Section 1 - Engine

Section 1B - Aux. Emission Control Devices

M16A
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
EVAP System Components:M16A
Fasteners Information
K14C
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
EVAP System Components:K14C
Fasteners Information
D16AA
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
EGT sensor-1 45 4.6 33.5 icon
EGT sensor-2 45 4.6 33.5 icon
EGT sensor-3 45 4.6 33.5 icon
EGT sensor-4 45 4.6 33.5 icon
A/F sensor-1 45 4.6 33.5 icon
A/F sensor-2 45 4.6 33.5 icon
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Fasteners Information
Section 1C - Engine Electrical Devices
M16A
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
Accelerator pedal icon
5.5 0.56 4.0
assembly nut
Accelerator pedal icon
13 1.3 9.5
assembly bracket nut
ECT sensor 13 1.3 9.5 icon
HO2S-1 45 4.6 33.5 icon
HO2S-2 45 4.6 33.5 icon
Knock sensor bolt 23 2.3 17.0 icon
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Fasteners Information
K14C
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
Accelerator pedal icon
5.5 0.56 4.0
assembly nut
Accelerator pedal icon
13 1.3 9.5
assembly bracket nut
MAP sensor bolt 11 1.1 8.5 icon
Oil temperature sensor 25 2.5 18.5 icon
ECT sensor 12 1.2 9.0 icon
HO2S-1 45 4.6 33.5 icon
HO2S-2 45 4.6 33.5 icon
CMP sensor bolt 11 1.1 8.5 icon
CKP sensor bolt 11 1.1 8.5 icon
Knock sensor bolt 23 2.3 17.0 icon
MAF sensor with IAT icon
1.2 0.12 1.0
sensor-1 screw
Boost pressure sensor icon
11 1.1 8.5
with IAT sensor-2 bolt
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Fasteners Information
D16AA
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
Glow plug 8.0 0.82 6.0 icon
APP sensor assembly icon
5.5 0.56 4.0
nut
APP sensor bracket icon
13 1.3 9.5
bolt
CMP sensor bolt 9.0 0.92 7.0 icon
CKP sensor bolt 9.0 0.92 7.0 icon
VDOP solenoid valve icon
8.0 0.82 6.0
bolt
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Fasteners Information
Section 1D - Engine Mechanical
M16A
NOTE:
For fastener(s) with * (asterisk) below, refer to the
specified procedure in “Repair Instructions”.
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
Air cleaner outlet hose icon
1.3 0.13 1.0
No.1 clamp bolt
Air cleaner outlet hose icon
3.1 0.32 2.5
No.2 clamp bolt
Air cleaner suction icon
11 1.1 8.5
pipe bolt
IMT valve actuator icon
10 1.0 7.5
bolt
Cylinder head cover 3.0 N·m → 5.0 N·m icon
bolt* → 7.5 N·m (0.31
kgf-m → 0.51 kgf-
m→ 0.76 kgf-m, 2.5
lbf-ft → 4.0 lbf-ft →
5.5 lbf-ft)
PCV valve 27 2.8 20.0 icon
Engine left mounting icon
55 5.6 40.5
No.1 bracket bolt*
Engine harness ground icon
11 1.1 8.5
bolt
Engine right mounting icon
55 5.6 40.5
bolt
Engine right mounting icon
55 5.6 40.5
nut
Engine right mounting icon
70 7.1 52.0
nut
Engine left mounting icon
55 5.6 40.5
No.2 bracket bolt
Engine left mounting icon
55 5.6 40.5
No.2 bracket nut
Battery ground cable icon
25 2.5 18.5
bolt
Timing chain cover icon
25 2.5 18.5
bolt*
Timing chain cover icon
25 2.5 18.5
nut*
Oil gallery pipe No.2 icon
11 1.1 8.5
bolt
Oil gallery pipe No.3 icon
11 1.1 8.5
bolt
Crankshaft pulley bolt 150 15.3 111.0 icon
OCV mounting nut 11 1.1 8.5 icon
Oil gallery pipe No.1 icon
30 3.1 22.5
bolt*
Flywheel bolt 76 7.7 56.0 icon
Drive plate bolt 75 7.6 55.5 icon
Timing chain guide icon
9.0 0.92 7.0
bolt
Timing chain icon
25 2.5 18.5
tensioner bolt
Timing chain icon
11 1.1 8.5
tensioner adjuster bolt
Camshaft housing 5.0 N·m → 11 N·m icon
bolt* (0.51 kgf-m → 1.1
kgf-m, 4.0 lbf-ft →
8.5 lbf-ft)
VVT actuator bolt 59 6.0 43.5 icon
Cylinder head bolt icon
25 2.5 18.5
(M8)
Cylinder head bolt 20 N·m → 40 N·m icon
(M10)* → +60° → +60°
(2.0 kgf-m → 4.1
kgf-m → +60° →
+60°, 15.0 lbf-ft →
29.5 lbf-ft → +60°
→+60°)
Connecting rod bolt* 15 N·m → +45° → icon
+45° (1.5 kgf-m →
+45° → +45°, 11.0
lbf-ft → +45° →
+45°)
Venturi plug 3.5 0.36 2.5 icon
Sensor plate bolt 11 1.1 8.5 icon
Main bearing cap 30 N·m → 50 N·m icon
No.1 bolt* → +60° (3.1 kgf-m
→ 5.1 kgf-m
→+60°, 22.5 lbf-ft
→ 37.0 lbf-ft
→+60°)
Main bearing cap icon
25 2.5 18.5
No.2 bolt
Engine rear crankshaft icon
11 1.1 8.5
oil seal housing bolt
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Air Cleaner Components:M16A
Throttle Body and Intake Manifold Components:M16A
Cylinder Head Cover Components:M16A
Engine Mounting Components:M16A
Timing Chain Cover Components:M16A
Timing Chain and Chain Tensioner Components:M16A
Camshaft, Tappet and Shim Components:M16A
Valve and Cylinder Head Components:M16A
Piston, Piston Ring, Connecting Rod and Cylinder
Components:M16A
Main Bearing, Crankshaft and Cylinder Block
Components:M16A
Fasteners Information
K14C
NOTE:
For fastener(s) with * (asterisk) below, refer to the
specified procedure in “Repair Instructions”.
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
Vacuum pump bolt 25 2.5 18.5 icon
Turbocharger bolt 55 5.6 40.5 icon
Turbocharger nut 55 5.6 40.5 icon
Turbocharger inlet air icon
12 1.2 9.0
pipe bolt
Turbocharger inlet air icon
29 3.0 21.5
pipe bracket bolt
Turbocharger outlet icon
12 1.2 9.0
air pipe bolt
Oil drain joint bolt 11 1.1 8.5 icon
Turbocharger oil icon
intake pipe union bolt 18 1.8 13.5
No.1
Turbocharger oil icon
intake pipe union bolt 18 1.8 13.5
No.2
Turbocharger water icon
23 2.3 17.0
inlet pipe union bolt
Turbocharger water icon
23 2.3 17.0
outlet pipe union bolt
Cylinder head cover 5.0 N·m → 7.5 N·m icon
bolt No.1* (0.51 kgf-m → 0.76
kgf-m, 4.0 lbf-ft →
5.5 lbf-ft)
Cylinder head cover 5.0 N·m → 10 N·m icon
bolt No.2* (0.51 kgf-m → 1.0
kgf-m, 4.0 lbf-ft →
7.5 lbf-ft)
Engine harness ground icon
11 1.1 8.5
bolt
Engine left mounting icon
55 5.6 40.5
nut
Engine left mounting icon
55 5.6 40.5
bolt
Engine right mounting icon
90 9.2 66.5
nut
Engine right mounting icon
90 9.2 66.5
bolt
Battery ground cable icon
25 2.5 18.5
bolt
Timing chain cover icon
25 2.5 18.5
bolt No.1*
Timing chain cover icon
25 2.5 18.5
bolt No.2*
Water pump / icon
generator drive belt 45 4.6 33.5
tensioner pulley bolt
Crankshaft pulley bolt 150 15.3 111.0 icon
OCV bolt 11 1.1 8.5 icon
Flywheel bolt* 20 N·m → +34° (2.0 icon
kgf-m → +34°, 15.0
lbf-ft → +34°)
Drive plate bolt 75 7.6 55.5 icon
Timing chain guide icon
9.0 0.92 7.0
No.1 bolt
Timing chain icon
11 1.1 8.5
tensioner adjuster bolt
Timing chain guide icon
11 1.1 8.5
No.2 bolt
Camshaft housing bolt 5.0 N·m → 8.0 N·m icon
No.1* → 11 N·m (0.51 kgf-
m → 0.82 kgf-m →
1.1 kgf-m, 4.0 lbf-ft
→ 6.0 lbf-ft → 8.5
lbf-ft)
Camshaft housing bolt 5.0 N·m → 8.0 N·m icon
No.2* → 11 N·m (0.51 kgf-
m → 0.82 kgf-m →
1.1 kgf-m, 4.0 lbf-ft
→ 6.0 lbf-ft → 8.5
lbf-ft)
Camshaft intake rear 5.0 N·m → 8.0 N·m icon
housing bolt* → 11 N·m (0.51 kgf-
m → 0.82 kgf-m →
1.1 kgf-m, 4.0 lbf-ft
→ 6.0 lbf-ft → 8.5
lbf-ft)
VVT actuator bolt 60 6.1 44.5 icon
Exhaust camshaft icon
60 6.1 44.5
timing sprocket bolt
Thermostat case nut 25 2.5 18.5 icon
Cylinder head bolt* 15 N·m → 30 N·m icon
→ +70° → +65°
(1.5 kgf-m → 3.1
kgf-m → +70° →
+65°, 11.0 lbf-ft →
22.5 lbf-ft → +70°
→ +65°)
Connecting rod bolt* 20 N·m → 0 N·m → icon
25 N·m → +55° (2.0
kgf-m → 0 kgf-m →
2.5 kgf-m → +55°,
15.0 lbf-ft → 0 lbf-ft
→ 18.5 lbf-ft →
+55°)
Breather plate bolt icon
11 1.1 8.5
No.1
Breather plate bolt icon
11 1.1 8.5
No.2
Piston cooling jet bolt 11 1.1 8.5 icon
Sensor plate screw 11 1.1 8.5 icon
Main bearing cap 20 N·m → 40 N·m icon
bolt* → +60° (2.0 kgf-m
→ 4.1 kgf-m
→+60°, 15.0 lbf-ft
→ 29.5 lbf-ft
→+60°)
Oil seal housing bolt 11 1.1 8.5 icon
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Air Cleaner Components:K14C
Intercooler Components:K14C
Turbocharger Components:K14C
Cylinder Head Cover Components:K14C
Engine Mounting Components:K14C
Timing Chain Cover Components:K14C
Timing Chain and Chain Tensioner Components:K14C
Camshaft Components:K14C
Valve and Cylinder Head Components:K14C
Piston, Piston Ring, Connecting Rod and Cylinder
Components:K14C
Main Bearing, Crankshaft and Cylinder Block
Components:K14C
Fasteners Information
D16AA
NOTE:
For fastener(s) with * (asterisk) below, refer to the
specified procedure in “Repair Instructions”.
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
Injector bracket nut 25 2.5 18.5 icon
Inlet throttle valve icon
10 1.0 7.5
bolt
Vacuum pump bolt 11 1.1 8.5 icon
EGR-1 valve bolt* 6.0 N·m → 10 N·m icon
(0.62 kgf-m → 1.0
kgf-m, 4.5 lbf-ft →
7.5 lbf-ft)
EGR-1 valve icon
28 2.9 21.0
mounting bolt
EGR-1 valve icon
28 2.9 21.0
mounting nut
EGR cooler bracket icon
56 5.7 41.5
bolt
EGR cooler pipe bolt 10 1.0 7.5 icon
EGR-2 valve bracket icon
10 1.0 7.5
bolt
EGR cooler nut 10 1.0 7.5 icon
EGR-2 valve bolt 10 1.0 7.5 icon
EGR cooler clamp 13 1.3 9.5 icon
Exhaust manifold nut* 19 1.9 14.0 icon
Oil return pipe No.1 icon
10 1.0 7.5
bolt
Oil return pipe No.2 icon
28 2.9 21.0
bolt
Turbocharger 15 N·m → 27 N·m icon
lubrication pipe No.1 (1.5 kgf-m → 2.8
bolt* kgf-m, 11.0 lbf-ft →
20.0 lbf-ft)
Turbocharger 10 N·m → 20 N·m icon
lubrication pipe No.2 (1.0 kgf-m → 2.0
bolt* kgf-m, 7.5 lbf-ft →
15.0 lbf-ft)
Engine right mounting icon
93 9.5 68.5
bolt
Engine right mounting icon
93 9.5 68.5
nut
Engine left mounting icon
bracket bolt (M/T 55 5.6 40.5
model)
Engine left mounting icon
bracket bolt (Twin 93 9.5 68.5
clutch system model)
Engine left mounting icon
55 5.6 40.5
bracket nut
Timing belt idler icon
26 2.7 19.5
pulley bolt icon
Timing belt tensioner icon
26 2.7 19.5
bolt icon
Camshaft housing icon
15 1.5 11.0
plug
Oil pump bolt 9.0 0.92 7.0 icon
Engine right mounting icon
50 5.1 37.0
bracket bolt (M10)
Engine right mounting icon
26 2.7 19.5
bracket bolt (M8)
Crankshaft pulley bolt 30 3.1 22.5 icon
Intake manifold nut* 26 2.7 19.5 icon
Camshaft housing icon
26 2.7 19.5
bolt*
Camshaft gear bolt* 31 N·m → +40° (3.2 icon
kgf-m → +40°, 23.0
lbf-ft → +40°)
Camshaft pulley bolt* 30 N·m → +40° (3.1 icon
kgf-m → +40°, 22.5
lbf-ft → +40°)
Oil filler tube bolt 9.0 0.92 7.0 icon
Cylinder head bolt* 66 N·m → +90° → icon
+90° → +90° (6.7
kgf-m → +90° →
+90° → +90°, 49.0
lbf-ft → +90° →
+90° → +90°)
Connecting rod 25 N·m → +60° (2.5 icon
bearing cap bolt* kgf-m → +60°, 18.5
lbf-ft → +60°)
Crankshaft main 25 N·m → +100° icon
bearing cap bolt* (2.5 kgf-m → +100°,
18.5 lbf-ft → +100°)
Rear oil seal bolt 9.0 0.92 7.0 icon
Flywheel bolt (M/T icon
160 16.3 118.0
model)
Flywheel bolt (Twin 20 N·m → +50° (2.0 icon
clutch system model) kgf-m → +50°, 15.0
lbf-ft → +50°)
Timing belt tensioner icon
50 5.1 37.0
support bolt
Crankshaft timing belt icon
340 34.7 251.0
pulley bolt
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Air Cleaner Components:D16AA
Intercooler Components:D16AA
EGR Valve Components:D16AA
Turbocharger Components:D16AA
Engine Mounting Components:D16AA
Timing Belt and Belt Tensioner Components:D16AA
Intake Manifold Components:D16AA
Camshaft Housing Assembly Components:D16AA
Valve and Cylinder Head Assembly
Components:D16AA
Piston, Piston Ring, Connecting Rod and Cylinder
Components:D16AA
Main Bearing, Crankshaft and Cylinder Block
Components:D16AA
Fasteners Information
Section 1E - Engine Lubrication System
M16A
NOTE:
For fastener(s) with * (asterisk) below, refer to the
specified procedure in “Repair Instructions”.
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
Engine oil drain plug 35 3.6 26.0 icon
Oil filter stand 22 2.2 16.5 icon
Oil filter 14 1.4 10.5 icon
Oil pressure switch 13 1.3 9.5 icon
Oil pressure switch icon
11 1.1 8.5
cover bolt
Oil pan baffle plate icon
11 1.1 8.5
bolt
Oil pump strainer bolt 11 1.1 8.5 icon
Oil pan bolt (M6)* 11 1.1 8.5 icon
Oil pan nut* 11 1.1 8.5 icon
Oil pan bolt (M10)* 55 5.6 40.5 icon
Transaxle bolt 55 5.6 40.5 icon
Clutch housing lower icon
11 1.1 8.5
plate bolt
Oil pump rotor plate icon
11 1.1 8.5
bolt
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Oil Pan and Oil Pump Strainer Components:M16A
Oil Pump Assembly Components:M16A
Fasteners Information
K14C
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
Engine oil drain plug 35 3.6 26.0 icon
Oil filter 14 1.4 10.5 icon
Oil pressure switch 13 1.3 9.5 icon
Oil cooler bolt 20 2.0 15.0 icon
Oil filter stand 18 1.8 13.5 icon
Oil pan baffle plate icon
11 1.1 8.5
stud bolt
Oil pan baffle plate icon
11 1.1 8.5
bolt
Oil pump strainer bolt 11 1.1 8.5 icon
Oil pan baffle plate icon
11 1.1 8.5
nut
Oil pan bolt No.1 11 1.1 8.5 icon
Oil pan bolt No.2 11 1.1 8.5 icon
Transaxle bolt 55 5.6 40.5 icon
Oil pump rotor plate icon
11 1.1 8.5
bolt
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Oil Cooler Components:K14C
Oil Pan and Oil Pump Strainer Components:K14C
Oil Pump Assembly Components:K14C
Fasteners Information
D16AA
NOTE:
For fastener(s) with * (asterisk) below, refer to the
specified procedure in “Repair Instructions”.
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
Engine oil drain plug 20 2.0 15.0 icon
Oil filter cover 30 3.1 22.5 icon
Oil pressure switch-1 icon
26 2.7 19.5
icon
Oil pressure switch-2 icon
20 2.0 15.0
icon
Heat exchanger No.1 icon
45 4.6 33.5
bolt
Oil pan bolt (M6)* 9.0 0.92 7.0 icon
Oil pan bolt (M8)* 25 2.5 18.5 icon
Oil pump bolt 9.0 0.92 7.0 icon
Crankshaft timing belt icon
340 34.7 251.0
pulley bolt
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Heat Exchanger No.1 Components:D16AA
Oil Pan and Oil Pump Strainer Components:D16AA
Oil Pump Components:D16AA
Fasteners Information
Section 1F - Engine Cooling System
M16A
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
Radiator cooling fan icon
6.3 0.64 5.0
nut
Radiator cooling fan icon
3.9 0.40 3.0
motor bolt
Radiator cooling fan icon
2.6 0.27 2.0
motor cover bolt
Radiator support icon
59 6.0 43.5
member bolt
Water pump bolt 25 2.5 18.5 icon
Water pump nut 25 2.5 18.5 icon
Water pump pulley icon
20 2.0 15.0
bolt
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Cooling System Components:M16A
Fasteners Information
K14C
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
Thermostat cap bolt 11 1.1 8.5 icon
Radiator cooling fan icon
3.9 0.40 3.0
motor bolt
Radiator cooling fan icon
6.3 0.64 5.0
nut
Radiator cooling fan icon
6.3 0.64 5.0
bolt
Radiator support icon
59 6.0 43.5
member bolt
Water pump bolt 25 2.5 18.5 icon
Water pump nut 25 2.5 18.5 icon
Water pump pulley icon
20 2.0 15.0
bolt
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Cooling System Components:K14C
Fasteners Information
D16AA
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
Thermostat bolt 8.0 0.82 6.0 icon
Cooling fan mounting icon
7.1 0.7 5.5
bolt
Radiator cooling fan icon
6.3 0.64 5.0
nut
Radiator cooling fan icon
3.9 0.40 3.0
bolt
Radiator cooling fan icon
3.9 0.40 3.0
motor bolt
Radiator support icon
59 6.0 43.5
member bolt
Water pump bolt 26 2.7 19.5 icon
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Cooling System Components:D16AA
Fasteners Information
Section 1G - Fuel System
M16A
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
Fuel tank filler clamp 1.5 0.15 1.5 icon
Fuel delivery pipe bolt 25 2.5 18.5 icon
Fuel tank bolt 45 4.6 33.5 icon
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Fuel System Components:M16A
Fuel Hose Disconnection and Reconnection:M16A
Fasteners Information
K14C
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
Fuel tank filler clamp 1.5 0.15 1.5 icon
High pressure pipe icon
33 3.4 24.5
union nut
High pressure fuel icon
13 1.3 9.5
pump bolt
Fuel delivery pipe bolt 25 2.5 18.5 icon
Fuel tank bolt 45 4.6 33.5 icon
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Fuel System Components:K14C
Fuel Hose Disconnection and Reconnection:K14C
Fasteners Information
D16AA
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
Fuel tank filler clamp 1.5 0.15 1.5 icon
Bleed screw 1.0 0.10 1.0 icon
High pressure pipe icon
union nut (fuel
23 2.3 17.0
injector side and high
pressure pump side)
High pressure pipe icon
union nut (common 19 1.9 14.0
rail side)
Fuel injector bracket icon
25 2.5 18.5
nut
Common rail bolt 26 2.7 19.5 icon
High pressure pump icon
26 2.7 19.5
nut
High pressure pump icon
26 2.7 19.5
mounting No.2 bolt
High pressure pump icon
25 2.5 18.5
mounting No.1 bolt
High pressure pump icon
26 2.7 19.5
mounting No.3 bolt
High pressure pump icon
50 5.1 37.0
pulley nut
Fuel pressure sensor 70 7.1 52.0 icon
Fuel tank bolt 45 4.6 33.5 icon
Fuel filter fastener 30 3.1 22.5 icon
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Fuel Hose Disconnection and Reconnection:D16AA
Fuel System Components:D16AA
Fasteners Information
Section 1H - Ignition System
M16A
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
Spark plug 25 2.5 18.5 icon
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Fasteners Information
K14C
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
Spark plug 18 1.8 13.5 icon
Ignition coil bolt 11 1.1 8.5 icon
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Fasteners Information
Section 1I - Starting System
M16A
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
Starting motor cable icon
11 1.1 8.5
nut
Brush holder screw 3.4 0.35 2.5 icon
End housing bolt 6.1 0.62 4.5 icon
Magnetic switch icon
5.9 0.60 4.5
screw
Lead wire nut 11 1.1 8.5 icon
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Starting Motor Components (Non-ENG A-STOP
Model):M16A
Fasteners Information
K14C
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
Starting motor cable icon
11 1.1 8.5
nut
Brush holder screw 3.4 0.35 2.5 icon
End housing bolt 6.1 0.62 4.5 icon
Magnetic switch icon
5.9 0.60 4.5
screw
Lead wire nut 11 1.1 8.5 icon
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Starting Motor Components (Non-ENG A-STOP
Model):K14C
Fasteners Information
D16AA
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
Starting motor mount icon
25 2.5 18.5
bolt
Magnetic switch lead icon
6.0 0.61 4.5
wire nut
Starting motor cable icon
11 1.1 8.5
nut
Closure cap screw 1.6 0.16 1.5 icon
Starter end frame bolt icon
(Non-
7.5 0.76 5.5 ENG A-
STOP
model)
Starter end frame bolt icon
(ENG A-
4.8 0.49 3.5
STOP
model)
Magnetic switch bolt 7.5 0.76 5.5 icon
Lead wire nut 9.0 0.92 7.0 icon
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Starting Motor Components:D16AA
Fasteners Information
Section 1J - Charging System
M16A
NOTE:
For fastener(s) with * (asterisk) below, refer to the
specified procedure in “Repair Instructions”.
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
Battery bracket bolt 23 2.3 17.0 icon
Battery tray bolt 8.8 0.90 6.5 icon
Battery band bolt 23 2.3 17.0 icon
Generator adjuster icon
25 2.5 18.5
bolt
Pivot bolt icon
48 4.9 35.5
icon
Generator bolt icon
25 2.5 18.5
icon
“B” terminal nut 11 1.1 8.5 icon
Generator bracket bolt icon
(with tensioner 25 2.5 18.5
pulley)*
Tensioner pulley bolt 45 4.6 33.5 icon
Bearing retainer screw 2.3 0.23 2.0 icon
Stator assembly bolt 6.0 0.61 4.5 icon
Pulley nut 130 13.3 96.0 icon
Brush holder assembly icon
2.0 0.20 1.5
screw
Rear end cover bolt 4.5 0.46 3.5 icon
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Generator Components:M16A
Fasteners Information
K14C
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
Battery bracket bolt 23 2.3 17.0 icon
Battery tray bolt 8.8 0.90 6.5 icon
Battery band bolt 23 2.3 17.0 icon
Generator bolt 25 2.5 18.5 icon
Generator pivot bolt 48 4.9 35.5 icon
“B” terminal nut 11 1.1 8.5 icon
Water pump / icon
generator drive belt 45 4.6 33.5
tensioner pulley bolt
Bearing retainer screw 2.3 0.23 2.0 icon
Stator assembly bolt 6.0 0.61 4.5 icon
Pulley nut 130 13.3 96.0 icon
Brush holder assembly icon
2.0 0.20 1.5
screw
Rear end cover bolt 4.5 0.46 3.5 icon
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Generator Components:K14C
Fasteners Information
D16AA
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
Tensioner bolt 50 5.1 37.0 icon
Idler bolt 28 2.9 21.0 icon
Generator bolt 70 7.1 52.0 icon
“B” terminal nut 10 1.0 7.5 icon
IC regulator screw 2.0 0.20 1.5 icon
IC regulator nut 2.0 0.20 1.5 icon
“B” terminal inner nut 3.6 0.37 3.0 icon
Pulley 80 8.2 59.0 icon
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Generator Components:D16AA
Fasteners Information
Section 1K - Exhaust System
M16A
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Exhaust System Components:M16A
Fasteners Information
K14C
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Exhaust System Components:K14C
Fasteners Information
D16AA
NOTE:
For fastener(s) with * (asterisk) below, refer to the
specified procedure in “Repair Instructions”.
Tightening torque
Fastening part Note
N·m kgf-m lbf-ft
DPF® bracket nut* 5.0 N·m → 25 N·m icon
(0.51 kgf-m → 2.5
kgf-m, 4.0 lbf-ft →
18.5 lbf-ft)
DPF® clamp* 5.0 N·m → 25 N·m icon
(0.51 kgf-m → 2.5
kgf-m, 4.0 lbf-ft →
18.5 lbf-ft)
EGR lower pipe 9.0 N·m → 11 N·m icon
clamp* (0.92 kgf-m → 1.1
kgf-m, 7.0 lbf-ft →
8.5 lbf-ft)
Reference:
For the tightening torques of fasteners not specified in
this page, refer to:
Exhaust System Components:D16AA
Fasteners Information