the value turns from red or black (it depends on
given in the relevant testing table. the type) to transparent.

Page 1021
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

THIS PAGE INTENTIONALLY LEFT BLANK

Page 1022
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TASK 35-13-63-700-803-A01
3. TESTING TABLE 1005

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

MASK REGULATOR OVERALL LEAKAGE (Refer to SUBTASK 35-13-63-790-001-A01)

“N” 0,62 MPa < 0,01 L/min

“100%” 0,62 MPa < 0,01 L/min

MASK REGULATOR INWARD LEAKAGE (Refer to SUBTASK 35-13-63-790-002-A01)

< 0,150
“100 %” PLUGGED 1 kPa
L/min

GOGGLES VENTING VALVE FLOW TEST (Refer to SUBTASK 35-13-63-790-003-A01)

Light flow
“100 %” PLUGGED 0,25 kPa
noticeable

HARNESS INFLATION TIME AND COMFORT FUNCTIONS (Refer to SUBTASK 35-13-63-790-004-A01) and (Refer to
SUBTASK 35-13-63-790-005-A01)

TOGGLE ROLLER

Standard Full inflation

0,42 MPa
harness ≤ 1s

Full inflation
Comfort harness 0,48 MPa NORM MAX
≤ 1s
(When
applicable) Full deflation
0,48 MPa NORM MAX
≤ 2s
Residual
0,48 MPa COMF MIN
pressure

No
All type of
noticeable
harness
flow

MICROPHONE AND LEADS CHECK (Refer to SUBTASK 35-13-63-720-006-A01)

Good
Good operation
operation

MASK REGULATOR LOCK (Refer to SUBTASK 35-13-63-710-007-A01)

Position and
Position and tightening (refer to table 8001)
tightening

PRESS TO TEST / EMERGENCY KNOB (Refer to SUBTASK 35-13-63-710-008-A01)

“PRESS TO Continuous
0,50 MPa
TEST” knob flow
EMERGENCY Continuous
0,50 MPa
knob flow

Page 1023
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

IN-LINE FLOW INDICATOR (When applicable) (Refer to SUBTASK 35-13-63-710-009-A01)

Indicator
turns from
“100 %” 0,48 MPa 10 L/min red or
black to
transparent

OXYGEN REGULATOR PERFORMANCE

Testing table attached

Table 1005 / TESTING TABLE

Control Test Bench PNR: Tested by : Stamp :

SER: Date of test :

Page 1024
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TASK 35-13-63-700-804-A01
4. TESTING TABLE 1006

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

MASK REGULATOR OVERALL LEAKAGE (Refer to SUBTASK 35-13-63-790-001-A01)

”N” 0,62 MPa < 0,01 L/min

”100%” 0,62 MPa < 0,01 L/min

MASK REGULATOR INWARD LEAKAGE (Refer to SUBTASK 35-13-63-790-002-A01)

< 0,150
“100 %” PLUGGED 1 kPa
L/min

GOGGLES VENTING VALVE FLOW TEST (Refer to SUBTASK 35-13-63-790-003-A01)

Light flow
“100 %” PLUGGED 0,25 kPa
noticeable

HARNESS INFLATION TIME AND COMFORT FUNCTIONS (Refer to SUBTASK 35-13-63-790-004-A01) and (Refer to
SUBTASK 35-13-63-790-005-A01)

TOGGLE ROLLER

Standard Full inflation

0,48 MPa
harness ≤ 1s

Full inflation
Comfort harness 0,48 MPa NORM MAX
≤ 1s
(When
applicable) Full deflation
0,48 MPa NORM MAX
≤ 2s
Residual
0,48 MPa COMF MIN
pressure

No
All type of
noticeable
harness
flow

MICROPHONE AND LEADS CHECK (Refer to SUBTASK 35-13-63-720-006-A01)

Good
Good operation
operation

MASK REGULATOR LOCK (Refer to SUBTASK 35-13-63-710-007-A01)

Position and
Position and tightening (refer to table 8001)
tightening

PRESS TO TEST / EMERGENCY KNOB (Refer to SUBTASK 35-13-63-710-008-A01)

“PRESS TO Continuous
0,50 MPa
TEST” knob flow
EMERGENCY Continuous
0,50 MPa
knob flow

Page 1025
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

IN-LINE FLOW INDICATOR (When applicable) (Refer to SUBTASK 35-13-63-710-009-A01)

Indicator
turns from
“100 %” 0,48 MPa 10 L/min red or
black to
transparent

OXYGEN MASK REGULATOR

Testing table attached

Table 1006 / TESTING TABLE

Control Test Bench PNR: Tested by : Stamp :

SER: Date of test :

Page 1026
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TASK 35-13-63-700-805-A01
5. TESTING TABLE 1007

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

MASK REGULATOR OVERALL LEAKAGE (Refer to SUBTASK 35-13-63-790-001-A01)

”N” 0,62 MPa < 0,01 L/min

”100%” 0,62 MPa < 0,01 L/min

MASK REGULATOR INWARD LEAKAGE (Refer to SUBTASK 35-13-63-790-002-A01)

< 0,150
“100 %” PLUGGED 1 kPa
L/min

GOGGLES VENTING VALVE FLOW TEST (Refer to SUBTASK 35-13-63-790-003-A01)

Light flow
“100 %” PLUGGED 0,25 kPa
noticeable

HARNESS INFLATION TIME AND COMFORT FUNCTIONS (Refer to SUBTASK 35-13-63-790-004-A01) and (Refer to
SUBTASK 35-13-63-790-005-A01)

TOGGLE ROLLER

Standard Full inflation

0,50 MPa
harness ≤ 1s

Full inflation
Comfort harness 0,50 MPa NORM MAX
≤ 1s
(When
applicable) Full deflation
0,50 MPa NORM MAX
≤ 2s
Residual
0,50 MPa COMF MIN
pressure

No
All type of
noticeable
harness
flow

MICROPHONE AND LEADS CHECK (Refer to SUBTASK 35-13-63-720-006-A01)

Good
Good operation
operation

MASK REGULATOR LOCK (Refer to SUBTASK 35-13-63-710-007-A01)

Position and
Position and tightening (refer to table 8001)
tightening

PRESS TO TEST / EMERGENCY KNOB (Refer to SUBTASK 35-13-63-710-008-A01)

“PRESS TO Continuous
0,50 MPa
TEST” knob flow
EMERGENCY Continuous
0,50 MPa
knob flow

Page 1027
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

IN-LINE FLOW INDICATOR (When applicable) (Refer to SUBTASK 35-13-63-710-009-A01)

Indicator
turns from
“100 %” 0,57 MPa 10 L/min red or
black to
transparent

OXYGEN REGULATOR PERFORMANCE

Testing table attached

Table 1007 / TESTING TABLE

Control Test Bench PNR: Tested by : Stamp :

SER: Date of test :

Page 1028
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TASK 35-13-63-700-806-A01
6. TESTING TABLE 1008

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

MASK REGULATOR OVERALL LEAKAGE (Refer to SUBTASK 35-13-63-790-001-A01)

”N” 0,55 MPa < 0,01 L/min

”100%” 0,55 MPa < 0,01 L/min

MASK REGULATOR INWARD LEAKAGE (Refer to SUBTASK 35-13-63-790-002-A01)

< 0,150
“100 %” PLUGGED 1 kPa
L/min

GOGGLES VENTING VALVE FLOW TEST (Refer to SUBTASK 35-13-63-790-003-A01)

Light flow
“100 %” PLUGGED 0,25 kPa
noticeable

HARNESS INFLATION TIME AND COMFORT FUNCTIONS (Refer to SUBTASK 35-13-63-790-004-A01) and (Refer to
SUBTASK 35-13-63-790-005-A01)

TOGGLE ROLLER

Standard Full inflation

0,42 MPa
harness ≤ 1s

Full inflation
Comfort harness 0,46 MPa NORM MAX
≤ 1s
(When
applicable) Full deflation
0,46 MPa NORM MAX
≤ 2s
Residual
0,46 MPa COMF MIN
pressure

No
All type of
noticeable
harness
flow

MICROPHONE AND LEADS CHECK (Refer to SUBTASK 35-13-63-720-006-A01)

Good
Good operation
operation

MASK REGULATOR LOCK (Refer to SUBTASK 35-13-63-710-007-A01)

Position and
Position and tightening (refer to table 8001)
tightening

PRESS TO TEST / EMERGENCY KNOB (Refer to SUBTASK 35-13-63-710-008-A01)

“PRESS TO Continuous
0,50 MPa
TEST” knob flow
EMERGENCY Continuous
0,50 MPa
knob flow

Page 1029
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

IN-LINE FLOW INDICATOR (When applicable) (Refer to SUBTASK 35-13-63-710-009-A01)

Indicator
turns from
“100 %” 0,48 MPa 10 L/min red or
black to
transparent

OXYGEN REGULATOR PERFORMANCE

Testing table attached

Table 1008 / TESTING TABLE

Control Test Bench PNR: Tested by : Stamp :

SER: Date of test :

Page 1030
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TASK 35-13-63-700-807-A01
7. TESTING TABLE 1009

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

MASK REGULATOR OVERALL LEAKAGE (Refer to SUBTASK 35-13-63-790-001-A01)

”N” 0,59 MPa < 0,01 L/min

”100%” 0,59 MPa < 0,01 L/min

MASK REGULATOR INWARD LEAKAGE (Refer to SUBTASK 35-13-63-790-002-A01)

< 0,150
“100 %” PLUGGED 1 kPa
L/min

GOGGLES VENTING VALVE FLOW TEST (Refer to SUBTASK 35-13-63-790-003-A01)

Light flow
“100 %” PLUGGED 0,25 kPa
noticeable

HARNESS INFLATION TIME AND COMFORT FUNCTIONS (Refer to SUBTASK 35-13-63-790-004-A01) and (Refer to
SUBTASK 35-13-63-790-005-A01)

TOGGLE ROLLER

Standard Full inflation

0,42 MPa
harness ≤ 1s

Full inflation
Comfort harness 0,50 MPa NORM MAX
≤ 1s
(When
applicable) Full deflation
0,50 MPa NORM MAX
≤ 2s
Residual
0,50 MPa COMF MIN
pressure

No
All type of
noticeable
harness
flow

MICROPHONE AND LEADS CHECK (Refer to SUBTASK 35-13-63-720-006-A01)

Good
Good operation
operation

MASK REGULATOR LOCK (Refer to SUBTASK 35-13-63-710-007-A01)

Position and
Position and tightening (refer to table 8001)
tightening

PRESS TO TEST / EMERGENCY KNOB (Refer to SUBTASK 35-13-63-710-008-A01)

“PRESS TO Continuous
0,50 MPa
TEST” knob flow
EMERGENCY Continuous
0,50 MPa
knob flow

Page 1031
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

IN-LINE FLOW INDICATOR (When applicable) (Refer to SUBTASK 35-13-63-710-009-A01)

Indicator
turns from
“100 %” 0,55 MPa 10 L/min red or
black to
transparent

OXYGEN REGULATOR PERFORMANCE

Testing table attached

Table 1009 / TESTING TABLE

Control Test Bench PNR: Tested by : Stamp :

SER: Date of test :

Page 1032
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TASK 35-13-63-700-808-A01
8. TESTING TABLE 1010

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

MASK REGULATOR OVERALL LEAKAGE (Refer to SUBTASK 35-13-63-790-001-A01)

”N” 0,55 MPa < 0,01 L/min

”100%” 0,55 MPa < 0,01 L/min

MASK REGULATOR INWARD LEAKAGE (Refer to SUBTASK 35-13-63-790-002-A01)

< 0,150
“100 %” PLUGGED 1 kPa
L/min

GOGGLES VENTING VALVE FLOW TEST (Refer to SUBTASK 35-13-63-790-003-A01)

Light flow
“100 %” PLUGGED 0,25 kPa
noticeable

HARNESS INFLATION TIME AND COMFORT FUNCTIONS (Refer to SUBTASK 35-13-63-790-004-A01) and (Refer to
SUBTASK 35-13-63-790-005-A01)

TOGGLE ROLLER

Standard Full inflation

0,45 MPa
harness ≤ 1s

Full inflation
Comfort harness 0,45 MPa NORM MAX
≤ 1s
(When
applicable) Full deflation
0,45 MPa NORM MAX
≤ 2s
Residual
0,45 MPa COMF MIN
pressure

No
All type of
noticeable
harness
flow

MICROPHONE AND LEADS CHECK (Refer to SUBTASK 35-13-63-720-006-A01)

Good
Good operation
operation

MASK REGULATOR LOCK (Refer to SUBTASK 35-13-63-710-007-A01)

Position and
Position and tightening (refer to table 8001)
tightening

PRESS TO TEST / EMERGENCY KNOB (Refer to SUBTASK 35-13-63-710-008-A01)

“PRESS TO Continuous
0,50 MPa
TEST” knob flow
EMERGENCY Continuous
0,50 MPa
knob flow

Page 1033
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

IN-LINE FLOW INDICATOR (When applicable) (Refer to SUBTASK 35-13-63-710-009-A01)

Indicator
turns from
“100 %” 0,48 MPa 10 L/min red or
black to
transparent

OXYGEN REGULATOR PERFORMANCE

Testing table attached

Table 1010 / TESTING TABLE

Control Test Bench PNR: Tested by : Stamp :

SER: Date of test :

Page 1034
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TASK 35-13-63-700-809-A01
9. TESTING TABLE 1011

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

MASK REGULATOR OVERALL LEAKAGE (Refer to SUBTASK 35-13-63-790-001-A01)

”N” 0,65 MPa < 0,01 L/min

”100%” 0,65 MPa < 0,01 L/min

MASK REGULATOR INWARD LEAKAGE (Refer to SUBTASK 35-13-63-790-002-A01)

< 0,150
“100 %” PLUGGED 1 kPa
L/min

GOGGLES VENTING VALVE FLOW TEST (Refer to SUBTASK 35-13-63-790-003-A01)

Light flow
“100 %” PLUGGED 0,25 kPa
noticeable

HARNESS INFLATION TIME AND COMFORT FUNCTIONS (Refer to SUBTASK 35-13-63-790-004-A01) and (Refer to
SUBTASK 35-13-63-790-005-A01)

TOGGLE ROLLER

Standard Full inflation

0,45 MPa
harness ≤ 1s

Full inflation
Comfort harness 0,50 MPa NORM MAX
≤ 1s
(When
applicable) Full deflation
0,50 MPa NORM MAX
≤ 2s
Residual
0,50 MPa COMF MIN
pressure

No
All type of
noticeable
harness
flow

MICROPHONE AND LEADS CHECK (Refer to SUBTASK 35-13-63-720-006-A01)

Good
Good operation
operation

MASK REGULATOR LOCK (Refer to SUBTASK 35-13-63-710-007-A01)

Position and
Position and tightening (refer to table 8001)
tightening

PRESS TO TEST / EMERGENCY KNOB (Refer to SUBTASK 35-13-63-710-008-A01)

“PRESS TO Continuous
0,50 MPa
TEST” knob flow
EMERGENCY Continuous
0,50 MPa
knob flow

Page 1035
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

IN-LINE FLOW INDICATOR (When applicable) (Refer to SUBTASK 35-13-63-710-009-A01)

Indicator
turns from
“100 %” 0,52 MPa 10 L/min red or
black to
transparent

OXYGEN REGULATOR PERFORMANCE

Testing table attached

Table 1011 / TESTING TABLE

Control Test Bench PNR: Tested by : Stamp :

SER: Date of test :

Page 1036
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TASK 35-13-63-700-810-A01
10. TESTING TABLE 1012

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

MASK REGULATOR OVERALL LEAKAGE (Refer to SUBTASK 35-13-63-790-001-A01)

”N” 0,65 MPa < 0,01 L/min

”100%” 0,65 MPa < 0,01 L/min

MASK REGULATOR INWARD LEAKAGE (Refer to SUBTASK 35-13-63-790-002-A01)

< 0,150
“100 %” PLUGGED 1 kPa
L/min

GOGGLES VENTING VALVE FLOW TEST (Refer to SUBTASK 35-13-63-790-003-A01)

Light flow
“100 %” PLUGGED 0,25 kPa
noticeable

HARNESS INFLATION TIME AND COMFORT FUNCTIONS (Refer to SUBTASK 35-13-63-790-004-A01) and (Refer to
SUBTASK 35-13-63-790-005-A01)

TOGGLE ROLLER

Standard Full inflation

0,48 MPa
harness ≤ 1s

Full inflation
Comfort harness 0,52 MPa NORM MAX
≤ 1s
(When
applicable) Full deflation
0,52 MPa NORM MAX
≤ 2s
Residual
0,52 MPa COMF MIN
pressure

No
All type of
noticeable
harness
flow

MICROPHONE AND LEADS CHECK (Refer to SUBTASK 35-13-63-720-006-A01)

Good
Good operation
operation

MASK REGULATOR LOCK (Refer to SUBTASK 35-13-63-710-007-A01)

Position and
Position and tightening (refer to table 8001)
tightening

PRESS TO TEST / EMERGENCY KNOB (Refer to SUBTASK 35-13-63-710-008-A01)

“PRESS TO Continuous
0,50 MPa
TEST” knob flow
EMERGENCY Continuous
0,50 MPa
knob flow

Page 1037
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

IN-LINE FLOW INDICATOR (When applicable) (Refer to SUBTASK 35-13-63-710-009-A01)

Indicator
turns from
“100 %” 0,57 MPa 10 L/min red or
black to
transparent

OXYGEN REGULATOR PERFORMANCE

Testing table attached

Table 1012 / TESTING TABLE

Control Test Bench PNR: Tested by : Stamp :

SER: Date of test :

Page 1038
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TASK 35-13-63-700-811-A01
11. TESTING TABLE 1013

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

MASK REGULATOR OVERALL LEAKAGE (Refer to SUBTASK 35-13-63-790-001-A01)

”N” 0,65 MPa < 0,01 L/min

”100%” 0,65 MPa < 0,01 L/min

MASK REGULATOR INWARD LEAKAGE (Refer to SUBTASK 35-13-63-790-002-A01)

< 0,150
“100 %” PLUGGED 1 kPa
L/min

GOGGLES VENTING VALVE FLOW TEST (Refer to SUBTASK 35-13-63-790-003-A01)

Light flow
“100 %” PLUGGED 0,25 kPa
noticeable

HARNESS INFLATION TIME AND COMFORT FUNCTIONS (Refer to SUBTASK 35-13-63-790-004-A01) and (Refer to
SUBTASK 35-13-63-790-005-A01)

TOGGLE ROLLER

Standard Full inflation

0,48 MPa
harness ≤ 1s

Full inflation
Comfort harness 0,54 MPa NORM MAX
≤ 1s
(When
applicable) Full deflation
0,54 MPa NORM MAX
≤ 2s
Residual
0,54 MPa COMF MIN
pressure

No
All type of
noticeable
harness
flow

MICROPHONE AND LEADS CHECK (Refer to SUBTASK 35-13-63-720-006-A01)

Good
Good operation
operation

MASK REGULATOR LOCK (Refer to SUBTASK 35-13-63-710-007-A01)

Position and
Position and tightening (refer to table 8001)
tightening

PRESS TO TEST / EMERGENCY KNOB (Refer to SUBTASK 35-13-63-710-008-A01)

“PRESS TO Continuous
0,50 MPa
TEST” knob flow
EMERGENCY Continuous
0,50 MPa
knob flow

Page 1039
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

IN-LINE FLOW INDICATOR (When applicable) (Refer to SUBTASK 35-13-63-710-009-A01)

Indicator
turns from
“100 %” 0,57 MPa 10 L/min red or
black to
transparent

OXYGEN REGULATOR PERFORMANCE

Testing table attached

Table 1013 / TESTING TABLE

Control Test Bench PNR: Tested by : Stamp :

SER: Date of test :

Page 1040
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TASK 35-13-63-700-812-A01
12. TESTING TABLE 1014

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

MASK REGULATOR OVERALL LEAKAGE (Refer to SUBTASK 35-13-63-790-001-A01)

”N” 0,65 MPa < 0,02 L/min

”100%” 0,65 MPa < 0,02 L/min

MASK REGULATOR INWARD LEAKAGE (Refer to SUBTASK 35-13-63-790-002-A01)

< 0,150
“100 %” PLUGGED 1 kPa
L/min

GOGGLES VENTING VALVE FLOW TEST (Refer to SUBTASK 35-13-63-790-003-A01)

Light flow
“100 %” PLUGGED 0,25 kPa
noticeable

HARNESS INFLATION TIME AND COMFORT FUNCTIONS (Refer to SUBTASK 35-13-63-790-004-A01) and (Refer to
SUBTASK 35-13-63-790-005-A01)

TOGGLE ROLLER

Standard Full inflation

0,52 MPa
harness ≤ 1s

Full inflation
Comfort harness 0,55 MPa NORM MAX
≤ 1s
(When
applicable) Full deflation
0,55 MPa NORM MAX
≤ 2s
Residual
0,55 MPa COMF MIN
pressure

No
All type of
noticeable
harness
flow

MICROPHONE AND LEADS CHECK (Refer to SUBTASK 35-13-63-720-006-A01)

Good
Good operation
operation

MASK REGULATOR LOCK (Refer to SUBTASK 35-13-63-710-007-A01)

Position and
Position and tightening (refer to table 8001)
tightening

PRESS TO TEST / EMERGENCY KNOB (Refer to SUBTASK 35-13-63-710-008-A01)

“PRESS TO Continuous
0,50 MPa
TEST” knob flow
EMERGENCY Continuous
0,50 MPa
knob flow

Page 1041
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

IN-LINE FLOW INDICATOR (When applicable) (Refer to SUBTASK 35-13-63-710-009-A01)

Indicator
turns from
“100 %” 0,59 MPa 10 L/min red or
black to
transparent

OXYGEN MASK REGULATOR

Testing table attached

Table 1014 / TESTING TABLE

Control Test Bench PNR: Tested by : Stamp :

SER: Date of test :

Page 1042
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TASK 35-13-63-700-813-A01
13. TESTING TABLE 1015

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

MASK REGULATOR OVERALL LEAKAGE (Refer to SUBTASK 35-13-63-790-001-A01)

”N” 0,59 MPa < 0,01 L/min

”100%” 0,59 MPa < 0,01 L/min

MASK REGULATOR INWARD LEAKAGE (Refer to SUBTASK 35-13-63-790-002-A01)

< 0,150
“100 %” PLUGGED 1 kPa
L/min

GOGGLES VENTING VALVE FLOW TEST (Refer to SUBTASK 35-13-63-790-003-A01)

Light flow
“100 %” PLUGGED 0,25 kPa
noticeable

HARNESS INFLATION TIME AND COMFORT FUNCTIONS (Refer to SUBTASK 35-13-63-790-004-A01) and (Refer to
SUBTASK 35-13-63-790-005-A01)

TOGGLE ROLLER

Standard Full inflation

0,50 MPa
harness ≤ 1s

Full inflation
Comfort harness 0,50 MPa NORM MAX
≤ 1s
(When
applicable) Full deflation
0,50 MPa NORM MAX
≤ 2s
Residual
0,50 MPa COMF MIN
pressure

No
All type of
noticeable
harness
flow

MICROPHONE AND LEADS CHECK (Refer to SUBTASK 35-13-63-720-006-A01)

Good
Good operation
operation

MASK REGULATOR LOCK (Refer to SUBTASK 35-13-63-710-007-A01)

Position and
Position and tightening (refer to table 8001)
tightening

PRESS TO TEST / EMERGENCY KNOB (Refer to SUBTASK 35-13-63-710-008-A01)

“PRESS TO Continuous
0,50 MPa
TEST” knob flow
EMERGENCY Continuous
0,50 MPa
knob flow

Page 1043
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

IN-LINE FLOW INDICATOR (When applicable) (Refer to SUBTASK 35-13-63-710-009-A01)

Indicator
turns from
“100 %” 0,55 MPa 10 L/min red or
black to
transparent

OXYGEN MASK REGULATOR

Testing table attached

Table 1015 / TESTING TABLE

Control Test Bench PNR: Tested by : Stamp :

SER: Date of test :

Page 1044
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TASK 35-13-63-700-814-A01
14. TESTING TABLE 1016

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

MASK REGULATOR OVERALL LEAKAGE (Refer to SUBTASK 35-13-63-790-001-A01)

”N” 0,59 MPa < 0,01 L/min

”100%” 0,59 MPa < 0,01 L/min

MASK REGULATOR INWARD LEAKAGE (Refer to SUBTASK 35-13-63-790-002-A01)

< 0,150
“100 %” PLUGGED 1 kPa
L/min

GOGGLES VENTING VALVE FLOW TEST (Refer to SUBTASK 35-13-63-790-003-A01)

Light flow
“100 %” PLUGGED 0,25 kPa
noticeable

HARNESS INFLATION TIME AND COMFORT FUNCTIONS (Refer to SUBTASK 35-13-63-790-004-A01)and (Refer to
SUBTASK 35-13-63-790-005-A01)

Full inflation
0,50 MPa
≤ 1s
Full deflation
0,50 MPa
≤ 2s

Comfort knob to Slow

0,50 MPa
inflation position inflation
Stays in
Comfort knob
0,50 MPa “COMFORT”
released
position
Residual
After 5 minutes 0,50 MPa
pressure
Comfort knob to Slow
0,50 MPa
deflation position deflation
Stays in
Comfort knob
0,50 MPa “COMFORT”
released
position
Comfort
knob to
Harness inflation “NORMAL”
0,50 MPa position
plate depressed
Full inflation
≤ 1s

MICROPHONE AND LEADS CHECK (Refer to SUBTASK 35-13-63-720-006-A01)

Good
Good operation
operation

Page 1045
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

MASK REGULATOR LOCK (Refer to SUBTASK 35-13-63-710-007-A01)

Position and
Position and tightening (refer to table 8001)
tightening

PRESS TO TEST / EMERGENCY KNOB (Refer to SUBTASK 35-13-63-710-008-A01)

“PRESS TO Continuous
0,50 MPa
TEST” knob flow
EMERGENCY Continuous
0,50 MPa
knob flow

IN-LINE FLOW INDICATOR (When applicable) (Refer to SUBTASK 35-13-63-710-009-A01)

Indicator
turns from
“100 %” 0,55 MPa 10 L/min red or
black to
transparent

OXYGEN REGULATOR PERFORMANCE

Testing table attached

Table 1016 / TESTING TABLE

Control Test Bench PNR: Tested by : Stamp :

SER: Date of test :

Page 1046
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TASK 35-13-63-700-815-A01
15. TESTING TABLE 1017

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

MASK REGULATOR OVERALL LEAKAGE (Refer to SUBTASK 35-13-63-790-001-A01)

”N” 0,65 MPa < 0,01 L/min

”100%” 0,65 MPa < 0,01 L/min

MASK REGULATOR INWARD LEAKAGE (Refer to SUBTASK 35-13-63-790-002-A01)

< 0,150
“100 %” PLUGGED 1 kPa
L/min

GOGGLES VENTING VALVE FLOW TEST (Refer to SUBTASK 35-13-63-790-003-A01)

Light flow
“100 %” PLUGGED 0,25 kPa
noticeable

HARNESS INFLATION TIME AND COMFORT FUNCTIONS (Refer to SUBTASK 35-13-63-790-004-A01)and (Refer to
SUBTASK 35-13-63-790-005-A01)

Full inflation
0,50 MPa
≤ 1s
Full deflation
0,50 MPa
≤ 2s

Comfort knob to Slow

0,50 MPa
inflation position inflation
Stays in
Comfort knob
0,50 MPa “COMFORT”
released
position
Residual
After 5 minutes 0,50 MPa
pressure
Comfort knob to Slow
0,50 MPa
deflation position deflation
Stays in
Comfort knob
0,50 MPa “COMFORT”
released
position
Comfort
knob to
Harness inflation “NORMAL”
0,50 MPa position
plate depressed
Full inflation
≤ 1s

MICROPHONE AND LEADS CHECK (Refer to SUBTASK 35-13-63-720-006-A01)

Good
Good operation
operation

Page 1047
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

MASK REGULATOR LOCK (Refer to SUBTASK 35-13-63-710-007-A01)

Position and
Position and tightening (refer to table 8001)
tightening

PRESS TO TEST / EMERGENCY KNOB (Refer to SUBTASK 35-13-63-710-008-A01)

“PRESS TO Continuous
0,50 MPa
TEST” knob flow
EMERGENCY Continuous
0,50 MPa
knob flow

IN-LINE FLOW INDICATOR (When applicable) (Refer to SUBTASK 35-13-63-710-009-A01)

Indicator
turns from
“100 %” 0,52 MPa 10 L/min red or
black to
transparent

OXYGEN REGULATOR PERFORMANCE

Testing table attached

Table 1017 / TESTING TABLE

Control Test Bench PNR: Tested by : Stamp :

SER: Date of test :

Page 1048
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TASK 35-13-63-700-816-A01
16. TESTING TABLE 1018

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

MASK REGULATOR OVERALL LEAKAGE (Refer to SUBTASK 35-13-63-790-001-A01)

”N” 0,59 MPa < 0,01 L/min

”100%” 0,59 MPa < 0,01 L/min

MASK REGULATOR INWARD LEAKAGE (Refer to SUBTASK 35-13-63-790-002-A01)

< 0,150
“100 %” PLUGGED 1 kPa
L/min

GOGGLES VENTING VALVE FLOW TEST (Refer to SUBTASK 35-13-63-790-003-A01)

Light flow
“100 %” PLUGGED 0,25 kPa
noticeable

HARNESS INFLATION TIME AND COMFORT FUNCTIONS (Refer to SUBTASK 35-13-63-790-004-A01) and (Refer to
SUBTASK 35-13-63-790-005-A01)

TOGGLE ROLLER

Standard Full inflation

0,42 MPa
harness ≤ 1s

Full inflation
Comfort harness 0,50 MPa NORM MAX
≤ 1s
(When
applicable) Full deflation
0,50 MPa NORM MAX
≤ 2s
Residual
0,50 MPa COMF MIN
pressure

No
All type of
noticeable
harness
flow

MICROPHONE AND LEADS CHECK (Refer to SUBTASK 35-13-63-720-006-A01)

Good
Good operation
operation

NOISE CANCELLATION FUNCTION (when applicable) (Refer to SUBTASK 35-13-63-720-007-A01)

Manual switch on “NORMAL” position

Audio circuit
“100 %” 0,55 MPa 6 L/min does nt
operate

Manual switch on “OVERRIDE” position

Audio circuit
“100 %” 0,55 MPa 0 L/min
operate

Page 1049
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

MASK REGULATOR LOCK (Refer to SUBTASK 35-13-63-710-007-A01)

Position and
Position and tightening (refer to table 8001)
tightening

PRESS TO TEST / EMERGENCY KNOB (Refer to SUBTASK 35-13-63-710-008-A01)

“PRESS TO Continuous
0,42 MPa
TEST” knob flow
EMERGENCY Continuous
0,42 MPa
knob flow

IN-LINE FLOW INDICATOR (When applicable) (Refer to SUBTASK 35-13-63-710-009-A01)

Indicator
turns from
“100 %” 0,55 MPa 10 L/min red or
black to
transparent

OXYGEN REGULATOR PERFORMANCE

Testing table attached

Table 1018 / TESTING TABLE

Control Test Bench PNR: Tested by : Stamp :

SER: Date of test :

Page 1050
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TASK 35-13-63-700-817-A01
17. TESTING TABLE 1019

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

MASK REGULATOR OVERALL LEAKAGE (Refer to SUBTASK 35-13-63-790-001-A01)

”N” 0,65 MPa < 0,01 L/min

”100%” 0,65 MPa < 0,01 L/min

MASK REGULATOR INWARD LEAKAGE (Refer to SUBTASK 35-13-63-790-002-A01)

< 0,150
“100 %” PLUGGED 1 kPa
L/min

GOGGLES VENTING VALVE FLOW TEST (Refer to SUBTASK 35-13-63-790-003-A01)

Light flow
“100 %” PLUGGED 0,25 kPa
noticeable

HARNESS INFLATION TIME AND COMFORT FUNCTIONS (Refer to SUBTASK 35-13-63-790-004-A01)and (Refer to
SUBTASK 35-13-63-790-005-A01)

Full inflation
0,50 MPa
≤ 1s
Full deflation
0,50 MPa
≤ 2s

Comfort knob to Slow

0,50 MPa
inflation position inflation
Stays in
Comfort knob
0,50 MPa “COMFORT”
released
position
Residual
After 5 minutes 0,50 MPa
pressure
Comfort knob to Slow
0,50 MPa
deflation position deflation
Stays in
Comfort knob
0,50 MPa “COMFORT”
released
position
Comfort
knob to
Harness inflation “NORMAL”
0,50 MPa position
plate depressed
Full inflation
≤ 1s

MICROPHONE AND LEADS CHECK (Refer to SUBTASK 35-13-63-720-006-A01)

Good
Good operation
operation

Page 1051
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

MASK REGULATOR LOCK (Refer to SUBTASK 35-13-63-710-007-A01)

Position and
Position and tightening (refer to table 8001)
tightening

PRESS TO TEST / EMERGENCY KNOB (Refer to SUBTASK 35-13-63-710-008-A01)

“PRESS TO Continuous
0,45 MPa
TEST” knob flow
EMERGENCY Continuous
0,45 MPa
knob flow

OXYGEN REGULATOR PERFORMANCE

Testing table attached

Table 1019 / TESTING TABLE

Control Test Bench PNR: Tested by : Stamp :

SER: Date of test :

Page 1052
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TASK 35-13-63-700-818-A01
18. TESTING TABLE 1020

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

MASK REGULATOR OVERALL LEAKAGE (Refer to SUBTASK 35-13-63-790-001-A01)

”N” 0,55 MPa < 0,01 L/min

”100%” 0,55 MPa < 0,01 L/min

MASK REGULATOR INWARD LEAKAGE (Refer to SUBTASK 35-13-63-790-002-A01)

< 0,150
“100 %” PLUGGED 1 kPa
L/min

GOGGLES VENTING VALVE FLOW TEST (Refer to SUBTASK 35-13-63-790-003-A01)

Light flow
“100 %” PLUGGED 0,25 kPa
noticeable

HARNESS INFLATION TIME AND COMFORT FUNCTIONS (Refer to SUBTASK 35-13-63-790-004-A01)and (Refer to
SUBTASK 35-13-63-790-005-A01)

Full inflation
0,42 MPa
≤ 1s
Full deflation
0,42 MPa
≤ 2s

Comfort knob to Slow

0,45 MPa
inflation position inflation
Stays in
Comfort knob
0,45 MPa “COMFORT”
released
position
Residual
After 5 minutes 0,45 MPa
pressure
Comfort knob to Slow
0,45 MPa
deflation position deflation
Stays in
Comfort knob
0,45 MPa “COMFORT”
released
position
Comfort
knob to
Harness inflation “NORMAL”
0,45 MPa position
plate depressed
Full inflation
≤ 1s

MICROPHONE AND LEADS CHECK (Refer to SUBTASK 35-13-63-720-006-A01)

Good
Good operation
operation

Page 1053
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

PNR: SER: Amdt: Manufacturing date:

POSITION TEST CONDITIONS

DILUTION INLET MASK DEMAND Toleran-

SUCTION Results
CONTROL PRESSURE PRESSURE FLOW ces

MASK REGULATOR LOCK (Refer to SUBTASK 35-13-63-710-007-A01)

Position and
Position and tightening (refer to table 8001)
tightening

PRESS TO TEST / EMERGENCY KNOB (Refer to SUBTASK 35-13-63-710-008-A01)

“PRESS TO Continuous
0,50 MPa
TEST” knob flow
EMERGENCY Continuous
0,50 MPa
knob flow

IN-LINE FLOW INDICATOR (Refer to SUBTASK 35-13-63-710-009-A01)

Indicator
turns from
“100 %” 0,48 MPa 10 L/min red or
black to
transparent

OXYGEN REGULATOR PERFORMANCE

Testing table attached

Table 1020 / TESTING TABLE

Control Test Bench PNR: Tested by : Stamp :

SER: Date of test :

Page 1054
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TASK 35-13-63-810-801-A01
19. FAULT ISOLATION

A. General
(1) For the replacement of components, refer to the related CMM for DISASSEMBLY
and ASSEMBLY

SUBTASK 35-13-63-810-001-A01
B. Fault Isolation

FAULT PROBABLE CAUSE CORRECTION

Defective Mask regulator Supply Hose punctured Replace the hose, the O-ring and
operation the locking block
Leak at the hose/regulator Replace the O-ring and the locking
connection block
Leak at the harness inflation control Replace the O-rings or the piston.
(Refer to CMM 35-13-70 or CMM
35-13-74)
Inlet filter clogged Replace the main casing. (Refer to
CMM 35-13-70 or CMM 35-13-74)
Pilot valve clogged Replace the main casing. (Refer to
CMM 35-13-70 or CMM 35-13-74)
Mask-Regulator inward Leak at the regulator/mask Replace the O-ring or the mask
leakage out of tolerances connection
Defective mask face seal Replace the mask
Regulator incorrectly connected to Connect the regulator to the mask
mask correctly
Defective regulator seal Replace the seal
Leak between the mask and the Replace the mask
face piece
Leak between the stiffener and the Replace the stiffener or the mask
face piece
Defective window vent valve Replace the vent valve. (Refer to
CMM 35-13-71)

Page 1055
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

FAULT PROBABLE CAUSE CORRECTION

Defective microphone Defective radio cord connections Connect the radio cord correctly.
(Refer to CMM 35-13-72)
Defective connector Replace the radio cord. (Refer to
CMM 35-13-72)
Defective radio cord Replace the radio cord. (Refer to
CMM 35-13-72)
Defective intermediate radio cord Replace the intermediate radio
cord. (Refer to CMM 35-13-70 or
CMM 35-13-74)
Defective microphone capsule Replace the microphone capsule
“IN-LINE” flow indicator Defective “IN-LINE” flow indicator Replace the hose
test out of tolerances
(when applicable)
Defective microphone Defective radio cord connections Connect the radio cord correctly.
(Refer to CMM 35-13-72)
Defective connector Replace the radio cord. (Refer to
CMM 35-13-72)
Defective radio cord Replace the radio cord. (Refer to
CMM 35-13-72)
Defective intermediate radio cord Replace the intermediate radio
cord. (Refer to CMM 35-13-70 or
CMM 35-13-74)
Defective microphone capsule Replace the microphone capsule
Defective harness inflation Leak in the harness Replace the harness
Defective inflation control Replace the “O” Rings or the piston
(Refer to CMM 35-13-70 or CMM
35-13-74)
Leak at the harness / regulator Replace the harness
connection
Harness tube punctured Replace the harness

Page 1056
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TEST OF THE MASK REGULATOR OVERALL LEAKAGE

Figure 1001/GRAPHIC-35-13-63-991-101-A01

Page 1057
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TEST OF THE MASK REGULATOR INWARD LEAKAGE

Figure 1002/GRAPHIC-35-13-63-991-102-A01

Page 1058
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

GOGGLES VENT VALVE FLOW TEST

Figure 1003/GRAPHIC-35-13-63-991-103-A01

Page 1059
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

SCHEMATIC TEST FIXTURE

Figure 1004/GRAPHIC-35-13-63-991-104-A01

Page 1060
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TEST OF “PRESS TO TEST” AND “EMERGENCY”

Figure 1005/GRAPHIC-35-13-63-991-105-A01

Page 1061
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TEST OF THE IN-LINE FLOW INDICATOR (Sheet 1 of 2)

Figure 1006/GRAPHIC-35-13-63-991-106-A01

Page 1062
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TEST OF THE IN-LINE FLOW INDICATOR (Sheet 2 of 2)

Figure 1006/GRAPHIC-35-13-63-991-106-A01

Page 1063
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

THIS PAGE INTENTIONALLY LEFT BLANK

Page 1064
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

SCHEMATICS AND WIRING DIAGRAMS

TASK 35-13-63-878-801-A01
1. Wiring diagrams
A. Radio cord Wiring diagram
(1) Wiring code is given in table 3 (Refer to Table 3).

Page 2001
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

RADIO CORD WIRING

Figure 2001/GRAPHIC-35-13-63-991-201-A01

Page 2002
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

DISASSEMBLY

TASK 35-13-63-000-801-A01
1. GENERAL

A. Generality

WARNING : STRICTLY OBEY THE PROCEDURES FOR THE USE OF OXYGEN

EQUIPMENT. DO NOT USE OIL, GREASE OR OTHER LUBRICANTS
MADE FROM PETROL IN THE AREA OF OXYGEN EQUIPMENT. THIS
CAN CAUSE A DANGEROUS FIRE HAZARD.

CAUTION : DISASSEMBLE IN A CLEAN WORKSHOP, WITH A GOOD PROTEC-

TION FROM DUST. KEEP THE WORKBENCH, THE TOOLS AND THE
PARTS CLEAN. USE ONLY THE RECOMMENDED TOOLS AND THE
RECOMMENDED PRODUCTS WHEN YOU DISASSEMBLE. GIVE A
PROTECTION TO THE PARTS AS SOON AS YOU REMOVE THEM
FROM THE EQUIPMENT.

NOTE : Refer to TESTING AND FAULT ISOLATION to find the necessary level of dis-
assembly. This will give the condition of the equipment and the most possible
cause of the malfunction.
NOTE : Before you disassemble the equipment, use the Illustrated Parts List (figures
1 to 5) to find the part number. Refer to the "Effect Code" column (on the Illus-
trated Parts List) for the parts applicable to the part number of the equipment
that you disassemble. Ignore the instructions about the parts that are not con-
tained in the equipment which you disassemble.
NOTE : All items number shown in parenthesis ( ) are the same item numbers as used
in the illustrated part list.
NOTE : Replace all the gaskets and all the O-rings on an usual overhaul. Also replace
the attachment parts safetied with locking product.
(1) Reason for the Job
(a) Disassembly gives step-by-step instructions for a complete disassembly of
a component in a logical sequence and to access any faulty sub-assembly
and parts.

B. Job Set-Up Information

(1) Tools, Fixtures and Equipment
(a) Table 3001 gives the tools, fixtures and equipment necessary to do the
maintenance of the component.

Page 3001
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

NOTE : You can use alternatives for the listed items.

NOTE : Refer to SPECIAL TOOLS, FIXTURES, EQUIPMENT AND CON-
SUMABLES for full details.

PNR QTY NAME SOURCE

No Specific 1 Mechanical standard tool kit Local supply

Table 3001 / DISASSEMBLY - TOOLS

Page 3002
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TASK 35-13-63-000-802-A01
2. DISASSEMBLY OF THE CREW OXYGEN MASK REGULATOR

SUBTASK 35-13-63-020-001-A01
A. Removal of the Inflatable Harness
(Refer to IPL FIG. 1), (Refer to IPL FIG. 1A), (Refer to IPL FIG. 1B), (Refer to IPL FIG.
1C), (Refer to IPL FIG. 1D), (Refer to IPL FIG. 1E), (Refer to IPL FIG. 1F), (Refer to IPL
FIG. 1G), (Refer to IPL FIG. 1H), (Refer to IPL FIG. 1J), (Refer to IPL FIG. 1K)
(1) If necessary, remove the clip (25).
(2) Remove the screw (20).
(3) Lift the locking tab of the coupling block which is in front of the regulator by 1 to
2 mm (0.04 to 0.08 in).
(4) Hold the locking tab lifted and move the coupling block apart from the regulator.
NOTE : Do not pull the harness tubes

SUBTASK 35-13-63-020-002-A01
B. Removal of the Mask assembly
(Refer to IPL FIG. 1), (Refer to IPL FIG. 1A), (Refer to IPL FIG. 1B), (Refer to IPL FIG.
1C), (Refer to IPL FIG. 1D), (Refer to IPL FIG. 1E), (Refer to IPL FIG. 1F), (Refer to IPL
FIG. 1G), (Refer to IPL FIG. 1H), (Refer to IPL FIG. 1J), (Refer to IPL FIG. 1K)
(1) POST SB MC/F10-35-126
(a) Put the mask regulator in operating position (Refer to Figure 1).

CAUTION : MAKE SURE THAT SOME LOCKING VARNISH PARTICLES CAN-

NOT FALL ON THE COMBINED DIAPHRAGM.

(b) Remove the locking varnish (Refer to Figure 7003).

(c) PRE SB MA/B/C/F10-35-89
1 Loosen the screw (-80).
2 Pull the mask lock (70) out, remove and keep it.
(d) POST SB MA/B/C/F10-35-89
1 Loosen the screw part of the mask lock assembly (70A).
2 Pull the mask lock assembly (70A) out, remove and keep it.
(2) PRE SB MC/F10-35-126
(a) Do the steps (1)(c) or (1)(d) of this subtask.
(3) Move the mask assembly (30) apart from the regulator assembly (60).
(4) PRE SB MC/F10-35-126

Page 3003
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

(a) No specific operation.

(5) POST SB MC/F10-35-126
(a) With dry air blow all sign of locking varnish particles.
(6) If necessary, disassemble the mask assembly (30) (Refer to CMM 35-13-71).

SUBTASK 35-13-63-020-003-A01
C. Removal of the Microphone assembly
(Refer to IPL FIG. 1), (Refer to IPL FIG. 1A), (Refer to IPL FIG. 1B), (Refer to IPL FIG.
1C), (Refer to IPL FIG. 1D), (Refer to IPL FIG. 1E), (Refer to IPL FIG. 1F), (Refer to IPL
FIG. 1G), (Refer to IPL FIG. 1H), (Refer to IPL FIG. 1J), (Refer to IPL FIG. 1K)
(1) Remove the mask (Refer to SUBTASK 35-13-63-220-002-A01).
(2) Pull the microphone assembly (50) to disengage it from the regulator assembly (60).
NOTE : Do not pull on the radio wires attached to the regulator assembly.
(3) Turn the protector of the microphone assembly over.
(4) Remove the screws that attach the intermediate radio cord (110) to the microphone
capsule part of the microphone assembly.
(5) If necessary, Disassemble the microphone assembly (50) (Refer to CMM 35-13-71).

SUBTASK 35-13-63-020-004-A01
D. Removal of the Supply Hose assembly
(Refer to IPL FIG. 1), (Refer to IPL FIG. 1A), (Refer to IPL FIG. 1B), (Refer to IPL FIG.
1C), (Refer to IPL FIG. 1D), (Refer to IPL FIG. 1E), (Refer to IPL FIG. 1F), (Refer to IPL
FIG. 1G), (Refer to IPL FIG. 1H), (Refer to IPL FIG. 1J), (Refer to IPL FIG. 1K)
(1) Remove the attachment screw (100) and remove the regulator coverplate assembly
(90).
(2) Remove the screws (120 and 130) and the nut (180) to disconnect the radio cord
part of the supply hose assembly.
(3) Cut the end of the pins of the locking block (170). Remove and discard the locking
block.
(4) Move the supply hose assembly (160) apart from the regulator assembly (60).
(5) If necessary, disassemble the supply hose assembly (160) (Refer to CMM
35-13-72).

Page 3004
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

SUBTASK 35-13-63-020-005-A01
E. Removal of the regulator assembly
(Refer to IPL FIG. 1), (Refer to IPL FIG. 1A), (Refer to IPL FIG. 1B), (Refer to IPL FIG.
1C), (Refer to IPL FIG. 1D), (Refer to IPL FIG. 1E), (Refer to IPL FIG. 1F), (Refer to IPL
FIG. 1G), (Refer to IPL FIG. 1H), (Refer to IPL FIG. 1J), (Refer to IPL FIG. 1K)
(1) Remove the inflated harness assembly (10) (Refer to SUBTASK 35-13-63-020-001-A01).
(2) Remove the mask assembly (30) (Refer to SUBTASK 35-13-63-020-002-A01).
(3) Remove the microphone assembly (50) (Refer to SUBTASK 35-13-63-020-003-A01).
(4) Remove the supply hose assembly (160) (Refer to SUBTASK 35-13-63-220-004-A01).
(5) If necessary, disassemble the regulator assembly (60) (Refer to CMM 35-13-70 or
CMM 35-13-74).

Page 3005
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

THIS PAGE INTENTIONALLY LEFT BLANK

Page 3006
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

CLEANING

TASK 35-13-63-100-801-A01
1. GENERAL

A. Job Set-Up Information

WARNING : STRICTLY OBEY THE PROCEDURES WHEN YOU DO WORK ON THE

OXYGEN SYSTEM. DO NOT USE OIL, GREASE OR OTHER LUBRI-
CANTS MADE FROM PETROL IN THE AREA OF OXYGEN SYSTEM.
YOU CAN CAUSE A FIRE OR EXPLOSION.

CAUTION : DO THE CLEANING WITH CLEAN HANDS. MOVE THE PARTS VERY
CAREFULLY. CLEAN THE TOOLS CAREFULLY.

(1) Reason for the job

(a) This section gives the procedure for cleaning the unit externally and internally.
Do all the work with clean workbench, tools and parts. After cleaning, put all
items in sealed containers to prevent contamination by dust or unwanted
materials.

B. Tools, Fixtures and Equipment

(1) Materials
(a) Table 4001 gives the material necessary to do the maintenance of the
component.
NOTE : You can use alternatives for the listed items.
NOTE : Refer to SPECIAL TOOLS, FIXTURES, EQUIPMENT AND CON-
SUMABLES for full details.

MATERIAL DESCRIPTION SOURCE

Detergent MIL-D-16791 Non-ionic detergent Type 1 Local supply
or M36 FIMM
or ASSERT LEMON VF6269
or soap DOT111/113 DELTA OMEGA
TECHNOLOGIES LTD
Lint free cloth No specific Local supply
Soft bristle brush No specific Local supply
Disinfectant SAN50 VF5341

Table 4001 / CLEANING MATERIALS

Page 4001
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

(2) Tools
(a) Use a source of dry, clean, without oil, compressed air to do the cleaning of
the quick donning mask regulator assembly.
NOTE : Equivalent substitutes can be used for listed items.

SUBTASK 35-13-63-100-001-A01
C. Preparation of the Detergent Solution
(1) Prepare the following mixture: 3 cl/liter of detergent M36 or 8 ml/10 liters to 12ml/10
liters of detergent ASSERT LEMON and hot water.

Page 4002
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TASK 35-13-63-100-802-A01
2. CLEANING OF THE CREW OXYGEN MASK REGULATOR

SUBTASK 35-13-63-140-002-A01
A. Cleaning of the Mask

CAUTION : DO NOT LET THE DETERGENT SOLUTION, THE DISINFECTANT

PRODUCTS OR WATER GO ON THE WINDOW SURFACES.

CAUTION : IMPORTANT : NEVER CLEAN THE VISOR WHEN THERE IS MOISTURE

OR WATER ON THE SURFACES. THAT CAN DAMAGE THE ANTI-MIST
COAT.

(1) Removed parts

(a) Clean all the areas of the mask face piece and of the nose cup assembly.
Use a gauze pad, or a lint-free cloth, moistened with the detergent solution.
(b) Remove the detergent solution with a gauze pad, or a lint-free cloth,
moistened with pure water.
(c) Let dry fully in the air or blow dry, clean, without oil air.
(d) Apply an antiseptic (SAN50) on the internal surfaces of the mask face piece.
(2) New parts from stock
(a) Apply an antiseptic (SAN50) on the internal surfaces of the mask face piece.

SUBTASK 35-13-63-140-003-A01
B. Cleaning of the others sub-assembly
(1) Cleaning of the microphone (Refer to CMM 35-13-71).
(2) Cleaning of the regulator (Refer to CMM 35-13-70 or CMM 35-13-74).
(3) Cleaning of the inflatable harness assembly (Refer to CMM 35-13-71)
(a) Not applicable (for information)
(4) Cleaning of the supply hose assembly (Refer to CMM 35-13-72)
(a) Not applicable (for information)

Page 4003
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

THIS PAGE INTENTIONALLY LEFT BLANK

Page 4004
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

CHECK/INSPECTION

TASK 35-13-63-200-801-A01
1. GENERAL

A. Job Set-Up Information

WARNING : STRICTLY OBEY THE PROCEDURES WHEN YOU DO WORK ON THE

OXYGEN SYSTEM. DO NOT USE OIL, GREASE OR OTHER LUBRI-
CANTS MADE FROM PETROL IN THE AREA OF OXYGEN SYSTEM.
YOU CAN CAUSE A FIRE OR EXPLOSION.

NOTE : All the parts that show a visual defect or signs of corrosion must be systemat-
ically replaced.
(1) Use a strong light and a magnifying-glass as needed.
(2) Do a visual check on all parts of the assemblies and in particular:
– make sure that the parts are clean and in a satisfactory condition,
– examine the condition of the threads,
– examine the condition of the tubes and of the hoses.

B. Reason for the Job

(1) The visual check that follows is to determine if there is presence of visible damage
or corrosion. It will not determine the functionality of the Crew Oxygen Mask
Regulator. To make sure that the Crew Oxygen Mask Regulator operates correctly,
do all tests in TESTING AND FAULT ISOLATION.

Page 5001
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

THIS PAGE INTENTIONALLY LEFT BLANK

Page 5002
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TASK 35-13-63-200-802-A01
2. CHECK OF THE CREW OXYGEN MASK REGULATOR

SUBTASK 35-13-63-220-001-A01
A. Visual Check of the Inflatable Harness Assembly MXH Series
(1) Refer to CMM 35-13-71 for the visual check of the inflatable harness assembly.

SUBTASK 35-13-63-220-002-A01
B. Visual Check of the Mask Assembly MXM Series
(1) Refer to CMM 35-13-71 for the visual check of the mask assembly.

SUBTASK 35-13-63-220-003-A01
C. Visual Check of the Microphone Assembly MXA Series
(1) Refer to CMM 35-13-71 for the visual check of the microphone assembly.

SUBTASK 35-13-63-220-004-A01
D. Visual Check of the Regulator Assembly
(1) Refer to CMM 35-13-70 or CMM 35-13-74 for the visual check of the regulator
assembly.

SUBTASK 35-13-63-220-005-A01
E. Visual Check of the Supply Hose Assembly
(1) Refer to CMM 35-13-72 for the visual check of the supply hose assembly.

Page 5003
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

THIS PAGE INTENTIONALLY LEFT BLANK

Page 5004
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TASK 35-13-63-200-803-A01
3. MAINTENANCE RECOMMENDATION

A. Maintenance data
T.B.O. (Time Between Overhaul) . . . . . . . . . . Refer to SIL 18
T.B.S.V. (Time Between Service Visit) . . . . . . Refer to SIL 18
Functional test of Harness MXH Series . . . . . . Refer to SIL 18
Storage Life limit . . . . . . . . . . . . . . . . . . . . . . . . Refer to SIL 18

B. Functional test
(1) ZODIAC AEROTECHNICS recommends that a complete functional test be
performed at minimum of once a year as described in the Aircraft Flight or
Maintenance Instructions as supplemented by 4NUT0045A.

C. Replacement of sub-assemblies.
(1) ZODIAC AEROTECHNICS recommends strongly the replacement of sub
assemblies as follows:
Supply hose DTS4xxx Series,
DTS4xxxG Series . . . . . . . . . . . . . . . . . . . . every 144 months
Harness MXH Series . . . . . . . . . . . . . . . . . every 72 months
NOTE : The above periodicities are based on ZODIAC AEROTECHNICS know-
how and repair analysis as it is quite difficult for repair technicians to
determine the serviceability of the subassembly in relation with ageing
conditions which are not only visual. Those parts have been endurance
tested through cycles, which showed evidence of these limits based on
intensive use of the product. The deterioration of harness braid, supply
hose braid, silicone tube used on these sub-assemblies, silicon seal tear
and wear on the mask are potential causes of inappropriate pilot protec-
tion during emergency conditions.

Page 5005
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

THIS PAGE INTENTIONALLY LEFT BLANK

Page 5006
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TASK 35-13-63-200-804-A01
4. INSPECTION
A. Procedure
(1) Remove the inflatable harness (Refer to SUBTASK 35-13-63-020-001-A01).
(2) Remove the mask assembly (Refer to SUBTASK 35-13-63-020-002-A01).
(3) Remove the Regulator assembly (Refer to SUBTASK 35-13-63-020-005-A01)
NOTE : Keep the microphone assembly and the hose assembly fitted on the reg-
ulator.
(4) Do the test of the altitude compensated enrichment. (Refer to CMM 35-13-70 or
CMM 35-13-74).
(a) If the test is correct:
– Re-install the regulator, the mask assembly and inflatable harness as
per CMM 35-13-63.
– Identify the inspection.
(b) If the test is not correct:
– Remove the coverplate assembly.
– Adjust the regulator.
– Do the complete tests of the regulator.
– Re-install the regulator, the mask assembly and inflatable harness as
per CMM 35-13-63.
– Do the complete of the Oxygen mask (Refer to TESTING AND FAULT
ISOLATION).
– Identify the inspection .
B. Identification
(1) ON a self adhesive label, write with an indelible ink or print the following text:
“INSPECTED AS PER SB MCF-SBU-35-001”
(2) Install the inspection label on the opposite side of the oxygen mask’ identification
label.

Page 5007
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

THIS PAGE INTENTIONALLY LEFT BLANK

Page 5008
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

REPAIR

TASK 35-13-63-300-801-A01
1. Repair no. 1 - Repair of the Crew Oxygen Mask Regulator

A. General

WARNING : STRICTLY OBEY THE PROCEDURES FOR THE USE OF OXYGEN

EQUIPMENT. DO NOT USE OIL, GREASE OR OTHER LUBRICANTS
MADE FROM PETROL IN THE AREA OF OXYGEN EQUIPMENT. THIS
CAN CAUSE A DANGEROUS FIRE HAZARD.

WARNING : ZODIAC AEROTECHNICS DOES NOT APPROVE THE INSTALLA-

TION OF THE COPY PARTS ON THEIR EQUIPMENTS EVEN IF
THEY POSSESS A PART MANUFACTURER APPROVAL. USING OF
NON-ORIGINAL PARTS CAN AFFECT THE O2 MASK-REGULATOR
PERFORMANCES AND IMPACT TECHNICAL STANDARD ORDER
REQUIREMENTS.

(1) Reason for the Job

(a) During a repair, some parts have to be replaced systematically when they
are removed, and some have to be replaced depending on the conditions
(Refer to SIL 18).

SUBTASK 35-13-63-350-001-A01
B. Repair of the Inflatable Harness Assembly MXH Series
(1) Refer to CMM 35-13-71 for the repair of the inflatable harness assembly.

SUBTASK 35-13-63-350-002-A01
C. Repair of the Mask Assembly MXM Series
(1) Refer to CMM 35-13-71 for the repair of the mask assembly.

SUBTASK 35-13-63-35-003-A01
D. Repair of the Microphone Assembly MXA Series
(1) Refer to CMM 35-13-71 for the repair of the microphone assembly.

SUBTASK 35-13-63-350-004-A01
E. Repair of the Regulator Assembly
(1) Refer to CMM 35-13-70 or CMM 35-13-74 for the repair of the regulator assembly.

Page 6001
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

SUBTASK 35-13-63-350-005-A01
F. Repair of the Supply Hose and Radio Cord Assembly
(1) Refer to CMM 35-13-72 for the repair of the supply hose and radio cord assembly.

SUBTASK 35-13-63-350-006-A01
G. Testing after a repair
(1) After a repair, do a full bench test (Refer to TESTING AND FAULT ISOLATION).
NOTE : The full bench test must be done at 72 months of shelf life of the crew
mask oxygen regulator .

Page 6002
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TASK 35-13-63-300-802-A01
2. Repair no. 2- Replacement or installation of the clip

A. General

WARNING : STRICTLY OBEY THE PROCEDURES FOR THE USE OF OXYGEN

EQUIPMENT. DO NOT USE OIL, GREASE OR OTHER LUBRICANTS
MADE FROM PETROL IN THE AREA OF OXYGEN EQUIPMENT. THIS
CAN CAUSE A DANGEROUS FIRE HAZARD.

(1) Reason for the Job

(a) For compatibility, it is necessary to install two clips PNR 050038 on the
inflatable harness assembly to fit the MXG Series smoke goggles (Refer
to ACMM 35-14-01).

B. Job Set-Up Information

(1) Tools, fixtures and equipment
(a) The table 6001 gives the tools, fixtures and equipment necessary to do the
maintenance of the component.
NOTE : You can use alternatives for the listed items.
NOTE : Refer to SPECIAL TOOLS, FIXTURES, EQUIPMENT AND CON-
SUMABLES for full details.

PNR QTY NAME SOURCE

No Specific 1 Mechanical standard tool kit Local supply

(2) Consumable
(a) The table 6002 gives the Consumable necessary to do the maintenance of
the component.
NOTE : You can use alternatives for the listed items.
NOTE : Refer to SPECIAL TOOLS, FIXTURES, EQUIPMENT AND CON-
SUMABLES for full details.

PNR QTY NAME SOURCE

Identification label
080759 1 VF5341
(Only with MXG series smoke goggles)

Page 6003
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

SUBTASK 35-13-63-350-007-A01
C. Procedure
(Refer to IPL FIG. 1D), (Refer to IPL FIG. 1H).
(1) Removal of the clip

CAUTION : IT IS NOT NECESSARY TO DISASSEMBLE THE HARNESS FROM

THE MASK

(a) Remove the clip (25).

(2) Installation of the clip
(a) Install the lower and upper harness tubes deflated into the clips (25) in the
position as shown on figure 6001.
(b) Make sure that the harness tubes are not twisted.

SUBTASK 35-13-63-350-008-A01
D. Identification (Applicable for the First installation of the clip)
(1) Install the label PNR 080759 on the nameplate (210). The new label white band
shall hide the three (or two) last digits of the area PNR nameplate.
(2) Amend the existing PNR of the Crew Oxygen Mask Regulator according to the new
PNR MC10 - (XY) - (2)(WZ).
For instance: MC10-25-104 becomes MC10-25-204

Page 6004
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

REPLACEMENT OR INSTALLATION OF THE CLIP

Figure 6001/GRAPHIC-35-13-63-991-601-A01

Page 6005
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

THIS PAGE INTENTIONALLY LEFT BLANK

Page 6006
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

ASSEMBLY

TASK 35-13-63-400-801-A01
1. GENERAL

A. General

WARNING : STRICTLY OBEY THE PROCEDURES WHEN YOU DO WORK ON OXY-

GEN SYSTEM. DO NOT USE OIL, GREASE OR OTHER LUBRICANTS
MADE FROM PETROL IN THE AREA OF OXYGEN EQUIPMENT. YOU
CAN CAUSE A FIRE OR EXPLOSION.

CAUTION : ASSEMBLE IN A CLEAN WORKSHOP, WITH A GOOD PROTECTION

FROM DUST. KEEP CLEAN THE WORK BENCH, THE TOOLS AND THE
PARTS. USE ONLY THE RECOMMENDED TOOLS AND THE RECOM-
MENDED PRODUCTS.

NOTE : Make sure that cleaning, check and repair of parts have been done before you
assemble.
NOTE : All items number shown in parenthesis ( ) are the same item numbers as used
in the illustrated part list.
NOTE : After assembly, do an operation test as specified in section TESTING AND
FAULT ISOLATION.
(1) Reason for the job
(a) Assembly gives step-by step instructions for a complete assembly of the
component in a logical sequence.

B. Job Set-Up Information

(1) Tools, fixtures and equipment
(a) Table 7001 gives the tools, fixtures and equipment necessary to do the
maintenance of the component.
NOTE : You can use alternatives for the listed items.
NOTE : Refer to SPECIAL TOOLS, FIXTURES, EQUIPMENT AND CON-
SUMABLES for full details.

MATERIAL QTY DESCRIPTION SOURCE

No specific 1 Mechanic standard tool kit Local supply
No specific 1 Torque wrench Local supply

Page 7001
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

MATERIAL QTY DESCRIPTION SOURCE

098722 1 Specific screwdriver VF5341
410-131KX2 1 Three-pronged sleeve expander VF0331

Table 7001 / ASSEMBLY - TOOLS

(2) Consumables
(a) Table 7002 gives the consumables necessary to do the maintenance of the
component.
NOTE : You can use alternatives for the listed items.
NOTE : Refer to SPECIAL TOOLS, FIXTURES, EQUIPMENT AND CON-
SUMABLES for full details.

MATERIAL DESCRIPTION SOURCE

Locking varnish BLR15D VK2337
VFAFY5

Table 7002 / ASSEMBLY - CONSUMABLE

Page 7002
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TASK 35-13-63-400-802-A01
2. ASSEMBLY OF THE CREW OXYGEN MASK REGULATOR

SUBTASK 35-13-63-420-001-A01
A. Installation of the regulator assembly
(Refer to IPL FIG. 1), (Refer to IPL FIG. 1A), (Refer to IPL FIG. 1B), (Refer to IPL FIG.
1C), (Refer to IPL FIG. 1D), (Refer to IPL FIG. 1E), (Refer to IPL FIG. 1F), (Refer to IPL
FIG. 1G), (Refer to IPL FIG. 1H), (Refer to IPL FIG. 1J), (Refer to IPL FIG. 1K)
(1) If necessary, assemble the regulator assembly (60) (Refer to CMM 35-13-70 or
CMM 35-13-74).
(2) Install the supply hose assembly (160) (Refer to SUBTASK 35-13-63-420-002-A01).
(3) Install the microphone assembly (50) (Refer to SUBTASK 35-13-63-420-003-A01).
(4) Install the mask assembly (30) (Refer to SUBTASK 35-13-63-420-004-A01).
(5) Install the inflatable harness assembly (10) (Refer to SUBTASK
35-13-63-420-005-A01) .

SUBTASK 35-13-63-420-002-A01
B. Installation of the Supply Hose Assembly
(Refer to IPL FIG. 1), (Refer to IPL FIG. 1A), (Refer to IPL FIG. 1B), (Refer to IPL FIG.
1C), (Refer to IPL FIG. 1D), (Refer to IPL FIG. 1E), (Refer to IPL FIG. 1F), (Refer to IPL
FIG. 1G), (Refer to IPL FIG. 1H), (Refer to IPL FIG. 1J), (Refer to IPL FIG. 1K)
(1) Make sure that the seal (190) is properly in place (Refer to CMM 35-13-72 Subtask
35-13-72-430-002-A01 for installation).
(2) Install the coupling of the supply hose assembly (160) into the oxygen inlet of
the regulator assembly (60).
(3) Install the pins of the locking block (170) into their housing. Make sure that the lug
of locking block engages into the regulator recess.

CAUTION : BE CAREFUL, MAKE SURE NOT TO DAMAGE THE CONTROL PLATES

OR THE SLEEVE OF THE HOSE.

(4) Rivet the pins of the locking block (170) with a soldering iron.
(5) Connect the radio cord, part of the supply hose assembly, to the intermediate
radio cord (110) with the screws (120 and 130), as shown in the diagram. (Refer
to Fig. 2001)
(6) Install the radio cord collar in the correct position (Refer to Fig. 7002) .
(7) Attach the radio cord, part of the supply hose assembly, to the regulator assembly
with the screw (140) and the nut (180), tighten the nut with the specific screwdriver
(5, figure 9001).

Page 7003
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

(8) Install the coverplate (90) and attach it with the screw (100). Torque the screw
(100) at the value given in table 8001.

SUBTASK 35-13-63-420-003-A01
C. Installation of the Microphone Assembly
(Refer to IPL FIG. 1), (Refer to IPL FIG. 1A), (Refer to IPL FIG. 1B), (Refer to IPL FIG.
1C), (Refer to IPL FIG. 1D), (Refer to IPL FIG. 1E), (Refer to IPL FIG. 1F), (Refer to IPL
FIG. 1G), (Refer to IPL FIG. 1H), (Refer to IPL FIG. 1J), (Refer to IPL FIG. 1K)
(Refer to IPL of CMM 35-13-63, 35-13-71, 35-13-70 or 35-13-74)
(1) If necessary, cut the ground braid of the intermediate radio cord (110), on the
microphone capsule side.
(2) Install the sleeve (-115) on the intermediate radio cord (capsule side). Use a
three-pronged expander.
NOTE : The Sleeve shall cover either le ground braid (if not cut and connected
to the mas pin of the micro) or cover the ground braid (if cut). this is to
avoid ground braid to come in contact with the other wire terminals
(3) Put the terminal lugs of the intermediate radio cord (110) in succession through the
hole of the protector (10, IPL figure 10 CMM 35-13-71).
(4) If applicable, install the spacer (30, IPL Figure 10 CMM 35-13-71).
(5) Move the protector (10, IPL Figure 10 CMM 35-13-71) back and attach the radio
wires as shown in the diagram in the figure 7001. Then engage the capsule (20,
IPL Figure 10 CMM 35-13-71) in the protector (10, IPL Figure 10 CMM 35-13-71).
(6) Install the protector (10, IPL Figure 10 CMM 35-13-71) with the capsule (20, IPL
Figure 10 CMM 35-13-71) on the dilution nozzle (510, IPL Figures 2 thru 7 CMM
35-13-70 or CMM 35-13-74).

SUBTASK 35-13-63-420-004-A01
D. Installation of the Mask Assembly
(Refer to IPL FIG. 1), (Refer to IPL FIG. 1A), (Refer to IPL FIG. 1B), (Refer to IPL FIG.
1C), (Refer to IPL FIG. 1D), (Refer to IPL FIG. 1E), (Refer to IPL FIG. 1F), (Refer to IPL
FIG. 1G), (Refer to IPL FIG. 1H), (Refer to IPL FIG. 1J), (Refer to IPL FIG. 1K)
(1) Put the mask assembly (30) on the regulator assembly (60) and apply a pressure
until it comes to its position (you will hear a click).
(2) PRE SB MA/B/C/F10-35-89
(a) Move the mask lock (70) into the housing on the protector part of the
microphone assembly (50).
(b) Install the screw (-80).
(c) Make sure that the mask lock assembly (70) is well set into the recess of
the mask assembly.

Page 7004
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

(d) Push the mask lock (70) and torque the screw (-80) at the value given in
table 8001.
(3) POST SB MA/B/C/F10-35-89
(a) Install the mask lock assembly (70A) into the housing of the protector part of
the microphone assembly (50).
(b) Make sure that the mask lock assembly (70A) is well set into the recess of
the mask assembly.
(c) Torque the screw of the mask lock assembly (70A) at the value given in
table 8001.

CAUTION : MAKE SURE THAT THE DROP OF LOCKING VARNISH CANNOT FALL
ON THE COMBINED DIAPHRAGM.

(4) Apply a drop of locking varnish on the screw and the mask lock (Refer to figure
7003 for different configurations).

SUBTASK 35-13-63-420-005-A01
E. Installation of the Inflatable Harness Assembly
(Refer to IPL FIG. 1), (Refer to IPL FIG. 1A), (Refer to IPL FIG. 1B), (Refer to IPL FIG.
1C), (Refer to IPL FIG. 1D), (Refer to IPL FIG. 1E), (Refer to IPL FIG. 1F), (Refer to IPL
FIG. 1G), (Refer to IPL FIG. 1H), (Refer to IPL FIG. 1J), (Refer to IPL FIG. 1K)

CAUTION : MAKE SURE THAT THE SEAL (150) IS PROPERLY IN PLACE.

(1) Install the harness (10) on the regulator body and attach it with the screw (20).
(2) Torque the harness attachment screw (20) at the value given in table 8001.

SUBTASK 35-13-63-420-006-A01
F. Installation of the TSO Label
(Refer to IPL FIG. 1), (Refer to IPL FIG. 1A), (Refer to IPL FIG. 1B), (Refer to IPL FIG.
1C), (Refer to IPL FIG. 1D), (Refer to IPL FIG. 1E), (Refer to IPL FIG. 1F), (Refer to IPL
FIG. 1G), (Refer to IPL FIG. 1H), (Refer to IPL FIG. 1J), (Refer to IPL FIG. 1K)
(1) If necessary, remove the label (200).
(2) Write the values with indelible ink, as shown in the blank AREAS “1, 2,3”, and “4”
if applicable, of the new TSO label (Refer to ‘DESCRIPTION AND OPERATION’
table 1 and to figure 7004).
(3) Attach the self-adhesive TSO label (200) on the coverplate (90) of the regulator
assembly (60) (Refer to ‘DESCRIPTION AND OPERATION’ figure 2).

Page 7005
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

SUBTASK 35-13-63-420-007-A01
G. Installation of the Identification Label
NOTE : The manufacturer fills in the identification label for a new equipment only. In
the other cases (repair or overhaul) the repairer must fill in the identification
label.
(Refer to IPL FIG. 1), (Refer to IPL FIG. 1A), (Refer to IPL FIG. 1B), (Refer to IPL FIG.
1C), (Refer to IPL FIG. 1D), (Refer to IPL FIG. 1E), (Refer to IPL FIG. 1F), (Refer to IPL
FIG. 1G), (Refer to IPL FIG. 1H), (Refer to IPL FIG. 1J), (Refer to IPL FIG. 1K)
(1) If necessary, remove the label (210).
(2) Write the data, with indelible ink, in the blank area of the new identification label
(Refer to figure 7005):

CAUTION : DATA MUST BE LEGIBLE. USE ONLY GENUINE INDELIBLE INK OR

PROTECT DATA WITH A TRANSPARENT SELF-ADHESIVE TAPE.

– PNR: Part Number of the Crew Oxygen Mask Regulator,

– SER: Serial Number of the Crew Oxygen Mask Regulator,
– CODE: If applicable, code of the aircraft manufacturer,
– AMD: Amendment area,
– DMF: Manufacturing date,
– INSP: Inspection stamp.
NOTE : The repairer must fill in the amendment area as per the previous identi-
fication label and must add the amendments embodied during the repair
or the overhaul (Refer to the relevant Service Bulletin for the amendment
identification).
(3) Attach the self-adhesive Identification label (210) on the main casing of the
regulator assembly (60) (Refer to ‘DESCRIPTION AND OPERATION’, Figure 2
and to IPL, Figure 2 or 3).

Page 7006
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

RADIO CORD CONNECTION DIAGRAM

Figure 7001/GRAPHIC-35-13-63-991-701-A01

Page 7007
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

COLLAR INSTALLATION
Figure 7002/GRAPHIC-35-13-63-991-702-A01

Page 7008
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

VIEW OF THE MASK LOCK

Figure 7003/GRAPHIC-35-13-63-991-703-A01

Page 7009
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TSO LABEL AND IDENTIFICATION LABEL

Figure 7004/GRAPHIC-35-13-63-991-704-A01

Page 7010
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

FITS AND CLEARANCES

TASK 35-13-63-992-801-A01
1. FITS AND CLEARANCES

SUBTASK 35-13-63-992-001-A01
A. Table of Torque Values
(Refer to IPL FIG. 1), (Refer to IPL FIG. 1A), (Refer to IPL FIG. 1B), (Refer to IPL FIG.
1C), (Refer to IPL FIG. 1D), (Refer to IPL FIG. 1E), (Refer to IPL FIG. 1F), (Refer to IPL
FIG. 1G), (Refer to IPL FIG. 1H), (Refer to IPL FIG. 1J), (Refer to IPL FIG. 1K)
(1) Table 8001 gives the torque values necessary to assemble the mask regulator.

IPL FIG.N° TORQUE

AND ITEM NOMENCLATURE
N.m lb.in
1 thru 1K / item 20 SCREW 0,20 ±0,02 1.77 ±0.17
1 thru 1K / item 70A SCREW 1,10 ±0,1 9.74 ±0.88
1 thru 1K / item 80 SCREW 0,60 -0/+0,06 5.31 -0/+0.53
1 thru 1K / item 100 SCREW 0,30 -0/+0,03 2.65 -0/+0.26

Table 8001 / TORQUE VALUES

Page 8001
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

THIS PAGE INTENTIONALLY LEFT BLANK

Page 8002
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

SPECIAL TOOLS, FIXTURE, EQUIPMENT AND CONSUMABLES

TASK 35-13-63-940-801-A01
1. CREW OXYGEN MASK STOWAGE EQUIPMENT - SPECIAL TOOLS, FIXTURE,
EQUIPMENT AND CONSUMABLES

SUBTASK 35-13-63-940-001-A01
A. List of Special Tools
(1) Table 9001 gives the special tools necessary to do the maintenance of the
component.
NOTE : You can use alternatives for the listed items.

SUPPLIER'S PAGE
FIGURE CODE OR BLOCK
PART NUMBER DESIGNATION
/ITEM NAME AND WHERE
ADDRESS USED
- No specific Mechanic standard tool kit Local supply 3001
7001
- No specific Torque wrench Local supply 7001
9001 - 1 407518 Plug DPB 9 VF5341 1001
9001 - 2 480964 Mask support VF5341 1001
9001 - 3 422095 Supply coupling VF5341 1001
9001 - 4 422098-1 Test box VF5341 1001
9001 - 5 098722 Specific screwdriver VF5341 3001
7001
9001 - 6 510272 Adaptor VF5341 1001
- 410-131KX2 Three-pronged sleeve expander VF0331 7001
- 485917 or Microphone test set VF5341 1001
equivalent

Table 9001 / SPECIAL TOOLS

SUBTASK 35-13-63-940-002-A01
B. List of Special Equipment
(1) Table 9002 gives the equipments necessary to do the maintenance of the
component.

Page 9001
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

SUPPLIER'S PAGE
CODE OR BLOCK
DESCRIPTION RANGE ACCURACY
NAME AND WHERE
ADDRESS USED
Flowmeter (F1) 0,006 to 0,06 L/min ± 5% full scale Local supply 1001
Flowmeter (F2) 0,025 to 0,25 L/min ± 4% full scale Local supply 1001
Pressure gauge (G1) 0 to +1 MPa ± 1% full scale Local supply 1001
(0 to 145 psi)
Pressure gauge (G2) -2 to +2 kPa ± 1% full scale Local supply 1001
(-0.29 to 0.29 psi)
Low pressure ON/OFF - - Local supply 1001
valve
(V1)
Bleed valve (V2) - - Local supply 1001
Adjustable pressure 0 to 1 MPa - Local supply 1001
reducer (0 to 145 psi)
(R1)
Oxygen source (S1) - - Local supply 1001
Vacuum source (S2) From 10 to 101,3 kPa - Local supply 1001
(1.45 to 14.68 psi)
Flow 40 m3/h
(177 gal(U.S.)/min)

Table 9002 / SPECIAL EQUIPMENTS

SUBTASK 35-13-63-940-003-A01
C. List of Consumables
(1) Table 9003 gives the consumables necessary to do the maintenance of the
component.
NOTE : You can use equivalent products as an alternative for those given in table
9002. Do not use other oxygen lubricants than those given in the table.

PAGE
SUPPLIER'S CODE OR BLOCK
MATERIAL DESIGNATION
NAME AND ADDRESS WHERE
USED
Oxygen MIL-0-27210 type 1 or Local supply
SAE AS 8010 standards or 1001
Technical Clause CT EQ 630-56
Lint free cloth Open Local supply 4001
Soft bristle brush Open Local supply 4001
Disinfectant SAN50 VF5341 4001

Page 9002
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

PAGE
SUPPLIER'S CODE OR BLOCK
MATERIAL DESIGNATION
NAME AND ADDRESS WHERE
USED
Detergent MIL-D-16791 Local supply
Non-ionic detergent Type 1
or M36 FIMM 1 AVENUE
GARIGLIANO 91600
SAVIGNY SUR ORGE
FRANCE 4001
or ASSERT LEMON VF6269
or soap DOT111/113 DELTA OMEGA
TECHNOLOGIES LTD PO
BOX 81518 LAFAYETTE,
LA70598 USA
Locking varnish BLR15D VK2337
7001
VFAFY5
Polythene bag - Local supply 15001
Cardboard box - Local supply 15001
Cardboard or - Local supply
15001
polystyrene
Adhesive tape - Local supply 15001
Protective coating - Local supply 15001

Table 9003 / CONSUMABLE PRODUCTS

Page 9003
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

TOOLS AND SPECIAL EQUIPMENT

Figure 9001/GRAPHIC-35-13-63-991-901-A01

Page 9004
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

ILLUSTRATED PARTS LIST

IPL Page 10001

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

THIS PAGE INTENTIONALLY LEFT BLANK

IPL Page 10002

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

ILLUSTRATED PARTS LIST

TASK 35-13-63-990-850-A01
1. Introduction

A. General
(1) The purpose of this Illustrated Parts List is the identification of equipment
assemblies, sub-assemblies, and parts.
(2) It is set up in conformance with the rules set forth in ATA 2200, revision 2000-1.
(3) From time to time, the illustrated nomenclature is revised so as to incorporate recent
additions, cancellations and modifications in equipment. Revisions are indicated by
an "R" on the right of each revised line, and apply solely to the date of revision.

B. Use of the IPL

(1) Publication format
(a) The IPL is arranged in the following order :
– Introduction, including the Vendor Code Index (VCI),
– Equipment Designator Index (EDI),
– Numerical Index (NI),
– Detailed Parts List (DPL).
(b) Equipment designator index
This index contains the relevant reference and diagrams for each circuit
symbol, as well as the corresponding marker.
The equipment designator index is alphanumerical, and is arranged in the
following order:
– dash,
– letters from A through Z,
– numerals from 0 through 9.
(c) Numerical index
This index contains all Part Numbers (PN) ever included in the Detailed
Parts. The part number is followed by the applicable figure and item number
/ variant references.
The numerical index is alphanumerical, and is arranged in the following order :
– dash,
– letters from A through Z,
– numerals from 0 through 9.

INTRO Page 10003

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

(d) Vendor Code index

The vendor code index is alphanumerically arranged according to the
manufacturer's code. This list includes the names and addresses of all
manufacturers cited in the detailed nomenclature.
(2) Identification of a component part
There are several different ways to identify a component part.
(a) To find a part with a known Part Number (PN)
1 Refer to the Numerical Index and find the PN.
2 The numerical index contains the following information about the
reference :
– the reference of the part specific to the airline (column left blank),
– the illustrated catalog sequence number (CSN). Application:
2-150A (2 = Figure number, 150A = sequence number).
– the quantity per CSN.
3 Refer to the figure in the parts list.
4 Find the item number on the illustration.
(b) To find a PN with a known Equipment Designator Index.
This index specifies the item reference and the CSN relevant to a given
symbol.
1 A circuit symbol is made up of :
– 1 or 2 letters specifying the nature of the component part (letter
symbol),
– 1 or 2 numerals stating the order code of the component part
in the relevant sub-assembly,
– or possibly with a position suffix, containing 2 or 4 numerals,
and defining the sub-assembly in which the component part is
mounted. This suffix is chosen at random.
Application: R10 - 6,
R = Letter Symbol,
10 = Order No,
6 = Position suffix.
2 List of position suffixes versus the sub-assembly designation.

FIGURE DESIGNATION SUFFIX

1 Refuel panel multi tank indicator (MTI), assembly 10
2 Circuit card display 20
3 Circuit card assembly, CPU 32

INTRO Page 10004

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

3 List of sub-assemblies versus the position suffix number.

SUFFIX DESIGNATION FIGURE

10 Refuel panel multi tank indicator (MTI), assembly 1
20 Circuit card display 2
30 Circuit card assembly, CPU 3

(c) To find a PN through the illustrated nomenclature :

1 Find the illustration that shows the breakdown of the assembly.
2 Find the part and make a note of the item number.
3 Look in the parts list related to the illustration for the item number. This
will also gives you the PNR and the description.

C. Use of the Detailed Parts List

(1) The detailed parts list includes the nomenclature and illustrations of the unit
components.
– 1st column : Figure and Item/Item variant number
– 2nd column : Part Number
– 3rd column : Airline Part Number
– 4th column : Indentation
– 5th column : Nomenclature
– 6th column : Units per Assembly
(2) Figure and Item Numbers
(a) An item number is given to each part-numbered assembly, sub-assembly or
item in the parts list.
(b) The figure number, which includes the items in the list, is given on the first
line at the top of each page.
(c) The highest assemblies for each figure shall be listed first. If there is more
than one part number for an assembly, use alpha variant item numbers e.g.
1A, 1B, 10A, 10B etc. In the usage code column of the assembly parts, the
letters are used to link parts to the correct assembly. Use alpha variant item
numbers for :
– Parts introduced by modification, product improvement, change of
material etc.
– Similar parts with different usage code.
– Optional parts, unless an alpha variant is listed for another reason. In
this case, optional part numbers must be given in the Nomenclature
column.
(d) Assemblies, sub-assemblies and parts in the list which are not illustrated are
identified with a dash (-) before the item number.

INTRO Page 10005

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

(3) Manufacturer's Part Number

(a) A manufacturer's part number is given to each assembly, sub-assembly and
detail parts (illustrated or not).
(4) Nomenclature
(a) Use the indenture system of a number in the indent column next to the
Nomenclature column to show how parts and assemblies relate to Next
Higher Assemblies (NHA), as follows:

1 2 3 4 5 6 7
Assembly
. Detail parts of assembly
. Subassembly
Attaching parts and/or storage parts for sub-assembly
* * *
. . Detail parts for sub-assembly
Sub-subassembly
Attaching parts and/or storage parts for sub-subassembly
* * *
. . . Detail parts for sub-subassembly
etc...

(b) A vendor code is given for all items or articles not made by the prime
manufacturer of the assembly.
(c) This vendor code or the abbreviation "NP" (Non Procurable) is written at the
far right-hand side in the first line of the nomenclature.
(5) Effectivity Code
(a) In a figure, the part number identified by an effectivity code shows that the
coded part must be used with other parts identified with the same alpha
designation. Also, coded parts can be used with all other non-coded parts
(no alpha designation).
(b) The effectivity code must begin with A and continue with B, C, ... Z. If
required, the succession will follow BA, CA, DA ... ZA, CB, DB, EB, ... DC,
EC, FC, etc. The succession will always begin with the subsequent alpha set
which follows the last set by one alpha.
(6) Units Per Assembly
(a) The units per assembly column shows the number of necessary units for the
subsequent higher assembly. In some cases, the letters "RF" (Reference) or
"AR" (As Required) replace this information.

INTRO Page 10006

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

(7) Abbreviations
– AR = As required
– DET = Detail
– LH and RH = Left and right
– NHA = Next higher assembly
– NP = Non procurable
– OLD PNR = Old part number
– ORDER OVERLGTH MPN = Actual part number is more than 15 characters
– OVERSIZE = Oversize repair parts
– POST SB = Post Service Bulletin
– POST SL = Post Service Letter
– R = Modified
– REPLD = Replaced By (refer to Interchangeability)
– REPLS = Replaces (refer to Interchangeability)
– RF = For reference
– SEL FROM = Select from parts
– SUPSD BY = Superseded by (refer to Interchangeability)
– SUPSDS = Supersedes (refer to Interchangeability)
– UNDERSIZE = Undersize repair parts
(a) Interchangeability
1 PNR replaced by : The part is replaced and is two-way interchangeable
with the item number shown (old part number can replace either old or
new part number when removed).
2 PNR replaces : The part replaces and is two-way interchangeable with
the item number shown (new part number is acceptable replacement
for old or new part number).
3 PNR superseded by : The part is superseded by and is one-way
interchangeable with the item number shown (old part number can be
used as replacement only where old part was installed).
4 PNR supersedes: The part supersedes and is one-way interchangeable
with the item number shown (new part number is acceptable
replacement for old or new part number).
(b) The following letters are used in the standard index :

T tera = 10exp(12)
G giga = 10exp(9)
M mega = 10exp(6)
K kilo = 10exp(3)
U one = 1
MY milli = 10exp(-3)
MU micro = 10exp(-6)

INTRO Page 10007

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

N nano = 10exp(-9)
P pico = 10exp(-12)

(c) The following letters are used in the standard index to indicate tolerances
on electronic components.

B 0.1%
C 0.25%
D 0.50%
F 1%
G 2%
J 5%
K 10%

(8) Updating
(a) When an item is revised, added or deleted, the letter "R" is written in the left
margin (the page date of issue changes).
(b) The letter "R" is written in the left margin opposite the page number when
all the item numbers are changed.

INTRO Page 10008

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

VENDOR'S CODE INDEX

VENDOR
NAME ADDRESS
CODE
F0110 AFNOR (ASSOCIATION FRANCAISE DE NORMALISATION)
11 AV FRANCIS DE PRESSENSE
93571 LA PLAINE ST DENIS CEDEX
FRANCE
F0331 STERLING SA-STE ELECTRIQUE
1 B RUE DE DELEMONT
68308 ST LOUIS
FRANCE
F5341 ZODIAC AEROTECHNICS
(OXYGEN SYSTEM EUROPE)
61 RUE PIERRE CURIE - 20001
78371 PLAISIR
FRANCE
F6117 DASSAULT AVIATION
9 ROND POINT DES CHAMPS ELYSEES-MARCEL DASSAULT
75008 PARIS
FRANCE

VCI Page 10009

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

THIS PAGE INTENTIONALLY LEFT BLANK

VCI Page 10010

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

ALPHA NUMERICAL INDEX

FIGURE ITEM TOTAL

PART NUMBER AIRLINE PART NUMBER
NUMBER NUMBER REQUIRED
023037 1 180 RF
1A 180 RF
1B 180 RF
1C 180 RF
1D 180 RF
1E 180 RF
1F 180 RF
1G 180 RF
1H 180 RF
1J 180 RF
1K 180 RF
050038 1D 25 2
1H 25 2
080223 1 210 1
1A 210 1
1B 210 1
1C 210 1
1D 210 1
1E 210 1
1F 210 1
1G 210 1
1H 210 1
1J 210 1
1K 210 1
080247 1D - 200B 1
080573 1C 220 1
1D 220 1
1G 220 1
1H 220 1
1K 220 1
080589 1 - 200 1
1A 200 1
1B 200 1
1C 200 1
1D 200 1
1G 200 1
1H 200 1
1J - 200A 1
1K - 200A 1
080590 1C - 200A 1
1D - 200A 1
1E 200 1
1F 200 1
1G - 200A 1
1H - 200A 1
1J 200 1
1K 200 1

NI/ALPHA Page 10011

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

FIGURE ITEM TOTAL

PART NUMBER AIRLINE PART NUMBER
NUMBER NUMBER REQUIRED
081522 1K - 200B 1
406358 1 110 RF
1A 110 RF
1B 110 RF
1C 110 RF
1D 110 RF
1E 110 RF
1F 110 RF
1G - 110 RF
1H 110 RF
1J 110 RF
1K 110 RF
407527 1A 90 RF
1B 90 RF
408519 1 90 RF
1A - 90A RF
1B - 90A RF
1D 90 RF
1G 90 RF
1H 90 RF
1J - 90F RF
1K 90 RF
416611 1 - 70 RF
1A - 70 RF
1B - 70 RF
1C - 70 RF
1D - 70 RF
1E - 70 RF
1F - 70 RF
1G - 70 RF
1H - 70 RF
1J - 70 RF
419628 1 170 RF
1A 170 RF
1B 170 RF
1C 170 RF
1D 170 RF
1E 170 RF
1F 170 RF
1G 170 RF
1H 170 RF
1J 170 RF
1K 170 RF
421B161 1C - 90H RF
1D - 90F RF
1E - 90D RF
1F - 90F RF

NI/ALPHA Page 10012

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

FIGURE ITEM TOTAL

PART NUMBER AIRLINE PART NUMBER
NUMBER NUMBER REQUIRED
1G - 90H RF
1J - 90H RF
421B224 1 - 90D RF
1A - 90H RF
1B - 90J RF
1C - 90J RF
1K - 90B RF
421B225 1A - 90J RF
437276 1 150A RF
1A 150A RF
1B 150A RF
1C 150A RF
1D 150A RF
1E 150A RF
1F 150A RF
1G 150A RF
1H 150A RF
1J 150A RF
1K 150 RF
441067 1 - 90A RF
1A - 90B RF
1B - 90B RF
1C 90 RF
1H - 90A RF
444289 1A - 90C RF
448239 1C - 90A RF
1D - 90A RF
1E 90 RF
1F 90 RF
1G - 90A RF
1H - 90B RF
1J - 90B RF
448240 1C - 90B RF
1D - 90B RF
1E - 90A RF
1F - 90A RF
1G - 90B RF
1J 90 RF
448241 1C - 90C RF
448464 1 - 150 RF
1A - 150 RF
1B - 150 RF
1C - 150 RF
1D - 150 RF
1E - 150 RF
1F - 150 RF
1G - 150 RF

NI/ALPHA Page 10013

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

FIGURE ITEM TOTAL

PART NUMBER AIRLINE PART NUMBER
NUMBER NUMBER REQUIRED
1H - 150 RF
1J - 150 RF
449039 1 70A RF
1A 70A RF
1B 70A RF
1C - 70A RF
1D 70A RF
1E 70A RF
1F 70A RF
1G 70A RF
1H 70A RF
1J 70A RF
1K 70 RF
450056 1B - 90D RF
450058 1F - 90B RF
1G - 90C RF
1J - 90A RF
451699 1 - 90C RF
1A - 90D RF
1B - 90E RF
1D - 90D RF
1G - 90F RF
1H - 90C RF
1J - 90G RF
1K - 90C RF
451700 1 - 90B RF
1A - 90E RF
1B - 90F RF
1C - 90D RF
1H - 90D RF
451701 1C - 90E RF
1D - 90C RF
1E - 90B RF
1F - 90E RF
1G - 90D RF
1H - 90E RF
1J - 90D RF
1K - 90A RF
451702 1C - 90F RF
451704 1C - 90G RF
1D - 90E RF
1E - 90C RF
1F - 90C RF
1G - 90E RF
1J - 90E RF
451709 1A - 90F RF
1B - 90G RF

NI/ALPHA Page 10014

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

FIGURE ITEM TOTAL

PART NUMBER AIRLINE PART NUMBER
NUMBER NUMBER REQUIRED
451711 1A - 90G RF
451712 1B - 90H RF
451714 1F - 90D RF
1G - 90G RF
1J - 90C RF
A1N0IR 1 - 115 RF
1A - 115 RF
1B - 115 RF
1C - 115 RF
1D - 115 RF
1E - 115 RF
1F - 115 RF
1G - 115 RF
1H - 115 RF
1J - 115 RF
1K - 115 RF
DTS4001 1C 160 1
DTS4005 1C - 160A 1
1G 160 1
1H 160 1
DTS4006 1F 160 1
1G - 160A 1
DTS4008 1A 160 1
1B 160 1
1C - 160B 1
DTS4010 1B - 160A 1
1G - 160B 1
DTS4012 1B - 160B 1
1C - 160C 1
DTS4014 1D 160 1
DTS4019 1D - 160A 1
DTS4020 1 160 1
1F 160A 1
1G - 160C 1
DTS4021 1 - 160A 1
1B - 160C 1
1C - 160D 1
1D - 160B 1
1F 160B 1
1G - 160D 1
DTS4022 1K - 160E 1
DTS4023 1K - 160F 1
DTS4024 1A - 160A 1
1D - 160C 1
1E 160 1
DTS4025 1 - 160B 1
1C - 160E 1

NI/ALPHA Page 10015

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

FIGURE ITEM TOTAL

PART NUMBER AIRLINE PART NUMBER
NUMBER NUMBER REQUIRED
1E - 160A 1
1F 160C 1
DTS4029 1 - 160C 1
1B - 160D 1
1C - 160F 1
1D - 160D 1
1E - 160B 1
1F 160D 1
1G - 160E 1
1H - 160G 1
DTS4030 1 - 160D 1
1E - 160C 1
1F 160E 1
1J 160A 1
DTS4032 1A - 160B 1
1C - 160H 1
1D - 160E 1
1G - 160G 1
1H - 160B 1
1J - 160C 1
1K - 160H 1
DTS4033 1E - 160D 1
DTS4035 1A - 160C 1
1C - 160J 1
1D - 160F 1
1K - 160G 1
DTS4040 1C - 160G 1
1G - 160F 1
1H - 160A 1
DTS4045 1E - 160E 1
1F 160F 1
DTS4046 1 - 160E 1
1F 160G 1
1G - 160H 1
1K - 160A 1
DTS4047 1 - 160F 1
DTS4048 1 - 160G 1
DTS4049 1H - 160C 1
DTS4051 1 - 160H 1
1A - 160D 1
1E - 160F 1
DTS4054 1B - 160E 1
DTS4059 1G - 160J 1
1H - 160D 1
DTS4060 1D - 160G 1
DTS4062 1A - 160E 1
DTS4063 1 - 160J 1

NI/ALPHA Page 10016

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

FIGURE ITEM TOTAL

PART NUMBER AIRLINE PART NUMBER
NUMBER NUMBER REQUIRED
1A - 160F 1
1G - 160K 1
DTS4065 1C - 160K 1
1D - 160H 1
DTS4069 1B - 160F 1
DTS4070 1C - 160L 1
1D - 160J 1
1G - 160L 1
DTS4071 1B - 160G 1
DTS4074 1A - 160G 1
DTS4076 1H - 160E 1
DTS4090 1H - 160F 1
DTS4095 1F 160H 1
1G - 160M 1
1J 160 1
DTS4100 1K - 160B 1
DTS4102 1 - 160K 1
DTS4103 1B - 160H 1
DTS4104 1D - 160K 1
1K 160 1
DTS4109 1F 160J 1
1G - 160N 1
DTS4117 1A - 160H 1
1G - 160P 1
DTS4119 1 - 160L 1
DTS4122 1B - 160J 1
DTS4131 1G - 160Q 1
DTS4142 1 - 160M 1
DTS4145 1H - 160H 1
DTS4161 1J - 160B 1
DTS4167 1J - 160D 1
DTS4181 1K - 160C 1
H1Q1ZD020014APA 1 130 RF
1A 130 RF
1B 130 RF
1C 130 RF
1D 130 RF
1E 130 RF
1F 130 RF
1G - 130 RF
1H 130 RF
1J 130 RF
1K 130 RF
H2Q1ZD020018APA 1 140 RF
1A 140 RF
1B 140 RF
1C 140 RF

NI/ALPHA Page 10017

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

FIGURE ITEM TOTAL

PART NUMBER AIRLINE PART NUMBER
NUMBER NUMBER REQUIRED
1D 140 RF
1E 140 RF
1F 140 RF
1G - 140 RF
1H 140 RF
1J 140 RF
1K 140 RF
LHQ1UY020004U 1 120 RF
1A 120 RF
1B 120 RF
1C 120 RF
1D 120 RF
1E 120 RF
1F 120 RF
1G - 120 RF
1H 120 RF
1J 120 RF
1K 120 RF
LJQ1ZD030005UPA 1 - 80 RF
1A - 80 RF
1B - 80 RF
1C - 80 RF
1D - 80 RF
1E - 80 RF
1F - 80 RF
1G - 80 RF
1H - 80 RF
1J - 80 RF
MC10-02-01 1 - 1 RF
MC10-02-02 1 - 1A RF
MC10-02-03 1 - 1B RF
MC10-02-04 1 - 1C RF
MC10-02-05 1 - 1D RF
MC10-02-06 1 - 1E RF
MC10-02-07 1 - 1F RF
MC10-02-10 1 - 1G RF
MC10-02-102 1 - 1N RF
MC10-02-103 1K - 1A RF
MC10-02-104 1 - 1P RF
MC10-02-105 1 - 1Q RF
MC10-02-106 1 - 1R RF
MC10-02-107 1 - 1S RF
MC10-02-108 1 - 1T RF
MC10-02-109 1 - 1U RF
MC10-02-112 1 - 1V RF
MC10-02-114 1K - 1B RF
MC10-02-115 1 - 1W RF

NI/ALPHA Page 10018

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

FIGURE ITEM TOTAL

PART NUMBER AIRLINE PART NUMBER
NUMBER NUMBER REQUIRED
MC10-02-116 1 - 1X RF
MC10-02-117 1 - 1Y RF
MC10-02-121 1A - 1 RF
MC10-02-155 1A - 1A RF
MC10-02-169 1A - 1B RF
MC10-02-170 1A - 1C RF
MC10-02-171 1H - 1V RF
MC10-02-22 1 - 1H RF
MC10-02-50 1 - 1J RF
MC10-02-54 1 - 1K RF
MC10-02-55 1 - 1L RF
MC10-02-60 1K - 1C RF
MC10-02-69 1 - 1M RF
MC10-04-01 1A - 1D RF
MC10-04-02 1A - 1E RF
MC10-04-07 1A - 1F RF
MC10-04-101 1A - 1L RF
MC10-04-102 1A - 1M RF
MC10-04-105 1A - 1N RF
MC10-04-107 1A - 1P RF
MC10-04-109 1A - 1Q RF
MC10-04-110 1A - 1R RF
MC10-04-111 1A - 1S RF
MC10-04-112 1A - 1T RF
MC10-04-115 1A - 1U RF
MC10-04-116 1A - 1V RF
MC10-04-121 1A - 1W RF
MC10-04-122 1A - 1X RF
MC10-04-127 1A - 1Y RF
MC10-04-157 1B - 1 RF
MC10-04-159 1B - 1A RF
MC10-04-177 1B - 1B RF
MC10-04-21 1A - 1G RF
MC10-04-22 1A - 1H RF
MC10-04-27 1A - 1J RF
MC10-04-77 1A - 1K RF
MC10-05-04 1B - 1C RF
MC10-05-100 1B - 1D RF
MC10-05-101 1B - 1E RF
MC10-05-102 1H - 1X RF
MC10-05-104 1B - 1F RF
MC10-05-124 1B - 1G RF
MC10-05-152 1B - 1H RF
MC10-06-00 1B - 1J RF
MC10-06-01 1B - 1K RF
MC10-06-03 1B - 1L RF
MC10-06-100 1B - 1Q RF

NI/ALPHA Page 10019

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

FIGURE ITEM TOTAL

PART NUMBER AIRLINE PART NUMBER
NUMBER NUMBER REQUIRED
MC10-06-101 1B - 1R RF
MC10-06-102 1B - 1S RF
MC10-06-104 1B - 1T RF
MC10-06-105 1B - 1U RF
MC10-06-106 1B - 1V RF
MC10-06-120 1B - 1W RF
MC10-06-121 1B - 1X RF
MC10-06-124 1B - 1Y RF
MC10-06-125 1C - 1 RF
MC10-06-126 1C - 1A RF
MC10-06-127 1K - 1E RF
MC10-06-128 1K - 1F RF
MC10-06-20 1B - 1M RF
MC10-06-21 1B - 1N RF
MC10-06-23 1B - 1P RF
MC10-08-00 1C - 1B RF
MC10-08-01 1C - 1C RF
MC10-08-02 1C - 1D RF
MC10-08-05 1C - 1E RF
MC10-08-09 1C - 1F RF
MC10-08-100 1C - 1J RF
MC10-08-102 1C - 1K RF
MC10-08-103 1C - 1L RF
MC10-08-104 1C - 1M RF
MC10-08-106 1C - 1N RF
MC10-08-107 1C - 1P RF
MC10-08-108 1C - 1Q RF
MC10-08-109 1C - 1R RF
MC10-08-110 1C - 1S RF
MC10-08-111 1C - 1T RF
MC10-08-112 1C - 1U RF
MC10-08-114 1K - 1J RF
MC10-08-116 1K - 1K RF
MC10-08-120 1C - 1V RF
MC10-08-123 1C - 1W RF
MC10-08-124 1C - 1X RF
MC10-08-126 1C - 1Y RF
MC10-08-127 1D - 1 RF
MC10-08-128 1D - 1A RF
MC10-08-13 1C - 1G RF
MC10-08-209 1D - 1B RF
MC10-08-25 1C - 1H RF
MC10-09-00 1D - 1C RF
MC10-09-01 1D - 1D RF
MC10-10-100 1D - 1E RF
MC10-10-101 1D - 1F RF
MC10-10-102 1D - 1G RF

NI/ALPHA Page 10020

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

FIGURE ITEM TOTAL

PART NUMBER AIRLINE PART NUMBER
NUMBER NUMBER REQUIRED
MC10-10-103 1D - 1H RF
MC10-10-104 1D - 1J RF
MC10-12-100 1D - 1K RF
MC10-12-101 1D - 1L RF
MC10-12-150 1D - 1M RF
MC10-12-151 1D - 1N RF
MC10-12-152 1K - 1 RF
MC10-13-02 1D - 1P RF
MC10-13-03 1D - 1Q RF
MC10-13-04 1D - 1R RF
MC10-13-05 1D - 1S RF
MC10-13-102 1D - 1T RF
MC10-13-103 1D - 1U RF
MC10-13-104 1D - 1V RF
MC10-13-114 1D - 1W RF
MC10-13-150 1D - 1X RF
MC10-13-151 1K - 1G RF
MC10-14-00 1D - 1Y RF
MC10-14-01 1E - 1 RF
MC10-14-02 1E - 1A RF
MC10-14-100 1E - 1E RF
MC10-14-101 1E - 1F RF
MC10-14-102 1E - 1G RF
MC10-14-103 1E - 1H RF
MC10-14-104 1E - 1J RF
MC10-14-120 1E - 1K RF
MC10-14-121 1E - 1L RF
MC10-14-122 1E - 1M RF
MC10-14-123 1E - 1N RF
MC10-14-124 1E - 1P RF
MC10-14-151 1E - 1Z RF
MC10-14-20 1E - 1B RF
MC10-14-21 1E - 1C RF
MC10-14-22 1E - 1D RF
MC10-15-01 1E - 1Q RF
MC10-15-02 1E - 1R RF
MC10-15-03 1E - 1S RF
MC10-15-04 1E - 1T RF
MC10-15-05 1E - 1U RF
MC10-15-07 1E - 1V RF
MC10-15-09 1E - 1W RF
MC10-15-10 1E - 1X RF
MC10-15-101 1F - 1D RF
MC10-15-102 1F - 1E RF
MC10-15-104 1F - 1F RF
MC10-15-105 1F - 1G RF
MC10-15-107 1F - 1H RF

NI/ALPHA Page 10021

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

FIGURE ITEM TOTAL

PART NUMBER AIRLINE PART NUMBER
NUMBER NUMBER REQUIRED
MC10-15-108 1F - 1J RF
MC10-15-109 1F - 1K RF
MC10-15-11 1E - 1Y RF
MC10-15-113 1F - 1L RF
MC10-15-114 1F - 1M RF
MC10-15-115 1F - 1N RF
MC10-15-116 1F - 1P RF
MC10-15-117 1F - 1Q RF
MC10-15-118 1F - 1R RF
MC10-15-119 1F - 1S RF
MC10-15-12 1F - 1 RF
MC10-15-120 1F - 1T RF
MC10-15-121 1F - 1U RF
MC10-15-122 1J - 1D RF
MC10-15-13 1F - 1A RF
MC10-15-151 1F - 1V RF
MC10-15-152 1J - 1B RF
MC10-15-155 1J - 1C RF
MC10-15-157 1F - 1W RF
MC10-15-158 1F - 1X RF
MC10-15-159 1F - 1Y RF
MC10-15-166 1G - 1 RF
MC10-15-167 1G - 1A RF
MC10-15-168 1J - 1 RF
MC10-15-17 1F - 1B RF
MC10-15-170 1G - 1B RF
MC10-15-171 1G - 1C RF
MC10-15-176 1G - 1D RF
MC10-15-18 1F - 1C RF
MC10-16-100 1G - 1E RF
MC10-16-101 1G - 1F RF
MC10-16-103 1G - 1G RF
MC10-16-104 1G - 1H RF
MC10-16-105 1G - 1J RF
MC10-16-150 1G - 1K RF
MC10-16-151 1G - 1L RF
MC10-16-152 1G - 1M RF
MC10-16-153 1J - 1A RF
MC10-17-00 1G - 1N RF
MC10-17-100 1G - 1P RF
MC10-17-101 1G - 1Q RF
MC10-19-00 1G - 1R RF
MC10-19-01 1G - 1S RF
MC10-19-02 1G - 1T RF
MC10-19-03 1K - 1L RF
MC10-19-101 1G - 1U RF
MC10-19-102 1G - 1V RF

NI/ALPHA Page 10022

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

FIGURE ITEM TOTAL

PART NUMBER AIRLINE PART NUMBER
NUMBER NUMBER REQUIRED
MC10-19-103 1G - 1W RF
MC10-19-104 1K - 1M RF
MC10-19-151 1H - 1Y RF
MC10-20-00 1G - 1X RF
MC10-22-00 1G - 1Y RF
MC10-22-01 1H - 1 RF
MC10-22-100 1H - 1A RF
MC10-22-101 1H - 1B RF
MC10-25-00 1H - 1C RF
MC10-25-01 1H - 1D RF
MC10-25-02 1K - 1N RF
MC10-25-04 1H - 1E RF
MC10-25-101 1H - 1F RF
MC10-25-102 1H - 1G RF
MC10-25-103 1H - 1H RF
MC10-25-104 1H - 1J RF
MC10-25-105 1H - 1K RF
MC10-25-106 1H - 1L RF
MC10-25-107 1H - 1W RF
MC10-25-108 1J - 1F RF
MC10-25-110 1K - 1H RF
MC10-25-124 1H - 1M RF
MC10-25-154 1H - 1N RF
MC10-25-158 1H - 1P RF
MC10-25-159 1K - 1D RF
MC10-25-204 1H - 1Q RF
MC10-32-101 1H - 1R RF
MC10-32-102 1H - 1S RF
MC10-32-103 1H - 1T RF
MC10-35-101 1H - 1U RF
MC10-35-102 1J - 1E RF
MXA1006 1 50 1
1B 50 1
1C 50 1
1D 50 1
1E 50 1
1F 50 1
1G 50 1
MXA1012 1B - 50A 1
1K - 50C 1
MXA1016 1 - 50A 1
1A 50 1
1B - 50B 1
- 50J 1
1C - 50A 1
1D - 50A 1
1F - 50A 1

NI/ALPHA Page 10023

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

FIGURE ITEM TOTAL

PART NUMBER AIRLINE PART NUMBER
NUMBER NUMBER REQUIRED
1G - 50A 1
1H 50 1
1K - 50D 1
MXA1018 1B - 50C 1
1C - 50B 1
MXA1021 1D - 50B 1
MXA1031 1 - 50B 1
1A - 50A 1
1C - 50C 1
1D - 50C 1
MXA1033 1D - 50D 1
MXA1035 1 - 50C 1
1E - 50A 1
1F - 50B 1
1H - 50G 1
1J 50A 1
MXA1036 1D - 50E 1
1E - 50B 1
1F - 50C 1
MXA1038 1 - 50D 1
1D - 50F 1
1G - 50B 1
1H - 50A 1
MXA1040 1H - 50B 1
MXA1041 1D - 50G 1
MXA1042 1 - 50E 1
1A - 50B 1
1B - 50D 1
1C - 50D 1
1D - 50H 1
1E - 50C 1
1F - 50D 1
1G - 50C 1
1H - 50C 1
1J 50 1
1K 50 1
MXA1044 1B - 50E 1
1C - 50E 1
1E - 50D 1
1F - 50E 1
1H - 50D 1
MXA1045 1 - 50F 1
1A - 50C 1
1B - 50F 1
1E - 50E 1
MXA1046 1B - 50G 1
1K - 50B 1

NI/ALPHA Page 10024

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

FIGURE ITEM TOTAL

PART NUMBER AIRLINE PART NUMBER
NUMBER NUMBER REQUIRED
MXA1049 1H - 50E 1
MXA1050 1A - 50D 1
MXA1051 1 - 50G 1
1B - 50H 1
1C - 50F 1
1D - 50J 1
1E - 50G 1
1F - 50F 1
1G - 50D 1
1J - 50B 1
1K - 50A 1
MXA1052 1H - 50F 1
MXA1054 1C - 50G 1
1K - 50E 1
MXA1059 1H - 50H 1
MXH14-1 1C 10 1
MXH14-21 1C 10B 1
MXH14-31 1C - 10E 1
MXH15-2 1 10 1
1A 10 1
1B 10 1
1C - 10A 1
1D 10 1
1E 10 1
1F 10 1
1G 10 1
1H 10 1
MXH15-22 1 - 10C 1
1A - 10D 1
1B 10D 1
1C - 10C 1
1D - 10C 1
1E - 10A 1
1F - 10C 1
1G - 10C 1
1H - 10C 1
1J - 10B 1
MXH15-23 1J - 10D 1
MXH15-32 1 - 10G 1
1A - 10F 1
1B - 10H 1
1C - 10D 1
1D - 10D 1
1E - 10B 1
1F - 10F 1
1G - 10F 1
1H - 10E 1

NI/ALPHA Page 10025

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

FIGURE ITEM TOTAL

PART NUMBER AIRLINE PART NUMBER
NUMBER NUMBER REQUIRED
1J - 10E 1
1K - 10A 1
MXH15-33 1J - 10J 1
MXH15-34 1K - 10B 1
MXH16 1 - 10A 1
1A - 10A 1
1B - 10A 1
1F - 10A 1
1H - 10A 1
MXH16-20 1 - 10D 1
1A - 10E 1
1B - 10E 1
1F - 10D 1
1H - 10D 1
1J - 10C 1
MXH16-30 1 - 10F 1
1A - 10H 1
1B - 10K 1
1F - 10G 1
1H - 10G 1
1J - 10H 1
MXH19 1B - 10B 1
MXH19-20 1B - 10F 1
MXH19-30 1B - 10J 1
MXH20 1E - 10C 1
MXH20-1 1A - 10B 1
1D - 10A 1
1E - 10D 1
1F - 10B 1
1G - 10A 1
1J - 10A 1
MXH21-1 1 - 10B 1
1A - 10C 1
1B - 10C 1
1G - 10B 1
1H - 10B 1
1J 10 1
MXH21-31 1 - 10E 1
1A - 10G 1
1B - 10G 1
1D - 10E 1
1E - 10E 1
1F - 10E 1
1G - 10D 1
- 10E 1
1H - 10F 1
1J - 10F 1

NI/ALPHA Page 10026

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

FIGURE ITEM TOTAL

PART NUMBER AIRLINE PART NUMBER
NUMBER NUMBER REQUIRED
- 10G 1
1K - 10D 1
MXH22-30 1K - 10C 1
MXH61 1D 10B 1
MXH61-30 1D - 10F 1
1K 10 1
MXM22 1 30 1
1A 30 1
1B 30 1
1C 30 1
1D 30 1
1E 30 1
1F 30 1
1G 30 1
1H 30 1
1K - 30A 1
MXM23 1 - 30A 1
1A - 30A 1
1B - 30A 1
1C - 30A 1
1D - 30A 1
1E - 30A 1
1F - 30A 1
1G - 30A 1
1H - 30A 1
1J 30 1
1K 30 1
R00490X190A50D5 1 190 RF
1A 190 RF
1B 190 RF
1C 190 RF
1D 190 RF
1E 190 RF
1F 190 RF
1G 190 RF
1H 190 RF
1J 190 RF
1K 190 RF
RMC1002 1D 60 1
RMC1005 1G 60 1
1H - 60F 1
RMC1006 1B 60 1
1H - 60G 1
RMC1007 1C 60 1
RMC1007-1 1C - 60A 1
1D - 60A 1
RMC1007-3 1C - 60B 1

NI/ALPHA Page 10027

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

FIGURE ITEM TOTAL

PART NUMBER AIRLINE PART NUMBER
NUMBER NUMBER REQUIRED
RMC1007-5 1C - 60C 1
RMC1008 1A 60 1
1B - 60A 1
RMC1008-1 1A - 60A 1
RMC1008-2 1A - 60B 1
RMC1012 1G - 60A 1
RMC1016 1G - 60B 1
RMC1016-1 1G - 60C 1
1J 60 1
RMC1018 1 60 1
1A - 60C 1
1B - 60B 1
1G - 60D 1
1H 60 1
RMC1018-1 1H - 60A 1
1K 60 1
RMC1018-2 1 - 60A 1
1A - 60D 1
1B - 60C 1
1C - 60D 1
1H - 60B 1
RMC1018-5 1H - 60C 1
RMC1018-6 1J - 60K 1
RMC1019 1D - 60B 1
RMC1019-1 1D - 60C 1
RMC1019-2 1D - 60D 1
RMC1020 1D - 60E 1
1E 60 1
RMC1020-1 1E - 60A 1
RMC1022 1E - 60B 1
1F 60 1
RMC1022-1 1E - 60C 1
1F - 60A 1
1G - 60E 1
1J - 60B 1
RMC1022-2 1E - 60D 1
1F - 60B 1
1G - 60F 1
RMC1022-3 1E - 60E 1
1F - 60C 1
1G - 60G 1
RMC1022-4 1D - 60F 1
RMC1022-5 1D - 60G 1
RMC1022-6 1F - 60D 1
1G - 60H 1
RMC1022-7 1F - 60E 1
1J - 60A 1

NI/ALPHA Page 10028

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

FIGURE ITEM TOTAL

PART NUMBER AIRLINE PART NUMBER
NUMBER NUMBER REQUIRED
RMC1029 1H - 60D 1
RMC1035 1H - 60E 1
1J - 60D 1
RMC1106 1B - 60D 1
RMC1122-3 1F - 60F 1
1G - 60J 1
1J - 60C 1
RMC2002 1D - 60L 1
RMC2005 1G - 60N 1
1H - 60P 1
1K - 60G 1
RMC2006 1B - 60E 1
1H - 60Q 1
RMC2007 1C - 60E 1
RMC2007-1 1C - 60F 1
1D - 60M 1
1K - 60F 1
RMC2007-3 1C - 60G 1
RMC2007-5 1C - 60H 1
RMC2008 1A - 60E 1
1B - 60F 1
RMC2008-1 1A - 60F 1
RMC2008-2 1A - 60G 1
RMC2012 1G - 60P 1
RMC2016 1G - 60L 1
RMC2016-1 1G - 60M 1
1J - 60F 1
RMC2018 1 - 60C 1
1A - 60H 1
1B - 60G 1
1G - 60Q 1
1H - 60H 1
RMC2018-1 1H - 60J 1
1K - 60D 1
RMC2018-2 1 - 60B 1
1A - 60J 1
1B - 60H 1
1C - 60J 1
1H - 60K 1
1K - 60B 1
RMC2018-3 1K - 60C 1
RMC2018-5 1H - 60L 1
RMC2018-6 1J - 60L 1
RMC2019 1D - 60N 1
1K - 60E 1
RMC2019-1 1D - 60H 1
RMC2019-2 1D - 60P 1

NI/ALPHA Page 10029

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

FIGURE ITEM TOTAL

PART NUMBER AIRLINE PART NUMBER
NUMBER NUMBER REQUIRED
RMC2020 1D - 60Q 1
1E - 60F 1
RMC2020-1 1E - 60G 1
RMC2022 1E - 60H 1
1F - 60L 1
RMC2022-1 1E - 60J 1
1F - 60H 1
1G - 60R 1
1J - 60H 1
RMC2022-2 1E - 60K 1
1F - 60J 1
1G - 60S 1
RMC2022-3 1E - 60L 1
1F - 60G 1
1G - 60K 1
RMC2022-4 1D - 60K 1
RMC2022-5 1D - 60J 1
1K - 60A 1
RMC2022-6 1F - 60M 1
1G - 60T 1
RMC2022-7 1F - 60N 1
1J - 60G 1
RMC2029 1H - 60M 1
RMC2035 1H - 60N 1
1J - 60J 1
RMC2106 1B - 60J 1
RMC2122-3 1F - 60K 1
1G - 60U 1
1J - 60E 1
YSQ1ZD020006APA 1 20 RF
1A 20 RF
1B 20 RF
1C 20 RF
1D 20 RF
1E 20 RF
1F 20 RF
1G 20 RF
1H 20 RF
1J 20 RF
1K 20 RF
YSQ1ZD020008APA 1 100 RF
1A 100 RF
1B 100 RF
1C 100 RF
1D 100 RF
1E 100 RF
1F 100 RF

NI/ALPHA Page 10030

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

FIGURE ITEM TOTAL

PART NUMBER AIRLINE PART NUMBER
NUMBER NUMBER REQUIRED
1G - 100 RF
1H 100 RF
1J 100 RF
1K 100 RF

NI/ALPHA Page 10031

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

THIS PAGE INTENTIONALLY LEFT BLANK

NI/ALPHA Page 10032

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

DETAILED PARTS LIST

DPL Page 10033

35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

REGULATOR, CREW OXYGEN MASK

SHEET 1 OF 1
Figure 1/GRAPHIC-35-13-63-991-801-A01

Page 10033
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1
-1 MC10-02-01 REGULATOR, CREW OXYGEN A RF
MASK
- 1A MC10-02-02 REGULATOR, CREW OXYGEN B RF
MASK
- 1B MC10-02-03 REGULATOR, CREW OXYGEN C RF
MASK
- 1C MC10-02-04 REGULATOR, CREW OXYGEN D RF
MASK
- 1D MC10-02-05 REGULATOR, CREW OXYGEN E RF
MASK
- 1E MC10-02-06 REGULATOR, CREW OXYGEN F RF
MASK
- 1F MC10-02-07 REGULATOR, CREW OXYGEN G RF
MASK
- 1G MC10-02-10 REGULATOR, CREW OXYGEN H RF
MASK
- 1H MC10-02-22 REGULATOR, CREW OXYGEN J RF
MASK
- 1J MC10-02-50 REGULATOR, CREW OXYGEN K RF
MASK
- 1K MC10-02-54 REGULATOR, CREW OXYGEN L RF
MASK
- 1L MC10-02-55 REGULATOR, CREW OXYGEN M RF
MASK
- 1M MC10-02-69 REGULATOR, CREW OXYGEN N RF
MASK
- 1N MC10-02-102 REGULATOR, CREW OXYGEN P RF
MASK
- 1P MC10-02-104 REGULATOR, CREW OXYGEN Q RF
MASK
- 1Q MC10-02-105 REGULATOR, CREW OXYGEN R RF
MASK
- 1R MC10-02-106 REGULATOR, CREW OXYGEN S RF
MASK
- 1S MC10-02-107 REGULATOR, CREW OXYGEN T RF
MASK
- 1T MC10-02-108 REGULATOR, CREW OXYGEN U RF
MASK
- 1U MC10-02-109 REGULATOR, CREW OXYGEN NP V RF
MASK
- 1V MC10-02-112 REGULATOR, CREW OXYGEN W RF
MASK
- 1W MC10-02-115 REGULATOR, CREW OXYGEN X RF
MASK
- 1X MC10-02-116 REGULATOR, CREW OXYGEN Y RF
MASK
- 1Y MC10-02-117 REGULATOR, CREW OXYGEN Z RF
MASK
- ITEM NOT ILLUSTRATED

Page 10034
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1
10 MXH15-2 . HARNESS,INFLATABLE ASSY NP A B C D 1
RPLD BY MXH15-22 EFGH
SEE CMM 35-13-71 (F5341) JPQR
FOR DET STUV
WYZ
- 10A MXH16 . HARNESS,INFLATABLE,ASSY NP X 1
RPLD BY MXH16-20
SEE CMM 35-13-71 (F5341)
FOR DET
- 10B MXH21-1 . HARNESS,INFLATABLE,ASSY NP K L M N 1
SUPSD BY MXH21-31
SEE CMM 35-13-71 (F5341)
FOR DET
- 10C MXH15-22 . HARNESS,INFLATABLE ASSY NP A B C D 1
RPLS MXH15-2 EFGH
SUPSD BY MXH15-32 JPQR
POST SB MC10-35-209 STUV
POST SB MA-B-C-F10-35-144 WYZ
POST SB MC10-MF10-35-212
POST SB MC10-02-35-218
POST SB MC10-35-209
POST SB MC10-35-207
SEE CMM 35-13-71 (F5341)
FOR DET
- 10D MXH16-20 . HARNESS,INFLATABLE,ASSY NP X 1
RPLS MXH16
SUPSD BY MXH16-30
SEE CMM 35-13-71 (F5341)
FOR DET
- 10E MXH21-31 . HARNESS,INFLATABLE,ASSY KLMN 1
SUPSDS MXH21-1
POST SB MC10-35-274
POST SB MA-B-C-F10-35-260
SEE CMM 35-13-71 (F5341)
FOR DET
- 10F MXH16-30 . HARNESS,INFLATABLE,ASSY X 1
SUPSDS MXH16-20
POST SB MA-B-C-F10-35-260
SEE CMM 35-13-71 (F5341)
FOR DET
- 10G MXH15-32 . HARNESS,INFLATABLE ASSY ABCD 1
SUPSDS MXH15-22 EFGH
POST SB MA-B-C-F10-35-260 JPQR
SEE CMM 35-13-71 (F5341) STUV
FOR DET WYZ

- ITEM NOT ILLUSTRATED

Page 10035
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1
ATTACHING PARTS
20 YSQ1ZD020006APA . SCREW FBS90 M2X6 A4-70 PSVT F0110 RF
(P150001)
***
30 MXM22 . MASK,ASSY ABCD 1
SEE CMM 35-13-71 (F5341) E F G
FOR DET HJKL
MN
- 30A MXM23 . MASK,ASSY PQRS 1
SEE CMM 35-13-71 (F5341) TUVW
FOR DET XYZ
50 MXA1006 . MICROPHONE,ASSY NP C T W 1
RPLD BY MXA1051
SEE CMM 35-13-71 (F5341)
FOR DET
- 50A MXA1016 . MICROPHONE,ASSY L V 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50B MXA1031 . MICROPHONE,ASSY DQ 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50C MXA1035 . MICROPHONE,ASSY ABEF 1
SEE CMM 35-13-71 (F5341) G J M
FOR DET P S
- 50D MXA1038 . MICROPHONE,ASSY N 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50E MXA1042 . MICROPHONE,ASSY H R X 1
SEE CMM 35-13-71 (F5341) Y Z
FOR DET
- 50F MXA1045 . MICROPHONE,ASSY U 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50G MXA1051 . MICROPHONE,ASSY CKTW 1
RPLS MXA1006
SEE CMM 35-13-71 (F5341)
FOR DET
60 RMC1018 . REGULATOR,ASSY NP D G H N 1
RPLD BY RMC2018 QSWZ
SEE CMM 35-13-70 (F5341)
FOR DET
- 60A RMC1018-2 . REGULATOR,ASSY NP A B C E 1
RPLD BY RMC2018-2 FJKL
SEE CMM 35-13-70 (F5341) MPRT
FOR DET UVXY

- ITEM NOT ILLUSTRATED

Page 10036
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1
- 60B RMC2018-2 . REGULATOR,ASSY ABCE 1
RPLS RMC1018-2 FJKL
POST SB MC10-35-210 MPRT
POST SB MC10-35-170 UVXY
POST SB MC10-02-35-218
SEE CMM 35-13-74 (F5341)
FOR DET
- 60C RMC2018 . REGULATOR,ASSY DGHN 1
RPLS RMC1018 QSWZ
POST SB MC10-35-170
POST SB MC10-35-207
SEE CMM 35-13-74 (F5341)
FOR DET
ATTACHING PARTS
- 70 416611 . LOCK, MASK NP RF
RPLD BY 449039
70A 449039 . LOCK,MASK ASSY RF
RPLS 416611
POST SB MA-B-C-F10-35-89
- 80 LJQ1ZD030005UPA . SCREW, CL M3X5 NP RF
PRE SB MA-B-C-F10-35-89
***
90 408519 .. COVERPLATE,ASSY DGHN RF
SUPSD BY 451699 QSWZ
- 90A 441067 .. COVERPLATE,ASSY ABCE RF
SUPSD BY 451700 FJKL
MPRT
UVXY
- 90B 451700 .. COVERPLATE,ASSY ABCE RF
SUPSD BY 421B224 FJKL
SUPSDS 441067 MPRT
POST SB MC10-35-210 UVXY
POST SB MC10-35-170
POST SB MC10-02-35-218
- 90C 451699 .. COVERPLATE,ASSY DGHN RF
SUPSDS 408519 QSWZ
POST SB MC10-35-170
POST SB MC10-35-207
- 90D 421B224 .. COVERPLATE,ASSY ABCE RF
SUPSDS 451700 FJKL
POST SB MC10-35-267 MPRT
UVXY
ATTACHING PARTS
100 YSQ1ZD020008APA .. SCREW FB90 M2X8 A4-70-10 PSVT F0110 RF
(P150002)
***
110 406358 .. CORD,INTERMEDIATE RADIO RF

- ITEM NOT ILLUSTRATED

Page 10037
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1
- 115 A1N0IR .. SLEEVE,ELECTRICAL F0331 RF
INSULATION
(P153484)
120 LHQ1UY020004U .. SCREW C M2X4 CU-ZN39PB2 F0110 RF
(P150984)
130 H1Q1ZD020014APA .. SCREW CS M2X14 STNLS STEEL F0110 RF
(P150322)
140 H2Q1ZD020018APA .. SCREW CLS M2X18 F0110 RF
(P149845)
- 150 448464 .. PLUG,ASSY RF
RPLD BY 437276
150A 437276 .. SEAL RF
RPLS 448464
POST SB MA-B-C-F10-35-87
POST SB MC-F10-35-111
160 DTS4020 . HOSE,ASSY S U 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160A DTS4021 . HOSE,ASSY FGYZ 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160B DTS4025 . HOSE,ASSY X 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160C DTS4029 . HOSE,ASSY W 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160D DTS4030 . HOSE,ASSY A T 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160E DTS4046 . HOSE,ASSY CHV 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160F DTS4047 . HOSE,ASSY B P 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160G DTS4048 . HOSE,ASSY DQ 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160H DTS4051 . HOSE,ASSY EMR 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160J DTS4063 . HOSE,ASSY L 1
SEE CMM 35-13-72 (F5341)
FOR DET

- ITEM NOT ILLUSTRATED

Page 10038
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1
- 160K DTS4102 . HOSE,ASSY K 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160L DTS4119 . HOSE,ASSY N 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160M DTS4142 . HOSE,ASSY J 1
SEE CMM 35-13-72 (F5341)
FOR DET
ATTACHING PARTS
170 419628 . BLOCK,LOCKING RF
180 023037 . NUT RF
***
190 R00490X190A50D5 .. O-RING 4.9X1.9 50D5 F6117 RF
(P154675)
- 200 080589 . LABEL, TSO TYPE 1 1
210 080223 . NAMEPLATE 1

- ITEM NOT ILLUSTRATED

Page 10039
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

THIS PAGE INTENTIONALLY LEFT BLANK

Page 10040
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

REGULATOR, CREW OXYGEN MASK

SHEET 1 OF 1
Figure 1A/GRAPHIC-35-13-63-991-801-B01

Page 10041
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1A
-1 MC10-02-121 REGULATOR, CREW OXYGEN A RF
MASK
- 1A MC10-02-155 REGULATOR, CREW OXYGEN B RF
MASK
- 1B MC10-02-169 REGULATOR, CREW OXYGEN C RF
MASK
- 1C MC10-02-170 REGULATOR, CREW OXYGEN D RF
MASK
- 1D MC10-04-01 REGULATOR, CREW OXYGEN NP E RF
MASK
- 1E MC10-04-02 REGULATOR, CREW OXYGEN NP F RF
MASK
- 1F MC10-04-07 REGULATOR, CREW OXYGEN NP G RF
MASK
- 1G MC10-04-21 REGULATOR, CREW OXYGEN H RF
MASK
- 1H MC10-04-22 REGULATOR, CREW OXYGEN J RF
MASK
- 1J MC10-04-27 REGULATOR, CREW OXYGEN K RF
MASK
- 1K MC10-04-77 REGULATOR, CREW OXYGEN L RF
MASK
- 1L MC10-04-101 REGULATOR, CREW OXYGEN M RF
MASK
- 1M MC10-04-102 REGULATOR, CREW OXYGEN N RF
MASK
- 1N MC10-04-105 REGULATOR, CREW OXYGEN P RF
MASK
- 1P MC10-04-107 REGULATOR, CREW OXYGEN NP Q RF
MASK
- 1Q MC10-04-109 REGULATOR, CREW OXYGEN R RF
MASK
- 1R MC10-04-110 REGULATOR, CREW OXYGEN S RF
MASK
- 1S MC10-04-111 REGULATOR, CREW OXYGEN T RF
MASK
- 1T MC10-04-112 REGULATOR, CREW OXYGEN U RF
MASK
- 1U MC10-04-115 REGULATOR, CREW OXYGEN V RF
MASK
- 1V MC10-04-116 REGULATOR, CREW OXYGEN W RF
MASK
- 1W MC10-04-121 REGULATOR, CREW OXYGEN X RF
MASK
- 1X MC10-04-122 REGULATOR, CREW OXYGEN Y RF
MASK
- 1Y MC10-04-127 REGULATOR, CREW OXYGEN Z RF
MASK
- ITEM NOT ILLUSTRATED

Page 10042
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1A
10 MXH15-2 . HARNESS,INFLATABLE ASSY NP E F G H 1
RPLD BY MXH15-22 JKMN
SEE CMM 35-13-71 (F5341) PQRS
FOR DET TUVW
XYZ
- 10A MXH16 . HARNESS,INFLATABLE,ASSY NP A 1
RPLD BY MXH16-20
SEE CMM 35-13-71 (F5341)
FOR DET
- 10B MXH20-1 . HARNESS,INFLATABLE,ASSY NP D 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 10C MXH21-1 . HARNESS,INFLATABLE,ASSY NP B C L 1
SUPSD BY MXH21-31
SEE CMM 35-13-71 (F5341)
FOR DET
- 10D MXH15-22 . HARNESS,INFLATABLE ASSY NP E F G H 1
RPLS MXH15-2 JKMN
SUPSD BY MXH15-32 PQRS
POST SB MA-B-C-F10-35-144 TUVW
POST SB MSE101-MC10-35-205 XYZ
POST SB MC-F10-35-142
POST SB MC10-04-35-192
SEE CMM 35-13-71 (F5341)
FOR DET
- 10E MXH16-20 . HARNESS,INFLATABLE,ASSY NP A 1
RPLS MXH16
SUPSD BY MXH16-30
POST SB MA-B-C-F10-35-144
SEE CMM 35-13-71 (F5341)
FOR DET
- 10F MXH15-32 . HARNESS,INFLATABLE ASSY EFGH 1
SUPSDS MXH15-22 JKMN
POST SB MCF10-MF20-35-255 PQRS
POST SB MA-B-C-F10-35-260 TUVW
SEE CMM 35-13-71 (F5341) XYZ
FOR DET
- 10G MXH21-31 . HARNESS,INFLATABLE,ASSY BCDL 1
SUPSDS MXH21-1
POST SB MC10-35-274
POST SB MA-B-C-F10-35-260
SEE CMM 35-13-71 (F5341)
FOR DET

- ITEM NOT ILLUSTRATED

Page 10043
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1A
- 10H MXH16-30 . HARNESS,INFLATABLE,ASSY A 1
SUPSDS MXH16-20
POST SB MA-B-C-F10-35-260
SEE CMM 35-13-71 (F5341)
FOR DET
ATTACHING PARTS
20 YSQ1ZD020006APA . SCREW FBS90 M2X6 A4-70 PSVT F0110 RF
(P150001)
***
30 MXM22 . MASK,ASSY EFGH 1
SEE CMM 35-13-71 (F5341) JKL
FOR DET
- 30A MXM23 . MASK,ASSY ABCD 1
SEE CMM 35-13-71 (F5341) MNPQ
FOR DET RSTU
V W X
Y Z
50 MXA1016 . MICROPHONE,ASSY AEHM 1
SEE CMM 35-13-71 (F5341) PSWX
FOR DET
- 50A MXA1031 . MICROPHONE,ASSY FJNY 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50B MXA1042 . MICROPHONE,ASSY B D G 1
SEE CMM 35-13-71 (F5341) KLQU
FOR DET V Z
- 50C MXA1045 . MICROPHONE,ASSY R T 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50D MXA1050 . MICROPHONE,ASSY C 1
SEE CMM 35-13-71 (F5341)
FOR DET
60 RMC1008 . REGULATOR,ASSY NP E F G H 1
RPLD BY RMC2008 JKLM
SEE CMM 35-13-70 (F5341) NQRU
FOR DET XYZ
- 60A RMC1008-1 . REGULATOR,ASSY NP P S V 1
RPLD BY RMC2008-1
SEE CMM 35-13-70 (F5341)
FOR DET
- 60B RMC1008-2 . REGULATOR,ASSY NP T W 1
RPLD BY RMC2008-2
SEE CMM 35-13-70 (F5341)
FOR DET

- ITEM NOT ILLUSTRATED

Page 10044
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1A
- 60C RMC1018 . REGULATOR,ASSY NP D 1
RPLD BY RMC2018
SEE CMM 35-13-70 (F5341)
FOR DET
- 60D RMC1018-2 . REGULATOR,ASSY NP A B C 1
RPLD BY RMC2018-2
SEE CMM 35-13-70 (F5341)
FOR DET
- 60E RMC2008 . REGULATOR,ASSY EFGH 1
RPLS RMC1008 JKLM
POST SB MC10-35-171 NQRU
POST SB MC10-MF10-35-158 XYZ
SEE CMM 35-13-74 (F5341)
FOR DET
- 60F RMC2008-1 . REGULATOR,ASSY PSV 1
RPLS RMC1008-1
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
- 60G RMC2008-2 . REGULATOR,ASSY TW 1
RPLS RMC1008-2
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
- 60H RMC2018 . REGULATOR,ASSY D 1
RPLS RMC1018
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
- 60J RMC2018-2 . REGULATOR,ASSY ABC 1
RPLS RMC1018-2
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
ATTACHING PARTS
- 70 416611 . LOCK, MASK NP RF
RPLD BY 449039
70A 449039 . LOCK,MASK ASSY RF
RPLS 416611
POST SB MA-B-C-F10-35-89
- 80 LJQ1ZD030005UPA . SCREW, CL M3X5 NP RF
PRE SB MA-B-C-F10-35-89
***
90 407527 .. COVERPLATE ASSY EFGH RF
SUPSD BY 451709 JKLM
NQRU
XYZ

- ITEM NOT ILLUSTRATED

Page 10045
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1A
- 90A 408519 .. COVERPLATE,ASSY DPSV RF
SUPSD BY 451699
- 90B 441067 .. COVERPLATE,ASSY ABC RF
SUPSD BY 451700
POST SB MF20-35-20
- 90C 444289 .. COVERPLATE ASSY TW RF
SUPSD BY 451711
- 90D 451699 .. COVERPLATE,ASSY DPSV RF
SUPSDS 408519
POST SB MC10-35-171
- 90E 451700 .. COVERPLATE,ASSY ABC RF
SUPSD BY 421B224
SUPSDS 441067
POST SB MC10-35-171
- 90F 451709 .. COVERPLATE,ASSY EFGH RF
SUPSDS 407527 JKLM
POST SB MC10-35-171 NQRU
POST SB MC10-MF10-35-158 XYZ
- 90G 451711 .. COVERPLATE,ASSY TW RF
SUPSD BY 421B225
SUPSDS 444289
POST SB MC10-35-171
- 90H 421B224 .. COVERPLATE,ASSY ABC RF
SUPSDS 451700
POST SB MC10-02-35-269
POST SB MC10-35-267
- 90J 421B225 .. COVERPLATE,ASSY TW RF
SUPSDS 451711
POST SB MC10-35-267
ATTACHING PARTS
100 YSQ1ZD020008APA .. SCREW FB90 M2X8 A4-70-10 PSVT F0110 RF
(P150002)
***
110 406358 .. CORD,INTERMEDIATE RADIO RF
- 115 A1N0IR .. SLEEVE,ELECTRICAL F0331 RF
INSULATION
(P153484)
120 LHQ1UY020004U .. SCREW C M2X4 CU-ZN39PB2 F0110 RF
(P150984)
130 H1Q1ZD020014APA .. SCREW CS M2X14 STNLS STEEL F0110 RF
(P150322)
140 H2Q1ZD020018APA .. SCREW CLS M2X18 F0110 RF
(P149845)
- 150 448464 .. PLUG,ASSY RF
RPLD BY 437276

- ITEM NOT ILLUSTRATED

Page 10046
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1A
150A 437276 .. SEAL RF
RPLS 448464
POST SB MA-B-C-F10-35-87
POST SB MC-F10-35-111
160 DTS4008 . HOSE,ASSY EFGH 1
SEE CMM 35-13-72 (F5341) JKLM
FOR DET NQRX
Y Z
- 160A DTS4024 . HOSE,ASSY C 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160B DTS4032 . HOSE,ASSY D 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160C DTS4035 . HOSE,ASSY PUV 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160D DTS4051 . HOSE,ASSY B 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160E DTS4062 . HOSE,ASSY S 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160F DTS4063 . HOSE,ASSY A 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160G DTS4074 . HOSE,ASSY T 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160H DTS4117 . HOSE,ASSY W 1
SEE CMM 35-13-72 (F5341)
FOR DET
ATTACHING PARTS
170 419628 . BLOCK,LOCKING RF
180 023037 . NUT RF
***
190 R00490X190A50D5 .. O-RING 4.9X1.9 50D5 F6117 RF
(P154675)
200 080589 . LABEL, TSO TYPE 1 1
210 080223 . NAMEPLATE 1

- ITEM NOT ILLUSTRATED

Page 10047
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

THIS PAGE INTENTIONALLY LEFT BLANK

Page 10048
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

REGULATOR, CREW OXYGEN MASK

SHEET 1 OF 1
Figure 1B/GRAPHIC-35-13-63-991-801-C01

Page 10049
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1B
-1 MC10-04-157 REGULATOR, CREW OXYGEN A RF
MASK
- 1A MC10-04-159 REGULATOR, CREW OXYGEN B RF
MASK
- 1B MC10-04-177 REGULATOR, CREW OXYGEN C RF
MASK
- 1C MC10-05-04 REGULATOR, CREW OXYGEN D RF
MASK
- 1D MC10-05-100 REGULATOR, CREW OXYGEN NP E RF
MASK
- 1E MC10-05-101 REGULATOR, CREW OXYGEN F RF
MASK
- 1F MC10-05-104 REGULATOR, CREW OXYGEN G RF
MASK
- 1G MC10-05-124 REGULATOR, CREW OXYGEN H RF
MASK
- 1H MC10-05-152 REGULATOR, CREW OXYGEN J RF
MASK
- 1J MC10-06-00 REGULATOR, CREW OXYGEN K RF
MASK
- 1K MC10-06-01 REGULATOR, CREW OXYGEN L RF
MASK
- 1L MC10-06-03 REGULATOR, CREW OXYGEN M RF
MASK
- 1M MC10-06-20 REGULATOR, CREW OXYGEN N RF
MASK
- 1N MC10-06-21 REGULATOR, CREW OXYGEN P RF
MASK
- 1P MC10-06-23 REGULATOR, CREW OXYGEN Q RF
MASK
- 1Q MC10-06-100 REGULATOR, CREW OXYGEN R RF
MASK
- 1R MC10-06-101 REGULATOR, CREW OXYGEN S RF
MASK
- 1S MC10-06-102 REGULATOR, CREW OXYGEN T RF
MASK
- 1T MC10-06-104 REGULATOR, CREW OXYGEN U RF
MASK
- 1U MC10-06-105 REGULATOR, CREW OXYGEN V RF
MASK
- 1V MC10-06-106 REGULATOR, CREW OXYGEN W RF
MASK
- 1W MC10-06-120 REGULATOR, CREW OXYGEN X RF
MASK
- 1X MC10-06-121 REGULATOR, CREW OXYGEN Y RF
MASK
- 1Y MC10-06-124 REGULATOR, CREW OXYGEN Z RF
MASK
- ITEM NOT ILLUSTRATED

Page 10050
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1B
10 MXH15-2 . HARNESS,INFLATABLE ASSY NP D G H 1
RPLD BY MXH15-22 KLMN
SEE CMM 35-13-71 (F5341) PQRS
FOR DET TUVX
Y Z
- 10A MXH16 . HARNESS,INFLATABLE,ASSY NP E F 1
RPLD BY MXH16-20
SEE CMM 35-13-71 (F5341)
FOR DET
- 10B MXH19 . HARNESS,ASSY INFLATABLE NP W 1
RPLD BY MXH19-20
SEE CMM 35-13-71 (F5341)
FOR DET
- 10C MXH21-1 . HARNESS,INFLATABLE,ASSY NP A B C J 1
SUPSD BY MXH21-31
SEE CMM 35-13-71 (F5341)
FOR DET
10D MXH15-22 . HARNESS,INFLATABLE ASSY NP D G H 1
RPLS MXH15-2 KLMN
SUPSD BY MXH15-32 PQRS
POST SB MA-B-C-F10-35-144 TUVX
SEE CMM 35-13-71 (F5341) Y Z
FOR DET
- 10E MXH16-20 . HARNESS,INFLATABLE,ASSY NP E F 1
RPLS MXH16
SUPSD BY MXH16-30
POST SB MA-B-C-F10-35-144
SEE CMM 35-13-71 (F5341)
FOR DET
- 10F MXH19-20 . HARNESS,ASSY INFLATABLE W 1
RPLS MXH19
SUPSD BY MXH19-30
POST SB MA-B-C-F10-35-144
SEE CMM 35-13-71 (F5341)
FOR DET
- 10G MXH21-31 . HARNESS,INFLATABLE,ASSY ABCJ 1
SUPSDS MXH21-1
POST SB MC10-35-274
POST SB MA-B-C-F10-35-260
SEE CMM 35-13-71 (F5341)
FOR DET
- 10H MXH15-32 . HARNESS,INFLATABLE ASSY D G H 1
SUPSDS MXH15-22 KLMN
POST SB MA-B-C-F10-35-260 PQRS
SEE CMM 35-13-71 (F5341) TUVX
FOR DET Y Z

- ITEM NOT ILLUSTRATED

Page 10051
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1B
- 10J MXH19-30 . HARNESS,ASSY INFLATABLE W 1
SUPSDS MXH19-20
POST SB MA-B-C-F10-35-260
- 10K MXH16-30 . HARNESS,INFLATABLE,ASSY E F 1
SUPSDS MXH16-20
POST SB MA-B-C-F10-35-260
SEE CMM 35-13-71 (F5341)
FOR DET
ATTACHING PARTS
20 YSQ1ZD020006APA . SCREW FBS90 M2X6 A4-70 PSVT F0110 RF
(P150001)
***
30 MXM22 . MASK,ASSY DKLM 1
SEE CMM 35-13-71 (F5341) NPQ
FOR DET
- 30A MXM23 . MASK,ASSY ABCE 1
SEE CMM 35-13-71 (F5341) FGHJ
FOR DET RSTU
V W X
Y Z
50 MXA1006 . MICROPHONE,ASSY NP K L N R 1
RPLD BY MXA1051 STUV
SEE CMM 35-13-71 (F5341) XYZ
FOR DET
- 50A MXA1012 . MICROPHONE,ASSY E 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50B MXA1016 . MICROPHONE,ASSY J 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50C MXA1018 . MICROPHONE,ASSY DGH 1
SUPSD BY MXA1016
SEE CMM 35-13-71 (F5341)
FOR DET
- 50D MXA1042 . MICROPHONE,ASSY ACF 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50E MXA1044 . MICROPHONE,ASSY W 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50F MXA1045 . MICROPHONE,ASSY B 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50G MXA1046 . MICROPHONE,ASSY MQ 1
SEE CMM 35-13-71 (F5341)
FOR DET

- ITEM NOT ILLUSTRATED

Page 10052
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1B
- 50H MXA1051 . MICROPHONE,ASSY KLNP 1
RPLS MXA1006 RSTU
SEE CMM 35-13-71 (F5341) VXYZ
FOR DET
- 50J MXA1016 . MICROPHONE,ASSY DGH 1
SUPSDS MXA1018
POST SB MC10-35-263
SEE CMM 35-13-71 (F5341)
FOR DET
60 RMC1006 . REGULATOR ASSY NP D E F G 1
RPLD BY RMC2006 H J
SEE CMM 35-13-70 (F5341)
FOR DET
- 60A RMC1008 . REGULATOR,ASSY NP A B C 1
RPLD BY RMC2008
SEE CMM 35-13-70 (F5341)
FOR DET
- 60B RMC1018 . REGULATOR,ASSY NP K N R U 1
RPLD BY RMC2018 X Z
SEE CMM 35-13-70 (F5341)
FOR DET
- 60C RMC1018-2 . REGULATOR,ASSY NP L M P 1
RPLD BY RMC2018-2 QSTV
SEE CMM 35-13-70 (F5341) WY
FOR DET
- 60D RMC1106 . REGULATOR,ASSY E 1
RPLD BY RMC2106
POST SB MC-F10-35-123
SEE CMM 35-13-70 (F5341)
FOR DET
- 60E RMC2006 . REGULATOR,ASSY DEFG 1
RPLS RMC1006 H J
PRE SB MC-F10-35-123
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
- 60F RMC2008 . REGULATOR,ASSY ABC 1
RPLS RMC1008
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
- 60G RMC2018 . REGULATOR,ASSY KNRU 1
RPLS RMC1018 X Z
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET

- ITEM NOT ILLUSTRATED

Page 10053
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1B
- 60H RMC2018-2 . REGULATOR,ASSY L M P 1
RPLS RMC1018-2 QSTV
POST SB MC10-35-171 WY
SEE CMM 35-13-74 (F5341)
FOR DET
- 60J RMC2106 . REGULATOR,ASSY E 1
RPLS RMC1106
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
ATTACHING PARTS
- 70 416611 . LOCK, MASK NP RF
RPLD BY 449039
70A 449039 . LOCK,MASK ASSY RF
RPLS 416611
POST SB MA-B-C-F10-35-89
- 80 LJQ1ZD030005UPA . SCREW, CL M3X5 NP RF
PRE SB MA-B-C-F10-35-89
***
90 407527 .. COVERPLATE ASSY ABC RF
SUPSD BY 451709
- 90A 408519 .. COVERPLATE,ASSY DEFG RF
SUPSD BY 451699 HJKN
RUXZ
- 90B 441067 .. COVERPLATE,ASSY L M P RF
SUPSD BY 451700 QSTV
WY
- 90D 450056 .. COVERPLATE,ASSY E RF
RPLD BY 451712
POST SB MC-F10-35-123
- 90E 451699 .. COVERPLATE,ASSY DEFG RF
SUPSDS 408519 HJKN
POST SB MC10-35-171 RUXZ
- 90F 451700 .. COVERPLATE,ASSY L M P RF
SUPSD BY 421B224 QSTV
SUPSDS 441067 WY
POST SB MC10-35-171
- 90G 451709 .. COVERPLATE,ASSY ABC RF
SUPSDS 407527
POST SB MC10-35-171
- 90H 451712 .. COVERPLATE,ASSY E RF
RPLS 450056
POST SB MC10-35-171
- 90J 421B224 .. COVERPLATE,ASSY L M P RF
SUPSDS 451700 QSTV
POST SB MC10-35-267 WY

- ITEM NOT ILLUSTRATED

Page 10054
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1B
ATTACHING PARTS
100 YSQ1ZD020008APA .. SCREW FB90 M2X8 A4-70-10 PSVT F0110 RF
(P150002)
***
110 406358 .. CORD,INTERMEDIATE RADIO RF
- 115 A1N0IR .. SLEEVE,ELECTRICAL F0331 RF
INSULATION
(P153484)
120 LHQ1UY020004U .. SCREW C M2X4 CU-ZN39PB2 F0110 RF
(P150984)
130 H1Q1ZD020014APA .. SCREW CS M2X14 STNLS STEEL F0110 RF
(P150322)
140 H2Q1ZD020018APA .. SCREW CLS M2X18 F0110 RF
(P149845)
- 150 448464 .. PLUG,ASSY RF
RPLD BY 437276
150A 437276 .. SEAL RF
RPLS 448464
POST SB MA-B-C-F10-35-87
POST SB MC-F10-35-111
160 DTS4008 . HOSE,ASSY ABC 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160A DTS4010 . HOSE,ASSY KNRX 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160B DTS4012 . HOSE,ASSY DGH 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160C DTS4021 . HOSE,ASSY LMPQ 1
SEE CMM 35-13-72 (F5341) S Y
FOR DET
- 160D DTS4029 . HOSE,ASSY F J 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160E DTS4054 . HOSE,ASSY T 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160F DTS4069 . HOSE,ASSY E 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160G DTS4071 . HOSE,ASSY U Z 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160H DTS4103 . HOSE,ASSY V 1
SEE CMM 35-13-72 (F5341)
FOR DET

- ITEM NOT ILLUSTRATED

Page 10055
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1B
- 160J DTS4122 . HOSE,ASSY W 1
SEE CMM 35-13-72 (F5341)
FOR DET
ATTACHING PARTS
170 419628 . BLOCK,LOCKING RF
180 023037 . NUT RF
***
190 R00490X190A50D5 .. O-RING 4.9X1.9 50D5 F6117 RF
(P154675)
200 080589 . LABEL, TSO TYPE 1 1
210 080223 . NAMEPLATE 1

- ITEM NOT ILLUSTRATED

Page 10056
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

REGULATOR, CREW OXYGEN MASK

SHEET 1 OF 1
Figure 1C/GRAPHIC-35-13-63-991-801-D01

Page 10057
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1C
-1 MC10-06-125 REGULATOR, CREW OXYGEN A RF
MASK
- 1A MC10-06-126 REGULATOR, CREW OXYGEN B RF
MASK
- 1B MC10-08-00 REGULATOR, CREW OXYGEN C RF
MASK
- 1C MC10-08-01 REGULATOR, CREW OXYGEN D RF
MASK
- 1D MC10-08-02 REGULATOR, CREW OXYGEN E RF
MASK
- 1E MC10-08-05 REGULATOR, CREW OXYGEN NP F RF
MASK
- 1F MC10-08-09 REGULATOR, CREW OXYGEN G RF
MASK
- 1G MC10-08-13 REGULATOR, CREW OXYGEN H RF
MASK
- 1H MC10-08-25 REGULATOR, CREW OXYGEN J RF
MASK
- 1J MC10-08-100 REGULATOR, CREW OXYGEN K RF
MASK
- 1K MC10-08-102 REGULATOR, CREW OXYGEN L RF
MASK
- 1L MC10-08-103 REGULATOR, CREW OXYGEN NP M RF
MASK
- 1M MC10-08-104 REGULATOR, CREW OXYGEN N RF
MASK
- 1N MC10-08-106 REGULATOR, CREW OXYGEN P RF
MASK
- 1P MC10-08-107 REGULATOR, CREW OXYGEN NP Q RF
MASK
- 1Q MC10-08-108 REGULATOR, CREW OXYGEN R RF
MASK
- 1R MC10-08-109 REGULATOR, CREW OXYGEN NP S RF
MASK
- 1S MC10-08-110 REGULATOR, CREW OXYGEN T RF
MASK
- 1T MC10-08-111 REGULATOR, CREW OXYGEN U RF
MASK
- 1U MC10-08-112 REGULATOR, CREW OXYGEN V RF
MASK
- 1V MC10-08-120 REGULATOR, CREW OXYGEN W RF
MASK
- 1W MC10-08-123 REGULATOR, CREW OXYGEN NP X RF
MASK
- 1X MC10-08-124 REGULATOR, CREW OXYGEN Y RF
MASK
- 1Y MC10-08-126 REGULATOR, CREW OXYGEN Z RF
MASK
- ITEM NOT ILLUSTRATED

Page 10058
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1C
10 MXH14-1 . HARNESS,INFLATABLE,ASSY NP P Z 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 10A MXH15-2 . HARNESS,INFLATABLE ASSY NP A B C D 1
SEE CMM 35-13-71 (F5341) EFGH
FOR DET JKLM
NQRS
TUVW
X Y
10B MXH14-21 . HARNESS,INFLATABLE,ASSY NP P Z 1
SUPSD BY MXH14-31
POST SB MA-B-C-F10-35-144
SEE CMM 35-13-71 (F5341)
FOR DET
- 10C MXH15-22 . HARNESS,INFLATABLE ASSY NP A B C D 1
SUPSD BY MXH15-32 EFGH
POST SB MA-B-C-F10-35-144 JKLM
POST SB MC10-06-35-208 NQRS
POST SB MC-F10-35-142 TUVW
SEE CMM 35-13-71 (F5341) X Y
FOR DET
- 10D MXH15-32 . HARNESS,INFLATABLE ASSY ABCD 1
SUPSDS MXH15-22 EFGH
POST SB MA-B-C-F10-35-260 JKNRT
SEE CMM 35-13-71 (F5341) UVWY
FOR DET
- 10E MXH14-31 . HARNESS,INFLATABLE,ASSY P Z 1
SUPSDS MXH14-21
POST SB MA-B-C-F10-35-260
ATTACHING PARTS
20 YSQ1ZD020006APA . SCREW FBS90 M2X6 A4-70 PSVT F0110 RF
(P150001)
***
30 MXM22 . MASK,ASSY CDEF 1
SEE CMM 35-13-71 (F5341) GHJ
FOR DET
- 30A MXM23 . MASK,ASSY ABKL 1
SEE CMM 35-13-71 (F5341) MNPQ
FOR DET RSTU
V W X
Y Z
50 MXA1006 . MICROPHONE,ASSY NP T 1
RPLD BY MXA1051
SEE CMM 35-13-71 (F5341)
FOR DET

- ITEM NOT ILLUSTRATED

Page 10059
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1C
- 50A MXA1016 . MICROPHONE,ASSY DGM 1
SEE CMM 35-13-71 (F5341) QSX
FOR DET
- 50B MXA1018 . MICROPHONE,ASSY CKW 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50C MXA1031 . MICROPHONE,ASSY R 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50D MXA1042 . MICROPHONE,ASSY FHJNP 1
SEE CMM 35-13-71 (F5341) UVYZ
FOR DET
- 50E MXA1044 . MICROPHONE,ASSY E L 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50F MXA1051 . MICROPHONE,ASSY B T 1
RPLS MXA1006
SEE CMM 35-13-71 (F5341)
FOR DET
- 50G MXA1054 . MICROPHONE,ASSY A 1
SEE CMM 35-13-71 (F5341)
FOR DET
60 RMC1007 . REGULATOR,ASSY NP C K W 1
RPLD BY RMC2007
SEE CMM 35-13-70 (F5341)
FOR DET
- 60A RMC1007-1 . REGULATOR,ASSY NP D E G H 1
RPLD BY RMC2007-1 LMNP
SEE CMM 35-13-70 (F5341) QRSU
FOR DET VXYZ
- 60B RMC1007-3 . REGULATOR,ASSY NP F J 1
RPLD BY RMC2007-3
SEE CMM 35-13-70 (F5341)
FOR DET
- 60C RMC1007-5 . REGULATOR,ASSY NP T 1
RPLD BY RMC2007-5
SEE CMM 35-13-70 (F5341)
FOR DET
- 60D RMC1018-2 . REGULATOR,ASSY NP A B 1
RPLD BY RMC2018-2
SEE CMM 35-13-70 (F5341)
FOR DET
- 60E RMC2007 . REGULATOR,ASSY CKW 1
RPLS RMC1007
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET

- ITEM NOT ILLUSTRATED

Page 10060
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1C
- 60F RMC2007-1 . REGULATOR,ASSY DEGH 1
RPLS RMC1007-1 LMNP
POST SB MC10-35-171 QRSU
POST SB MC10-MF10-35-158 VXYZ
SEE CMM 35-13-74 (F5341)
FOR DET
- 60G RMC2007-3 . REGULATOR,ASSY F J 1
RPLS RMC1007-3
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
- 60H RMC2007-5 . REGULATOR,ASSY T 1
RPLS RMC1007-5
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
- 60J RMC2018-2 . REGULATOR,ASSY A B 1
RPLS RMC1018-2
POST SB MC10-35-171
POST SB MC10-06-35-208
SEE CMM 35-13-74 (F5341)
FOR DET
ATTACHING PARTS
- 70 416611 . LOCK, MASK NP RF
RPLD BY 449039
- 70A 449039 . LOCK,MASK ASSY RF
RPLS 416611
POST SB MA-B-C-F10-35-89
- 80 LJQ1ZD030005UPA . SCREW, CL M3X5 NP RF
PRE SB MA-B-C-F10-35-89
***
90 441067 .. COVERPLATE,ASSY A B RF
SUPSD BY 451700
- 90A 448239 .. COVERPLATE,ASSY CDEG RF
SUPSD BY 451701 HKLM
NPQR
SUVW
XYZ
- 90B 448240 .. COVERPLATE,ASSY T RF
SUPSD BY 451704
- 90C 448241 .. COVERPLATE,ASSY F J RF
SUPSD BY 451702
- 90D 451700 .. COVERPLATE,ASSY A B RF
SUPSD BY 421B224
SUPSDS 441067
POST SB MC10-35-171
POST SB MC10-06-35-208

- ITEM NOT ILLUSTRATED

Page 10061
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1C
- 90E 451701 .. COVERPLATE,ASSY CDEG RF
SUPSDS 448239 HKLM
POST SB MC10-35-171 NPQR
POST SB MC10-MF10-35-158 SUVW
XYZ
- 90F 451702 .. COVERPLATE,ASSY F J RF
SUPSDS 448241
POST SB MC10-35-171
- 90G 451704 .. COVERPLATE,ASSY T RF
SUPSD BY 421B161
SUPSDS 448240
POST SB MC10-35-171
- 90H 421B161 .. COVERPLATE,ASSY T RF
SUPSDS 451704
POST SB MC10-35-267
- 90J 421B224 .. COVERPLATE,ASSY A B RF
SUPSDS 451700
POST SB MC10-35-267
ATTACHING PARTS
100 YSQ1ZD020008APA .. SCREW FB90 M2X8 A4-70-10 PSVT F0110 RF
(P150002)
***
110 406358 .. CORD,INTERMEDIATE RADIO RF
- 115 A1N0IR .. SLEEVE,ELECTRICAL F0331 RF
INSULATION
(P153484)
120 LHQ1UY020004U .. SCREW C M2X4 CU-ZN39PB2 F0110 RF
(P150984)
130 H1Q1ZD020014APA .. SCREW CS M2X14 STNLS STEEL F0110 RF
(P150322)
140 H2Q1ZD020018APA .. SCREW CLS M2X18 F0110 RF
(P149845)
- 150 448464 .. PLUG,ASSY RF
RPLD BY 437276
150A 437276 .. SEAL RF
RPLS 448464
POST SB MA-B-C-F10-35-87
POST SB MC-F10-35-111
160 DTS4001 . HOSE,ASSY P Z 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160A DTS4005 . HOSE,ASSY E L 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160B DTS4008 . HOSE,ASSY F J 1
SEE CMM 35-13-72 (F5341)
FOR DET

- ITEM NOT ILLUSTRATED

Page 10062
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1C
- 160C DTS4012 . HOSE,ASSY CKW 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160D DTS4021 . HOSE,ASSY A H 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160E DTS4025 . HOSE,ASSY T 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160F DTS4029 . HOSE,ASSY N Y 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160G DTS4040 . HOSE,ASSY NP D M 1
OPT TO DTS4032 (F5341)
- 160H DTS4032 . HOSE,ASSY DGM 1
SEE CMM 35-13-72 (F5341) SVX
FOR DET
- 160J DTS4035 . HOSE,ASSY Q 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160K DTS4065 . HOSE,ASSY RU 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160L DTS4070 . HOSE, ASSY B 1
SEE CMM 35-13-72 (F5341)
FOR DET
ATTACHING PARTS
170 419628 . BLOCK,LOCKING RF
180 023037 . NUT RF
***
190 R00490X190A50D5 .. O-RING 4.9X1.9 50D5 F6117 RF
(P154675)
200 080589 . LABEL, TSO TYPE 1 A B 1
- 200A 080590 . LABEL, TSO TYPE 2 CDEF 1
GHJK
LMNP
QRST
UVW
XYZ
210 080223 . NAMEPLATE 1
220 080573 . PLATE,FUNCTIONAL TEST DELM 1
NSXY

- ITEM NOT ILLUSTRATED

Page 10063
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

THIS PAGE INTENTIONALLY LEFT BLANK

Page 10064
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

REGULATOR, CREW OXYGEN MASK

SHEET 1 OF 1
Figure 1D/GRAPHIC-35-13-63-991-801-E01

Page 10065
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1D
-1 MC10-08-127 REGULATOR, CREW OXYGEN A RF
MASK
- 1A MC10-08-128 REGULATOR, CREW OXYGEN B RF
MASK
- 1B MC10-08-209 REGULATOR, CREW OXYGEN C RF
MASK
- 1C MC10-09-00 REGULATOR, CREW OXYGEN D RF
MASK
- 1D MC10-09-01 REGULATOR, CREW OXYGEN NP E RF
MASK
- 1E MC10-10-100 REGULATOR, CREW OXYGEN F RF
MASK
- 1F MC10-10-101 REGULATOR, CREW OXYGEN G RF
MASK
- 1G MC10-10-102 REGULATOR, CREW OXYGEN H RF
MASK
- 1H MC10-10-103 REGULATOR, CREW OXYGEN J RF
MASK
- 1J MC10-10-104 REGULATOR, CREW OXYGEN K RF
MASK
- 1K MC10-12-100 REGULATOR, CREW OXYGEN L RF
MASK
- 1L MC10-12-101 REGULATOR, CREW OXYGEN M RF
MASK
- 1M MC10-12-150 REGULATOR, CREW OXYGEN N RF
MASK
- 1N MC10-12-151 REGULATOR, CREW OXYGEN P RF
MASK
- 1P MC10-13-02 REGULATOR, CREW OXYGEN Q RF
MASK
- 1Q MC10-13-03 REGULATOR, CREW OXYGEN R RF
MASK
- 1R MC10-13-04 REGULATOR, CREW OXYGEN S RF
MASK
- 1S MC10-13-05 REGULATOR, CREW OXYGEN T RF
MASK
- 1T MC10-13-102 REGULATOR, CREW OXYGEN U RF
MASK
- 1U MC10-13-103 REGULATOR, CREW OXYGEN V RF
MASK
- 1V MC10-13-104 REGULATOR, CREW OXYGEN W RF
MASK
- 1W MC10-13-114 REGULATOR, CREW OXYGEN X RF
MASK
- 1X MC10-13-150 REGULATOR, CREW OXYGEN Y RF
MASK
- 1Y MC10-14-00 REGULATOR, CREW OXYGEN Z RF
MASK
- ITEM NOT ILLUSTRATED

Page 10066
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1D
10 MXH15-2 . HARNESS,INFLATABLE ASSY NP A B C D 1
RPLD BY MXH15-22 EFGH
SEE CMM 35-13-71 (F5341) JKLM
FOR DET QRST
UVW
X Z
- 10A MXH20-1 . HARNESS,INFLATABLE,ASSY NP N P Y 1
SUPSD BY MXH21-31
SEE CMM 35-13-71 (F5341)
FOR DET
10B MXH61 . HARNESS,INFLATABLE,ASSY NP Y 1
POST SB MC10-13-150-133
SEE CMM 35-13-71 (F5341)
FOR DET
- 10C MXH15-22 . HARNESS,INFLATABLE ASSY NP A B C D 1
RPLS MXH15-2 EFGH
SUPSD BY MXH15-32 JKLM
POST SB MC10-35-164 QRST
POST SB MA-B-C-F10-35-144 UVW
POST SB MC10-MF10-35-141 X Z
SEE CMM 35-13-71 (F5341)
FOR DET
- 10D MXH15-32 . HARNESS,INFLATABLE ASSY ABCD 1
SUPSDS MXH15-22 EFGH
POST SB MA-B-C-F10-35-260 JKLM
POST SB MACF10-MLCD20- QRST
35-258 VWXZ
POST SB MCF10-MRA-35-254
SEE CMM 35-13-71 (F5341)
FOR DET
- 10E MXH21-31 . HARNESS,INFLATABLE,ASSY NPY 1
SUPSD BY MXH61-30
SUPSDS MXH20-1
POST SB MC10-35-274
POST SB MACF10-MLCD20-
35-258
SEE CMM 35-13-71 (F5341)
FOR DET
- 10F MXH61-30 . HARNESS,INFLATABLE,ASSY P 1
SUPSDS MXH21-31
POST SB MC10-12-151-35-132
ATTACHING PARTS
20 YSQ1ZD020006APA . SCREW FBS90 M2X6 A4-70 PSVT F0110 RF
(P150001)
***
25 050038 . CLIP C 2

- ITEM NOT ILLUSTRATED

Page 10067
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1D
30 MXM22 . MASK,ASSY DEQR 1
SEE CMM 35-13-71 (F5341) STZ
FOR DET
- 30A MXM23 . MASK,ASSY ABCF 1
SEE CMM 35-13-71 (F5341) GHJKL
FOR DET MNPU
VWXY
50 MXA1006 . MICROPHONE,ASSY NP H Q U 1
RPLD BY MXA1051 WZ
SEE CMM 35-13-71 (F5341)
FOR DET
- 50A MXA1016 . MICROPHONE,ASSY A C 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50B MXA1021 . MICROPHONE,ASSY F G 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50C MXA1031 . MICROPHONE,ASSY B 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50D MXA1033 . MICROPHONE,ASSY D E 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50E MXA1036 . MICROPHONE,ASSY J 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50F MXA1038 . MICROPHONE,ASSY K 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50G MXA1041 . MICROPHONE,ASSY T 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50H MXA1042 . MICROPHONE,ASSY LMNP 1
SEE CMM 35-13-71 (F5341) R V
FOR DET
- 50J MXA1051 . MICROPHONE,ASSY HQSU 1
RPLS MXA1006 WXYZ
SEE CMM 35-13-71 (F5341)
FOR DET
60 RMC1002 . REGULATOR,ASSY NP D E 1
RPLD BY RMC2002
SEE CMM 35-13-70 (F5341)
FOR DET
- 60A RMC1007-1 . REGULATOR,ASSY NP A B C 1
RPLD BY RMC2007-1
SEE CMM 35-13-70 (F5341)
FOR DET

- ITEM NOT ILLUSTRATED

Page 10068
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1D
- 60B RMC1019 . REGULATOR,ASSY NP Q S T U 1
RPLD BY RMC2019 X Y
SEE CMM 35-13-70 (F5341)
FOR DET
- 60C RMC1019-1 . REGULATOR,ASSY NP R V 1
RPLD BY RMC2019-1
SEE CMM 35-13-70 (F5341)
FOR DET
- 60D RMC1019-2 . REGULATOR,ASSY NP W 1
RPLD BY RMC2019-2
SEE CMM 35-13-70 (F5341)
FOR DET
- 60E RMC1020 . REGULATOR,ASSY NP Z 1
RPLD BY RMC2020
SEE CMM 35-13-70 (F5341)
FOR DET
- 60F RMC1022-4 . REGULATOR,ASSY NP F G H 1
RPLD BY RMC2022-4 J K
SEE CMM 35-13-70 (F5341)
FOR DET
- 60G RMC1022-5 . REGULATOR,ASSY NP L M N P 1
RPLD BY RMC2022-5
SEE CMM 35-13-70 (F5341)
FOR DET
- 60H RMC2019-1 . REGULATOR,ASSY R V 1
RPLS RMC1019-1
POST SB MC10-35-169
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
- 60J RMC2022-5 . REGULATOR,ASSY LMNP 1
RPLS RMC1022-5
POST SB MC10-35-170
SEE CMM 35-13-74 (F5341)
FOR DET
- 60K RMC2022-4 . REGULATOR,ASSY F G H 1
RPLS RMC1022-4 J K
POST SB MC10-35-170
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
- 60L RMC2002 . REGULATOR,ASSY D E 1
RPLS RMC1002
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET

- ITEM NOT ILLUSTRATED

Page 10069
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1D
- 60M RMC2007-1 . REGULATOR,ASSY ABC 1
RPLS RMC1007-1
POST SB MC10-35-171
POST SB MC10-MF10-35-158
SEE CMM 35-13-74 (F5341)
FOR DET
- 60N RMC2019 . REGULATOR,ASSY QSTU 1
RPLS RMC1019 X Y
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
- 60P RMC2019-2 . REGULATOR,ASSY W 1
RPLS RMC1019-2
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
- 60Q RMC2020 . REGULATOR,ASSY Z 1
RPLS RMC1020
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
ATTACHING PARTS
- 70 416611 . LOCK, MASK NP RF
RPLD BY 449039
70A 449039 . LOCK,MASK ASSY RF
RPLS 416611
POST SB MA-B-C-F10-35-89
- 80 LJQ1ZD030005UPA . SCREW, CL M3X5 NP RF
PRE SB MA-B-C-F10-35-89
***
90 408519 .. COVERPLATE,ASSY D E RF
SUPSD BY 451699
- 90A 448239 .. COVERPLATE,ASSY ABCF RF
SUPSD BY 451701 GHJKL
MNPQ
RSTU
VXYZ
- 90B 448240 .. COVERPLATE,ASSY W RF
SUPSD BY 451704
- 90C 451701 .. COVERPLATE,ASSY ABCF RF
SUPSDS 448239 GHJKL
POST SB MC10-35-169 MNPQ
POST SB MC10-35-170 RSTU
POST SB MC10-35-171 VXYZ
POST SB MC10-MF10-35-158

- ITEM NOT ILLUSTRATED

Page 10070
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1D
- 90D 451699 .. COVERPLATE,ASSY D E RF
SUPSDS 408519
POST SB MC10-35-171
- 90E 451704 .. COVERPLATE,ASSY W RF
SUPSD BY 421B161
SUPSDS 448240
POST SB MC10-35-171
- 90F 421B161 .. COVERPLATE,ASSY W RF
SUPSDS 451704
POST SB MC10-35-267
ATTACHING PARTS
100 YSQ1ZD020008APA .. SCREW FB90 M2X8 A4-70-10 PSVT F0110 RF
(P150002)
***
110 406358 .. CORD,INTERMEDIATE RADIO RF
- 115 A1N0IR .. SLEEVE,ELECTRICAL F0331 RF
INSULATION
(P153484)
120 LHQ1UY020004U .. SCREW C M2X4 CU-ZN39PB2 F0110 RF
(P150984)
130 H1Q1ZD020014APA .. SCREW CS M2X14 STNLS STEEL F0110 RF
(P150322)
140 H2Q1ZD020018APA .. SCREW CLS M2X18 F0110 RF
(P149845)
- 150 448464 .. PLUG,ASSY RF
RPLD BY 437276
150A 437276 .. SEAL RF
RPLS 448464
POST SB MA-B-C-F10-35-87
POST SB MC-F10-35-111
160 DTS4014 . HOSE,ASSY FHJK 1
SEE CMM 35-13-72 (F5341) L N
FOR DET
- 160A DTS4019 . HOSE,ASSY G 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160B DTS4021 . HOSE,ASSY DQU 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160C DTS4024 . HOSE,ASSY T Z 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160D DTS4029 . HOSE,ASSY ERV 1
SEE CMM 35-13-72 (F5341)
FOR DET

- ITEM NOT ILLUSTRATED

Page 10071
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1D
- 160E DTS4032 . HOSE,ASSY C 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160F DTS4035 . HOSE,ASSY A Y 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160G DTS4060 . HOSE,ASSY S X 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160H DTS4065 . HOSE,ASSY B 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160J DTS4070 . HOSE, ASSY W 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160K DTS4104 . HOSE,ASSY MP 1
SEE CMM 35-13-72 (F5341)
FOR DET
ATTACHING PARTS
170 419628 . BLOCK,LOCKING RF
180 023037 . NUT RF
***
190 R00490X190A50D5 .. O-RING 4.9X1.9 50D5 F6117 RF
(P154675)
200 080589 . LABEL, TSO TYPE 1 D E 1
- 200A 080590 . LABEL, TSO TYPE 2 ABCF 1
GHJK
LMNP
RVZ
- 200B 080247 . LABEL, TSO TYPE 3 QSTU 1
WXY
210 080223 . NAMEPLATE 1
220 080573 . PLATE,FUNCTIONAL TEST C 1

- ITEM NOT ILLUSTRATED

Page 10072
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

REGULATOR, CREW OXYGEN MASK

SHEET 1 OF 1
Figure 1E/GRAPHIC-35-13-63-991-801-F01

Page 10073
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1E
-1 MC10-14-01 REGULATOR, CREW OXYGEN A RF
MASK
- 1A MC10-14-02 REGULATOR, CREW OXYGEN B RF
MASK
- 1B MC10-14-20 REGULATOR, CREW OXYGEN C RF
MASK
- 1C MC10-14-21 REGULATOR, CREW OXYGEN D RF
MASK
- 1D MC10-14-22 REGULATOR, CREW OXYGEN E RF
MASK
- 1E MC10-14-100 REGULATOR, CREW OXYGEN F RF
MASK
- 1F MC10-14-101 REGULATOR, CREW OXYGEN G RF
MASK
- 1G MC10-14-102 REGULATOR, CREW OXYGEN H RF
MASK
- 1H MC10-14-103 REGULATOR, CREW OXYGEN J RF
MASK
- 1J MC10-14-104 REGULATOR, CREW OXYGEN K RF
MASK
- 1K MC10-14-120 REGULATOR, CREW OXYGEN L RF
MASK
- 1L MC10-14-121 REGULATOR, CREW OXYGEN M RF
MASK
- 1M MC10-14-122 REGULATOR, CREW OXYGEN N RF
MASK
- 1N MC10-14-123 REGULATOR, CREW OXYGEN P RF
MASK
- 1P MC10-14-124 REGULATOR, CREW OXYGEN Q RF
MASK
- 1Q MC10-15-01 REGULATOR, CREW OXYGEN R RF
MASK
- 1R MC10-15-02 REGULATOR, CREW OXYGEN S RF
MASK
- 1S MC10-15-03 REGULATOR, CREW OXYGEN T RF
MASK
- 1T MC10-15-04 REGULATOR, CREW OXYGEN U RF
MASK
- 1U MC10-15-05 REGULATOR, CREW OXYGEN V RF
MASK
- 1V MC10-15-07 REGULATOR, CREW OXYGEN W RF
MASK
- 1W MC10-15-09 REGULATOR, CREW OXYGEN X RF
MASK
- 1X MC10-15-10 REGULATOR, CREW OXYGEN Y RF
MASK
- 1Y MC10-15-11 REGULATOR, CREW OXYGEN Z RF
MASK
- ITEM NOT ILLUSTRATED

Page 10074
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1E
- 1Z MC10-14-151 REGULATOR, CREW OXYGEN NP BA RF
MASK
FIELD ONLY
10 MXH15-2 . HARNESS,INFLATABLE ASSY NP 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 10A MXH15-22 . HARNESS,INFLATABLE ASSY NP 1
SUPSD BY MXH15-32
POST SB MA-B-C-F10-35-144
POST SB MC10-MF10-35-212
SEE CMM 35-13-71 (F5341)
FOR DET
- 10B MXH15-32 . HARNESS,INFLATABLE ASSY ABCD 1
SUPSDS MXH15-22 EFGH
POST SB MA-B-C-F10-35-260 JKLM
SEE CMM 35-13-71 (F5341) NPQR
FOR DET STUV
XYZ
- 10C MXH20 . HARNESS,INFLATABLE,ASSY NP BA 1
SUPSD BY MXH21-31
- 10D MXH20-1 . HARNESS,INFLATABLE,ASSY NP BA 1
SUPSD BY MXH21-31
SEE CMM 35-13-71 (F5341)
FOR DET
- 10E MXH21-31 . HARNESS,INFLATABLE,ASSY BA 1
SUPSDS MXH20
SUPSDS MXH20-1
POST SB MA-B-C-F10-35-260
SEE CMM 35-13-71 (F5341)
FOR DET
ATTACHING PARTS
20 YSQ1ZD020006APA . SCREW FBS90 M2X6 A4-70 PSVT F0110 RF
(P150001)
***
30 MXM22 . MASK,ASSY ABCD 1
SEE CMM 35-13-71 (F5341) ERST
FOR DET UVW
XYZ
- 30A MXM23 . MASK,ASSY BA F G 1
SEE CMM 35-13-71 (F5341) HJKL
FOR DET MNPQ
50 MXA1006 . MICROPHONE,ASSY NP A BA C 1
RPLD BY MXA1051 DFGL
SEE CMM 35-13-71 (F5341) M R S
FOR DET WZ

- ITEM NOT ILLUSTRATED

Page 10075
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1E
- 50A MXA1035 . MICROPHONE,ASSY V X 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50B MXA1036 . MICROPHONE,ASSY T U 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50C MXA1042 . MICROPHONE,ASSY KQY 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50D MXA1044 . MICROPHONE,ASSY BEHN 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50E MXA1045 . MICROPHONE,ASSY J P 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50G MXA1051 . MICROPHONE,ASSY A BA C 1
RPLS MXA1006 DFGL
SEE CMM 35-13-71 (F5341) M R S
FOR DET WZ
60 RMC1020 . REGULATOR,ASSY NP C F L 1
RPLD BY RMC2020
SEE CMM 35-13-70 (F5341)
FOR DET
- 60A RMC1020-1 . REGULATOR,ASSY NP A B BA 1
RPLD BY RMC2020-1 DEGH
SEE CMM 35-13-70 (F5341) JKMN
FOR DET PQ
- 60B RMC1022 . REGULATOR,ASSY NP R U W 1
RPLD BY RMC2022
SEE CMM 35-13-70 (F5341)
FOR DET
- 60C RMC1022-1 . REGULATOR,ASSY NP S T V Z 1
RPLD BY RMC2022-1
SEE CMM 35-13-70 (F5341)
FOR DET
- 60D RMC1022-2 . REGULATOR,ASSY NP X 1
RPLD BY RMC2022-2
SEE CMM 35-13-70 (F5341)
FOR DET
- 60E RMC1022-3 . REGULATOR,ASSY NP Y 1
RPLD BY RMC2022-3
SEE CMM 35-13-70 (F5341)
FOR DET

- ITEM NOT ILLUSTRATED

Page 10076
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1E
- 60F RMC2020 . REGULATOR,ASSY CFL 1
RPLS RMC1020
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
- 60G RMC2020-1 . REGULATOR,ASSY A B BA 1
RPLS RMC1020-1 DEGH
POST SB MC10-35-171 JKMN
SEE CMM 35-13-74 (F5341) PQ
FOR DET
- 60H RMC2022 . REGULATOR,ASSY RUW 1
RPLS RMC1022
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
- 60J RMC2022-1 . REGULATOR,ASSY STVZ 1
RPLS RMC1022-1
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
- 60K RMC2022-2 . REGULATOR,ASSY X 1
RPLS RMC1022-2
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
- 60L RMC2022-3 . REGULATOR,ASSY Y 1
RPLS RMC1022-3
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
ATTACHING PARTS
- 70 416611 . LOCK, MASK NP RF
RPLD BY 449039
70A 449039 . LOCK,MASK ASSY RF
RPLS 416611
POST SB MA-B-C-F10-35-89
- 80 LJQ1ZD030005UPA . SCREW, CL M3X5 NP RF
PRE SB MA-B-C-F10-35-89
***
90 448239 .. COVERPLATE,ASSY CFLR RF
SUPSD BY 451701 UWY
- 90A 448240 .. COVERPLATE,ASSY A B BA RF
SUPSD BY 451704 DEGH
JKMN
PQST
VXZ

- ITEM NOT ILLUSTRATED

Page 10077
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1E
- 90B 451701 .. COVERPLATE,ASSY CFLR RF
SUPSDS 448239 UWY
POST SB MC10-35-171
- 90C 451704 .. COVERPLATE,ASSY A B BA RF
SUPSD BY 421B161 DEGH
SUPSDS 448240 JKMN
POST SB MC10-35-171 PQST
VXZ
- 90D 421B161 .. COVERPLATE,ASSY A B BA RF
SUPSDS 451704 DEGH
POST SB MC10-35-267 JKMN
PQST
VXZ
ATTACHING PARTS
100 YSQ1ZD020008APA .. SCREW FB90 M2X8 A4-70-10 PSVT F0110 RF
(P150002)
***
110 406358 .. CORD,INTERMEDIATE RADIO RF
- 115 A1N0IR .. SLEEVE,ELECTRICAL F0331 RF
INSULATION
(P153484)
120 LHQ1UY020004U .. SCREW C M2X4 CU-ZN39PB2 F0110 RF
(P150984)
130 H1Q1ZD020014APA .. SCREW CS M2X14 STNLS STEEL F0110 RF
(P150322)
140 H2Q1ZD020018APA .. SCREW CLS M2X18 F0110 RF
(P149845)
- 150 448464 .. PLUG,ASSY RF
RPLD BY 437276
150A 437276 .. SEAL RF
RPLS 448464
POST SB MA-B-C-F10-35-87
POST SB MC-F10-35-111
160 DTS4024 . HOSE,ASSY A B BA C 1
SEE CMM 35-13-72 (F5341) DEFG
FOR DET HJKL
MNPQ
- 160A DTS4025 . HOSE,ASSY R 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160B DTS4029 . HOSE,ASSY UW 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160C DTS4030 . HOSE,ASSY S V 1
SEE CMM 35-13-72 (F5341)
FOR DET

- ITEM NOT ILLUSTRATED

Page 10078
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1E
- 160D DTS4033 . HOSE,ASSY T 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160E DTS4045 . HOSE,ASSY X Z 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160F DTS4051 . HOSE,ASSY Y 1
SEE CMM 35-13-72 (F5341)
FOR DET
ATTACHING PARTS
170 419628 . BLOCK,LOCKING RF
180 023037 . NUT RF
***
190 R00490X190A50D5 .. O-RING 4.9X1.9 50D5 F6117 RF
(P154675)
200 080590 . LABEL, TSO TYPE 2 1
210 080223 . NAMEPLATE 1

- ITEM NOT ILLUSTRATED

Page 10079
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

THIS PAGE INTENTIONALLY LEFT BLANK

Page 10080
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

REGULATOR, CREW OXYGEN MASK

SHEET 1 OF 1
Figure 1F/GRAPHIC-35-13-63-991-801-G01

Page 10081
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1F
-1 MC10-15-12 REGULATOR, CREW OXYGEN A RF
MASK
- 1A MC10-15-13 REGULATOR, CREW OXYGEN B RF
MASK
- 1B MC10-15-17 REGULATOR, CREW OXYGEN C RF
MASK
- 1C MC10-15-18 REGULATOR, CREW OXYGEN D RF
MASK
- 1D MC10-15-101 REGULATOR, CREW OXYGEN E RF
MASK
- 1E MC10-15-102 REGULATOR, CREW OXYGEN F RF
MASK
- 1F MC10-15-104 REGULATOR, CREW OXYGEN G RF
MASK
- 1G MC10-15-105 REGULATOR, CREW OXYGEN H RF
MASK
- 1H MC10-15-107 REGULATOR, CREW OXYGEN J RF
MASK
- 1J MC10-15-108 REGULATOR, CREW OXYGEN K RF
MASK
- 1K MC10-15-109 REGULATOR, CREW OXYGEN L RF
MASK
- 1L MC10-15-113 REGULATOR, CREW OXYGEN M RF
MASK
- 1M MC10-15-114 REGULATOR, CREW OXYGEN N RF
MASK
- 1N MC10-15-115 REGULATOR, CREW OXYGEN P RF
MASK
- 1P MC10-15-116 REGULATOR, CREW OXYGEN Q RF
MASK
- 1Q MC10-15-117 REGULATOR, CREW OXYGEN R RF
MASK
- 1R MC10-15-118 REGULATOR, CREW OXYGEN S RF
MASK
- 1S MC10-15-119 REGULATOR, CREW OXYGEN T RF
MASK
- 1T MC10-15-120 REGULATOR, CREW OXYGEN U RF
MASK
- 1U MC10-15-121 REGULATOR, CREW OXYGEN V RF
MASK
- 1V MC10-15-151 REGULATOR, CREW OXYGEN W RF
MASK
- 1W MC10-15-157 REGULATOR, CREW OXYGEN X RF
MASK
- 1X MC10-15-158 REGULATOR, CREW OXYGEN Y RF
MASK
- 1Y MC10-15-159 REGULATOR, CREW OXYGEN Z RF
MASK
- ITEM NOT ILLUSTRATED

Page 10082
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1F
10 MXH15-2 . HARNESS,INFLATABLE ASSY NP B E F G 1
RPLD BY MXH15-22 HJKL
SEE CMM 35-13-71 (F5341) MNPQ
FOR DET TUV
- 10A MXH16 . HARNESS,INFLATABLE,ASSY NP A C D 1
RPLD BY MXH16-20 R S
SEE CMM 35-13-71 (F5341)
FOR DET
- 10B MXH20-1 . HARNESS,INFLATABLE,ASSY NP W X Y Z 1
SUPSD BY MXH21-31
SEE CMM 35-13-71 (F5341)
FOR DET
- 10C MXH15-22 . HARNESS,INFLATABLE ASSY NP B E F G 1
RPLS MXH15-2 HJKL
SUPSD BY MXH15-32 MNPQ
POST SB MC-F10-35-140 TUV
POST SB MC10-35-209
POST SB MA-B-C-F10-35-144
POST SB MC10-MF10-35-141
SEE CMM 35-13-71 (F5341)
FOR DET
- 10D MXH16-20 . HARNESS,INFLATABLE,ASSY NP A C D 1
RPLS MXH16 R S
SUPSD BY MXH16-30
POST SB MA-B-C-F10-35-144
SEE CMM 35-13-71 (F5341)
FOR DET
- 10E MXH21-31 . HARNESS,INFLATABLE,ASSY WZ 1
SUPSDS MXH20-1
POST SB MA-B-C-F10-35-260
SEE CMM 35-13-71 (F5341)
FOR DET
- 10F MXH15-32 . HARNESS,INFLATABLE ASSY BEFH 1
SUPSDS MXH15-22 JKLM
POST SB MA-B-C-F10-35-260 NPQT
SEE CMM 35-13-71 (F5341) U V
FOR DET
- 10G MXH16-30 . HARNESS,INFLATABLE,ASSY A C D 1
SUPSDS MXH16-20 R S
POST SB MA-B-C-F10-35-260
SEE CMM 35-13-71 (F5341)
FOR DET
ATTACHING PARTS
20 YSQ1ZD020006APA . SCREW FBS90 M2X6 A4-70 PSVT F0110 RF
(P150001)
***

- ITEM NOT ILLUSTRATED

Page 10083
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1F
30 MXM22 . MASK,ASSY ABCD 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 30A MXM23 . MASK,ASSY EFGH 1
SEE CMM 35-13-71 (F5341) JKLM
FOR DET NPQR
STUV
WXYZ
50 MXA1006 . MICROPHONE,ASSY NP B F J 1
RPLD BY MXA1051
SEE CMM 35-13-71 (F5341)
FOR DET
- 50A MXA1016 . MICROPHONE,ASSY KQTY 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50B MXA1035 . MICROPHONE,ASSY HLU 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50C MXA1036 . MICROPHONE,ASSY GN 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50D MXA1042 . MICROPHONE,ASSY ACDR 1
SEE CMM 35-13-71 (F5341) SVZ
FOR DET
- 50E MXA1044 . MICROPHONE,ASSY P 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50F MXA1051 . MICROPHONE,ASSY BEFJ 1
RPLS MXA1006 MWX
SEE CMM 35-13-71 (F5341)
FOR DET
60 RMC1022 . REGULATOR,ASSY NP E G J K 1
RPLD BY RMC2022 P T W
SEE CMM 35-13-70 (F5341) X Y
FOR DET
- 60A RMC1022-1 . REGULATOR,ASSY NP B F H M 1
RPLD BY RMC2022-1 NQ
SEE CMM 35-13-70 (F5341)
FOR DET
- 60B RMC1022-2 . REGULATOR,ASSY NP L V Z 1
RPLD BY RMC2022-2
SEE CMM 35-13-70 (F5341)
FOR DET

- ITEM NOT ILLUSTRATED

Page 10084
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1F
- 60C RMC1022-3 . REGULATOR,ASSY NP U 1
RPLD BY RMC1122-3
RPLD BY RMC2022-3
SEE CMM 35-13-70 (F5341)
FOR DET
- 60D RMC1022-6 . REGULATOR,ASSY NP A C R 1
RPLD BY RMC2022-6
SEE CMM 35-13-70 (F5341)
FOR DET
- 60E RMC1022-7 . REGULATOR,ASSY NP D S 1
RPLD BY RMC2022-7
SEE CMM 35-13-70 (F5341)
FOR DET
- 60F RMC1122-3 . REGULATOR,ASSY U 1
RPLD BY RMC2122-3
RPLS RMC1022-3
POST SB MC-F10-35-123
SEE CMM 35-13-70 (F5341)
FOR DET
- 60G RMC2022-3 . REGULATOR,ASSY U 1
RPLS RMC1022-3
PRE SB MC-F10-35-123
POST SB MC10-MF10-35-165
SEE CMM 35-13-74 (F5341)
FOR DET
- 60H RMC2022-1 . REGULATOR,ASSY BFHM 1
RPLS RMC1022-1 NQ
POST SB MC10-35-210
POST SB MC10-35-171
POST SB MC10-15-35-176
SEE CMM 35-13-74 (F5341)
FOR DET
- 60J RMC2022-2 . REGULATOR,ASSY LVZ 1
RPLS RMC1022-2
POST SB MC10-MF10-35-165
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
- 60K RMC2122-3 . REGULATOR,ASSY U 1
RPLS RMC1122-3
POST SB MC10-MF10-35-165
SEE CMM 35-13-74 (F5341)
FOR DET

- ITEM NOT ILLUSTRATED

Page 10085
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1F
- 60L RMC2022 . REGULATOR,ASSY EGJK 1
RPLS RMC1022 P T W
POST SB MC10-35-171 X Y
POST SB MC10-15-35-176
SEE CMM 35-13-74 (F5341)
FOR DET
- 60M RMC2022-6 . REGULATOR,ASSY ACR 1
RPLS RMC1022-6
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
- 60N RMC2022-7 . REGULATOR,ASSY D S 1
RPLS RMC1022-7
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
ATTACHING PARTS
- 70 416611 . LOCK, MASK NP RF
RPLD BY 449039
70A 449039 . LOCK,MASK ASSY RF
RPLS 416611
POST SB MA-B-C-F10-35-89
- 80 LJQ1ZD030005UPA . SCREW, CL M3X5 NP RF
PRE SB MA-B-C-F10-35-89
***
90 448239 .. COVERPLATE,ASSY ACEG RF
SUPSD BY 451701 JKPRT
UWXY
- 90A 448240 .. COVERPLATE,ASSY BDFH RF
SUPSD BY 451704 LMNQ
SVZ
- 90B 450058 .. COVERPLATE,ASSY U RF
SUPSD BY 451714
POST SB MC-F10-35-123
- 90C 451704 .. COVERPLATE,ASSY ABCF RF
SUPSD BY 421B161 HMNQ
SUPSDS 448240 RU
POST SB MC10-35-210
POST SB MC10-MF10-35-165
POST SB MC10-35-171
- 90D 451714 .. COVERPLATE,ASSY LVZ RF
SUPSDS 450058
POST SB MC10-MF10-35-165
- 90E 451701 .. COVERPLATE,ASSY EGJK RF
SUPSDS 448239 PTUW
POST SB MC10-35-171 X Y
POST SB MC10-15-35-176

- ITEM NOT ILLUSTRATED

Page 10086
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1F
- 90F 421B161 .. COVERPLATE,ASSY BDFH RF
SUPSDS 451704 LMNQ
POST SB MC10-35-267 SUVZ
ATTACHING PARTS
100 YSQ1ZD020008APA .. SCREW FB90 M2X8 A4-70-10 PSVT F0110 RF
(P150002)
***
110 406358 .. CORD,INTERMEDIATE RADIO RF
- 115 A1N0IR .. SLEEVE,ELECTRICAL F0331 RF
INSULATION
(P153484)
120 LHQ1UY020004U .. SCREW C M2X4 CU-ZN39PB2 F0110 RF
(P150984)
130 H1Q1ZD020014APA .. SCREW CS M2X14 STNLS STEEL F0110 RF
(P150322)
140 H2Q1ZD020018APA .. SCREW CLS M2X18 F0110 RF
(P149845)
- 150 448464 .. PLUG,ASSY RF
RPLD BY 437276
150A 437276 .. SEAL RF
RPLS 448464
POST SB MA-B-C-F10-35-87
POST SB MC-F10-35-111
160 DTS4006 . HOSE,ASSY CR 1
SEE CMM 35-13-72 (F5341)
FOR DET
160A DTS4020 . HOSE,ASSY T 1
SEE CMM 35-13-72 (F5341)
FOR DET
160B DTS4021 . HOSE,ASSY NQ 1
SEE CMM 35-13-72 (F5341)
FOR DET
160C DTS4025 . HOSE,ASSY BEMW 1
SEE CMM 35-13-72 (F5341)
FOR DET
160D DTS4029 . HOSE,ASSY GJKP 1
SEE CMM 35-13-72 (F5341) X Y
FOR DET
160E DTS4030 . HOSE,ASSY F H 1
SEE CMM 35-13-72 (F5341)
FOR DET
160F DTS4045 . HOSE,ASSY L Z 1
SEE CMM 35-13-72 (F5341)
FOR DET
160G DTS4046 . HOSE,ASSY V 1
SEE CMM 35-13-72 (F5341)
FOR DET

- ITEM NOT ILLUSTRATED

Page 10087
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1F
160H DTS4095 . HOSE,ASSY ADS 1
SEE CMM 35-13-72 (F5341)
FOR DET
160J DTS4109 . HOSE,ASSY U 1
SEE CMM 35-13-72 (F5341)
FOR DET
ATTACHING PARTS
170 419628 . BLOCK,LOCKING RF
180 023037 . NUT RF
***
190 R00490X190A50D5 .. O-RING 4.9X1.9 50D5 F6117 RF
(P154675)
200 080590 . LABEL, TSO TYPE 2 1
210 080223 . NAMEPLATE 1

- ITEM NOT ILLUSTRATED

Page 10088
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

REGULATOR, CREW OXYGEN MASK

SHEET 1 OF 1
Figure 1G/GRAPHIC-35-13-63-991-801-H01

Page 10089
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1G
-1 MC10-15-166 REGULATOR, CREW OXYGEN A RF
MASK
- 1A MC10-15-167 REGULATOR, CREW OXYGEN B RF
MASK
- 1B MC10-15-170 REGULATOR, CREW OXYGEN C RF
MASK
- 1C MC10-15-171 REGULATOR, CREW OXYGEN D RF
MASK
- 1D MC10-15-176 REGULATOR, CREW OXYGEN E RF
MASK
- 1E MC10-16-100 REGULATOR, CREW OXYGEN F RF
MASK
- 1F MC10-16-101 REGULATOR, CREW OXYGEN G RF
MASK
- 1G MC10-16-103 REGULATOR, CREW OXYGEN H RF
MASK
- 1H MC10-16-104 REGULATOR, CREW OXYGEN J RF
MASK
- 1J MC10-16-105 REGULATOR, CREW OXYGEN K RF
MASK
- 1K MC10-16-150 REGULATOR, CREW OXYGEN L RF
MASK
- 1L MC10-16-151 REGULATOR, CREW OXYGEN M RF
MASK
- 1M MC10-16-152 REGULATOR, CREW OXYGEN N RF
MASK
- 1N MC10-17-00 REGULATOR, CREW OXYGEN P RF
MASK
- 1P MC10-17-100 REGULATOR, CREW OXYGEN Q RF
MASK
- 1Q MC10-17-101 REGULATOR, CREW OXYGEN R RF
MASK
- 1R MC10-19-00 REGULATOR, CREW OXYGEN S RF
MASK
- 1S MC10-19-01 REGULATOR, CREW OXYGEN NP T RF
MASK
- 1T MC10-19-02 REGULATOR, CREW OXYGEN U RF
MASK
- 1U MC10-19-101 REGULATOR, CREW OXYGEN NP V RF
MASK
- 1V MC10-19-102 REGULATOR, CREW OXYGEN W RF
MASK
- 1W MC10-19-103 REGULATOR, CREW OXYGEN X RF
MASK
- 1X MC10-20-00 REGULATOR, CREW OXYGEN NP Y RF
MASK
- 1Y MC10-22-00 REGULATOR, CREW OXYGEN Z RF
MASK
- ITEM NOT ILLUSTRATED

Page 10090
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1G
10 MXH15-2 . HARNESS,INFLATABLE ASSY NP F G H J 1
RPLD BY MXH15-22 KPQR
SEE CMM 35-13-71 (F5341) STUV
FOR DET WXYZ
- 10A MXH20-1 . HARNESS,INFLATABLE,ASSY NP A C D E 1
SUPSD BY MXH21-31 LMN
SEE CMM 35-13-71 (F5341)
FOR DET
- 10B MXH21-1 . HARNESS,INFLATABLE,ASSY NP B 1
SUPSD BY MXH21-31
SEE CMM 35-13-71 (F5341)
FOR DET
- 10C MXH15-22 . HARNESS,INFLATABLE ASSY NP F G H J 1
RPLS MXH15-2 KPQR
SUPSD BY MXH15-32 STUV
POST SB MC-F10-35-140 WXYZ
POST SB MA-B-C-F10-35-144
POST SB MC10-35-207
POST SB MC-F10-35-142
SEE CMM 35-13-71 (F5341)
FOR DET
- 10D MXH21-31 . HARNESS,INFLATABLE,ASSY ACDE 1
SUPSDS MXH20-1 LMN
POST SB MC10-35-274
POST SB MA-B-C-F10-35-260
SEE CMM 35-13-71 (F5341)
FOR DET
- 10E MXH21-31 . HARNESS,INFLATABLE,ASSY B 1
SUPSDS MXH21-1
POST SB MC10-35-274
POST SB MA-B-C-F10-35-260
SEE CMM 35-13-71 (F5341)
FOR DET
- 10F MXH15-32 . HARNESS,INFLATABLE ASSY FGHJ 1
SUPSDS MXH15-22 KPQR
POST SB MA-B-C-F10-35-260 STUW
SEE CMM 35-13-71 (F5341) XYZ
FOR DET
ATTACHING PARTS
20 YSQ1ZD020006APA . SCREW FBS90 M2X6 A4-70 PSVT F0110 RF
(P150001)
***
30 MXM22 . MASK,ASSY PSTU 1
SEE CMM 35-13-71 (F5341) Y Z
FOR DET

- ITEM NOT ILLUSTRATED

Page 10091
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1G
- 30A MXM23 . MASK,ASSY ABCD 1
SEE CMM 35-13-71 (F5341) EFGH
FOR DET JKLM
NQRV
WX
50 MXA1006 . MICROPHONE,ASSY NP R 1
RPLD BY MXA1051
SEE CMM 35-13-71 (F5341)
FOR DET
- 50A MXA1016 . MICROPHONE,ASSY AEPQ 1
SEE CMM 35-13-71 (F5341) TUVW
FOR DET
- 50B MXA1038 . MICROPHONE,ASSY SYZ 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50C MXA1042 . MICROPHONE,ASSY BCDF 1
SEE CMM 35-13-71 (F5341) GHJK
FOR DET LMN
- 50D MXA1051 . MICROPHONE,ASSY R X 1
RPLS MXA1006
SEE CMM 35-13-71 (F5341)
FOR DET
60 RMC1005 . REGULATOR,ASSY NP S T U V 1
RPLD BY RMC2005 WX
SEE CMM 35-13-70 (F5341)
FOR DET
- 60A RMC1012 . REGULATOR,ASSY NP Y 1
RPLD BY RMC2012
SEE CMM 35-13-70 (F5341)
FOR DET
- 60B RMC1016 . REGULATOR,ASSY NP F K L N 1
RPLD BY RMC2016
SEE CMM 35-13-70 (F5341)
FOR DET
- 60C RMC1016-1 . REGULATOR,ASSY NP G H J M 1
RPLD BY RMC2016-1
SEE CMM 35-13-70 (F5341)
FOR DET
- 60D RMC1018 . REGULATOR,ASSY NP P Q R Z 1
RPLD BY RMC2018
SEE CMM 35-13-70 (F5341)
FOR DET
- 60E RMC1022-1 . REGULATOR,ASSY NP A E 1
RPLD BY RMC2022-1
SEE CMM 35-13-70 (F5341)
FOR DET

- ITEM NOT ILLUSTRATED

Page 10092
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1G
- 60F RMC1022-2 . REGULATOR,ASSY NP D 1
RPLD BY RMC2022-2
SEE CMM 35-13-70 (F5341)
FOR DET
- 60G RMC1022-3 . REGULATOR,ASSY NP C 1
RPLD BY RMC2022-3
SEE CMM 35-13-70 (F5341)
FOR DET
- 60H RMC1022-6 . REGULATOR,ASSY NP B 1
RPLD BY RMC2022-6
SEE CMM 35-13-70 (F5341)
FOR DET
- 60J RMC1122-3 . REGULATOR,ASSY C 1
RPLD BY RMC2122-3
POST SB MC-F10-35-123
POST SB MC10-35-207
SEE CMM 35-13-70 (F5341)
FOR DET
- 60K RMC2022-3 . REGULATOR,ASSY C 1
RPLS RMC1022-3
PRE SB MC-F10-35-123
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
- 60L RMC2016 . REGULATOR,ASSY FKLN 1
RPLS RMC1016
POST SB MC10-MF10-35-165
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
- 60M RMC2016-1 . REGULATOR,ASSY GHJM 1
RPLS RMC1016-1
POST SB MC10-MF10-35-165
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
- 60N RMC2005 . REGULATOR,ASSY STUV 1
RPLS RMC1005 WX
POST SB MC10-35-171
POST SB MC10-MF10-35-158
SEE CMM 35-13-74 (F5341)
FOR DET
- 60P RMC2012 . REGULATOR,ASSY Y 1
RPLS RMC1012
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET

- ITEM NOT ILLUSTRATED

Page 10093
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1G
- 60Q RMC2018 . REGULATOR,ASSY PQRZ 1
RPLS RMC1018
POST SB MC10-35-171
POST SB MC10-MF10-35-158
SEE CMM 35-13-74 (F5341)
FOR DET
- 60R RMC2022-1 . REGULATOR,ASSY A E 1
RPLS RMC1022-1
POST SB MC10-15-35-176
SEE CMM 35-13-74 (F5341)
FOR DET
- 60S RMC2022-2 . REGULATOR,ASSY D 1
RPLS RMC1022-2
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
- 60T RMC2022-6 . REGULATOR,ASSY B 1
RPLS RMC1022-6
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
- 60U RMC2122-3 . REGULATOR,ASSY C 1
RPLS RMC1122-3
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
ATTACHING PARTS
- 70 416611 . LOCK, MASK NP RF
RPLD BY 449039
70A 449039 . LOCK,MASK ASSY RF
RPLS 416611
POST SB MA-B-C-F10-35-89
- 80 LJQ1ZD030005UPA . SCREW, CL M3X5 NP RF
PRE SB MA-B-C-F10-35-89
***
90 408519 .. COVERPLATE,ASSY PQRS RF
SUPSD BY 451699 TUVW
SUPSD BY 451714 X Z
- 90A 448239 .. COVERPLATE,ASSY BCFK RF
SUPSD BY 451701 LNY
- 90B 448240 .. COVERPLATE,ASSY ADEG RF
SUPSD BY 451704 HJM
- 90C 450058 .. COVERPLATE,ASSY C RF
POST SB MC-F10-35-123

- ITEM NOT ILLUSTRATED

Page 10094
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1G
- 90D 451701 .. COVERPLATE,ASSY CDST RF
SUPSDS 448239 UVWX
POST SB MC10-MF10-35-165
POST SB MC10-35-171
- 90E 451704 .. COVERPLATE,ASSY AEFK RF
SUPSDS 448240 LNPQ
POST SB MC10-MF10-35-165 R Z
POST SB MC10-15-35-176
POST SB MC10-35-171
POST SB MC10-35-267
- 90F 451699 .. COVERPLATE,ASSY G H J RF
SUPSDS 408519 MY
POST SB MC10-35-171
POST SB MC10-MF10-35-158
- 90G 451714 .. COVERPLATE,ASSY B RF
SUPSDS 408519
POST SB MC10-35-171
- 90H 421B161 .. COVERPLATE,ASSY D G H RF
POST SB MC10-35-267 J M
ATTACHING PARTS
- 100 YSQ1ZD020008APA .. SCREW FB90 M2X8 A4-70-10 PSVT F0110 RF
(P150002)
***
- 110 406358 .. CORD,INTERMEDIATE RADIO RF
- 115 A1N0IR .. SLEEVE,ELECTRICAL F0331 RF
INSULATION
(P153484)
- 120 LHQ1UY020004U .. SCREW C M2X4 CU-ZN39PB2 F0110 RF
(P150984)
- 130 H1Q1ZD020014APA .. SCREW CS M2X14 STNLS STEEL F0110 RF
(P150322)
- 140 H2Q1ZD020018APA .. SCREW CLS M2X18 F0110 RF
(P149845)
- 150 448464 .. PLUG,ASSY RF
RPLD BY 437276
150A 437276 .. SEAL RF
RPLS 448464
POST SB MA-B-C-F10-35-87
POST SB MC-F10-35-111
160 DTS4005 . HOSE,ASSY Z 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160A DTS4006 . HOSE,ASSY B 1
SEE CMM 35-13-72 (F5341)
FOR DET

- ITEM NOT ILLUSTRATED

Page 10095
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1G
- 160B DTS4010 . HOSE,ASSY N 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160C DTS4020 . HOSE,ASSY R 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160D DTS4021 . HOSE,ASSY A 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160E DTS4029 . HOSE,ASSY PQ 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160F DTS4040 . HOSE,ASSY NP T V 1
OPT TO DTS4032 (F5341)
- 160G DTS4032 . HOSE,ASSY STUV 1
SEE CMM 35-13-72 (F5341) WY
FOR DET
- 160H DTS4046 . HOSE,ASSY DGM 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160J DTS4059 . HOSE, ASSY F L 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160K DTS4063 . HOSE,ASSY J 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160L DTS4070 . HOSE, ASSY K 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160M DTS4095 . HOSE,ASSY H 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160N DTS4109 . HOSE,ASSY C 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160P DTS4117 . HOSE,ASSY E 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160Q DTS4131 . HOSE,ASSY X 1
SEE CMM 35-13-72 (F5341)
FOR DET
ATTACHING PARTS
170 419628 . BLOCK,LOCKING RF
180 023037 . NUT RF
***
190 R00490X190A50D5 .. O-RING 4.9X1.9 50D5 F6117 RF
(P154675)

- ITEM NOT ILLUSTRATED

Page 10096
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1G
200 080589 . LABEL, TSO TYPE 1 PQRZ 1
- 200A 080590 . LABEL, TSO TYPE 2 ABCD 1
EFGH
JKLM
NSTU
VWXY
210 080223 . NAMEPLATE 1
220 080573 . PLATE,FUNCTIONAL TEST PQST 1
V Z

- ITEM NOT ILLUSTRATED

Page 10097
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

THIS PAGE INTENTIONALLY LEFT BLANK

Page 10098
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

REGULATOR, CREW OXYGEN MASK

SHEET 1 OF 1
Figure 1H/GRAPHIC-35-13-63-991-801-I01

Page 10099
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1H
-1 MC10-22-01 REGULATOR, CREW OXYGEN A RF
MASK
- 1A MC10-22-100 REGULATOR, CREW OXYGEN B RF
MASK
- 1B MC10-22-101 REGULATOR, CREW OXYGEN C RF
MASK
- 1C MC10-25-00 REGULATOR, CREW OXYGEN D RF
MASK
- 1D MC10-25-01 REGULATOR, CREW OXYGEN NP E RF
MASK
- 1E MC10-25-04 REGULATOR, CREW OXYGEN F RF
MASK
- 1F MC10-25-101 REGULATOR, CREW OXYGEN NP G RF
MASK
- 1G MC10-25-102 REGULATOR, CREW OXYGEN H RF
MASK
- 1H MC10-25-103 REGULATOR, CREW OXYGEN J RF
MASK
- 1J MC10-25-104 REGULATOR, CREW OXYGEN NP K RF
MASK
- 1K MC10-25-105 REGULATOR, CREW OXYGEN L RF
MASK
- 1L MC10-25-106 REGULATOR, CREW OXYGEN M RF
MASK
- 1M MC10-25-124 REGULATOR, CREW OXYGEN N RF
MASK
- 1N MC10-25-154 REGULATOR, CREW OXYGEN P RF
MASK
- 1P MC10-25-158 REGULATOR, CREW OXYGEN NP Q RF
MASK
- 1Q MC10-25-204 REGULATOR, CREW OXYGEN R RF
MASK
- 1R MC10-32-101 REGULATOR, CREW OXYGEN S RF
MASK
- 1S MC10-32-102 REGULATOR, CREW OXYGEN T RF
MASK
- 1T MC10-32-103 REGULATOR, CREW OXYGEN U RF
MASK
- 1U MC10-35-101 REGULATOR, CREW OXYGEN V RF
MASK
- 1V MC10-02-171 REGULATOR, CREW OXYGEN W RF
MASK
- 1W MC10-25-107 REGULATOR, CREW OXYGEN X RF
MASK
- 1X MC10-05-102 REGULATOR, CREW OXYGEN Y RF
MASK
- 1Y MC10-19-151 REGULATOR, CREW OXYGEN Z RF
MASK
- ITEM NOT ILLUSTRATED

Page 10100
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1H
10 MXH15-2 . HARNESS,INFLATABLE ASSY NP A B C D 1
RPLD BY MXH15-22 EFGH
SEE CMM 35-13-71 (F5341) JKLM
FOR DET NRST
UWX
- 10A MXH16 . HARNESS,INFLATABLE,ASSY NP V Y 1
RPLD BY MXH16-20
SEE CMM 35-13-71 (F5341)
FOR DET
- 10B MXH21-1 . HARNESS,INFLATABLE,ASSY NP P Q Z 1
SUPSD BY MXH21-31
SEE CMM 35-13-71 (F5341)
FOR DET
- 10C MXH15-22 . HARNESS,INFLATABLE ASSY NP A B C D 1
RPLS MXH15-2 EFGH
SUPSD BY MXH15-32 JKLM
POST SB MA-B-C-F10-35-144 NRST
POST SB MC-F10-35-142 UWX
POST SB MSE101-MC10-35-205
SEE CMM 35-13-71 (F5341)
FOR DET
- 10D MXH16-20 . HARNESS,INFLATABLE,ASSY NP V Y 1
RPLS MXH16
SUPSD BY MXH16-30
POST SB MA-B-C-F10-35-144
SEE CMM 35-13-71 (F5341)
FOR DET
- 10E MXH15-32 . HARNESS,INFLATABLE ASSY ABCD 1
SUPSDS MXH15-22 EFHJL
POST SB MA-B-C-F10-35-260 MNRS
POST SB MCF10-MF20-35-255 TUWX
SEE CMM 35-13-71 (F5341)
FOR DET
- 10F MXH21-31 . HARNESS,INFLATABLE,ASSY PQZ 1
SUPSDS MXH21-1
POST SB MC10-35-274
POST SB MA-B-C-F10-35-260
SEE CMM 35-13-71 (F5341)
FOR DET
- 10G MXH16-30 . HARNESS,INFLATABLE,ASSY V Y 1
SUPSDS MXH16-20
POST SB MA-B-C-F10-35-260
POST SB MCF10-35-252
SEE CMM 35-13-71 (F5341)
FOR DET

- ITEM NOT ILLUSTRATED

Page 10101
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1H
ATTACHING PARTS
20 YSQ1ZD020006APA . SCREW FBS90 M2X6 A4-70 PSVT F0110 RF
(P150001)
***
25 050038 . CLIP R 2
30 MXM22 . MASK,ASSY ADEF 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 30A MXM23 . MASK,ASSY BCGH 1
SEE CMM 35-13-71 (F5341) JKLM
FOR DET NPQR
STUV
WXYZ
50 MXA1016 . MICROPHONE,ASSY EFGJ 1
SEE CMM 35-13-71 (F5341) KLMN
FOR DET PQRS
Y Z
- 50A MXA1038 . MICROPHONE,ASSY B D 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50B MXA1040 . MICROPHONE,ASSY U 1
SUPSD BY MXA1059
SEE CMM 35-13-71 (F5341)
FOR DET
- 50C MXA1042 . MICROPHONE,ASSY V 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50D MXA1044 . MICROPHONE,ASSY A C 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50E MXA1049 . MICROPHONE,ASSY T 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50F MXA1052 . MICROPHONE,ASSY H X 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50G MXA1035 . MICROPHONE,ASSY W 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50H MXA1059 . MICROPHONE,ASSY U 1
SUPSDS MXA1040
POST SB MC10-MF10-35-249
SEE CMM 35-13-71 (F5341)
FOR DET

- ITEM NOT ILLUSTRATED

Page 10102
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1H
60 RMC1018 . REGULATOR,ASSY NP A B C W 1
RPLD BY RMC2018
SEE CMM 35-13-70 (F5341)
FOR DET
- 60A RMC1018-1 . REGULATOR,ASSY NP D E F G 1
RPLD BY RMC2018-1 JKLN
SEE CMM 35-13-70 (F5341) PQRX
FOR DET
- 60B RMC1018-2 . REGULATOR,ASSY NP M 1
RPLD BY RMC2018-2
SEE CMM 35-13-70 (F5341)
FOR DET
- 60C RMC1018-5 . REGULATOR,ASSY NP H 1
RPLD BY RMC2018-5
SEE CMM 35-13-70 (F5341)
FOR DET
- 60D RMC1029 . REGULATOR,ASSY NP S T U 1
RPLD BY RMC2029
SEE CMM 35-13-70 (F5341)
FOR DET
- 60E RMC1035 . REGULATOR,ASSY NP V 1
RPLD BY RMC2035
SEE CMM 35-13-70 (F5341)
FOR DET
- 60F RMC1005 . REGULATOR,ASSY NP Z 1
RPLD BY RMC2005
SEE CMM 35-13-70 (F5341)
FOR DET
- 60G RMC1006 . REGULATOR ASSY NP Y 1
RPLD BY RMC2006
SEE CMM 35-13-70 (F5341)
FOR DET
- 60H RMC2018 . REGULATOR,ASSY ABCW 1
RPLS RMC1018
POST SB MC10-35-171
POST SB MC10-MF10-35-158
POST SB MC10-35-207
SEE CMM 35-13-74 (F5341)
FOR DET
- 60J RMC2018-1 . REGULATOR,ASSY DEFG 1
RPLS RMC1018-1 JKLN
POST SB MC10-35-171 PQRX
POST SB MC10-MF10-35-158
SEE CMM 35-13-74 (F5341)
FOR DET

- ITEM NOT ILLUSTRATED

Page 10103
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1H
- 60K RMC2018-2 . REGULATOR,ASSY M 1
RPLS RMC1018-2
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
- 60L RMC2018-5 . REGULATOR,ASSY H 1
RPLS RMC1018-5
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
- 60M RMC2029 . REGULATOR,ASSY STU 1
RPLS RMC1029
POST SB MC10-35-171
POST SB MSE101-MC10-35-206
SEE CMM 35-13-74 (F5341)
FOR DET
- 60N RMC2035 . REGULATOR,ASSY V 1
RPLS RMC1035
POST SB MC10-MF10-35-167
SEE CMM 35-13-74 (F5341)
FOR DET
- 60P RMC2005 . REGULATOR,ASSY Z 1
RPLS RMC1005
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
- 60Q RMC2006 . REGULATOR,ASSY Y 1
RPLS RMC1006
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
ATTACHING PARTS
- 70 416611 . LOCK, MASK NP RF
RPLD BY 449039
70A 449039 . LOCK,MASK ASSY RF
RPLS 416611
POST SB MA-B-C-F10-35-89
- 80 LJQ1ZD030005UPA . SCREW, CL M3X5 NP RF
PRE SB MA-B-C-F10-35-89
***
90 408519 .. COVERPLATE,ASSY ABCD RF
SUPSD BY 451699 EFGH
JKLN
PQRS
TUWX
Y Z

- ITEM NOT ILLUSTRATED

Page 10104
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1H
- 90A 441067 .. COVERPLATE,ASSY M RF
SUPSD BY 451700
- 90B 448239 .. COVERPLATE,ASSY V RF
SUPSD BY 451701
- 90C 451699 .. COVERPLATE,ASSY ABCD RF
SUPSDS 408519 EFGH
POST SB MC10-35-171 JKLN
POST SB MC10-MF10-35-158 PQRS
POST SB MC10-35-207 TUWX
POST SB MSE101-MC10-35-206 Y Z
- 90D 451700 .. COVERPLATE,ASSY M RF
SUPSDS 441067
POST SB MC10-35-171
- 90E 451701 .. COVERPLATE,ASSY V RF
SUPSDS 448239
POST SB MC10-MF10-35-167
ATTACHING PARTS
100 YSQ1ZD020008APA .. SCREW FB90 M2X8 A4-70-10 PSVT F0110 RF
(P150002)
***
110 406358 .. CORD,INTERMEDIATE RADIO RF
- 115 A1N0IR .. SLEEVE,ELECTRICAL F0331 RF
INSULATION
(P153484)
120 LHQ1UY020004U .. SCREW C M2X4 CU-ZN39PB2 F0110 RF
(P150984)
130 H1Q1ZD020014APA .. SCREW CS M2X14 STNLS STEEL F0110 RF
(P150322)
140 H2Q1ZD020018APA .. SCREW CLS M2X18 F0110 RF
(P149845)
- 150 448464 .. PLUG,ASSY RF
RPLD BY 437276
150A 437276 .. SEAL RF
RPLS 448464
POST SB MA-B-C-F10-35-87
POST SB MC-F10-35-111
160 DTS4005 . HOSE,ASSY ABC 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160A DTS4040 . HOSE,ASSY NP E G 1
OPT TO DTS4032 (F5341)
- 160B DTS4032 . HOSE,ASSY D EFG 1
SEE CMM 35-13-72 (F5341) H K M
FOR DET N PQR
V Z
- 160C DTS4049 . HOSE,ASSY NP J 1

- ITEM NOT ILLUSTRATED

Page 10105
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1H
- 160D DTS4059 . HOSE, ASSY J L 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160E DTS4076 . HOSE,ASSY S T 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160F DTS4090 . HOSE,ASSY U 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160G DTS4029 . HOSE,ASSY WY 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160H DTS4145 . HOSE,ASSY X 1
SEE CMM 35-13-72 (F5341)
FOR DET
ATTACHING PARTS
170 419628 . BLOCK,LOCKING RF
180 023037 . NUT RF
***
190 R00490X190A50D5 .. O-RING 4.9X1.9 50D5 F6117 RF
(P154675)
200 080589 . LABEL, TSO TYPE 1 ABCE 1
FGHJ
KLMN
PQRW
X Y
- 200A 080590 . LABEL, TSO TYPE 2 DSTU 1
V Z
210 080223 . NAMEPLATE 1
220 080573 . PLATE,FUNCTIONAL TEST ABCD 1
EFGH
JKLM
NPQR
X Z

- ITEM NOT ILLUSTRATED

Page 10106
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

REGULATOR, CREW OXYGEN MASK

SHEET 1 OF 1
Figure 1J/GRAPHIC-35-13-63-991-801-J01

Page 10107
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1J
-1 MC10-15-168 REGULATOR, CREW OXYGEN A RF
MASK
- 1A MC10-16-153 REGULATOR, CREW OXYGEN B RF
MASK
- 1B MC10-15-152 REGULATOR, CREW OXYGEN C RF
MASK
- 1C MC10-15-155 REGULATOR, CREW OXYGEN D RF
MASK
- 1D MC10-15-122 REGULATOR, CREW OXYGEN E RF
MASK
- 1E MC10-35-102 REGULATOR, CREW OXYGEN NP F RF
MASK
- 1F MC10-25-108 REGULATOR, CREW OXYGEN G RF
MASK
10 MXH21-1 . HARNESS,INFLATABLE,ASSY NP A 1
SUPSD BY MXH21-31
SEE CMM 35-13-71 (F5341)
FOR DET
- 10A MXH20-1 . HARNESS,INFLATABLE,ASSY NP B C D 1
SUPSD BY MXH21-31
SEE CMM 35-13-71 (F5341)
FOR DET
- 10B MXH15-22 . HARNESS,INFLATABLE ASSY NP E 1
SUPSD BY MXH15-32
SEE CMM 35-13-71 (F5341)
FOR DET
- 10C MXH16-20 . HARNESS,INFLATABLE,ASSY NP F 1
SUPSD BY MXH16-30
SEE CMM 35-13-71 (F5341)
FOR DET
- 10D MXH15-23 . HARNESS,INFLATABLE ASSY G 1
RPLD BY MXH15-33
SEE CMM 35-13-71 (F5341)
FOR DET
- 10E MXH15-32 . HARNESS,INFLATABLE ASSY E 1
SUPSDS MXH15-22
POST SB MCF10-35-262
SEE CMM 35-13-71 (F5341)
FOR DET
- 10F MXH21-31 . HARNESS,INFLATABLE,ASSY BCD 1
SUPSDS MXH20-1
POST SB MC10-35-274
POST SB MA-B-C-F10-35-260
SEE CMM 35-13-71 (F5341)
FOR DET

- ITEM NOT ILLUSTRATED

Page 10108
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1J
- 10G MXH21-31 . HARNESS,INFLATABLE,ASSY A 1
SUPSDS MXH21-1
POST SB MC10-35-274
POST SB MA-B-C-F10-35-260
SEE CMM 35-13-71 (F5341)
FOR DET
- 10H MXH16-30 . HARNESS,INFLATABLE,ASSY F 1
SUPSDS MXH16-20
POST SB MA-B-C-F10-35-260
SEE CMM 35-13-71 (F5341)
FOR DET
- 10J MXH15-33 . HARNESS,INFLATABLE ASSY G 1
RPLS MXH15-23
POST SB MA-B-C-F10-35-260
POST SB MCF10-35-252
ATTACHING PARTS
20 YSQ1ZD020006APA . SCREW FBS90 M2X6 A4-70 PSVT F0110 RF
(P150001)
***
30 MXM23 . MASK,ASSY 1
SEE CMM 35-13-71 (F5341)
FOR DET
50 MXA1042 . MICROPHONE,ASSY ABEF 1
SEE CMM 35-13-71 (F5341)
FOR DET
50A MXA1035 . MICROPHONE,ASSY D 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50B MXA1051 . MICROPHONE,ASSY C 1
SEE CMM 35-13-71 (F5341)
FOR DET
60 RMC1016-1 . REGULATOR,ASSY NP B 1
RPLD BY RMC2016-1
SEE CMM 35-13-70 (F5341)
FOR DET
- 60A RMC1022-7 . REGULATOR,ASSY NP A 1
RPLD BY RMC2022-7
SEE CMM 35-13-70 (F5341)
FOR DET
- 60B RMC1022-1 . REGULATOR,ASSY NP C D 1
RPLD BY RMC2022-1
SEE CMM 35-13-70 (F5341)
FOR DET
- 60C RMC1122-3 . REGULATOR,ASSY NP E 1
RPLD BY RMC2122-3
SEE CMM 35-13-70 (F5341)
FOR DET

- ITEM NOT ILLUSTRATED

Page 10109
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1J
- 60D RMC1035 . REGULATOR,ASSY NP F 1
RPLD BY RMC2035
SEE CMM 35-13-70 (F5341)
FOR DET
- 60E RMC2122-3 . REGULATOR,ASSY E 1
RPLS RMC1122-3
POST SB MC10-35-169
SEE CMM 35-13-74 (F5341)
FOR DET
- 60F RMC2016-1 . REGULATOR,ASSY B 1
RPLS RMC1016-1
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
- 60G RMC2022-7 . REGULATOR,ASSY A 1
RPLS RMC1022-7
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
- 60H RMC2022-1 . REGULATOR,ASSY CD 1
RPLS RMC1022-1
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
- 60J RMC2035 . REGULATOR,ASSY F 1
RPLS RMC1035
POST SB MC10-MF10-35-167
SEE CMM 35-13-74 (F5341)
FOR DET
- 60K RMC1018-6 . REGULATOR,ASSY NP G 1
RPLD BY RMC2018-6
- 60L RMC2018-6 . REGULATOR,ASSY G 1
RPLS RMC1018-6
POST SB MC10-35-171
SEE CMM 35-13-74 (F5341)
FOR DET
ATTACHING PARTS
- 70 416611 . LOCK, MASK NP RF
RPLD BY 449039
70A 449039 . LOCK,MASK ASSY RF
RPLS 416611
POST SB MA-B-C-F10-35-89
- 80 LJQ1ZD030005UPA . SCREW, CL M3X5 NP RF
PRE SB MA-B-C-F10-35-89
***
90 448240 .. COVERPLATE,ASSY ABCD RF
SUPSD BY 451704

- ITEM NOT ILLUSTRATED

Page 10110
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1J
- 90A 450058 .. COVERPLATE,ASSY E RF
SUPSD BY 451714
- 90B 448239 .. COVERPLATE,ASSY F RF
SUPSD BY 451701
- 90C 451714 .. COVERPLATE,ASSY E RF
SUPSDS 450058
POST SB MC10-35-169
- 90D 451701 .. COVERPLATE,ASSY F RF
SUPSDS 448239
POST SB MC10-MF10-35-167
- 90E 451704 .. COVERPLATE,ASSY ABCD RF
SUPSD BY 421B161
SUPSDS 448240
POST SB MC10-35-171
POST SB MC10-MF10-35-167
- 90F 408519 .. COVERPLATE,ASSY G RF
SUPSD BY 451699
POST SB MC10-35-171
POST SB MC10-MF10-35-167
- 90G 451699 .. COVERPLATE,ASSY G RF
SUPSDS 408519
POST SB MC10-35-171
- 90H 421B161 .. COVERPLATE,ASSY ABCD RF
SUPSDS 451704
POST SB MC10-35-267
ATTACHING PARTS
100 YSQ1ZD020008APA .. SCREW FB90 M2X8 A4-70-10 PSVT F0110 RF
(P150002)
***
110 406358 .. CORD,INTERMEDIATE RADIO RF
- 115 A1N0IR .. SLEEVE,ELECTRICAL F0331 RF
INSULATION
(P153484)
120 LHQ1UY020004U .. SCREW C M2X4 CU-ZN39PB2 F0110 RF
(P150984)
130 H1Q1ZD020014APA .. SCREW CS M2X14 STNLS STEEL F0110 RF
(P150322)
140 H2Q1ZD020018APA .. SCREW CLS M2X18 F0110 RF
(P149845)
- 150 448464 .. PLUG,ASSY RF
RPLD BY 437276
150A 437276 .. SEAL RF
RPLS 448464
POST SB MA-B-C-F10-35-87
POST SB MC-F10-35-111

- ITEM NOT ILLUSTRATED

Page 10111
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1J
160 DTS4095 . HOSE,ASSY A B 1
SEE CMM 35-13-72 (F5341)
FOR DET
160A DTS4030 . HOSE,ASSY CD 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160B DTS4161 . HOSE,ASSY E 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160C DTS4032 . HOSE,ASSY F 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160D DTS4167 . HOSE,ASSY G 1
SEE CMM 35-13-72 (F5341)
FOR DET
ATTACHING PARTS
170 419628 . BLOCK,LOCKING RF
180 023037 . NUT RF
***
190 R00490X190A50D5 .. O-RING 4.9X1.9 50D5 F6117 RF
(P154675)
200 080590 . LABEL, TSO TYPE 2 ABCD 1
E F
- 200A 080589 . LABEL, TSO TYPE 1 G 1
210 080223 . NAMEPLATE 1

- ITEM NOT ILLUSTRATED

Page 10112
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

REGULATOR, CREW OXYGEN MASK

SHEET 1 OF 1
Figure 1K/GRAPHIC-35-13-63-991-801-K01

Page 10113
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1K
-1 MC10-12-152 REGULATOR, CREW OXYGEN A RF
MASK
- 1A MC10-02-103 REGULATOR, CREW OXYGEN B RF
MASK
- 1B MC10-02-114 REGULATOR, CREW OXYGEN C RF
MASK
- 1C MC10-02-60 REGULATOR, CREW OXYGEN D RF
MASK
- 1D MC10-25-159 REGULATOR, CREW OXYGEN E RF
MASK
- 1E MC10-06-127 REGULATOR, CREW OXYGEN F RF
MASK
- 1F MC10-06-128 REGULATOR, CREW OXYGEN G RF
MASK
- 1G MC10-13-151 REGULATOR, CREW OXYGEN H RF
MASK
- 1H MC10-25-110 REGULATOR, CREW OXYGEN J RF
MASK
- 1J MC10-08-114 REGULATOR, CREW OXYGEN K RF
MASK
- 1K MC10-08-116 REGULATOR, CREW OXYGEN L RF
MASK
- 1L MC10-19-03 REGULATOR, CREW OXYGEN M RF
MASK
- 1M MC10-19-104 REGULATOR, CREW OXYGEN N RF
MASK
- 1N MC10-25-02 REGULATOR, CREW OXYGEN P RF
MASK
10 MXH61-30 . HARNESS,INFLATABLE,ASSY A H 1
- 10A MXH15-32 . HARNESS,INFLATABLE ASSY BCFG 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 10B MXH15-34 . HARNESS,INFLATABLE ASSY JKLM 1
N P
- 10C MXH22-30 . HARNESS,INFLATABLE ASSY D 1
- 10D MXH21-31 . HARNESS,INFLATABLE,ASSY E 1
SEE CMM 35-13-71 (F5341)
FOR DET
ATTACHING PARTS
20 YSQ1ZD020006APA . SCREW FBS90 M2X6 A4-70 PSVT F0110 RF
(P150001)
***
30 MXM23 . MASK,ASSY ABCD 1
SEE CMM 35-13-71 (F5341) EFGH
FOR DET JKLN
- 30A MXM22 . MASK,ASSY MP 1
SEE CMM 35-13-71 (F5341)
FOR DET
- ITEM NOT ILLUSTRATED

Page 10114
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1K
50 MXA1042 . MICROPHONE,ASSY A 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50A MXA1051 . MICROPHONE,ASSY B H 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50B MXA1046 . MICROPHONE,ASSY C 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50C MXA1012 . MICROPHONE,ASSY D 1
SEE CMM 35-13-71 (F5341)
FOR DET
- 50D MXA1016 . MICROPHONE,ASSY EJKL 1
SEE CMM 35-13-71 (F5341) MNP
FOR DET
- 50E MXA1054 . MICROPHONE,ASSY F G 1
SEE CMM 35-13-71 (F5341)
FOR DET
60 RMC1018-1 . REGULATOR,ASSY J 1
APPLIED TO MC10-25-101AND
MC10-25-104
PRE ADMT: T
PRE SB MC10MF10-35-158
SEE CMM 35-13-70 (F5341)
FOR DET
- 60A RMC2022-5 . REGULATOR,ASSY A 1
SEE CMM 35-13-74 (F5341)
FOR DET
- 60B RMC2018-2 . REGULATOR,ASSY BCFG 1
SEE CMM 35-13-74 (F5341)
FOR DET
- 60C RMC2018-3 . REGULATOR,ASSY D 1
SEE CMM 35-13-74 (F5341)
FOR DET
- 60D RMC2018-1 . REGULATOR,ASSY EJP 1
SEE CMM 35-13-74 (F5341)
FOR DET
- 60E RMC2019 . REGULATOR,ASSY H 1
SEE CMM 35-13-74 (F5341)
FOR DET
- 60F RMC2007-1 . REGULATOR,ASSY K L 1
SEE CMM 35-13-74 (F5341)
FOR DET
- 60G RMC2005 . REGULATOR,ASSY MN 1
SEE CMM 35-13-74 (F5341)
FOR DET

- ITEM NOT ILLUSTRATED

Page 10115
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1K
ATTACHING PARTS
70 449039 . LOCK,MASK ASSY RF
***
90 408519 .. COVERPLATE,ASSY J RF
APPLIED TO MC10-25-101AND
MC10-25-104
PRE AMDT: T
PRE SB MC10MF10-35-158
- 90A 451701 .. COVERPLATE,ASSY AHKL RF
- 90B 421B224 .. COVERPLATE,ASSY B C D RF
F G
- 90C 451699 .. COVERPLATE,ASSY E J M RF
N P
ATTACHING PARTS
100 YSQ1ZD020008APA .. SCREW FB90 M2X8 A4-70-10 PSVT F0110 RF
(P150002)
***
110 406358 .. CORD,INTERMEDIATE RADIO RF
- 115 A1N0IR .. SLEEVE,ELECTRICAL F0331 RF
INSULATION
(P153484)
120 LHQ1UY020004U .. SCREW C M2X4 CU-ZN39PB2 F0110 RF
(P150984)
ATTACHING PARTS
130 H1Q1ZD020014APA .. SCREW CS M2X14 STNLS STEEL F0110 RF
(P150322)
***
140 H2Q1ZD020018APA .. SCREW CLS M2X18 F0110 RF
(P149845)
150 437276 .. SEAL RF
160 DTS4104 . HOSE,ASSY A 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160A DTS4046 . HOSE,ASSY B 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160B DTS4100 . HOSE,ASSY C 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160C DTS4181 . HOSE,ASSY D 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160E DTS4022 . HOSE,ASSY F 1
SEE CMM 35-12-72 (F5341)
FOR DET

- ITEM NOT ILLUSTRATED

Page 10116
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

AIRLINE UNITS
NOMENCLATURE USAGE
FIG. ITEM PART NUMBER PART PER
CODE
No. 1234567
ASSY
1K
- 160F DTS4023 . HOSE,ASSY G 1
SEE CMM 35-12-72 (F5341)
FOR DET
- 160G DTS4035 . HOSE,ASSY H L 1
SEE CMM 35-13-72 (F5341)
FOR DET
- 160H DTS4032 . HOSE,ASSY EJKM 1
SEE CMM 35-13-72 (F5341) N P
FOR DET
ATTACHING PARTS
170 419628 . BLOCK,LOCKING RF
180 023037 . NUT RF
***
190 R00490X190A50D5 .. O-RING 4.9X1.9 50D5 F6117 RF
(P154675)
200 080590 . LABEL, TSO TYPE 2 AHKL 1
MN
- 200A 080589 . LABEL, TSO TYPE 1 BCEJP 1
- 200B 081522 . TSO LABEL F G 1
210 080223 . NAMEPLATE 1
220 080573 . PLATE,FUNCTIONAL TEST EJK 1

- ITEM NOT ILLUSTRATED

Page 10117
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

SPECIAL PROCEDURES

TASK 35-13-63-860-801-A01
1. OVERHAUL OF THE CREW OXYGEN MASK REGULATOR

A. General

WARNING : STRICTLY OBEY THE PROCEDURES FOR THE USE OF OXYGEN

EQUIPMENT. DO NOT USE OIL, GREASE OR OTHER LUBRICANTS
MADE FROM PETROL IN THE AREA OF OXYGEN EQUIPMENT. THIS
CAN CAUSE A DANGEROUS FIRE HAZARD.

(1) Reason for the job

(a) During an overhaul, some parts have to be replaced systematically, and
some have to be replaced depending on the conditions (Refer to SIL 18).
NOTE : This recommendation is linked to the risk of performance degrada-
tions for the equipment, especially the elastomer parts in contact
with oxygen, even not permanently.

SUBTASK 35-13-63-860-001-A01
B. Description of an overhaul
(1) Refer to CMM 35-13-70 or CMM 35-13-74 for the overhaul of the regulator
assembly.
(2) Refer to CMM 35-13-71 for the overhaul of the inflatable harness assembly.
(3) Refer to CMM 35-13-71 for the overhaul of the mask assembly.
(4) Refer to CMM 35-13-71 for the overhaul of the microphone assembly.
(5) Refer to CMM 35-13-72 for the overhaul of the supply hose and radio cord
assembly.

SUBTASK 35-13-63-860-002-A01
C. Testing after an overhaul
(1) After an overhaul, do a full bench test (Refer to TESTING AND FAULT ISOLATION).

SUBTASK 35-13-63-860-003-A01
D. Identification of an overhaul
(1) Identify each overhaul of the Crew Oxygen Mask Regulator with a label, bonded on
the regulator, which indicates:
– the name of the approved repair facilities,
– the indication "OVERHAUL",
– the control stamp,
– the date.

Page 11001
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

THIS PAGE INTENTIONALLY LEFT BLANK

Page 11002
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

STORAGE

TASK 35-13-63-500-801-A01
1. STORAGE

A. Job Set-Up Information

WARNING : STRICTLY OBEY THE PROCEDURES FOR THE STORAGE AND

TRANSPORT OF OXYGEN EQUIPMENT. DO NOT USE OIL, GREASE
OR OTHER LUBRICANTS MADE FROM PETROL IN THE WORK AREA
OF THIS OXYGEN EQUIPMENT. THIS CAN CAUSE A DANGEROUS
FIRE HAZARD.

(1) Consumables
(a) Table 15001 gives the consumables necessary to the maintenance of the
component.
NOTE : You can use alternative for the listed items.
NOTE : Refer to SPECIAL TOOLS, FIXTURES, EQUIPMENT AND CON-
SUMABLES for full details.

REFERENCE NAME SOURCE

Local supply Polythene bag Local supply
Local supply Cardboard box Local supply
Local supply Cardboard or polystyrene Local supply
Local supply Adhesive tape Local supply
Local supply Desiccant Local supply
Local supply Transparent protection support Local supply

Table 15001 / STORAGE – MATERIALS

SUBTASK 35-13-63-620-001-A01
B. Preservation
(1) At the end of the test, fully wipe the external surfaces.
(2) Put the protective caps on the unit.
(3) Put the unit in a polythene bag of 0,2 mm (0.008 in.) minimum thickness. The bag
must be large enough to seal correctly.
(4) Remove as much air as possible from the bag and then use heat to seal it.
(5) Identify the packing with :
– Item identification label.
– Packing date label.

Page 15001
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.
 ZODIAC AEROTECHNICS
COMPONENT MAINTENANCE MANUAL
MC10 - SERIES

– "DO NOT OPEN UNTIL REQUIRED FOR USE" label.

SUBTASK 35-13-63-530-002-A01
C. Packing
(1) Put the component in its initial container. Use the initial material for the protection
of the component. Use bags of desiccant as necessary.
(2) If the initial container is not available:
(a) Refer to DESCRIPTION AND OPERATION for the weight of the component.
(b) Use a different container. Use only approved materials for the protection of
the component.
(c) Put the unit in a cardboard box with its related documents (check sheet,
log. card).
(d) Safety the unit and the document in the box (cardboard - polystyrene).
(e) Close the packing box and make the seals stronger with adhesive tape.
(f) Identify the packing with labels and protect them with a transparent material.
Make sure that :
1 The identification label has all the related data of the component.
2 You can read the labels easily.

SUBTASK 35-13-63-550-001-A01
D. Storage

CAUTION : MAKE SURE THAT THERE IS NOT TOO MUCH WEIGHT ON THE CON-
TAINER, IF YOU USE THE STACK STORAGE METHOD. TOO MUCH
WEIGHT ON THE CONTAINER CAN CAUSE DAMAGE TO THE COM-
PONENT.

CAUTION : DO NOT KEEP THE CONTAINER NEAR FLUIDS THAT CAN CAUSE
CORROSION OR DAMAGE, AND DO NOT KEEP NEAR SOURCES
THAT MAKE HEAT OR OZONE.

(1) Keep the container in a clean, dry room with a good supply of air.
(2) Keep the temperature of the room between 0 degree C and + 55 degree C (32
degree F to + 135 degree F). The recommended temperature is at or near 15
degree C (59 degree F).
(3) Keep the relative humidity at between 25 and 65 %.
(4) Put the containers where you can clearly read the identification label.

Page 15002
35-13-63 Oct 04/16
The data and information contained herein are proprietary to ZODIAC AEROTECHNICS. Copy and distribution to a third party are strictly forbidden. Printed in France.