Installing MotoSim EG-VRC
1. It is strongly recommended that you exit all applications before running the setup program.
NOTE
Be sure to login in administrator mode when installing the MotoSim EG-VRC in
Windows 7/10, or else the system related DLL files in Windows might not be updated.
2. Insert the installation DVD into the DVD drive.
3. If want to install the 32-bit version, run the "¥setup_32bit¥setup.exe". If want to install the 64-bit version,
run the "¥setup_64bit¥setup.exe". When the User Account Control dialog is displayed, click [Yes].
[MotoSim EG-VRC InstallShield Wizard] will be displayed.
4. Follow the on-screen instructions.
NOTE
If the following message appears during the installation, press [Yes] to continue installation.
This message is displayed when the installation of redistribution package of Visual C ++2012
has been executed but installation is required. If this message is displayed, run manually
•In case MotoSim EG-VRC is 64-bit application
In the Install DVD,
(1)¥setup_64bit¥ISSetupPrerequisites¥{BF2F04CD-3D1F-444e-8960-D08EBD285C3F}¥
vcredist_x86.exe
(2)¥setup_64bit¥ISSetupPrerequisites¥{3A3AF437-A9CD-472f-9BC9-8EEDD7505A02}¥
vcredist_x64.exe
•In case MotoSim EG-VRC is 32-bit application
In the Install DVD,
¥setup_32bit¥ISSetupPrerequisites¥{BF2F04CD-3D1F-444e-8960-D08EBD285C3F}¥
vcredist_x86.exe
after installing MotoSim EG-VRC, and install or repair the redistribution package of VisualC ++
2012.
5. When the setup is completed, MotoSim EG-VRC is registered under the {MotoSim EG-VRC} folder
that appears by clicking the [Start] button in the task bar and selecting {Program} and then {Motoman}.
6. Connect the hardware key to the printer port or USB port. For details, refer to " Hardware Key " in this
chapter.
Hardware Key
For proper operation, connect provided hardware lock key (USB type) to the personal computer before
using this software.
Chack and execute <Checking the computing environment> <Installing the driver> before connecting the
key to USB port.
<Checking the computing environment>
Multi-connection of USB type key is not available for one USB port because of hardware structure.
Therefore, only one key can be connected to one USB port. When installing multiple offline software into
one personal computer and multi-connectiong USB keys, use the personal computer which is provided
same numbers of USB ports as the number of software to be installed.
<Installing the driver>
NOTE
Please install the driver after detaching the all sentinel hardware key from the
personal computer.
Execute "¥SentinelDriver¥Sentinel System Driver Installer 7.6.0.exe" of installation DVD. Refer to
"¥SentinelDriver¥Manual¥Sentinel System Driver ReadMe.pdf" for the details of installation.
NOTE
･Be sure to install the driver.
･When installing the driver, be sure to login in administrator mode in order to add files to system
folder and input information in registry.
･If a key is connected to personal computer before installing the driver, the message
concerning the driver is displayed. In this case, and detach the key from personal computer and
then install the driver.
