Scribd
Upload
31 views1 page

HT Ing 2240p

The document provides a technical data sheet for Impact Copolymer 2240 P, which is primarily used for injection molding applications requiring high stiffness and impact resistance. It includes detailed properties such as melt flow index, mechanical and thermal properties, and compliance with FDA regulations. The product is not intended for medical/pharmaceutical use, and users are responsible for ensuring compliance with relevant laws and conducting their own tests.

Uploaded by

Fernando Szellner
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
31 views1 page

HT Ing 2240p

The document provides a technical data sheet for Impact Copolymer 2240 P, which is primarily used for injection molding applications requiring high stiffness and impact resistance. It includes detailed properties such as melt flow index, mechanical and thermal properties, and compliance with FDA regulations. The product is not intended for medical/pharmaceutical use, and users are responsible for ensuring compliance with relevant laws and conducting their own tests.

Uploaded by

Fernando Szellner
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

PETROQUIMICA CUYO S.A.I.C.

Avenida Madero 942 - Piso 10° (C1106ACW)


Ciudad Autónoma de Buenos Aires, Argentina
Tel.: (54-11) 5167-2700

Technical Data Sheet

Impact Copolymer 2240 P


MAIN USE: INJECTION MOULDING GENERAL PROPERETIES
 Recommended for injection moulding of  High stiffness, similar to PP homopolymers
articles which require high stiffness and but better impact resistance
good impact resistance at room  Good flowability
temperature (such as housewares, garden  Good surface gloss
furniture, crates and containers)

PROPERTIES METHOD UNIT VALUE

Melt Flow Index (230°C/2.16 kg) ISO 1133 g/10 min 15

MECHANICAL PROPERTIES

Flexural Modulus (1) ISO 178 MPa 1500


Tensile strength at yield (2) ISO 527-2 MPa 31
Elongation at yield (2) ISO 527-2 % 6
Charpy notched Impact Strength (1) @ 23°C ISO 179 KJ/m2 7
@ 0°C ISO 179 KJ/m2 3
@ -30°C ISO 179 KJ/m2 2

THERMAL PROPERTIES

Heat Deflection Temperature HDT/A (1,80 MPa) (1) ISO 75-2 °C 55


Heat Deflection Temperature HDT/B (0,45 MPa) (1) ISO 75-2 °C 95

NOTES:
(1) Injection-molded specimen of 4 mm * 10 mm * 80 mm
(2) Injection-molded according to ISO 3167/A
This product complies with FDA regulations for polymeric olefins (21 CFR 177, 1520).
This product was approved by SENASA with E-469 Certificate.
Products for the medical/pharmaceutical sector are required to meet specific regulations. Petrocuyo products were not designed to fulfill those
requirements so the use of them in such applications relies entirely on costumer responsibility.

This information is based on our present state of knowledge and is intended to provide general notes on this product and its use. In view of the many
factors that may affect processing and application, these data do not relieve processors from the responsibility of carrying out their own tests and
experiments; neither do they imply any legally binding assurance of certain properties or of suitability for a specific purpose. It is the responsibility of
those to whom we supply Petrocuyo to ensure that any proprietary rights and existing laws and legislation are observed. Company reserves the
right to modify characteristics and/or properties of products without prior notice. Consult Material Safety Data Sheet (MSDS) for information on safety,
handling, personal protection, first aid and deposal considerations. CAS Registry: 9010-79-1. Costumer service: infotecnica@petrocuyo.com.

Fecha; 30/10/2019 12:13:26 p.m./ Revisión: 1.0

You might also like