Structure group 50
PRECISION IN THE 01/16
MEASURING TECHNIQUE
INDUSTRIAL THERMOMETERS
with V-shaped case DIN 16181 - 16195
Measuring technique temperature
_________________________________________________________________
5000 page 1.0
DIN 16181 to DIN 16195
The measurement principle
Expansion thermometer, massive glass thermometers with optically increased display, in order to achieve
a good readability.
Measuring technique
Massive glass thermometers are embedded in the centre the two inclining side pieces, and secured from
vibrations to a very large extent with rubber pads.
The reaction velocity is increased by the fact that between the glass thermometer and the internal wall of
the temperature sensor a copper braided hose is arranged.
With the installation a heat conducting paste is useful.
Temperature measuring points should be free of vibrations.
Case sizes:
110 x 36, 150 x 36 and 200 x 36 mm.
Solid cases:
Brass- or silver- coloured
Inscription:
To a very large extent scratch proof and resistant to corrosive atmosphere.
Measuring liquid:
-60 + 40°C, red Toluol filling, white backed
-30 +200°C, blue special filling, white backed
over +300°C, mercury filling, yellow backed
or mercury filling blue shining patent capillaries (particularly clearly readable).
Division:
°C standard, °F or double scale °C and °F available
Threaded sockets:
Standard temperatures up to 300°C brass, over 300°C steel
on request stainless steel 1.4571
Protective pipes:
Execution according to DIN 43772 or Armatherm data sheets for protective pipes, special materials
are available e.g. Hastelloy, Inconel, Titan, special brass surface coatings are possible.
Contact thermometer
With one or more firmly melted in contacts.
Special data sheet please request.
Subject to alteration, even of technical kind. 01/16
Measuring technique temperature
_________________________________________________________________
INDUSTRIAL THERMOMETERS DIN 16181 - 16195 5000 page 2.0
Code-Nr.: Ordering data,
Execution of case short version
straight 52
angle 90° with grooved nipple 53
angle 135° 54
angle 90° with ball joint 55
angle 135° with ball joint 56
Case sizes
110 x 36 mm 5
150 x 36 mm 6
200 x 36 mm 7
Case colours
brass coloured 5
silver coloured 6
Connection
plain 2
rigid thread nipple 4
loose coupling nut 5
Thread size d1
G ½“ P
G ¾“ Q
M 24 x 1,5 H
Feeler ø d
6,5 mm 06
8 mm 08
10 mm ( Standard ) 10
Stem and connection of
steel 2
brass 3
stainless steel, 1.4571 8
fitting length l1 100 mm
Range acc. DIN
case 100 x 36 case 200 x 36
-60 +40°C 00 -60 +40°C 00
0 +100°C 08 -30 +50°C 02
0 +120°C 09 0 +100°C 08
0 +120°C 09
case 150 x 36 0 +160°C 10
-60 +40°C 00 0 +200°C 11
0 +100°C 08 0 +300°C 13
0 +120°C 09 0 +400°C 14
0 +160°C 10 0 +500°C 15
0 +200°C 11 0 +600°C 16
Dual scale °C and °F 1
Additional equipment: see protective sleeves structure group 40
Connection
Subject to alteration, even of technical kind. 01/16
Measuring technique temperature
_________________________________________________________________
INDUSTRIAL THERMOMETERS DIN 16181 - 16186 5000 page 3.0
Thermometer inserts according to DIN, no matter which make, can be fitted at any time.
Subject to alteration, even of technical kind. 01/16
Measuring technique temperature
_________________________________________________________________
INDUSTRIAL THERMOMETERS DIN 16189 - 16191 5000 page 4.0
Thermometer inserts according to DIN, no matter which make, can be fitted at any time.
Subject to alteration, even of technical kind. 01/16
Measuring technique temperature
_________________________________________________________________
5000 page 5.0
Contact thermometer
with one or more firmly melted in contacts,
switching point according to.
Model 1
with 1 m connection cable at top,
with protective spiral
Model 2
with Harting plug connection,
protection IP 44, only for casing
size 110 x 30 mm
Electrical data of the thermometer
max. 20 mA at 24 V DC
Suitable contact protection relay
Typ MSR 010 for single contact
Typ MSR 020 for double contact
Electrical data of the protection relay
Supply voltage : 230 V -10% +6%
Control voltage : 50 - 60 Hz
Pulse pause ratio : 1 : 100
Contact rating : max. 1860 VA
Contact voltage max. : 250 V, 50 Hz (100 V DC)
Subject to alteration, even of technical kind. 01/16
