ISSN (Online) 2581-9429
IJARSCT
International Journal of Advanced Research in Science, Communication and Technology (IJARSCT)
International Open-Access, Double-Blind, Peer-Reviewed, Refereed, Multidisciplinary Online Journal
Impact Factor: 7.301 Volume 3, Issue 3, May 2023
Title of Research Paper
OR
"Just Sent the WORD File, We will format it
according to our Template"
Author1, Author2, Author3
Designation, Department, College, City, Country 1
Designation, Department, College, City, Country 2
Designation, Department, College, City, Country 3
Abstract: This document gives formatting instructions for authors preparing papers for publication in the International
Journal. The authors must follow the instructions given in the document for the papers to be published. You can use
this document as both an instruction set and as a template into which you can type your own text.
Keywords: Include at least 4 keywords or phrases
I. INTRODUCTION
This document is a template. An electronic copy can be downloaded from the website. For questions on paper
guidelines, please contact the International Journal committee as indicated on the Journal website. Information about
final paper submission is available from the website.
II. PAGE LAYOUT
An easy way to comply with the Journal paper formatting requirements is to use this document as a template and
simply type your text into it.
A. Page Layout
Your paper must use a page size corresponding to A4 which is 210mm (8.27") wide and 297mm (11.69") long. The
margins must be set as follows:
Top = 19mm (0.75")
Bottom = 43mm (1.69")
Left = Right = 14.32mm (0.56")
Your paper must be in single column format with a space of 4.22mm (0.17") between columns.
III. PAGE STYLE
All paragraphs must be indented. All paragraphs must be justified, i.e. both left-justified and right-justified.
A. Text Font of Entire Document
The entire document should be in Times New Roman or Times font. Type 3 fonts must not be used. Other font types
may be used if needed for special purposes.
Recommended font sizes are shown in Table 1.
B. Title and Author Details
Title must be in 24 pt Regular font. Author name must be in 11 pt Regular font. Author affiliation must be in 10 pt
Italic. Email address must be in 9 pt Courier Regular font.
Copyright to IJARSCT DOI: 10.48175/568 1
www.ijarsct.co.in
ISSN (Online) 2581-9429
IJARSCT
International Journal of Advanced Research in Science, Communication and Technology (IJARSCT)
International Open-Access, Double-Blind, Peer-Reviewed, Refereed, Multidisciplinary Online Journal
Impact Factor: 7.301 Volume 3, Issue 3, May 2023
All title and author details must be in single-column format and must be centered. Every word in a title must be
capitalized except for short minor words such as “a”, “an”, “and”, “as”, “at”, “by”, “for”, “from”, “if”, “in”, “into”,
“on”, “or”, “of”, “the”, “to”, “with”.
Author details must not show any professional title (e.g. Managing Director), any academic title (e.g. Dr.) or any
membership of any professional organization (e.g. Senior Member IEEE).
To avoid confusion, the family name must be written as the last part of each author name (e.g. John A.K. Smith).
Each affiliation must include, at the very least, the name of the company and the name of the country where the author
is based (e.g. Causal Productions Pty Ltd, Australia).
TABLE I
FONT SIZES FOR PAPERS
Font Size Appearance (in Time New Roman or Times)
Regular Bold Italic
10 table caption (in Small Caps),
figure caption,
8 reference item reference item (partial)
10 author address (in Courier), abstract body abstract heading (also in
cell in a table Bold)
10 level-1 heading (in Small Caps), level-2 heading,
paragraph level-3 heading,
author affiliation
10 author name
24 title
C. Figures and Tables
Figures and tables must be centered in the column. Large figures and tables may span across both columns. Any table
or figure that takes up more than 1 column width must be positioned either at the top or at the bottom of the page.
Graphics must not use stipple fill patterns because they may not be reproduced properly. Please use only SOLID FILL
colors which contrast well both on screen and on a black-and-white hardcopy, as shown in Fig. 1.
Fig. 1 A sample line graph using colors which contrast well both on screen and on a black-and-white hardcopy
Fig. 2 shows an example of a low-resolution image which would not be acceptable, whereas Fig. 3 shows an example
of an image with adequate resolution. Check that the resolution is adequate to reveal the important detail in the figure.
Copyright to IJARSCT DOI: 10.48175/568 2
www.ijarsct.co.in
ISSN (Online) 2581-9429
IJARSCT
International Journal of Advanced Research in Science, Communication and Technology (IJARSCT)
International Open-Access, Double-Blind, Peer-Reviewed, Refereed, Multidisciplinary Online Journal
Impact Factor: 7.301 Volume 3, Issue 3, May 2023
Please check all figures in your paper both on screen and on a black-and-white hardcopy. When you check your paper
on a black-and-white hardcopy, please ensure that:
the colors used in each figure contrast well,
the image used in each figure is clear,
all text labels in each figure are legible.
D. Figure Captions
Figures must be numbered using Arabic numerals. Figure captions must be in 8 pt Regular font. Captions of a single
line (e.g. Fig. 2) must be centered whereas multi-line captions must be justified (e.g. Fig. 1). Captions with figure
numbers must be placed after their associated figures, as shown in Fig. 1.
E. Table Captions
Tables must be numbered using uppercase Roman numerals. Table captions must be centred and in 8 pt Regular font
with Small Caps. Captions with table numbers must be placed before their associated tables, as shown in Table 1.
F. Page Numbers, Headers and Footers
Page numbers, headers and footers must not be used.
Fig. 2. Example of an unacceptable low-resolution image
Fig. 3. Example of an image with acceptable resolution
G. Links and Bookmarks
All hypertext links and section bookmarks will be removed from papers during the processing of papers for publication.
If you need to refer to an Internet email address or URL your paper, you must type out the address or URL fully in
Regular font.
H. References
The heading of the References section must not be numbered. All reference items must be in 8 pt font. Please use
Regular and Italic styles to distinguish different fields as shown in the References section. Number the reference items
Copyright to IJARSCT DOI: 10.48175/568 3
www.ijarsct.co.in
ISSN (Online) 2581-9429
IJARSCT
International Journal of Advanced Research in Science, Communication and Technology (IJARSCT)
International Open-Access, Double-Blind, Peer-Reviewed, Refereed, Multidisciplinary Online Journal
Impact Factor: 7.301 Volume 3, Issue 3, May 2023
consecutively in square brackets (e.g. [1]). When referring to a reference item, please simply use the reference number,
as in [2].
Examples of reference items of different categories shown in the References section include:
example of a book in [1]
example of a book in a series in [2]
example of a journal article in [3]
example of a conference paper in [4]
example of a patent in [5]
example of a website in [6]
IV. CONCLUSION
The version of this template is V2. Most of the formatting instructions in this document have been compiled by Causal
Productions from the IEEE LaTeX style files. Causal Productions offers both A4 templates and US Letter templates
for LaTeX and Microsoft Word. The LaTeX templates depend on the official IEEEtran.cls and IEEEtran.bst files,
whereas the Microsoft Word templates are self-contained.
V. ACKNOWLEDGMENT
The heading of the Acknowledgment section and the References section must not be numbered. Causal Productions
wishes to acknowledge Michael Shell and other contributors for developing and maintaining the IEEE LaTeX style
files which have been used in the preparation of this template.
REFERENCES
[1]. S. M. Metev and V. P. Veiko, Laser Assisted Microtechnology, 2nd ed., R. M. Osgood, Jr., Ed. Berlin,
Germany: Springer-Verlag, 1998.
[2]. J. Breckling, Ed., The Analysis of Directional Time Series: Applications to Wind Speed and Direction, ser.
Lecture Notes in Statistics. Berlin, Germany: Springer, 1989, vol. 61.
[3]. S. Zhang, C. Zhu, J. K. O. Sin, and P. K. T. Mok, “A novel ultrathin elevated channel low-temperature poly-Si
TFT,” IEEE Electron Device Lett., vol. 20, pp. 569–571, Nov. 1999.
[4]. M. Wegmuller, J. P. von der Weid, P. Oberson, and N. Gisin, “High resolution fiber distributed measurements
with coherent OFDR,” in Proc. ECOC’00, 2000, paper 11.3.4, p. 109.
[5]. R. E. Sorace, V. S. Reinhardt, and S. A. Vaughn, “High-speed digital-to-RF converter,” U.S. Patent 5 668 842,
Sept. 16, 1997.
Copyright to IJARSCT DOI: 10.48175/568 4
www.ijarsct.co.in
