Scribd
Upload
138 views3 pages

AP C33W Datasheet

The AP-C33W is a positive-pressure type sensor designed for air or non-corrosive gases, with a rated pressure of 0 to +1.000 MPa and a display resolution of 0.001 MPa. It features an analogue output, NPN control outputs, and operates within a temperature range of 0 to +50 °C. The device has a compact design, weighing approximately 30 g without cable, and includes various accessories for installation.

Uploaded by

freed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
138 views3 pages

AP C33W Datasheet

The AP-C33W is a positive-pressure type sensor designed for air or non-corrosive gases, with a rated pressure of 0 to +1.000 MPa and a display resolution of 0.001 MPa. It features an analogue output, NPN control outputs, and operates within a temperature range of 0 to +50 °C. The device has a compact design, weighing approximately 30 g without cable, and includes various accessories for installation.

Uploaded by

freed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Data Sheet

AP-C33W
Main Unit, Positive-pressure Type, 1 Mpa, NPN

Specifications
Model AP-C33W
Type Positive pressure
Rated pressure 0 to +1.000 MPa
Fluid type Air or non-corrosive gases
Type of pressure Gauge pressure
Display 3 1/2-digit, 2-color, 7-segment LED (Character height: 11 mm), Display cycle: 10
times/s
Operation indicator Red LED x 2 (corresponding to control output 1 and 2)
Display resolution Normal mode: 0.001 MPa, Focus mode: 0.1 kPa
Power consumption Normal 12 V: 720 mW (60 mA) or less, 24 V: 960 mW (40 mA) or less*1
Display temperature characteristic ±1 % of F.S. max.
Hysteresis Variable (Standard: 0.5 % of F.S.)*2
Response time (Chattering prevention function) 2.5, 5, 100, or 500 ms (selectable)
I/O Analogue output 1 to 5 V with load impedance of 1 kΩ max. (or zero-shift input selectable)
Zero-shift input Input time: 2 ms or more. (or analog output selectable)
Control output NPN open collector 100 mA max. (at 40 V or below) with max. residual voltage of
1 V, 2 outputs (NO or NC selectable)
Pressure port Rc (PT) 1/8 180 ° rotation
Rating Power voltage 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less
Power consumption Eco mode 12 V: 480 mW (40 mA) or less, 24 V: 720 mW (30 mA) or less*1
Environmental resist- Pressure resistance 1.5 MPa
ance
Ambient temperature 0 to +50 °C (No freezing)
Relative humidity 35 to 85 % RH (No condensation)
Vibration resistance 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z direc-
tions
Material Front housing: Polysulfone, Rear housing: PBT, Front seat: Polycarbonate, Pres-
sure port: Zinc die-casting
Accessories Power supply cord (2-m with connector), Unit seal
Weight Approx. 30 g (without cable) /Approx. 85 g (with 2-m cable)

*1 Excluding the current for analog output Including the current for the sensor head
*2 A standard of 0.2 % of FS applies while in focus mode.

KEYENCE INTERNATIONAL (BELGIUM) +32 (0) 15 281 222 https://www.keyence.eu 2023/09/14 Page 1 of 3
Data Sheet

Dimensions
* Download CAD file or product manual for larger image/text and more detail.

KEYENCE INTERNATIONAL (BELGIUM) +32 (0) 15 281 222 https://www.keyence.eu 2023/09/14 Page 2 of 3
Data Sheet

I/O Circuit Connection diagram


* Download CAD file or product manual for larger image/text and more detail.

I/O circuit diagram NPN

Zero-shift input circuit

Analogue output circuit

KEYENCE INTERNATIONAL (BELGIUM) +32 (0) 15 281 222 https://www.keyence.eu 2023/09/14 Page 3 of 3

You might also like