Project1-RevB_BP_ITT_2012_revB:Project1-RevB_BP 4/9/19 12:37 PM Page 47

ECO Non-Adjustable Series Hydraulic Shock Absorbers

ECO Series
Standard Technical Data
ECO 8 ➞ ECO 100 Series
Non-Adjustable Series

ØD

ØG ØE1*

J
WL C
WF H
F
A
A1*

*Note: A1 and E1 apply to button models and urethane striker cap accessory. One Hex Jam Nut included with every shock absorber.

(ETE) (FP) Nominal Coil Spring Force (FD)

(S) (ET) Emergency (ETC) Max. Max. Model
Catalog No./ Stroke Max. Max. Max. Reaction Extended Compressed Propelling Weight
Model in. in.-lbs./cycle in.-lbs./cycle in.-lbs./hour Force lbs. lbs. lbs. Force lbs. oz.
(mm) (Nm/cycle) (Nm/cycle) (Nm/h) (N) (N) (N) (N) (g)
0.25 35 – 55,000 200 0.6 1.2 45 .5
ECO 8 (B) (6,4) (4,0) – (6 215) (890) (2,7) (5,6) (200) (16)
0.28 62 – 120,700 360 0.5 1.0 80 1.0
ECO 10 (B) (7,0) (7,0) – (13 640) (1 600) (2,2) (4,5) (350) (28)
0.41 106 220 275,000 450 0.7 1.6 50 2.0
ECO 15 (B) (10,4) (12,0) (25) (31 020) (2 000) (3,0) (7,0) (220) (56)
0.50 212 390 331,000 625 1.0 2.5 200 2.4
ECO S 25 (B) (12,7) (24,0) (44) (37 400) (2 800) (4,5) (11,0) (890) (68)
0.63 265 500 389,000 625 1.0 2.5 200 2.4
ECO 25 (B) (16,0) (30,0) (56) (44 000) (2 800) (4,5) (11,0) (890) (68)
0.50 285 560 440,000 850 1.5 3.5 360 3.0
ECO S 50 (B) (12,7) (32,0) (63) (49 720) (3 750) (6,0) (15,0) (1 600) (69)
0.88 550 975 523,000 850 2.0 6.8 360 4.8
ECO 50 (B) (22,0) (62,0) (110) (59 070) (3 750) (8,9) (30,0) (1 600) (136)
1.00 930 2210 681,500 1,250 3.0 6.0 500 10.5
ECO 100 (B) (25,0) (105,0) (250) (77 000) (5 500) (13,0) (27,0) (2 200) (297)
*Notes: Maximum energy rating for emergency use only. Estimated cycle life of 1-5 cycles if used at maximum emergency rating.

A A1 C D E1 F G H J WF WL
Catalog No./ Damping in. in. in. in. in. in. in. in. in. in. in.
Model Constant (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
ECO 8 IF (B) -1,-2,-3 3
/8 - 32 UNEF
ECO 8 MF (B) -1,-2,-3 1.86 2.25 M8 x 0,75 .10 0.27 1.61 .26 .18 .10 – –
(47,0) (57,0) (2,5) (6,8) (40,9) (6,6) (4,6) (2,5) – –
ECO 8 MC (B) -1,-2,-3 M8 x 1,0
ECO 10 IF (B) -1,-2,-3 2.12 2.51 /16 - 28 UNEF
7
.12 0.34 1.83 .34 .18 .13 – –
ECO 10 MF (B) -1,-2,-3 (54,0) (64,0) M10 x 1,0 (3,0) (8,6) (46,5) (8,6) (4,6) (3,3) – –
ECO 15 IF (B) -1,-2,-3,-4 /16 - 28 UNEF
7
2.45 2.85 .12 .40 2.10 .39 .27 .10 .39 .38
ECO 15 MF(B) -1,-2,-3,-4 M12 x 1,0
(62,2) (72,4) (3,0) (10,2) (52,1) (9,9) (6,9) (2,5) (11,0) (9,5)
ECO 15 IC (B) -1,-2,-3,-4 1
/2 - 20 UNEF
ECO S 25 MF (B) -1,-2,-3 3.25 3.63 M14 x 1,0 .16 0.44 2.74 .43 .20 .04 (12,0) .50
ECO S 25 IC (B) -1,-2,-3 (82,7) (92,2) /16 - 18 UNF
9
(4,0) (11,2) (69,5) (10,9) (5,1) (1,0) .50 (12,7)
ECO S 25 MC (B) -1,-2,-3 M14 x 1,5 (12,0)
ECO 25 IF (B) -1,-2,-3,-4 1
/2 - 20 UNF .44
ECO 25 MF (B) -1,-2,-3,-4 3.84 4.22 M14 x 1,0 .16 .44 3.20 .43 .30 .04 (12,0) .50
ECO 25 IC (B) -1,-2,-3,-4 (97,5) (107,2) /16 - 18 UNF
9
(4,0) (11,2) (81,3) (10,9) (7,6) (1,0) .50 (12,7)
ECO 25 MC (B) -1,-2,-3,-4 M14 x 1,5 (12,0)
ECO S 50 IF (B) -1,-2,-3 3.46 3.93 3
/4 - 16 UNF .19 0.50 2.93 .64 .30 .04 .68 .50
ECO S 50 MC (B) -1,-2,-3 (87,9) (99,9) M20 x 1,5 (4,8) (12,7) (74,4) (16,3) (7,6) (1,0) (18,0) (12,7)
ECO 50 IF (B) -1,-2,-3,-4 4.66 5.13 3
/4 - 16 UNF .19 0.50 3.76 .64 .30 .04 .68 .50
ECO 50 MC (B) -1,-2,-3,-4 (118,4) (130,3) M20 x 1,5 (4,8) (12,7) (95,5) (16,3) (7,6) (1,0) (18,0) (12,7)
ECO 100 IF (B) -1,-2,-3,-4 1-12 UNF
5.07 5.57 .25 0.62 4.04 .87 .50 .18 .88 .50
ECO 100 MF (B) -1,-2,-3,-4 M25 x 1,5
(128,8) (141,5) (6,4) (15,7) (102,6) (22,0) (12,7) (4,6) (23,0) (12,7)
ECO 100 MC (B) -1,-2,-3,-4 M27 x 3,0
Notes: 1. See page 54 for constant damping curves.

47 www.enidine.com Email: industrialsales@enidine.com Tel.: 1-800-852-8508 Fax: 1-716-662-0406