Scribd
Upload
14 views3 pages

Weld Log Passenger Cabinet

The document is a Weld Information and Inspection Log created on January 18, 2024, with updates until February 5, 2024, detailing welding operations under work order number 443020-000. It includes specifications for welding consumables, thickness measurements, and inspection requirements, along with a table listing various welds, their materials, thicknesses, and inspection statuses. All welds listed have been approved and inspected according to relevant standards.

Uploaded by

brianh122712
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
14 views3 pages

Weld Log Passenger Cabinet

The document is a Weld Information and Inspection Log created on January 18, 2024, with updates until February 5, 2024, detailing welding operations under work order number 443020-000. It includes specifications for welding consumables, thickness measurements, and inspection requirements, along with a table listing various welds, their materials, thicknesses, and inspection statuses. All welds listed have been approved and inspected according to relevant standards.

Uploaded by

brianh122712
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Weld Information and Inspection Log

Date Created 1/18/2024 WORK ORDER NO. : 443020-000


Date Updated 2/5/2024
Drwg # - Rev 99001865330 rev.B UNIT NO. :

*The welding consumable requirement is based on EN ISO 14341, Section 4.2A, Table 1A and Section 4.3A, Table 2A.
**Thickness of weld refers to effective weld size. For fillet welds this is weldt throat thickness (EN 22553 "a" dimension).

APPROVED WELD
NDT IF REQUIRED
Inspect per AWS
SHIELDING GAS

INSPECTED BY

INSPECTED BY
PREPARATION

UNAPPROVED
D1.6 Table 8.1
WELD

(ARGON)
ITEM X ITEM Y TYPE AND SIGNATURE OF WELDER COMMENTS

WELD

WELD
TYPE

TYPE
WELDING ITEM X ITEM Y THICKNESS THICKNESS POSITION TO WELD AND DATE

QA
WELD NO SEQUENCE WPS NO MATERIAL MATERIAL ITEM X (inches) ITEM Y (inches) WELD IN SIZE WELDED
GST-GTAW-2mm-
1 N/A 1G1-301LN-304L 304ss 304ss 5 .12" 1 .08" 2F 2mm MECH 100% X
GST-GTAW-2mm-
2 N/A 1G1-301LN-304L 304ss 304ss 4 .12" 1 .08" 2F 2mm MECH 100% X
GST-GTAW-2mm-
3 N/A 1G1-301LN-304L 304ss 304ss 4 .12" 6 .12" 2F AND 1G 2mm MECH 100% X
GST-GTAW-2mm-
4 N/A 1G1-301LN-304L 304ss 304ss 14 1 .08" 1G 2mm MECH 100% X
GST-GTAW-2mm-
5 N/A 1G1-301LN-304L 304ss 304ss 11 .12" 1 .08" 1G 2mm MECH 100% X
GST-GTAW-2mm-
6 N/A 1G1-301LN-304L 304ss 304ss 7 .12" 1 .08" 2F 2mm MECH 100% X
GST-GTAW-2mm-
7 N/A 1G1-301LN-304L 304ss 304ss 7 .12" 6 .12" 2F AND 1G 2mm MECH 100% X
GST-GTAW-2mm-
8 N/A 1G1-301LN-304L 304ss 304ss 12 .12" 1 .08" 2F 2mm MECH 100% X
GST-GTAW-2mm-
9 N/A 1G1-301LN-304L 304ss 304ss 2 .12" 1 .08" 2F 2mm MECH 100% X
GST-GTAW-2mm-
10 N/A 1G1-301LN-304L 304ss 304ss 10 .12" 1 .08" 1G 2mm MECH 100% X
GST-GTAW-2mm-
11 N/A 1G1-301LN-304L 304ss 304ss 21 .08" 5 .12" 2F 2mm MECH 100% X
GST-GTAW-2mm-
12 N/A 1G1-301LN-304L 304ss 304ss 21 .08" 5 .12" 1G .08" MECH 100% X
GST-GTAW-2mm-
13 N/A 1G1-301LN-304L 304ss 304ss 21 .08" 5 .12" 1G .08" MECH 100% X
GST-GTAW-2mm-
14 N/A 1G1-301LN-304L 304ss 304ss 2 .12" 1 .08" 2F 2mm MECH 100% X
GST-GTAW-2mm-
15 N/A 1G1-301LN-304L 304ss 304ss 8 .12" 1 .08" 1G 2mm MECH 100% X
GST-GTAW-2mm-
16 N/A 1G1-301LN-304L 304ss 304ss 9 .12" 1 .08" 1G 2mm MECH 100% X

1
2
ITEM THK
1
2
3
4
5
6
7
8
9
10
11

You might also like