MEX-Road Blockers
Mechatronix-Road Blockers:
Road Blocker is used for controlling the access of vehicles to sensitive perimeter. MECHATRONIX” is
manufacturing Road Blockers since 2009. We have 400+ Installations of Road Blockers in all over Pakistan. Our
Robust Design for Road blocker with Crash Rating can be installed for maximum security and safety
applications.
The K12 crash rating designed wedge barrier deters traffic and is highly visible when in use. MEX Security aimed
blockers has been designed to suit various security needs.
Automatic (PLC Based), UHF Reader, Remote control, Under Vehicle Surveillance system can be easily
integrated with Road Blocker. The Road blocker dimensions can be according to site open clearance or as upon
client request.
Surface Mount
Categories
Delta Type
Safety & Security Features:
Crash Rated K-4, K-8, K-12 Certified Blocker
Heavy Duty Mechanism for MEX Security & Durability Reliable
Programmable (PLC Based) Control Panel
Compact Hydraulic unit with heavy duty motor, Solenoid Valves & Cylinder
Durable
Manual Hand Pump operation in case of Power failure
Durable & Corrosion Resistant - Red Oxide & Enamel Coating Finish
Robust
Flexibility to Integrate with wide Range of Access Control devices
Available with Accessories – Safety Loop Detectors, Push buttons,
Traffic Lights, Indication LEDs, Colored tough pavers etc.
Secure
Easy Installation & Low Maintenance
Weather Proof Control Cabinet will house all active hydraulic, electrical and
electronic component
Warranty & after Sale Service with Terms & Conditions
©Mechatronix - All Rights Reserved 01
MEX-Road Blockers
Product Specifications:
Material Mild Steel
Raised Height 600-1000 mm (Adjustable)
Axle Load Resistance 20 Tons
Power Requirement 3 Phase, 50-60 Hz
HCU Motor Heavy Duty motor, 5HP 400V
Structure Composite Fabricated Structure with Different Sizes of
Flange Beams, UPN Channels and Equal Angle Section 6 -
10mm
Operational Speed 4-6 Seconds
Top Chequered Plate Antiskid 10mm Thick Plates
Hydraulic Pump 14Litres Per Minute at 1400 RPM , Gear Type , Max 2800
RPM , Aluminum
Hydraulic Actuators 65mm External Diameter, 50mm Shaft Diameter, Synthetic
High Pressure Seals
Safety Valves & Gadgets Pressure Safety Valve , Set on 140 Bars and Manual Relieve
Valve
Maximum allowable piping between Pistons of At maximum 20 meter Required
Road blocker and Hydraulic system
Tank Size , Filters , Gauges 20-30 Liters , Oil Level, Suction and Breather Filter
Attached
Protection Relays Voltage overload/under load, Phase Protection Relay
Included, overcurrent protection through CB
Control Cabinet Weather Proof Control Cabinet will house all active
hydraulic, electrical and electronic component
Control Unit Industrial PLC Based Electronic Control Unit
Finish Red Oxide & Enamel Coating
Colored Tough pavers (Optional)
Product Description:
The Mex Road Blocker along with MEX security features there are safety loop detectors & light sensors for vehicle
safety. A heavy duty hydraulic system is best suitable for continuous operations.
According to the international standards Mechatronix Mex Blockers are Certified & tested K-Rated. The K-Rated
bollards are tested and proven to stop 15000 lb. Truck with impact Rate at 30, 40, 50 MPH. The K-Ratings are K-4,
K-8 & K-12.
The road blockers feature manual raising and lowering, and install flush to the finished roadway when retracted.
The Road blocker is operated with Hydraulic control unit. In case of power failure the blocker can be lifted or
lowered manually using hand pumps and valves.
It can be integrated with wide range of Biometric & Access control devices and control system. The internal
control panel is PLC based.
©Mechatronix - All Rights Reserved 02
MEX-Road Blockers
Models & Designs:
Surface Mount Delta Type
Applications:
High impact applications
Utility Buildings
Residential applications
Corporate Places
Frequent use applications
Educational centers & Embassies
Health care center
Commercial towers
©Mechatronix - All Rights Reserved 03
MEX-Road Blockers
Surface Mount Road Blocker :
Surface mounts are designed and installed on high security risk areas. The surface mount is a solution for quick
installation & low maintenance. The surface mounts are unique in design and highly secure solution. The Blocker
does not have any depth as its installation does not require heavy civil work.
Delta Type Road Blocker :
Delta type Road blockers are designed for permanent installation in a RCC foundation. The blocker is hydraulic
or pneumatic control that quickly raise or retract.
It is a crash Rated tested & certified solution to control heavy duty vehicle. The design & construction of Road
Blocker consist of heavy steel sections with mild steel skirts & covers. The top plate is checker sheet, anti-slip
plate to withstand an axle load of 15-20 tons.
The blocking segment shall be secured into a subsurface mounting frame and will be rotated through 35~ 43
degrees to secure the roadway. On impact, the forces exerted on the blocking segment should be partially
absorbed by the structure with the balance being transmitted through the substantial frame and into the re-
enforced foundations. The segment is designed to absorb / withstand impacts from small and large commercial
vehicles like, cars, van, SUV & and other higher chassis vehicle.
Segment Height
The height of the segment when in the closed (raised) position, as measured from the top of the mounting
frame, will be a minimum of 650mm (can be customized) to minimize the possibility of site penetration and to
ensure that higher chassis vehicles are restrained.
Segment Width
The nominal width of the blocking segment can be 4,000mm although this may be decreased and increased to a
maximum of 7,000mm. (Please note that it is not advisable to install units wider than 4,000mm due to the
significant risk of a security breach caused by the possibility of dual lane traffic flow.)
Finish
The segment and mounting frame are to be finished with an anti-corrosion paint in black with yellow, black with
white and Red with White diagonal stripes over-painted on the segments front skirt and road plate with highly
reflecting text of “STOP” on the front skirt.
©Mechatronix - All Rights Reserved 04
MEX-Road Blockers
Drawings & Dimensions :
©Mechatronix - All Rights Reserved 04
MEX-Road Blockers
Drawings & Dimensions :
Our Clients:
©Mechatronix - All Rights Reserved 04
MEX-Road Blockers
Product Gallery:
(+92) 051 4430 367-9 bsg@mechatronix.com.pk
Plot No 169, Street # 9, Industrial
©Mechatronix - All Rights Reserved. www.mechatronix.com.pk
Area, I-10/3, Islamabad 06
