QuickSpecs HP BladeSystem Matrix

Overview

Starter Kit

Starter Kit - Front Starter Kit - Rear

1. HP BladeSystem c7000 enclosure, single phase 1. HP Virtual Connect Flex-10 10-Gb Ethernet modules
(redundant pair)
2. HP ProLiant BL460c G6 (half-height) server blade 2. HP Virtual Connect 8Gb 24-Port FC modules (redundant
(recommended configuration for central management server, pair)
hosting the management software, but can be substituted)
3. 15 half-height device bays available for populating with
server blades
4. Complete Infrastructure Operating Environment licenses
(Insight software)
5. Onsite BladeSystem Matrix Starter Kit Implementation service
6. HP 10000 G2 Series rack, and rack and power options
NOTE: Rack is not included with the Matrix Starter Kit
7. Existing or supported Fibre Channel SAN or choose this
recommended option: HP StorageWorks 4400 Enterprise
Virtual Array Starter Kit (StorageWorks EVA4400 controller
pair enclosure with embedded switches, drive enclosure,
eight 450-GB 10K-rpm 4-Gb dual-port FC EVA M6412
hard disk drives, CommandView and SmartStart media and
4x 1-TB Licenses To Use)

Expansion Kit

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 1

QuickSpecs HP BladeSystem Matrix
Overview

Expansion Kit - Front Expansion Kit - Rear

1. HP BladeSystem c7000 enclosure, single phase 1. HP Virtual Connect Flex-10 10-Gb Ethernet modules
(redundant pair)
2. 16 half-height device bays available for populating with 2. HP Virtual Connect 8Gb 24-Port FC modules (redundant
server blades pair)
3. Complete Infrastructure Operating Environment licenses
(Insight software)
NOTE: All HP BladeSystem Matrix infrastructure ships with licensed disaster recovery protection for both physical and virtual servers, in
coordination with data replication provided by StorageWorks EVA Continuous Access software. Disaster recovery protection can be
achieved by implementing a secondary infrastructure at a remote location, and enabling storage replication between the two sites.

What's New
Updated the BladeSystem Matrix Starter Kit's central management server (CMS) with additional memory and other
enhancements (part number changed to 570775-B22). This is a default CMS server SKU that can be substituted with another
server if desired to meet a customer's unique requirements or preferences.

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 2

QuickSpecs HP BladeSystem Matrix
Overview
At A Glance
HP BladeSystem Matrix is a converged infrastructure that delivers an operationally efficient data center infrastructure without high
upfront or ongoing costs. It is built upon the core technologies of HP BladeSystem, HP Virtual Connect, HP Insight software and
implementation services. It also includes optimized support for HP StorageWorks and factory integration and onsite services.

BladeSystem Matrix delivers a converged infrastructure built on well-established HP technologies and functionality including:

HP BladeSystem c-Class c7000 enclosure, server blades, Virtual Connect with Flex-10, and Thermal Logic
HP Insight software
Factory Integration, Factory Express, and Technology Services
HP StorageWorks 4400 Enterprise Virtual Array Starter kit (recommended option)

Also available worldwide are HP Financial Services offerings unique to Matrix, including 0% lease and Pay as You Grow payment
programs. Instant capacity support for HP ProLiant server blades in Matrix is available in the U.S. only, and other programs and
incentives are available regionally.

For more information above HP BladeSystem Matrix information, see: http://www.hp.com/go/matrix

For more information about HP BladeSystem, see: http://www.hp.com/go/bladesystem
For more information about HP Insight software, see: http://www.hp.com/go/insight
For more information about StorageWorks, see: http://www.hp.com/go/storageworks
For more information about Factory Express, see: http://h71028.www7.hp.com/enterprise/cache/97688-0-0-225-121.html

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 3

QuickSpecs HP BladeSystem Matrix
HP BladeSystem Matrix

How to order HP Ordering HP BladeSystem Matrix

BladeSystem Matrix
The method for purchasing HP BladeSystem Matrix is simple. Start by ordering a HP BladeSystem Matrix
Starter Kit, which contains the infrastructure needed for a fully-working environment supporting up to 16
HP ProLiant half-height server blades (Integrity blades may also be ordered as noted below, although
additional management software licenses must be additionally purchased). Add Expansion Kits now or in
the future to expand your HP BladeSystem Matrix infrastructure with additional infrastructure and blades.
The central management server (CMS) host implemented in the Starter Kit simply extends its domain to
manage additional infrastructure that might be added by adding Expansion Kits.

NOTE: The Expansion Kit may also be purchased separately.

NOTE: Expansion Kits purchased must be co-located with the Starter Kit(s) to which they are connecting
to.
NOTE: For detailed ordering information please see the Configuration Information Factory Integrated
Models section of this QuickSpecs.

With all HP BladeSystem Matrix Starter and Expansion Kit orders, the following services are included:

Factory services to default configure, rack, and cable the infrastructure in a rack,
Verify and update firmware for the entire solution being purchased (the BladeSystem Matrix kits
and the supported blades and options purchased with those kits) to the latest current BladeSystem
Matrix firmware release set. This ensures that the BladeSystem Matrix solution will leave the factory
with the right levels of firmware needed for the end to end solution to be successful. (For specific
version numbers supported and required, please refer to the HP BladeSystem Matrix Compatibility
Chart on http://www.hp.com/go/matrixcompatibility)
Coordinate hand-off to Technology Services (TS) or authorized partner. A TS or partner project
manager is assigned for managing pre-engagement and assigning a team of engineers to
perform the implementation service at the customer's site.

Factory Express custom configuration services should be added to the order if a StorageWorks EVA4400
configuration is also purchased with the Starter (or Expansion) Kits, or if any other custom factory services
are needed. Factory Express uses its standard processes for capturing customer intent and requirements,
as well as providing order verification services.

While Factory Integration/Factory Express are building the BladeSystem Matrix environment for a given
customer, an assigned project manager from Technology Services will start managing a team of TS
engineers to begin planning the rollout of the implementation service, including engaging with the
customer on environmental requirements and related details. TS engineers will start the actual
implementation on the Matrix equipment as soon as possible after its arrival date at the customer site.

NOTE: The account team must initiate contact with a Factory Express Engagement Project Manager
(EPM) to initiate the Factory Express processes, including communication of the Customer Intent
Document (CID).

The Technology Services BladeSystem Matrix Starter Kit Implementation Service is detailed in a further
section below.

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 4

QuickSpecs HP BladeSystem Matrix
HP BladeSystem Matrix
BladeSystem Matrix The BladeSystem Matrix Infrastructure Operating Environment delivers the functionality described below.
Infrastructure Operating Orchestrated provisioning of services
Environment (HP Insight
software) Application infrastructure design console with repeatable, best practice templates
Self-service, automated provisioning of infrastructure with workflow
Infrastructure services catalog
Cross-platform, multi-OS server deployment
Storage LUN configuration and presentation/zoning (with purchase of EVA4400)

Optimization and lifecycle management

Virtual machine controls and synchronized integration with VMware vCenter, Microsoft System
Center, and common enterprise management software via APIs
Ongoing capacity management
Consolidation what-if analysis and comparison reports
Unlimited x2V and x2ProLiant migrations (for x86 servers)
Advanced visualization of infrastructure resources including virtual machines
Remote console and remote media for servers
Power management and dynamic power capping
Pre-defined power policies to direct power to servers providing critical business services
Security and patch management
Virtual Connect centralized management

Availability and proactive support

Built-in disaster recovery management (physical to virtual, physical to physical, and virtual to
virtual)
Automated server failover with spare servers
Health monitoring and alerting including pre-alerting for server, network, and storage resources
Secure remote monitoring, notification/advisories, dispatch and proactive service support

BladeSystem Matrix In addition to the BladeSystem Matrix Implementation Service, HP highly recommends HP Education
Starter Kit Implementation Services (for customer training and education) and Additional Technical Services, as well as in-depth
Service (onsite), plus installation or implementation services as may be needed. These recommended services are listed in the
additional services "Service and Support Offerings" section later in this document. The onsite BladeSystem Matrix
Implementation Service for the Starter Kit consists of these steps:

Upon delivery to customers site, unpack and inspect for damages

Integrate hardware in to customers environment, power, network cabling
Installation and configuration of the central management server (CMS)
Installation and configuration of the software required for management
Deployment of operating systems to configured LUNs on the optionally purchased StorageWorks
EVA 4400 SAN or an existing SAN
NOTE: HP StorageWorks EVA with Continuous Access is required to fully implement disaster
recovery capability with the recovery functionality included with BladeSystem Matrix.
1 HP server blade running a native OS of the customer's choice (Windows, Linux) on a boot
LUN
2 HP server blades each running a single hypervisor of the customer's choice (VMware ESX
or Microsoft Hyper-V), each on their own boot LUN (licenses are customer provided), each
on their own boot LUN (licenses are customer provided)
Configuration of up to 2 VMs

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 5

QuickSpecs HP BladeSystem Matrix
HP BladeSystem Matrix
1 HP server blade installed and configured to be a target for a blade move
Configure up to two physical target server operating systems to boot from SAN
Orientation of the BladeSystem Matrix solution
Navigation through installed components and all management software
Review of the configured hardware components and their configuration
Review of the completed system topology
How to call HP for support
Availability of additional services, educational services, etc. See:
http://h20219.www2.hp.com/services/cache/10746-0-0-225-121.html and
http://www.hp.com/services/insight and http://www.hp.com/learn/proliant
BladeSystem Matrix demonstrations. See: http://www.hp.com/go/matrix

Warranty services The HP BladeSystem Matrix infrastructure is covered by a global limited warranty and supported
by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic
support and repair is available for three years from date of purchase. Support for software and
initial setup is available for 90 days from date of purchase. Additional support may be covered
under the warranty or available for an additional fee.
Offered for BladeSystem Matrix are "uplift" HP Care Pack Services options that extend warranty
service period up to 3-, 4-, or 5- years across the entire hardware and software infrastructure from
the following default included levels of warranty support:.
Enclosure: Three-year parts and labor, on-site limited global warranty. Certain restrictions
and exclusions apply
Enclosure options: fans, power supplies, Onboard Administrator, 1 Year parts only or
enclosure warranty
HP Virtual Connect interconnects: 1 Year parts and labor, on-site regardless of the warranty
period for the system in which they are installed
HP Insight software: 1 Year 24 x 7 Technical Support and Update Service
HP Storage Fibre Channel switches have a maximum warranty period of one (1) year
regardless of the warranty period for the system in which they are installed

For additional information, see: http://www.hp.com/go/bladesystem and

http://www.hp.com/services/insight.

BladeSystem Matrix BladeSystem Matrix management software includes one year of 24 x 7 HP Software Technical Support
Orchestration and Update Service. This service provides access to HP technical resources for help in resolving software
Environment (HP Insight implementation or operations problems. The service also provides access to software updates and
software) Support reference manuals either in electronic form or on physical media as they are made available from HP.

With this service, HP BladeSystem Matrix users benefit from expedited problem resolution and proactive
notification and delivery of software updates.

As part of your implementation service, HP services personnel or your authorized provider will activate
your HP Software Technical Support and Update Service for HP Insight software at:
http://www.hp.com/services/insight.

Your Service Agreement Identifier (SAID) will be delivered to you after registration. After you have
received your SAID, you can go to the software update manager (SUM) web page to view your contract
online and elect electronic delivery (in addition to standard media-based updates). For more information
about this service, see: http://www.hp.com/services/insight.

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 6

QuickSpecs HP BladeSystem Matrix
HP BladeSystem Matrix
HP offers a number of software support services, many of which are provided to customers at no
additional charge.

Join the Discussion at: http://www.itrc.hp.com

The HP Support Forum is a community-based, user supported tool for HP customers to participate in
discussions amongst the customer community about HP products. For discussions related to HP Insight
software, see the "Management Software and System Tools" area.

HP is proactive in its approach to the quality and security of all its management software. Be sure to
check the website often for the latest down-loadable security updates. To initiate a subscription to receive
future HP Security Bulletins via e-mail:
http://h30046.www3.hp.com/driverAlertProfile.php?regioncode=NA&langcode=USENG&jumpid
=in_SC-GEN__driverITRC&topiccode=ITRC

HP Worldwide Customer Service contact numbers are available at:

http://www.hp.com/country/us/en/wwcontact.html.

HP Financial Services To support customers' transition, HP Financial Services (HPFS) can help in a way that you may not have
considered. HPFS can help you invest in your business while preserving precious capital via Pay as You
Grow for HP BladeSystem Matrix, an offer that allows customers to lower their first-year cash outflows by
more than 65% while giving them the flexibility to align spending with forecasted usage in subsequent
years.

For a limited time, get the technology your business needs and the flexibility and affordability you
deserve with our low-rate lease offers for BladeSystem Matrix, as low as 0% for 36 months in some
participating countries around the world. Contact your local HP Financial Services Representative. In the
United States, call 1-888-277-5942. In Canada, dial 1-800-HP-LEASE. For more information please
visit: www.hp.com/hpfinancialservices for links to HP Financial Services around the world.

ProLiant Instant Capacity The ProLiant Instant Capacity program (U.S. only) provides cost-effective "just in time" inventory
Program (U.S. only) protection. ProLiant iCAP is designed to provide "ready to run" servers for immediate activation, while
avoiding up-front costs.

Supported servers include BladeSystem ProLiant (and ML/DL) servers deployed via Direct
fulfillment
Uses HP Systems Insight Manager, automated, billing and tracking process upon activation and
consumption
Servers can be pre-racked, pre-imaged, and tested in preparation of activation
Amortize total blade infrastructure (rack, enclosure, power, interconnects) over the total number of
blades
Warranty commences once customer has been invoiced (title exchanges)
Price captured at time of shipment
Ability to reset target inventory levels in real time

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 7

QuickSpecs HP BladeSystem Matrix
HP BladeSystem Matrix
Factory Express Portfolio For HP BladeSystem Matrix, HP Factory Express services are added if the StorageWorks EVA4400 SAN is
for Servers and Storage purchased with the BladeSystem Matrix Starter Kit. If other custom requirements or intents are required
for a given customer's BladeSystem Matrix order, Factory Express capabilities may also be called upon.
HP Factory Express offers configuration, customization, integration and deployment services for HP
servers and storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging and custom packaging. HP products supported through Factory Express include: a wide array of
servers and storage: HP Integrity servers, HP ProLiant servers, HP ProLiant & Integrity c-Class
BladeSystem server blades, HP 9000 servers as well as the StorageWorks MSAxxxx, VA7xxx, EVA, and XP
storage products, rackable tape libraries and configurable network switches.

For more information on Factory Express services please contact your sales representative or go to:
http://www.hp.com/go/factory-express

HP Enterprise The HP eConfigure Enterprise Configurator now provides factory default racking for our HP hardware
Configurator portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our
valued customers. If you require "custom" rack configuration, please contact HP's Customer Business
Center or an Authorized Partner for assistance.

Rack Airflow Rack 10000 G2 series cabinets

Requirements The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The HP 10000 G2 Series racks provide enhanced airflow for
maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.

NOTE: For operation with the DC Input Module the HP 10000 Series rack extension is required to allow
DC power cabling to be installed.
CAUTION: BladeSystem Matrix infrastructures are best fulfilled by HP with the HP 10000 Series rack.
However, if a third-party rack is used, observe the following additional requirements to ensure adequate
airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you must
allow 830 square inches (5,350 sq cm) of holes evenly distributed from top to bottom to permit
adequate airflow (equivalent to a required 64 percent open area for ventilation).
The clearance from face of rack to inside of the front door needs to be a minimum of 1.75".
Side: The clearance between the installed rack component and the side panels of the rack needs
to be a minimum of 2.75 inches (7 cm).
Depth: a minimum of 39.4 inches (1000mm) for AC power, 47 inches (1200mm) for DC power
input
Adjustable rack rails are shipped with each enclosure:
Minimum rail length: 25 inches (635mm)
Maximum rail length: 34 inches (864mm)
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This
arrangement ensures proper airflow. Using a rack without blanking panels will result in improper cooling
that can lead to thermal damage.

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 8

QuickSpecs HP BladeSystem Matrix
Ordering BladeSystem Matrix

Configuration Information Factory Integrated Models - HP BladeSystem Matrix - Starter Kit

NOTE: This section lists the required steps for ordering a HP BladeSystem Matrix.
NOTE: All HP BladeSystem Matrix infrastructure ships with licensed disaster recovery protection for both physical and virtual servers,
in coordination with data replication provided by StorageWorks EVA Continuous Access software. Disaster recovery protection can
be achieved by implementing a secondary infrastructure at a remote location, and enabling storage replication between the two
sites.
NOTE: To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator or contact your
local sales representative for additional information on product offerings and requirements.
NOTE: FIO indicates that this option is a Factory Integrated Option.

Step 1: Select HP 10000 G2 Series Rack (Recommended, per Notes immediately below)
NOTE: For additional HP Rack information please visit:
http://h18004.www1.hp.com/products/servers/proliantstorage/racks/index.html
NOTE: For additional Rack Options please see the "Choose Additional Options" section of this QuickSpecs.
NOTE: The Starter Kit is recommended to be ordered with an HP rack. When not ordering with a rack, it is necessary for the
customer to rack any BladeSystem Matrix enclosures in a rack prior to HP arriving onsite to complete the BladeSystem Matrix
Implementation Service. You may purchase the HP Install c7000 Enclosure and Server Build Service to assist with onsite racking and
cabling of BladeSystem Matrix enclosures into a rack. See the "Service and Support Offerings" section later in this document for the
part numbers.
HP Rack Series HP 10000 G2 Series racks (Graphite Metallic)
10642 G2 (42U) Rack Cabinet - Pallet AF001A
10642 G2 (42U) Rack Cabinet - Shock Pallet AF002A
10642 G2 (42U) Rack Cabinet - Crated AF003A
10642 G2 (42U) Rack Shock Pallet- for field racking (NA only) AF007A
10636 G2 (36U) Rack Cabinet - Shock Pallet AF011A
10636 G2 (36U) Rack Cabinet - Crated AF012A
10636 G2 (36U) Rack Cabinet, with Extension - Shock Pallet AF013A
10636 G2 (36U) Rack Cabinet, without door - Shock Pallet AF014A
10622 G2 (22U) Rack Cabinet Pallet AF021A
10622 G2 (22U) Rack Cabinet Shock AF022A
10642 G2 (42U) Rack Cabinet 1200mm Deep - Shock Pallet AF034A
10642 G2 (42U) Rack Cabinet 1200mm Deep - Pallet AF038A
10842 G2 (42U) Rack Cabinet Pallet AF041A
10842 G2 (42U) Rack Cabinet Shock AF042A
10647 G2 (47U) Rack Cabinet - Pallet AF031A
10647 G2 (47U) Rack Cabinet 1200mm Deep - Shock Pallet AF044A
10647 G2 (47U) Rack Cabinet 1200mm Deep - Pallet AF045A
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.html
(Worldwide)
NOTE: For additional information regarding Rack Cabinets, please see the following
URL: http://www.hp.com/go/rackandpower.

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 9

QuickSpecs HP BladeSystem Matrix
Ordering BladeSystem Matrix

Step 2: Select Required HP BladeSystem Matrix Starter Kit (Choose one of the following from
each list unless otherwise noted)
HP BladeSystem Matrix NOTE: Starter Kit default components means HP ordering systems will default these
Starter Kit selections when any unique HP BladeSystem Matrix part number is entered. The
(Hardware Components) default selections can be changed to meet customer needs.
NOTE: The Starter Kit does not include a central management server or CMS (see
BladeSystem c-Class server blades section below for CMS server).
HP BladeSystem Matrix Starter Kit (Hardware Components) 535888-B21
HP BladeSystem Matrix Starter Kit (Hardware Components) includes:

HP BladeSystem c7000 enclosure, single-phase, single-phase with 6 power

supplies, 10 fans
HP BladeSystem c7000 Onboard Administrator with KVM option, redundant
pair
HP Virtual Connect Flex-10 10Gb Ethernet modules, redundant pair
NOTE: No transceivers/SFPs included so that you can choose these options -
need to add to order. See options for this immediately below.
HP Virtual Connect 8Gb 24-Port FC Module for BladeSystem c-Class,
redundant pair
NOTE: Two [2] Fibre Channel SFP+ transceivers included with each module;
therefore, 4 total transceivers per redundant pair.
BladeSystem Matrix documentation CD
BladeSystem Matrix label attached to 10000 series rack door handle
NOTE: Following are the VC Flex-10 10Gb Ethernet module transceiver/SFP options.
HP BladeSystem 10Gb SR SFP+ 455883-B21
HP BladeSystem 10Gb LR SFP+ 455886-B21
HP BladeSystem 10Gb LRM SFP+ 455889-B21
HP BladeSystem 1Gb SX SFP Opt Kit 453151-B21
HP BladeSystem 1Gb RJ-45 SFP Opt Kit 453154-B21
HP BladeSystem Matrix HP BladeSystem Matrix Starter Kit - HP Insight software TC637A
Starter Kit NOTE: One (1) entitlement order number is provided. Includes the HP Insight
(Software Licenses and software DVD media kit.
media) NOTE: If the ordering system default of 3 years Technical Support and Update Service
is rejected or not selected, the basic 1 year Technical Support and Update Service will
apply.
HP BladeSystem Matrix HP BladeSystem Matrix Starter Kit - Implementation Service, Fixed UK831E
Starter Kit
(Implementation Service) HP BladeSystem Matrix Starter Kit - Implementation Service, Flexible HA115A1-5NL
BladeSystem c-Class Central management server (CMS), recommended default SKU - please see all 570775-B22
server blades NOTES below
(Central Management HP ProLiant BL460c G6
Server and Target Servers) NOTE: This is the recommended default SKU for the Matrix central management
server (CMS), to host the management software. It may be substituted with another
server or blade configured per desired needs per notes below and per CMS sizing,
scalability, and redundancy preferences.

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 10

QuickSpecs HP BladeSystem Matrix
Ordering BladeSystem Matrix
HP ProLiant BL460c G6 CMS server blade is configured as follows:

Dual processors - Intel® Xeon® Processor E5540 (2.53 GHz, 8MB L3 Cache,
80W, DDR3-1066, HT, Turbo 1/1/2/2)
32 GB (4 x 8GB) 2Rx4 PC3-10600R-9 Kit Registered DIMMs
HP Smart Array P410i Controller (RAID 0/1)
512 MB Cache Module
2x HP 146GB 3G SAS 10K SFF DP HDDs
QLogic QMH2562 8Gb FC HBA for HP BladeSystem c-Class

NOTE: Larger environments may warrant having multiple CMS servers for these
reasons: scalability, high availability of the management server and data, and
separation of database or management components for performance or security
access reasons. For high availability of the CMS, please refer to these white papers:
http://h10018.www1.hp.com/wwsolutions/misc/hpsim-helpfiles/hpsim-largeEnvmnt-
53.pdf
http://h10018.www1.hp.com/wwsolutions/misc/hpsim-
helpfiles/deploying_MSCSclusters.pdf

NOTE: If the recommended HP ProLiant BL460c G6 configuration above is not

purchased, the customer agrees to supply or purchase other HP ProLiant rack-mount
server(s) or HP ProLiant server blade(s) that meet the requirements. See also the CMS
requirements in this document for more information: http://docs.hp.com/en/T8671-
90069/T8671-90069.pdf.

NOTE: The HP BladeSystem c7000 Enclosure holds up to 16 half-height blades.

Server blanks will be shipped in all empty bays. If the HP ProLiant BL460c
recommended configuration above is purchased, it will take up one of the 16 half-
height bays, leaving 15 remaining half-height bays for managed, target blades.
Target server blades

NOTE: It is highly recommended that at least four (4) additional HP ProLiant c-Class
blades be ordered with each Starter Kit, since the Onsite Implementation Service
includes provisioning of up to four (2) HP ProLiant blades, two of which are directly
provisioned as physical servers and two of which are virtual machine hosts. See
separate section on "Onsite Implementation Service" for details. All shipping HP
ProLiant c-Class blades are supported except the HP ProLiant BL2x220c server blades.
NOTE: For server blade information, please visit:
http://h18000.www1.hp.com/products/quickspecs/division/12534.html
NOTE: HP ProLiant server blades should be configured to connect via the Virtual
Connect modules included in the BladeSystem Matrix kits, - i.e. they should have a
Fibre Channel Host Bus Adapter (HBA) mezzanine card installed.
HP Integrity Servers
NOTE: HP Integrity BL860c and HP Integrity BL870c c-Class blades are supported
when configured with Integrity software products. For additional server blade
information please visit:
http://h18004.www1.hp.com/products/quickspecs/Division/Division.html#12391.
NOTE: The management software licenses packaged with HP BladeSystem Matrix
provide licensing to manage HP ProLiant c-Class server blades only, except for Virtual
Connect Enterprise Manager software (VCEM) as this is licensed to the actual
BladeSystem c7000 enclosure. HP Integrity c-Class server blades require separate

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 11

QuickSpecs HP BladeSystem Matrix
Ordering BladeSystem Matrix
licensing. For HP-UX users, we recommended HP-UX 11i v3 Virtual Server OE (VSE-
OE) or HP-UX 11i v3 Data Center OE (DC-OE) (see: www.hp.com/go/hpux and see
also the Integrity for Matrix ordering information at www.hp.com/go/matrix)
HP Interconnect Options The Virtual Connect interconnect modules that are built in to the Starter and
Expansion kits are not removable. Additional supported interconnected options may
be added to the remaining available interconnect bays (bays 5/6 and 7/8). For
supported BladeSystem Matrix interconnect options, see the Compatibility chart at:
http://www.hp.com/go/matrixcompatibility.
For QuickSpecs for BladeSystem c-Class interconnect options see:
http://h18000.www1.hp.com/products/quickspecs/12524_div/12524_div.html

Step 3: Choose Additional Recommended Options

HP StorageWorks NOTE: Recommended storage target for Matrix; may be substituted. See note below.
EVA4400 (factory HP StorageWorks 4400 Enterprise Virtual Array Starter Kit 10K, Factory integrated AJ669B
integrated) NOTE: This is the default selection for hosting boot and data LUNs for the
BladeSystem Matrix environment.
HP EVA4400 SAN Starter Kit 450GB 10K Factory integrated includes:

EVA4400 Dual Controller array with embedded NPIV-supported 8Gb/s

switches
M6412 12-bay HDD enclosure
Eight 450GB 10K RPM disk drives
Four Emulex 8Gb/s PCI-E HBAs - included to also connect up to four stand-
alone servers to this EVA4400
Command View EVA V9.0 (or later) Media Kit and four 1TB Licenses to Use
SmartStart for EVA Storage v3.0
XCS 9.0 Firmware (or later)

NOTE: Please add fibre channel cables to the order as needed.

NOTE: Includes HP Global Limited Warranty and Technical Support, which includes 3
years 9x5 hardware support, with next business day (NBD) response. HDDs carry a 3
year, parts only warranty.
NOTE: Order the HP StorageWorks 4400 Enterprise Virtual Array Starter Kit (AJ699B
with Factory Express services: HA839A1 and HA865A1), or order or supply another
HP StorageWorks or third-party Fibre Channel SAN array certified for HP BladeSystem
c-Class servers (see: http://h18004.www1.hp.com/products/blades/components/c-
class-sans.html). If a SAN other than the default StorageWorks EVA4400 package is
used, HP onsite implementation service team will confirm specific requirements
regarding LUN zoning, etc. prior to implementation.
NOTE: HP Factory Express services are added if the StorageWorks EVA4400 SAN is
purchased with the BladeSystem Matrix Starter Kit.
HP Factory Express Server System Custom Service HA839A1
NOTE: Required Selection with AJ699B.
HP Rack Signal Cable Interconnect Service HA865A1
NOTE: Required Selection with AJ699B.
NOTE: The two Factory Express options (P/Ns HA839A1 and HA865A1) provide
customer-defined LUN setup (enabling creation of switch zones and boot from SAN)
and cabling of EVA4400, respectively.
VMware vSphere NOTE: Buy one per BladeSystem Matrix Starter/Expansion kit (supports up to 32

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 12

QuickSpecs HP BladeSystem Matrix
Ordering BladeSystem Matrix
Enterprise Plus licenses processor sockets).
for BladeSystem Matrix VMware vSphere Enterprise Plus, 32 processor socket licenses, 3yr 24x7, no media TC290A
VMware vSphere Enterprise Plus, 32 processor socket licenses, 1yr 24x7, no media TC289A
VMware vSphere Installation & Startup Enterprise Service, Flexible HA124A1#5NS
VMware vSphere Installation & Startup Enterprise Service, Fixed UK837E
VMware vCenter Server HP VMware vCenter Server 4.0 Standard for vSphere 571780-B21
Standard for vSphere NOTE: 4.0 here refers to vSphere, not ESX 4.0. Reference the Matrix compatibility
chart at: http://www.hp.com/go/matrixcompatibility for the latest supported ESX
versions.
NOTE: vCenter is licensed per instance (one needed per management domain).
NOTE: This does not include VMware vCenter for vSphere implementation services,
which may be purchased separately.
VMware vSphere HP VMware vSphere 4.0 Enterprise Plus, 1 (one) processor socket license, 1yr 24x7, 571774-B21
Enterprise Plus individual no media
licenses, per processor NOTE: 4.0 here refers to vSphere, not ESX 4.0. Reference the Matrix compatibility
socket chart at: http://www.hp.com/go/matrixcompatibility for the latest supported ESX
versions.
NOTE: This 4.0 license can be used with prior ESX versions, for example, ESX 3.5.
NOTE: Includes technical support and updates for 1 year. For more information, see:
http://h18006.www1.hp.com/products/servers/software/vmware/index.html
NOTE: One instance of VMware vCenter Server (see below) is required to enable
vSphere features such as VMware VMotion, VMware Distributed Resource Scheduler,
and more.
Microsoft Windows Server Windows Server 2008 Standard Edition OS Not Pre-Installed, FIO (includes 1 Hyper- 468721-B21
2008 with Hyper-V V license)
licenses Windows Server 2008 Enterprise Edition OS Not Pre-Installed, FIO (includes 4 Hyper- 468723-B21
V licenses)

Step 4: Choose Additional Options for Factory Integration

NOTE: Additional supported options may be added to the Starter Kit as desired.
NOTE: For additional options, please refer to the "Additional Options" section below. For additional options, including server blade
enclosures interconnect options and power subsystem options; please see the Core Options and Additional sections below; or the
following QuickSpecs:
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
and HP BladeSystem c-Class Interconnect Components QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12524_div/12524_div.html
HP BladeSystem Matrix HP BladeSystem Matrix Expansion Kit 507021-B21
Expansion Kit Includes:

HP BladeSystem c7000 enclosure, single-phase, single-phase with 6 power

supplies, 10 fans
HP BladeSystem c7000 Onboard Administrator with KVM option, redundant
pair
HP Virtual Connect Flex-10 10Gb Ethernet modules, redundant pair
NOTE: No transceivers/SFPs included so that you can choose these options -
need to add to order. See options for this in Note immediately below.
HP Virtual Connect 8Gb 24-Port FC Module for BladeSystem c-Class,

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 13

QuickSpecs HP BladeSystem Matrix
Ordering BladeSystem Matrix
redundant pair
NOTE: Two [2] Fibre Channel SFP+ transceivers included with each module;
therefore, 4 total transceivers per redundant pair.
BladeSystem Matrix documentation CD
BladeSystem Matrix label for attachment to a 10000 series rack door handle
All necessary Insight software management software licenses

NOTE: Add additional Expansion Kits as your BladeSystem Matrix environments

requires or on an as-needed basis.
NOTE: Expansion Kits purchased must be co-located with the Starter Kit(s) to which
they are connecting to.
NOTE: Following are the VC Flex-10 10Gb Ethernet module transceiver/SFP options.
HP BladeSystem 10Gb SR SFP+ 455883-B21
HP BladeSystem 10Gb LR SFP+ 455886-B21
HP BladeSystem 10Gb LRM SFP+ 455889-B21
HP BladeSystem 1Gb SX SFP Opt Kit 453151-B21
HP BladeSystem 1Gb RJ-45 SFP Opt Kit 453154-B21
BladeSystem c-Class NOTE: For server blade information, please visit:
server blades http://h18000.www1.hp.com/products/quickspecs/division/12534.html
NOTE: HP ProLiant server blades should be configured to connect via the Virtual
Connect modules included in the BladeSystem Matrix kits, - i.e. they should have a
Fibre Channel Host Bus Adapter (HBA) mezzanine card installed.
NOTE: The HP BladeSystem c7000 Enclosure holds up to 16 half-height blades.
Server blanks will be shipped in all empty bays.
HP Integrity Servers
NOTE: HP Integrity BL860c and HP Integrity BL870c c-Class blades are supported
when configured with Integrity software products. For additional server blade
information please visit:
http://h18004.www1.hp.com/products/quickspecs/Division/Division.html#12391.
NOTE: The management software licenses packaged with HP BladeSystem Matrix
provide licensing to manage Integrity c-Class server blades only, except for Virtual
Connect Enterprise Manager software (VCEM) as this is licensed to the actual
BladeSystem c7000 enclosure. HP ProLiant c-Class server blades require separate
licensing. For HP-UX users, we highly recommended purchasing HP-UX 11i v3 Virtual
Server OE (VSE-OE) or HP-UX 11i v3 Data Center OE (DC-OE) (see:
www.hp.com/go/hpux and see also the Integrity for Matrix ordering information at
www.hp.com/go/matrix)
HP Interconnect Options Additional supported SAN and Ethernet options may be added to the remaining
available interconnect bays (bays 5/6 and 7/8). For supported BladeSystem Matrix
interconnect options, see the Compatibility chart at: http://www.hp.com/go/matrix.
For QuickSpecs for BladeSystem c-Class interconnect options see:
http://h18000.www1.hp.com/products/quickspecs/12524_div/12524_div.html
Support Plus 24 options NOTE: 3-year Support Plus 24 for the entire BladeSystem Matrix Starter Kit hardware
for BladeSystem Matrix and software (default selection). This Support Plus 24 raises the support levels of all
Starter Kit the Matrix components uniformly up to 3 years for easier tracking of warranty support.
3 year 24x7 4hr BladeSystem Matrix Starter Hardware Support, Fixed UE479E
4 year 24x7 4hr BladeSystem Matrix Starter Hardware Support, Fixed UE483E
5 year 24x7 4hr BladeSystem Matrix Starter Hardware Support, Fixed UE487E

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 14

QuickSpecs HP BladeSystem Matrix
Ordering BladeSystem Matrix
3 year 24x7 4hr BladeSystem Matrix Starter Hardware Support, Flexible HA104A3#7FX
4 year 24x7 4hr BladeSystem Matrix Starter Hardware Support, Flexible HA104A4#7FX
5 year 24x7 4hr BladeSystem Matrix Starter Hardware Support, Flexible HA104A5#7FX
Support Plus 24 - 3 year 24x7 4hr BladeSystem Matrix Hardware Support, Flexible HA110A3#7FX
Support Plus 24 - 4 year 24x7 4hr BladeSystem Matrix Hardware Support, Flexible HA110A4#7FX
Support Plus 24 - 5 year 24x7 4hr BladeSystem Matrix Hardware Support, Flexible HA110A5#7FX
Proactive 24 - 3 year 24x7 4hr BladeSystem Matrix Hardware Support, Flexible HA111A3#7FX
Proactive 24 - 4 year 24x7 4hr BladeSystem Matrix Hardware Support, Flexible HA111A4#7FX
Proactive 24 - 5 year 24x7 4hr BladeSystem Matrix Hardware Support, Flexible HA111A5#7FX
Critical Service - 3 year 24x7 4hr BladeSystem Matrix Hardware Support, Flexible HA112A3#7FX
Critical Service - 4 year 24x7 4hr BladeSystem Matrix Hardware Support, Flexible HA112A4#7FX
Critical Service - 5 year 24x7 4hr BladeSystem Matrix Hardware Support, Flexible HA112A5#7FX
3 year 24x7 BL Matrix Software Support, Fixed UM862E
4 year 24x7 BL Matrix Software Support, Fixed UM863E
5 year 24x7 BL Matrix Software Support, Fixed UM864E
3 year 24x7 BL Matrix Software Support, Flexible HA107A3#9K2
4 year 24x7 BL Matrix Software Support, Flexible HA107A4#9K2
5 year 24x7 BL Matrix Software Support, Flexible HA107A5#9K2
Support Plus 24 - 3 year Support Plus 24 BLc Matrix Software Support, Flexible HA110A3#9K2
Support Plus 24 - 4 year Support Plus 24 BLc Matrix Software Support, Flexible HA110A4#9K2
Support Plus 24 - 5 year Support Plus 24 BLc Matrix Software Support, Flexible HA110A5#9K2
Proactive 24 - 3 year Support Plus 24 BLc Matrix Software Support, Flexible HA111A3#9K2
Proactive 24 - 4 year Support Plus 24 BLc Matrix Software Support, Flexible HA111A4#9K2
Proactive 24 - 5 year Support Plus 24 BLc Matrix Software Support, Flexible HA111A5#9K2
Critical Service - 3 year Support Plus 24 BLc Matrix Software Support, Flexible HA112A3#9K2
Critical Service - 4 year Support Plus 24 BLc Matrix Software Support, Flexible HA112A4#9K2
Critical Service - 5 year Support Plus 24 BLc Matrix Software Support, Flexible HA112A5#9K2

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 15

QuickSpecs HP BladeSystem Matrix
Ordering BladeSystem Matrix
Configuration Information Factory Integrated Models - HP BladeSystem Matrix - Expansion Kit
Step 1: Select Required HP BladeSystem Matrix Expansion Kit (Choose one of the following
from each list unless otherwise noted)
Expansion Kit NOTE: Add HP server blades and other supported options to the Expansion Kit as
desired. Depending on quantity of Expansion Kits purchased, additional racks, storage
arrays, and other options may also be warranted.
NOTE: Expansion Kits purchased must be co-located with the Starter Kit(s) to which
they are connecting to.
NOTE: For HP BladeSystem Matrix compatibility chart:
http://www.hp.com/go/matrixcompatibility for details on supported options, operating
systems, etc.
HP BladeSystem Matrix Expansion Kit 507021-B21
Expansion Kit includes:

HP BladeSystem c7000 enclosure, single-phase with 6 power supplies, 10 fans

HP BladeSystem c7000 Onboard Administrator with KVM option, redundant
pair
HP Virtual Connect Flex-10 10Gb Ethernet module for the BladeSystem c-
Class, redundant pair
HP 8-Gb Virtual Connect Fibre Channel module for BladeSystem c-Class,
redundant pair
Factory services (firmware verification and default racking and cabling), if
ordered CTO
BladeSystem Matrix documentation CD
BladeSystem Matrix label for attachment to a 10000 series rack door handle
HP BladeSystem Matrix - HP Insight software licenses for 1 enclosure / 16-
server with 3 years 24x7 Technical Support and Update Service:
Software licenses for the Infrastructure Operating Environment (Insight Software)

NOTE: If the ordering system default of 3 years Technical Support and Update Service
is rejected or not selected, or if the Expansion Kit is purchased BTO, the basic 1 year
Technical Support and Update Service will apply.

Step 2: Select Recommended options for HP BladeSystem Expansion Kit (Choose one of the
following from each list unless otherwise noted)
BladeSystem c-Class Target server blades
target server blades NOTE: All shipping HP ProLiant c-Class blades are supported except the HP ProLiant
BL2x220c server blades and workstation blades.
NOTE: For server blade information, please visit:
http://h18000.www1.hp.com/products/quickspecs/division/12534.html
NOTE: HP ProLiant server blades should be configured to benefit from the Virtual
Connect modules included in the Starter Kit, and necessary for full BladeSystem Matrix
functionality - i.e. they should have a FC HBA mezzanine card installed.
NOTE: The HP BladeSystem c7000 Enclosure holds up to 16 half-height blades.
Server blanks will be shipped in all empty bays.
HP Integrity Servers
NOTE: HP Integrity BL860c and HP Integrity BL870c c-Class blades are supported

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 16

QuickSpecs HP BladeSystem Matrix
Ordering BladeSystem Matrix
when configured with Integrity software products. For additional server blade
information please visit:
http://h18004.www1.hp.com/products/quickspecs/Division/Division.html#12391.
NOTE: The management software licenses packaged with HP BladeSystem Matrix
provide licensing to manage Integrity c-Class server blades only, except for Virtual
Connect Enterprise Manager software (VCEM) as this is licensed to the actual
BladeSystem c7000 enclosure. HP ProLiant c-Class server blades require separate
licensing. For HP-UX users, we highly recommended purchasing HP-UX 11i v3 Virtual
Server OE (VSE-OE) or HP-UX 11i v3 Data Center OE (DC-OE) (see:
www.hp.com/go/hpux and see also the Integrity for Matrix ordering information at
www.hp.com/go/matrix)
Interconnect options Additional supported SAN and Ethernet options may be added to the remaining
available interconnect bays (bays 5/6 and 7/8). For supported BladeSystem Matrix
interconnect options, see the compatibility chart at http://www.hp.com/go/matrix.
For QuickSpecs for c-Class interconnect options see:
http://h18000.www1.hp.com/products/quickspecs/12524_div/12524_div.html
Support Plus 24 options NOTE: 3-, 4-, and 5-year Support Plus 24 Care Pack uplifts are available for the
for the entire BladeSystem entire BladeSystem Matrix Starter Kit hardware and software. Support Plus 24 raises
Matrix Expansion Kit the support levels of all the Matrix components uniformly up to 3-5 years for easier
tracking of warranty support.
3 year Support Plus 24 BLc Matrix Expansion Kit Support, Fixed UM859E
4 year Support Plus 24 BLc Matrix Expansion Kit Support, Fixed UM860E
5 year Support Plus 24 BLc Matrix Expansion Kit Support, Fixed UM861E
3 year Support Plus 24 BLc Matrix Expansion Kit Support, Flexible HA110A3#9K1
4 year Support Plus 24 BLc Matrix Expansion Kit Support, Flexible HA110A4#9K1
5 year Support Plus 24 BLc Matrix Expansion Kit Support, Flexible HA110A5#9K1
Proactive 24 - 3 year Support Plus 24 BLc Matrix Expansion Kit Support, Flexible HA111A3#9K1
Proactive 24 - 4 year Support Plus 24 BLc Matrix Expansion Kit Support, Flexible HA111A4#9K1
Proactive 24 - 5 year Support Plus 24 BLc Matrix Expansion Kit Support, Flexible HA111A5#9K1
Critical Service - 3 year Support Plus 24 BLc Matrix Expansion Kit Support, Flexible HA112A3#9K1
Critical Service - 4 year Support Plus 24 BLc Matrix Expansion Kit Support, Flexible HA112A4#9K1
Critical Service - 5 year Support Plus 24 BLc Matrix Expansion Kit Support, Flexible HA112A5#9K1
24x7 4hr HW Support - 3 year Support Plus 24 BLc Matrix Expansion Kit Support, HA104A3#9K1
Flexible
24x7 4hr HW Support - 4 year Support Plus 24 BLc Matrix Expansion Kit Support, HA104A4#9K1
Flexible
24x7 4hr HW Support - 5 year Support Plus 24 BLc Matrix Expansion Kit Support, HA104A5#9K1
Flexible
24x7 SW Support - 3 year Support Plus 24 BLc Matrix Expansion Kit Support, Flexible HA107A3#9K1
24x7 SW Support - 4 year Support Plus 24 BLc Matrix Expansion Kit Support, Flexible HA107A4#9K1
24x7 SW Support - 4 year Support Plus 24 BLc Matrix Expansion Kit Support, Flexible HA107A5#9K1

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 17

QuickSpecs HP BladeSystem Matrix
Ordering BladeSystem Matrix
Step 3: Choose Additional Factory Integratable Options (one of the following from each list
unless otherwise noted)
VMware vSphere NOTE: Buy one per BladeSystem Matrix Starter/Expansion kit (supports up to 32
Enterprise Plus licenses processor sockets).
for BladeSystem Matrix VMware vSphere Enterprise Plus, 32 processor socket licenses, 3yr 24x7, no media TC290A
VMware vSphere Enterprise Plus, 32 processor socket licenses, 1yr 24x7, no media TC289A
VMware vSphere Installation & Startup Enterprise Service, Flexible HA124A1#5NS
VMware vSphere Installation & Startup Enterprise Service, Fixed UK837E
VMware vCenter Server HP VMware vCenter Server 4.0 Standard for vSphere 571780-B21
Standard for vSphere NOTE: 4.0 here refers to vSphere, not ESX 4.0. Reference the Matrix compatibility
chart at: http://www.hp.com/go/matrixcompatibility for the latest supported ESX
versions.
NOTE: vCenter is licensed per instance (one needed per management domain).
NOTE: This does not include VMware vCenter for vSphere implementation services,
which may be purchased separately.
VMware vSphere HP VMware vSphere 4.0 Enterprise Plus, 1 (one) processor socket license, 1yr 24x7, 571774-B21
Enterprise Plus individual no media
licenses, per processor NOTE: 4.0 here refers to vSphere, not ESX 4.0. Reference the Matrix compatibility
socket chart at: http://www.hp.com/go/matrixcompatibility for the latest supported ESX
versions.
NOTE: This 4.0 license can be used with prior ESX versions, for example, ESX 3.5.
NOTE: Includes technical support and updates for 1 year. For more information, see:
http://h18006.www1.hp.com/products/servers/software/vmware/index.html
NOTE: One instance of VMware vCenter Server (see below) is required to enable
vSphere features such as VMware VMotion, VMware Distributed Resource Scheduler,
and more.
Microsoft Windows Server Windows Server 2008 Standard Edition OS Not Pre-Installed, FIO (includes 1 Hyper- 468721-B21
2008 with Hyper-V V license)
licenses Windows Server 2008 Enterprise Edition OS Not Pre-Installed, FIO (includes 4 Hyper- 468723-B21
V licenses)

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 18

QuickSpecs HP BladeSystem Matrix
Ordering BladeSystem Matrix
Step 4: Choose Additional Options for Factory Integration
Rack power distribution for BladeSystem Matrix enclosures
NOTE: A pair of PDUs must be ordered for AC Feed redundancy.
Power Distribution Units HP Monitored Power Distribution Unit: Half Rack Version
HP 17.3-kVA S348 Monitored PDU - single input, 3Ø, 48A (NA/JPN) AF916A
HP 14.4-kVA S340 Monitored PDU - single input 3Ø, 40A (NA/JPN) AF536A
HP 22-kVA S332 Monitored PDU - single input 3Ø, 32A (INTL) AF917A
Modular PDUs 1U/0U (Up to 28 outlets)
NOTE: 1U/0U mounting brackets shipped with the unit (optimized for 10000 G2 and
9000 series racks).
HP 17.3-kVA Modular PDU, 48A 3Ø, Core Only (NA/JPN) AF511A
HP 14.4-kVA Modular PDU, 40A 3Ø, Core Only (NA/JPN) AF519A
HP 22-kVA Modular PDU, 32A 3Ø, Core Only (Intl) AF518A
HP 8.6-kVA Modular PDU 24A 3Ø Core Only (NA/JPN) AF512A
HP 11-kVA Modular PDU 16A 3Ø Core Only (Intl) AF513A
HP 8.3k-VA Modular PDU 40A Core Only (NA/JPN) 252663-D75
HP 9.2-kVA Modular PDU 40A Core Only (Intl) 252663-B34
HP 7.3-kVA Modular PDU 32A Core Only (Intl) 252663-B33
HP 4.9-kVA Modular PDU 24A Core Only (NA/JPN) 252663-D74
NOTE: The Core Only Modular Power Distribution Unit Kits excludes the extension
bars as they are not required with the HP BladeSystem.
HP Two C-13 PDU Extension Bars AF500A
NOTE: Each extension bar has a C19 input and 7 C13 receptacles. The option is
ideal for model S348, and, model S332, which both have only C19 outlets (12) and
for all Core Only Modular PDUs.
Select optional Power Cords for Single Phase Model (country specific power cords are listed under options)
NOTE: Default power cord is a 6ft IEC C19 - C20 cord
PDU cords HP 16A IEC320-C19 to C20 1.2m/4ft PDU cord, Grey AF575A
(HP C19 to C20) HP 16A IEC320-C19 to C20 2m /6ft PDU cord, Grey AF574A
HP 16A IEC320-C19 to C20 2.5m/8ft PDU cord, Black 295633-B22
HP 16A IEC320-C19 to C20 4.5m/15ft PDU cord, Black E7804A

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 19

QuickSpecs HP BladeSystem Matrix
Additional Options

HP PCI expansion blades PCI Expansion Blade 448018-B21

NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12753_div/12753_div.html
HP PCI Express Mezzanine pass-thru card for HP BladeSystem 431643-B21

Power cords HP C19 - C20 Jumper Cords

HP 16A IEC320-C19 to C20 1.2m/4ft, PDU cord, Flint Gray AF575A
HP 16A IEC320-C19 to C20 2m/6ft, PDU cord, Flint Gray AF574A
HP 16A IEC320--C19 to C20 2.5m/8ft PDU cord, Black 295633-B22
HP 16A IEC320-C19 to C20 4.5m/15ft, PDU cord, Black E7804A
HP HV Power Cords 200 - 240V AC
HP 16A 250V L6-30P/IEC320-C19 4.5m/15ft, NA E7805A
HP 16A 250V NEMA L 6-20P/IEC320-C19 3.6m/12ft, NA AF593A
HP 16A 250V NBR 14136/ IEC320-C19 2.5m/8ft, Brazil AF592A
HP 16A 250V IRAM 2073/IEC320-C19 2.5m/8ft, AR AF578A
HP 13A 250V BS-1363/IEC320-C19 3.6m /12ft, UK/Sing/HK 359615-031
HP 16A 250V CEE7-VII/IEC320- C19 3.6m/12ft, EU AF576A
HP 15A 250V AS3112-3/IEC320-C19 3.6m/12ft, AU/NZ AF577A
HP 16A 250V SABS 164/IEC320-C-9 3.6m /12ft, S.AFRICA AF579A
HP 16A 250V CEI23-50/IEC320-C19 3.6m /12ft, ITALY/CHILE AF580A
HP 16A 250V IEC309/IEC320-C19 3.6m/12ft, Denmark/Switzerland AF581A
HP 16A 250V IS 1293/IEC320-C19 2.5m /8ft, INDIA AF582A
HP 16A 250V SI-32/IEC320-C19 2.5m/8ft, ISRAEL AF583A
HP 16A 250V GB1002/IEC320-C19 2.5m/8 ft, CHINA AF584A
HP 16A 250V CNS690/IEC320-C19 2.5m/8 ft, TAWAIN AF585A
HP 16A 250V stripped end/IEC320-C19 4.5m /15ft, WW E7806A
HP 16A 250V SI-32/IEC320-C19 2.5m/8ft, ISRAEL AF583A

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 20

QuickSpecs HP BladeSystem Matrix
Additional Options
Uninterruptible Power HP Rack Mounted R5500 UPS (single-phase)
Systems HP R5500 VA 3U UPS, INTL AF416A
HP R5500 VA 3U UPS, NA/JPN AF426A
NOTE: For more information on the R5500 please consult the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11871_div/11871_div.html
HP Rack Mounted R8000 UPS (3-phase UPS)
HP R8000/3 Uninterruptible Power System 6U NA AF431A
HP R8000/3 Uninterruptible Power System 6U INTL AF432A
HP Rack Mounted R12000 UPS (3-phase UPS)
HP R12000/3 Uninterruptible Power System 6U NA AF429A
HP R12000/3 Uninterruptible Power System 6U INTL AF430A
NOTE: For more information on the HP 3-Phase UPS products please consult the
QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12857_div/12857_div.html

HP Rack Series HP 10000 G2 Series racks (Graphite Metallic)

10642 G2 (42U) Rack Cabinet - Pallet AF001A
10642 G2 (42U) Rack Cabinet - Shock Pallet AF002A
10642 G2 (42U) Rack Cabinet - Crated AF003A
10642 G2 (42U) Rack Shock Pallet- for field racking (NA only) AF007A
10636 G2 (36U) Rack Cabinet - Shock Pallet AF011A
10636 G2 (36U) Rack Cabinet - Crated AF012A
10636 G2 (36U) Rack Cabinet, with Extension - Shock Pallet AF013A
10636 G2 (36U) Rack Cabinet, without door - Shock Pallet AF014A
10622 G2 (22U) Rack Cabinet Pallet AF021A
10622 G2 (22U) Rack Cabinet Shock AF022A
10642 G2 (42U) Rack Cabinet 1200mm Deep - Shock Pallet AF034A
10642 G2 (42U) Rack Cabinet 1200mm Deep - Pallet AF038A
10842 G2 (42U) Rack Cabinet Pallet AF041A
10842 G2 (42U) Rack Cabinet Shock AF042A
10647 G2 (47U) Rack Cabinet - Pallet AF031A
10647 G2 (47U) Rack Cabinet 1200mm Deep - Shock Pallet AF044A
10647 G2 (47U) Rack Cabinet 1200mm Deep - Pallet AF045A
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.html
(Worldwide)
NOTE: For additional information regarding Rack Cabinets, please see the following
URL: http://www.hp.com/go/rackandpower.

HP Rack Options Keyboards and Monitors

TFT7600 Rackmount Keyboard Monitor US AG052A

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 21

QuickSpecs HP BladeSystem Matrix
Additional Options
TFT7600 Rackmount Keyboard Monitor UK AG053A
TFT7600 Rackmount Keyboard Monitor FR AG055A
TFT7600 Rackmount Keyboard Monitor SP AG057A
TFT7600 Rackmount Keyboard Monitor DEN AG058A
TFT7600 Rackmount Keyboard Monitor NOR AG059A
TFT7600 Rackmount Keyboard Monitor SWI AG061A
TFT7600 Rackmount Keyboard Monitor BEL AG063A
TFT7600 Rackmount Keyboard Monitor RUS AG065A
TFT7600 Rackmount Keyboard Monitor INTL AG066A
1U Rackmount Keyboard with USB, US AG072A
1U Rackmount Keyboard with USB, UK AG073A
1U Rackmount Keyboard with USB, GR AG074A
1U Rackmount Keyboard with USB, FR AG075A
1U Rackmount Keyboard with USB, ITL AG076A
1U Rackmount Keyboard with USB, SP AG077A
1U Rackmount Keyboard with USB, DEN AG078A
1U Rackmount Keyboard with USB, NOR AG079A
1U Rackmount Keyboard with USB, SE/FI AG080A
1U Rackmount Keyboard with USB, SWI AG081A
1U Rackmount Keyboard with USB, PORT AG082A
1U Rackmount Keyboard with USB, BEL AG083A
1U Rackmount Keyboard with USB, JPN2 AG084A
1U Rackmount Keyboard with USB, RUS AG085A
1U Rackmount Keyboard with USB, INTL AG086A
NOTE: For additional information regarding Rack Options, please see the following
URL: http://www.hp.com/go/rackandpower
HP KVM Switch Options
2x1x16 IP Console Switch with Virtual Media AF601A
4x1x16 IP Console Switch with Virtual Media AF602A
2x16 Server Console Switch with Virtual Media AF600A
PS/2 Virtual Media Interface Adapter, 1 pack AF604A
NOTE: Requires PS/2 and one USB port on server.
BladeSystem c-Class KVM Interface Adapter - 1 pack AF605A
HP Server console switch 0x2x8 AF616A
HP Server console switch 0x2x16 AF617A
PS/2 Interface Adapter, 1-pack 262588-B21
PS/2 Interface Adapter, 8-pack 262587-B21
NOTE: Cat5e cables are required to connect Interface Adapters to Consoles
Switches. Cat52 cables can be found at the following URL:
http://www.hp.com/go/kvm
HP 1x4 Console Switch AF611A
HP PS2 Server Console Cable, 6 foot, 2-Pack AF612A

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 22

QuickSpecs HP BladeSystem Matrix
Additional Options
HP USB Server Console Cable, 6 foot, 2-Pack AF613A
NOTE: required for supporting USB peripherals.
NOTE: For additional information regarding KVM switches, Serial Console servers,
rack mount monitors, keyboards and all related options please see the following URL:
http://www.hp.com/go/kvm
HP Serial Console Server Options
HP 16 Port Serial Console Server (worldwide) AF101A
HP 48 Port Serial Console Server (worldwide) AF102A
Serial Adapter, RJ45-DB9 DCE Female, 1 Pack AF103A
Serial Adapter, RJ45-DB9 DCE Female, 8 Pack AF110A
NOTE: Cat5e cables are required to connect Serial Adapters to Serial Console
Servers. Additional Serial Adapters and Cat5e cables can be found at the following
URL: http://www.hp.com/go/kvm.
NOTE: For additional information regarding KVM switches, Serial Console servers,
rack mount monitors, keyboards and all related options please see the following URL:
http://www.hp.com/go/kvm.
Rack options for HP 10000 G2 Series racks
HP 10642 G2 Front Door ALL AF009A
HP 10636 G2 Front Door ALL AF019A
HP 10642 G2 (42U) Side Panels (set of two) (Graphite Metallic) AF054A
HP 10636 G2 (36U) Side Panels (set of two) (Graphite Metallic) AF056A
HP 10636 G2 Rear Extension Kit AF060A
600mm G2 Stabilizer Option Kit (Graphite) AF062A
600mm G2, Heavy Duty Stabilizer Option Kit (Graphite) AF064A
800mm G2, Heavy Duty Stabilizer Option Kit (Graphite) AF068A
NOTE: Supports 10000 G2 Series only.
HP 10000 G2 Rack Grounding Kit AF074A
600W 10K G2 Rack Tie Down AF076A
NOTE: For additional information regarding Rack Options, please see the following
URL: http://www.hp.com/go/rackandpower.
HP Airflow Optimization AF090A
HP 10000 Series Rack Airflow Optimization Kit
NOTE: The Airflow Optimization kit is designed to prevent hot and cold air from
mixing thus optimizing the temperature at which the chilled air enters the racked
servers.
NOTE: When configuring racks through Factory Express, a Rack Optimization kit will
automatically ship with the rack. This kit is recommended for all other rack
configurations also.

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 23

QuickSpecs HP BladeSystem Matrix
Additional Options
Tape Storage The following options are supported in an Enterprise Backup Solution (EBS)
environment with the HP BladeSystem c-Class enclosure. Please visit:
http://www.hp.com/go/ebs for complete compatibility details.
HP StorageWorks MSL2024 Tape Library
HP StorageWorks MSL2024 1 LTO-4 Ultrium 1840 SCSI Drive Library AJ033A
HP StorageWorks MSL2024 1 LTO-4 Ultrium 1840 4GB FC Library AJ034A
HP StorageWorks MSL2024 1 LTO-3 Ultrium 960 SCSI Drive Library AG115A
HP StorageWorks MSL2024 1 LTO-3 Ultrium 960 4GB FC Library AG326B
HP StorageWorks MSL2024 1 LTO-3 Ultrium 920 SCSI Drive Library AH169A
HP StorageWorks MSL2024 2 LTO-3 Ultrium 920 SCSI Drive Library AH170A
HP StorageWorks MSL2024 1 LTO-2 Ultrium 448 SCSI Drive Library AG116A
HP StorageWorks MSL2024 2 LTO-2 Ultrium 448 SCSI Drive Library AG117A
HP StorageWorks MSL4048 Tape Library
HP StorageWorks MSL4048 1 LTO-4 Ultrium 1840 SCSI Drive Library AJ035A
HP StorageWorks MSL4048 2 LTO-4 Ultrium 1840 SCSI Drive Library AJ037A
HP StorageWorks MSL4048 1 LTO-4 Ultrium 1840 4GB FC Library AJ036A
HP StorageWorks MSL4048 2 LTO-4 Ultrium 1840 4GB FC Library AJ038A
HP StorageWorks MSL4048 1 LTO-3 Ultrium 920 SCSI Tape Library AH171A
HP StorageWorks MSL4048 2 LTO-3 Ultrium 920 SCSI Tape Library AH172A
HP StorageWorks MSL4048 1 LTO-3 Ultrium 960 SCSI Drive Library AG322A
HP StorageWorks MSL4048 1 LTO-3 Ultrium 960 4GB FC Library AG324B
HP StorageWorks MSL4048 2 LTO-3 Ultrium 960 SCSI Drive Library AG323A
HP StorageWorks MSL4048 2 LTO-3 Ultrium 960 4GB FC Library AG325B
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information or to create a complete solution; reference current compatibility
information at: http://www.hp.com/go/ebs.
HP StorageWorks Virtual Library Systems
HP StorageWorks 12000 Virtual Library System Gateway Base Library AH814A
HP StorageWorks 9030 Virtual Library System AG306A
HP StorageWorks 6218 Virtual Library System AH809A
HP StorageWorks 6227 Virtual Library System AH810A
HP StorageWorks 6636 Virtual Library System AH811A
HP StorageWorks 6653 Virtual Library System AH812A
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information or to create a complete solution. Reference current compatibility
information at: http://www.hp.com/go/ebs.

HP Care Pack services NOTE: HP Care Pack services for the BladeSystem c7000 enclosure cover the
enclosure, power supplies and fans. HP qualified rack options are covered by these
services when installed within the same rack. HP supported BladeSystem c-Class
enclosure devices including pass thru, Ethernet interconnect and virtual connect
modules are also covered by the BladeSystem c7000 enclosure Care Pack services.

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 24

QuickSpecs HP BladeSystem Matrix
Additional Options
NOTE: SAN/Fabric switches for the HP BladeSystem c-Class enclosure are not
covered under the BladeSystem c7000 enclosure Care Packs, SAN/Fabric switches
carry separate Care Packs. SAN/Fabric Switch Care Pack service level support should
always be uplifted to match existing storage or server service level.
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years, Electronic UE477E
NOTE: Uplifts the Ethernet devices to the same level of service as the c-class
enclosure.
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic UE478E
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic UE479E
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years, UE480E
Electronic
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years, Electronic UE436E
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic UE437E
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic UE438E
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years, UE439E
Electronic
Hardware Installation, Electronic U5988E
Software Operating Environment Care Packs
1 Year Microsoft operating environment software support 24x7 - 10 incidents U9269E
1 Year Red Hat operating system software support 24x7 - 10 incidents U3408E
1 Year SUSE operating system software support 24x7 - 10 incidents U9936E
NOTE: For more information, customer/resellers can contact:
http://www.hp.com/hps/carepack/services/
NOTE: SAN/Fabric switches for the HP BladeSystem c-Class enclosure are not
covered under the BladeSystem c7000 enclosure Care Packs, SAN/Fabric switches
carry separate Care Packs. SAN/Fabric Switch Care Pack service level support should
always be uplifted to match existing storage or server service level.
Hardware Services On-site Service
Next Business Day On-site Service, 5-Day x 9-Hour Coverage, 3 Years, Electronic HA101A3#6Q6
NOTE: Uplifts the Ethernet devices to the same level of service as the c-class
enclosure.
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic HA103A3#6Q6
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic HA104A3#6Q6
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years, HA105A3#6Q6
Electronic
Support Plus
Support Plus Service, 5-Day x 13-Hour Coverage HA109A3#6Q6
Support Plus 24
Support Plus 24 Service HA110A3#6Q6
Proactive 24 Service - Mission Critical proactive environment 24x7 4hr onsite HW HA111A3#6Q6
support

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 25

QuickSpecs HP BladeSystem Matrix
Additional Options
Critical Service - Mission Critical proactive environment 6-Hour Call-to-Repair onsite HA112A3#6Q6
HW support
Hardware Installation, Electronic HA113A1#5D2
Infrastructure Software On-site Service
HP Insight Dynamics Recovery Management Installation & Startup Service, Fixed UK830E
NOTE: Disaster Recovery requires both a Primary Site and Secondary Site, and
supported HP SAN Storage at both sites to have "Continuous Access" implemented
between the SAN.
NOTE: All HP BladeSystem Matrix infrastructure ships with licensed disaster recovery
protection for both physical and virtual servers, in coordination with data replication
provided by StorageWorks EVA Continuous Access software. Disaster recovery
protection can be achieved by implementing a secondary infrastructure at a remote
location, and enabling storage replication between the two sites.
HP Insight Dynamics Recovery Management Installation & Startup Service, Flexible HA124A1#5FX
HP Install c7000 Enclosure and Server Build Service UE494E
NOTE: This is recommended to assist with onsite racking and cabling of BladeSystem
Matrix enclosures into a rack, particularly when BladeSystem Matrix kits are purchased
without a rack.
HP Install c7000 Enclosure and Server Build Service , Flexible HA113A1#5FY
NOTE: This is recommended to assist with onsite racking and cabling of BladeSystem
Matrix enclosures into a rack, particularly when BladeSystem Matrix kits are purchased
without a rack.
HP Additional Technical Assistance HA334A1
NOTE: This service provides the capability to customize tasks and activities including
assistance with design, implementation, migration, and project management.
NOTE: The following HP Education Services (sold in units) are highly recommended
to ensure effective solution usage and knowledge.
HP BladeSystem Virtualization Tools using Insight Dynamics for ProLiant (28 units) HG812S
HP Virtual Connect and Virtual Connect Enterprise Manager (VCEM) HF837S
HP Insight Control: Introduction HE643S
HP Insight Control: Deploying & Updating with Insight Control server deployment HE645S
HP BladeSystem c-Class administration HE646S

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 26

QuickSpecs HP BladeSystem Matrix
Technical Specifications

Half-height server blade bay numbering

1. Device Bay 1 9. Device Bay 9

2. Device Bay 2 10. Device Bay 10
3. Device Bay 3 11. Device Bay 11
4. Device Bay 4 12. Device Bay 12
5. Device Bay 5 13. Device Bay 13
6. Device Bay 6 14. Device Bay 14
7. Device Bay 7 15. Device Bay 15
8. Device Bay 8 16. Device Bay 16
NOTE: Half-height servers should be populated from top and bottom from left to right (looking at the front of the enclosure). So the
first two half-height servers would be placed in bays 1 & 9 the second two half-height servers would be placed in bays 2 & 10 and so
on until the enclosure is full.

Full-height server blade bay numbering

1. Device Bay 1 5. Device Bay 5

2. Device Bay 2 6. Device Bay 6

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 27

QuickSpecs HP BladeSystem Matrix
Technical Specifications
3. Device Bay 3 7. Device Bay 7
4. Device Bay 4 8. Device Bay 8
NOTE: Full-height servers should be populated from left to right.

Mixed Configuration - Full Height and Half-Height Population rules

The BladeSystem c7000 enclosure is divided into 4 zones by the vertical support metalwork. Within each zone a removable divider is
used to support half height devices. To install a full-height blade in any zone this divider must be removed. As a consequence a zone
can only contain either full-height server blades or half-height server blades.
NOTE: Storage blades and tape blades can be installed in the same zone as both full-height and half-height server blades, a
bracket ships with each StorageWorks SB40c tape blade that allows a half-height blade to be mounted on top of the tape blade.
NOTE: The lower tape or storage blade cannot be removed without first removing the upper half-height blade.

HP BladeSystem Dimensions Height 17.4 in (442 mm)

c7000 enclosure Width 17.6 in (447.04 mm)
Depth 32 in (813 mm)
Shipping dimensions Height 29.88 in (759 mm)
Width 23.88 in (607 mm)
Depth 39.88 in (1013 mm)
Single-phase enclosure Unboxed 192 lb (87 Kg)
weight Shipping 235 lb (106.6 Kg)
Three -phase enclosure Unboxed 222 lb (100.7 Kg)
NA/JPN weight Shipping 265 lb (120.2 Kg)
Three-phase enclosure Unboxed 222 lb (100.7 Kg)
international weight Shipping 265 lb (120.2 Kg)
DC input enclosure Unboxed 151 lb (68.5 Kg)
weight Shipping 194 lb (88 Kg)

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 28

QuickSpecs HP BladeSystem Matrix
Technical Specifications
Maximum enclosure Unboxed 450 lb (204 Kg)
weight (approximate) Shipping 493 lb (223.6 Kg)
Temperature range Operating 50° to 95° F (10° to 35° C)
Non-Operating -22° to 140° F (-30° to 60° C)
Relative humidity Operating 10 to 90% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, non-
condensing.
Non-Operating 5 to 95% relative humidity (Rh), 38.7°C
(101.7°F)maximum wet bulb temperature, non-
condensing.
NOTE: Operating temperature has an altitude derating of 1.8° F (1° C) per 1,000 ft (304.8 m). No
direct sunlight. Upper operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating
limit is 30,000 ft (9,144 m) or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a
maximum temperature of 113° F (45° C). Altitude maximum for storage is 70 KPa.

Power Input requirements - Rated input frequency 50 to 60 Hz

single-phase model 2250W PSU Rated input voltage 100 to 120 VAC
200 to 240 VAC
Rated input current 12.3A at 100 - 120
per power supply VAC
13.1 A at 200 VAC
12.6 A at 208 VAC
11.9 A at 220 VAC
Rated input power 2612 VA Max
per power supply
2400W PSU Rated input voltage 200 to 240 VAC
Rated input current 13.9 A at 200 VAC
per power supply 13.3 A at 208 VAC
12.6 A at 220 VAC
Rated input power 2780 VA
per power supply
Power cords Single Phase IEC-320 C19-C20 1.22m (6 ft)
3-Phase NA/JPN 2 x NEMA L15-30p 2.44m (10 ft)
3-Phase International 2 x IEC-309 200/346 V - 240/415 V, 5-Pin, 6h
16A 2.44m (10 ft)
-48V DC Power Terminal lug: 45DG 4AWG 1/4 2H

Two-hole lug
45 degree bend
0.25in. (6.4mm) stud hole size
0.63in. (16mm) hole spacing
Output HP 2250W Hot-Plug 200 - 240 VAC 2250 W
specifications Power Supply 100 - 120 VAC 960 W
(per power supply) HP 2400W High Efficiency 200 - 240 VAC 2400 W
Hot-Plug Power Supply

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 29

QuickSpecs HP BladeSystem Matrix
Technical Specifications
HP 2250W -48V DC Hot- 2250W
Plug Power Supply
Acoustic noise Listed are the declared A-Weighted sound power levels (LWAd) and declared
average bystander position A-Weighted sound pressure levels (LpAm) when
the product is operating in a 23°C ambient environment. Noise emissions
were measured in accordance with ISO 7779 (ECMA 74) and declared in
accordance with ISO 9296 (ECMA 109).
Idle
LWAd 7.5 Bels
LpAm 57 dB
Idle
LWAd 7.5 Bels
LpAm 57 dB

Environmental-friendly End-of-life management Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
products and approach and recycling programs in many geographic areas. For trade-in information, please go to:
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide

treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green. These instructions may
be used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 30

QuickSpecs HP BladeSystem Matrix
Power Specifications

NOTE: To review maximum system power ratings for facilities planning purposes use the Active Answers Power Calculator which is
available via the online tool located at URL: http://www.hp.com/go/bladesystem/powercalculator

© Copyright 2010 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice.

Microsoft and Windows are US registered trademarks of Microsoft Corporation.

Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries.
AMD Opteron™ is a US registered trademark of AMD Corporation.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.

DA - 13297 Worldwide — Version 8 — March 29, 2010 Page 31