Bralette pattern for spandex fabrics 0122
Bustier dress printable in A4
Bustier dress printable in US letter
Bustier dress printable in A0
Book of instructions
1cm/0.4-inch Seam allowances
already included in the
Sewing paern -Bralee
pattern of bustier.
Pick Your size
The pattern includes 7 sizes XXS to XXL: 34 to 46 Europe size,
4 to 16 US size and 6 to 18 UK size
Choose your size using the size chart below:
Legend
Thread direction
Size 46
Size 44
Size 42
Size 40
Size 38
Size 36
Size 34
Printing
Pattern is in real size just make sure to set printer at 100% scale or real size when
printing.
You have 3 printing options available:
A4 size, Letter Size & A0 size. You can print our patterns at home if you have a printer or
send them to the online/ local printing shop.
Ensure you print at actual size (100%scale).
Verify that the print out size is correct by measuring the 2-centimeter scale on the
pattern “using a ruler”
Cut and glue pattern details with a sticky tape.
Materials for bralette:
Which fabric you should use for this pattern?
If you are looking for that sexy bustier look I recommend you use a stretchy fabric with a 25% to 50%
percentage of elastane in composition to have that perfect fitted bralette. Fabric choice for this pattern will
depend on your preference, you could choose soft, thick or medium-thick fabric depending on the look
you are going for
What will you need to make this bustier?
Fabric: You will need around 20cm or 8 inch of fabric (width of fabric around 1yard)
Additional material (Optional )
This is optional as this is a bralette with non-padded cups and without boning. The pattern instructions
doesn't provide it, but you can use this pattern to sew the bustier with boning, underwire, and foam
padded cups only if you know how and have such experience. But this model's idea is supposed to be
easy bustier top for beginners, so I didn't how and have such experience. But this model's idea is
supposed to be easy bustier top for beginners, so I didn't want to complicate it. You will need:
2 bra underwire
2 boning 20 cm/ 8 inch for front
2 boning 20 cm/ 8 inch middle back
2 boning 20 cm/ 8 inch side back
Pattern Pieces
A – Front Center of bralette, cut on folded fabric
B- Front side of dress, cut 2
C- Back side of dress, cut 2
D- Back Center of dress, cut on folded fabric
E- Lower cup side piece, cut 2
F- Lower Cup Center piece, cut 2
G- Upper bust cup, cut 2
Dress pattern does not include straps but you
can cut 2 rectangular pieces 52*4 cm (20.4*1.5
inch)
1. Sew front panels together
Sew front panels together, front center pattern of bralette (A) with front
side (B). Sew them together and iron flat the seam
2. Sew back panels together
D
c
Sew the back pieces of the top together, the back center pattern of
the bralette (D) with the back side (C ) pieces. Sew them together and
iron flat the seam and topstitch.
3.Sew front panels to back panels together
4. Sew Cups
Sew lower cup center piece (F) with lower cup side
piece (E) and iron flat the seam. Pin the upper bust
cup (G) to lower cup pieces( E &F ) then sew and iron
flat the seam.
5. S ew cups to dress
Place your cups to dress right side fabric together and
start sewing the two together while moving slowly into
the curve line, cut excess seam around the curve lines and
iron flat the seam
6. Sew facing and straps to bodice
Fold the straps right side fabric matching each other
and sew all along the long side and turn the straps
inside out
Pin your strap piece
to the cups with the
right side fabric
facing each other.
Note: make sure you try the dress when you pin
straps to make sure you are happy with length of
the straps and adjust if needed.
7. Finnish the bottom
Double fold on the bottom of your bralette at 1cm and
stitch along all the bottom.
2cm
or 0.78in
Example for correct
printer settings:
measure the cube
before cutting the pattern.
6 66 6 6 6 6
Folded fabric
Back-Center
of dress
Cut on
folded
fabric
D
Upper bust Cup
Cut 2
G 4 4 4
4
5 5 5 5 5 5
5
3
E F
3 3 33
3
33
Lower Cup Side Lower Cup
piece Center piece
Cut 2 Cut 2
