4 NA-NB-NF series modular pre-wired switches

Description
The result of the long-standing expertise of Pizzato Elettrica in the creation of position switches, the
NA, NB, NF series achieve the highest standard of flexibility and depth of range present today on the
pre-wired switches market.
Configurable, adjustable, pivotable and, not least, customisable with special cables or custom wiring
- these features make these series unique in the current European panorama, ideal for easily provid-
ing our customers with customised switches.

Switches with connectors Head with variable orientation

The new fundamental feature of this series of pre- All heads can be turned in 90° steps. The new head for swivelling
wired switches is that the switch body and the wired levers has been designed with compact dimensions so that it does
connector are separated. not protrude over the switch profile. Therefore, it is also possible to
Using the connector the end-user can replace a prod- install the switches on the wall.
uct on field without having to disconnect the com-
plete wiring.
Moreover in this way it is easier to combine products
with different cable types and lengths.

Protection degrees IP67 and IP69K Reversible levers

These devices are designed to be used under For switches with swivelling lever,
the toughest environmental conditions, and the lever can be fastened on
they pass the IP67 immersion test acc. to straight or reverse side maintain-
EN 60529. They can therefore be used in all ing the positive coupling.
environments where the maximum degree In this way two different working
of protection is required for the housing. Due planes of the lever are possible.
to their special design, these devices are suitable for use in equip-
ment subjected to cleaning with high pressure hot water jets. These
devices meet the IP69K test requirements according to ISO 20653
(water jets with 100 bar and 80°C).

Adjustable levers Orientable cable outputs

For switches with swivelling lever, the lever can 10° The connector with cable is provided
be adjusted in 10° steps over the entire 360° with a cavity to allow cable bending
range. up to 90°.
The positive movement transmission is always In this way a flush wall mounting is
guaranteed thanks to the particular geometrical also possible as well as an easier
coupling between the lever and the revolving adjustment of the cable to the sup-
shaft as prescribed for safety applications by the porting flange.
German standard BG-GS-ET-15.

90° redirection for actuators Unidirectional heads

This component highly extends the application pos- All switches with swivelling lever are supplied with a selector for
sibilities of this product range. choosing the lever operating direction.
All the actuators that can be attached directly to the The following operations are possible: right/left (standard factory set-
body of the switch can also be fastened on this trans- ting), only from the right or only from the left. The operating direction
mission, thus making feasible applications and posi- can be selected by rotating the dedicated ring mounted on all heads
tioning of the switch that were previously impossible. of this kind.
The redirection piece can also be used in case of heads for swivelling
levers. Although technically possible, the use of multiple transmis-
sions in series is not recommended.

101 General Catalogue Detection 2025-2026

 4
Increased or reduced actuating force Adjustable levers with anti-unscrewing washer
For actuators with swivelling lever, versions with increased or In some applications during the
reduced actuating force are available upon request, in order to have installation of the switches prob-
a switch perfectly tailored for the application. For further information lems are encountered due to the
contact our technical department. variability of the fastenings and +2 mm
the folds of the structural work.
In other cases, small finishing -5 mm
adjustments are required due
to the application. Nearly all
Mt swivelling levers for switches of
the NA, NB and NF series can be adjusted in 1 mm steps along the
switch length.
This feature, combined with the additional possibility of the radial
adjustment of the actuator, provides the installer with a never before
achieved flexibility in the final adjustment of the product.
Increased Standard Reduced All this while maintaining the positive geometric locking between
force force force lever and swivel shaft as prescribed for safety applications.
Mt = 0.09 Nm Mt = 0.07 Nm Mt = 0.04 Nm
(E25 option, NA- (E24 option)
NB series)

Positive opening contact blocks with 1, 2, 3 or 4 poles Switch components available separately
These series of contact blocks are versatile and This product series has been provided with a modular design so that
compact. single parts can also be ordered separately. This is an asset both for
They have the same dimensions of the previous distributors and for final customers of electrical material in the pro-
versions, but now it is possible to have up to 4 dif- curement of spare parts as well as for custom combinations.
ferent contacts which are galvanically separated
and provided with positive opening (NC contacts).
The allowed standard combinations are: 1NO+1NC, NA B110BB-DN2 NA B11000 VN AA0BB VN CM11DN2
2NC, 1NO+2NC, 2NO+2NC. Other combinations
available on request.
The contact blocks have been designed so that
they keep the same pin assignment on the connec-
tor independently of the action type (slow or snap
= + +
action) and the number of contacts. In this way, the
same cables with connector can be used for units
with slow action and snap action as well.

Reversible housing Extended temperature range

The shape of the fixing holes and of the switch body, as well as These devices are also available in a special
the possibility of rotating the head, make this switch perfectly version suitable for an ambient operating
symmetrical. temperature range from -40ºC up to +80°C.
If a switch with cable output on the left (since the connector cannot They can therefore be used for applications in cold stores, sterilis-
be rotated) is required, it is possible to rotate the complete device by ers, and other equipment operated in very low-temperature environ-
maintaining the final position of the actuator unchanged. ments. The special materials used to produce these versions retain
their characteristics even under these conditions, thereby expanding
the installation possibilities.

AMP connectors
Furthermore, AMP connectors for 2-contact versions are
available too. These connectors, specially developed for
the automotive industry, are immune to vibration due to
the quick coupling.

M12 connectors
All contact configurations are available with
M12 connector both with two contacts (with High reliability contacts with “V” design
5-pin M12 connector) as well as 3 or 4 con- Articles with contact block C11, C02,
tacts (with 8-pin M12 connector). Exit direc- C12, C22 are characterised by electrical
tions below or to the right allow application contacts with a "V” design. This configu-
in narrow spaces; in addition the reversible ration reduces the possibility of error
housing easily allows changing the exit direc- during operation and guarantees even
tion from right to left by simply turning the more reliable contact switching, thanks
switch. The M12 connector is also available to the contact points doubled compared
at the end of the cable, whose length can to the flat-shaped contacts and the self-
be tailored to the customer's requirements, cleaning action of the contact. In the
and the cable can be bent at 90°, allowing version with snap action contact, these
installation on walls. articles are particularly suitable for use in
the railway sector.

General Catalogue Detection 2025-2026 102

4 NA-NB series modular metal pre-wired switches

Selection diagram for item combinations of the NA-NB series

0AA 0AB 0AC 0AE 0BB 0BE 0BG 0CB 0CH

Short Plunger Long Plunger Roller Roller plunger Roller plunger Roller Angled lever
plunger plunger and external plunger and external and external lever with roller
gasket gasket gasket

0AB-W5 0BB-H0W5 0BB-W5 0HB-W5 0HE-W5 0HH-W5

Plunger Roller plunger Roller plunger Spring rod with Spring rod Spring rod with
plastic tip wire tip

ACTUATORS

2KA 2KB 2KC 2KD 2KE 2KF 2KG 2KH 2KP

Plastic Metal Metal Metal Metal Metal Metal Metal Metal
swivelling swivelling swivelling swivelling swivelling swivelling swivelling swivelling swivelling
lever, straight, lever, straight, lever, profiled, lever, profiled, lever, profiled, lever, straight, lever, profiled, lever, profiled, lever, straight,
with roller adjustable, adjustable, adjustable, adjustable, adjustable, adjustable, adjustable, with extended
Ø 18 mm with roller with roller with roller with roller with roller with roller with roller adjustment and
Ø 18 mm Ø 14 mm Ø 14 mm Ø 20 mm Ø 20 mm Ø 20 mm Ø 20 mm Ø 20 mm roller

Snap action
B11 1NO + 1NC
B02 2NC
CONTACT B12 1NO + 2NC
BLOCKS B22 2NO + 2NC
BA1 1NO + 1NC change-over

Slow action Slow action, make before break

NA NB
G11 1NO + 1NC H11 1NO + 1NC
G02 2NC H12 1NO + 2NC
G12 1NO + 2NC H22 2NO + 2NC
G22 2NO + 2NC

Slow action, close Snap action, "V” design contacts

CONNECTIONS
L11 1NO + 1NC C11 1NO + 1NC
L12 1NO + 2NC C02 2NC
L22 2NO + 2NC C12 1NO + 2NC
C22 2NO + 2NC

DMK SMK DM0.2 SAK Connector with cable

M12 connector, M12 connector, Cable and M12 AMP connector, DN PVC cable IEC 60332-1, oil-resistant (standard)
right bottom connector bottom
DE PVC cable IEC 60332-1 (with 2 contacts only)
DH PUR cable, halogen free
DR Rail cable EN 50306-4

Product options
Sold separately as accessory

103 General Catalogue Detection 2025-2026

 4

0CP 0CV 0EB 0EE 0FB 0GB 0HB 0HE 0HH

Unidirectional Adjustable angled Plunger with M12 Plunger with M12 Roller plunger Plunger with External gasket, External gasket, External gasket,
roller lever roller lever threaded fitting threaded fitting with M12 Ø 6 mm ball spring rod with spring spring rod with
and external threaded fitting plastic tip rod wire tip
gasket

SEPARATE
ACTUATORS
See page 123

2LB 2LE 2LH 2LL 2LP 200

Metal swivelling Metal swivelling Metal swivelling Metal swivelling Metal swivelling Metal head
lever with lever with lever with lever with spring lever with for swivelling
stainless steel rod stainless steel rod glass fibre rod rod, adjustable porcelain roll, lever actuators
3 x 3 x 125 mm, Ø 3 x 125 mm, Ø 6 x 200 mm, adjustable
adjustable adjustable adjustable
Code structure Attention! The feasibility of a code number does not mean the effective availability of a product. Please contact our sales office.
article options
Redirection
NA B110AB-DN2 GR7T6W5 without redirection
W5 90° redirection
Housing
NA metal, hole spacing 20 mm (standard) Ambient temperature
NB metal, hole spacing 25 mm -25°C … +80°C
T6 -40°C … +80°C
Contact block
Rollers
B11 1NO+1NC, snap action (standard)
standard roller
B02 2NC, snap action (standard)
R30 Steel, with self-lubrication, Ø 10.6 mm
B12 1NO+2NC, snap action (standard) R44 316L stainless steel, Ø 12 mm
B22 2NO+2NC, snap action (standard) R29 Steel, with self-lubrication, Ø 13 mm
1NO+1NC, snap action, change-over R18 technopolymer, Ø 14 mm
BA1
(available with M connector only) R23 Steel, with self-lubrication, Ø 14 mm
C11 1NO+1NC, snap action, "V” design contacts R43 316L stainless steel, Ø 14 mm
C02 2NC, snap action, "V” design contacts R36 steel, with self-lubrication, Ø 16 mm
R7 technopolymer, Ø 18 mm
C12 1NO+2NC, snap action, "V” design contacts
R22 technopolymer, Ø 20 mm
C22 2NO+2NC, snap action, "V” design contacts R24 steel, with self-lubrication, Ø 20 mm
G11 1NO+1NC, slow action (standard) R41 316L stainless steel, Ø 20 mm
G02 2NC, slow action (standard) R19 technopolymer, Ø 22 mm
G12 1NO+2NC, slow action (standard) R25 technopolymer, Ø 35 mm
G22 2NO+2NC, slow action Contact type
H11 1NO+1NC, slow action, make before break silver contacts (standard)
H12 1NO+2NC, slow action, make before break G silver contacts with 1 µm gold coating (1)
H22 2NO+2NC, slow action, make before break (1)
Not available for contact block C••
L11 1NO+1NC, slow action, close Connection type
L12 1NO+2NC, slow action, close 0.2 cable, length: 0.2 m with M12 connector
(available for DM0.2 versions only)
L22 2NO+2NC, slow action, close
Other contact blocks on request. 2 cable, length: 2 m (standard)
5 cable, length 5 m (other cable lengths available on request)
Actuators K integrated connector
Actuator heads
00 without actuator Cable or connector type
0 without head
AA short plunger
head for swivelling lever N PVC cable IEC 60332-1, oil-resistant (standard)
2 AB plunger E PVC cable IEC 60332-1 (with 2 contacts only)
actuators
... ... H PUR cable, halogen free
Output direction R Rail cable EN 50306-4
D cable or connector, right M M12 connector
S connector, bottom A AMP Superseal 1.5 connector

General Catalogue Detection 2025-2026 104

4 NA-NB series modular metal pre-wired switches

Technical data
Housing
Metal housing, baked with UV resistant powder coating.
Versions with integrated cable, standard length 2 m, other lengths 0.5 … 10 m on
request.
Versions with integrated M12 connector.
Versions with 0.2 m cable length and M12 connector, other lengths 0.1 … 3 m avail-
able on request.
Protection degree: IP67 acc. to EN 60529
IP69K acc. to ISO 20653
(Protect the cables from direct high-pressure and
high-temperature jets)
Corrosion resistance in saline mist: ≥ 300 hours in NSS acc. to ISO 9227

General data
Ambient temperature for switches without cable: -25°C … + 80°C (standard)
-40°C … + 80°C (T6 option)
Ambient temperature for switches with cable: See table on page 106
Max. actuation frequency: 3600 operating cycles/hour
Mechanical endurance:
B••, G••, H••, L•• contact blocks: 20 million operating cycles
Main features C•• contact block: 5 million operating cycles
Mounting position: any
• Metal housing, right or bottom cable output
Safety parameter B10D:
• Protection degrees IP67 and IP69K B••, G••, H••, L•• contact blocks: 40,000,000 for NC contacts
C•• contact block: 10,000,000 for NC contacts
• 4 types of integrated cable available
Mechanical interlock, not coded: type 1 acc. to EN ISO 14119
• Versions with M12 connector suitable for Vibration resistance 5 … 150 Hz (7.9 m/s2)
safety applications (0BB, 2KB, 2KC, 2KD actuators): acc. to EN 61373 cl. 9
• Versions with AMP connector Tightening torques for installation: see page 225

• 19 contact blocks available Electrical data

Rated impulse withstand voltage (Uimp): 4 kV
• 36 actuators available Conditional short circuit current: 1000 A acc. to EN 60947-5-1
Pollution degree: 3
Quality marks:
In compliance with standards:
IEC 60947-5-1, EN 60947-5-1, IEC 60947-1, EN 60947-1, IEC 60204-1, EN 60204-1, EN ISO 14119,
EN ISO 12100, IEC 60529, EN 60529, EN IEC 63000, ISO 20653, UL 508, CSA C22.2 No. 14.
IMQ approval: CA02.04562
UL approval: E131787 Compliance with the requirements of:
CCC approval: 2024010305656745 Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU,
EAC approval: RU Д-IT.PA07.В.37848/24 RoHS Directive 2011/65/EU.
Positive contact opening in conformity with standards:
IEC 60947-5-1, EN 60947-5-1.

Installation for safety applications:

Use only switches marked with the symbol beside the product code. Always connect the safety circuit to the NC contacts (normally
closed contacts: see “Internal cable wiring” on page 106) as required by EN ISO 14119, paragraph 5.4 for specific interlock applications and
EN ISO 13849-2 tables D3 (well-tried components) and D.8 (fault exclusions) for safety applications in general. Actuate the switch at least
up to the positive opening travel shown in the travel diagrams on page 226. Actuate the switch at least with the positive opening force,
reported in brackets below each article, next to the actuating force value.

If not expressly indicated in this chapter, for correct installation and utilization of all articles see chapter Utilization requirements
from page 217 to page 232.

Important: Switch off the circuit voltage before disconnecting the connector from the switch. The connector is not suitable for
separation of electrical loads. According to EN 60204-1, versions with 8-pole M12 (2NO+2NC) and AMP connector can be used only in
SELV circuits.

Features approved by IMQ Features approved by UL

Rated insulation voltage (Ui): 250 Vac Electrical Ratings: R300 pilot duty (28 VA, 125 250 Vdc)
Conventional free air thermal current 10 A (1-2 contacts) / 6 A (2-3 contacts) / B300 pilot duty (360 VA, 120 240 Vac) (1 cont.)
(Ith): 4 A (4 contacts or 5-pole M12 connector) B300 pilot duty (360 VA, 120 240 Vac) (2 - 3 cont.
Protection against short circuits 10 A (1-2 contacts) / 6 A (2-3 contacts) /
without connector)
(fuse): 4 A (4 contacts or 5-pole M12 connector) type gG
Rated impulse withstand voltage 4 kV C300 pilot duty (180 VA, 120 240 Vac) (4 cont.)
(Uimp): Environmental Ratings: Types 1, 4X, 6, 12, 13
Protection degree of the housing: IP67 / IP69K Types 1, 4X "indoor use only" (1 - 2 cont. with
Terminals: integrated or connector plug "E" type cable)
Pollution degree: 3 Screws torque of the detachable connector housing nominal are 0.3 ÷ 0.6 Nm.
Utilization category: AC15 / DC13 (with connector)
Operating voltage (Ue): 250 Vac (50 Hz) / 24 Vdc (with connector)
Operating current (Ie): 3 A / 2 A (with connector)
Forms of the contact element: X, Y, X+Y, X+X, Y+Y, Y+Y+X, X+X+Y, X+X+Y+Y, Zb Please contact our technical department for the list of approved products.
Positive opening of contacts on contact blocks B01, B11, B02, B12, B21, B22, G01,
G11, G02, G12, G21, G22, L01, L11, L02, L12, L21, L22, H01, H11, H02, H12, H21, H22
In compliance with standards: EN 60947-1, EN 60947-5-1, fundamental require-
ments of the Low Voltage Directive 2014/35/EU.
Please contact our technical department for the list of approved products.

105 General Catalogue Detection 2025-2026

 4
Ambient temperatures for switches with cable and electrical data
Output with
Connection type Output with cable Output with M12 connector AMP con-
nector

Contact block 2 contacts 3 contacts 4 contacts 2 contacts 3 or 4 contacts 2 contacts

Cable or connector type E N H R N H N R M12 connector, M12 connector,

5-pole 8-pole
AMP Super-
seal
1.5 con-
Conductors 5x0.75 mm2 5x0.75 mm2 5x0.75 mm2 5x0.5mm2 7x0.5 mm2 7x0.5 mm2 9x0.34 mm2 9x0.5 mm2 5x0.25 mm2 8x0.25 mm2 nector

Application field General General General, mobile Rail General General, mobile General Rail General General General
installation installation

In compliance with H05VV-F 05VV5-F 05EQ-H 1E-300V 03VV-F 03E7Q-H 03VV-F 1P-300V- 03VV-H 03VV-H /
standards 5G0,5 mm2 9G0.5 mm2
MM-90 MM-90
EN 50306-4 EN 50306-4
EN 45545 EN 45545

Sheath PVC PVC PUR / PVC PUR PVC / PVC PVC /

OIL RESISTANT HALOGEN OIL RESISTANT HALOGEN OIL RESISTANT OIL RESISTANT OIL RESISTANT
FREE FREE
Cable features

Self-extinguishing IEC 60332-1-2 IEC 60332-1-2 IEC 60332-1-2 IEC 60332-1 IEC 60332-1-2 IEC 60332-1-2 IEC 60332-1-2 IEC 60332-1 IEC 60332-1-2 IEC 60332-1-2 /
UL 758:FT1 UL 758:FT1 EN 50305 UL 758:FT1 UL 758:FT1 UL 758:FT1 EN 50305 CEI 20-22 II CEI 20-22 II
CEI 20-22 II EN 50306-1 CEI 20-22 II CEI 20-22 II EN 50306-1 UL 758:FT1 UL 758:FT1

Oil resistant / UL 758 UL 758 / UL 758 UL 758 UL 758 / UL 758 UL 758 /

CSA 22.2 N°210 CSA 22.2 N°210 CSA 22.2 N°210 CSA 22.2 N°210 CSA 22.2 N°210 CSA 22.2 N°210 CSA 22.2 N°210

Max. speed / / 300 m/min / / 300 m/min / / 50 m/min 50 m/min /

Max. acceleration / / 30 m/s2 / / 30 m/s2 / / 5 m/s2 5 m/s2 /

Minimum bending radius 80 mm 80 mm 80 mm 60 mm 108 mm 80 mm 108 mm 65 mm 75 mm 90 mm /

Outer diameter 8 mm 8 mm 8 mm 6 mm 7 mm 7 mm 7 mm 6.5 mm 6 mm 6 mm /

End stripped 80 mm 80 mm 80 mm 80 mm 80 mm 80 mm 80 mm 80 mm / / /

Copper conductors IEC 60228 Class 5 Class 5 Class 6 Class 5 Class 5 Class 6 Class 5 Class 5 Class 6 Class 6 /

Engraving Standard 6268 6280 Standard 6274 6282 6278 Standard 6267 6275 /
Ambient temperature with cable

Cable, fixed installation -15°C +60°C -25°C +80°C -25°C +80°C -25°C +80°C -25°C +80°C -25°C +80°C -25°C +80°C -25°C +80°C -25°C +80°C -25°C +80°C /
standard

Cable, flexible installation +5°C +60°C -5°C +80°C -25°C +80°C -25°C +80°C -5°C +80°C -25°C +80°C -5°C +80°C -25°C +80°C -15°C +80°C -15°C +80°C /

Cable, mobile installation / / -25°C +80°C / / -25°C +80°C / / -15°C +80°C -15°C +80°C /
extended (T6)

Cable, fixed installation / / -40°C +80°C - 40°C +80°C / -40°C +80°C / -40°C +80°C / / /

Cable, flexible installation / / -40°C +80°C - 40°C +80°C / -40°C +80°C / -40°C +80°C / / /

Cable, mobile installation / / -40°C +80°C / / -40°C +80°C / / / / /

Thermal current Ith 10 A 10 A 10 A 6A 6A 6A 3A 4A 4A 2A 10 A

250 Vac 30 Vac

Rated insulation voltage Ui 250 Vac 250 Vac 250 Vac 250 Vac 250 Vac 250 Vac 250 Vac 250 Vac 30 Vac
300 Vdc 36 Vdc
10 A 10 A 10 A 6A 6A 6A 3A 4A 4A 2A 10 A
Protection against short
500 V 500 V 500 V 500 V 500 V 500 V 500 V 500 V 500 V 500V 500 V
Electrical data

circuits (fuse)
type gG type gG type gG type gG type gG type gG type gG type gG type gG type gG type gG
24 V 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A 2A
Utilization
category
DC13

125 V 0.4 A 0.4 A 0.4 A 0.4 A 0.4 A 0.4 A 0.4 A 0.4 A 0.4 A / /

250 V 0.3 A 0.3 A 0.3 A 0.3 A 0.3 A 0.3 A 0.3 A 0.3 A 0.3 A / /

24 V 4A 4A 4A 4A 4A 4A 3A 4A 4A 2A 4A
Utilization
category
AC15

120 V 4A 4A 4A 4A 4A 4A 3A 4A 4A / /

250 V 4A 4A 4A 4A 4A 4A 3A 4A 4A / /
CE cULus CE cULus CE cULus CE cULus CE cULus CE cULus CE cULus
CE IMQ CE IMQ CE cULus CE cULus
Approvals IMQ EAC IMQ EAC IMQ EAC
EAC CCC
IMQ EAC IMQ EAC IMQ EAC
EAC CCC
IMQ EAC
EAC EAC
CCC CCC CCC CCC CCC CCC CCC

Internal cable wiring Connector pin assignment

2NO+2NC 1NO+2NC 1NO+1NC 2NC 1NO+1NC
2NO+2NC 1NO+2NC 1NO+1NC 2NC
change-over
black black black black
1
black-white black-white grey grey 1 7 1 7
2 6 2 6 2 4
red red brown brown
3 5 3 5 4 1 2 3 4 1 2 3
4 4 1 1 3
8 8
red-white red-white blue blue 1 COMMON
1-2 NC 3-4 NC 2 4 2 4 2 NC
brown brown 3-4 NC 5-6 NC 3
yellow-green yellow-green 5 5
4 NO
5-6 NO 7-8 NO 3 3

blue blue 7-8 NO 1 1-2 NC 1-2 NC

3-4 NO 3-4 NC
purple 5 5
yellow-green
purple-white

yellow-green Female connectors See page 200

General Catalogue Detection 2025-2026 106

4 NA-NB series modular metal pre-wired switches

External gasket
Contact type
R = snap action
L = slow action

Ø7
Ø8
Ø8
Ø8

8.7 21.3
8.7 16.1
8.7 11.3
Ø11.6
8.7 8.8

Ø4. Ø4. Ø4. Ø4.

20 3 20 3 20 3 20 3
51.7

51.7

51.7

51.7
43

43

43

43
30 16 30 16 30 16 30 16
Contact block
B11 R NA B110AA-DN2 1NO+1NC NA B110AB-DN2 1NO+1NC NA B110AC-DN2 1NO+1NC NA B110AE-DN2 1NO+1NC

B02 R NA B020AA-DN2 2NC NA B020AB-DN2 2NC NA B020AC-DN2 2NC NA B020AE-DN2 2NC

B12 R NA B120AA-DN2 1NO+2NC NA B120AB-DN2 1NO+2NC NA B120AC-DN2 1NO+2NC NA B120AE-DN2 1NO+2NC

B22 R NA B220AA-DN2 2NO+2NC NA B220AB-DN2 2NO+2NC NA B220AC-DN2 2NO+2NC NA B220AE-DN2 2NO+2NC

G11 L NA G110AA-DN2 1NO+1NC NA G110AB-DN2 1NO+1NC NA G110AC-DN2 1NO+1NC NA G110AE-DN2 1NO+1NC

G02 L NA G020AA-DN2 2NC NA G020AB-DN2 2NC NA G020AC-DN2 2NC NA G020AE-DN2 2NC

G12 L NA G120AA-DN2 1NO+2NC NA G120AB-DN2 1NO+2NC NA G120AC-DN2 1NO+2NC NA G120AE-DN2 1NO+2NC

G22 L NA G220AA-DN2 2NO+2NC NA G220AB-DN2 2NO+2NC NA G220AC-DN2 2NO+2NC NA G220AE-DN2 2NO+2NC

Max. speed page 225 - type 4 page 225 - type 4 page 225 - type 4 page 225 - type 4
Actuating force 7 N (25 N ) 7 N (25 N ) 7 N (25 N ) 7 N (25 N )
Travel diagrams page 226 - group 1 page 226 - group 1 page 226 - group 1 page 226 - group 1

With steel roller with self-lubrication

Contact type
With 316L stainless steel roller on request External gasket External gasket
or 316L stainless steel on request
R = snap action With 316L stainless steel roller on request With 316L stainless steel roller on request
L = slow action

3.6 2.3 5.4

3.6 Ø12 3.6
Ø12 Ø14
Ø12 30.1
31.3

27.4
8.7 21.3

15.2
8.7

8.7

8.7

Ø4. Ø4. Ø4. Ø4.

20 3 20 3 20 3 20 3
51.7

51.7

51.7

51.7
43

43

43

43

30 16 30 16 30 16 30 16
Contact block
B11 R NA B110BB-DN2 1NO+1NC NA B110BE-DN2 1NO+1NC NA B110BG-DN2 1NO+1NC NA B110CB-DN2 1NO+1NC

B02 R NA B020BB-DN2 2NC NA B020BE-DN2 2NC NA B020BG-DN2 2NC NA B020CB-DN2 2NC

B12 R NA B120BB-DN2 1NO+2NC NA B120BE-DN2 1NO+2NC NA B120BG-DN2 1NO+2NC NA B120CB-DN2 1NO+2NC

B22 R NA B220BB-DN2 2NO+2NC NA B220BE-DN2 2NO+2NC NA B220BG-DN2 2NO+2NC NA B220CB-DN2 2NO+2NC

G11 L NA G110BB-DN2 1NO+1NC NA G110BE-DN2 1NO+1NC NA G110BG-DN2 1NO+1NC NA G110CB-DN2 1NO+1NC

G02 L NA G020BB-DN2 2NC NA G020BE-DN2 2NC NA G020BG-DN2 2NC NA G020CB-DN2 2NC

G12 L NA G120BB-DN2 1NO+2NC NA G120BE-DN2 1NO+2NC NA G120BG-DN2 1NO+2NC NA G120CB-DN2 1NO+2NC

G22 L NA G220BB-DN2 2NO+2NC NA G220BE-DN2 2NO+2NC NA G220BG-DN2 2NO+2NC NA G220CB-DN2 2NO+2NC

Max. speed page 225 - type 2 page 225 - type 5 page 225 - type 5 page 225 - type 3
Actuating force 7 N (25 N ) 7 N (25 N ) 7 N (25 N ) 5 N (25 N )
Travel diagrams page 226 - group 1 page 226 - group 1 page 226 - group 1 page 226 - group 2

NB series housing M12 connector, right M12 connector, bottom AMP Superseal 1.5 connector

38
8.7

5.3
M12 x 1

25 20 20 20
30.3
51.7

30.3
51.7

12.1
65.7
43

43

85.4
26.7

39.1

30 16 42.1 16
30 M12 x 1
31.7
To order a product of the NB series, To order a product with M12 right To order a product with M12 bottom To order a product with AMP connector,
replace NA with NB in the codes shown connector, replace DN2 with DMK in the connector, replace DN2 with SMK in the replace DN2 with SAK in the codes shown
above. Example: codes shown above. Example: codes shown above. Example: above. Example:
NA B110AA-DN2  NB B110AA-DN2 NA B110AA-DN2  NA B110AA-DMK NA B110AA-DN2  NA B110AA-SMK NA B110AA-DN2  NA B110AA-SAK

All values in the drawings are in mm Accessories See page 195  The 2D and 3D files are available at www.pizzato.com

107 General Catalogue Detection 2025-2026

 4

With steel roller with self-lubrication

Unidirectional operation Secured only by means of threaded head
Contact type or 316L stainless steel on request
R = snap action
L = slow action

It does not switch It switches

9.1 11 31.4(28.4-34.4) 20.2(17.2-23.2) 5.4

27.5 5.4 Ø9
Ø8

14 max
36.9
17

42.1
30.3

26.3
Ø2
Ø1
M12x1

2
4
8.7

8.7

8.7

8.7

3
Ø4. Ø4. Ø4. Ø4.
20 3 20 3 20 3 20 3

51.7

51.7

51.7

51.7
43

43

43

43
30 16 30 16 30 16 30 16
Contact block
B11 R NA B110CH-DN2 1NO+1NC NA B110CP-DN2 1NO+1NC NA B110CV-DN2 1NO+1NC NA B110EB-DN2 1NO+1NC

B02 R NA B020CH-DN2 2NC NA B020CP-DN2 2NC NA B020CV-DN2 2NC NA B020EB-DN2 2NC

B12 R NA B120CH-DN2 1NO+2NC NA B120CP-DN2 1NO+2NC NA B120CV-DN2 1NO+2NC NA B120EB-DN2 1NO+2NC

B22 R NA B220CH-DN2 2NO+2NC NA B220CP-DN2 2NO+2NC NA B220CV-DN2 2NO+2NC NA B220EB-DN2 2NO+2NC

G11 L NA G110CH-DN2 1NO+1NC NA G110CP-DN2 1NO+1NC NA G110CV-DN2 1NO+1NC NA G110EB-DN2 1NO+1NC

G02 L NA G020CH-DN2 2NC NA G020CP-DN2 2NC NA G020CV-DN2 2NC NA G020EB-DN2 2NC

G12 L NA G120CH-DN2 1NO+2NC NA G120CP-DN2 1NO+2NC NA G120CV-DN2 1NO+2NC NA G120EB-DN2 1NO+2NC

G22 L NA G220CH-DN2 2NO+2NC NA G220CP-DN2 2NO+2NC NA G220CV-DN2 2NO+2NC NA G220EB-DN2 2NO+2NC

Max. speed page 225 - type 3 page 225 - type 3 page 225 - type 3 page 225 - type 4
Actuating force 5 N (25 N ) 3 N (25 N ) 3 N (25 N ) 7 N (25 N )
Travel diagrams page 226 - group 2 page 226 - group 6 page 226 - group 3 page 226 - group 1

External gasket Secured only by means of threaded head Plunger with Ø 6 mm ball External gasket
Contact type With Ø12 mm roller in 316L stainless
Secured only by means of threaded head
R = snap action steel on request
L = slow action

56.5
Ø7 3.6

120.5
Ø12
13 max
16 max

Ø7
9.1

Ø8
39.3

37.3

17 17
M12x1 M12x1
8.7 3.5 8.7
8.7

8.7

8.7
3

Ø4. Ø4. Ø4. Ø4.

20 3 20 3 20 3 20 3
51.7

51.7

51.7

51.7
43

43

43

43

30 16 30 16 30 16 30 16
Contact block
B11 R NA B110EE-DN2 1NO+1NC NA B110FB-DN2 1NO+1NC NA B110GB-DN2 1NO+1NC NA B110HB-DN2 1NO+1NC

B02 R NA B020EE-DN2 2NC NA B020FB-DN2 2NC NA B020GB-DN2 2NC NA B020HB-DN2 2NC

B12 R NA B120EE-DN2 1NO+2NC NA B120FB-DN2 1NO+2NC NA B120GB-DN2 1NO+2NC NA B120HB-DN2 1NO+2NC

B22 R NA B220EE-DN2 2NO+2NC NA B220FB-DN2 2NO+2NC NA B220GB-DN2 2NO+2NC NA B220HB-DN2 2NO+2NC

G11 L NA G110EE-DN2 1NO+1NC NA G110FB-DN2 1NO+1NC NA G110GB-DN2 1NO+1NC /

G02 L NA G020EE-DN2 2NC NA G020FB-DN2 2NC NA G020GB-DN2 2NC NA G020HB-DN2 2NC

G12 L NA G120EE-DN2 1NO+2NC NA G120FB-DN2 1NO+2NC NA G120GB-DN2 1NO+2NC /

G22 L NA G220EE-DN2 2NO+2NC NA G220FB-DN2 2NO+2NC NA G220GB-DN2 2NO+2NC /
Max. speed page 225 - type 4 page 225 - type 2 page 225 - type 2 1 m/s
Actuating force 7 N (25 N ) 7 N (25 N ) 7 N (25 N ) 0.03 Nm
Travel diagrams page 226 - group 1 page 226 - group 1 page 226 - group 1 page 226 - group 4

Cable and M12 connector

20
M12 x 1

51,7
43

30 Ø 14
16

To order a product with cable and M12 connector

replace DN2 with DM0.2 in the codes shown above. Example:
NA B110AA-DN2  NA B110AA-DM0.2

All values in the drawings are in mm Accessories See page 195  The 2D and 3D files are available at www.pizzato.com

General Catalogue Detection 2025-2026 108

4 NA-NB series modular metal pre-wired switches

With Ø 20 mm steel roller with self- With Ø 20 mm steel roller with self-
External gasket External gasket
Contact type lubrication or 316L stainless steel on request lubrication or 316L stainless steel on request
R = snap action
L = slow action

87
7.6 32.9 30.2
Ø1.2
16.8 21.9
8
Ø18 Ø1

135.9
121.8

8.7 10.3 35 (30-37)

Ø7

35
5.4 5.4

18.1

18.1
8.7 10.3
8.7

8.7
Ø4. Ø4. Ø4. Ø4.
20 3 20 3 20 3 20 3
51.7

51.7

51.7

51.7
43

43

43

43
30 16 30 16 30 16 30 16
Contact block
B11 R NA B110HE-DN2 1NO+1NC NA B110HH-DN2 1NO+1NC NA B112KA-DN2 1NO+1NC NA B112KB-DN2 1NO+1NC

B02 R NA B020HE-DN2 2NC NA B020HH-DN2 2NC NA B022KA-DN2 2NC NA B022KB-DN2 2NC

B12 R NA B120HE-DN2 1NO+2NC NA B120HH-DN2 1NO+2NC NA B122KA-DN2 1NO+2NC NA B122KB-DN2 1NO+2NC

B22 R NA B220HE-DN2 2NO+2NC NA B220HH-DN2 2NO+2NC NA B222KA-DN2 2NO+2NC NA B222KB-DN2 2NO+2NC

G11 L / / NA G112KA-DN2 1NO+1NC NA G112KB-DN2 1NO+1NC

G02 L NA G020HE-DN2 2NC NA G020HH-DN2 2NC NA G022KA-DN2 2NC NA G022KB-DN2 2NC

G12 L / / NA G122KA-DN2 1NO+2NC NA G122KB-DN2 1NO+2NC

G22 L / / NA G222KA-DN2 2NO+2NC NA G222KB-DN2 2NO+2NC

Max. speed 1 m/s 1 m/s page 225 - type 1 page 225 - type 1
Actuating force 0.07 Nm 0.03 Nm 0.07 Nm (0.25 Nm ) 0.07 Nm (0.25 Nm )
Travel diagrams page 226 - group 4 page 226 - group 4 page 226 - group 5 page 226 - group 5

With steel roller with self-lubrication With steel roller with self-lubrication With steel roller with self-lubrication With steel roller with self-lubrication
Contact type or 316L stainless steel on request or 316L stainless steel on request or 316L stainless steel on request or 316L stainless steel on request
R = snap action
L = slow action
31.2
45.7 20.9
40.1 0
6.4 Ø2
24.4 12
Ø20
8.7 10.3 48.6 (43.6-50.6)
4
4

Ø1
Ø1

8.7 10.3 40 (35-42)

8.7 10.3 33 (28-35)

8.7 10.3 33 (28-35)

5.4 7
5.4 7

18.1
18.1

18.1
18.1

Ø4. Ø4. Ø4. Ø4.

20 3 20 3 20 3 20 3
51.7

51.7

51.7

51.7
43

43

43

43

30 16 30 16 30 16 30 16
Contact block
B11 R NA B112KC-DN2 1NO+1NC NA B112KD-DN2 1NO+1NC NA B112KE-DN2 1NO+1NC NA B112KF-DN2 1NO+1NC

B02 R NA B022KC-DN2 2NC NA B022KD-DN2 2NC NA B022KE-DN2 2NC NA B022KF-DN2 2NC

B12 R NA B122KC-DN2 1NO+2NC NA B122KD-DN2 1NO+2NC NA B122KE-DN2 1NO+2NC NA B122KF-DN2 1NO+2NC

B22 R NA B222KC-DN2 2NO+2NC NA B222KD-DN2 2NO+2NC NA B222KE-DN2 2NO+2NC NA B222KF-DN2 2NO+2NC

G11 L NA G112KC-DN2 1NO+1NC NA G112KD-DN2 1NO+1NC NA G112KE-DN2 1NO+1NC NA G112KF-DN2 1NO+1NC

G02 L NA G022KC-DN2 2NC NA G022KD-DN2 2NC NA G022KE-DN2 2NC NA G022KF-DN2 2NC

G12 L NA G122KC-DN2 1NO+2NC NA G122KD-DN2 1NO+2NC NA G122KE-DN2 1NO+2NC NA G122KF-DN2 1NO+2NC

G22 L NA G222KC-DN2 2NO+2NC NA G222KD-DN2 2NO+2NC NA G222KE-DN2 2NO+2NC NA G222KF-DN2 2NO+2NC

Max. speed page 225 - type 1 page 225 - type 1 page 225 - type 1 page 225 - type 1
Actuating force 0.07 Nm (0.25 Nm ) 0.07 Nm (0.25 Nm ) 0.07 Nm (0.25 Nm ) 0.07 Nm (0.25 Nm )
Travel diagrams page 226 - group 5 page 226 - group 5 page 226 - group 5 page 226 - group 5

NB series housing M12 connector, right M12 connector, bottom AMP Superseal 1.5 connector

38
8.7

5.3
M12 x 1

25 20 20 20
30.3
51.7

30.3
51.7

12.1
65.7
43

43

85.4
26.7

39.1

30 16 42.1 16
30 M12 x 1
31.7
To order a product of the NB series, To order a product with M12 right To order a product with M12 bottom To order a product with AMP connector,
replace NA with NB in the codes shown connector, replace DN2 with DMK in the connector, replace DN2 with SMK in the replace DN2 with SAK in the codes shown
above. Example: codes shown above. Example: codes shown above. Example: above. Example:
NA B110AA-DN2  NB B110AA-DN2 NA B110AA-DN2  NA B110AA-DMK NA B110AA-DN2  NA B110AA-SMK NA B110AA-DN2  NA B110AA-SAK

All values in the drawings are in mm Accessories See page 195  The 2D and 3D files are available at www.pizzato.com

109 General Catalogue Detection 2025-2026

 4

With steel roller with self-lubrication With steel roller with self-lubrication With steel roller with self-lubrication
Square rod, 3x3 mm, stainless steel
Contact type or 316L stainless steel on request or 316L stainless steel on request or 316L stainless steel on request
R = snap action
4.5 26.5
L = slow action
31.2
35.2 41.2 0 20.9
Ø2 3x3x125
16.9 10.9

19 - 116
Ø20 Ø20

43 (38-45)

27 - 93
8.7 10.3 40 (35-42)
7
7 7

18.1
18.1

18.1

18.1
8.7 10.3

8.7 10.3
8.7 10.3
Ø4. Ø4. Ø4. Ø4.
20 3 20 3 3 3
51.7

51.7

51.7

51.7
43

43

43

43
20 20
30 16 30 16 30 16 30 16
Contact block
B11 R NA B112KG-DN2 1NO+1NC NA B112KH-DN2 1NO+1NC NA B112KP-DN2 1NO+1NC NA B112LB-DN2 1NO+1NC

B02 R NA B022KG-DN2 2NC NA B022KH-DN2 2NC NA B022KP-DN2 2NC NA B022LB-DN2 2NC

B12 R NA B122KG-DN2 1NO+2NC NA B122KH-DN2 1NO+2NC NA B122KP-DN2 1NO+2NC NA B122LB-DN2 1NO+2NC

B22 R NA B222KG-DN2 2NO+2NC NA B222KH-DN2 2NO+2NC NA B222KP-DN2 2NO+2NC NA B222LB-DN2 2NO+2NC

G11 L NA G112KG-DN2 1NO+1NC NA G112KH-DN2 1NO+1NC NA G112KP-DN2 1NO+1NC NA G112LB-DN2 1NO+1NC

G02 L NA G022KG-DN2 2NC NA G022KH-DN2 2NC NA G022KP-DN2 2NC NA G022LB-DN2 2NC

G12 L NA G122KG-DN2 1NO+2NC NA G122KH-DN2 1NO+2NC NA G122KP-DN2 1NO+2NC NA G122LB-DN2 1NO+2NC

G22 L NA G222KG-DN2 2NO+2NC NA G222KH-DN2 2NO+2NC NA G222KP-DN2 2NO+2NC NA G222LB-DN2 2NO+2NC

Max. speed page 225 - type 1 page 225 - type 1 page 225 - type 1 1.5 m/s
Actuating force 0.07 Nm (0.25 Nm ) 0.07 Nm (0.25 Nm ) 0.07 Nm (0.25 Nm ) 0.07 Nm
Travel diagrams page 226 - group 5 page 226 - group 5 page 226 - group 5 page 226 - group 5

Round rod, Ø 3 mm, stainless steel Glass fibre rod Porcelain roller
Contact type
R = snap action
L = slow action 33
33
10 27.8 19 Ø9 19
4.5 26.5
110.5 (105.5-112.5)

Ø6x200
56.5

80.3 (75.3-82.3)
Ø3x125

56.5
19 - 189
19 - 116

7.3
18.1
18.1

18.1

18.1
8.7 10.3
8.7 10.3

8.7 10.3

8.7 10.3

Ø4. Ø4. Ø4.

3 20 3 20 3
.3
Ø4
51.7

51.7

51.7

51.7
43

43

43

43

20 20
30 16 30 16 30 16 30 16
Contact block

B11 R NA B112LE-DN2 1NO+1NC NA B112LH-DN2 1NO+1NC NA B112LL-DN2 1NO+1NC NA B112LP-DN2E24 1NO+1NC

B02 R NA B022LE-DN2 2NC NA B022LH-DN2 2NC NA B022LL-DN2 2NC NA B022LP-DN2E24 2NC

B12 R NA B122LE-DN2 1NO+2NC NA B122LH-DN2 1NO+2NC NA B122LL-DN2 1NO+2NC NA B122LP-DN2E24 1NO+2NC

B22 R NA B222LE-DN2 2NO+2NC NA B222LH-DN2 2NO+2NC NA B222LL-DN2 2NO+2NC NA B222LP-DN2E24 2NO+2NC

G11 L NA G112LE-DN2 1NO+1NC NA G112LH-DN2 1NO+1NC NA G112LL-DN2 1NO+1NC NA G112LP-DN2E24 1NO+1NC

G02 L NA G022LE-DN2 2NC NA G022LH-DN2 2NC NA G022LL-DN2 2NC NA G022LP-DN2E24 2NC

G12 L NA G122LE-DN2 1NO+2NC NA G122LH-DN2 1NO+2NC NA G122LL-DN2 1NO+2NC NA G122LP-DN2E24 1NO+2NC

G22 L NA G222LE-DN2 2NO+2NC NA G222LH-DN2 2NO+2NC NA G222LL-DN2 2NO+2NC NA G222LP-DN2E24 2NO+2NC

Max. speed 1.5 m/s 1.5 m/s 1.5 m/s 0.5 m/s
Actuating force 0.07 Nm 0.07 Nm 0.07 Nm 0.04 Nm
Travel diagrams page 226 - group 5 page 226 - group 5 page 226 - group 5 page 226 - group 5
Cable and M12 connector

20
M12 x 1

51,7
43

30 Ø 14
16

To order a product with cable and M12 connector:

replace DN2 with DM0.2 in the codes shown above. Example:
NA B110AA-DN2  NA B110AA-DM0.2

All values in the drawings are in mm Accessories See page 195  The 2D and 3D files are available at www.pizzato.com

General Catalogue Detection 2025-2026 110

4 NA-NB series modular metal pre-wired switches

Contact type
R = snap action
L = slow action

48
38 3.6 48 Ø12

2
Ø8

Ø1

3.6

20.9
20.9

20.9
8.7 10.8

8.7 10.8

8.7 10.8
Ø4. Ø4. Ø4.
20 3 20 3 20 3
51.7

51.7

51.7
43

43

43
30 16 30 16 30 16
Contact block
B11 R NA B110AB-DN2W5 1NO+1NC NA B110BB-DN2H0W5 1NO+1NC NA B110BB-DN2W5 1NO+1NC

B02 R NA B020AB-DN2W5 2NC NA B020BB-DN2H0W5 2NC NA B020BB-DN2W5 2NC

B12 R NA B120AB-DN2W5 1NO+2NC NA B120BB-DN2H0W5 1NO+2NC NA B120BB-DN2W5 1NO+2NC

B22 R NA B220AB-DN2W5 2NO+2NC NA B220BB-DN2H0W5 2NO+2NC NA B220BB-DN2W5 2NO+2NC

G11 L NA G110AB-DN2W5 1NO+1NC NA G110BB-DN2H0W5 1NO+1NC NA G110BB-DN2W5 1NO+1NC

G02 L NA G020AB-DN2W5 2NC NA G020BB-DN2H0W5 2NC NA G020BB-DN2W5 2NC

G12 L NA G120AB-DN2W5 1NO+2NC NA G120BB-DN2H0W5 1NO+2NC NA G120BB-DN2W5 1NO+2NC

G22 L NA G220AB-DN2W5 2NO+2NC NA G220BB-DN2H0W5 2NO+2NC NA G220BB-DN2W5 2NO+2NC

Max. speed page 225 - type 4 page 225 - type 2 page 225 - type 2
Actuating force 9.5 N (25 N ) 9.5 N (25 N ) 9.5 N (25 N )
Travel diagrams page 226 - group 1 page 226 - group 1 page 226 - group 1

External gasket External gasket External gasket

Contact type
R = snap action
L = slow action

162.6
148.1 148.5 87
56.5
Ø7.6

Ø1.2
Ø7

Ø7
20.9

20.9

20.9
8.7 10.8
8.7 10.8

8.7 10.8

Ø4. Ø4. Ø4.

20 3 20 3 20 3
51.7

51.7

51.7
43

43

43

30 16 30 16 30 16
Contact block
B11 R NA B110HB-DN2W5 1NO+1NC NA B110HE-DN2W5 1NO+1NC NA B110HH-DN2W5 1NO+1NC

B02 R NA B020HB-DN2W5 2NC NA B020HE-DN2W5 2NC NA B020HH-DN2W5 2NC

B12 R NA B120HB-DN2W5 1NO+2NC NA B120HE-DN2W5 1NO+2NC NA B120HH-DN2W5 1NO+2NC

B22 R NA B220HB-DN2W5 2NO+2NC NA B220HE-DN2W5 2NO+2NC NA B220HH-DN2W5 2NO+2NC

G11 L / / /
G02 L NA G020HB-DN2W5 2NC NA G020HE-DN2W5 2NC NA G020HH-DN2W5 2NC

G12 L / / /
G22 L / / /
Max. speed 1 m/s 1 m/s 1 m/s
Actuating force 0.08 Nm 0.12 Nm 0.08 Nm
Travel diagrams page 226 - group 4 page 226 - group 4 page 226 - group 4

NB series housing M12 connector, right M12 connector, bottom AMP Superseal 1.5 connector

38
8.7

5.3
M12 x 1

25 20 20 20
30.3
51.7

30.3
51.7

12.1
65.7
43

43

85.4
26.7

39.1

30 16 42.1 16
30 M12 x 1
31.7
To order a product of the NB series, To order a product with M12 right To order a product with M12 bottom To order a product with AMP connector,
replace NA with NB in the codes shown connector, replace DN2 with DMK in the connector, replace DN2 with SMK in the replace DN2 with SAK in the codes shown
above. Example: codes shown above. Example: codes shown above. Example: above. Example:
NA B110AA-DN2  NB B110AA-DN2 NA B110AA-DN2  NA B110AA-DMK NA B110AA-DN2  NA B110AA-SMK NA B110AA-DN2  NA B110AA-SAK

All values in the drawings are in mm Accessories See page 195  The 2D and 3D files are available at www.pizzato.com

111 General Catalogue Detection 2025-2026

 4

Accessories Packs of 10 pcs.

Article Description
VN DT1F Spacer for NA and NF series
VF D16B Spacer for NB series
By placing spacers between 16 16
the switches, 2 or more
pre-wired switches can be
mounted side by side, pre-
venting them from moving
with respect to each other.

M12 female connectors with cable

Features:
• Polyurethane connector body
• Class 6 copper conductors acc. to IEC 60228 - mobile installation
• Gold-plated contacts
• Anti-vibration self-locking ring nut made of nickel-plated brass, available on request in AISI 316L
stainless steel hex version
• High flexibility cable with oil resistant PVC or PUR sheath suitable to be used in drag chains, acc.
to IEC 60332-1-2

Code structure Attention! The feasibility of a code number does not mean the effective availability of a product. Please contact our sales office.

article options
Stock items
VF CA4PD3M-X VF CA4PD3M
VF CA4PD5M
No. of poles Connection type Fixing ring VF CA4PD10M
VF CA5PD3M
4 4 poles M M12x1 knurled ring (standard) VF CA5PD5M
5 5 poles X stainless steel hex ring nut VF CA5PD10M
8 8 poles VF CA8PD3M
Cable length (L) VF CA8PD5M
12 12 poles
1 1 metre VF CA8PD10M
VF CA8PD20M
Cable sheath 2 2 metres
VF CA12PD3M
P PVC (standard) 3 3 metres (standard) VF CA12PD5M
U PUR 4 4 metres VF CA12PD10M
VF CA12PD20M
5 5 metres (standard)
Connector type VF CA12PD30M
… VF CA8UD5M-X
D straight (standard) Attention! For items not in
10 10 metres (standard) VF CA8UD10M-X
stock the minimum order quan-
G angled Other lengths on request. tity is 100 pcs. VF CA12UD10M-X

Field wireable M12 female connectors

General data
Technopolymer connector body
Gold-plated contacts
Screw terminals for cable screw fittings
Max. operating voltages 250 Vac/dc (4 and 5-pole)
30 Vac/dc (8-pole)
Maximum current 4 A (4 and 5-pole)
2 A (8-pole)
Protection degree IP67 acc. to EN 60529
Ambient temperature -25°C ... +85°C
Wire cross-section 0.25 mm2 (23 AWG) … 0.5 mm2 (20 AWG)
Tightening torque: 0.6 … 0.8 Nm

Article Description no. of poles

VF CBMP4DM04 Field wireable M12 female connector, straight, for Ø 4 … Ø 6.5 mm multipolar cables 4
VF CBMP5DM04 Field wireable M12 female connector, straight, for Ø 4 … Ø 6.5 mm multipolar cables 5
VF CBMP8DM04 Field wireable M12 female connector, straight, for Ø 4 … 7 mm multipolar cables 8

 The 2D and 3D files are available at www.pizzato.com

General Catalogue Detection 2025-2026 112