ACTION ENGINEERS
Address : VADODARA
Tel : +91 9712578788 Fax no :
Mail id : info@actionengineers.com Website : http://www.actionengineers.com
Certificate No : 14131-75 Date of Issue : -- Page 1 of 3
Calibration Date : 06-Jan-2025 Next Calibration Date : ____To be decided by User
Certificate of Calibration
Customer Name and Test
Address : Test
Customer Reference : --
Receipt Entry No : --
Test Item : GO/NOGO Thread Plug Gauge M12 x 1.5 - 6H
Identity Number : 14131-75
Make : BAKER
Serial Number : --
Item Condition : Usable
Ref. No : 1
Equipment Details and Length Measuring machine LMM Gold Make - Octagon.
Traceability : Tracaeble to National / International Standards through NABL accredited lab
No. CC 2656 vide Certificate No. :-CGIL/2018/0911/E-001 dated
11/09/2018.
Master Details and Traceability : Set Of Thread Measuring Wire Set : Dia. 0.17 - 6.35 mm
Sr No. L-38813
Length Measuring machine LMM Gold Make - Octagon, Sr. No.:- 013.
Traceable to National / International Standards through NABL accredited lab
No. LAB/10/02 vide Certificate No. :- PG-201808/414 dated : 31/08/2018
Measurement Uncertainty : ± 0.003mm , At 95.45% Confidence Leve,K=2
Temperature : 20± 2°C
Relative Humidity : 50 ± 10%
Calibration Procedure : CP-03
Above all calibration result is measured by as per standard.
CALIBRATED BY APPROVED BY
Sangram Patil Stamped Seal 1
1 1
Format No. : -- ULR No. : --
ACTION ENGINEERS
Address : VADODARA
Tel : +91 9712578788 Fax no :
Mail id : info@actionengineers.com Website : http://www.actionengineers.com
Certificate No : 14131-75 Date of Issue : -- Page 2 of 3
Calibration Date : 06-Jan-2025 Next Calibration Date : ____To be decided by User
Certificate of Calibration
Nominal Value : M12 x 1.5 - 6H
Standard Used : Metric screw thread M (ISO 68-1, ISO 965, DIN 13, ASME 1.13M)
ISO 1502:1996, JIS B 0251:2006 , IS 2334:2001
Best Wire Diameter : 0.8660 mm
Used Wire Diameter : 0.8950 mm
Measuring Method : Three Wire Method
Gauge Nominal Value GO Side [mm] NO GO Side [mm]
Effective Diameter min value : 11.0325 11.2160
Effective Diameter max value : 11.0435 11.2270
Effective Diameter wear limit : 11.0205 11.2100
Major Diameter min value : 12.0010 11.5105
Major Diameter max value : 12.0230 11.5325
Minor Diameter max value : 10.1595 10.1595
I) Mechanical Calibration
1) Dimension - (Basic Instruments, Gauges)
Effective Diameter of Go Side
Measured Plane Measured Number Measured Value [mm] Effective Dia [mm] Tolerance Value
Number
1 1 12.4228 11.0368 | - - - -x- - - - - - |
CALIBRATED BY APPROVED BY
Sangram Patil Stamped Seal 1
1 1
Format No. : -- ULR No. : --
ACTION ENGINEERS
Address : VADODARA
Tel : +91 9712578788 Fax no :
Mail id : info@actionengineers.com Website : http://www.actionengineers.com
Certificate No : 14131-75 Date of Issue : -- Page 3 of 3
Calibration Date : 06-Jan-2025 Next Calibration Date : ____To be decided by User
Certificate of Calibration
Effective Diameter of NoGo Side
Measured Plane Measured Number Measured Value [mm] Effective Dia [mm] Tolerance Value
Number
1 1 12.6115 11.2255 | - - - - - - - - -x- |
Major Diameter of Go Side
Measured Plane Measured Number Measured Value [mm] Tolerance Value
Number
1 1 12.0123 | - - - - -x- - - - - |
Major Diameter of NoGo Side
Measured Plane Measured Number Measured Value [mm] Tolerance Value
Number
1 1 11.5157 | - -x- - - - - - - - |
Comments : No Comments
CALIBRATED BY APPROVED BY
Sangram Patil Stamped Seal 1
1 1
Format No. : -- ULR No. : --
