Memoskop C-E, Keyboard emulation
Memoskop C-E with part no. 44 07 669:
Use the Memoskop service program for settings. (Included in the LOG BOOK)
Memoskop C-E with part no. 44 66 322:
There is no keyboard for SIREMOBIL Compact with Memoskop C-E.
However, for replacing the Memoskop C-E or for changes in configuration,
a keyboard is needed.
In these cases, the keyboard must be emulated with the help of the service PC and
the program TERMINAL.EXE, delivered with the WINDOWS 3.1 / 3.11 software package.
The adapter, mounted on the keyboard jack of the
Memoskop C-E must always be used.
Leave this adapter (part no. 31 00 380) on the SIREMOBIL Compact.
Because the codes behind the service PC cursor keys are different to the
Memoskop Keyboard codes behind the cursor keys, the function keys of the
program TERMINAL.EXE must be activated and programmed.
Proceed as follows:
Terminal Emulation:
• Turn on the service PC and start WINDOWS.
• Start the program TERMINAL.EXE.
• Select the menu "Settings". (deutsch: "Einstellungen"
• Select the menu "Terminal emulation".
• Select "DEC VT-100 (ANSI)".
• Close the menu
Terminal Preferences:
• Select the menu "Settings" (deutsch: "Einstellungen"')
• Select the menu "Terminal Preferences". (deutsch:"Terminal-Einstellungen")
• Select "Translations" none.
• Select "IBM to ANSI" yes. (mark it with "x")
• Close the menu.
Communication:
• Select the menu "Settings" (deutsch "Einstellungen")
• Select the menu "Communications". (deutsch:"Datenόbertragung")
• Select "Baud Rate" 9600.
• Select "Data Bits" 8
• Select "Stop Bits" 1.
• Select "Parity" none.
• Select "Flow Control" Xon / Xoff.
• Select the port used. (Com1 / Com2...)
Function keys:
• Select the menu "Settings" (deutsch: "Einstellungen"
• Select the menu "Function Keys". (deutsch: "Funktionstasten")
• Select "Keys Visible" yes. (deutsch: "Tasten anzeigen")
• Enter the following text to the datafields:
Key Name: Command: Remarks
F1: Cursor UP ALT 149 (see Notice)
F2: Cursor DOWN ALT 132 (see Notice)
F3: Cursor LEFT ALT 140 (see Notice)
F4: Cursor RIGHT ALT 146 (see Notice)
F5: HOME ALT 151 (see Notice)
F6: NEXT PAT ALT 142 (see Notice)
F7: ALL PAT ALT 143 (see Notice)
F8: TEXT ALT 148 (see Notice)
• Close the window.
Notice: As example: ALT 149 means, press the (*CTRL+) ALT - key,
hold it down and enter then 1 and 4 and 9.
Release then the (*CTRL+) ALT - key. A special character will be
displayed and this character represents the necessary code.
(in this example for cursor up)
For SIEMENS NIXDORF service PCs with no separate Num Keys:
The NUM LOCK key must be active.
Press the ALT - key, hold it down, press the FN - key and hold it down,
enter then 1 (= J) and 4 (=K) and 9 (=9) and release then all keys.
For other service PCs, we refer to the service PC user manual and
the Windows 3.1 / 3.11 user manual.
* necessary with some service PC΄s
Save settings:
• Select the menu "File".
• Select the menu "Save as" and store the settings in a file.
The function keys (selectable with the mouse) will be displayed on the bottom side
of the program TERMINAL.EXE and will emulate the cursor keys and
special function keys , necessary for settings of the Memoskop C-E.
See also Memoskop, configuration to the number of existing monitors.
See also Memoskop video frequency configuration,
See also Memoskop parameters overview.
Go to Contents view
