DIGITAL ULTRASONIC AXLE TESTER

(RDSO APPROVED)

Digital Ultrasonic Flaw Detector

DIGISCAN DS-333
with colour TFT display

FEATURES
● Operation with Li-Ion Battery ● Built in trigonometric function for precise
aw detection
● TFT type LCD with LED back light, pixel
density of 320 X 240 ● Internal triggering
● 3 Kg weight with batteries ● Gated zoom facility to view expanded
portion of the defect
● Receiver Bandwidth range from 1MHz to
6MHZ ● Selectable logic for both gates
● Measuring range from 5mm to 5mtrs in ● Background reference echo pattern for
steel easy comparison of the defect
● Selectable transducer modes: single, ● 10000 ‘A’ scan memories
dual and angle beam
● 100 calibration sets
● Dual gate for accurate thickness
● USB interface for data logging
measurement
 KEYPAD OPERATION

Continuous
display of
main parameters

Large A-scan
display area

Sharp Echo

User friendly
operation
Color coded
function keys

The latest DIGISCAN DS-333 is built tough and easy to use. Full size access to all the

functions. The large, high resolution display has a wide viewing angle and good key board

ensures direct visibility in any light conditions.

The TFT colored display has the ability to display small echoes which are very relevant to

demanding UT operators, it does not miss any information. The DAC is offered in

accordance to demanding customers needs.

DIGISCAN DS-333 is a complete instrument suitable for most applications where

Ultrasonic Testing is carried out. It's simplicity to use, versatile features and ability to

display high fidelity Ultrasonic signals, makes it an ideal choice for Axle Testing.
USER SPECIFICATIONS.

1. LCD DISPLAY
TFT color LCD with LED back light, 300 X 200 pixel, 120mm (W) X 90mm (H) Pixel
1.1 Display
density 320 X R.G.B (H) X 240 (V).

1.2 Display Freeze Current display freezed.

1.3 Active Freeze Display accumulation, active freeze echo to be saved.

1.4 Reference Echo Pattern Reference pattern can be displayed at the background from selected location

1.5 Display Pattern Unlled or Filled.

2. PULSER / RECEIVER
2.1 Receiver Bandwidth 1MHZ to 6MHZ by broad band amplier
2.2 Gain Total gain 120dB, 0–80dB operatable, 0.1,0.5,1,2,6,12dB selectable
2.3 Rejection Linear (0 – 99%)
2.4 Operating Mode Single probe T+R, double probe T/R.
2.5 Test Mode Pulse reection or pulse Transmission
2.6 Energy NOR/LOW selectable.
2.7 Probe Zero 99.99us in step of 0.1mm
2.8 Vertical Linearity Within ±3% on all ranges
2.9 Probe Connector BNC type
2.10 Echo Display Full wave rectied.

3. TIME BASE
3.1 Range 5mm min. –5000mm. Max (@5890M/sec)
0-3000mm continuous variable in step of 0.1mm , 0.01mm/step for 10- 100mm,
3.2 Delay
0.1mm/step for 100mm – 1Mtrs, 1mm/step for 1Mtr – 5Mtr
Auto limiting for set parameters, Variable in 10Hz steps from 10Hz to
3.3 PRF
100Hz,Variable in 100Hz steps from 100Hz to 1000Hz .
3.4 Velocity 2000M/sec – 9999M/sec Transverse mode velocity
3.5 Time Base Linearity Within ±1.25% on all ranges
3.6 Zoom Gated portion min. 10mm, (expansion of gated signal within full screen length)
3.7 Triggering Internal

4. MONITOR GATE

2 Gates
- Width 1/10 screen to full screen
4.1 Monitor Gates - Height 1/10 screen to 99%
- Gate start measured from '0' div
- ± logic selectable

Common Audio (Audio mute), sound shall be loud, audible to hear in open
4.2 Monitor Logic Alarm RED LED for gate1 function GREEN LED for gate2 function. Total of 2
LEDs provided.

5. DAC

5.1 DAC 10 points with LED glow & alarm facility

6. GENERAL
Beam path, aw depth & projection distance displayed for selected echo
within Gate 1
6.1 Trigonometric functions
: Angle selection 0-90°
: Job thickness selection 0.1 to 999mm
Echo height – ±1.0% tolerance Thickness (initial pulse to Echo) – ±0.1mm or
6.2 Measurements
±set range/300 which ever more with peak & ank option

6.3 Measurement units Millimeter

Minimum 10000Sets data set-ups along with ‘A’ scans with calibration Parameters,
trigonometric values and Label .
6.4 Memory
-100calibration parameter sets .
- Recalling the cal- sets, Frame set and labels as and when required

- PC connectivity via USB-A, with Export function opening in MSWords,/PDF

6.5 Interface/outputs - Pen Drive Connectivity via USB-B.
- Direct Printer Connectivity-Dot matrix Printer-DB9 Connector

EECOWIN PC interface software with Suitable port & transfer software. Can upload
6.6 PC software
“FRAME” from saved set to PC through the USB port and through Pen drive.

6.7 Transfer to web portal Save data compatible with web portal

6.8 Logging of operator 12 nos operator

Instrument key board will be user friendly with direct access to frequently
Used functions.
6.9 Key Board
Detachable Alpha Numeric QWERTY key board with back space and space bar for
Alpha Numeric Labelling.
6.10 Trace Color Black and white background. Trace color Green, Blue, Black, Red.

5div(H) X 5div(V), further sub divided , Into 10 small divisions. Two types of
6.11 Graticule
selectable graticules viz-Standard and CRT graticules.

6.12 Dimension 260mm x 200mm x 75mm (W X H X D) Max.

6.13 Weight 3 Kg.

Li-ion battery 3.7V max, 20800mAH
Rechargeable battery model BAT324l
- Operating time 8 Hrs (min) with battery
6.14 Power Source - Battery charger cum mains adaptor 100-240V, 50Hz/60Hz, Model
- AD5V5 Full charge in 8 hrs
- External charger model CGR322 with automatic cutoff facility to protect battery
from over charging.
Battery status indicator on LCD, with auto shut down and color change for Low
Battery Indicator
6.15 Battery. Automatic cut-off circuit to be provided built-in to protect against over
loading of equipment.

6.16 Operating Temperature Equipment work up to ambient temperature of 55OC

Horizontal & vertical graticule, Lock, Battery status, Back ground. Gain,
Beam path, surface distance, aw depth/thickness , zoom, Probe zero, Delay,
6.17 Parameter display
Range, Reject, Gate1/Gate2 ON/OFF, Gate shift, Gate Width, Gate height,
alarm mute, save, recall.
1) N2.5BR2 Probe
6.18 Accessories 2) PKBB-2 Cable
3) 16GB Pen drive
6.19 Lock Keyboard can be locked.

EEC House, C-7, Dalia Industrial Estate, Off New Link Road, Andheri (W), Mumbai 400 053. India
Tel No.: +91-22-6150 3800 ♦ Email: ndtsales@eecindia.com ♦ Web: www.eecindia.com
Regional Offices: CHENNAI, BENGALURU, KOLKATA, HYDERABAD, PUNE, PATNA, NAGPUR, NEW DELHI, VADODARA