0% found this document useful (0 votes)
33 views3 pages

Piccolo ATX2S IoT Min

Uploaded by

rubenssotos84
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
33 views3 pages

Piccolo ATX2S IoT Min

Uploaded by

rubenssotos84
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

KEY FEATURES

Integrated BLE Reader for

PICCOLO ATX2S IoT Wireless RFTags

Optional CAN Support

OVERVIEW Ruggedized IP67 Waterproof


Whether your assets are left at public construction Enclosure
sites or expensive equipment is leased out, the Solar
Integrated Solar Panel
Powered ATX2S, packaged in a ruggedized waterproof
IP67 enclosure with an integrated solar panel, removes Long battery life, powered by up to
maintenance needs and provides security and peace two 7800mAh rechargeable lithium
of mind that assets are safe and where they should be. battery packs
The Solar power GPS device is the ideal solution for:
container tracking, trailer tracking and any asset tracking. Small size, installs in minutes.

Available on 4G CATM1/NB1

THE INDUSTRY‘S #1 RATED SOLAR POWERED DEVICE WITH AN EXTREMELY LONG BATTERY LIFE

DIFFERENTIATE VIA INNOVATION

1050 Wall Street, suite 340, Lyndhurst, NJ. Tel: 201-531-5906, www.wlius.com, marketing@wlius.com
TECHNICAL SPECIFICATIONS
CONNECTIVITY POWER

Network 4G CATM1/NB1 with 2G Fallback. Supported Battery powered by either 4000mAh or up to two
bands Cat.M1 & NB1, LTE-FDD:B1/B2/B3/B4/B5/ Power Source 7800mAh rechargeable lithium batteries.
B8/B12/ B13/B18/B19/B20/B26/B28 LTE-TDD: Optionally can be tethered to 6DC-32VDC asset
B39 (for Cat.M1 only) GSM850/GSM900 battery

Transmit Mode 1.8A pulse at 3VD


Storage Store & Forward- Built-in flash storage for data
logging when out of cellular connectivity

Sleep Mode 10uA at 3V


Communication Highly compressed OTA, UDP communication
packaged with MidLink Middleware or Direct TCP/
IP communication
Battery Life Up to 10,000 GPS positions when powered by two
7800mAh battery packs.
Wireless Compatible with WLI Family of RF Beacons
Sensors
Solar Panel Integrated 0.5W Solar Panel

Charging Integrated fast charger module. Batteries are


RF COMMUNICATION charged via external off the shelf standard 12v wall
charger. Charge time around 4-8 hours depending
on battery capacity.

2.4GHz proprietary protocol, BLE (supports


Radio Frequency iBeacons, TLM and custom protocols).

Range Up to 220 ft / 70m. Actual range may vary MAIN FEATURES


depending on RF interference, building
materials, and physical obstacles

• Asset tracking mode of operation –can be preprogramed to send the


Data Transmit Automatically connects to any associated Piccolo GPS location every XX hours (usually once a day) when the asset is in
and transmits every 20 seconds stop position. When vibration is detected the unit wakes up automatically
and sends an alarm and switches to motion mode sending GPS every
XX minutes for as long as the asset is in motion mode (usually every 60
minutes)

• Hybrid - Dual Mode operation for Trailer Tracking When the Piccolo
ATX2S is wired to an external power source such as trailer connected to
the cabin, the ATX-2S internal batteries will be charged and the ATX-2S
will operate in real-time sending GPS say every minute. When the cabin
ENCLOSURE disconnects from the trailer the external power is disconnected and the
ATX2S will automatically switch to be powered by the internal battery and
will switch to asset tracking mode (described above).

• Geofence mode of operation – the unit can change the frequency


PLUSTEK PB5001J8BK11 Black, 40% Glass Fiber of transmitting GPS when entering a pre-configured geofence to be
Material & Glass beads Reinforced, Halogen and Red detected at first ATX-2S wake up.
Phosphorus Free, Flame Retardant, UV Stabilized
• The ATX2S sends notifications to the server when and where the
Polyamide 6 external power is connected/disconnected

• With every GPS message, the ATX2S sends the battery level and current
temperature inside the unit.
Dimensions 7.3” x 2.8” x 1.6” LWD (185mm x 73mm x 41mm)
• Weight: 9 oz.(255gr) without batteries • Vibration sensor – for automatic security theft alarm and motion
detection

• Tow Detection – the unit detects when the vehicle is moving. Extremely
Operating -22° to 176° F (-30° to 80° C)
low power consumption achieved by innovative battery management to
preserve battery life
Temperature

Storage
-40° to 221°F (-40° to 105°)
Temperature

IP Rating IP67 waterproof enclosure

1050 Wall Street, suite 340, Lyndhurst, NJ. Tel: 201-531-5906, www.wlius.com, marketing@wlius.com
IOT APPLICATIONS

ASSET TRACKING

CHASSIS TRACKING

1050 Wall Street, suite 340, Lyndhurst, NJ. Tel: 201-531-5906, www.wlius.com, marketing@wlius.com

You might also like