60~75W Constant Current Mode LED Driver ELG-75-C series

IS 15885(Part 2/Sec13)
110 M M IP65 IP67
THOMAS SAMUEL
THOMAS SAMUEL

8 R-41027766
(for DA-Type only) Type HL
(for 700A/1050A only)

■ Features ■ Applications
Constant Current mode output LED street lighting
Metal housing design with functional Ground LED harbor lighting
Built-in active PFC function LED bay lighting
No load / Standby power consumption <0.5W LED greenhouse lighting
IP67 / IP65 rating for indoor or outdoor installations LED flood lighting
Function options: output adjustable via potentiometer; Type “HL” for use in Class I, Division 2
3 in 1 dimming (dim-to-off); Smart timer dimming; DAL I hazardous (Classified) location.
Typical lifetime>50000 hours
5 years warranty

■ Description
ELG-75-C series is a 75W LED AC/DC driver featuring the constant current mode and
high voltage output. ELG-75-C operates from 100~305VAC and offers models with different
rated current ranging between 350mA and 1400mA. Thanks to the high efficiency up to 91%,
with the fanless design, the entire series is able to operate for -40℃~+85℃ case temperature under
free air convection. The design of metal housing and IP67/IP65 ingress protection level allows
this series to fit both indoor and outdoor applications. ELG-75-C is equipped with various function
options, such as dimming methodologies, so as to provide the optimal design flexibility for LED
lighting system.

■ Model Encoding
ELG - 75 - C500 A -
{
Input wiring type
Function options
Blank:2-wire input for standard model
3Y:3-wire input for standard model
Rated output current (350/500/700/1050/1400mA)
Output wattage
Series name
Type IP Level Function Note
Blank IP67 Io fixed. In Stock
A IP65 Io adjustable through built-in potentiometer. In Stock
B IP67 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) In Stock
Io adjustable through built-in potentiometer &
AB IP65 In Stock
3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance)
DA IP67 DALI control technology. In Stock
Dx IP67 Built-in Smart timer dimming function by user request. By request
D2 IP67 Built-in Smart timer dimming and programmable function. In Stock
File Name:ELG-75-C-SPEC 2018-09-30
 60~75W Constant Current Mode LED Driver ELG-75-C series
SPECIFICATION
MODEL ELG-75-C350 ELG-75-C500 ELG-75-C700 ELG-75-C1050 ELG-75-C1400
RATED CURRENT 350mA 500mA 700mA 1050mA 1400mA
200VAC ~ 305VAC
74.9W 75W 74.9W 74.55W 75.6W
RATED POWER Note.5
100VAC ~ 180VAC
59.85W 60W 59.5W 59.85W 60.2W
CONSTANT CURRENT REGION Note.2 107 ~ 214V 75 ~ 150V 53 ~ 107V 35 ~ 71V 27 ~ 54V
OUTPUT
OPEN CIRCUIT VOLTAGE(max.) 224V 158V 114V 78V 61V
Adjustable for A/AB-Type only (via built-in potentiometer)
CURRENT ADJ. RANGE
175 ~ 350mA 250 ~ 500mA 350 ~ 700mA 525 ~ 1050mA 700 ~ 1400mA
CURRENT RIPPLE 5.0% max. @rated current
CURRENT TOLERANCE ±5.0%
SET UP TIME Note.4 500ms/115VAC,230VAC
100 ~ 305VAC 142 ~ 431VDC
VOLTAGE RANGE Note.3
(Please refer to "STATIC CHARACTERISTIC" section)
FREQUENCY RANGE 47 ~ 63Hz
PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load
POWER FACTOR (Typ.)
(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
THD< 20%(@load≧50%/115VC,230VAC; @load≧75%/277VAC)
TOTAL HARMONIC DISTORTION (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
INPUT
EFFICIENCY (Typ.) 91% 91% 90% 90% 90%
AC CURRENT (Typ.) 0.7A / 115VAC 0.45A / 230VAC 0.38A/277VAC
INRUSH CURRENT(Typ.) COLD START 50A(twidth=350μs measured at 50% Ipeak)/230VAC; Per NEMA 410
MAX. No. of PSUs on 16A
CIRCUIT BREAKER 5 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC

LEAKAGE CURRENT <0.75mA / 277VAC

NO LOAD / STANDBY No load power consumption <0.5W for Blank / A / Dx / D2-Type
POWER CONSUMPTION Standby power consumption <0.5W for B / AB / DA -Type
SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed
225 ~ 260V 160 ~ 190V 115 ~ 140V 80 ~ 100V 64 ~ 79V
PROTECTION OVER VOLTAGE Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE Shut down o/p voltage, re-power on to recover
WORKING TEMP. Tcase=-40 ~ +85℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP. Tcase=+85℃
WORKING HUMIDITY 20 ~ 95% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT ±0.03%/℃ (0 ~ 60℃)
VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
UL8750(type”HL”), CSA C22.2 No. 250.13-12;EN/AS/NZS 61347-1, EN/AS/NZS 61347-2-13 independent, EN62384;
SAFETY STANDARDS EAC TP TC 004;BIS IS15885(for 700A/1050A only);IP65 or IP67; GB19510.1, GB19510.14;
KC61347-1,KC61347-2-13 approved
DALI STANDARDS Compliance to IEC62386-101, 102, 207 for DA-Type only
SAFETY & WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC
EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
Compliance to EN55015,EN61000-3-2 Class C (@load≧50%) ; EN61000-3-3; GB17743, GB17625.1;
EMC EMISSION
EAC TP TC 020; KC KN15, KN61547
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(surge immunity:Line-Earth:6KV,Line-Line:4KV);
EMC IMMUNITY
EAC TP TC 020; KC KN15, KN61547
MTBF 1171.4K hrs min. Telcordia SR-332 (Bellcore) 305Khrs min. MIL-HDBK-217F (25℃)
OTHERS DIMENSION 180 * 6 3*35.5 mm (L*W*H)
PACKING 0.8Kg;16pcs/13.4Kg/0.67CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.
NOTE 2. Please refer to "DRIVING METHODS OF LED MODULE".
3. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
4. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
6. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 80℃ or less.
7. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com
8.The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
9. For any application note and IP water proof function installation caution, please refer our user manual before using.
https://www.meanwell.com/Upload/PDF/LED_EN.pdf
File Name:ELG-75-C-SPEC 2018-09-30
 60~75W Constant Current Mode LED Driver ELG-75-C series

BLOCK DIAGRAM

PFC fosc : 50~120KHz

PWM fosc : 60~130KHz

EMI FILTER PFC POWER RECTIFIERS Vo+

I/P & SWITCHING &
CIRCUIT Vo-
RECTIFIERS FILTER
O.L.P. DIM+
DIM-
(B Type)
O.T.P. O.L.P. DETECTION
PWM & PFC CIRCUIT
CONTROL

O.V.P.

CASE :Protective Earth

DRIVING METHODS OF LED MODULE

※ This series works in constant current mode to directly drive the LEDs.

In the constant current region, the highest voltage at the output of the driver
100 depends on the configuration of the end systems.

Constant Should there be any compatibility issues, please contact MEAN WELL.
Vo(%)

Current area

50
(min.)
Hiccup
Protection

50 100 Io(%)

Typical output current normalized by rated current (%)

File Name:ELG-75-C-SPEC 2018-09-30

 60~75W Constant Current Mode LED Driver ELG-75-C series

DIMMING OPERATION
※ 3 in 1 dimming function (for B/AB-Type)

DIM+( Gray )*
AC/N(Blue) DIM-(Black)**
AC/L(Brown) ELG-75-C Vo-(Blue)
Vo+(Brown)

* DIM+ for B/AB-Type

DA+ for DA-Type
PROG+ for D2-Type
Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: * *DIM- for B/AB-Type
DA- for DA-Type
0 ~ 10VDC, or 10V PWM signal or resistance. PROG- for D2-Type
Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
Dimming source current from power supply: 100μA (typ.)
◎ Applying additive 0 ~ 10VDC 100%
90%
80%
+
Vo+ + 70%

Output current (%)

60%
-
Vo- - 50%
DIM+ 40%
+
30%
Additive Voltage
- 20%
DIM-
10%

“DO NOT connect "DIM- to Vo-" 0%

0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V
Dimming input: Additive voltage

◎ Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz): 100%
90%
80%
+
Vo+ + 70%
Output current (%)

60%
-
Vo- - 50%
DIM+ 40%

Additive PWM signal 30%

20%
DIM-
10%

“DO NOT connect "DIM- to Vo-" 0%

0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Duty cycle of additive 10V PWM signal dimming input

◎ Applying additive resistance: 100%

90%
+ 80%
Vo+ +
70%
Output current (%)

- 60%
Vo- -
DIM+ 50%
40%
Additive Resistance
30%
DIM- 20%
10%
“DO NOT connect "DIM- to Vo-"
0%
Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N
(N=driver quantity for synchronized dimming operation )
Dimming input: Additive resistance
Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< I out<8%.
2. The output current could drop down to 0% when dimming input is about 0kΩ or 0Vdc, or 10V PWM signal with 0% duty cycle.

File Name:ELG-75-C-SPEC 2018-09-30

 60~75W Constant Current Mode LED Driver ELG-75-C series

※ DAL I Interface (primary side; for DA-Type)

Apply DALI signal between DA+ and DA-.
DAL I protocol comprises 16 groups and 64 addresses.
First step is fixed at 8% of output.
※ Smart timer dimming function (for Dxx-Type by User definition)
MEAN WELL Smart timer dimming primarily provides the adaptive proportion dimming profile for the output constant current level to perform up to 14
consecutive hours. 3 dimming profiles hereunder are defined accounting for the most frequently seen applications. If other options may be needed,
please contact MEAN WELL for details.

Ex : ◎ D01-Type: the profile recommended for residential lighting

Set up for D01-Type in Smart timer dimming software program:

T1 T2 T3 T4
Dimming Level(%)

TIME** 06:00 07:00 11:00 ---

LEVEL** 100% 70% 50% 70%

Operating Time(HH:MM)
**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level.
Example: If a residential lighting application adopts D01-Type, when turning on the power supply at 6:00pm, for instance:
[1] The power supply will switch to the constant current level at 100% starting from 6:00pm.
[2] The power supply will switch to the constant current level at 70% in turn, starting from 0:00am, which is 06:00 after the power supply turns on.
[3] The power supply will switch to the constant current level at 50% in turn, starting from 1:00am, which is 07:00 after the power supply turns on.
[4] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on.
The constant current level remains till 8:00am, which is 14:00 after the power supply turns on.

Ex: ◎ D02-Type: the profile recommended for street lighting

Set up for D02-Type in Smart timer dimming software program:

T1 T2 T3 T4 T5
Dimming Level(%)

TIME** 01:00 03:00 8:00 11:00 ---

LEVEL** 50% 80% 100% 60% 80%

Operating Time(HH:MM)
**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level.
Example: If a street lighting application adopts D02-Type, when turning on the power supply at 5:00pm, for instance:
[1] The power supply will switch to the constant current level at 50% starting from 5:00pm.
[2] The power supply will switch to the constant current level at 80% in turn, starting from 6:00pm, which is 01:00 after the power supply turns on.
[3] The power supply will switch to the constant current level at 100% in turn, starting from 8:00pm, which is 03:00 after the power supply turns on.
[4] The power supply will switch to the constant current level at 60% in turn, starting from 1:00am, which is 08:00 after the power supply turns on.
[5] The power supply will switch to the constant current level at 80% in turn, starting from 4:00am, which is 11:00 after the power supply turns on. The
constant current level remains till 6:30am, which is 14:00 after the power supply turns on.

File Name:ELG-75-C-SPEC 2018-09-30

 60~75W Constant Current Mode LED Driver ELG-75-C series

Ex: ◎ D03-Type: the profile recommended for tunnel lighting

Set up for D03-Type in Smart timer dimming software program:

Dimming Level(%)

T1 T2 T3

TIME** 01:30 11:00 ---

LEVEL** 70% 100% 70%

Operating Time(HH:MM)

**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level.
Example: If a tunnel lighting application adopts D03-Type, when turning on the power supply at 4:30pm, for instance:
[1] The power supply will switch to the constant current level at 70% starting from 4:30pm.
[2] The power supply will switch to the constant current level at 100% in turn, starting from 6:00pm, which is 01:30 after the power supply turns on.
[3] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on.
The constant current level remains till 6:30am, which is 14:00 after the power supply turns on.

File Name:ELG-75-C-SPEC 2018-09-30

 60~75W Constant Current Mode LED Driver ELG-75-C series

OUTPUT LOAD vs TEMPERATURE(Note.7)

100 100

80 80
230VAC 230VAC
input only input only
60 60
LOAD (%)

LOAD (%)
40 40

20 20

-40 -25 -10 0 15 30 50 60 70 (HORIZONTAL) -40 -25 0 20 45 55 65 75 85 (HORIZONTAL)

AMBIENT TEMPERATURE,Ta (℃) Tcase (℃)

STATIC CHARACTERISTIC POWER FACTOR (PF) CHARACTERISTIC

※ Tcase at 75℃
100
1
90 0.98
0.96
80
0.94

70 0.92 277V（75W）
0.9
PF

230V（75W）
60 0.88
LOAD (%)

115V（60W）
0.86
50
0.84

40 0.82
0.8
50% 60% 70% 80% 90% 100%
100 120 140 160 180 200 240 250 260 270 280 305

INPUT VOLTAGE (V) 60Hz LOAD

※ De-rating is needed under low input voltage.

TOTAL HARMONIC DISTORTION (THD) EFFICIENCY vs LOAD

ELG-75-C series possess superior working efficiency that up to 91% can
be reached in field applications.
※ 350mA Model,Tcase at 75℃ ※ 350mA Model, Tcase at 75℃

18% 94
16%
92
14%
EFFICIENCY(%)

90
12%
THD

277V（75W）
10% 88
230V（75W）
277V（75W）
8% 86
230V（75W） 115V（60W）
6%
115V（60W） 84
4%
82
2%
0% 80
50% 60% 70% 80% 90% 100% 50% 60% 70% 80% 90% 100%

LOAD LOAD

File Name:ELG-75-C-SPEC 2018-09-30

 60~75W Constant Current Mode LED Driver ELG-75-C series

LIFE TIME

120

100

80
LIFETIME(Kh)

60

40

20

0
20 30 40 50 60 70 80 90

Tcase ( ℃ )

File Name:ELG-75-C-SPEC 2018-09-30

 60~75W Constant Current Mode LED Driver ELG-75-C series

MECHANICAL SPECIFICATION
※ Blank-Type CASE NO.: 243A Unit:mm

180
169
300±20 156 300±20

45.8
63
AC/N(Blue) Vo-(Blue)
AC/L(Brown) Vo+(Brown)
85
SJOW 17AWGx2C tc SJOW 17AWGx2C
&H05RN-F 1.0mm 2 &H05RN-F 1.0mm 2
20
4-ψ4.5
tc : Max. Case Temperature

35.5
35

※ A-Type

180
169
300±20 156 300±20
45.8
63

AC/N(Blue) Vo-(Blue)
AC/L(Brown) Vo+(Brown)
85
SJOW 17AWGx2C tc SJOW 17AWGx2C
&H05RN-F 1.0mm 2 &H05RN-F 1.0mm 2
20

4-ψ4.5

tc : Max. Case Temperature

35.5
35
21

44.25

File Name:ELG-75-C-SPEC 2018-09-30

 60~75W Constant Current Mode LED Driver ELG-75-C series

※ AB-Type

180
169
300±20 156 300±20

SJOW 17AWGx2C
&H05RN-F 1.0mm 2

45.8
63
DIM+( Gray )
AC/N(Blue) DIM-(Black)
AC/L(Brown) Vo-(Blue)
85 Vo+(Brown)
SJOW 17AWGx2C tc
&H05RN-F 1.0mm 2 SJOW 17AWGx2C

20
&H05RN-F 1.0mm 2

4-ψ4.5

tc : Max. Case Temperature

35.5
35
21

44.25

※ B/DA/D2-Type

180
169
300±20 156 300±20

SJOW 17AWGx2C
&H05RN-F 1.0mm 2
45.8
63

DIM+( Gray )*
AC/N(Blue) DIM-(Black)**
AC/L(Brown) Vo-(Blue)
85 Vo+(Brown)
SJOW 17AWGx2C tc
&H05RN-F 1.0mm 2 SJOW 17AWGx2C
20

&H05RN-F 1.0mm 2 * DIM+ for B-Type

DA+ for DA-Type
4-ψ4.5 PROG+ for D2-Type
tc : Max. Case Temperature
* *DIM- for B-Type
DA- for DA-Type
PROG- for D2-Type
35.5
35

File Name:ELG-75-C-SPEC 2018-09-30

 60~75W Constant Current Mode LED Driver ELG-75-C series

※ 3Y Model (3-wire input)

180
169
300±20 156

45.8
63
AC/N(Blue)
AC/L(Brown)
PE (Green/Yellow) 85
SJOW 17AWGx3C tc SJOW 17AWGx2C
&H05RN-F 1.0mm 2 &H05RN-F 1.0mm 2

20
4-ψ4.5

tc : Max. Case Temperature

◎ Note1: Please connect the case to PE for the complete EMC deliverance and safety use.
◎ Note2: Please contact MEAN WELL for input wiring option with PE.

Installation Manual
Please refer to : http://www.meanwell.com/manual.html

File Name:ELG-75-C-SPEC 2018-09-30