ZM
201 SERIES
Indicators for daily
weighing tasks with
powerful built-in
applications.
Technical Specification
DESCRIPTION
ZM201 Series indicators are ideal for applications that require a basic weighing indicator for performing
Zero, Tare and Print functions. Their simple yet powerful design makes them the perfect choice for
connecting with bench, platform or floor scale and bin/tank/hopper (vessel) scales.
SPECIFICATIONS
GENERAL
Operating Applications General weighing, general weighing with accumulation, checkweighing, counting, peak measurement,
batching and remote display
Calibration Two to five points stored
Analog To Digital Measurement Rate 80 Hz
Unit Of Measure Two, configurable (pounds, kilograms, ounce, gram, pound/ounce, custom)
Capacity Selections 9,999,999 with decimal located zero to five places
Incremental Selections Multiples and sub-multiples of 1, 2, 5
Programmable Selections Zero range, motion detection, automatic zero tracking, five point linearization
Time And Date Battery backed up time/date/year (12 hr or 24 hour format)
Internal Resolution 53,687,100 counts per mV/V per second
Digital Filtering Harmonizer filtering with adaptable constant and threshold
Self Diagnostics Display, keys, inputs, outputs, serial port
ELECTRICAL
Power Requirements Line voltage: 90 VAC to 264 VAC (110-240 VAC nominal), frequency 50 or 60 Hz, 12 to 36 VDC
Power consumption: estimated at 150 mA at 12 VDC for one weight sensor and
180 mA at 12 VDC for four weight sensors
Excitation 5 VDC, short circuit protected
Supports up to four 350 ohm weight sensors
4 or 6 conductors with sense leads
Detachable plug connectors
Analog Signal Input Range -1 m/V/V to 5 mV/V
Analog Signal Sensitivity 0.1 µV/V/divisions minimum
0.5 µV/V/divisions recommended
USER INTERFACE
Operational Keys Tare, Select, Zero, Print, Units, F1, On/Off (no keys on signal processor)
Status Annunciators Center of Zero, Motion, Gross, Net, Tare, Count, Print, Battery Status, Setpoint 1, Setpoint 2, Setpoint 3,
Over/Under/Accept bar graph or fill bar graph, lb, kg, Preset Tare, Total,
(Custom unit of measure– lb/oz, ton, gram, configurable), Active Ethernet connection
Keypad 7 key chemical resistant polycarbonate
ZM201 SERIES Technical Specification
Display ABS: TN backlit 7-digit seven segment display with 1.2 in / 30 mm high digits .45 [11.43 mm] 7.50 [190.50 mm]
Stainless steel: TN backlit 7-digit seven segment display with 0.5 in
4.28/in13 mm high digits
108.7 mm
3.88 in
98.4 mm
Panel mount: TN backlit 7-digit seven segment display with 0.5 in / 13 mm high digits 2.03 [51.59 mm]
Signal processor: No display
Displays have annunciators for status and mode identification 7.90 in 2.875 in
73.0 mm
200.7 mm
Display Rate Selectable (1, 2, 5, 10) times per second 4X R.16 [R4.00 mm]
INPUT/OUTPUT
Remote Inputs Three logic level inputs for Zero, Print, 4.28 in
4.78 [121.41 mm] 3.88 in
3.03 [76.99 mm]
Tare, Units, or Select 108.7 mm 98.4 mm
Standard Outputs Three set point outputs, open collector design
.84 [21.43 mm]
.45 [11.49 mm]
Communications Two serial ports: 7.90 in
200.7 mm
.99 [25.04 mm]
2.11 in
53.5 mm 2.11 [53.50 mm]
- Comm 1 RS232, no handshaking
8.40 [213.36 mm]
Signal Processor
- Comm 2 RS232, no handshaking
Ethernet: TCP/IP, DHCP, Static IP
Protocols (all ports):
4.28 in 3.88 in
- SMA Broadcast, Remote Display, and NCI 108.7 mm 98.4 mm
ZM201 Signal Processor Modbus/TCP
Circuitry Protection RFI, EMI and ESD protection 7.90 in 2.11 in
200.7 mm 53.5 mm
PHYSICAL Panel Mount
Operating Temperature Compliance with legal-for-trade requirements 5.78 in
146.8 mm
Approval: 14° to 104° F / -10° to 40° C
at 10 to 90% relative humidity, non-condensing
Industrial: -4° to 140° F / -20° to 60° C 6.33
6.50 in
at 10 to 90% relative humidity, non-condensing 165.0 mm 160.8
Enclosure Stainless steel: 304 brushed stainless steel IP66 with tilt stand/
mounting bracket 30° 60°
Plastic: ABS plastic IP20 with rubber feet 9.65 in 3.74 in 4.16 in .06 in
Panel mount: Stainless steel panel mount IP66 245.0 mm 95.0 mm 105.6 mm 1.5 mm
Weight ABS: 3.87 lb / 1.75 kg ABS 4.01 in
101.8 mm
Stainless steel: 7.34 lb / 3.32 kg 9.63 in
Panel mount: 4.18 lb / 1.89 kg 244.6 mm
Signal processor: 4.25 lb / 1.93 kg 8.25 in
209.6 mm
3.55 in
90.2 mm
Dimensions See drawings
APPROVALS
6.5 in 0.50 in 6.63
Patent US Patent 672,262 165.1 mm 12.70 mm 168.28
8.75 in
Agencies NTEP (US) Class III/IIIL 10,000 d CC# 13-017 222.3 mm
OIML (European and UK) Class III 6,000 d 4.0 in
Measurement Measurement Canada AM-5902C† 101.6 mm
Canada Approved
AM-5902C
Australia (NMI)
MID R61
South Africa* 8.43 in
214.1 mm
5.0 in
127.0 mm
New Zealand * Pending Stainless Steel
India †
Signal Processor
CE not approved by
UL/cUL Measurement Canada
EC More online
OPTIONS
www.averyweigh-tronix.com/zm201
Battery Pack Internal NiMH rechargeable pack providing 18 hours operation
on a single weight sensor system and 14 hours on a four › Technical
weight sensor system. For application environments that
operate above 50° F / 10° C, the maximum charge time is five
specifications
hours. For application environments that operate and charge › User manuals
below 10° C, the charger circuit will utilize trickle charging
and full recharge will take up to 23 hours. › News and
ZM-OPTO Provides setpoint interface information
Ethernet Watertight Gland Rubberized and sealed
AC to DC Power In-Line AC to DC power module
Pole Mounting Kit For ABS model
www.averyweigh-tronix.com
Avery Weigh-Tronix is an ITW company
Avery Weigh-Tronix is a trademark of the Illinois Tool Works group of companies whose ultimate parent company is Illinois Tool Works Inc (“Illinois
Tool Works”). Copyright © 2020 Illinois Tool Works. All rights reserved. This publication is issued to provide outline information only and may not be
regarded as a representation relating to the products or services concerned. This publication was correct at the time of going to print, however Avery zm201_spec_501112.indd
Weigh-Tronix reserves the right to alter without notice the specification, design, price or conditions of supply of any product or service at any time. V5 AWT35-501112
