0% found this document useful (0 votes)
137 views4 pages

Datasheet AEQQi21

The document provides specifications for the Interleaved Active Passive Antenna 2.1m 2L6H, a hybrid antenna designed for 5G 3.5GHz and legacy bands. It includes details on electrical, mechanical, and environmental specifications, as well as configuration requirements for optimal performance. The antenna consists of a Base Module and an applicable Top Module, enabling advanced features like 4x4 MIMO and multiband support.

Uploaded by

hanajmi2015
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
137 views4 pages

Datasheet AEQQi21

The document provides specifications for the Interleaved Active Passive Antenna 2.1m 2L6H, a hybrid antenna designed for 5G 3.5GHz and legacy bands. It includes details on electrical, mechanical, and environmental specifications, as well as configuration requirements for optimal performance. The antenna consists of a Base Module and an applicable Top Module, enabling advanced features like 4x4 MIMO and multiband support.

Uploaded by

hanajmi2015
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Product Specification

Interleaved Active Passive Antenna 2.1m 2L6H


Consisting of Base Module CS7801001 and applicable Top Module

Modular hybrid antenna (active+passive)


Enabling deployment of 5G 3.5GHz and legacy bands using only one antenna Top module
Interleaved design allows utilising full length for low band arrays, allowing
similar gain as in legacy antenna without increasing total configuration height
Passive part with 4-ports/band to enable 4x4 MIMO and 4-way RX diversity
Base module
Base and Top Module together form the functional configuration
For 3.5GHz specifications please check the relevant Top module datasheet

General Specifications

Product type Hybrid antenna, consisting of Base Module and applicable Top
Module
Antenna type 65 deg panel, multiband 16-port
694-960MHz, 1427-2690MHz

Radio Configuration for 5G 3.5GHz 8T8R, 32T32R, 64T64R (depending on Top Module)
notes Base module and Top module are both needed for functional
configuration. For list of available Top modules please contact
your Nokia representative.
Specification on this datasheet generally refer to full IPAA
configuration.

Confidential © Nokia Networks 2020


Product Specification v1.3 Made for Nokia by Commscope
Electrical Specifications

Array R1/R2 R1/R2 R1/R2 B1/B2 Y1/Y4 Y2/Y3 Y2/Y3 Y2/Y3


694- 790- 890- 1695- 2490- 1427- 1695- 2490-
Frequency Band,MHz
790 890 960 2180 2690 1518 2180 2690
Gain by all Beam Tilts, 14.3 14.7 14.7 15.8 16.8 14.7 16.1 17.3
average, dBi
Beamwidth, Horizontal, 68 63 65 68 55 68 64 56
degrees
Beamwidth, Vertical, degrees 11.7 10.6 10 7.2 5.7 9.6 7.4 5.7
Beam Tilt, degrees 2-12 2-12 2-12 2-12 2-12 2-12 2-12 2-12
USLS (First Lobe), dB 15 15 15 15 16 16 16 16
Front-to-Back Ratio at 180°, 28 28 28 32 28 35 34 32
dB
Isolation, Cross Polarization, 27 27 27 27 27 26 26 26
dB
Isolation, Inter-band, dB 27 27 27 27 27 27 27 27
1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
VSWR | Return loss, dB 1.5 | 14.0
14.0 14.0 14.0 14.0 14.0 14.0 14.0
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150 -150 -150
Input Power per port,
Maximum (at elevated temp 300 300 300 250 150 250 250 200
50°C), Watt
Beamwidth, Horizontal ±6.2 ±6.2 ±6.2 ±6.2 ±6.2 ±6.2 ±6.2 ±6.2
Tolerance, degrees
Beamwidth, Vertical ±1.1 ±1.1 ±1 ±0.8 ±0.6 ±0.9 ±0.9 ±0.7
Tolerance, degrees
USLS, beampeak to 20° above 16 15 15 12 13 15 16 16
beampeak, dB
Front-to-Back Total Power at 20 20 21 24 22 25 27 24
180° ± 30°, dB
CPR at Boresight, dB 18 19 19 18 19 16 19 17
CPR at Sector, dB 10 9 10 6 3 7 6 4

Confidential © Nokia Networks 2020


Product Specification v1.3 Made for Nokia by Commscope
Array ID Frequency RF- RET
connector

3.5GHz R1 694-960 1-2 1


R2 694-960 3-4 2
B1 1695-2180 5-6 3

Y1 Y4 B2 1695-2180 7-8 3
Y1 2490-2690 9-10 4
Y2 Y3
Y4 2490-2690 15-16 4
Y2 1427-2690 11-12 5
B1 B2

R1 R2 Y3 1427-2690 13-14 6
3.5GHz Depending on selected top module
Array layout

Port configuration

Mechanical and Connectivity Specifications

Radome Material Fiberglass, UV resistant


Colour Light grey
Passive Ports (Base module) 4 x 694-960MHz
4.3-10 4 x 1427-2690MHz
4 x 1695-2180MHz
4 x 2490-2690MHz
Lightning Protection DC Ground
Mechanical Tilt Optional 0-12deg
Mounting Pole 80-120mm
RET connectors AISG 8-pin female, AISG 8-pin male

Confidential © Nokia Networks 2020


Product Specification v1.3 Made for Nokia by Commscope
Dimensions

Height (full IPAA configuration) 2.09 m


Height (Base module only) 1265 mm
Width 498 mm
Depth (Base module only) 197 mm (excluding mounting part)
Weight (Base module only) 32.5 kg (excluding mounting brackets)
Weight (Full IPAA configuration) typically 70-110kg (depends on top module)
Dimensions packed (Base module only) 1896mm x 620mm x 377mm
Weight packed (Base module only) 59 kg

Environmental Specifications

Operational air temperature range - 5°C


Wind load F/L/R with mMIMO top 803/581/793N
module (150km/h)
Wind load F/L/R with 8T8R top module 803/647/793N
and RRH (150km/h)

Confidential © Nokia Networks 2020


Product Specification v1.3 Made for Nokia by Commscope

You might also like