For the latest prices, please check AutomationDirect.com.
1-800-633-0405
Timers for all Applications
Operation mode selector
Fuji multi-mode timers with full
features
Operation mode indication window
Power on indication (Green)
Ease of use: As the time range is adjusted, the corresponding
display changes.
Output indication (Red)
Full functionality: Up to four output modes can be selected simply
with the turn of a screw. All outputs contain 5A, DPDT relays.
LED indicators
Time unit indication window
Miniature DIN timers are
small and accurate
Timing range
Time unit selector Small size: Under one inch wide.
selector Easy operation: A simple dial allows easy setup for the operator.
Koyo digital timers: powerful but Accuracy: The timer will perform its timing function with repeatable
accuracy of +/- 1% of the setting.
easy to use
This full-function timer has all the bells and whistles,
including full programmability: Current value
LED (red)
Timing ranges and modes: Seconds to hours time ranges Output
with decimal selection and up and down timing modes LED (red)
accommodate a wide range of applications. Set value
LED (red)
Output modes: Five output modes, from on-delay to Protection
LED (red)
one-shot, use a reliable 2A relay to operate the controlled Preset value
device. LED (green)
Tamper-proof: Key protection can be set for individual RST key Digit keys
keys to prevent unintentional changes by the operator.
ST7P Series MS4S Series KT-V4S Series
Manual dial
4-digit green LED display for time setting
Manual dial Time setting
4-Digit red LED display for current time
Display Time setting Power LED indicator
Output LED indicator
Output LED indicator Output LED indicator
Programming indicators
Output mode setting
Input Power 100-120 VAC or 24 VDC 100-240 VAC or 24 VDC/AC 85-260 VAC or 10-26 VDC
Reset signal
Start signal
Start signal
Inputs Timed signal Reset signal
Gate signal
Timed signal
Timed signal
Normally-open DPDT Normally-open DPDT 1 SPDT
Outputs
Normally-closed DPDT Normally-closed DPDT DC NPN transistor
Mechanical: 2 A @ 220 VAC
Contact Rating 3 A @ 240 VAC (resistive load) 5 A @ 250 VAC (resistive load)
Transistor: 100 mA @ 24 VDC
On-delay
On-delay
Flicker
Flicker
Output Modes On-delay One shot
One shot
Off-delay
Off-delay
Accumulation
Time Ranges 0.4 seconds to 60 minutes 0.05 seconds to 60 hours 0.001 seconds to 999.9 hours
Enclosure Rating NEMA 1 NEMA 1 IP65 - faceplate
Agency Approvals UL/CSA/CE/TUV UL/CSA/CE/TUV UL/CSA/CE
www.automationdirect.com Relays and Timers tREL-72
For the latest prices, please check AutomationDirect.com.
1-800-633-0405
Fuji 1/16 DIN Super Timers
Overview MS4SM Series
• Multi-mode timer with mode indication. On- • Timing units in selectable ranges of 0.1s, sec, min
The MS4S series super timers are 1/16 delay (PO), flicker (FL), one-shot (OS), or signal and hrs
DIN style timing relays designed for off-delay (SF) • Power on LED indicator (green) flickers
process control, machine tool control, • 11-pin plug-in with start, reset and gate during timing operation, UP (red) LED is on when
safety control and many other (interrupt) input signals and a DPDT contact normally open contact is closed
types of applications. The timers output
MS4SC Series
are plug-in 8-pin or 11-pin surface/ • Timing range from 0.05 seconds to 60 hours • On-delay timer
DIN-rail mountable with up to four • Timer scale with selectable ranges of • 8-pin plug-in with a SPDT timed contact
selectable modes of operation and 0-6, 0-12, 0-30 and 0-60 output and a SPDT instantaneous contact output
four selectable timing ranges. • Timing units in selectable ranges of 0.1s, sec, • Timing range from 0.05 seconds to 60 hours
min and hrs
• Timer scale with selectable ranges of 0-6, 0-12,
• Power on LED indicator (green) flickers 0-30 and 0-60
during timing operation, UP (red) LED is on
• Timing units in selectable ranges of 0.1s, sec, min
when normally open contact is closed
and hrs
MS4SA Series • Power on LED indicator (green) flickers
• On-delay timer during timing operation, UP (red) LED is on when
• 8-pin plug-in with a DPDT contact output normally open contact is closed
• Timing range from 0.05 seconds to 60 hours
• Timer scale with selectable ranges of
0-6, 0-12, 0-30 and 0-60s
Fuji 1/16 DIN Super Timers Selection Chart
Part Number Price Description Time Range
Fuji Electric multi-mode relay timer, 0.05 seconds to 60 hours selectable timing range, 100-240 VAC operating voltage, 5A 0.05 seconds
MS4SM-AP-ADC* $65.00
contact rating, (1) DPDT timed relay output(s), socket mount, 11-pin. Requires Fuji Electric TP411X or TP411SBA timer socket. to 60 hours
Fuji Electric on-delay relay timer, 0.05 seconds to 60 hours selectable timing range, 100-240 VAC operating voltage, 5A contact 0.05 seconds
MS4SA-AP-ADC $65.00
rating, (1) DPDT timed relay output(s), socket mount, 8-pin. Requires Fuji Electric TP48X or TP48SB timer socket. to 60 hours
Fuji Electric on-delay relay timer, 0.05 seconds to 60 hours selectable timing range, 100-240 VAC operating voltage, 5A contact
0.05 seconds
MS4SC-AP-ADC* $65.00 rating, (1) SPDT timed relay and (1) SPDT instant relay output(s), socket mount, 8-pin. Requires Fuji Electric TP48X or TP48SB
to 60 hours
timer socket.
Fuji Electric multi-mode relay timer, 0.05 seconds to 60 hours selectable timing range, 24 VAC/VDC operating voltage, 5A 0.05 seconds
MS4SM-CE-ADC* $65.00
contact rating, (1) DPDT timed relay output(s), socket mount, 11-pin. Requires Fuji Electric TP411X or TP411SBA timer socket. to 60 hours
Fuji Electric on-delay relay timer, 0.05 seconds to 60 hours selectable timing range, 24 VAC/VDC operating voltage, 5A contact 0.05 seconds
MS4SA-CE-ADC* $65.00
rating, (1) DPDT timed relay output(s), socket mount, 8-pin. Requires Fuji Electric TP48X or TP48SB timer socket. to 60 hours
On-delay timer with selectable timing range from 0.05s to 60 hours. Input power is 24 VDC/AC. SPDT timed relay output and 0.05 seconds
MS4SC-CE-ADC* $60.00
SPDT instantaneous relay output. 8-pin connection. UL, CSA, TÜV approved. to 60 hours
TP411X $9.25 Fuji Electric timer socket, 35mm DIN rail mount. For use with MS4SM series timers.
TP411SBA $9.25 Fuji Electric timer socket, panel mount. For use with MS4SM series timers.
TP48X $9.25 Fuji Electric timer socket, 35mm DIN rail mount. For use with MS4SA and MS4SC series timers. N/A
TP48SB $9.25 Fuji Electric timer socket, panel mount. For use with MS4SA and MS4SC series timers.
PANEL-16 $15.50 AutomationDirect mounting clips, package of 5. For use with 1/16 DIN timers and counters.
* Socket mounts must be purchased separately
Dimensions
mm [inches]
(Timer and Socket Assembly) Control
www.automationdirect.com Relays and Timers tREL-73
For the latest prices, please check AutomationDirect.com.
1-800-633-0405
Fuji Miniature DIN Super Timers
Overview Features
• Highly accurate, with a repeat accuracy
The ST7P is a compact and highly accurate
within ±1% at maximum setting time
timer. It is an on-delay operation type with
a single timing range. These timers are • ST7P models offer a number of timing
ranges. Please see Selection Guide below
designed to optimize mounting space in
small areas. Mounting is by DIN rail or by • Large dial makes time setting easy
securing directly to a panel with a fastener. • LED indicators make it easy to monitor
timer operation
• ST7P series meets UL and CSA standards
Fuji Miniature DIN Super Timers Selection Chart
Part Number Price Description Voltage Time Range
Mini-DIN on-delay timer with timing range of 0.4s to 5s. Input power is 100-120 VAC. 0.4 seconds to
ST7P-2A15S-ADC $51.00
DPDT relay output. UL, CSA, TÜV approved 5 seconds
Mini-DIN on-delay timer with timing range of 2s to 30s. Input power is 100-120 VAC.
ST7P-2A13T-ADC $51.00 2 seconds to 30 seconds
DPDT relay output. UL, CSA, TÜV approved
Mini-DIN on-delay timer with timing range of 4s to 60s. Input power is 100-120 VAC.
ST7P-2A16T-ADC $51.00 100-120VAC 4 seconds to 60 seconds
DPDT relay output. UL, CSA, TÜV approved
Mini-DIN on-delay timer with timing range of 1 min. to 10 min. Input power is 100-120 VAC.
ST7P-2A11N-ADC $51.00 1 minute to 10 minutes
DPDT relay output. UL, CSA, TÜV approved
Mini-DIN on-delay timer with timing range of 4 min. to 60 min. Input power is 100-120 VAC.
ST7P-2A16N-ADC $51.00 4 minutes to 60 minutes
DPDT relay output. UL, CSA, TÜV approved
Mini-DIN on-delay timer with timing range of 0.4s to 5s. Input power is 24 VDC. 0.4 seconds to
ST7P-2DE5S-ADC $51.00
DPDT relay output. UL, CSA, TÜV approved 5 seconds
Mini-DIN on-delay timer with timing range of 2s to 30s. Input power is 24 VDC.
ST7P-2DE3T-ADC $51.00 2 seconds to 30 seconds
DPDT relay output. UL, CSA, TÜV approved
Mini-DIN on-delay timer with timing range of 4s to 60s. Input power is 24 VDC.
ST7P-2DE6T-ADC $51.00 24VDC 4 seconds to 60 seconds
DPDT relay output. UL, CSA, TÜV approved
Mini-DIN on-delay timer with timing range of 1 min. to 10 min. Input power is 24 VDC.
ST7P-2DE1N-ADC $49.00 1 minute to 10 minutes
DPDT relay output. UL, CSA, TÜV approved
Mini-DIN on-delay timer with timing range of 4 min. to 60 min. Input power is 24 VDC.
ST7P-2DE6N-ADC $49.00 4 minutes to 60 minutes
DPDT relay output. UL, CSA, TÜV approved
TP88X2 $9.25 DIN rail/surface mount socket for ST7P series timers. UL, CSA, TÜV approved N/A N/A
Dimensions
mm [inches]
Timer and Socket Assembly Control
www.automationdirect.com Relays and Timers tREL-77
