Material

Specification Detailed Specs

Description

Single core PVC Sheathed Armoured Cables

Nominal cross-sectional areamm²500
Insulation thickness:mm2.8
Sheath thickness:mm2.1
Approximate overall diameter: mm38.8
Approximate weight of cable:kg/m5.238
Number of stranded Copper Conductor/ Diameter of copper wire61 / 3.23mm
DC resistance @20°C:Ω/km0.0366
500MM X 1C LV "Continuous current carrying capacity (as per conditions detailed below)
PVC/SWA/PVC
CABLE Direct buried:"Amps693
"Continuous current carrying capacity (as per conditions detailed below)
In air: "Amps749
Rated Voltage:400V
Highest System Voltage:V660/1000
Method of sheathing:XLPE/PVC
InstallationOutdoor
IP RatingIP67
Maximum permissible Conductor Temperature:70°C

150mm2 All Aluminum Conductor (AAC)

Size: 150mmsq
Strands:19
Diameter: 3.25mm
150MM2 ALUM. Calculated DC Resistance @
AAC
CONDUCTOR 20 degree Ohm/Km: 0.1825
Calculated Breaking Load: 25.7
Current Rating: 400A

Reference: IEC 42341, 43216, BS 215 Part 1

 Four core PVC Sheathed Armoured cables
Nominal cross-sectional areamm²150
Insulation thicknessmm1.8
Sheath thicknessmm2.5
Approximate overall diametermm46.6
Approximate weight of cablekg/m6549
Number of stranded Copper Conductor/ Diameter of copper wire37 / 2.28mm
DC resistance @20°CΩ/km0.124
150MM2 X 4C LV "Continuous current carrying capacity (as per conditions detailed below)
PVC/SWA/PVC
CABLE Direct buried:"Amps300
"Continuous current carrying capacity (as per conditions detailed below)
In air:"Amps245
Rated Voltage:400V
Highest System Voltage:660/1000
Method of sheathing:XLPE/SWA/PVC
InstallationOutdoor
IP RatingIP67
Maximum permissible Conductor Temperature:70°C

70mm2 Copper Earth Wire

Technical Data
Type of Conductor: Copper Bare
70MM2 COPPER Nominal Cross Sectional Area (mm2):70
BARE
WIRE Overall Diameter (mm): 11
Number and nominal dia. of strands No/mm: 19/2.14
DC Resistance Ω/km:0.268
Reference: IEC 60228, BS 4109
 Single core PVC Sheathed Armoured Cables
Nominal cross-sectional areamm²300
Insulation thickness:mm2.4
Sheath thickness:mm1.9
Approximate overall diameter: mm31.5
Approximate weight of cable:kg/m3.312
Number of stranded Copper Conductor/ Diameter of copper wire61 / 2.57mm
DC resistance @20°C:Ω/km0.0601
300MM2 X 1C LV "Continuous current carrying capacity (as per conditions detailed below)
PVC/PVC
CABLE Direct buried:"Amps541
"Continuous current carrying capacity (as per conditions detailed below)
In air: "Amps561
Rated Voltage:400V
Highest System Voltage:V660/1000
Method of sheathing:XLPE/PVC
InstallationOutdoor
IP RatingIP67
Maximum permissible Conductor Temperature:70°C

Number of cores x nominal cross section4x 25mm sq

Application:Overhead (3 Phase)
Voltage:0.6 - 1 kV
Current:AC Cable
Insulation Material:XLPE
Sheath Material:HDPE
Material Shape:Round Wire
Wire Core MaterialAluminium
25MM X 4C max. conductor- resistance (Ohm/km)1.200
XLPE
RETILINE CABLE min. breaking load of conductor strand (kN)4
Current rating in the air (Amps)107
Outer diameter (mm)212
Total weight (kg/km)430
Tickness of insulation (mm)2
Colour"3 Phases- Red, Yellow Blue
Neutral- Black"
EngravementIkeja Electric, Cable Size, Cable Length Numbering, Insulation
Material
 Four core PVC Sheathed Armoured cables
Nominal cross-sectional areamm²70
Insulation thicknessmm1.4
Sheath thicknessmm2
Approximate overall diametermm34.2
Approximate weight of cablekg/m3176
Number of stranded Copper Conductor/ Diameter of copper wire
DC resistance @20°CΩ/km0.268
70MM2 X 4C LV "Continuous current carrying capacity (as per conditions detailed below)
PVC/SWA/PVC
CABLE Direct buried:"Amps195
"Continuous current carrying capacity (as per conditions detailed below)
In air:"Amps145
Rated Voltage:400V
Highest System Voltage:660/1000
Method of sheathing:XLPE/SWA/PVC
InstallationOutdoor
IP RatingIP67
Maximum permissible Conductor Temperature:70°C
Number of cores x nominal cross section
4x 35mm sq
Application:Overhead (3 Phase)
Voltage:0.6 - 1 kV
Current:AC Cable
Insulation Material:XLPE
Sheath Material:HDPE
Material Shape:Round Wire
Wire Core MaterialAluminium
35MM X 4C
XLPE max. conductor- resistance (Ohm/km)0.868
RETILEN CABLE
min. breaking load of conductor strand (kN)5.5
Current rating in the air (Amps)132
Outer diameter (mm)241
Total weight (kg/km)553
Tickness of insulation (mm)2
Colour"3 Phases- Red, Yellow Blue
Neutral- Black"
EngravementIkeja Electric, Cable Size, Cable Length Numbering, Insulation
Material
 150mm2 Aluminum Conductor Steel Reinforced (ACSR)
Size: 150mm sq
Strands/Wire Diameter (Aluminum):18/3.25mm
Strands/Wire Diameter (Steel): 1/3.25mm
Sectional Area (Aluminum): 158.10mm sq
Sectional Area (Steel): 36.80mm sq
150MM2 ACSR
ACSR Total Cross Sectional Area: 194.90mm sq
CONDUCTOR
"Calculated DC Resistance @
20 degree Ohm/Km:"0.1828
Calculated Breaking Load: 69.2
Current Rating: 470A

Reference: IEC 61089, BS 215 Part 2

4X4MM
CONTROL Armoured
CABLE

95MM2 X 4C
XLPE
RETILEN CABLE

12X2.5MM
CONTROL Armoured PVC
CABLE
50MM X 4C LV
PVC/SWA/PVC
CABLE

2.5MM X4C
PVC
FLEXIBLE CORE

2.5MM2 X 4C
ARMOURED PVC Armoured
CABLE
2.5MM x 7C
Armoured
Control Cable
2.5MM2 X 19C
CONTROL Armoured
CABLE
150MM2
BARE
COPPER WIRE
35MM2 X 4C LV
PVC/SWA/PVC
CABLE
Nominal cross-sectional areamm²70
Diameter over conductormm9.8
Approximate diameter over insulationmm27
Approximate overall diametermm43
Approximate weight of cablekg/m2450
Minimum bending radius (static)mm900
Maximum pulling tension on cablekg350
Maximum DC resistance @20°CΩ/km0.268
Maximum AC resistance@90°CΩ/km0.342
InductancemH/km0.482
Reactance @ 50HzΩ/km0.152
Impedance @ 50Hz @ 90°CΩ/km.379.374
Maximum capacitance ©µF/km0.155
Maximum charging currentA/km0.93
7Omm sq. X IC Short circuit ratings
70MM2 X IC
33kV XLPE "1 second short circuit-rating of
33KV XLPE
Armoured conductor (90 to 250°C)"kA9.7
CABLE "1 second short circuit-rating of
CABLE
metallic screen (80 to 200°C)"kA9.7
Continuous current carrying capacity (as per conditions detailed below)
Direct buriedAmps270
Single way ductsAmps260
In airAmps320
CoreCopperCopper
InsulationXLPEXLPE
ArmourAluminium Wire Armoured Aluminium Wire Armoured
SheathPVCPVC
Rated Frequency50Hz50Hz
One minute Power Frequency withstand Voltage75kVrms
Basic Insulation Level BIL (1.2/50 microseconds)170kVrms
Maximum Initial symmetrical 3Phase fault current31.5kArms
StandardIEC 60228IEC 60228
 Single core Armoured XLPE cables (copper) for 11kV
Nominal cross-sectional areamm²500
Diameter over conductormm26.2
Approximate diameter over insulationmm35
Approximate overall diameter mm53
Approximate weight of cablekg/m6700
Minimum bending radius (static) mm1050
Maximum pulling tension on cablekg2500
Maximum DC resistance @20°CΩ/km0.0366
Maximum AC resistance@90°CΩ/km0.0502
Inductance mH/km0.32
Reactance @ 50HzΩ/km0.1
Impedance @ 50Hz @ 90°CΩ/km0.112
Maximum capacitance ©µF/km0.623
500mm sq X Maximum charging currentA/km1.24
500KV X 1C
1C 11kV XLPE Short circuit ratings
11KV H.T
Armoured "1 second short circuit-rating of
CABLE conductor (90 to 250°C)"kA>60
CABLE
"1 second short circuit-rating of
metallic screen (80 to 200°C)"kA19.6
Continuous current carrying capacity (as per conditions detailed below)
Direct buriedAmps710
Single way ductsAmps570
In air Amps930
CoreCopperCopper
InsulationXLPEXLPE
ArmourAluminium Wire Armoured Aluminium Wire Armoured
SheathPVCPVC
Rated Frequency50Hz50Hz
One minute Power Frequency withstand Voltage28kV
Basic Insulation Level BIL (1.2/50 microseconds)170kV
Maximum Initial symmetrical 3Phase fault current25kA
 Nominal cross-sectional areamm²35
Diameter over conductormm9.8
Approximate diameter over insulationmm17.8
Approximate overall diameter mm32
Approximate weight of cablekg/m1650
Minimum bending radius (static) mm650
Maximum pulling tension on cablekg350
Maximum DC resistance @20°CΩ/km0.268
Maximum AC resistance@90°CΩ/km0.342
Inductance mH/km0.422
Reactance @ 50HzΩ/km0.133
Impedance @ 50Hz @ 90°CΩ/km0.367
Maximum capacitance ©µF/km0.289
Maximum charging currentA/km0.58
35mm sq. X Short circuit ratings
35MM2 X 1C 1C 11kV XLPE "1 second short circuit-rating of
XLPE CABLE Armoured conductor (90 to 250°C)"kA9.7
CABLE "1 second short circuit-rating of
metallic screen (80 to 200°C)"kA7.6
Continuous current carrying capacity (as per conditions detailed below)
Direct buriedAmps270
Single way ductsAmps360
In air Amps310
CoreCopperCopper
InsulationXLPEXLPE
ArmourAluminium Wire Armoured Aluminium Wire Armoured
SheathPVCPVC
Rated Frequency50Hz50Hz
One minute Power Frequency withstand Voltage28kV
Basic Insulation Level BIL (1.2/50 microseconds)170kV
Maximum Initial symmetrical 3Phase fault current25kA
InstallationOutdoor
 Three core Armouned XLPE cables (copper) for 33KV
Nominal cross-sectional areamm²3x240
Diameter over conductormm18.4
Approximate diameter over insulationmm35.6
Approximate overall diameter mm95
Approximate weight of cablekg/m13200
Minimum bending radius (static) mm1450
Maximum pulling tension on cablekg3600
Maximum DC resistance @20°CΩ/km0.0754
Maximum AC resistance@90°CΩ/km0.0978
Inductance mH/km0.348
Reactance @ 50HzΩ/km0.109
Impedance @ 50Hz @ 90°CΩ/km0.147
Maximum capacitance ©µF/km0.228
240mm sq. X Maximum charging currentA/km1.36
240MM X3C 3C 33kV XLPE Short circuit ratings
33KV CABLE Armoured "1 second short circuit-rating of
CABLE conductor (90 to 250°C)"kA34.6
"1 second short circuit-rating of
metallic screen (80 to 200°C)"kA5.7
Continuous current carrying capacity (as per conditions detailed below)
Direct buriedAmps490
Single way ductsAmps435
In air Amps580
CoreCopperCopper
InsulationXLPEXLPE
ArmourDouble Steel Wire Armoured Double Steel Wire Armoured
SheathPVCPVC
Rated Frequency50Hz50Hz
StandardIEC 60228IEC 60228
One minute Power Frequency withstand Voltage75kVrms
Basic Insulation Level BIL (1.2/50 microseconds)170kVrms
 Nominal cross-sectional areamm²240
Diameter over conductormm18.4
Approximate diameter over insulationmm35.6
Approximate overall diametermm54
Approximate weight of cablekg/m4800
Minimum bending radius (static)mm1100
Maximum pulling tension on cablekg1200
Maximum DC resistance @20°CΩ/km0.0754
Maximum AC resistance@90°CΩ/km0.0974
InductancemH/km0.4
Reactance @ 50HzΩ/km0.126
Impedance @ 50Hz @ 90°CΩ/km0.159
Maximum capacitance ©µF/km0.228
240mm sq. X Maximum charging currentA/km1.36
240MM2 X IC Short circuit ratings
IC 33kV XLPE
33KV XLPE "1 second short circuit-rating of
Armoured conductor (90 to 250°C)"kA34.6
CABLE
CABLE "1 second short circuit-rating of
metallic screen (80 to 200°C)"kA20
Continuous current carrying capacity (as per conditions detailed below)
Direct buriedAmps520
Single way ductsAmps450
In airAmps650
CoreCopperCopper
InsulationXLPEXLPE
ArmourAluminium Wire Armoured Aluminium Wire Armoured
SheathPVCPVC
Rated Frequency50Hz50Hz
One minute Power Frequency withstand Voltage75kVrms
Basic Insulation Level BIL (1.2/50 microseconds)170kVrms
Maximum Initial symmetrical 3Phase fault current31.5kArms
 Three core Armoured XLPE cables (copper) for 11KV
Nominal cross-sectional areamm²3x150
Diameter over conductormm14.3
Approximate diameter over insulationmm22.3
Approximate overall diameter mm72
Approximate weight of cablekg/m7400
Minimum bending radius (static) mm900
Maximum pulling tension on cablekg1350
Maximum DC resistance @20°CΩ/km0.206
Maximum AC resistance@90°CΩ/km0.265
Inductance mH/km0.31
Reactance @ 50HzΩ/km0.97
Impedance @ 50Hz @ 90°CΩ/km0.282
Maximum capacitance ©µF/km0.382
150mm sq. X Maximum charging currentA/km0.76
150MM2 X 3C 3C 11kV XLPE Short circuit ratings
XLPE CABLE Armoured "1 second short circuit-rating of
CABLE conductor (90 to 250°C)"kA13.9
"1 second short circuit-rating of
metallic screen (80 to 200°C)"kA13.9
Continuous current carrying capacity (as per conditions detailed below)
Direct buriedAmps300
Single way ductsAmps255
In air Amps330
CoreCopperCopper
InsulationXLPEXLPE
ArmourDouble Steel Wire Armoured Double Steel Wire Armoured
SheathPVCPVC
Rated Frequency50Hz50Hz
One minute Power Frequency withstand Voltage28kV
Basic Insulation Level BIL (1.2/50 microseconds)170kV
Maximum Initial symmetrical 3Phase fault current25kA