1 2 3 4 5 6 7 8

390
A A

122
B B

130 131

C C

147
436

D D

216

75
98 272
172
E 121 390 E

PRODUCT : DAJ DB/TPN/SURF

MATERIAL :- MODEL : DAJCO-DB
SURFACE FINISH :- POWDER COATING DATE : 21/05/2024
DIMENSIONS : mm
F SOFTWARE : INVENTOR
NOTE:-
DRAWN BY : AG
1) ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED.
2) ALL UNSPECIFIED TOLERANCE TO BSEN 22768 MEDIUM SERIES. CHECKED & APPROVED BY : AG SCALE :- 1 : 6 DRAWING NO.
3) ALL SHARP EDGE SHALL BE ROUNDED WITH RADIUS 1mm
A REVISION - A 21/05/2024 DEPARTMENT : R & D PROJECTION SHEET MIN-34G0100
4) "*" MARKED DIMENSION ARE CRITICAL FROM APPLICATION UNLESS OTHERWISE MENTIONED,
POINT OF VIEW. REV DESCRIPTION DATE 1 OF 1 ITEM CODE:- Rev. A A4
TOLERANCES TO BE `0.25mm
We reserve all rights of this drawing even in case of patent grant and registration of other industrial property rights reproduction. Conveyance of information to third parties and other unauthorized use are not permitted
 1 2 3 4 5 6 7 8

2
A 4 A
3

136

5
66

B B

C C
432

432

D D
216

5 LBL-081-018 A STICKER FOR DB, WHITE LABLE, INSTRUCTION FOR 1

OPERATION, SIZE- 18X13.5CM
4 DOR-34W0004 A W.A. OF DB DOOR - 436X390 1
3 RVT-011-011 A M3.2X6 BLIND ALUMINIUM STEEL RIVET 2
E 2 LBL-137-015 A DAKHEEL AL JASSSAR OVEL LOGO PLATE 1 E
20.8 1 LTH-054-001 DIRAK SLIDE LATCH PA, BLACK 1
272
SR.
DWG. NO. REV. PART DESCRIPTION QTY
No.

PRODUCT : DAJCO-DB/TPN/SURF
MATERIAL :- MODEL : DAJCO-DB
SURFACE FINISH :- NATURAL DATE : 29/04/2024
DIMENSIONS : mm
F SOFTWARE : INVENTOR ASSY. OF DB DOOR 436X390 F
NOTE:-
DRAWN BY : SPS
1) ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED.
2) ALL UNSPECIFIED TOLERANCE TO BSEN 22768 MEDIUM SERIES. CHECKED & APPROVED BY : AG SCALE :- 1 : 4 DRAWING NO.
3) ALL SHARP EDGE SHALL BE ROUNDED WITH RADIUS 1mm
A REVISION - A 02/05/2024 DEPARTMENT : R & D PROJECTION SHEET DOR-34G0004
4) "*" MARKED DIMENSION ARE CRITICAL FROM APPLICATION UNLESS OTHERWISE MENTIONED,
POINT OF VIEW. REV DESCRIPTION DATE 1 OF 1 ITEM CODE:- Rev. A A4
TOLERANCES TO BE `0.25mm
We reserve all rights of this drawing even in case of patent grant and registration of other industrial property rights reproduction. Conveyance of information to third parties and other unauthorized use are not permitted
 1 2 3 4 5 6 7 8

5
8

A A
7

17
8

133
B 29 B

68

C C

4
1

436
D D
5
150

8 SCW-146-157 A M4.2X12 SCREW S-TAPPING PHILIPS HEAD 4

7 LBL-00L021 A CIRCUIT LABEL FOR SMALL DISTRIBUTION BOARD TYPE-2 2
6 INC-34S0100 A PLUGIN DB INSIDE COVER 436X390 1
5 SC-OOR-1 A DAJCO RIGHT SIDE COVER 2
4 SC-OOL-1 A DAJCO LEFT SIDE COVER 2
E 65.5 3 LBL-081-015 A LOGO WARNING STICKER 1 E
1 ZB-HNG-3401 A DB HINGE-1 2
390
SR.
DWG. NO. REV. PART DESCRIPTION QTY
No.
PRODUCT :
MATERIAL :- MODEL : DAJ-DB PLUNGIN
SURFACE FINISH :- NATURAL DATE : 20/05/2024
DIMENSIONS : mm ITEM NAME.
F SOFTWARE : INVENTOR PLUGIN DB FRONT COVER ASSY 436X390 F
NOTE:-
DRAWN BY : AG
1) ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED.
2) ALL UNSPECIFIED TOLERANCE TO BSEN 22768 MEDIUM SERIES. CHECKED & APPROVED BY : AG SCALE :- 1 : 5 DRAWING NO.
3) ALL SHARP EDGE SHALL BE ROUNDED WITH RADIUS 1mm
A REVISION - A 02/05/2024 DEPARTMENT : R & D PROJECTION SHEET INC-34G0100
4) "*" MARKED DIMENSION ARE CRITICAL FROM APPLICATION UNLESS OTHERWISE MENTIONED,
POINT OF VIEW. REV DESCRIPTION DATE 1 OF 1 ITEM CODE:- Rev. A A4
TOLERANCES TO BE `0.25mm
We reserve all rights of this drawing even in case of patent grant and registration of other industrial property rights reproduction. Conveyance of information to third parties and other unauthorized use are not permitted
 1 2 3 4 5 6 7 8

3 RVT-128-005 A M3.2X8 BLIND STEEL RIVET 4 B.O.*

2 STD-011-002 A M6X20 FH-SELF CLINCHING STUDS 4 B.O.*
372 1 BDY-34S0004 A DB ENCLOSURE 436 X 390 X 98 MM 1 1.20 mm
A 9 A
SR.
DWG. NO. REV. PART DESCRIPTION QTY B.O. ITEMS THK
No.
83

2 1

B 370 B

C C

283.5
396

436
2

D D
76.3

E E
220 85 98
390
DEV. SIZE :- XN/AXN/A
PRODUCT : DAJCO-DB/TPN/SURF
MATERIAL :- ZINC COATED STEEL SHEET MODEL : DAJCO-DB
SURFACE FINISH :- POWDER COATING DATE : 16/05/2024
DIMENSIONS : mm ITEM NAME.
F SOFTWARE : INVENTOR STUD PRESSING OF DB ENCLOSURE 436X390 F
NOTE:-
DRAWN BY : SPS
1) ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED.
2) ALL UNSPECIFIED TOLERANCE TO BSEN 22768 MEDIUM SERIES. CHECKED & APPROVED BY : AG SCALE :- 1 : 5 DRAWING NO.
3) ALL SHARP EDGE SHALL BE ROUNDED WITH RADIUS 1mm
A REVISION - A 02/05/2024 DEPARTMENT : R & D PROJECTION SHEET BDY-34W0004
4) "*" MARKED DIMENSION ARE CRITICAL FROM APPLICATION UNLESS OTHERWISE MENTIONED,
POINT OF VIEW. REV DESCRIPTION DATE 1 OF 1 ITEM CODE:- Rev. A A4
TOLERANCES TO BE `0.25mm
We reserve all rights of this drawing even in case of patent grant and registration of other industrial property rights reproduction. Conveyance of information to third parties and other unauthorized use are not permitted
 1 2 3 4 5 6 7 8

A 3 A

96
89
5
1

B B

105 131
2

C C

147
153
321

7
D D

7 ELCB 4P ET A ELCB 4P EATON 1

159.1
6 SET0104A A SEAT FOR SINGLE RCCB (STD.) 1
5 BAK-34N0100 A BACK PLATE 1
92

2 NEUTRAL 04 A NEUTRAL ASSY, 4 WAY TPN W/BUSBAR 1

WAY TP SUPPORT
1 EARTH 04 WAY A EARTH ASSEMBLY - 4 WAYS TPN 1
E TP E
170.5 SR.
DWG. NO. REV. PART DESCRIPTION QTY
No.
341
DEV. SIZE :- XN/AXN/A
PRODUCT :
MATERIAL :- MODEL :
SURFACE FINISH :- DATE : 06/05/2024
DIMENSIONS : mm ITEM NAME.
F SOFTWARE : INVENTOR D/B 4 WAYS TPN, PLUGIN DAJCO F
NOTE:-
DRAWN BY : SPS
1) ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED.
2) ALL UNSPECIFIED TOLERANCE TO BSEN 22768 MEDIUM SERIES. CHECKED & APPROVED BY : SCALE :- 1 : 4 DRAWING NO.
3) ALL SHARP EDGE SHALL BE ROUNDED WITH RADIUS 1mm
A REVISION - A 02/05/2024 DEPARTMENT : R & D PROJECTION SHEET BAK-34G0100
4) "*" MARKED DIMENSION ARE CRITICAL FROM APPLICATION UNLESS OTHERWISE MENTIONED,
POINT OF VIEW. REV DESCRIPTION DATE 1 OF 1 ITEM CODE:- Rev. A A4
TOLERANCES TO BE `0.25mm
We reserve all rights of this drawing even in case of patent grant and registration of other industrial property rights reproduction. Conveyance of information to third parties and other unauthorized use are not permitted
 1 2 3 4 5 6 7 8

2 ZB-HNG-3402 A DB HINGE (F) 2 DAJ 2.000 mm

1 DOR-34S0004 A DB DOOR FOR ENC 436X390 1 1.20 mm
SR.
DWG. NO. REV. PART DESCRIPTION QTY B.O. ITEMS THK
A No. A
272
5.8

5.8
2

54.5
272
B 45.8 B
1 2

C C
432

295

432
D D
14
54.5

E E

DEV. SIZE :- XN/AXN/A

PRODUCT : DB
MATERIAL :- MODEL : DAJ-DB
SURFACE FINISH :- NATURAL DATE : 29/04/2024
DIMENSIONS : mm ITEM NAME.
F SOFTWARE : INVENTOR W.A. OF DB DOOR - 436X390 F
NOTE:-
DRAWN BY : SPS
1) ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED.
2) ALL UNSPECIFIED TOLERANCE TO BSEN 22768 MEDIUM SERIES. CHECKED & APPROVED BY : SCALE :- 1 : 5 DRAWING NO.
3) ALL SHARP EDGE SHALL BE ROUNDED WITH RADIUS 1mm
A REVISION - A 15/05/2024 DEPARTMENT : R & D PROJECTION SHEET DOR-34W0004
4) "*" MARKED DIMENSION ARE CRITICAL FROM APPLICATION UNLESS OTHERWISE MENTIONED,
POINT OF VIEW. REV DESCRIPTION DATE 1 OF 1 ITEM CODE:- Rev. A A4
TOLERANCES TO BE `0.25mm
We reserve all rights of this drawing even in case of patent grant and registration of other industrial property rights reproduction. Conveyance of information to third parties and other unauthorized use are not permitted
 1 2 3 4 5 6 7 8

124.6

175.6

237.1

275.6
289.8
302
A 469.3 A
2
272 449.6

384.2 A A

20.8
272
B B

247.4

3
1
221.9

C C

25.5
38.5
12.2
432

432
25.5

4
19.7
D 0 D

0
15.2

285.1
304.8
BEND ID BEND DIRECTION BEND ANGLE A n3.5 -1.2 DEEP 2
1 DOWN 90
2 DOWN 90
E 3 DOWN 90 E
4 DOWN 90

DEV. SIZE :- 1.20 mmX469.34 mmX304.79 mm

PRODUCT : DAJCO-DB/TPN/SURF
MATERIAL :- ZINC COATED STEEL SHEET MODEL : DAJCO-DB
SURFACE FINISH :- POWDER COATING DATE : 28/04/2024
DIMENSIONS : mm ITEM NAME.
F SOFTWARE : INVENTOR DB DOOR FOR ENC 436X390 F
NOTE:-
DRAWN BY : SPS
1) ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED.
2) ALL UNSPECIFIED TOLERANCE TO BSEN 22768 MEDIUM SERIES. CHECKED & APPROVED BY : AG SCALE :- 1 : 5 DRAWING NO.
3) ALL SHARP EDGE SHALL BE ROUNDED WITH RADIUS 1mm
A REVISION - A 08/05/2024 DEPARTMENT : R & D PROJECTION SHEET DOR-34S0004
4) "*" MARKED DIMENSION ARE CRITICAL FROM APPLICATION UNLESS OTHERWISE MENTIONED,
POINT OF VIEW. REV DESCRIPTION DATE 1 OF 1 ITEM CODE:- Rev. A A4
TOLERANCES TO BE `0.25mm
We reserve all rights of this drawing even in case of patent grant and registration of other industrial property rights reproduction. Conveyance of information to third parties and other unauthorized use are not permitted
 1 2 3 4 5 6 7 8

5.6
18

4.6
3.9

289.6
216.1
230.6
157.1
110.4

336.4
A A
432

4.5
B B

T(1:2) A
A
21.5

386 364.5
11

11
278.4

B 27 30.1 B
27

21.5
20.8
55 30.1
55

432
8
6

4
5

7
1

2
3
386 22 211.5
22.5
T
144.5
C C

72.5 A
A
153

B B

32
0

114.4
6
D D

199.9

246.9
432

432

0
10.3
36.4

65.3
85.2

361.5
381.4

410.3
436.5
446.7
6
47 BEND ID BEND DIRECTION BEND ANGLE A n4.3 -1.2 DEEP 4
1 DOWN 90
B n6 -1.2 DEEP 4
2 DOWN 23
72

3 DOWN 67
211.5

200

4 DOWN 90
5 UP 90
E 6 DOWN 23 E
7 UP 90
72.5

8 DOWN 67

DEV. SIZE :- 1.20 mmX432.00 mmX446.71 mm

PRODUCT : DAJ DB/TPN/SURF
MATERIAL :- ZINC COATED STEEL SHEET MODEL : DAJCO-DB
SURFACE FINISH :- POWDER COATING DATE : 28/04/2024
DIMENSIONS : mm ITEM NAME.
F SOFTWARE : INVENTOR PLUGIN DB INSIDE COVER 436X390 F
NOTE:-
DRAWN BY : SPS
1) ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED.
2) ALL UNSPECIFIED TOLERANCE TO BSEN 22768 MEDIUM SERIES. CHECKED & APPROVED BY : AG SCALE :- 1 : 5 DRAWING NO.
3) ALL SHARP EDGE SHALL BE ROUNDED WITH RADIUS 1mm
A REVISION - A 02/05/2024 DEPARTMENT : R & D PROJECTION SHEET INC-34S0100
4) "*" MARKED DIMENSION ARE CRITICAL FROM APPLICATION UNLESS OTHERWISE MENTIONED,
POINT OF VIEW. REV DESCRIPTION DATE 1 OF 1 ITEM CODE:- Rev. A A4
TOLERANCES TO BE `0.25mm
We reserve all rights of this drawing even in case of patent grant and registration of other industrial property rights reproduction. Conveyance of information to third parties and other unauthorized use are not permitted
 1 2 3 4 5 6 7 8

597.5
A A

KNOCK OUT

663.5 B B 3 B B
644.5 A A
390
15 15 548.7
A 4 9 2 A
B 547.4 547.4 B

98
C C

390

10
5

1
8
20

C C

220
C C
D
436

114.8 A 6 11 12 A
116.1

D A A D
7
18.9 B B B B
0

104.8

597.5
8.9

492.7

588.5
0
10 10
98
A n3.5 THRU 8
BEND ID BEND DIRECTION BEND ANGLE
E B n3.5 -1.2 DEEP 8 E
1 UP 90
2 UP 90 C n6 -1.2 DEEP 4
3 UP 90 D n6.5 -1.2 DEEP 1
4 UP 90
DEV. SIZE :- 1.20 mmX597.48 mmX663.48 mm
5 UP 90
6 UP 90 PRODUCT : DAJCO-DB/TPN/SURF
MATERIAL :- ZINC COATED STEEL SHEET 7 UP 90 MODEL : DAJCO-DB
SURFACE FINISH :- NATURAL 8 UP 90 DATE : 25/04/2024
9 UP 90 DIMENSIONS : mm
10 UP 90
F SOFTWARE : INVENTOR DB ENCLOSURE 436 X 390 X 98 MM F
NOTE:- 11 UP 90
DRAWN BY : SPS
1) ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED. 12 UP 90
2) ALL UNSPECIFIED TOLERANCE TO BSEN 22768 MEDIUM SERIES. CHECKED & APPROVED BY : AG SCALE :- 1 : 8 DRAWING NO.
3) ALL SHARP EDGE SHALL BE ROUNDED WITH RADIUS 1mm
A REVISION - A 25/04/2024 DEPARTMENT : R & D PROJECTION SHEET BDY-34S0004
4) "*" MARKED DIMENSION ARE CRITICAL FROM APPLICATION UNLESS OTHERWISE MENTIONED,
POINT OF VIEW. 1 OF 1 ITEM CODE:- Rev. A A4
REV DESCRIPTION DATE TOLERANCES TO BE `0.25mm
We reserve all rights of this drawing even in case of patent grant and registration of other industrial property rights reproduction. Conveyance of information to third parties and other unauthorized use are not permitted
 1 2 3 4 5 6 7 8

351.4
A A

331.4 325.3
325.3 B B
307.7
A A
7

6.1
A
A

341
B A A B

7
5
A A A A A
341 97.2
18.5

60.5 220 A A
7
C 117 C
24.2 B B
A A A
5.2 6.1
0

345.3
6.1

351.4
65.7

285.7
77

0
BEND ID BEND DIRECTION BEND ANGLE
283.5

D D
321

5 DOWN 90
7 DOWN 90
11 DOWN 90
12 DOWN 90

A n3.2 -1 DEEP 16
88

97

B n7 -1 DEEP 4
61.3
9

E E

112 58.5 58.5

DEV. SIZE :- 1.00 mmX331.40 mmX351.40 mm
PRODUCT : DAJCO-DB/TPN/SURF
MATERIAL :- ZINC COATED STEEL SHEET MODEL : DAJCO-DB
SURFACE FINISH :- POWDER COATING DATE : 01/05/2024
DIMENSIONS : mm
F SOFTWARE : INVENTOR BACK PLATE F
NOTE:-
DRAWN BY : SPS
1) ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED.
2) ALL UNSPECIFIED TOLERANCE TO BSEN 22768 MEDIUM SERIES. CHECKED & APPROVED BY : AG SCALE :- 1 : 5 DRAWING NO.
3) ALL SHARP EDGE SHALL BE ROUNDED WITH RADIUS 1mm
A REV-A 20/05/2024 DEPARTMENT : R & D PROJECTION SHEET BAK-34S0100
4) "*" MARKED DIMENSION ARE CRITICAL FROM APPLICATION UNLESS OTHERWISE MENTIONED,
POINT OF VIEW. REV DESCRIPTION DATE 1 OF 1 ITEM CODE:- Rev. A A4
TOLERANCES TO BE `0.25mm
We reserve all rights of this drawing even in case of patent grant and registration of other industrial property rights reproduction. Conveyance of information to third parties and other unauthorized use are not permitted
 1 2 3 4 5 6 7 8

BEND ID BEND DIRECTION BEND ANGLE

1 UP 90
2 DOWN 90
A 3 DOWN 90 A
4 UP 90

35
A n5 -1 DEEP 2
A A
17.5

1
0

0
7
14.1

44.2

116.3

146.4
153.4
160.4
B B

15
15

C C

32

32
74

4mm RIB - 2 Nos

FOR EACH BEND
D D
35

35
17.5

32
88
E 102 E

DEV. SIZE :- 1.00 mmX35.00 mmX160.40 mm

PRODUCT : DB
MATERIAL :- ZINC COATED STEEL SHEET MODEL : TPN/SURF/MODEL-D
SURFACE FINISH :- POWDER COATING DATE : 21/05/2024
DIMENSIONS : mm
F SOFTWARE : INVENTOR
NOTE:-
DRAWN BY : AG
1) ALL DIMENSIONS ARE IN MM UNLESS OTHERWISE SPECIFIED.
2) ALL UNSPECIFIED TOLERANCE TO BSEN 22768 MEDIUM SERIES. CHECKED & APPROVED BY : AG SCALE :- 1 : 1.5 DRAWING NO.
3) ALL SHARP EDGE SHALL BE ROUNDED WITH RADIUS 1mm
A REVISION - A 02/05/2024 DEPARTMENT : R & D PROJECTION SHEET SET0104A
4) "*" MARKED DIMENSION ARE CRITICAL FROM APPLICATION UNLESS OTHERWISE MENTIONED,
POINT OF VIEW. REV DESCRIPTION DATE 1 OF 1 ITEM CODE:- Rev. A A4
TOLERANCES TO BE `0.25mm
We reserve all rights of this drawing even in case of patent grant and registration of other industrial property rights reproduction. Conveyance of information to third parties and other unauthorized use are not permitted