Cluster-2 RDSS/0001/2022/Hardoi & lakhimpur

Sl.No. Item Description Units Proposed

Erection Unit
Rate

1 LT Line with XLPE Armoured Cable in high loss area

2 8.5 m/180 kgs PCC Poles (PCC Pole as per state practice) Nos. 975
3 9 M long steel Tubular poles with welded steel base plate of Nos. 1000
Designation 410 SP 31
4 11 M long steel Tubular poles with welded steel base plate of Nos. 1100
Designation 410 SP 55
5 Foundation of STP Supports as per scope of works, cement Nos. 2056
concreting (1:3:6) (0.5 cmt for each support & .014 cmt. For muffing)

6 Red oxide paint as per TS Ltr 200

7 Aluminium paint as per TS Ltr 210
8 Foundation of PCC Supports as per scope of works, cement Nos. 1072
concreting (1:3:6) (0.268 Cmt for each support)
9 Stone pad for supports as per scope of works & drawing Nos. 10
(300x300x75 mm )
10 1.1 kV Single Core 25sqmm XLPE armoured cable (1Cx25 sqmm) Km. 2095

11 1.1 kV Single Core 50sqmm XLPE armoured cable (1Cx50 sqmm) Km. 2557

12 1.1 kV Single Core 95sqmm XLPE armoured cable (1Cx95 sqmm) Km. 3068

13 1.1 kV Single Core 120sqmm XLPE armoured cable (1Cx120 sqmm) Km. 3810

14 LT cross arm arrangement angel (50x50x6mm) (50x8mm) (weight- set 41

9.41 kg) with Nuts and bolts
15 LT cross arm arrangement angel (75x75x8mm) (65x8mm) (weight- set 75
18.6 kg) with Nuts and bolts
16 C-Clamp with Nut & bolts Nos. 5
17 LT shakle insulator Nos. 4
18 Distribution tie for shakle insulator Nos. 15
19 Mid span joint 25sqmm Nos. 10
20 Mid span joint 50sqmm Nos. 10
21 Mid span joint 95sqmm Nos. 15
22 Mid span joint 120sqmm Nos. 15
23 Three phase 20SWG CRCA MS sheet by deep drawn/sheet bending Nos. 143
process Pole top distribution box with calmps (50x6 mm) and nut &
bolts and lugs suitable for 25 sqmm armoured cable

24 Three Single phase 20SWG CRCA MS sheet by deep drawn/sheet Nos. 143
bending process Pole top distribution box with calmps (50x6 mm)
and nut & bolts and lugs suitable for 50 sqmm armoured cable
Sl.No. Item Description Units Proposed
Erection Unit
25 Three phase 20SWG CRCA MS sheet by deep drawn/sheet bending Nos. 143
process Pole top distribution box with calmps (50x6 mm) and nut &
bolts and lugs suitable for 95 sqmm armoured cable

26 Three phase 20SWG CRCA MS sheet by deep drawn/sheet bending Nos. 143
process Pole top distribution box with calmps (50x6 mm) and nut &
bolts and lugs suitable for 120 sqmm armoured cable

27 Earthing of pole by earthing coil (with Salt & Charcoal) Nos. 50

28 8 SWG GI wire for pole,DB earthing with GI nuts, bolts & washers Kg. 6

29 Removal of existing material and shifting to MVVNL store Km. 3689

30 Armoured cabling in consumer service connection 0
31 Single phase (2CX4 sqmm) PVC Armoured Service Cable Km. 4149
32 Single phase (2CX6 sqmm) PVC Armoured Service Cable Km. 4979
33 Three phase (4CX16 sqmm) PVC Armoured Service Cable Km. 6224
34 Replacement of Bare conductors/Damage cable with AB cables 0

35 8.5 m/180 kgs PCC Poles (PCC Pole as per state practice) Nos. 975
36 9 M long steel Tubular poles with welded steel base plate of Nos. 1000
Designation 410 SP 31
37 11 M long steel Tubular poles with welded steel base plate of Nos. 1100
Designation 410 SP 55
38 Foundation of STP Supports as per scope of works, cement Nos. 2056
concreting (1:3:6) (0.5 cmt for each support & .014 cmt. For muffing)

39 Red oxide paint as per TS Ltr 200

40 Aluminium paint as per TS Ltr 210
41 Foundation of PCC Supports as per scope of works, cement Nos. 1072
concreting (1:3:6) (0.268 Cmt for each support)
42 Stone pad for supports as per scope of works & drawing Nos. 10
(300x300x75 mm )
43 Single phase Glass Fiber Reinforced Polyester Sheet Moulding Nos. 143
Compound (SMC) Pole top distribution box with calmps (40x3 mm)
and nut & bolts
44 Three phase Glass Fiber Reinforced Polyester Sheet Moulding Nos. 143
Compound (SMC) Pole top distribution box with calmps (40x3 mm)
and nut & bolts
45 2Cx25 sqmm XLPE aluminium conductor cable for single phase DB Mtr. 26
incomer
46 4Cx35 sqmm XLPE aluminium conductor cable for Three phase DB Mtr. 35
incomer
47 Earthing of pole by earthing coil (with Salt & Charcoal) Nos. 50
48 8 SWG GI wire for pole,DB earthing with GI nuts, bolts & washers Kg. 6
Sl.No. Item Description Units Proposed
Erection Unit
49 Aerial Bunched XLPE Cable 3X50 (Ph) + 1X35 ( Bare messenger cum Km. 5626
neutral) + 1x16 (insulated Street lighting) sqmm

50 Aerial Bunched XLPE Cable 3X95 (Ph) + 1X70 ( Bare messenger cum Km. 8778
neutral) + 1x16 (insulated Street lighting) sqmm

51 Aerial Bunched XLPE Cable 3X120 (Ph) + 1X95 ( Bare messenger cum Km. 10334
neutral) + 1x16 (insulated Street lighting) sqmm

52 LT pole clamp (50x8mm) (2.56 kg) with Nut and bolts set 10
53 LT Eye hook Nos. 8
54 suspension clamp Nos. 20
55 Dead end clamp Nos. 20
56 Insulation Piercing connectors/Connector type-I (AB cable to AB Nos. 10
cable)
57 Insulation Piercing connectors type-II (AB cable to Service cable) Nos. 10

58 PG clamp for messanger wire Nos. 20

59 Removal of existing material and shifting to MVVNL store Km. 3689
60 Provision of AB cables for extra circuits at existing DTR 0
61 Overhead LT for Extra circuit at existing DTR 0
62 8.5 m/180 kgs PCC Poles (PCC Pole as per state practice) Nos. 875
63 Foundation of PCC Supports as per scope of works, cement Nos. 1072
concreting (1:3:6) (0.268 Cmt for each support)
64 11 M long steel Tubular poles with welded steel base plate of Nos. 1000
Designation 410 SP 55
65 Foundation of STP Supports as per scope of works, cement Nos. 2056
concreting (1:3:6) (0.5 cmt for each support & .014 cmt. For muffing)

66 Stone pad for supports as per scope of works & drawing Nos. 10
(300x300x75 mm )
67 Red oxide paint as per TS Ltr 200
68 Aluminium paint as per TS Ltr 210
69 Single phase Glass Fiber Reinforced Polyester Sheet Moulding Nos. 143
Compound (SMC) Pole top distribution box with calmps (40x3 mm)
and nut & bolts
70 Three phase Glass Fiber Reinforced Polyester Sheet Moulding Nos. 143
Compound (SMC) Pole top distribution box with calmps (40x3 mm)
and nut & bolts
71 2Cx25 sqmm XLPE aluminium conductor cable for single phase DB Mtr. 26
incomer
72 4Cx35 sqmm XLPE aluminium conductor cable for Three phase DB Mtr. 35
incomer
73 Earthing of pole by earthing coil (with Salt & Charcoal) Nos. 50
74 8 SWG GI wire for pole,DB earthing with GI nuts, bolts & washers Kg. 6
Sl.No. Item Description Units Proposed
Erection Unit
75 Aerial Bunched XLPE Cable 3X50 (Ph) + 1X35 ( Bare messenger cum Km. 5626
neutral) + 1x16 (insulated Street lighting) sqmm

76 Aerial Bunched XLPE Cable 3X95 (Ph) + 1X70 ( Bare messenger cum Km. 8778
neutral) + 1x16 (insulated Street lighting) sqmm

77 Aerial Bunched XLPE Cable 3X120 (Ph) + 1X95 ( Bare messenger cum Km. 10334
neutral) + 1x16 (insulated Street lighting) sqmm

78 LT pole clamp (50x8mm) (2.56 kg) with Nut and bolts set 10
79 LT Eye hook Nos. 8
80 suspension clamp Nos. 20
81 Dead end clamp Nos. 20
82 Insulation Piercing connectors/Connector type-I (AB cable to AB Nos. 10
cable)
83 Insulation Piercing connectors type-II (AB cable to Service cable) Nos. 10

84 PG clamp for messanger wire Nos. 20

85 Feeder Segregation 0
86 Overhead 11 kV New feeder 0
87 8.5 m/180 kgs PCC Poles (PCC Pole as per state practice) Nos. 875
88 Foundation of PCC Supports as per scope of works, cement Nos. 1072
concreting (1:3:6) (0.268 Cmt for each support)
89 Stone pad for supports as per scope of works & drawing Nos. 10
(300x300x75 mm )
90 11KV V-Type Cross-arm (M.S Channel 75X40x6mm) welded with MS Nos. 74
angel (50x50x6) (weight-10.37 kg) with bolts and nuts

91 Cross arm holding clamps (MS Flat-50x8 mm) (weight-1.33 kg) with Nos. 9
bolts and nuts
92 F- Bracket MS flat (50x8 mm) (weight- 1.56 kg) with nut and bolts Nos. 12

93 Cut point top channel (100x50x6 mm) of length 230 mm along with set 16
nut & bolts
94 Cut point bottom channel (100x50x6 mm) of length 1150 mm along set 54
with nut & bolts
95 Tapping horizontal cross arm (100x50x6 mm) of length 1020 mm set 49
along with calmps (50x8) and nut and bolts
96 Tapping top channel (100x50x6 mm) of length 256 mm along with set 19
calmps(50x8) and nut and bolts
97 DP Top channel (Channel-100X50x6mm) 2240 mm long with bolts Nos. 97
and nuts
98 Horizontal Belting Angle (Angle-50x50x6 mm) 2240 mm long with Nos. 35
bolts and nuts
99 Cross bracing Angle (Angle-50x50x6 mm) 2500 mm long with bolts Nos. 43
and nuts
Sl.No. Item Description Units Proposed
Erection Unit
100 Belting clamp-Top clamp (Flat-50x8 mm) (weight 1.4 kg) with bolts Nos. 13
and nuts
101 Belting clamp-Bottom clamp (Flat-50x8 mm) (weight 1.5 kg) with Nos. 14
bolts and nuts
102 Fish plate for jumpering Nos. 4
103 6/2.59 + 1/2.59 mm (30 sqmm Al. Area) ACSR weasel conductors Km. 1935

104 6/3.35 + 1/3.35 mm (50 sqmm Al. Area) ACSR Rabbit conductors Km. 2337

105 PG clamp for weasel conductor Nos. 10

106 PG clamp for Rabbit conductor Nos. 10
107 Distribution tie for pin insulator Nos. 20
108 Jointing sleeves Aluminium Nos. 25
109 Aluminium binding wire and tape Kg. 6
110 11 KV polymer Disc insulator 45 KN (B&S type) along with suitable Nos. 60
hardware fittings
111 11 KV Polymer Pin Insulators 5 KN with nuts Nos. 20
112 Earthing of pole by earthing coil (with Salt & Charcoal) Nos. 50
113 8 SWG GI wire for pole,DB earthing with GI nuts, bolts & washers Kg. 6

114 MS Danger board with Back calmps & nuts and bolts as per Nos. 10
Technical specification
115 Anti-climbing device-3.5 kgs, 2.5mm dia (12 SWG) galvanized barbed Kg. 10
wire on each 11 kV support as per scope of works & TS
116 Numbering and scheme details on each pole as per Technical Nos. 10
specification and scope of work
117 Underground 11 kV New feeder 0
118 11 M long steel Tubular poles with welded steel base plate of Nos. 1000
Designation 410 SP 55
119 Foundation of STP Supports as per scope of works, cement Nos. 2056
concreting (1:3:6) (0.5 cmt for each support & .014 cmt. For muffing)

120 Red oxide paint as per TS Ltr 200

121 Aluminium paint as per TS Ltr 210
122 DP Top channel (Channel-100X50x6mm) 2240 mm long with bolts Nos. 97
and nuts
123 Horizontal Belting Angle (Angle-50x50x6 mm) 2240 mm long with Nos. 35
bolts and nuts
124 Cross bracing Angle (Angle-50x50x6 mm) 2500 mm long with bolts Nos. 43
and nuts
125 Belting clamp-Top clamp (Flat-50x8 mm) (weight 1.4 kg) with bolts Nos. 13
and nuts
126 Belting clamp-Bottom clamp (Flat-50x8 mm) (weight 1.5 kg) with Nos. 14
bolts and nuts
127 Fish plate for jumpering Nos. 4
128 11 KV Polymer Pin Insulators 5 KN with nuts Nos. 20
Sl.No. Item Description Units Proposed
Erection Unit
129 Heat Shrinkable Jointing kit indoor for 11 KV 3C×185 sq.mm. XLPE Nos. 1000
Cable
130 Heat Shrinkable Jointing kit outdoor for 11 KV 3C×185 sq.mm. XLPE Nos. 1000
Cable
131 Heat Shrinkable Cable Jointing kit straight through for 11 kv 3C×185 Nos. 2500
sq.mm. XLPE Cable
132 Supply and Placing of Pre-cast Concrete Manhole Chambers of size Nos. 5903
900mm x 900mm Internal Dimension x 800mm Height & 100mm
wall thickness (Heavy Duty) with Concrete Cover of 100mm
thickness in the specified locations in the trench.
133 Supply & Erection of 11 kV Single core 95 sqmm XLPE Aluminium Mtr. 26
cable for jumpering
134 Supply & Erection of Aluminum lugs -185 Sq.mm. Nos. 20
135 Supply & Erection of Cable warning tape Kg. 10
136 Fixing of Cable marker on cable route and inscription of feeder name Nos. 350
and voltage on cable marker
137 Supply of 11 KV 3C×185 sqmm XLPE Cable Km. 0
138 Earth digging, laying, termination/jointing, Erection, Testing & 0
commissioning of 11 KV grade 3-core 185 Sqmm XLPE power cable
underground and backfilling with bricks, sands, excavated soil as per
standard practise, levelling etc complete in all respect along with all
accessories, earthing etc. and as per TS/approved drawing.

139 Laying of 11 KV 3x185 sq mm XLPE twin cable by digging of trench Rmt. 392
1100 mm deep, 750 mm wide its boxing with brick,sand,stone slab
after laying of cable separation of cable by brick wall up to stone
slab filling and proper levelling & ramming. The ferruling of cable
also include in this work (all the material)

140 Earth digging by horizontal Directional Drilling(HDD) method, 0

Laying, termination/jointing, Erection, Testing & commissioning of
11 KV grade 3-core 185 Sqmm XLPE power cable underground using
HDPE pipe complete in all respect along with all accessories,
earthing etc. and as per TS/approved drawing .

141 Laying of 11 KV 3C×185 sqmm XLPE twin Cable Rmt. 40

142 Pipe (HDPE 160 mm dia) for Cable Laying Rmt. 350
143 Earth digging by horizontal Directional Drilling(HDD) method,Laying, 0
termination/jointing, Erection, Testing & commissioning of 11 KV
grade 3-core 185 Sqmm XLPE power cable underground without
HDPE Pipes in all respect along with all accessories, earthing etc. and
as per TS/approved drawing .

144 Laying of 11 KV 3C×185 sqmm XLPE twin Cable Rmt. 550

Sl.No. Item Description Units Proposed
Erection Unit
145 Hoisting of 3Cx185sqmm 11 KV single cable on double pole including Nos. 3982
GI pipe 3 mtr long 6'' dia including jumpering,dressing of cable with
required all necessary clamps and nut, bolts.(all the material shall be
arranged by contractor)

146 Testing & commissioning of 11 KV grade 3-core 185 Sqmm XLPE Km. 0
power underground cable
147 Earthing of pole by earthing coil (with Salt & Charcoal) Nos. 50
148 8 SWG GI wire for pole, DB earthing with GI nuts, bolts & washers Kg. 6

149 MS Danger board with Back calmps & nuts and bolts as per Nos. 10
Technical specification
150 Anti-climbing device-3.5 kgs, 2.5mm dia (12 SWG) galvanized barbed Kg. 10
wire on each 11 kV support as per scope of works & TS
151 Numbering and scheme details on each pole as per Technical Nos. 10
specification and scope of work
152 Railway Crossing 0
153 11 M long steel Tubular poles with welded steel base plate of Nos. 1000
Designation 410 SP 55
154 Foundation of STP Supports as per scope of works, cement Nos. 2056
concreting (1:3:6) (0.5 cmt for each support & .014 cmt. For muffing)

155 Red oxide paint as per TS Ltr 200

156 Aluminium paint as per TS Ltr 210
157 DP Top channel (Channel-100X50x6mm) 2240 mm long with bolts Nos. 97
and nuts
158 Horizontal Belting Angle (Angle-50x50x6 mm) 2240 mm long with Nos. 35
bolts and nuts
159 Cross bracing Angle (Angle-50x50x6 mm) 2500 mm long with bolts Nos. 43
and nuts
160 Belting clamp-Top clamp (Flat-50x8 mm) (weight 1.4 kg) with bolts Nos. 13
and nuts
161 Belting clamp-Bottom clamp (Flat-50x8 mm) (weight 1.5 kg) with Nos. 14
bolts and nuts
162 Fish plate for jumpering Nos. 4
163 11 KV Polymer Pin Insulators 5 KN with nuts Nos. 20
164 9 kV, 10 kA station class LA Nos. 108
165 Supply of 11 KV 3C×185 sqmm XLPE Cable Mtr. 0
166 Supply of 33 KV 3C×300 sqmm XLPE Cable Mtr. 0
167 Heat Shrinkable Jointing kit outdoor for 11 KV 3C×185 sq.mm. XLPE Nos. 1000
Cable
168 Heat Shrinkable Jointing kit outdoor for 33 KV 3C×300 sq.mm. XLPE Nos. 2000
Cable
Sl.No. Item Description Units Proposed
Erection Unit
169 Hoisting of 3Cx185 / 3Cx300 sqmm of 11 KV / 33 kV single cable on Nos. 3982
erected double pole including GI pipe 3 mtr long 6'' dia including
jumpering,dressing of cable with required all necessary clamps and
nut, bolts.(all the material shall be arranged by contractor)

170 11 KV or 33 kV LINE FOR UNDER GROUND RAILWAY CROSSING BY 2 0

Nos (INCLUDING ONE SPARE) 3Cx185 or 3Cx300 Sqmm XLPE
Armoured Cable USING 150MM DIA GI PIPES (grade A for
underground laying and grade B for pole support), OUTDOOR HEAT
SHRINKABLE CABLE JOINTING KITS, LUGS, 4 Nos GI 3-Meters LONG
pipe, EARTHING, 8 SWG GI WIRES, CABLE MARKERS, BI METALLICK
CLAMPS, JUMPERING , AS REQUIRED AS PER TECHNICAL
SPECIFICATIONS, DRAWINGS AND SCOPE OF THE WORK.

171 Earth digging by horizontal Directional Drilling(HDD) method, Mtr. 450

Laying, termination/jointing, Erection of 11 KV grade 3-core 185
Sqmm XLPE power cable underground as per TS/approved drawing .

172 Earth digging by horizontal Directional Drilling(HDD) method, Mtr. 475

Laying, termination/jointing, Erection of 33 KV grade 3-core 300
Sqmm XLPE power cable underground as per TS/approved drawing .

173 Digging of Trench by excavation of earth, laying of bricks to cover Mtr. 392
the cable and filling of sand & earth ramming and dressing properly
with complete job for laying 11 KV XLPE cables including cost of
Bricks, sand, clamps etc.
174 Digging of Trench by excavation of earth, laying of bricks to cover Mtr. 473
the cable and filling of sand & earth ramming and dressing properly
with complete job for laying 33 KV XLPE cables including cost of
Bricks, sand, clamps etc.
175 G.I. Pipe (6" dia.) for laying UG below the Railway track (minimum 3 Rmt. 100
meter) by HDD Method.
176 Supply & Erection of 11 kV Single core 95 sqmm XLPE Aluminium Mtr. 26
cable for jumpering
177 Supply & Erection of 33 kV Single core 120 sqmm XLPE Aluminium Mtr. 35
cable for jumpering
178 Supply & Erection of Aluminum lugs -185 Sq.mm. Nos. 20
179 Supply & Erection of Aluminum lugs -300 Sq.mm. Nos. 30
180 Testing & commissioning of 11 KV grade 3-core 185 Sqmm XLPE Mtr. 0
power underground cable
181 Testing & commissioning of 33 kV 3-core 300 Sqmm XLPE power Mtr. 0
underground cable
182 Earthing of pole by earthing coil (with Salt & Charcoal) Nos. 50
183 8 SWG GI wire for pole,DB earthing with GI nuts, bolts & washers Kg. 6
Sl.No. Item Description Units Proposed
Erection Unit
184 MS Danger board with Back calmps & nuts and bolts as per Nos. 10
Technical specification
185 Anti-climbing device-3.5 kgs, 2.5mm dia (12 SWG) galvanized barbed Kg. 10
wire on each 11 kV support as per scope of works & TS
186 Numbering and scheme details on each pole as per Technical Nos. 10
specification and scope of work
187 National highway crossing 0
188 11 M long steel Tubular poles with welded steel base plate of Nos. 1000
Designation 410 SP 55
189 Foundation of STP Supports as per scope of works, cement Nos. 2056
concreting (1:3:6) (0.5 cmt for each support & .014 cmt. For muffing)

190 Red oxide paint as per TS Ltr 200

191 Aluminium paint as per TS Ltr 210
192 DP Top channel (Channel-100X50x6mm) 2240 mm long with bolts Nos. 97
and nuts
193 Horizontal Belting Angle (Angle-50x50x6 mm) 2240 mm long with Nos. 35
bolts and nuts
194 Cross bracing Angle (Angle-50x50x6 mm) 2500 mm long with bolts Nos. 43
and nuts
195 Belting clamp-Top clamp (Flat-50x8 mm) (weight 1.4 kg) with bolts Nos. 13
and nuts
196 Belting clamp-Bottom clamp (Flat-50x8 mm) (weight 1.5 kg) with Nos. 14
bolts and nuts
197 Fish plate for jumpering Nos. 4
198 11 KV Polymer Pin Insulators 5 KN with nuts Nos. 20
199 9 kV, 10 kA station class LA Nos. 108
200 Supply & Erection of 11 kV Single core 95 sqmm XLPE Aluminium Mtr. 26
cable for jumpering
201 Supply & Erection of 33 kV Single core 120 sqmm XLPE Aluminium Mtr. 35
cable for jumpering
202 Supply & Erection of Aluminum lugs -185 Sq.mm. Nos. 20
203 Supply & Erection of Aluminum lugs -300 Sq.mm. Nos. 30
204 Supply of 11 KV 3C×185 sqmm XLPE Cable Mtr. 0
205 Supply of 33 KV 3C×300 sqmm XLPE Cable Mtr. 0
206 Earth digging by horizontal Directional Drilling(HDD) method, 0
Laying, termination/jointing, Erection, Testing & commissioning of
11 KV grade 3-core 185 or 300 Sqmm XLPE power cable
underground as per TS/approved drawing .
207 Earth digging by horizontal Directional Drilling(HDD) method, Mtr. 450
Laying, termination/jointing, Erection of 11 KV grade 3-core 185
Sqmm XLPE power cable underground as per TS/approved drawing .
Sl.No. Item Description Units Proposed
Erection Unit
208 Earth digging by horizontal Directional Drilling(HDD) method, Mtr. 475
Laying, termination/jointing, Erection of 33 KV grade 3-core 300
Sqmm XLPE power cable underground as per TS/approved drawing .

209 Pipe (HDPE 160 mm dia) for Cable Laying at road crossings Rmt. 90
210 Heat Shrinkable Jointing kit outdoor for 11 KV 3C×185 sq.mm. XLPE Nos. 1000
Cable
211 Heat Shrinkable Jointing kit outdoor for 33 KV 3C×300 sq.mm. XLPE Nos. 2000
Cable
212 Hoisting of 3Cx185 / 3Cx300 sqmm of 11 KV / 33 kV single cable on Nos. 3982
erected double pole including GI pipe 3 mtr long 6'' dia including
jumpering,dressing of cable with required all necessary clamps and
nut, bolts.(all the material shall be arranged by contractor)

213 Digging of Trench by excavation of earth, laying of bricks to cover Mtr. 392
the cable and filling of sand & earth ramming and dressing properly
with complete job for laying 11 KV XLPE cables including cost of
Bricks, sand, clamps etc.
214 Digging of Trench by excavation of earth, laying of bricks to cover Mtr. 473
the cable and filling of sand & earth ramming and dressing properly
with complete job for laying 33 KV XLPE cables including cost of
Bricks, sand, clamps etc.
215 Testing & commissioning of 11 KV grade 3-core 185 Sqmm XLPE Mtr. 0
power underground cable
216 Testing & commissioning of 33 KV 3-core 300 Sqmm XLPE power Mtr. 0
underground cable
217 Earthing of pole by earthing coil (with Salt & Charcoal) Nos. 50
218 8 SWG GI wire for pole,DB earthing with GI nuts, bolts & washers Kg. 6

219 MS Danger board with Back calmps & nuts and bolts as per Nos. 10
Technical specification
220 Anti-climbing device-3.5 kgs, 2.5mm dia (12 SWG) galvanized barbed Kg. 10
wire on each 11 kV support as per scope of works & TS
221 Numbering and scheme details on each pole as per Technical Nos. 10
specification and scope of work
222 Supply & Installation of 11KV VCB Switchgear panel outgoing for Nos. 10967
extra feeder under feeder segregation/bifurcartion works.
223 control room extension 0
224 Excavation in foundation in ordinary soil (Loam day or sand) Cu.m 270
including lift upto 1.5 mtr. And lead upto 30 m and including filling
watering and ramming of excavated earth into the building and
sides of the foundation trenches or in to the plinth and directed by
the engineer-in-charge upto a distance of 30 m from the foundation
Sl.No. Item Description Units Proposed
Erection Unit
225 Concrete with 4 cm.gauge 1st class brick ballast (class 150) coarse Sq.m 507
sand (F.M.1.8 to 2.5) and cement in proportion of 10:5:1 in
foundation and under floors including supply of all materials labour
and T&P etc. required for propoer complrtion of work.

226 1st class brick work in 1:6 cement & coarse sand (F.M.1.8 to 2.5) Cu.m 4206
morter in foundation & plinth including supply of all materials,
labour and T&P etc. required for propoer complrtion of work.

227 1st class brick (class 150)work in 1:6 cement & coarse sand (FM 1.8 Cu.m 4476
to 2.50) morter but in supper structure but for wall of one & half
brick thick including supply of all materials , labour T&P etc required
for propoer completion of work.
228 st class brick (class 150) work in 1:6 cement & coarse sand (FM1.8 to Cu.m 4476
2.50) morter but in supper structure but for wall of one brick thick
including supply of all materials , labour T&P etc required for proper
completion of work.
229 Mild steel or iron in plain work such as reinforced concrete or Kg. 80
reinforced brick work (when not included in over all rate) wrought
to required shape as necessary I/C bending for proper completion of
the work & I/C supply of steel its wastege shall be measured stee!
shall not be supplied by the department.

230 Mild steel or iron work in heavy sizes such as trusses built up gates, Kg. 108
door frames, record racks roof work gates etc. wrought to required
form including holes riveting or welding where necessary and also
including supply of steel bolts nuts wastage etc.and their fixing
required for proper completion of the work (steel is not supplies by
the department)
231 R.C.C. work with cement approved coarse sand (P.M. 1.8 to 2.5)and Cu.m 8269
2 Cm gauge graded approved hard stone ballast in proportion 1:2:4
in lintels of doors & windows excluding supply of reinforcement and
its bending but including its fixing & binding the same with 24 BWG
G.I. binding wire and including necessary centring & shuttering etc.
and also including cost of all materials, labour and T&P etc. required
for proper completion of the work.

232 R.c.c. work with cement approved coarse sand (P.M. 1.8 to 2.5)and 2 Cu.m 8147
Cm gauge graded approved hard stone ballast in proportion 1:1:5:3
for slab excluding supply of reinforcement and its bending but
including its fixing & binding the same with 24 BWG G.I binding wire
and I/C necessary centering & shuttering etc. and also I/C cost of all
materials, labour and T&P etc. required for proper completion of
the work.
Sl.No. Item Description Units Proposed
Erection Unit
233 12 MM thick plaster with cement morter consisting of 1 aart: Sparts Sq.m 234
of approved coarse sand on fare surface "ncluding supply of all
materials, labour T&P etc. required for proper completion of work.

234 Supply & fixing fan hooks 16 mm dia 200 mm long complete. Each 188
235 P/F glass strip of 40 mm depth in joints of floor and skirting at the Rmt. 27
time of laying, floors flush with floor level ncluding labour. Tools and
plants etc. complete.
236 40 mm thick 1:2:4 floor without base concrete floor with cement, Sq.m 360
approved coarse sand &2 cm. graded approved stone ballast
(shingle for bareily) laid in panels finished with 3mm floating coat of
neat cement or cement and marble dust in ratio of 5:1 as specified
and giving them a uniform finish including supply of all labour and
T&P etc required for proper completion of work.

237 White washing three coats of new surface including cost of all Sq.m 108
materials, labour and T&P etc. required for proper completion of
the work exept cost of angle iron and flat.
238 One priming coat and two coats of dry distemper castle or Sq.m 101
equivalent make on new surface including cost of all materials,
labour and T&P etc. required for proper completion of the work.

239 Finishing walls with water proof cement paint of approved make Nos. 126
and quality over new work with three coats to give an even shade
including supply of all materials, labour and T&P etc.required for
proper completion of the work.
240 Writing point for light with 1.5 sq.mm. FRPVC insulated multistrand Each 424
single core copper conductor cable in surface conduit pipe,
complete with copper earth continuity wire, piano type switch &
ceiling rose/angle/button holder on 3mm thick phenolic aminated
backelite-sheet etc. Complete in all respects, as directed including
matching colour wash.
241 Wiring point for fan/fresh air fan (light duty exhaust fan) n PVC Nos. 486
conduit with 1.5 sq.mm. FR PVC insulted multistrand copper
condctor cable as earth wire drawn nside the conduit.
242 S/F Batten/Angle Holder of approved quality complete n all respect. Each 108

243 Painting or varnishing on new iron work in small areas or new wood Sq.m 230
work with one coat of ready mixed priming paint and two coats of
approved superior quality ready mixed paint (Luxol) or equivalent
brand or varnish I/C supply of all materials, labour T&P etc. required
for proper completion of work.Paint to be used should conform
I.S.103-1950
244 Dismantling brick work or stone work in time or cement mortar and Cu.m 860
including stacking of materials as directed by E/l within distance of
60mtr.
Sl.No. Item Description Units Proposed
Erection Unit
245 Dismantling Existing plaster including disposal of refuse as directed Sq.m 49
by E/l within a distance of 60 mtr.
246 Dismantling C.C brick or brick or granolithic floors including base Sq.m 72
concrete and including stacking of dismantled material as directed
by E/l within a distance of 60 mtr.
247 Road crossings on 9 meter and 11 meter Poles 0
248 9 meter long /400 KG PCC Poles (PCC Pole as per state practice) Nos. 1078

249 Foundation of PCC Supports as per scope of works, cement Nos. 1072
concreting (1:3:6) (0.268 Cmt for each support)
250 11 M long steel Tubular poles with welded steel base plate of Nos. 1000
Designation 410 SP 55
251 Foundation of STP Supports as per scope of works, cement Nos. 2056
concreting (1:3:6) (0.5 cmt for each support & .014 cmt. For muffing)

252 Stone pad for supports as per scope of works & drawing Nos. 10
(450x450x75 mm )
253 Red oxide paint as per TS Ltr 200
254 Aluminium paint as per TS Ltr 210
255 V-cross arm supporting channel (100x50x6 mm), 3000mm long with set 124
holding clamps, bolts and nuts.
256 11KV V-Type Cross-arm (M.S Channel 75X40x6mm) welded with MS Nos. 74
angel (50x50x6) (weight-10.37 kg) with bolts and nuts

257 11KV Bridling V-Type Cross-arm (M.S Channel 75X40x6mm) welded Nos. 74
with MS angel (50x50x6) (weight- 10.5 kg) with bolts and nuts

258 Guarding Cross arm (75x40x6 mm) 2210 mm long with eye bolts Nos. 83
(16mm dia)
259 Back clamp for guarding cross arm (50x8 mm) (weight- 1.15 kg) with Nos. 10
nut & bolts.
260 Cross arm holding clamps (MS Flat-50x8 mm) (weight-1.33 kg) with Nos. 9
bolts and nuts
261 F- Bracket MS flat (50x8 mm) (weight- 1.56 kg) with nut and bolts Nos. 12

262 Distribution tie for pin insulator Nos. 20

263 11 KV Polymer Pin Insulators 5 KN with nuts Nos. 20
264 6 SWG GI wire along the span Kg. 6
265 8 SWG GI wire across the span Kg. 6
266 12 SWG GI wire for binding Kg. 6
267 Earthing of pole by earthing coil (with Salt & Charcoal) Nos. 50
268 8 SWG GI wire for pole,DB earthing with GI nuts, bolts & washers Kg. 6

269 MS Danger board with Back calmps & nuts and bolts as per Nos. 10
Technical specification
Sl.No. Item Description Units Proposed
Erection Unit
270 Anti-climbing device-3.5 kgs, 2.5mm dia (12 SWG) galvanized barbed Kg. 10
wire on each support as per scope of works & TS
271 Numbering and scheme details on each pole as per Technical Nos. 10
specification and scope of work
272 Relocation of 11/.433 KV 3Ph Distribution Transformer 0
273 8.5 m/180 kgs PCC Poles (PCC Pole as per state practice) Nos. 875
274 Foundation of PCC Supports as per scope of works, cement Nos. 1072
concreting (1:3:6) (0.268 Cmt for each support)
275 Stone pad for supports as per scope of works & drawing Nos. 10
(300x300x75 mm )
276 Shifting of Distribution transformer and ALL fabricated items and job 10000
other allied materials
277 Distribution transformer for segregated feeders 0
278 9 meter long /400 KG PCC Poles (PCC Pole as per state practice) Nos. 1078

279 Foundation of PCC Supports as per scope of works, cement Nos. 1072
concreting (1:3:6) (0.268 Cmt for each support)
280 11 M long steel Tubular poles with welded steel base plate of Nos. 1000
Designation 410 SP 55
281 Foundation of STP Supports as per scope of works, cement Nos. 2056
concreting (1:3:6) (0.5 cmt for each support & .014 cmt. For muffing)

282 Stone pad for supports as per scope of works & drawing Nos. 10
(450x450x75 mm )
283 Red oxide paint as per TS Ltr 200
284 Aluminium paint as per TS Ltr 210
285 Transformer Top channel (100x50x6mm) 2800 mm long with nuts & Nos. 134
bolts
286 AB switch mounting channel (100x50x6mm) 2800 mm long with Nos. 74
nuts & bolts
287 Back clamp for AB switch mounting channel(50x8mm)- (weight-1.8 Nos. 19
kg) with nuts & bolts
288 DO fuse mounting channel (75x40x6mm) 2800 mm long with nuts & Nos. 106
bolts
289 Back clamp for DO fuse mounting channel(50x8mm)- (weight-1.9 kg) Nos. 17
with nuts & bolts
290 Transformer mounting channel (100x50x6mm) 2800 mm with nuts Nos. 139
& bolts
291 Transformer mounting channel support (50x50x6mm) 500 mm long Nos. 20
with Nuts & bolts.
292 Transformer Belting angle (50x50x6mm) 2800 mm long with nuts & Nos. 70
bolts
293 Transformer Belting angle support (35x35x6 mm) 500 mm long with Nos. 14
nuts & bolts
294 11 KV polymer Disc insulator 45 KN (B&S type) along with suitable Nos. 60
hardware fittings
Sl.No. Item Description Units Proposed
Erection Unit
295 11 KV Polymer Pin Insulators 5 KN with nuts Nos. 20
296 11/0.4 kV Distribution Transformer 25 KVA Three Phase aluminum Nos. 2374
wound DTR
297 11/0.4 kV Distribution Transformer 63 KVA Three Phase aluminum Nos. 2674
wound DTR
298 11/0.4 kV Distribution Transformer 100 KVA Three Phase aluminum Nos. 3074
wound DTR
299 11/0.4 kV Distribution Transformer 250 KVA Three Phase copper Nos. 4500
wound DTR
300 ACSR weasel counductor for Jumpering Mtr. 6
301 Bimetallic connector for HT & LT side of the transformer Nos. 18
302 T-Clamp & PG clamp for jumpering Nos. 35
303 LT Distribution box polyester sheet moulding compound (SMC) for Nos. 523
25 kVA Distribution transformer with arrangement of suitable bus-
bars & MCCB's as per scope of works of SBD
304 LT Distribution box polyester sheet moulding compound (SMC) for Nos. 573
63 kVA Distribution transformer with arrangement of suitable bus-
bars & MCCB's as per scope of works of SBD
305 LT Distribution box polyester sheet moulding compound (SMC) for Nos. 667
100 kVA Distribution transformer with arrangement of suitable bus-
bars & MCCB's as per scope of works of SBD
306 LT Distribution box polyester sheet moulding compound (SMC) for Nos. 750
250 kVA Distribution transformer with arrangement of suitable bus-
bars & MCCB's as per scope of works of SBD
307 Back clamp support for LTDB ( 65x8 mm) Nos. 25
308 Whole Current A.C. Three Phase Smart Energy Meter Nos. 550
309 1Cx35 sqmm 1.1KV XLPE cable with suitable lugs and glands and Mtr. 13
cable ties
310 1Cx70 sqmm 1.1KV XLPE cable with suitable lugs and glands and Mtr. 16
cable ties
311 1Cx150 sqmm 1.1KV XLPE cable with suitable lugs and glands and Mtr. 20
cable ties
312 Clamps for LT service cable support Nos. 25
313 9 kV, 5 kA distribution class LA Nos. 108
314 11 kV, 3-ph, 200 A, 3 Pin type Vertical Mounting type AB Switch set 822
along with Support Insulators, Base Channel, down Pipe, operating
handle and support, etc. complete as per technical specifications,
scope of works and approved drawings

315 11 kV, 3-ph, Drop Out fuse Set (set of 3 units) along with Support set 417
Insulators, Base Channel, fuse barrel etc. complete as per technical
specifications, scope of works and approved drawings

316 GI Earthing pipe of 40 mm dia & 3000 mm long as per IS 1161 Nos. 415
317 GI Flat (50x6 mm) Kg. 4
318 GI wire 8SWG Kg. 6
Sl.No. Item Description Units Proposed
Erection Unit
319 GI flat (25x3 mm) Kg. 4
320 MS Danger board with Back calmps & nuts and bolts as per Nos. 10
Technical specification
321 Anti-climbing device-3.5 kgs, 2.5mm dia (12 SWG) galvanized barbed Kg. 10
wire on each 11 kV support as per scope of works & TS
322 Numbering and scheme details on each pole as per Technical Nos. 10
specification and scope of work
323 LT line for segregated feeders 0
324 8.5 m/180 kgs PCC Poles (PCC Pole as per state practice) Nos. 875
325 Foundation of PCC Supports as per scope of works, cement Nos. 1072
concreting (1:3:6) (0.268 Cmt for each support)
326 Stone pad for supports as per scope of works & drawing Nos. 10
(300x300x75 mm )
327 Single phase Glass Fiber Reinforced Polyester Sheet Moulding Nos. 143
Compound (SMC) Pole top distribution box with calmps (40x3 mm)
and nut & bolts
328 Three phase Glass Fiber Reinforced Polyester Sheet Moulding Nos. 143
Compound (SMC) Pole top distribution box with calmps (40x3 mm)
and nut & bolts
329 2Cx25 sqmm XLPE aluminium conductor cable for single phase DB Mtr. 26
incomer
330 4Cx35 sqmm XLPE aluminium conductor cable for Three phase DB Mtr. 35
incomer
331 Earthing of pole by earthing coil (with Salt & Charcoal) Nos. 50
332 8 SWG GI wire for pole,DB earthing with GI nuts, bolts & washers Kg. 6

333 Aerial Bunched XLPE Cable 1X25 (Ph) + 1X25 ( Bare messenger cum Km. 3523
neutral) + 1x16 (insulated Street lighting) sqmm

334 Aerial Bunched XLPE Cable 3X50 (Ph) + 1X35 ( Bare messenger cum Km. 5626
neutral) + 1x16 (insulated Street lighting) sqmm

335 LT pole clamp (50x8mm) (2.56 kg) with Nut and bolts set 10
336 LT Eye hook Nos. 8
337 suspension clamp Nos. 20
338 Dead end clamp Nos. 20
339 Insulation Piercing connectors/Connector type-I (AB cable to AB Nos. 10
cable)
340 Insulation Piercing connectors type-II (AB cable to Service cable) Nos. 10

341 Feeder Bifurcation (33KV Line) 0

342 Overhead 33 kV new feeder 0
343 9 meter long /400 KG PCC Poles (PCC Pole as per state practice) Nos. 1078

344 Foundation of PCC Supports as per scope of works, cement Nos. 1072
concreting (1:3:6) (0.268 Cmt for each support)
Sl.No. Item Description Units Proposed
Erection Unit
345 11 M long steel Tubular poles with welded steel base plate of Nos. 1000
Designation 410 SP 55
346 Foundation of STP Supports as per scope of works, cement Nos. 2056
concreting (1:3:6) (0.5 cmt for each support & .014 cmt. For muffing)

347 Stone pad for supports as per scope of works & drawing Nos. 10
(450x450x75 mm )
348 Red oxide paint as per TS Ltr 200
349 Aluminium paint as per TS Ltr 210
350 V type cross arm (MS Channel-100x50x6 mm 1980 mm long) welded Nos. 120
with MS angel (65x65x6 mm 935 mm long) with bolts and nuts

351 Cross arm holding clamps (MS Flat-65x8 mm) with bolts and nuts Nos. 12

352 F- Bracket (MS Channel-100x50x6 mm (475 mm long) welded with Nos. 14

MS Angle-75x75x6 mm (75 mm long) with bolts and nuts
353 DP Top channel (Channel-100X50x6mm) 2240 mm longwith bolts Nos. 114
and nuts
354 Horizontal belting Angle (Angle-65x65x6 mm) 2240 mm long with Nos. 46
bolts and nuts
355 Cross bracing Angle (Angle-65x65x6 mm) 2500 mm long with bolts Nos. 98
and nuts
356 Bracing clamp-Top clamp (Flat-65x8 mm) with bolts and nuts set 15
357 Bracing clamp-Bottom clamp (Flat-65x8 mm) with bolts and nuts set 16

358 Fish plate for jumpering Nos. 4

359 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - ACSR Dog conductor Km. 3200

360 PG clamp for dog conductor Nos. 20

361 Jointing sleeves Aluminium Nos. 25
362 Aluminium binding wire and tape Kg. 6
363 33 KV polymer Disc insulator 70 KN (B&S type) along with suitable Nos. 75
hardware fittings
364 33 KV Polymer Pin Insulators 10 KN with nuts Nos. 25
365 Earthing of pole by earthing coil (with Salt & Charcoal) Nos. 50
366 8 SWG GI wire for pole,DB earthing with GI nuts, bolts & washers Kg. 6

367 MS Danger board with Back calmps & nuts and bolts as per Nos. 10
Technical specification
368 Anti-climbing device-3.5 kgs, 2.5mm dia (12 SWG) galvanized barbed Kg. 10
wire on each 33 kV support as per scope of works & TS
369 Numbering and scheme details on each pole as per Technical Nos. 10
specification and scope of work
370 Underground 33 kV new feeder 0
371 11 M long steel Tubular poles with welded steel base plate of Nos. 1000
Designation 410 SP 55
Sl.No. Item Description Units Proposed
Erection Unit
372 Foundation of STP Supports as per scope of works, cement Nos. 2056
concreting (1:3:6) (0.5 cmt for each support & .014 cmt. For muffing)

373 Red oxide paint as per TS Ltr 200

374 Aluminium paint as per TS Ltr 210
375 DP Top channel (Channel-100X50x6mm) 2240 mm longwith bolts Nos. 114
and nuts
376 Horizontal belting Angle (Angle-65x65x6 mm) 2240 mm long with Nos. 46
bolts and nuts
377 Cross bracing Angle (Angle-65x65x6 mm) 2500 mm long with bolts Nos. 98
and nuts
378 Bracing clamp-Top clamp (Flat-65x8 mm) with bolts and nuts set 15
379 Bracing clamp-Bottom clamp (Flat-65x8 mm) with bolts and nuts set 16

380 Fish plate for jumpering Nos. 4

381 33 KV Polymer Pin Insulators 10 KN with nuts Nos. 25
382 Heat Shrinkable Jointing kit indoor for 33 KV 3×300 sq.mm. XLPE Nos. 2000
Cable
383 Heat Shrinkable Jointing kit outdoor for 33 KV 3×300 sq.mm. XLPE Nos. 2000
Cable
384 Heat Shrinkable Cable Jointing kit straight through for 33 kv 3×300 Nos. 4000
sq.mm. XLPE Cable
385 Supply and Placing of Pre-cast Concrete Manhole Chambers of size Nos. 5903
900mm x 900mm Internal Dimension x 800mm Height & 100mm
wall thickness (Heavy Duty) with Concrete Cover of 100mm
thickness in the specified locations in the trench.
386 Supply & Erection of 33 kV Single core 120 sqmm XLPE Aluminium Mtr. 35
cable for jumpering
387 Supply & Erection of Aluminum lugs -300 Sq.mm. Nos. 30
388 Supply & Erection of Cable warning tape Kg. 10
389 Fixing of Cable marker on cable route and inscription of feeder name Nos. 350
and voltage on cable marker
390 supply of 33 KV 3×300 sqmm XLPE Cable Km. 0
391 Earth digging, laying, termination/jointing, Erection, Testing & 0
commissioning of 33 KV grade 3-core 300 Sqmm XLPE power cable
underground and backfilling with bricks, sands, excavated soil as per
standard practise, levelling etc complete in all respect along with all
accessories, earthing etc. and as per TS/approved drawing.

392 Laying of 3x300 sq mm XLPE twin cable by digging of trench 1100 Rmt. 423
mm deep, 750 mm wide its boxing with brick,sand,stone slab after
laying of cable separation of cable by brick wall up to stone slab
filling and proper levelling & ramming. The ferruling of cable also
include in this work (all the material
Sl.No. Item Description Units Proposed
Erection Unit
393 Earth digging by horizontal Directional Drilling(HDD) method, 0
Laying, termination/jointing, Erection, Testing & commissioning of
33 KV grade 3-core 300 Sqmm XLPE power cable underground using
HDPE pipe complete in all respect along with all accessories,
earthing etc. and as per TS/approved drawing .

394 Laying of 33 KV 3C×300 sqmm XLPE twin Cable Rmt. 100

395 Pipe (HDPE 160 mm dia) for Cable Laying Rmt. 350
396 Earth digging by horizontal Directional Drilling(HDD) method,Laying, 0
termination/jointing, Erection, Testing & commissioning of 33 KV
grade 3-core 300 Sqmm XLPE power cable underground without
HDPE Pipes in all respect along with all accessories, earthing etc. and
as per TS/approved drawing .

397 Laying of 33 KV 3C×300 sqmm XLPE twin Cable Rmt. 600

398 Hoisting of 3Cx300 sqmm 33 KV single cable on erected double pole Nos. 3982
including GI pipe 3 mtr long 6'' dia including jumpering,dressing of
cable with required all necessary clamps and nut, bolts.(all the
material shall be arranged by contractor)

399 Testing & commissioning of 33 kV 3-core 300 Sqmm XLPE power Km. Included
underground cable
400 Earthing of pole by earthing coil (with Salt & Charcoal) Nos. 50
401 8 SWG GI wire for pole,DB earthing with GI nuts, bolts & washers Kg. 6

402 MS Danger board with Back calmps & nuts and bolts as per Nos. 10
Technical specification
403 Anti-climbing device-3.5 kgs, 2.5mm dia (12 SWG) galvanized barbed Kg. 10
wire on each 11 kV support as per scope of works & TS
404 Numbering and scheme details on each pole as per Technical Nos. 10
specification and scope of work
405 Feeder Bifurcation(11KV Line) 0
406 Overhead 11 kV New feeder 0
407 8.5 m/180 kgs PCC Poles (PCC Pole as per state practice) Nos. 875
408 Foundation of PCC Supports as per scope of works, cement Nos. 1072
concreting (1:3:6) (0.268 Cmt for each support)
409 11 M long steel Tubular poles with welded steel base plate of Nos. 1000
Designation 410 SP 55
410 Foundation of STP Supports as per scope of works, cement Nos. 2056
concreting (1:3:6) (0.5 cmt for each support & .014 cmt. For muffing)

411 Stone pad for supports as per scope of works & drawing Nos. 10
(300x300x75 mm )
412 Red oxide paint as per TS Ltr 200
413 Aluminium paint as per TS Ltr 210
Sl.No. Item Description Units Proposed
Erection Unit
414 11KV V-Type Cross-arm (M.S Channel 75X40x6mm) welded with MS Nos. 74
angel (50x50x6) (weight-10.37 kg) with bolts and nuts

415 Cross arm holding clamps (MS Flat-50x8 mm) (weight-1.33 kg) with Nos. 9
bolts and nuts
416 F- Bracket MS flat (50x8 mm) (weight- 1.56 kg) with nut and bolts Nos. 12

417 Cut point top channel (100x50x6 mm) of length 230 mm along with set 16
nut & bolts
418 Cut point bottom channel (100x50x6 mm) of length 1150 mm along set 54
with nut & bolts
419 Tapping horizontal cross arm (100x50x6 mm) of length 1020 mm set 49
along with calmps (50x8) and nut and bolts
420 Tapping top channel (100x50x6 mm) of length 256 mm along with set 19
calmps(50x8) and nut and bolts
421 DP Top channel (Channel-100X50x6mm) 2240 mm long with bolts Nos. 97
and nuts
422 Horizontal Belting Angle (Angle-50x50x6 mm) 2240 mm long with Nos. 35
bolts and nuts
423 Cross bracing Angle (Angle-50x50x6 mm) 2500 mm long with bolts Nos. 43
and nuts
424 Belting clamp-Top clamp (Flat-50x8 mm) (weight 1.4 kg) with bolts Nos. 13
and nuts
425 Belting clamp-Bottom clamp (Flat-50x8 mm) (weight 1.5 kg) with Nos. 14
bolts and nuts
426 Fish plate for jumpering Nos. 4
427 6/2.59 + 1/2.59 mm (30 sqmm Al. Area) ACSR weasel conductors Km. 1935

428 6/3.35 + 1/3.35 mm (50 sqmm Al. Area) ACSR Rabbit conductors Km. 2337

429 PG clamp for weasel conductor Nos. 10

430 PG clamp for Rabbit conductor Nos. 10
431 Distribution tie for pin insulator Nos. 20
432 Jointing sleeves Aluminium Nos. 25
433 Aluminium binding wire and tape Kg. 6
434 11 KV polymer Disc insulator 45 KN (B&S type) along with suitable Nos. 60
hardware fittings
435 11 KV Polymer Pin Insulators 5 KN with nuts Nos. 20
436 Earthing of pole by earthing coil (with Salt & Charcoal) Nos. 50
437 8 SWG GI wire for pole,DB earthing with GI nuts, bolts & washers Kg. 6

438 MS Danger board with Back calmps & nuts and bolts as per Nos. 10
Technical specification
439 Anti-climbing device-3.5 kgs, 2.5mm dia (12 SWG) galvanized barbed Kg. 10
wire on each 11 kV support as per scope of works & TS
Sl.No. Item Description Units Proposed
Erection Unit
440 Numbering and scheme details on each pole as per Technical Nos. 10
specification and scope of work
441 Underground 11 kV New feeder 0
442 11 M long steel Tubular poles with welded steel base plate of Nos. 1000
Designation 410 SP 55
443 Foundation of STP Supports as per scope of works, cement Nos. 2056
concreting (1:3:6) (0.5 cmt for each support & .014 cmt. For muffing)

444 Red oxide paint as per TS Ltr 200

445 Aluminium paint as per TS Ltr 210
446 DP Top channel (Channel-100X50x6mm) 2240 mm long with bolts Nos. 97
and nuts
447 Horizontal Belting Angle (Angle-50x50x6 mm) 2240 mm long with Nos. 35
bolts and nuts
448 Cross bracing Angle (Angle-50x50x6 mm) 2500 mm long with bolts Nos. 43
and nuts
449 Belting clamp-Top clamp (Flat-50x8 mm) (weight 1.4 kg) with bolts Nos. 13
and nuts
450 Belting clamp-Bottom clamp (Flat-50x8 mm) (weight 1.5 kg) with Nos. 14
bolts and nuts
451 Fish plate for jumpering Nos. 4
452 11 KV Polymer Pin Insulators 5 KN with nuts Nos. 20
453 Heat Shrinkable Jointing kit indoor for 11 KV 3C×185 sq.mm. XLPE Nos. 1000
Cable
454 Heat Shrinkable Jointing kit outdoor for 11 KV 3C×185 sq.mm. XLPE Nos. 1000
Cable
455 Heat Shrinkable Cable Jointing kit straight through for 11 kv 3C×185 Nos. 2500
sq.mm. XLPE Cable
456 Supply and Placing of Pre-cast Concrete Manhole Chambers of size Nos. 5903
900mm x 900mm Internal Dimension x 800mm Height & 100mm
wall thickness (Heavy Duty) with Concrete Cover of 100mm
thickness in the specified locations in the trench.
457 Supply & Erection of 11 kV Single core 95 sqmm XLPE Aluminium Mtr. 26
cable for jumpering
458 Supply & Erection of Aluminum lugs -185 Sq.mm. Nos. 20
459 Supply & Erection of Cable warning tape Kg. 10
460 Fixing of Cable marker on cable route and inscription of feeder name Nos. 350
and voltage on cable marker
461 Supply of 11 KV 3C×185 sqmm XLPE Cable Km. 0
462 Earth digging, laying, termination/jointing, Erection, Testing & 0
commissioning of 11 KV grade 3-core 185 Sqmm XLPE power cable
underground and backfilling with bricks, sands, excavated soil as per
standard practise, levelling etc complete in all respect along with all
accessories, earthing etc. and as per TS/approved drawing.
Sl.No. Item Description Units Proposed
Erection Unit
463 Laying of 11 KV 3x185 sq mm XLPE twin cable by digging of trench Rmt. 392
1100 mm deep, 750 mm wide its boxing with brick,sand,stone slab
after laying of cable separation of cable by brick wall up to stone
slab filling and proper levelling & ramming. The ferruling of cable
also include in this work (all the material)

464 Earth digging by horizontal Directional Drilling(HDD) method, 0

Laying, termination/jointing, Erection, Testing & commissioning of
11 KV grade 3-core 185 Sqmm XLPE power cable underground using
HDPE pipe complete in all respect along with all accessories,
earthing etc. and as per TS/approved drawing .

465 Laying of 11 KV 3C×185 sqmm XLPE twin Cable Rmt. 40

466 Pipe (HDPE 160 mm dia) for Cable Laying Rmt. 350
467 Earth digging by horizontal Directional Drilling(HDD) method,Laying, 0
termination/jointing, Erection, Testing & commissioning of 11 KV
grade 3-core 185 Sqmm XLPE power cable underground without
HDPE Pipes in all respect along with all accessories, earthing etc. and
as per TS/approved drawing .

468 Laying of 11 KV 3C×185 sqmm XLPE twin Cable Rmt. 550

469 Hoisting of 3Cx185sqmm 11 KV single cable on double pole including Nos. 3982
GI pipe 3 mtr long 6'' dia including jumpering,dressing of cable with
required all necessary clamps and nut, bolts.(all the material shall be
arranged by contractor)

470 Testing & commissioning of 11 KV grade 3-core 185 Sqmm XLPE Km. Included
power underground cable
471 Earthing of pole by earthing coil (with Salt & Charcoal) Nos. 50
472 8 SWG GI wire for pole, DB earthing with GI nuts, bolts & washers Kg. 6

473 MS Danger board with Back calmps & nuts and bolts as per Nos. 10
Technical specification
474 Anti-climbing device-3.5 kgs, 2.5mm dia (12 SWG) galvanized barbed Kg. 10
wire on each 11 kV support as per scope of works & TS
475 Numbering and scheme details on each pole as per Technical Nos. 10
specification and scope of work
476 Augumentation/Reconductoring of 33KV line 0
477 Overhead 33 kV Augumentation/Reconductoring 0
478 9 meter long /400 KG PCC Poles (PCC Pole as per state practice) Nos. 1078

479 Foundation of PCC Supports as per scope of works, cement Nos. 1072
concreting (1:3:6) (0.268 Cmt for each support)
480 11 M long steel Tubular poles with welded steel base plate of Nos. 1000
Designation 410 SP 55
Sl.No. Item Description Units Proposed
Erection Unit
481 Foundation of STP Supports as per scope of works, cement Nos. 2056
concreting (1:3:6) (0.5 cmt for each support & .014 cmt. For muffing)

482 Stone pad for supports as per scope of works & drawing Nos. 10
(450x450x75 mm )
483 Red oxide paint as per TS Ltr 200
484 Aluminium paint as per TS Ltr 210
485 V type cross arm (MS Channel-100x50x6 mm 1980 mm long) welded Nos. 120
with MS angel (65x65x6 mm 935 mm long) with bolts and nuts

486 Cross arm holding clamps (MS Flat-65x8 mm) with bolts and nuts Nos. 12

487 F- Bracket (MS Channel-100x50x6 mm (475 mm long) welded with Nos. 14

MS Angle-75x75x6 mm (75 mm long) with bolts and nuts
488 DP Top channel (Channel-100X50x6mm) 2240 mm longwith bolts Nos. 114
and nuts
489 Horizontal belting Angle (Angle-65x65x6 mm) 2240 mm long with Nos. 46
bolts and nuts
490 Cross bracing Angle (Angle-65x65x6 mm) 2500 mm long with bolts Nos. 98
and nuts
491 Bracing clamp-Top clamp (Flat-65x8 mm) with bolts and nuts set 15
492 Bracing clamp-Bottom clamp (Flat-65x8 mm) with bolts and nuts set 16

493 Fish plate for jumpering Nos. 4

494 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - ACSR Dog conductor Km. 3200

495 PG clamp for dog conductor Nos. 20

496 Jointing sleeves Aluminium Nos. 25
497 Aluminium binding wire and tape Kg. 6
498 33 KV polymer Disc insulator 70 KN (B&S type) along with suitable Nos. 75
hardware fittings
499 33 KV Polymer Pin Insulators 10 KN with nuts Nos. 25
500 Earthing of pole by earthing coil (with Salt & Charcoal) Nos. 50
501 8 SWG GI wire for pole,DB earthing with GI nuts, bolts & washers Kg. 6

502 MS Danger board with Back calmps & nuts and bolts as per Nos. 10
Technical specification
503 Anti-climbing device-3.5 kgs, 2.5mm dia (12 SWG) galvanized barbed Kg. 10
wire on each 33 kV support as per scope of works & TS
504 Numbering and scheme details on each pole as per Technical Nos. 10
specification and scope of work
505 Removal of existing material and shifting to MVVNL store Km. 3689
506 Underground 33 kV Augumentation/Reconductoring 0
507 11 M long steel Tubular poles with welded steel base plate of Nos. 1000
Designation 410 SP 55
Sl.No. Item Description Units Proposed
Erection Unit
508 Foundation of STP Supports as per scope of works, cement Nos. 2056
concreting (1:3:6) (0.5 cmt for each support & .014 cmt. For muffing)

509 Red oxide paint as per TS Ltr 200

510 Aluminium paint as per TS Ltr 210
511 DP Top channel (Channel-100X50x6mm) 2240 mm longwith bolts Nos. 114
and nuts
512 Horizontal belting Angle (Angle-65x65x6 mm) 2240 mm long with Nos. 46
bolts and nuts
513 Cross bracing Angle (Angle-65x65x6 mm) 2500 mm long with bolts Nos. 98
and nuts
514 Bracing clamp-Top clamp (Flat-65x8 mm) with bolts and nuts set 15
515 Bracing clamp-Bottom clamp (Flat-65x8 mm) with bolts and nuts set 16

516 Fish plate for jumpering Nos. 4

517 33 KV Polymer Pin Insulators 10 KN with nuts Nos. 25
518 Heat Shrinkable Jointing kit indoor for 33 KV 3×300 sq.mm. XLPE Nos. 2000
Cable
519 Heat Shrinkable Jointing kit outdoor for 33 KV 3×300 sq.mm. XLPE Nos. 2000
Cable
520 Heat Shrinkable Cable Jointing kit straight through for 33 kv 3×300 Nos. 4000
sq.mm. XLPE Cable
521 Supply and Placing of Pre-cast Concrete Manhole Chambers of size Nos. 5903
900mm x 900mm Internal Dimension x 800mm Height & 100mm
wall thickness (Heavy Duty) with Concrete Cover of 100mm
thickness in the specified locations in the trench.
522 Supply & Erection of 33 kV Single core 120 sqmm XLPE Aluminium Mtr. 35
cable for jumpering
523 Supply & Erection of Aluminum lugs -300 Sq.mm. Nos. 30
524 Supply & Erection of Cable warning tape Kg. 10
525 Fixing of Cable marker on cable route and inscription of feeder name Nos. 350
and voltage on cable marker
526 supply of 33 KV 3×300 sqmm XLPE Cable Km. 0
527 Earth digging, laying, termination/jointing, Erection, Testing & 0
commissioning of 33 KV grade 3-core 300 Sqmm XLPE power cable
underground and backfilling with bricks, sands, excavated soil as per
standard practise, levelling etc complete in all respect along with all
accessories, earthing etc. and as per TS/approved drawing.

528 Laying of 3x300 sq mm XLPE twin cable by digging of trench 1100 Rmt. 423
mm deep, 750 mm wide its boxing with brick,sand,stone slab after
laying of cable separation of cable by brick wall up to stone slab
filling and proper levelling & ramming. The ferruling of cable also
include in this work (all the material
Sl.No. Item Description Units Proposed
Erection Unit
529 Earth digging by horizontal Directional Drilling(HDD) method, 0
Laying, termination/jointing, Erection, Testing & commissioning of
33 KV grade 3-core 300 Sqmm XLPE power cable underground using
HDPE pipe complete in all respect along with all accessories,
earthing etc. and as per TS/approved drawing .

530 Laying of 33 KV 3C×300 sqmm XLPE twin Cable Rmt. 60

531 Pipe (HDPE 160 mm dia) for Cable Laying Rmt. 350
532 Earth digging by horizontal Directional Drilling(HDD) method,Laying, 0
termination/jointing, Erection, Testing & commissioning of 33 KV
grade 3-core 300 Sqmm XLPE power cable underground without
HDPE Pipes in all respect along with all accessories, earthing etc. and
as per TS/approved drawing .

533 Laying of 33 KV 3C×300 sqmm XLPE twin Cable Rmt. 600

534 Hoisting of 3Cx300 sqmm 33 KV single cable on erected double pole Nos. 3982
including GI pipe 3 mtr long 6'' dia including jumpering,dressing of
cable with required all necessary clamps and nut, bolts.(all the
material shall be arranged by contractor)

535 Testing & commissioning of 33 kV 3-core 300 Sqmm XLPE power Km. Included
underground cable
536 Earthing of pole by earthing coil (with Salt & Charcoal) Nos. 50
537 8 SWG GI wire for pole,DB earthing with GI nuts, bolts & washers Kg. 6

538 MS Danger board with Back calmps & nuts and bolts as per Nos. 10
Technical specification
539 Anti-climbing device-3.5 kgs, 2.5mm dia (12 SWG) galvanized barbed Kg. 10
wire on each 11 kV support as per scope of works & TS
540 Numbering and scheme details on each pole as per Technical Nos. 10
specification and scope of work
541 Augumentation/Reconductoring of 11KV line 0
542 Overhead 11 kV Augumentation/Reconductoring 0
543 8.5 m/180 kgs PCC Poles (PCC Pole as per state practice) Nos. 975
544 Foundation of PCC Supports as per scope of works, cement Nos. 1072
concreting (1:3:6) (0.268 Cmt for each support)
545 Stone pad for supports as per scope of works & drawing Nos. 10
(300x300x75 mm )
546 11KV V-Type Cross-arm (M.S Channel 75X40x6mm) welded with MS Nos. 74
angel (50x50x6) (weight-10.37 kg) with bolts and nuts

547 Cross arm holding clamps (MS Flat-50x8 mm) (weight-1.33 kg) with Nos. 9
bolts and nuts
548 F- Bracket MS flat (50x8 mm) (weight- 1.56 kg) with nut and bolts Nos. 12
Sl.No. Item Description Units Proposed
Erection Unit
549 Cut point top channel (100x50x6 mm) of length 230 mm along with set 16
nut & bolts
550 Cut point bottom channel (100x50x6 mm) of length 1150 mm along set 54
with nut & bolts
551 Tapping horizontal cross arm (100x50x6 mm) of length 1020 mm set 49
along with calmps (50x8) and nut and bolts
552 Tapping top channel (100x50x6 mm) of length 256 mm along with set 19
calmps(50x8) and nut and bolts
553 DP Top channel (Channel-100X50x6mm) 2240 mm long with bolts Nos. 97
and nuts
554 Horizontal Belting Angle (Angle-50x50x6 mm) 2240 mm long with Nos. 35
bolts and nuts
555 Cross bracing Angle (Angle-50x50x6 mm) 2500 mm long with bolts Nos. 43
and nuts
556 Belting clamp-Top clamp (Flat-50x8 mm) (weight 1.4 kg) with bolts Nos. 13
and nuts
557 Belting clamp-Bottom clamp (Flat-50x8 mm) (weight 1.5 kg) with Nos. 14
bolts and nuts
558 Fish plate for jumpering Nos. 4
559 6/2.59 + 1/2.59 mm (30 sqmm Al. Area) ACSR weasel conductors Km. 1935

560 PG clamp for weasel conductor Nos. 10

561 Distribution tie for pin insulator Nos. 20
562 Jointing sleeves Aluminium Nos. 25
563 Aluminium binding wire and tape Kg. 6
564 11 KV polymer Disc insulator 45 KN (B&S type) along with suitable Nos. 60
hardware fittings
565 11 KV Polymer Pin Insulators 5 KN with nuts Nos. 20
566 Earthing of pole by earthing coil (with Salt & Charcoal) Nos. 50
567 8 SWG GI wire for pole,DB earthing with GI nuts, bolts & washers Kg. 6

568 MS Danger board with Back calmps & nuts and bolts as per Nos. 10
Technical specification
569 Anti-climbing device-3.5 kgs, 2.5mm dia (12 SWG) galvanized barbed Kg. 10
wire on each 11 kV support as per scope of works & TS
570 Numbering and scheme details on each pole as per Technical Nos. 10
specification and scope of work
571 Removal of existing material and shifting to MVVNL store Km. 3689
572 Underground 11 kV Augumentation/Reconductoring 0
573 11 M long steel Tubular poles with welded steel base plate of Nos. 1000
Designation 410 SP 55
574 Foundation of STP Supports as per scope of works, cement Nos. 2056
concreting (1:3:6) (0.5 cmt for each support & .014 cmt. For muffing)

575 Red oxide paint as per TS Ltr 200

576 Aluminium paint as per TS Ltr 210
Sl.No. Item Description Units Proposed
Erection Unit
577 DP Top channel (Channel-100X50x6mm) 2240 mm long with bolts Nos. 97
and nuts
578 Horizontal Belting Angle (Angle-50x50x6 mm) 2240 mm long with Nos. 35
bolts and nuts
579 Cross bracing Angle (Angle-50x50x6 mm) 2500 mm long with bolts Nos. 43
and nuts
580 Belting clamp-Top clamp (Flat-50x8 mm) (weight 1.4 kg) with bolts Nos. 13
and nuts
581 Belting clamp-Bottom clamp (Flat-50x8 mm) (weight 1.5 kg) with Nos. 14
bolts and nuts
582 Fish plate for jumpering Nos. 4
583 11 KV Polymer Pin Insulators 5 KN with nuts Nos. 20
584 Heat Shrinkable Jointing kit indoor for 11 KV 3C×185 sq.mm. XLPE Nos. 1000
Cable
585 Heat Shrinkable Jointing kit outdoor for 11 KV 3C×185 sq.mm. XLPE Nos. 1000
Cable
586 Heat Shrinkable Cable Jointing kit straight through for 11 kv 3C×185 Nos. 2500
sq.mm. XLPE Cable
587 Supply and Placing of Pre-cast Concrete Manhole Chambers of size Nos. 5903
900mm x 900mm Internal Dimension x 800mm Height & 100mm
wall thickness (Heavy Duty) with Concrete Cover of 100mm
thickness in the specified locations in the trench.
588 Supply & Erection of 11 kV Single core 95 sqmm XLPE Aluminium Mtr. 26
cable for jumpering
589 Supply & Erection of Aluminum lugs -185 Sq.mm. Nos. 20
590 Supply & Erection of Cable warning tape Kg. 10
591 Fixing of Cable marker on cable route and inscription of feeder name Nos. 350
and voltage on cable marker
592 supply of 11 KV 3C×185 sqmm XLPE Cable Km. 0
593 Earth digging, laying, termination/jointing, Erection, Testing & 0
commissioning of 11 KV grade 3-core 185 Sqmm XLPE power cable
underground and backfilling with bricks, sands, excavated soil as per
standard practise, levelling etc complete in all respect along with all
accessories, earthing etc. and as per TS/approved drawing.

594 Laying of 11 KV 3x185 sq mm XLPE twin cable by digging of trench Rmt. 392
1100 mm deep, 750 mm wide its boxing with brick,sand,stone slab
after laying of cable separation of cable by brick wall up to stone
slab filling and proper levelling & ramming. The ferruling of cable
also include in this work (all the material)
Sl.No. Item Description Units Proposed
Erection Unit
595 Earth digging by horizontal Directional Drilling(HDD) method, 0
Laying, termination/jointing, Erection, Testing & commissioning of
11 KV grade 3-core 185 Sqmm XLPE power cable underground using
HDPE pipe complete in all respect along with all accessories,
earthing etc. and as per TS/approved drawing .

596 Laying of 11 KV 3C×185 sqmm XLPE twin Cable Rmt. 40

597 Pipe (HDPE 160 mm dia) for Cable Laying Rmt. 350
598 Earth digging by horizontal Directional Drilling(HDD) method,Laying, 0
termination/jointing, Erection, Testing & commissioning of 11 KV
grade 3-core 185 Sqmm XLPE power cable underground without
HDPE Pipes in all respect along with all accessories, earthing etc. and
as per TS/approved drawing .

599 Laying of 11 KV 3C×185 sqmm XLPE twin Cable Rmt. 550

600 Hoisting of 3Cx185sqmm 11 KV single cable on double pole including Nos. 3982
GI pipe 3 mtr long 6'' dia including jumpering,dressing of cable with
required all necessary clamps and nut, bolts.(all the material shall be
arranged by contractor)

601 Testing & commissioning of 11 KV grade 3-core 185 Sqmm XLPE Km. Included
power underground cable
602 Earthing of pole by earthing coil (with Salt & Charcoal) Nos. 50
603 8 SWG GI wire for pole, DB earthing with GI nuts, bolts & washers Kg. 6

604 MS Danger board with Back calmps & nuts and bolts as per Nos. 10
Technical specification
605 Anti-climbing device-3.5 kgs, 2.5mm dia (12 SWG) galvanized barbed Kg. 10
wire on each 11 kV support as per scope of works & TS
606 Numbering and scheme details on each pole as per Technical Nos. 10
specification and scope of work
607 Installation of capacitor bank 0
608 Installation of capacitor bank at 33/11 kV Power Transformer 0
609 12.65 kV, 1980 kVAr, 3-Phase, 50 C/s, Outdoor Type , Capacitor bank Nos. 52905
having two variable step of 792 Kvar & one Variable steps of 396
kVAr. Bank shall be complete with Capacitor units of 264/132
kVAr,Aluminium busbars, Pin & Post insulators, Expulsion fuses etc.

610 12.65 KV,3960 KVAr, 3-Phase, 50 C/s, Outdoor type, Capacitor bank Nos. 58905
having two variable step of 792 KVAr & two variable steps of 1188
KVAr. Bank shall be complete with Capacitor units of 264/396 KVAr,
Aluminimum busbars, pin & post insulators, Expulsion fuses etc.

611 Sign board of size 6x4 sqfeet, mounting angels, excavation, cement Nos. 7109
concreting, foundation, painting etc.
Sl.No. Item Description Units Proposed
Erection Unit
612 Sign board of size 1x1 sqfeet with pole mounting clamp, painting Nos. 20
etc.
613 Installation of capacitor bank at 11/0.415 kV Distribution 0
Transformer
614 LT Pole cap Gas/Resin filled MPP (Metalized polypropylene) Shunt Nos. 604
Capacitors 440V, 10 KVAr, 3 Phase 50 Hz, IP65 with fault indication.

615 LT Pole cap Gas/Resin filled MPP (Metalized polypropylene) Shunt Nos. 1124
Capacitors 440V, 25 KVAr, 3 Phase 50 Hz, IP65 with fault indication.

616 LT Pole cap Gas/Resin filled MPP (Metalized polypropylene) Shunt Nos. 1156
Capacitors 440V, 40 KVAr, 3 Phase 50 Hz, IP65 with fault indication.

617 Suitable pole clamps with nuts and bolts set 10

618 1Cx25 sqmm XLPE cable along with connecting clamps for Mtr. 8
connection of DTR with Capacitor bank
619 Stay Set (Galvanised) with 50x8 mm stay clamps, guy insulator , 0
anchor plate (200x200x6mm) , nut bolts, 1 Nos turn-buckle, 1.8 m
long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI
stranded wire complete as per technical specification, approved
drawings and scope of work including foundation of stay support in
each stay set as per scope of works

620 Stay Rod 16x1800 mm complete as per Technical specification, Nos. 80

scope of work and tender drawing
621 Stay Wire 7/10 SWG Kg. 6
622 Stay Clamp- (Flat-50x8 mm) (weight-1.5 kg)with bolts and nuts set 14

623 Stay Guy insulator LT Nos. 5

624 Stay Guy insulator HT (11 KV) Nos. 5
625 stay thimble Nos. 5
626 Hellically formed end fitting set 10
627 Concreting of Stay Rod ( 0.2 cmt cement concreting in mixture Nos. 800
(1:3:6)
628 Stay Set (Galvanised) with 50x8 mm stay clamps, guy insulator , 0
anchor plate (300x300x8mm) , nut bolts, 1 Nos turn-buckle, 1.8 m
long, 20 mm diameter solid GS stay rod & 7/4.00 mm dia GI
stranded wire complete as per technical specification, approved
drawings and scope of work including foundation of stay support in
each stay set as per scope of works

629 Stay Rod 20x1800 mm complete as per Technical specification, Nos. 80

scope of work and tender drawing
630 Stay Wire 7/8 SWG Kg. 6
631 Stay Clamp- (Flat-50x8 mm) (weight-1.8 kg) with bolts and nuts set 14
Sl.No. Item Description Units Proposed
Erection Unit
632 Stay Guy insulator for 33KV line Nos. 5
633 stay thimble Nos. 5
634 Hellically formed end fitting set 10
635 Concreting of Stay Rod ( 0.3 cmt cement concreting in mixture Nos. 800
(1:3:6)
Total