Document Reference
STARRT CARD STARRT CARD
NO.
NJC-HSE-PLN-043
(Safety Task Analysis Risk Reduction Talk)
COMPANY NAME: NEW JOB COMPANY PROJECT No.: KAFD00235
WORK LOCATION SUPERVISOR
/ AREA: COND. STARRT:
TASK DATE &
DESCRIPTION: TIME:
HAZARD CONTROL CHECK LIST
MOBILE N/A YES NO DEMOLITION WORK N/A YES NO
PLANT
Plant Inspection – Check List Blasting Operations – Permit
Reverse Beepers, Hooters & Rotating light HAND TOOLS N/A YES NO
Traffic Controllers / Flagman / Banksman Fit for Task & Good Condition
Barricading - Jersey / Traffic cones Home made tools removed
Man – v- Machine interface Hand tools tied down when working at height
PERMIT TO WORK N/A YES NO ELECTRICAL TOOL N/A YES NO
Hot work permit - Grinding. Welding, Oxy- Electrical cords & power tools checked and safe for
Fire use
Excavation Permit Non Conducting Tools used
Confined Space Permit Other?
NOC – Utility Services, etc.
Other?
EARTH WORKS / N/A YES NO ELECTRICAL INSTALLATIONS (GENSET; DB’s) N/A YES NO
EXCAVATIONS
Barricades – Flagging, Tape Live electr. System – Isolated (lock-out, Tag, Test)
Batters / Shoring / sloping / benching Residual Current Device (Trip Box)
Dust Control Equipment Earthed
Haul Roads HV Access Permit
Adequate access / egress ramps / stairs
provided Equipment / electrical Supply disconnected
Other? Hand tools tied down when working at height
NEW JOB COMPANY Document Reference
NJC-HSE-PLN-EX-23
Rev. No. Rev. Date
STARRT CARD
(Safety Task Analysis Risk Reduction Talk)
WORKING AT HEIGHTS N/A YES NO CIVIL N/A YES NO
Concrete pouring – PPE for task (gumboots; PVC
Trained Scaffolders & Scaffold Inspectors
gloves, dust masks)
Re-bar fixing / Mat installation – Provide double
Scaffolds – Knee rail, Handrails & toe boards scaffold walkways
Safety Harnesses – Employees trained Re-bar Caps
Double Lanyards / Inertia Reels Shuttering – Secured and tied down
Scaffold Certified Safe for use– Scafftags GENERAL N/A YES NO
Tie-off Points Identified Risk Assessments – Reviewed and current
Housekeeping – Work area clean and tidy / waste
ACCESS / EGRESS N/A YES NO
material removed
Ladders – secured; 1 to 4 ratio; 1.0 m above
landing Manual Handling / Ergonomics
Slip / trip hazards removed Heat Stress – Hydration Program followed
Communication – All concerned are informed
Routes sign posted
regarding this planned activity
Electr. Cables / hoses tied up / elevated where
possible Stacking – material properly stacked
MOBILE PLANT ENVIRONMENTAL N/A YES NO
Pre-start inspection conducted and completed Spill control - Spills kits required and available
Air Compressors – Inspected and safe for use Drip Trays – available and used during fueling
Generators – Inspected and safe for use –
Fire Extinguishers in place Hazardous Chemicals – MSDS available
Waste Disposal – Hazardous
LIFTING OPERATIONS N/A YES NO Waste Disposal – Non-Hazardous
Cranes / Heavy Lifts-Check List MANDATORY PPE N/A YES NO
Pinch Points Safety Shoes, Hard Hat & Coverall,
Crane – Inspected, Certificate valid Eye & Hand protection, Hearing Protection
Gloves – task specific as per RC “Glove Selection
Crane Operator – Operator Certificate valid Matrix.’
Rigger – Trained and Certified TASK BASED PPE N/A YES NO
Lifting Tackle – Inspected; Certificate valid Safety Harness – Double lanyard
Crane Positioning – Founding level and stable Respiratory protection / Dust Masks
Crane Outriggers – fully extended and locked Full Face Shield
Lifting area barricaded Welders Apron
Taglines – available and in use Elbow Length Gloves – Leather / PVC, Gum Boots
PPE issued to all workers/helpers that are exposed
REBAR PROTECTECTION(& tie-rod) N/A YES NO to hazard
Rebar capped, hooped, protected Other:
No. EMPLOYEE NAME SIGNATURE No. EMPLOYEE NAME SIGNATURE
1. 8.
2. 9.
3. 10.
4. 11.
5. 12.
6. 13.
7. 14.
CONDUCTED SUPERVISOR NAME AND SIGN:
REVIEWED BY:
